qwen-code/docs/developers/daemon/20-quickstart-operations.md

Quickstart & Operations

This page focuses on how to start qwen serve, how to verify that it is working, and what the internal call chain looks like from qwen serve to the listening server. Architecture, components, and wire protocol details live in the other daemon deep-dive pages.

1. Shortest path

qwen serve

Output:

qwen serve listening on http://127.0.0.1:4170 (mode=http-bridge, workspace=/your/cwd)
qwen serve: bound to workspace "/your/cwd"
qwen serve: bearer auth disabled (loopback default). Set QWEN_SERVER_TOKEN to enable.

Open http://127.0.0.1:4170/demo in a browser to see the debug console: chat UI, event stream, and workspace inspection. In the default loopback dev mode, createServeApp() mounts the /demo route from packages/cli/src/serve/routes/health-demo.ts before bearerAuth, so no token is required.

2. Launch recipes

# 1. Local dev default (loopback, no token)
qwen serve

# 2. Explicit workspace + ephemeral port
qwen serve --workspace /path/to/repo --port 0

# 3. Hardened loopback development (force bearer even on loopback)
QWEN_SERVER_TOKEN=$(openssl rand -hex 32) qwen serve --require-auth

# 4. Expose to LAN (non-loopback requires a token)
QWEN_SERVER_TOKEN=$(openssl rand -hex 32) \
  qwen serve --hostname 0.0.0.0 --port 4170

# 5. Tune for many sessions and a larger replay ring
qwen serve --max-sessions 0 --event-ring-size 32000

# 6. Multi-client collaboration + strict MCP budget
QWEN_SERVER_TOKEN=secret \
  qwen serve --require-auth \
             --mcp-client-budget 10 \
             --mcp-budget-mode enforce

# 7. Start with a consensus policy configured in settings.json
# settings.json: { "policy": { "permissionStrategy": "consensus", "consensusQuorum": 2 } }
qwen serve

# 8. Debug logging
QWEN_SERVE_DEBUG=1 qwen serve

# 9. Disable the F2 pool (fallback to per-session MCP clients)
QWEN_SERVE_NO_MCP_POOL=1 qwen serve

# 10. Allow browser web UI cross-origin access
QWEN_SERVER_TOKEN=secret \
  qwen serve --allow-origin 'http://localhost:3000'

# 11. Prompt deadline + SSE idle timeout
qwen serve --prompt-deadline-ms 300000 --writer-idle-timeout-ms 600000

# 12. Keep the ACP child warm after the last session closes
qwen serve --channel-idle-timeout-ms 60000

# 13. Enable HTTP rate limiting
QWEN_SERVE_RATE_LIMIT=1 qwen serve

With the hardened loopback recipe (3), /demo is registered after bearerAuth. A normal browser navigation needs an auth header, so use curl or an SDK script instead.

3. Full startup flags

The CLI is defined in packages/cli/src/commands/serve.ts:

Flag	Type	Default	Required when	Effect
--port <n>	number	4170	-	TCP port; 0 means OS-assigned ephemeral port.
--hostname <host>	string	127.0.0.1	Non-loopback requires token	Bind address. Loopback values: 127.0.0.1, localhost, ::1, [::1]. [::1] brackets are stripped automatically; host:port input is rejected with guidance to use --port.
--token <s>	string	env / none	Non-loopback and --require-auth	Bearer token; trimmed once. It appears in /proc/<pid>/cmdline, so prefer QWEN_SERVER_TOKEN. Boot stderr also warns about this.
--max-sessions <n>	number	20	-	Per-workspace active session cap. Excess spawn returns 503. 0 means unlimited. NaN / negative values throw.
--max-total-sessions <n>	number	derived for multiple startup/restored workspaces	-	Daemon-wide active session cap. When omitted, a finite default is derived once from the per-workspace cap and startup/restored workspace count; dynamic registration does not recompute it. 0 means unlimited.
--max-pending-prompts-per-session <n>	number	5	-	Accepted but pending/running prompt cap per session. Excess prompt returns 503. 0 / Infinity means unlimited. Negative or non-integer values throw.
--workspace <dir>	string / repeatable	process.cwd()	-	Startup workspace runtime; repeat to register additional isolated runtimes. The first is primary. Each value must be an absolute path, must exist, and must be a directory. Boot canonicalizes every value via canonicalizeWorkspace. POST /session with a mismatched cwd returns 400 workspace_mismatch.
--max-connections <n>	number	256	-	Listener-level server.maxConnections. 0 / Infinity means unlimited. NaN / negative values fail boot to avoid fail-open behavior.
--require-auth	boolean	false	Token required	Extends bearer auth to loopback and /health. Boot refuses to start without a token.
--enable-session-shell	boolean	false	Token required	Enables direct POST /session/:id/shell execution. Callers must also send a session-bound X-Qwen-Client-Id.
--event-ring-size <n>	number	8000	-	Per-session SSE replay ring depth. Soft cap is MAX_EVENT_RING_SIZE = 1_000_000; out-of-range values throw during bridge construction.
--http-bridge	boolean	true	-	Bridge mode: production attempts to preheat one primary qwen --acp child and retries on first use after failure; trusted secondaries start one on demand, while untrusted secondaries cannot start ACP. Stage 2 in-process mode is not implemented yet; --no-http-bridge falls back and prints to stderr.
--mcp-client-budget <n>	number	none	Required for mcp-budget-mode=enforce	Workspace MCP client cap. Must be a positive integer.
--mcp-budget-mode <m>	'enforce' | 'warn' | 'off'	warn when a budget is set, otherwise off	enforce requires --mcp-client-budget	enforce refuses, warn only warns at 75%, off is observation only.
--allow-origin <pattern>	repeatable string	none	-	CORS allowlist that replaces the default Origin denial. * requires a token.
--allow-private-auth-base-url	boolean	false	-	Allows localhost / private-network auth provider baseUrl installation. Use only for trusted local development.
--prompt-deadline-ms <n>	number	none	-	Server-side prompt wallclock limit in ms; timeout aborts the prompt.
--writer-idle-timeout-ms <n>	number	none	-	Per-SSE-connection idle timeout in ms.
--channel-idle-timeout-ms <n>	number	0	-	Keeps the ACP child alive after the last session closes. 0 means reclaim immediately.
--initialize-timeout-ms <n>	number	10000	-	ACP child request timeout, including the initialize handshake (ms).
--session-reap-interval-ms <n>	number	60000	-	Session reaper scan interval. 0 disables it.
--session-idle-timeout-ms <n>	number	1800000	-	Disconnected-session idle timeout. 0 disables it.
--rate-limit / --no-rate-limit	boolean	env / off	-	Enables or disables per-tier HTTP rate limiting.
--rate-limit-prompt <n>	number	10	--rate-limit	Prompt requests per window.
--rate-limit-mutation <n>	number	30	--rate-limit	Mutation requests per window.
--rate-limit-read <n>	number	120	--rate-limit	Read requests per window.
--rate-limit-window-ms <n>	number	60000	--rate-limit	Rate limit window length; must be >= 1000.

4. Environment variables

Env	Equivalent flag / effect
QWEN_SERVER_TOKEN	Equivalent to --token; --token wins. Trimmed once at boot to avoid a trailing newline from cat token.txt.
QWEN_SERVE_DEBUG	1 / true / on / yes (case-insensitive) enables verbose stderr logs.
QWEN_SERVE_NO_MCP_POOL	1 disables the workspace MCP pool entirely and falls back to per-session McpClientManager. Capabilities stop advertising mcp_workspace_pool / mcp_pool_restart.
QWEN_SERVE_MCP_CLIENT_BUDGET	ACP-child internal budget input. The CLI generates it from --mcp-client-budget through childEnvOverrides; it is not a parent-process env fallback.
QWEN_SERVE_MCP_BUDGET_MODE	ACP-child internal budget mode. The CLI generates it from --mcp-budget-mode through childEnvOverrides; it is not a parent-process env fallback.
QWEN_SERVE_PROMPT_DEADLINE_MS	Env fallback for --prompt-deadline-ms.
QWEN_SERVE_WRITER_IDLE_TIMEOUT_MS	Env fallback for --writer-idle-timeout-ms.
QWEN_SERVE_MCP_POOL_TRANSPORTS	Read by the ACP child. Comma-separated pooled transport allowlist; default is stdio,websocket.
QWEN_SERVE_MCP_POOL_DRAIN_MS	Read by the ACP child. Pool entry idle drain delay; default is 30000, clamped to 1000..600000 ms.
QWEN_SERVE_RATE_LIMIT	1 / true enables rate limiting; CLI flag wins.
QWEN_SERVE_RATE_LIMIT_PROMPT	Env fallback for --rate-limit-prompt.
QWEN_SERVE_RATE_LIMIT_MUTATION	Env fallback for --rate-limit-mutation.
QWEN_SERVE_RATE_LIMIT_READ	Env fallback for --rate-limit-read.
QWEN_SERVE_RATE_LIMIT_WINDOW_MS	Env fallback for --rate-limit-window-ms.

Per-handle env overrides are intentional: two daemons running in the same process do not race on process.env. defaultSpawnChannelFactory snapshots env at spawn time.

5. settings.json is also read

Boot calls loadSettings(boundWorkspace) once:

Key	Type	Behavior
policy.permissionStrategy	'first-responder' | 'designated' | 'consensus' | 'local-only'	Sets BridgeOptions.permissionPolicy. Boot validates with validatePolicyConfig; unknown values throw InvalidPolicyConfigError instead of falling back silently.
policy.consensusQuorum	positive integer	N for the consensus policy. Default is floor(M/2)+1. If set under a non-consensus policy, it is ignored and boot logs a stderr warning.
context.fileName	string	Overrides getCurrentGeminiMdFilename() and controls which file POST /workspace/init writes.
tools.disabled	string[]	Normalized through normalizeDisabledToolList() (trim, drop empty entries, dedupe) before affecting the next ACP child spawn.
tools.approvalMode	string	Default session approval mode.
telemetry	object	OTel configuration: enabled, otlpEndpoint, otlpProtocol, per-signal endpoints, and more. See 17-configuration.md.

Settings I/O failure, such as malformed JSON, falls back to defaults. InvalidPolicyConfigError is the exception: policy misconfiguration fails boot explicitly.

6. Boot refusal scenarios (explicit failures)

run-qwen-serve.ts intentionally throws instead of falling back in these cases:

Scenario	Error prefix
Non-loopback bind without token	Refusing to bind ... without a bearer token
--require-auth without token	Refusing to start with --require-auth set but no bearer token
--workspace does not exist, is not a directory, or is not absolute	Invalid --workspace ...
--workspace stat permission denied	Invalid --workspace ...: permission denied
--mcp-client-budget is not a positive integer	Must be a positive integer
--mcp-budget-mode=enforce without budget	requires a positive mcpClientBudget
--hostname is written as localhost:4170	looks like a "host:port" combination. Use --port
--hostname [::1]:8080	Invalid --hostname ... brackets indicate an IPv6 literal but the value is not a clean [addr] form
--max-connections is NaN or negative	Must be >= 0
--event-ring-size > 1_000_000	Thrown during bridge construction
--allow-origin '*' without token	Refusing to start with --allow-origin '*' but no bearer token configured
--prompt-deadline-ms / --writer-idle-timeout-ms is not a positive integer	Must be a positive integer
--initialize-timeout-ms is not a positive integer or exceeds 2^31-1	Must be a positive integer / Exceeds maximum JS timer delay
Unknown policy.permissionStrategy or non-positive policy.consensusQuorum	InvalidPolicyConfigError

7. Curl verification checklist

# 1. Liveness
curl http://127.0.0.1:4170/health
# -> {"status":"ok"}

# 1.1 Deep health
curl -s 'http://127.0.0.1:4170/health?deep=1' | jq

# 2. Capabilities
curl -s http://127.0.0.1:4170/capabilities | jq

# 3. Preflight readiness
curl -s http://127.0.0.1:4170/workspace/preflight | jq

# 4. Env snapshot (secrets only report presence)
curl -s http://127.0.0.1:4170/workspace/env | jq

# 5. MCP pool / budget snapshot
curl -s http://127.0.0.1:4170/workspace/mcp | jq

# 6. Create a session
curl -s -X POST http://127.0.0.1:4170/session \
  -H 'Content-Type: application/json' \
  -H 'X-Qwen-Client-Id: curl-debug' \
  -d '{}' | jq

# 7. Tail SSE (replace <sid>)
curl -N \
  -H 'Accept: text/event-stream' \
  -H 'X-Qwen-Client-Id: curl-debug' \
  -H 'Last-Event-ID: 0' \
  'http://127.0.0.1:4170/session/<sid>/events'

# 8. Demo page
open http://127.0.0.1:4170/demo

When bearer auth is enabled, add -H "Authorization: Bearer $QWEN_SERVER_TOKEN" to every request.

8. Can the demo page be used?

Yes. It is implemented by getDemoHtml(port) in packages/cli/src/serve/demo.ts as self-contained HTML with no external dependency.

Launch mode	Where /demo is registered	Direct browser navigation
Loopback without --require-auth	routes/health-demo.ts, mounted by createServeApp() before bearerAuth	Works without token
Loopback with --require-auth	routes/health-demo.ts, mounted by createServeApp() after bearerAuth	Difficult to use from a plain browser; use curl or SDK
Non-loopback bind	routes/health-demo.ts, mounted by createServeApp() after bearerAuth	Same as above

CSP is default-src 'none'; script-src 'unsafe-inline'; style-src 'unsafe-inline'; connect-src 'self'; frame-ancestors 'none', plus X-Frame-Options: DENY. The page can only fetch 'self' (the daemon) and cannot load external scripts or styles.

9. Call chain from qwen serve to the listening server

qwen serve
   |
   v (process)
packages/cli/index.ts              main()
   |
   v
gemini.tsx                         main() - parseArguments()
   |
   v (yargs assembly)
config/config.ts                   import { serveCommand } ...
config/config.ts                   .command(serveCommand)
config/config.ts                   await yargsInstance.parse()
   |
   v (handler)
commands/serve.ts                  handler(argv) - boot pre-checks
commands/serve.ts                  const { runQwenServe } = await import('../serve/index.js')   # lazy load
commands/serve.ts                  await runQwenServe({...})
   |
   v
serve/run-qwen-serve.ts              runQwenServe(opts, deps)
   |  |- trim token
   |  |- hostname mismatch fallback
   |  |- auth preflight
   |  |- workspace validation + canonicalization
   |  |- MCP budget validation + childEnvOverrides
   |  |- loadSettings + validatePolicyConfig
   |  |- PermissionAuditRing + publisher
   |  |- resolveBridgeFsFactory
   |  `- createHttpAcpBridge({...})
   |
   v
serve/run-qwen-serve.ts              const app = createServeApp(opts, () => actualPort, {...})
   |
   v
serve/server.ts                    createServeApp() - builds Express app (**does not listen**)
   |  |- middleware chain (Host allowlist / CORS / bearerAuth / mutation gate / rate limit)
   |  |- route mounting (health / demo / capabilities / workspace / session / SSE / ACP HTTP)
   |  `- return app
   |
   v
serve/run-qwen-serve.ts              server = app.listen(port, hostname, cb)
   |  |- server.maxConnections = cap
   |  |- actualPort = server.address().port
   |  |- write "qwen serve listening on ..."
   |  |- register SIGINT / SIGTERM (onSignal)
   |  `- resolve(handle: RunHandle)
   |
   v
commands/serve.ts                  await blockForever()    // block forever until signal

Key facts:

• createServeApp only builds; it does not listen. It returns an express() instance with middleware and routes mounted. The caller owns app.listen(). server.test.ts uses the factory this way across roughly 25 cases, so the factory intentionally avoids owning lifecycle.
• () => actualPort is a lazy closure. actualPort is assigned in the app.listen callback. The hostAllowlist middleware reads it on demand, so ephemeral ports (--port 0) still gate the Host header correctly.
• await blockForever() is intentional. If yargs.parse() resolves, the CLI top level falls through into the interactive TUI entrypoint (gemini.tsx). SIGINT / SIGTERM exit through runQwenServe's onSignal path.

10. HTTP route file split

The main assembly happens in createServeApp() in server.ts, which wires middleware and mounts focused route modules:

Routes	File	Mounting entry
/health, /demo	packages/cli/src/serve/routes/health-demo.ts	healthDemoRoutes.register()
/daemon/status	packages/cli/src/serve/routes/daemon-status.ts	registerDaemonStatusRoutes()
/capabilities, workspace init/tool/MCP mutation routes, ACP HTTP bridge	packages/cli/src/serve/server.ts	Registered directly inside createServeApp()
Workspace status, env, preflight, MCP/tool/provider/skill summaries	packages/cli/src/serve/routes/workspace-status.ts	registerWorkspaceStatusRoutes(), registerWorkspaceDiagnosticStatusRoutes()
Workspace extensions and extension operations	packages/cli/src/serve/routes/workspace-extensions.ts	registerWorkspaceExtensionRoutes()
/workspace/memory (GET/POST)	packages/cli/src/serve/workspace-memory.ts	mountWorkspaceMemoryRoutes()
All /workspace/agents CRUD routes	packages/cli/src/serve/workspace-agents.ts	mountWorkspaceAgentsRoutes()
GET /file, /file/bytes, /list, /glob, /stat	packages/cli/src/serve/routes/workspace-file-read.ts	registerWorkspaceFileReadRoutes()
POST /file/write, /file/edit	packages/cli/src/serve/routes/workspace-file-write.ts	registerWorkspaceFileWriteRoutes()
Workspace setup, trust, settings, permissions, and voice routes	packages/cli/src/serve/routes/workspace-*.ts	registerWorkspaceSetupGithubRoutes(), registerWorkspaceTrustRoutes(), etc.
Workspace auth provider and device-flow routes	packages/cli/src/serve/routes/workspace-auth.ts	registerWorkspaceAuthRoutes()
Session lifecycle, prompt, metadata, language, shell, recap, rewind, branch, and list routes	packages/cli/src/serve/routes/session.ts	registerSessionRoutes()
GET /session/:id/events SSE stream	packages/cli/src/serve/routes/sse-events.ts	registerSseEventsRoutes()
Permission response routes	packages/cli/src/serve/routes/permission.ts	registerPermissionRoutes()

For the complete route and wire protocol reference, see ../qwen-serve-protocol.md. For architecture, see 01-architecture.md.

11. Graceful vs hard shutdown

• First SIGINT / SIGTERM -> runQwenServe onSignal -> two-phase graceful shutdown:
  1. bridge.shutdown(): each channel gets KILL_HARD_DEADLINE_MS (10s), then channel.kill().
  2. server.close(): in-flight requests drain, SHUTDOWN_FORCE_CLOSE_MS (5s) triggers closeAllConnections(), then a second 2s deadline applies.
• Second SIGINT / SIGTERM while already exiting -> bridge.killAllSync() synchronously SIGKILLs all ACP children and calls process.exit(1) to avoid orphan processes.

RunHandle.close() returned by runQwenServe is the programmatic equivalent for embedders and tests.

12. Embedded invocation (bypass CLI)

import { runQwenServe } from '@qwen-code/qwen-code/serve';

const handle = await runQwenServe({
  port: 0, // ephemeral
  hostname: '127.0.0.1',
  mode: 'http-bridge',
  maxSessions: 20,
  workspace: '/abs/path/to/repo',
});
console.log(`Daemon at ${handle.url}`);
// ... call handle.bridge directly or access handle.server
await handle.close(); // programmatic shutdown

Or get the Express app directly and listen yourself:

import { createServeApp } from '@qwen-code/qwen-code/serve';

const app = createServeApp(
  {
    port: 0,
    hostname: '127.0.0.1',
    mode: 'http-bridge',
    maxSessions: 20,
  },
  () => 0,
  {
    /* deps: bridge, fsFactory, ... */
  },
);

const server = app.listen(0, '127.0.0.1', () => {
  console.log('listening on', server.address());
});

Note: when calling createServeApp directly, the default fsFactory.trusted = false. Agent-side ACP writeTextFile is rejected as untrusted_workspace, and a stderr warning is printed once. Either inject deps.fsFactory with explicit trust, inject deps.bridge, or accept the trust-gated default behavior.

13. Debugging recipes

See the debugging section in 19-observability.md. The common commands are:

# Is the daemon alive?
curl http://127.0.0.1:4170/health

# Which capabilities are advertised?
curl -s http://127.0.0.1:4170/capabilities | jq

# Daemon-host readiness
curl -s http://127.0.0.1:4170/workspace/preflight | jq

# Tail live SSE
curl -N -H 'Accept: text/event-stream' \
     -H 'Last-Event-ID: 0' \
     'http://127.0.0.1:4170/session/<sid>/events'

# Verbose logs
QWEN_SERVE_DEBUG=1 qwen serve

References

• CLI entry: packages/cli/src/commands/serve.ts
• Bootstrap: packages/cli/src/serve/run-qwen-serve.ts
• Express factory: packages/cli/src/serve/server.ts
• Middleware: packages/cli/src/serve/auth.ts
• Bridge factory: packages/acp-bridge/src/bridge.ts
• Demo page HTML: packages/cli/src/serve/demo.ts
• User docs: ../../users/qwen-serve.md
• Wire protocol: ../qwen-serve-protocol.md