items and am now just generating one: Locator item, usually from Slot/DIMM locator info,
but sometimes from Bank Locator info when it is more reliable based on my data samples.
Updated help menu, updated man page, now shows working -x -xx -xxx extra data. This may
change slightly over time.
Also removed speed output when No Module Installed is returned for device size. This
also wills switch off width if both total/data are empty.
This is much closer now to live 2.2.0, but I'll leave a few more tests before putting
it at 2.2.0.
working, but help/man does not have that yet, until I finalize the order.
Fixed dmidecode issues, showing extra data types for -m, added line length handling
so -m is properly integrated with rest of inxi re max line lengths.
support. This feature requires dmidecode, and usually that needs to be run as root.
Significantly improved dmidecode error handling and output, and have as 2.1.90 testing/initial
release basic ram data.
In subsequent releases, extra info for -x and -xx and -xxx will be added as well to the output.
For those who want to jump on board early for ram data, update your repos, for those who want to
wait for the full featured version, with -x type data, wait for 2.2.0
And that's that.
have the odd feature in our test data of having > 1 IF id, like ib0 ib1 per pcibusid.
Added support for virtual nics as well. This required refactoring the networking functions
significantly, so hopefully nothing breaks for existing systems. It should in theory be more
robust now than it was before, with more accurate output, particularly with multiple port
devices, like two port nics etc.
that this method will be super long lived, I expect LXDE to change how it shows itself
to the system when the gtk variant goes away. Good for lxde by the way in dumping gtk.
added in an abstracted kernel_compiler method, not just gcc, that may work on freebsd,
and in the future, it may also work if distros or kernel people start using either
clang or LLVM-GCC or LLVM for compiling linux kernels. I'd need some data sets to
show that however before adding that full linux kernel support, but the framework
is now there.
That continues the abstraction of certain features, like kernel compiler, init system,
display server. Display server still needs full data sets from mir/wayland, at least
wayland, and the bsd display servers as well, I have no idea how to get that data
at this point, but the starting framework is present anyway for that time I get
those datasets.
Almost all these changes are for darwin osx, and that is about all I will do for that
junky broken platform, they have no tools, they have no discipline when it comes to
following unix like conventions, they even use spaces in program names, like windows.
Given it has no native lspci or pciconf tool that I am aware of, or dmesg.boot,
there's little point in putting more time into it. dmidecode does not run on darwin,
so there's nothing to learn there either, you can get a silly 3rd party program to
generate a dmidecode.bin data file that dmidecode can then read, but since that
requires not one, but two third party programs be installed, that's not going to
happen.
Next time an osx user calls this system 'unix' I will laugh.
experiment, just to get it running, so you can all ignore this release.
Added in darwin cpu, init, distro version support, and updated inxi to support
darwin/osx without exiting.
No linux changes.
used percentage, there are too many possible remote file systems to safely exclude, so
sticking with using the test that partition is /dev mounted.
Howeve, did add excludes of nfs/smbfs types, as well as future bsd excludes of those.
particularly with fringe or broken sensors outputs. See inxi issue 58 for details.
http://code.google.com/p/inxi/issues/detail?id=58
Added temp3, and an override to capture cases where temp3 is the actual cpu temp.
Added PECI overrides for cases like msi/asus mobos have defective CPUTIN return data.
Added core0 overrides as well, for cases where the temp returned is too low.
It is absolutely 100% guaranteed that these changes will break some outputs that were
working, but it's also certain that I believe that more wrong outputs will be corrected.
With sensors, really the only way you can get reliable sensors is to use the lm-sensors
config files for your motherboard, then set: CPU: temp and MB: temp explicitly.
inxi will always use CPU: or MB: to override anything found.
It turns out I'd neglected to include /dev/disk partitions, oops, in the df data.
Since this is a long time bug, it warrants a new release even though I just did
2.1.22.
disk used percentage as well. Since swap space is not available as disk space, it
makes sense to me to count it as used. -P/-p show the percent of swap used as well.
to identify a partition, but rather the basic /dev/sdc for example.
This made -D show wrong disk used percentage.
Also, I added --total for df that have that supported, there is however an oddity which you
can see here:
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} !/total/ {total = total + $4 }END {print total}'
result:
614562236
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} /^total/ {total = total + $4 }END {print total}'
result:
614562228
df -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} {total = total + $4 }END {print total}'
result:
614562236
In my tests, using --total gives a greater disk user percentage than adding the results
up manually, as inxi did before, and still does for systems without --total for df.
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs \
--exclude-type=procfs --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs \
--exclude-type=unionfs
Filesystem Type 1024-blocks Used Available Capacity Mounted on
/dev/disk/by-label/root-data ext3 12479556 12015624 335816 98% /
/dev/sdc9 ext3 20410156 18013360 1979432 91% /home
/dev/sdc7 ext3 4904448 3785460 1016672 79% /media/sdb2
/dev/sdc5 ext3 30382896 27467220 2295720 93% /var/www/m
/dev/sdc8 ext3 61294356 41849300 18196972 70% /home/me/1
/dev/sdb1 ext3 307532728 285159432 20810456 94% /home/me/2
/dev/sdd1 ext3 26789720 18153076 7542620 71% /home/me/3
/dev/sdd2 ext3 213310776 206932912 2040960 100% /home/me/4
/dev/sda7 ext3 10138204 1185772 8434348 13% /home/me/5
total - 687242840 614562156 62652996 91% -
Strange, no? the data is in blocks, and it should of course in theory add up to exactly the
same thing. However, because --total lets df do the math, I'm going to use that for now,
unless someone can show it's not good.
inxi still falls back for bsds and older df to the standard method.
of disk drive lists. Was showing USB ID-1: /dev/sde now shows: ID-1: USB /dev/sde
that is more intuitive and keeps the columns in alignment more or less, easier
to read.
Second, fixes a bug with some file systems / usb drives
where they do not use usb- in the /dev/disk/by-id line but only wwn-
https://access.redhat.com/site/documentation/en
-US/Red_Hat_Enterprise_Linux/5/html/Online_Storage_Reconfiguration_Guide/persistent_naming.html
explains it somewhat.
the fix is adding a second if null test of the device /dev/sdx in by-path, that seems
to fix the issue. by-path does have the usb- item, though it does not have the name
so it's not as reliable in absolute terms, but it's fine as a second step fallback
option.
