Merge pull request #423 from safing/fix/patch-set-9

Fix DNS request context and improve location proximity alg

firewall/dns.go

@@ -264,8 +264,8 @@ func UpdateIPsAndCNAMEs(q *resolver.Query, rrCache *resolver.RRCache, conn *netw
 		// Create new record for this IP.
 		record := resolver.ResolvedDomain{
 			Domain:            q.FQDN,
-			RRCache:  rrCache,
 			Resolver:          rrCache.Resolver,
+			DNSRequestContext: rrCache.ToDNSRequestContext(),
 			Expires:           rrCache.Expires,
 		}
 

intel/geoip/location.go

@@ -30,57 +30,55 @@ type Coordinates struct {
 	Longitude      float64 `maxminddb:"longitude"`
 }
 
-// About GeoLite2 City accuracy_radius:
-//
-// range: 1-1000
-// seen values (from memory): 1,5,10,20,50,100,200,500,1000
-// default seems to be 100
-//
-// examples:
-// 1.1.1/24 has 1000: Anycast
-// 8.8.0/19 has 1000: Anycast
-// 8.8.52/22 has 1: City of Westfield
-//
-// Conclusion:
-// - Ignore location data completely if accuracy_radius > 500
-
 // EstimateNetworkProximity aims to calculate the distance between two network locations. Returns a proximity value between 0 (far away) and 100 (nearby).
 func (l *Location) EstimateNetworkProximity(to *Location) (proximity int) {
-	// Distance Value:
-	// 0: other side of the Internet
-	// 100: same network/datacenter
+	/*
+		Distance Value
 
-	// Weighting:
-	// continent match: 25
-	// country match: 20
-	// AS owner match: 25
-	// AS network match: 20
-	// coordinate distance: 0-10
+		- 0: Other side of the Internet.
+		- 100: Very near, up to same network / datacenter.
 
-	// continent match: 25
-	if l.Continent.Code == to.Continent.Code {
+		Weighting Goal
+
+		- Exposure to different networks shall be limited as much as possible.
+		- A single network should not see a connection over a large distance.
+		- Latency should be low.
+
+		Weighting Intentions
+
+		- Being on the same continent is better than being in the same AS.
+		- Being in the same country is better than having low coordinate distance.
+		- Coordinate distance is only a tie breaker, as accuracy varies heavily.
+		- Same AS with lower coordinate distance beats being on the same continent.
+
+		Weighting Configuration
+
+		- Continent match: 30
+		- Country match: 25
+		- ASOrg match: 20
+		- ASN match: 15
+		- Coordinate distance: 0-10
+	*/
+
+	if l.Continent.Code != "" &&
+		l.Continent.Code == to.Continent.Code {
+		proximity += 30
+		if l.Country.ISOCode != "" &&
+			l.Country.ISOCode == to.Country.ISOCode {
 			proximity += 25
-		// country match: 20
-		if l.Country.ISOCode == to.Country.ISOCode {
+		}
+	}
+
+	if l.AutonomousSystemOrganization != "" &&
+		l.AutonomousSystemOrganization == to.AutonomousSystemOrganization {
 		proximity += 20
+		if l.AutonomousSystemNumber != 0 &&
+			l.AutonomousSystemNumber == to.AutonomousSystemNumber {
+			proximity += 15
 		}
 	}
 
-	// AS owner match: 25
-	if l.AutonomousSystemOrganization == to.AutonomousSystemOrganization {
-		proximity += 25
-		// AS network match: 20
-		if l.AutonomousSystemNumber == to.AutonomousSystemNumber {
-			proximity += 20
-		}
-	}
-
-	// coordinate distance: 0-10
-	fromCoords := haversine.Coord{Lat: l.Coordinates.Latitude, Lon: l.Coordinates.Longitude}
-	toCoords := haversine.Coord{Lat: to.Coordinates.Latitude, Lon: to.Coordinates.Longitude}
-	_, km := haversine.Distance(fromCoords, toCoords)
-
-	// adjust accuracy value
+	// Check coordinates and adjust accuracy value.
 	accuracy := l.Coordinates.AccuracyRadius
 	switch {
 	case l.Coordinates.Latitude == 0 && l.Coordinates.Longitude == 0:
@@ -93,12 +91,37 @@ func (l *Location) EstimateNetworkProximity(to *Location) (proximity int) {
 		accuracy = to.Coordinates.AccuracyRadius
 	}
 
-	if km <= 10 && accuracy <= 100 {
+	/*
+		About the Accuracy Radius
+
+		- Range: 1-1000
+		- Seen values (estimation): 1,5,10,20,50,100,200,500,1000
+		- The default seems to be 100.
+
+		Cxamples
+
+		- 1.1.1/24 has 1000: Anycast
+		- 8.8.0/19 has 1000: Anycast
+		- 8.8.52/22 has 1: City of Westfield
+
+		Conclusion
+
+		- Ignore or penalize high accuracy radius.
+	*/
+
+	// Calculate coordinate distance in kilometers.
+	fromCoords := haversine.Coord{Lat: l.Coordinates.Latitude, Lon: l.Coordinates.Longitude}
+	toCoords := haversine.Coord{Lat: to.Coordinates.Latitude, Lon: to.Coordinates.Longitude}
+	_, km := haversine.Distance(fromCoords, toCoords)
+
+	if km <= 50 && accuracy <= 100 {
+		// Give a flat out ten for highly accurate coordinates within 50km.
 		proximity += 10
 	} else {
+		// Else, take a percentage.
 		distanceInPercent := (earthCircumferenceInKm - km) * 100 / earthCircumferenceInKm
 
-		// apply penalty for locations with low accuracy (targeting accuracy radius >100)
+		// Apply penalty for locations with low accuracy (targeting accuracy radius >100).
 		accuracyModifier := 1 - float64(accuracy)/2000
 		proximity += int(distanceInPercent * 0.10 * accuracyModifier)
 	}

nameserver/nameserver.go

@@ -141,6 +141,12 @@ func handleRequest(ctx context.Context, w dns.ResponseWriter, request *dns.Msg)
 	// Once we decided on the connection we might need to save it to the database,
 	// so we defer that check for now.
 	defer func() {
+		// Add metadata to connection.
+		if rrCache != nil {
+			conn.DNSContext = rrCache.ToDNSRequestContext()
+			conn.Resolver = rrCache.Resolver
+		}
+
 		switch conn.Verdict {
 		// We immediately save blocked, dropped or failed verdicts so
 		// they pop up in the UI.
@@ -222,27 +228,19 @@ func handleRequest(ctx context.Context, w dns.ResponseWriter, request *dns.Msg)
 		}
 	}
 	// Handle special cases.
-	if rrCache == nil {
+	switch {
+	case rrCache == nil:
 		tracer.Warning("nameserver: received successful, but empty reply from resolver")
 		return reply(nsutil.ServerFailure("internal error: empty reply"))
-	}
-
-	// Add dns context and resolver to connection.
-	conn.DNSContext = rrCache
-	conn.Resolver = rrCache.Resolver
-
+	case rrCache.RCode == dns.RcodeNameError:
 		// Return now if NXDomain.
-	if rrCache.RCode == dns.RcodeNameError {
 		return reply(nsutil.NxDomain("no answer found (NXDomain)"))
 	}
 
+	// Check with firewall again after resolving.
 	tracer.Trace("nameserver: deciding on resolved dns")
 	rrCache = firewall.FilterResolvedDNS(ctx, conn, q, rrCache)
 
-	// Add dns context and resolver to connection.
-	conn.DNSContext = rrCache
-	conn.Resolver = rrCache.Resolver
-
 	// Check again if there is a responder from the firewall.
 	if responder, ok := conn.Reason.Context.(nsutil.Responder); ok {
 		tracer.Infof("nameserver: handing over request for %s to special filter responder: %s", q.ID(), conn.Reason.Msg)

netenv/online-status.go

@@ -42,6 +42,8 @@ var (
 	DNSFallbackTestDomain     = "dns-check.safing.io."
 	DNSFallbackTestExpectedIP = net.IPv4(0, 65, 67, 75) // Ascii: \0ACK
 
+	ConnectedToSPN = abool.New()
+
 	// SpecialCaptivePortalDomain is the domain name used to point to the detected captive portal IP
 	// or the captive portal test IP. The default value should be overridden by the resolver package,
 	// which defines the custom internal domain name to use.
@@ -350,6 +352,12 @@ func checkOnlineStatus(ctx context.Context) {
 		return StatusUnknown
 	}*/
 
+	// 0) check if connected to SPN
+
+	if ConnectedToSPN.IsSet() {
+		updateOnlineStatus(StatusOnline, nil, "connected to SPN")
+	}
+
 	// 1) check for addresses
 
 	ipv4, ipv6, err := GetAssignedAddresses()

network/connection.go

@@ -145,7 +145,7 @@ type Connection struct { //nolint:maligned // TODO: fix alignment
 	ProcessContext ProcessContext
 	// DNSContext holds additional information about the DNS request that was
 	// probably used to resolve the IP of this connection.
-	DNSContext *resolver.RRCache
+	DNSContext *resolver.DNSRequestContext
 	// TunnelContext holds additional information about the tunnel that this
 	// connection is using.
 	TunnelContext interface{}
@@ -333,7 +333,7 @@ func NewConnectionFromFirstPacket(pkt packet.Packet) *Connection {
 
 	var scope string
 	var resolverInfo *resolver.ResolverInfo
-	var dnsContext *resolver.RRCache
+	var dnsContext *resolver.DNSRequestContext
 
 	if inbound {
 
@@ -365,7 +365,7 @@ func NewConnectionFromFirstPacket(pkt packet.Packet) *Connection {
 				scope = lastResolvedDomain.Domain
 				entity.Domain = lastResolvedDomain.Domain
 				entity.CNAME = lastResolvedDomain.CNAMEs
-				dnsContext = lastResolvedDomain.RRCache
+				dnsContext = lastResolvedDomain.DNSRequestContext
 				resolverInfo = lastResolvedDomain.Resolver
 				removeOpenDNSRequest(proc.Pid, lastResolvedDomain.Domain)
 			}

resolver/ipinfo.go

@@ -44,8 +44,8 @@ type ResolvedDomain struct {
 	// information.
 	Resolver *ResolverInfo
 
-	// RRCache holds the DNS response that was received for this domain.
-	RRCache *RRCache
+	// DNSRequestContext holds the DNS request context.
+	DNSRequestContext *DNSRequestContext
 
 	// Expires holds the timestamp when this entry expires.
 	// This does not mean that the entry may not be used anymore afterwards,

resolver/rr_context.go

@@ -0,0 +1,39 @@
+package resolver
+
+import (
+	"time"
+
+	"github.com/miekg/dns"
+)
+
+// DNSRequestContext is a static structure to add information to DNS request connections.
+type DNSRequestContext struct {
+	Domain   string
+	Question string
+	RCode    string
+
+	ServedFromCache bool
+	RequestingNew   bool
+	IsBackup        bool
+	Filtered        bool
+
+	Modified time.Time
+	Expires  time.Time
+}
+
+// ToDNSRequestContext returns a new DNSRequestContext of the RRCache.
+func (rrCache *RRCache) ToDNSRequestContext() *DNSRequestContext {
+	return &DNSRequestContext{
+		Domain:   rrCache.Domain,
+		Question: rrCache.Question.String(),
+		RCode:    dns.RcodeToString[rrCache.RCode],
+
+		ServedFromCache: rrCache.ServedFromCache,
+		RequestingNew:   rrCache.RequestingNew,
+		IsBackup:        rrCache.IsBackup,
+		Filtered:        rrCache.Filtered,
+
+		Modified: time.Unix(rrCache.Modified, 0),
+		Expires:  time.Unix(rrCache.Expires, 0),
+	}
+}

resolver/rrcache.go

@@ -2,7 +2,6 @@ package resolver
 
 import (
 	"context"
-	"encoding/json"
 	"fmt"
 	"net"
 	"time"
@@ -45,25 +44,6 @@ type RRCache struct {
 	Modified int64
 }
 
-func (rrCache *RRCache) MarshalJSON() ([]byte, error) {
-	var record = struct {
-		RRCache
-
-		Question string
-		RCode    string
-		Modified time.Time
-		Expires  time.Time
-	}{
-		RRCache:  *rrCache,
-		Question: rrCache.Question.String(),
-		RCode:    dns.RcodeToString[rrCache.RCode],
-		Modified: time.Unix(rrCache.Modified, 0),
-		Expires:  time.Unix(rrCache.Expires, 0),
-	}
-
-	return json.Marshal(record)
-}
-
 // ID returns the ID of the RRCache consisting of the domain and question type.
 func (rrCache *RRCache) ID() string {
 	return rrCache.Domain + rrCache.Question.String()