A small point release, various smaller items, ongoing updates to matching table

features, bug fixes, but nothing major. -------------------------------------------------------------------------------- SPECIAL THANKS: 1. Thanks Umio-Yasuno in github issue #281 for actually being proactive and finding some Intel/AMD gpu device id lists. I wish more issues would be like that. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. DEBUG: --debug-arg and --debug-arg-use must use the full format: --debug-arg="-GS", or else the command line eats the args, even if in quotes. The error handlers will then complain about no data supplied, and it will exit. -------------------------------------------------------------------------------- BUGS: 1. GRAPHICS: An accidental 'and' instead of 'or' test (see Code 1) led to systems without gpu or dri graphics drivers not showing their xorg driver even when present. This was due to a mistake, and also due to how Perl handles || and && in sequence, which made this bug not show up until I tested on a system with xorg graphics driver, but without dri or gpu drivers. Virtually no modern hardware or operating systems would trip this condition, but older hardware and operating systems, which may not have gpu or dri drivers, might. And did, in my case. This is by the way why I try to test on old hardware at least now and then. -------------------------------------------------------------------------------- FIXES: 1. CODE: A poorly done attempt at optimization would have broken case insensitive pre-compiled regex with $pattern = qr/../ because you can't add /$pattern/i to precompiled pattern, but qr/.../i support only added perl 5.014. This should impact almost nobody, but it is/was a glitch. Basically qr/../ can only be used when no /i type modifier is required if supporting Perl less than 5.014. See inxi-perl/docs/optimization.txt section REGEX for more on this. Note that Perl already compares the values in the variable each iteration via a simple equality test, so the only real gain from using qr// is not having to do that equality test each iteration of a loop. 2. OUTPUT: Fixed a few small inner key name failures to use '-' instead of ' ' to separate key terms: 3. REPOS: Called urpm urpmq, which is the query tool, not the actual type. 4. GRAPHICS: Fixed some gpu_id.pl matching rules. Thanks Umio-Yasuno in github issue #281 for noticing that some of the matching rules were either wrong or not loose enough. -------------------------------------------------------------------------------- ENHANCEMENTS: 1a. OPTIONS: Long time oversight, no option to test or do one time change of key: value separator string ':'. This goes along with existing config option SEP2_CONSOLE. Added --separator/--sep {character}. 1b. OPTIONS: Added synonym for --output: --export, and for --output-file: --export-file. 2a. GRAPHICS: New Intel gpu data source, from intel, finally. This let us add a lot more gpu ids. Thanks Umio-Yasuno in github issue #281 for finding these. 2b. GRAPHICS: New AMD data source, from github. This let me fill in some more, albeit not as accurately as previous sources, but added more so fine. Thanks Umio-Yasuno in github issue #281 for finding these. 3. CONFIG: In a first, took a feature from acxi, --config, and imported it into inxi! This shows active current configuration, by file. 4. CPU: updated, fine tuned amd cpu microarch ids. 5. DISKS: More disk vendors added. Not as many as usual, I think the high tech sanctions against China may be slowing the rate of new Chinese SSD/USB vendors. But still some new ones, as always. Not many new IDs for existing ones though, that is noteworthy. A few new data sources to help pinpoint vendor names found too, though those won't in general impact users, but can be used to determine if a string is in fact a company name. -------------------------------------------------------------------------------- CHANGES: 1. OUTPUT: Fix 2, -t 'started by:' key name changed to: started-by: -G 'direct render:' changed to 'direct-render:'. -------------------------------------------------------------------------------- DOCUMENTATION: 1a. MAN: there were a few <...> instead of [...] for required option arguments. Fixed those. 1b. MAN: also added --debug-id [string] since that is in general useful info. 1c. MAN: Added qualifiers about when xwayland: and compositor: items appear for default -Ga output. 1d. MAN: Typo in config path in man page, .conf/ should be .config/. 1e. MAN: for --output json/xml, added pointer to doc page on smxi.org, people being unable to grasp the output is getting tiresome. 1f. MAN: Added synonym for --output, --export. 2a. SMXI.ORG DOCS: added --output json/xml documentation page: https://smxi.org/docs/inxi-json-xml-output.htm - this is also linked to from the github wiki page, though of course nobody is going to read it, as well as from a few pages in smxi.org. 2b. Updated inxi-man,options,changelog.htm files. 3. CHANGELOG: Changed to use same format as acxi.changelog, leading topic id's in upper case, makes it easier to scan read and organize. 4a. DOCS: docs/inxi-cpu.txt - cleaned up, re-arranged a bit, added cpuid data explanation, and updated header on inxi-perl/data/cpu/microarch to better explain the way amd does ext fam / ext model, which are not the same, bizarrrely, very confusing. 4b. DOCS: New: docs/inxi-disks.txt. Split out from inxi-resources.txt, part of the ongoing to documentation modularization, slowly splitting out sub topics from inxi-data.txt and inxi-resources.txt. Note this is in general only done when I'm working on that specific feature. But slowly, surely. -------------------------------------------------------------------------------- CODE: 1. GRAPHICS: Test when no gpu drivers and no dri drivers but x drivers never showed x driver. Was supposed to be all || for tests: if (@$gpu_drivers || $graphics{'dri-drivers'} && @$x_drivers){ https://perldoc.perl.org/perlop. I believe this led to test 1 being false, test 2 being false, and since that left tests 2 and 3 needing to be true for the && logical and to be true. Since only one of the two was true, the last bit was seen as false. 2. GRAPHICS: Connected with 1, noticed that for some weird reason, I'd decided to assign the array ref for drivers like this: @$x_drivers = (a, b, c); when it was supposed to be: $x_drivers = [a,b,c]; This did not cause any issues, since they mean the same thing, but it was silly to write it that way. 3a. DEBUG: Added --debug-arg-use which allows testers to run a specific argument combination that may be causing issues. 3b. DEBUG: Also added more validation, to make sure arg for --debug-arg / --debug-arg-use start with - or -- followed by a letter. 4. START: Removed this code block from set_konvi_data. I had left this in place for a release or two to make sure no need for it was found, but it will never be used since it never worked in the first place. # my $config_cmd = ''; # there's no current kde 5 konvi config tool that we're aware of. Correct if changes. # This part may never have worked, but I don't have legacy data to determine. # The idea was to get inxi.conf files from konvi data stores, but that was never right. # if (main::check_program('kde4-config')){ # $config_cmd = 'kde4-config --path data'; # } # kde5-coinfig never existed, was replaced by $XDG_DATA_HOME in KDE # elsif (main::check_program('kde-config')){ # $config_cmd = 'kde-config --path data'; # } # elsif (main::check_program('qtpaths')){ # $config_cmd = 'qtpaths --paths GenericDataLocation'; # } # The section below is on request of Argonel from the Konversation developer team: # it sources config files like $HOME/.kde/share/apps/konversation/scripts/inxi.conf # if ($config_cmd){ # my @data = main::grabber("$config_cmd 2>/dev/null",':'); # Configs::set(\@data) if @data; # main::log_data('dump',"kde config \@data",\@data) if $b_log; # } 5. OPTIONS: in OptionsHandler::post_process(), reorganized the various run and exit triggers, help, configs, recommends, version, etc. All on top now.
2024-11-16 16:21:39 +00:00 · 2023-02-07 17:59:56 -08:00 · 2023-02-07 17:59:56 -08:00 · 464cac2f1e
parent eacf7f4819
commit 464cac2f1e
3 changed files with 462 additions and 162 deletions
--- a/345
+++ b/345
@ -1,6 +1,6 @@
 #!/usr/bin/env perl
 ## infobash: Copyright (C) 2005-2007  Michiel de Boer aka locsmif
-## inxi: Copyright (C) 2008-2022 Harald Hope
+## inxi: Copyright (C) 2008-2023 Harald Hope
 ## Additional features (C) Scott Rogers - kde, cpu info
 ## Parse::EDID (C):  2005-2010 by Mandriva SA, Pascal Rigaux, Anssi Hannula
 ## Further fixes (listed as known): Horst Tritremmel <hjt at sidux.com>
@ -48,8 +48,8 @@ use POSIX qw(ceil uname strftime ttyname);

 ## INXI INFO ##
 my $self_name='inxi';
-my $self_version='3.3.24';
-my $self_date='2022-12-27';
+my $self_version='3.3.25';
+my $self_date='2023-02-07';
 my $self_patch='00';
 ## END INXI INFO ##

@ -1166,22 +1166,21 @@ sub print_irc_message {
 {
 package Configs;
 sub set {
-	my ($configs) = @_;
-	my ($key, $val,@config_files);
-	if (!$configs){
-		@config_files = (
-		qq(/etc/$self_name.conf), 
-		qq(/etc/$self_name.d/$self_name.conf), 
-		qq($user_config_dir/$self_name.conf)
-		);
-	}
-	else {
-		@config_files = @$configs;
-	}
+	my ($b_show) = @_;
+	my ($b_files,$key, $val,@config_files);
+	# removed legacy kde @$configs test which never worked
+	@config_files = (
+	qq(/etc/$self_name.conf), 
+	qq(/etc/$self_name.d/$self_name.conf), 
+	qq($user_config_dir/$self_name.conf)
+	);
 	# Config files should be passed in an array as a param to this function.
 	# Default intended use: global @CONFIGS;
 	foreach (@config_files){
 		next unless open(my $fh, '<', "$_");
+		my $b_configs;
+		$b_files = 1;
+		print "${line1}Configuration file: $_\n" if $b_show;
 		while (<$fh>){
 			chomp;
 			s/#.*//;
@ -1193,11 +1192,34 @@ sub set {
 			next unless length;
 			($key, $val) = split(/\s*=\s*/, $_, 2);
 			next unless length($val);
-			process_item($key,$val);
+			if (!$b_show){
+				process_item($key,$val);
+			}
+			else {
+				print $line3 if !$b_configs;
+				print "$key=$val\n";
+				$b_configs = 1;
+			}
 			# print "f: $file key: $key val: $val\n";
 		}
 		close $fh;
+		if ($b_show && !$b_configs){
+			print "No configuration items found in file.\n";
+		}
 	}
+	return $b_files if $b_show;
+}
+sub show {
+	print "Showing current active/set configurations, by file. Last overrides previous.\n";
+	my $b_files = set(1);
+	print $line1;
+	if ($b_files){
+		print "All done! Everything look good? If not, fix it.\n";
+	}
+	else {
+		print "No configuration files found. Is that what you expected?\n";
+	}
+	exit 0;
 }
 # note: someone managed to make a config file with corrupted values, so check
 # int explicitly, don't assume it was done correctly.
@ -2192,14 +2214,18 @@ sub system_files {
 sub run_self {
 	print "Creating $self_name output file now. This can take a few seconds...\n";
 	print "Starting $self_name from: $self_path\n";
+	my $args = '-FERfJLrploudma --slots --pkg --edid';
 	my $a = ($debugger{'arg'}) ? ' ' . $debugger{'arg'} : '';
 	my $i = ($option eq 'main-full')? ' -i' : '';
 	my $z = ($debugger{'filter'}) ? ' -z' : '';
 	my $w = ($debugger{'width'}) ? $debugger{'width'} : 120;
-	my $aiz = "$i$z";
-	$aiz =~ s/[\s-]//g;
-	my $self_file = "$data_dir/$self_name-FERfJLrploudma$aiz-slots-pkg-edid-gpu-y$w.txt";
-	my $cmd = "$self_path/$self_name -FERfJLrploudma$i$z$a --slots --pkg --edid --gpu --debug 10 -y $w > $self_file 2>&1";
+	$args = $debugger{'arg-use'} if $debugger{'arg-use'};
+	$args = "$args$a$i$z --debug 10 -y $w";
+	my $arg_string = $args;
+	$arg_string =~ s/\s//g; 
+	my $self_file = "$data_dir/$self_name$arg_string.txt";
+	my $cmd = "$self_path/$self_name $args > $self_file 2>&1";
+	# print "Args: $args\nArg String: $arg_string\n";exit;
 	system($cmd);
 	copy($log_file, "$data_dir") or main::error_handler('copy-failed', "$log_file", "$!");
 	system("$self_path/$self_name --recommends -y 120 > $data_dir/$self_name-recommends-120.txt 2>&1");
@ -3931,6 +3957,7 @@ sub set_program_values {
 	'comfc' => ['^comfc',0,'0','comfc',0,1,0,'',''], # unverified
 	'compiz' => ['^compiz',2,'--version','Compiz',0,1,0,'',''],
 	'compton' => ['^\d',1,'--version','Compton',0,1,0,'',''],
+	'cosmic-comp' => ['^cosmic-comp',0,'0','cosmic-comp',0,1,0,'',''], # unverified
 	'ctwm' => ['^\S',1,'-version','ctwm',0,1,0,'',''],
 	'cwm' => ['^cwm',0,'0','CWM',0,1,0,'',''], # no version
 	'dcompmgr' => ['^dcompmgr',0,'0','dcompmgr',0,1,0,'',''], # unverified
@ -4691,6 +4718,8 @@ sub get {
 	'C|cpu' => sub {
 		$show{'short'} = 0;
 		$show{'cpu'} = 1;},
+	'config|configs|configuration|configurations' => sub {
+		$show{'configs'} = 1;},
 	'd|disk-full|optical' => sub {
 		$show{'short'} = 0;
 		$show{'disk'} = 1;
@ -4820,6 +4849,17 @@ sub get {
 	's|sensors|sensor' => sub {
 		$show{'short'} = 0;
 		$show{'sensor'} = 1;},
+	'separator|sep:s' => sub {
+		my ($opt,$arg) = @_;
+		if ($arg){
+			$sep{'s1-console'} = $arg;
+			$sep{'s2-console'} = $arg;
+			$sep{'s1-irc'} = $arg;
+			$sep{'s2-irc'} = $arg;
+		}
+		else {
+			main::error_handler('bad-arg',$opt,$arg);
+		}},
 	'sleep:s' => sub {
 		my ($opt,$arg) = @_;
 		$arg ||= 0;
@ -5116,12 +5156,21 @@ sub get {
 		}},
 	'debug-arg:s' => sub { 
 		my ($opt,$arg) = @_;
-		if ($arg){
+		if ($arg && $arg =~ /^--?[a-z]/ig){
 			$debugger{'arg'} = $arg;
 		}
 		else {
 			main::error_handler('bad-arg', $opt, $arg);
 		}},
+	'debug-arg-use:s' => sub { 
+		my ($opt,$arg) = @_;
+		print "$arg\n";
+		if ($arg && $arg =~ /^--?[a-z]/ig){
+			$debugger{'arg-use'} = $arg;
+		}
+		else {
+			main::error_handler('bad-arg', $opt, $arg);
+		}},
 	'debug-filter|debug-z' => sub {
 		$debugger{'filter'} = 1 },
 	'debug-id:s' => sub { 
@ -5318,7 +5367,7 @@ sub get {
 		$use{'no-ssl'} = 1;},
 	'no-sudo' => sub {
 		$force{'no-sudo'} = 1;},
-	'output:s' => sub {
+	'output|export:s' => sub {
 		my ($opt,$arg) = @_;
 		if ($arg =~ /^(json|screen|xml)$/){
 			$output_type = $arg;
@ -5326,7 +5375,7 @@ sub get {
 		else {
 			main::error_handler('bad-arg', $opt, $arg);
 		}},
-	'output-file:s' => sub {
+	'output-file|export-file:s' => sub {
 		my ($opt,$arg) = @_;
 		if ($arg){
 			if ($arg eq 'print' || main::check_output_path($arg)){
@ -5411,18 +5460,18 @@ sub get {
 	eval $end if $b_log;
 }
 sub post_process {
+	# first run all the stuff that exits after running
 	CheckRecommends::run() if $show{'recommends'};
+	Configs::show() if $show{'configs'};
+	main::show_options() if $show{'help'};
+	main::show_version() if ($show{'version'} || $show{'version-short'});
 	# sets for either config or arg here
 	if ($use{'downloader'} || $wan_url || ($force{'no-dig'} && $show{'ip'})){
 		main::set_downloader();
 	}
-	main::set_xorg_log() if $show{'graphic'};
-	if ($show{'version'} || $show{'version-short'}){
-		main::show_version();
-	}
-	main::show_options() if $show{'help'};
 	$use{'man'} = 0 if (!$use{'yes-man'} || $use{'no-man'});
 	main::update_me($self_download, $download_id) if $use{'update-trigger'};
+	main::set_xorg_log() if $show{'graphic'};
 	if ($b_pledge){
 		my $b_update;
 		# if -c 9x, remove in SelectColors::set_selection(), else remove here
@ -5781,6 +5830,8 @@ sub show_options {
 	--output."],
 	['1', '', '--partition-sort', "[dev-base|fs|id|label|percent-used|size|uuid|used] 
 	Change sort order of ${partition_string} output. See man page for specifics."],
+	['1', '', '--separator, --sep', "[key:value separator character]. Change 
+	separator character(s) for key: value pairs."],
 	['1', '-y', '--width', "[empty|-1|1|60-xxx] Output line width max. Overrides 
 	IRC/Terminal settings or actual widths. If no integer give, defaults to 80. 
 	-1 removes line lengths. 1 switches output to 1 key/value pair per line. 
@ -5972,6 +6023,8 @@ sub show_options {
 	push(@$rows, 
 	[0, '', '', "$line"],
 	[0, '', '', "Additional Options:"],
+	['1', '--config', '--configuration', "Show active configurations, by file(s). 
+	Last item listed overrides previous."],
 	['1', '-h', '--help', "This help menu."],
 	['1', '', '--recommends', "Checks $self_name application dependencies + 
 	recommends, and directories, then shows what package(s) you need to install 
@ -6510,27 +6563,6 @@ sub set_konvi_data {
 	}
 	# for some reason this logic hiccups on multiple spaces between args
 	@ARGV = grep { $_ ne '' } @ARGV;
-	# my $config_cmd = '';
-	# there's no current kde 5 konvi config tool that we're aware of. Correct if changes.
-	# This part may never have worked, but I don't have legacy data to determine.
-	# The idea was to get inxi.conf files from konvi data stores, but that was never right.
-	# if (main::check_program('kde4-config')){
-	#	$config_cmd = 'kde4-config --path data';
-	# }
-	# kde5-coinfig never existed, was replaced by $XDG_DATA_HOME in KDE
-	# elsif (main::check_program('kde-config')){
-	# 	$config_cmd = 'kde-config --path data';
-	# }
-	# elsif (main::check_program('qtpaths')){
-	# 	$config_cmd = 'qtpaths --paths GenericDataLocation';
-	# }
-	# The section below is on request of Argonel from the Konversation developer team:
-	# it sources config files like $HOME/.kde/share/apps/konversation/scripts/inxi.conf
-	#  if ($config_cmd){
-	#	  my @data = main::grabber("$config_cmd 2>/dev/null",':');
-	# 	Configs::set(\@data) if @data;
-	#	 main::log_data('dump',"kde config \@data",\@data) if $b_log;
-	# }
 	eval $end if $b_log;
 }
 }
@ -10823,7 +10855,6 @@ sub cp_caches_fallback {
 	}
 	eval $end if $b_log;
 }
-
 ## START CPU ARCH ##
 sub cp_cpu_arch {
 	eval $start if $b_log;
@ -10946,7 +10977,7 @@ sub cp_cpu_arch {
 				$year = '2004-2008';}
 		}
 		# K9 was planned but skipped
-		elsif ($family eq '10'){
+		elsif ($family eq '10'){ # 1F
 			## verified
 			if ($model =~ /^(2)$/){
 				$arch = 'K10'; # 2:2:budapest;2:1,3:barcelona
@ -10965,7 +10996,7 @@ sub cp_cpu_arch {
 		}
 		# very loose, all stepping 1: covers athlon x2, sempron, turion x2
 		# years unclear, could be 2005 start, or 2008
-		elsif ($family eq '11'){
+		elsif ($family eq '11'){ # 2F
 			if ($model =~ /^(3)$/){
 				$arch = 'K11 Turion X2'; # mix of K8/K10
 				$note = $check;
@ -10973,7 +11004,7 @@ sub cp_cpu_arch {
 				$year = ''; } 
 		}
 		# might also need cache handling like 14/16
-		elsif ($family eq '12'){
+		elsif ($family eq '12'){ # 3F
 			if ($model =~ /^(1)$/){
 				$arch = 'K12 Fusion'; # K10 based apu, llano
 				$process = 'GF 32nm';
@ -10984,7 +11015,7 @@ sub cp_cpu_arch {
 				$year = '2011';} # check years
 		}
 		# SOC, apu
-		elsif ($family eq '14'){
+		elsif ($family eq '14'){ # 5F
 			if ($model =~ /^(1|2)$/){
 				$arch = 'Bobcat';
 				$process = 'GF 40nm';
@ -10994,7 +11025,7 @@ sub cp_cpu_arch {
 				$process = 'GF 40nm';
 				$year = '2011-13';}
 		}
-		elsif ($family eq '15'){
+		elsif ($family eq '15'){ # 6F
 			# note: only model 1 confirmd
 			if ($model =~ /^(0|1|3|4|5|6|7|8|9|A|B|C|D|E|F)$/){
 				$arch = 'Bulldozer';
@ -11021,7 +11052,7 @@ sub cp_cpu_arch {
 				$year = '2011-12';}
 		}
 		# SOC, apu
-		elsif ($family eq '16'){
+		elsif ($family eq '16'){ # 7F
 			if ($model =~ /^(0|1|2|3|4|5|6|7|8|9|A|B|C|D|E|F)$/){
 				$arch = 'Jaguar';
 				$process = 'GF 28nm';
@ -11035,7 +11066,7 @@ sub cp_cpu_arch {
 				$process = 'GF 28nm';
 				$year = '2013-14';}
 		}
-		elsif ($family eq '17'){
+		elsif ($family eq '17'){ # 8F
 			# can't find stepping/model for no ht 2x2 core/die models, only first ones
 			if ($model =~ /^(1|11|20)$/){
 				$arch = 'Zen';
@ -11057,7 +11088,7 @@ sub cp_cpu_arch {
 				$process = 'GF 12nm';
 				$year = '2018-21';}
 			# used this but it didn't age well:  ^(2[0123456789ABCDEF]|
-			elsif ($model =~ /^(31|47|60|68|71|90|98|A.)$/){
+			elsif ($model =~ /^(3.|4.|5.|6.|7.|8.|9.|A.)$/){
 				$arch = 'Zen 2';
 				$gen = '3';
 				$process = 'TSMC n7 (7nm)'; # some consumer maybe GF 14nm
@ -11069,13 +11100,13 @@ sub cp_cpu_arch {
 				$year = '';}
 		}
 		# Joint venture between AMD and Chinese companies. Type amd? or hygon?
-		elsif ($family eq '18'){
+		elsif ($family eq '18'){ # 9F
 			# model 0, zen 1 
 			$arch = 'Zen (Hygon Dhyana)';
 			$gen = '1';
 			$process = 'GF 14nm';
 			$year = '';}
-		elsif ($family eq '19'){
+		elsif ($family eq '19'){ # AF
 			# ext model 6,7, but no base models yet
 			# 10 engineering sample
 			if ($model =~ /^(1.|6.|7.|A.)$/){
@ -11083,8 +11114,8 @@ sub cp_cpu_arch {
 				$gen = '5';
 				$process = 'TSMC n5 (5nm)'; # Epyc Bergamo 4nm, no model IDs yet
 				$year = '2022';}
-			# double check 40, 44
-			elsif ($model =~ /^(4.)$/){
+			# double check 40, 44; 21 confirmed
+			elsif ($model =~ /^(21|4.)$/){
 				$arch = 'Zen 3+';
 				$gen = '4';
 				$process = 'TSMC n6 (7nm)';
@ -13505,6 +13536,7 @@ sub set_disk_vendors {
 	['^Alfawise','^Alfawise','Alfawise',''],
 	['^Android','^Android','Android',''],
 	['^ANACOMDA','^ANACOMDA','ANACOMDA',''],
+	['^Ant[\s_-]?Esports','^Ant[\s_-]?Esports','Ant Esports',''],
 	['^Anucell','^Anucell','Anucell',''],
 	['^Apotop','^Apotop','Apotop',''],
 	# must come before AP|Apacer
@ -13543,6 +13575,7 @@ sub set_disk_vendors {
 	['^(CFD|CSSD)','^CFD','CFD',''],
 	['^CHIPAL','^CHIPAL','CHIPAL',''],
 	['^(Chipsbank|CHIPSBNK)','^Chipsbank','Chipsbank',''],
+	['^(Chipfancie)','^Chipfancier','Chipfancier',''],
 	['^Clover','^Clover','Clover',''],
 	['^CODi','^CODi','CODi',''],
 	['^Colorful\b','^Colorful','Colorful',''],
@ -13568,6 +13601,7 @@ sub set_disk_vendors {
 	['^DIGITAL\s?FILM','DIGITAL\s?FILM','Digital Film',''],
 	['^(Digma|Run(\sY2)?\b)','^Digma','Digma',''],
 	['^Dikom','^Dikom','Dikom',''],
+	['^DINGGE','^DINGGE','DINGGE',''],
 	['^Disain','^Disain','Disain',''],
 	['^(Disney|PIX[\s]?JR)','^Disney','Disney',''],
 	['^(Doggo|DQ-|Sendisk|Shenchu)','^(doggo|Sendisk(.?Shenchu)?|Shenchu(.?Sendisk)?)','Doggo (SENDISK/Shenchu)',''],
@ -13590,6 +13624,7 @@ sub set_disk_vendors {
 	['^eNova','^eNOVA','eNOVA',''],
 	['^Epson','^Epson','Epson',''],
 	['^(Etelcom|SSD051)','^Etelcom','Etelcom',''],
+	['^(Shenzhen\s)?Etopso(\sTechnology)?','^(Shenzhen\s)?Etopso(\sTechnology)?','Etopso',''],
 	['^EURS','^EURS','EURS',''],
 	['^eVAULT','^eVAULT','eVAULT',''],
 	# NOTE: ESA3... may be IBM PCIe SAD card/drives
@ -13616,7 +13651,7 @@ sub set_disk_vendors {
 	['^(Garmin|Fenix|Nuvi|Zumo)','^Garmin','Garmin',''],
 	['^Geil','^Geil','Geil',''],
 	['^GelL','^GelL','GelL',''], # typo for Geil? GelL ZENITH R3 120GB
-	['^(Generic|G1J3|SCA128|SLD|UY[67])','^Generic','Generic',''],
+	['^(Generic|G1J3|M0S00|SCA128|SLD|UY[67])','^Generic','Generic',''],
 	['^(Genesis(\s?Logic)?|05e3)','(Genesis(\s?Logic)?|05e3)','Genesis Logic',''],
 	['^Geonix','^Geonix','Geonix',''],
 	['^Getrich','^Getrich','Getrich',''],
@ -13627,6 +13662,7 @@ sub set_disk_vendors {
 	['^GLOWY','^GLOWY','Glowy',''],
 	['^Goldendisk','^Goldendisk','Goldendisk',''],
 	['^Goldenfir','^Goldenfir','Goldenfir',''],
+	['^(Goldkey|GKH\d)','^Goldkey','Goldkey',''],
 	['^Golden[\s_-]?Memory','^Golden[\s_-]?Memory','Golden Memory',''],
 	['^(Goldkey|GKP)','^Goldkey','GoldKey',''],
 	# Wilk Elektronik SA, poland
@ -13635,6 +13671,7 @@ sub set_disk_vendors {
 	# supertalent also has FM: |FM
 	['^(G[\.]?SKILL)','^G[\.]?SKILL','G.SKILL',''],
 	['^G[\s-]*Tech','^G[\s-]*Tech(nology)?','G-Technology',''],
+	['^(Gudga|GIM\d+)','^Gudga','Gudga',''],
 	['^(Hajaan|HS[1-9])','^Haajan','Haajan',''],
 	['^Haizhide','^Haizhide','Haizhide',''],
 	['^(Hama|FlashPen\s?Fancy)','^Hama','Hama',''],
@ -13672,6 +13709,7 @@ sub set_disk_vendors {
 	['^(INO-|i\.?norys)','^i\.?norys','i.norys',''], 
 	['^(Integrated[\s-]?Technology|IT\d+)','^Integrated[\s-]?Technology','Integrated Technology',''], 
 	['^(Iomega|ZIP\b|Clik!)','^Iomega','Iomega',''], 
+	['^(i[\s_-]?portable\b|ATCS)','^i[\s_-]?portable','i-Portable',''],
 	['^ISOCOM','^ISOCOM','ISOCOM (Shenzhen Longsys Electronics)',''],
 	['^iTE[\s-]*Tech','^iTE[\s-]*Tech(nology)?','iTE Tech',''],
 	['^(James[\s-]?Donkey|JD\d)','^James[\s-]?Donkey','James Donkey',''], 
@ -13706,6 +13744,7 @@ sub set_disk_vendors {
 	['(KIOXIA|^K[BX]G\d)','KIOXIA','KIOXIA',''], # company name comes after product ID
 	['^(KLEVV|NEO\sN|CRAS)','^KLEVV','KLEVV',''],
 	['^Kodak','^Kodak','Kodak',''],
+	['^(KOOTION)','^KOOTION','KOOTION',''],
 	['^(KUAIKAI|MSAM)','^KUAIKAI','KuaKai',''],
 	['(KUIJIA|DAHUA)','^KUIJIA','KUIJIA',''],
 	['^KUNUP','^KUNUP','KUNUP',''],
@ -13773,6 +13812,7 @@ sub set_disk_vendors {
 	['^MTRON','^MTRON','MTRON',''],
 	['^(MyDigitalSSD|BP[4X])','^MyDigitalSSD','MyDigitalSSD',''], # BP4 = BulletProof4
 	['^(Myson)','^Myson([\s-]?Century)?([\s-]?Inc\.?)?','Myson Century',''],
+	['^(Natusun|i-flashdisk)','^Natusun','Natusun',''],
 	['^(Neo\s*Forza|NFS\d)','^Neo\s*Forza','Neo Forza',''],
 	['^(Netac|OnlyDisk|S535N)','^Netac','Netac',''],
 	['^NFHK','^NFHK','NFHK',''],
@ -13816,8 +13856,10 @@ sub set_disk_vendors {
 	['^RevuAhn','^RevuAhn','RevuAhn',''],
 	['^(Ricoh|R5)','^Ricoh','Ricoh',''],
 	['^RIM[\s]','^RIM','RIM',''],
+	['^(Rococo|ITE\b|IT\d{4})','^Rococo','Rococo',''],
 	 #RTDMA008RAV2BWL comes with lenovo but don't know brand
 	['^Runcore','^Runcore','Runcore',''],
+	['^Rundisk','^Rundisk','RunDisk',''],
 	['^(S3Plus|S3\s?SSD)','^S3Plus','S3Plus',''],
 	['^(Sabrent|Rocket)','^Sabrent','Sabrent',''],
 	['^Sage','^Sage(\s?Micro)?','Sage Micro',''],
@ -13844,7 +13886,8 @@ sub set_disk_vendors {
 	['^Skill','^Skill','Skill',''],
 	['^(SMART( Storage Systems)?|TX)','^(SMART( Storage Systems)?)','Smart Storage Systems',''],
 	['^Sobetter','^Sobetter','Sobetter',''],
-	['^(S[FR]-|Sony|IM9)','^Sony','Sony',''],
+	['^(SOLIDIGM|SSDPFK)','^SOLIDIGM\b','solidgm',''],
+	['^(Sony|IM9|Microvalut|S[FR]-)','^Sony','Sony',''],
 	['^(SSSTC|CL1-)','^SSSTC','SSSTC',''],
 	['^STE[CK]','^STE[CK]','sTec',''], # wd bought this one
 	['^STORFLY','^STORFLY','StorFly',''],
@ -13916,6 +13959,7 @@ sub set_disk_vendors {
 	['^(Winton|WT\d{2})','^Winton','Winton',''],
 	['^WPC','^WPC','WPC',''], # WPC-240GB
 	['^(Wortmann(\sAG)?|Terra\s?US)','^Wortmann(\sAG)?','Wortmann AG',''],
+	['^(XDisk|X9\b)','^XDisk','XDisk',''],
 	['^(XinTop|XT-)','^XinTop','XinTop',''],
 	['^Xintor','^Xintor','Xintor',''],
 	['^XPG','^XPG','XPG',''],
@ -14466,6 +14510,7 @@ sub display_output(){
 		my ($driver_note,$resolution,$server_string) = ('','','');
 		my ($b_screen_monitors,$x_drivers);
 		$x_drivers = display_drivers_x() if !$force{'wayland'};
+		# print 'result: ', Data::Dumper::Dumper $x_drivers;
 		# print "$graphics{'x-server'} $graphics{'x-version'} $graphics{'x-vendor-release'}","\n";
 		if ($graphics{'x-server'}){
 			$server_string = $graphics{'x-server'}->[0][0];
@ -15041,7 +15086,7 @@ sub opengl_output {
 		$rows->[$j]{main::key($$num++,0,2,'compat-v')} = $compat_version;
 	}
 	if ($extra > 0){
-		$rows->[$j]{main::key($$num++,0,2,'direct render')} = $direct_render;
+		$rows->[$j]{main::key($$num++,0,2,'direct-render')} = $direct_render;
 	}
 	eval $end if $b_log;
 }
@ -16050,7 +16095,7 @@ sub display_drivers_x {
 		s3virge s3 savage siliconmotion sisimedia sisusb sis 
 		sunbw2 suncg14 suncg3 suncg6 sunffb sunleo suntcx tdfx tga trident tseng 
 		unichrome v4l vboxvideo vesa vga via vmware vmwgfx voodoo));
-		$list = qr/$list/; # i only added perl 5.14, don't use
+		# $list = qr/$list/i; # qr/../i only added perl 5.14, fails on older perls
 		my ($b_use_dri,$dri,$driver,%drivers);
 		my ($alternate,$failed,$loaded,$unloaded);
 		my $pattern = 'Failed|Unload|Loading';
@ -16059,7 +16104,7 @@ sub display_drivers_x {
 			$b_use_dri = 1;
 			$pattern .= '|DRI driver:';
 		}
-		$pattern = qr/$pattern/;
+		# $pattern = qr/$pattern/i;  # qr/../i only added perl 5.14, fails on older perls
 		# it's much cheaper to grab the simple pattern match then do the expensive one 
 		# in the main loop.
 		# @xorg = grep {/Failed|Unload|Loading/} @xorg;
@ -16132,13 +16177,13 @@ sub display_drivers_x {
 			}
 		}
 		if ($loaded || $unloaded || $failed || $alternate){
-			@$driver_data = ($loaded,$unloaded,$failed,$alternate);
+			$driver_data = [$loaded,$unloaded,$failed,$alternate];
 		}
 	}
 	eval $end if $b_log;
+	# print 'source: ', Data::Dumper::Dumper $driver_data;
 	return $driver_data;
 }
-
 ## GPU DATA ##
 sub set_amd_data {
 	$gpu_amd = [
@ -16183,12 +16228,14 @@ sub set_amd_data {
 	# 'years' => '1999-2001',
 	# },
 	# rage 5 was game cube flipper chip
+# rage 5 was game cube flipper chip 2000
 	{'arch' => 'Rage-6',
 	'ids' => '4137|4337|4437|4c59|5144|5159|515e',
 	'code' => 'R100',
 	'process' => 'TSMC 180nm',
 	'years' => '2000-07',
 	},
+	# |Radeon (7[3-9]{2}|8d{3}|9[5-9]d{2}
 	{'arch' => 'Rage-7',
 	'ids' => '4136|4150|4152|4170|4172|4242|4336|4966|496e|4c57|4c58|4c66|4c6e|' .
 	'4e51|4f72|4f73|5148|514c|514d|5157|5834|5835|5940|5941|5944|5960|5961|5962|' .
@ -16214,7 +16261,7 @@ sub set_amd_data {
 	'ids' => '3150|3151|3152|3154|3155|3171|3e50|3e54|3e70|4e4a|4e56|5460|5461|' .
 	'5462|5464|5657|5854|5874|5954|5955|5974|5975|5b60|5b62|5b64|5b65|5b66|5b70|' .
 	'5b74|5b75',
-	'code' => 'R360-R400',
+	'code' => 'Radeon IGP',
 	'process' => 'TSMC 110nm',
 	'years' => '2003-08',
 	},
@ -16236,6 +16283,7 @@ sub set_amd_data {
 	'process' => 'TSMC 90nm',
 	'years' => '2005-07',
 	},
+	# process:  tsmc 55nm, 65nm, xbox 360s at 40nm
 	{'arch' => 'TeraScale',
 	'ids' => '4346|4630|4631|9400|9401|9403|9405|940a|940b|9440|9441|9442|9443|' .
 	'9444|9446|944a|944b|944c|944e|9450|9452|9456|945a|9460|9462|946a|9480|9488|' .
@ -16244,7 +16292,7 @@ sub set_amd_data {
 	'9515|9519|9540|954f|9552|9553|9555|9557|955f|9580|9586|9587|9588|9589|958a|' .
 	'958c|9591|9593|9595|9596|9597|9598|9599|95c0|95c2|95c4|95c5|95c6|95c9|95cc|' .
 	'95cd|95cf|9610|9611|9612|9613|9614|9615|9616|9710|9712|9713|9714|9715',
-	'code' => '',
+	'code' => 'R6xx/RV6xx/RV7xx',
 	'process' => 'TSMC 55-65nm',
 	'years' => '2005-13',
 	},
@ -16271,68 +16319,72 @@ sub set_amd_data {
 	},
 	{'arch' => 'GCN-1',
 	'ids' => '154c|6600|6601|6604|6605|6606|6607|6608|6609|6610|6611|6613|6617|' .
-	'6631|6660|6663|6664|6665|6667|666f|6780|6784|6788|678a|6798|679a|679b|679e|' .
-	'679f|6800|6801|6802|6806|6808|6809|6810|6811|6816|6817|6818|6819|6820|6821|' .
-	'6822|6823|6825|6826|6827|6828|6829|682a|682b|682c|682d|682f|6835|6837|683d|' .
-	'683f',
+	'6631|6660|6663|6664|6665|6666|6667|666f|6780|6784|6788|678a|6798|6799|679a|' .
+	'679b|679e|679f|6800|6801|6802|6806|6808|6809|6810|6811|6816|6817|6818|6819|' .
+	'6820|6821|6822|6823|6825|6826|6827|6828|6829|682a|682b|682c|682d|682f|6830|' .
+	'6831|6835|6837|683d|683f|684c',
 	'code' => 'Southern Islands',
 	'process' => 'TSMC 28nm',
 	'years' => '2011-20',
 	},
+	# process: both TSMC and GlobalFoundries
 	{'arch' => 'GCN-2',
 	'ids' => '1304|1305|1306|1307|1309|130a|130b|130c|130d|130e|130f|1310|1311|' .
 	'1312|1313|1315|1316|1317|1318|131b|131c|131d|6640|6641|6646|6647|6649|664d|' .
 	'6650|6651|6658|665c|665d|665f|67a0|67a1|67a2|67a8|67a9|67aa|67b0|67b1|67b8|' .
 	'67b9|67be|9830|9831|9832|9833|9834|9835|9836|9837|9838|9839|983d|9850|9851|' .
-	'9852|9853|9854|9855|9856|9857|9858|9859|985a|985b|985c|985d|985e|985f|98e4|' .
-	'9920',
+	'9852|9853|9854|9855|9856|9857|9858|9859|985a|985b|985c|985d|985e|985f|9920',
 	'code' => 'Sea Islands',
-	'process' => 'GF/TSMC 16-28nm', # both TSMC and GlobalFoundries
+	'process' => 'GF/TSMC 16-28nm',
 	'years' => '2013-17',
 	},
 	{'arch' => 'GCN-3',
-	'ids' => '6900|6901|6907|6920|6921|6929|692b|6938|6939|693b|7300|9874',
+	'ids' => '6900|6901|6902|6907|6920|6921|6929|692b|692f|6930|6938|6939|693b|' .
+	'7300|730f|9874|98e4',
 	'code' => 'Volcanic Islands',
 	'process' => 'TSMC 28nm',
 	'years' => '2014-19',
 	},
 	{'arch' => 'GCN-4',
-	'ids' => '154e|1551|1552|1561|67c0|67c2|67c4|67c7|67ca|67cc|67cf|67d0|67d4|' .
-	'67d7|67df|67e0|67e1|67e3|67e8|67e9|67eb|67ef|67ff|694c|694e|694f|6980|6981|' .
-	'6985|6986|6987|698f|6995|699f|6fdf|9924|9925',
+	'ids' => '154e|1551|1552|1561|67c0|67c1|67c2|67c4|67c7|67ca|67cc|67cf|67d0|' .
+	'67d4|67d7|67df|67e0|67e1|67e3|67e8|67e9|67eb|67ef|67ff|694c|694e|694f|6980|' .
+	'6981|6984|6985|6986|6987|698f|6995|6997|699f|6fdf|9924|9925',
 	'code' => 'Arctic Islands',
 	'process' => 'GF 14nm',
 	'years' => '2016-20',
 	},
 	{'arch' => 'GCN-5.1',
-	'ids' => '15df|1636|1638|164c|66a0|66a1|66a2|66a3|66a7|66af|69af',
+	'ids' => '15d8|15dd|15df|15e7|1636|1638|164c|66a0|66a1|66a2|66a3|66a7|66af|' .
+	'69af',
 	'code' => 'Vega-2',
-	'process' =>  'TSMC n7 (7nm)',
-	'years' => '2018-21',
+	'process' => 'TSMC n7 (7nm)',
+	'years' => '2018-22+',
 	},
 	{'arch' => 'GCN-5',
-	'ids' => '15d8|15dd|15ff|6860|6861|6862|6863|6864|6867|6868|6869|686a|686b|' .
-	'686c|686d|686e|687f|69a0|69a1|69a2|69a3',
+	'ids' => '15d8|15d9|15dd|15e7|15ff|1636|1638|164c|66a0|66a1|66a2|66a3|66a4|' .
+	'66a7|66af|6860|6861|6862|6863|6864|6867|6868|6869|686a|686b|686c|686d|686e|' .
+	'687f|69a0|69a1|69a2|69a3|69af',
 	'code' => 'Vega',
-	'process' =>  'GF 14nm',
+	'process' => 'GF 14nm',
 	'years' => '2017-20',
 	},
 	{'arch' => 'RDNA-1',
-	'ids' => '13e9|13fe|1478|1479|1607|7310|7312|731f|7340|7341|7347|734f|7360|' .
-	'7362',
-	'code' => 'Navi',
+	'ids' => '13e9|13f9|13fe|1478|1479|1607|7310|7312|7318|7319|731a|731b|731e|' .
+	'731f|7340|7341|7343|7347|734f|7360|7362',
+	'code' => 'Navi-1x',
 	'process' => 'TSMC n7 (7nm)',
 	'years' => '2019-20',
 	},
 	{'arch' => 'RDNA-2',
-	'ids' => '13f9|1506|15e7|163f|164d|164e|1681|73a1|73a2|73a3|73a5|73ab|73ae|' .
-	'73af|73bf|73c3|73ce|73df|73e0|73e1|73e3|73ef|73ff|7421|7422|7423|7424|743f',
+	'ids' => '1506|163f|164d|164e|1681|73a0|73a1|73a2|73a3|73a5|73ab|73ae|73af|' .
+	'73bf|73c0|73c1|73c3|73ce|73df|73e0|73e1|73e3|73ef|73ff|7420|7421|7422|7423|' .
+	'7424|743f',
 	'code' => 'Navi-2x',
 	'process' => 'TSMC n7 (7nm)',
 	'years' => '2020-22',
 	},
 	{'arch' => 'RDNA-3',
-	'ids' => '15bf|164f|744c',
+	'ids' => '15bf|164f|73a8|7448|744c|745e',
 	'code' => 'Navi-3x',
 	'process' => 'TSMC n5 (5nm)',
 	'years' => '2022+',
@ -16424,56 +16476,64 @@ sub set_intel_data {
 	'years' => '2012-13',
 	},
 	{'arch' => 'Gen-6',
-	'ids' => '0102|0106|010b|010e|0112|0116|0122|0126|08cf',
-	'code' => '',
+	'ids' => '0102|0106|010a|010b|010e|0112|0116|0122|0126|08cf',
+	'code' => 'Sandybridge',
 	'process' => 'Intel 32nm',
 	'years' => '2011',
 	},
-	{'arch' => 'Gen-7',
-	'ids' => '0152|0156|015a|015e|0162|0166|016a|0172|0176',
-	'code' => '',
-	'process' => 'Intel 22nm',
-	'years' => '2012-13',
-	},
 	{'arch' => 'Gen-7.5',
-	'ids' => '0406|041e|0a06|0a16|0a22|0a26|0a2a|0a2e',
+	'ids' => '0402|0406|040a|040b|040e|0412|0416|041a|041b|041e|0422|0426|042a|' .
+	'042b|042e|0a02|0a06|0a0a|0a0b|0a0e|0a12|0a16|0a1a|0a1b|0a1e|0a22|0a26|0a2a|' .
+	'0a2b|0a2e|0c02|0c06|0c0a|0c0b|0c0e|0c12|0c16|0c1a|0c1b|0c1e|0c22|0c26|0c2a|' .
+	'0c2b|0c2e|0d02|0d06|0d0a|0d0b|0d0e|0d12|0d16|0d1a|0d1b|0d1e|0d22|0d26|0d2a|' .
+	'0d2b|0d2e',
 	'code' => '',
 	'process' => 'Intel 22nm',
 	'years' => '2013',
 	},
+	{'arch' => 'Gen-7',
+	'ids' => '0152|0155|0156|0157|015a|015e|0162|0166|016a|0172|0176|0f31|0f32|' .
+	'0f33',
+	'code' => '',
+	'process' => 'Intel 22nm',
+	'years' => '2012-13',
+	},
 	{'arch' => 'Gen-8',
-	'ids' => '1602|160a|160b|160d|160e|1612|1616|161a|161b|161d|161e|1622|1626|' .
-	'162a|162b|162d|162e|1632|1636|163a|163b|163d|163e|22b0|22b1',
+	'ids' => '1602|1606|160a|160b|160d|160e|1612|1616|161a|161b|161d|161e|1622|' .
+	'1626|162a|162b|162d|162e|1632|1636|163a|163b|163d|163e|22b0|22b1|22b2|22b3',
 	'code' => '',
 	'process' => 'Intel 14nm',
 	'years' => '2014-15',
 	},
-	{'arch' => 'Gen-9',
-	'ids' => '1902|1906|190b|1912|1916|191b|191d|191e|1921|1923|1926|1927|192b|' .
-	'192d|1932|193a|193b|193d|5a84|5a85',
-	'code' => '',
-	'process' => 'Intel 14n',
-	'years' => '2015-16',
-	},
 	{'arch' => 'Gen-9.5',
-	'ids' => '3184|3185|3e90|3e91|3e92|3e93|3e94|3e96|3e98|3e9a|3e9b|3e9c|3ea0|' .
-	'3ea1|3ea5|3ea6|3ea8|3ea9|5902|5906|590b|5912|5916|5917|591b|591c|591d|591e|' .
-	'5921|5923|5926|5927|87c0|87ca|9b21|9b41|9ba4|9ba8|9baa|9bac|9bc4|9bc5|9bc6|' .
-	'9bc8|9bca|9bcc|9be6|9bf6',
+	'ids' => '3184|3185|3e90|3e91|3e92|3e93|3e94|3e96|3e98|3e99|3e9a|3e9b|3e9c|' .
+	'3ea0|3ea1|3ea2|3ea3|3ea4|3ea5|3ea6|3ea7|3ea8|3ea9|5902|5906|5908|590a|590b|' .
+	'590e|5912|5913|5915|5916|5917|591a|591b|591c|591d|591e|5921|5923|5926|5927|' .
+	'593b|87c0|87ca|9b21|9b41|9ba0|9ba2|9ba4|9ba5|9ba8|9baa|9bab|9bac|9bc0|9bc2|' .
+	'9bc4|9bc5|9bc6|9bc8|9bca|9bcb|9bcc|9be6|9bf6',
 	'code' => '',
 	'process' => 'Intel 14nm',
 	'years' => '2016-20',
 	},
+	{'arch' => 'Gen-9',
+	'ids' => '0a84|1902|1906|190a|190b|190e|1912|1913|1915|1916|1917|191a|191b|' .
+	'191d|191e|1921|1923|1926|1927|192a|192b|192d|1932|193a|193b|193d|1a84|1a85|' .
+	'3184|3185|5a84|5a85',
+	'code' => '',
+	'process' => 'Intel 14n',
+	'years' => '2015-16',
+	},
 	# gen10 was cancelled., 
 	{'arch' => 'Gen-11',
-	'ids' => '0d16|0d26|0d36|4555|4571|4e55|4e61|4e71|8a51|8a52|8a53|8a56|8a58|' .
-	'8a5a|8a5c|9840|9841',
+	'ids' => '0d16|0d26|0d36|4555|4571|4e55|4e61|4e71|8a50|8a51|8a52|8a53|8a54|' .
+	'8a56|8a57|8a58|8a59|8a5a|8a5b|8a5c|8a5d|8a71|9840|9841',
 	'code' => '',
 	'process' => 'Intel 10nm',
 	'years' => '2019-21',
 	},
 	{'arch' => 'Gen-12.1',
-	'ids' => '4905|4908|4c8a|4c8b|4c90|4c9a|9a40|9a49|9a60|9a68|9a70|9a78',
+	'ids' => '4905|4908|4c8a|4c8b|4c8c|4c90|4c9a|9a40|9a49|9a60|9a68|9a70|9a78|' .
+	'9ac0|9ac9|9ad9|9af8',
 	'code' => '',
 	'process' => 'Intel 10nm',
 	'years' => '2020-21',
@ -16494,9 +16554,14 @@ sub set_intel_data {
 	},
 	# Jupiter Sound cancelled?
 	{'arch' => 'Gen-12.7',
-	'ids' => '',
+	'ids' => '5690|5691|5692|5693|5694|56a0|56a1|56a5|56a6',
 	'code' => 'Alchemist',
-	'pattern' => 'Alchemist|DG2|Arc A\d{3}M?',
+	'process' => 'TSMC n6 (7nm)',
+	'years' => '2022+',
+	},
+	{'arch' => 'Gen-12.7',
+	'ids' => '56c0|56c1',
+	'code' => 'XeHPG',
 	'process' => 'TSMC n6 (7nm)',
 	'years' => '2022+',
 	},
@ -17183,6 +17248,7 @@ sub map_monitor_ids {
 	# s: DVI-I-1 d: DVI0; s: VGA-1 d: VGA1; s: DP-1-1; d: DP-1-1;
 	# s: eDP-1 d: eDP-1-1 (yes, reversed from normal deviation!); s: eDP-1 d: eDP
 	# worst: s: DP-6 d: DP-2-3 (2 banks of 3 according to X); s: eDP-1 d: DP-4;
+	# s: DP-3 d: DP-1-1; s: DP-4 d: DP-1-2
 	# s: DP-3 d: DP-4 [yes, +1, not -]; 
 	my ($d_1,$d_2,$d_m,$s_1,$s_2,$s_m);
 	my $b_single = (scalar @sys_ids == 1) ? 1 : 0;
@ -17281,9 +17347,9 @@ sub get_compositors {
 		my @compositors = qw(budgie-wm compiz compton enlightenment gnome-shell 
 		kwin_wayland kwin_x11 kwinft marco muffin mutter);
 		# these are more obscure, so check for them after primary common ones
-		push (@compositors,qw(3dwm dcompmgr gala kmscon metisse mir moblin 
-		monsterwm picom ukwm unagi unity-system-compositor xcompmgr xfwm4 
-		xfwm5 xfwm));
+		push (@compositors,qw(3dwm cosmic-comp dcompmgr gala kmscon 
+		metisse mir moblin monsterwm picom ukwm unagi unity-system-compositor 
+		xcompmgr xfwm4 xfwm5 xfwm));
 		my $matches = join('|',@compositors) . $wl_compositors;
 		foreach my $psg (@ps_gui){
 			if ($psg =~ /^($matches)$/){
@ -20202,7 +20268,7 @@ sub cpu_processes {
 		main::key($num++,1,3,'command') => $command->[0],
 		});
 		if ($command->[1]){
-			$rows->[$j]{main::key($num++,0,4,'started by')} = $command->[1];
+			$rows->[$j]{main::key($num++,0,4,'started-by')} = $command->[1];
 		}
 		$pid = (defined $pid_col)? $row[$pid_col] : 'N/A';
 		$rows->[$j]{main::key($num++,0,3,'pid')} = $pid;
@ -20265,7 +20331,7 @@ sub mem_processes {
 		main::key($num++,1,3,'command') => $command->[0],
 		});
 		if ($command->[1]){
-			$rows->[$j]{main::key($num++,0,4,'started by')} = $command->[1];
+			$rows->[$j]{main::key($num++,0,4,'started-by')} = $command->[1];
 		}
 		$pid = (defined $pid_col)? $row[$pid_col] : 'N/A';
 		$rows->[$j]{main::key($num++,0,3,'pid')} = $pid;
@ -23022,7 +23088,7 @@ sub get_repos_linux {
 				# get the repo
 				$repo = $2;
 				push(@$rows, 
-				{main::key($num++,1,1,'urpmq repo') => $repo},
+				{main::key($num++,1,1,'urpm repo') => $repo},
 				[@content],
 				);
 				@content = ();
@ -25600,6 +25666,7 @@ sub get {
 	my $num = 0;
 	my $location = [];
 	location_data($location);
+	# print Data::Dumper::Dumper $location;exit;
 	if (!$location->[0]){
 		@$rows = ({
 		main::key($num++,0,1,'Message') => main::message('weather-null','current location')
@ -27630,27 +27697,27 @@ sub pci_grabber {
 		# 2.2.8 lspci did not support -k, added in 2.2.9, but -v turned on -k 
 		$args = ' -nnv';
 		$path = $alerts{'lspci'}->{'path'};
-		$pattern = qr/^[0-9a-f]+:/;
+		$pattern = q/^[0-9a-f]+:/; # i only added perl 5.14, don't use qr/
 	}
 	elsif ($program eq 'pciconf'){
 		$args = ' -lv';
 		$path = $alerts{'pciconf'}->{'path'};
-		$pattern = qr/^([^@]+)\@pci/;
+		$pattern = q/^([^@]+)\@pci/; # i only added perl 5.14, don't use qr/
 	}
 	elsif ($program eq 'pcidump'){
 		$args = ' -v';
 		$path = $alerts{'pcidump'}->{'path'};
-		$pattern = qr/^[0-9a-f]+:/;
+		$pattern = q/^[0-9a-f]+:/; # i only added perl 5.14, don't use qr/
 	}
 	elsif ($program eq 'pcictl'){
 		$args = ' pci0 list -N';
 		$path = $alerts{'pcictl'}->{'path'};
-		$pattern = qr/^[0-9a-f:]+:/;
+		$pattern = q/^[0-9a-f:]+:/; # i only added perl 5.14, don't use qr/
 	}
 	elsif ($program eq 'pcictl-n'){
 		$args = ' pci0 list -n';
 		$path = $alerts{'pcictl'}->{'path'};
-		$pattern = qr/^[0-9a-f:]+:/;
+		$pattern = q/^[0-9a-f:]+:/; # i only added perl 5.14, don't use
 	}
 	if ($fake{'lspci'} || $fake{'pciconf'} || $fake{'pcictl'} || $fake{'pcidump'}){
 		# my $file = "$fake_data_dir/pciconf/pci-freebsd-8.2-2";
@ -28771,11 +28838,13 @@ sub system_base_bsd {

 sub system_base {
 	eval $start if $b_log;
+	# Need data on these Arch derived: CachyOS
 	my $base_distro_arch = 'anarchy|antergos|arch(bang|craft|labs|man|strike)|arco|artix';
 	# note: arch linux derived distro page claims kaos as arch derived but it is NOT
-	$base_distro_arch .= '|blackarch|bluestar|chakra|ctios|endeavour|garuda|hyperbola|linhes';
-	$base_distro_arch .= '|mabox|manjaro|mysys2|netrunner\s?rolling|ninja|obarun|parabola';
-	$base_distro_arch .= '|puppyrus-?a|reborn|snal|steamos|talkingarch|ubos';
+	$base_distro_arch .= '|blackarch|bluestar|cachyos|chakra|ctios';
+	$base_distro_arch .= '|endeavour|garuda|hyperbola|linhes';
+	$base_distro_arch .= '|mabox|manjaro|mysys2|netrunner\s?rolling|ninja|obarun';
+	$base_distro_arch .= '|parabola|puppyrus-?a|reborn|snal|steamos|talkingarch|ubos';
 	my $base_file_debian_version = 'sidux';
 	# detect debian steamos before arch steamos
 	my $base_osr_debian_version = '\belive|lmde|neptune|parrot|pureos|rescatux|';
@ -31295,8 +31364,8 @@ sub set_ps_gui {
 	# compositors (for wayland these are also the server, note.
 	# for wayland always show, so always load these
 	if ($show{'graphic'}){
-		@temp=qw(3dwm budgie-wm cairo compiz compton deepin-wm dcompmgr enlightenment 
-		gala gnome-shell kmscon kwin_wayland kwin_x11 kwinft kwin
+		@temp=qw(3dwm budgie-wm cairo compiz compton cosmic-comp deepin-wm dcompmgr 
+		enlightenment gala gnome-shell kmscon kwin_wayland kwin_x11 kwinft kwin
 		marco metisse mir moblin muffin mutter picom steamcompmgr 
 		ukwm unagi unity-system-compositor wayland xcompmgr xfwm[45]?);
 		push(@match,@temp);
@ -31318,7 +31387,7 @@ sub set_ps_gui {
 		weston wio\+? wxr[cd] xuake));
 		$matches .= $wl_compositors;
 	}
-	$matches = qr/$matches/;
+	$matches = qr/$matches/; # remember qr/../i only added perl 5.014
 	foreach (@ps_cmd){
 		if (/^(|[\S]*\/)($matches)(\/|\s|$)/){
 			$working = $2;
--- a/inxi.1
+++ b/inxi.1
@ -1,5 +1,5 @@
 .\"  inxi.1 - manpage for inxi system information tool
-.\"  Copyright (C) 2022 Harald Hope
+.\"  Copyright (C) 2023 Harald Hope
 .\"
 .\"  This program is free software; you can redistribute it and/or modify
 .\"  it under the terms of the GNU General Public License as published by
@ -15,7 +15,7 @@
 .\"  with this program; if not, write to the Free Software Foundation, Inc.,
 .\"  51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 .\"  
-.TH INXI 1 "2022\-11\-02" "inxi" "inxi manual"
+.TH INXI 1 "2023\-02\-07" "inxi" "inxi manual"

 .SH NAME
 inxi \- Command line system information script for console and IRC
@ -177,6 +177,10 @@ See \fB\-E\fR.
 .br
 See \fBOUTPUT CONTROL OPTIONS\fR.

+.TP
+.B \-\-config\fR, \fB\-\-configuration\fR
+Show active configuration values, by file, and exit.
+
 .TP
 .B \-C \fR, \fB\-\-cpu\fR
 Show full CPU output (if each item available): basic CPU topology, model, type, 
@ -324,7 +328,7 @@ and active \fBgpu:\fR drivers), display protocol (if available), display server

 \fBDisplay: x11 server: Xorg v: 1.15.1\fR

-or
+or:

 \fBDisplay: wayland server: X.org v: 1.20.1 with: Xwayland v: 20.1\fR

@ -332,6 +336,9 @@ If protocol is not detected, shows:

 \fBDisplay: server: Xorg 1.15.1\fR

+Adds \fBwith: Xwayland v:...\fR if xwayland server is installed, regardless of 
+protocol. 
+
 Also shows screen resolution(s) (per monitor/X screen). Shows graphics API used, 
 like OpenGL. For X.org: OpenGL renderer, OpenGL core profile version/OpenGL 
 version; for VESA: data (for Xvesa); for Wayland: GBM/EGL data (not 
@ -347,7 +354,7 @@ advanced monitor data (full modes, chroma, etc.).
 .B \-h \fR, \fB\-\-help\fR
 The help menu. Features dynamic sizing to fit into terminal window. Set script 
 global \fBCOLS_MAX_CONSOLE\fR if you want a different default value, or use 
-\fB\-y <width>\fR to temporarily override the defaults or actual window width.
+\fB\-y [width]\fR to temporarily override the defaults or actual window width.

 .TP
 .B \-i \fR, \fB\-\-ip\fR
@ -850,7 +857,7 @@ weather when you need to see it, for example, on a remote server. If you did not
 type the weather option in manually, it's an automated request. 

 .TP
-.B \-W\fR, \fB\-\-weather\-location <location_string>\fR
+.B \-W\fR, \fB\-\-weather\-location [location_string]\fR
 Get weather/time for an alternate location. Accepts postal/zip code[, country], 
 city,state pair, or latitude,longitude. Note: city/country/state names must 
 not contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces 
@ -875,7 +882,7 @@ weather when you need to see it, for example, on a remote server. If you did not
 type the weather option in manually, it's an automated request. 

 .TP
-.B \-\-weather\-source\fR, \fB\-\-ws <unit>\fR
+.B \-\-weather\-source\fR, \fB\-\-ws [unit]\fR
 [\fB1\-9\fR] Switches weather data source. Possible values are \fB1\-9\fR. 
 \fB1\-4\fR will generally be active, and \fB5\-9\fR may or may not be active, 
 so check. \fB1\fR may not support city / country names with spaces (even if 
@ -889,7 +896,7 @@ on occasions, so try each one and see which you prefer. If you get unsupported
 source message, it means that number has not been implemented.

 .TP
-.B \-\-weather\-unit <unit>\fR
+.B \-\-weather\-unit [unit]\fR
 [\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR] Sets weather units to metric (\fBm\fR), 
 imperial (\fBi\fR), metric (imperial) (\fBmi\fR, default), imperial (metric) 
 (\fBim\fR). If metric or imperial not found,sets to default value, or \fBN/A\fR.
@ -973,7 +980,7 @@ These color selectors run a color selector option prior to inxi starting
 which lets you set the config file value for the selection.

 NOTE: All configuration file set color values are removed when output is 
-piped or redirected. You must use the explicit runtime \fB\-c <color number>\fR 
+piped or redirected. You must use the explicit runtime \fB\-c [color number]\fR 
 option if you want color codes to be present in the piped/redirected output.

 Color selectors for each type display (NOTE: IRC and global only show safe 
@ -1006,6 +1013,11 @@ Konversation etc.

 Setting a specific color type removes the global color selection.

+.TP
+.B \-\-export [json|screen|xml]\fR
+.br
+See \fB\-\-output\fR.
+
 .TP
 .B \-\-indent [11\-xx]\fR
 Change primary wide indent width. Generally useless. Only applied if output 
@ -1036,11 +1048,18 @@ of line starter occurs. If \fB80\fR or less, no wrapping will occur. Overrides
 internal default value (110) and user configuration value \fBMAX_WRAP\fR.

 .TP
-.B \-\-output [json|screen|xml]\fR
+.B \-\-output\fR, \fB \-\-export [json|screen|xml]\fR
 Change data output type. Requires \-\-output\-file if not \fBscreen\fR.

+See this page \fIhttps://smxi.org/docs/inxi-json-xml-output.htm\fR BEFORE you 
+post an issue about not understanding, or being unable to use, the output 
+format! That gives a fairly complete explanation of what the output means, and 
+how to work with it. It is not a tutorial, and it will not teach you to program, 
+if you don't know how to work with json/xml structures using a proper language, 
+then this feature is not meant for you.
+
 .TP
-.B \-\-output\-file [full path to output file|print]\fR
+.B \-\-output\-file, \fB \-\-export\-file [full path to output file|print]\fR
 The given directory path must exist. The directory path given must exist,
 The \fBprint\fR options prints to stdout.
 Required for non\-screen \fB\-\-output\fR formats (json|xml).
@ -1069,6 +1088,11 @@ sort will be random.

 \fBused\fR \- KiB used of partition.

+.TP
+.B \-\-separator\fR, \fB\-\-sep [character(s)]\fR
+Change the default output key: value separator \fB:\fR to something else. Make
+permanent with configuration item \fBSEP2_CONSOLE\fR.
+
 .TP
 .B \-\-wrap\-max [integer]\fR
 .br
@ -2100,7 +2124,7 @@ Graphics:
    size: 376x301mm (14.8x11.85") diag: 482mm (19") ratio: 5:4 modes:
    max: 1280x1024 min: 720x400
  API: OpenGL renderer: AMD CEDAR (DRM 2.50.0 / 5.16.0-11.1\-liquorix-amd64 LLVM
-    12.0.1) v: 3.3 Mesa 21.2.6 compat\-v: 3.1 direct render: Yes
+    12.0.1) v: 3.3 Mesa 21.2.6 compat\-v: 3.1 direct-render: Yes
 ....\fR
 .fi
 Wayland sample, with Sway/swaymsg:
@ -2594,6 +2618,13 @@ Automatically uploads debugger data tar.gz file to \fIftp.smxi.org\fR, then
 removes the debug data directory and the tar.gz file.
 See \fB\-\-ftp\fR for uploading to alternate locations.

+.TP
+.B \-\-debug\-id [string]\fR
+Insert string to file name for debugger. This is helpful so you can add for 
+instance a username to a debugger dataset to make it easy to find.
+
+Sample: \fB\-\-debug 22 \-\-debug\-id mrmazda\fR
+
 .TP
 .B \-\-fake\-data\-dir\fR
 Developer only: Change default location of $fake_data_dir, which is where files 
@ -2703,23 +2734,23 @@ inxi will read its configuration/initialization files in the
 following order:

 \fB/etc/inxi.conf\fR contains the default configurations. These can be 
-overridden by creating a \fB/etc/inxi.d/inxi.conf\fR file (global override, 
+overridden by creating a \fB/etc/inxi.d/inxi.conf\fR file (global override), 
 which will prevent distro packages from changing or overwriting your edits. This 
 method is recommended if you are using a distro packaged inxi and want to 
-override some configuration items from the package's default 
+override some global configuration items from the package's default 
 \fB/etc/inxi.conf\fR file but don't want to lose your changes on a package 
 update. 

-You can old override, per user, with a user configuration file found in one of 
+You can also override, per user, with a user configuration file found in one of 
 the following locations (inxi will store its config file using the following 
-precedence:
+precedence):

 if \fB$XDG_CONFIG_HOME\fR is not empty, it will go there, else if
-\fB$HOME/.conf/inxi.conf\fR exists, it will go there, and as a last default,
+\fB$HOME/.config/inxi.conf\fR exists, it will go there, and as a last default,
 the legacy location is used), i.e.:

-\fB$XDG_CONFIG_HOME/inxi.conf\fR > \fB$HOME/.conf/inxi.conf\fR >
-\fB$HOME/.inxi/inxi.conf\fR
+\fB$XDG_CONFIG_HOME/inxi.conf\fR > \fB$HOME/.config/inxi.conf\fR >
+\fB$HOME/.inxi/inxi.conf\fR > \fB/etc/inxi.d/inxi.conf\fR > \fB/etc/inxi.conf\fR

 .SH CONFIGURATION OPTIONS

@ -2800,7 +2831,8 @@ Override with \fB\-\-sensors\-default\fR. See \fB\-\-sensors\-exclude\fR.
 \fBSENSORS_USE\fR Use only supplied sensor array[s]. Override with 
 \fB\-\-sensors\-default\fR. See \fB\-\-sensors\-use\fR.

-\fBSEP2_CONSOLE\fR Replaces default key / value separator of '\fB:\fR'.
+\fBSEP2_CONSOLE\fR Replaces default key / value separator of '\fB:\fR'. Test 
+with \fB\-\-separator\fR.

 \fBUSB_SYS\fR Forces all USB data to use \fB/sys\fR instead of \fBlsusb\fR.

@ -2830,7 +2862,7 @@ options available in \fB\-c 94\-99\fR.

 NOTE: All default and configuration file set color values are removed when 
 output is piped or redirected. You must use the explicit 
-\fB\-c <color number>\fR option if you want colors to be present in the 
+\fB\-c [color number]\fR option if you want colors to be present in the 
 piped/redirected output (creating a PDF for example).

 \fBCONSOLE_COLOR_SCHEME\fR The color scheme for console output (not in 
@ -2874,13 +2906,16 @@ Post on inxi forums:
 You can also visit \fRchannel:\fI #smxi\fR to post issues on either network.

 .SH HOMEPAGE
-.I  https://github.com/smxi/inxi\fR \- Home of the source code, and tech docs 
+.I  https://github.com/smxi/inxi
+\fR \- Home of the source code, and tech docs 
 (\fIinxi\-perl/docs\fR).

-.I  https://smxi.org/docs/inxi.htm\fR \- The main docs for inxi. See 
+.I  https://smxi.org/docs/inxi.htm
+\fR \- The main docs for inxi. See 
 \fIinxi\-perl/docs\fR for more technical docs.

-.I https://fosstodon.org/@smxi\fR \- Follow @smxi on Mastodon!
+.I https://fosstodon.org/@smxi
+\fR \- Follow @smxi on Mastodon!

 .SH  AUTHOR AND CONTRIBUTORS TO CODE

@ -2890,7 +2925,7 @@ is a fork of \fBlocsmif\fR's very clever \fBinfobash\fR script.
 Original infobash author and copyright holder:
 Copyright (C) 2005\-2007 Michiel de Boer aka locsmif

-inxi version: Copyright (C) 2008\-2021 Harald Hope
+inxi version: Copyright (C) 2008\-2023 Harald Hope

 This man page was originally created by Gordon Spencer (aka aus9) and is
 maintained by Harald Hope (aka h2 or TechAdmin).
--- a/inxi.changelog
+++ b/inxi.changelog
@ -1,3 +1,199 @@
+================================================================================
+Version: 3.3.25
+Patch: 00
+Date: 2022-??-??
+--------------------------------------------------------------------------------
+RELEASE NOTES:
+--------------------------------------------------------------------------------
+
+A small point release, various smaller items, ongoing updates to matching table 
+features, bug fixes, but nothing major.
+
+--------------------------------------------------------------------------------
+SPECIAL THANKS:
+
+1. Thanks Umio-Yasuno in github issue #281 for actually being proactive and 
+finding some Intel/AMD gpu device id lists. I wish more issues would be like 
+that.
+
+--------------------------------------------------------------------------------
+KNOWN ISSUES:
+
+1. DEBUG: --debug-arg and --debug-arg-use must use the full format: 
+--debug-arg="-GS", or else the command line eats the args, even if in quotes. 
+The error handlers will then complain about no data supplied, and it will exit.
+
+--------------------------------------------------------------------------------
+BUGS:
+
+1. GRAPHICS: An accidental 'and' instead of 'or' test (see Code 1) led to 
+systems without gpu or dri graphics drivers not showing their xorg driver even 
+when present. This was due to a mistake, and also due to how Perl handles || and 
+&& in sequence, which made this bug not show up until I tested on a system with 
+xorg graphics driver, but without dri or gpu drivers. Virtually no modern 
+hardware or operating systems would trip this condition, but older hardware and 
+operating systems, which may not have gpu or dri drivers, might. And did, in my 
+case. This is by the way why I try to test on old hardware at least now and 
+then.
+
+--------------------------------------------------------------------------------
+FIXES:
+
+1. CODE: A poorly done attempt at optimization would have broken case 
+insensitive pre-compiled regex with $pattern = qr/../ because you can't add 
+/$pattern/i to precompiled pattern, but qr/.../i support only added perl 5.014. 
+This should impact almost nobody, but it is/was a glitch. Basically qr/../ can 
+only be used when no /i type modifier is required if supporting Perl less than 
+5.014.
+
+See inxi-perl/docs/optimization.txt section REGEX for more on this.
+
+Note that Perl already compares the values in the variable each iteration via a 
+simple equality test, so the only real gain from using qr// is not having to do 
+that equality test each iteration of a loop.
+
+2. OUTPUT: Fixed a few small inner key name failures to use '-' instead of ' ' 
+to separate key terms:
+
+3. REPOS: Called urpm urpmq, which is the query tool, not the actual type.
+
+4. GRAPHICS: Fixed some gpu_id.pl matching rules. Thanks Umio-Yasuno in github 
+issue #281 for noticing that some of the matching rules were either wrong or not 
+loose enough.
+
+--------------------------------------------------------------------------------
+ENHANCEMENTS:
+
+1a. OPTIONS: Long time oversight, no option to test or do one time change of key: 
+value separator string ':'. This goes along with existing config option 
+SEP2_CONSOLE. Added --separator/--sep {character}.
+
+1b. OPTIONS: Added synonym for --output: --export, and for --output-file:
+--export-file.
+
+2a. GRAPHICS: New Intel gpu data source, from intel, finally. This let us add a 
+lot more gpu ids. Thanks Umio-Yasuno in github issue #281 for finding these.
+
+2b. GRAPHICS: New AMD data source, from github. This let me fill in some more, 
+albeit not as accurately as previous sources, but added more so fine. Thanks 
+Umio-Yasuno in github issue #281 for finding these.
+
+3. CONFIG: In a first, took a feature from acxi, --config, and imported it into 
+inxi! This shows active current configuration, by file.
+
+4. CPU: updated, fine tuned amd cpu microarch ids.
+
+5. DISKS: More disk vendors added. Not as many as usual, I think the high tech 
+sanctions against China may be slowing the rate of new Chinese SSD/USB vendors.
+But still some new ones, as always. Not many new IDs for existing ones though,
+that is noteworthy. A few new data sources to help pinpoint vendor names found 
+too, though those won't in general impact users, but can be used to determine if
+a string is in fact a company name.
+
+--------------------------------------------------------------------------------
+CHANGES:
+
+1. OUTPUT: Fix 2, -t 'started by:' key name changed to: started-by:
+-G 'direct render:' changed to 'direct-render:'.
+
+--------------------------------------------------------------------------------
+DOCUMENTATION:
+
+1a. MAN: there were a few <...> instead of [...] for required option arguments. 
+Fixed those.
+
+1b. MAN: also added --debug-id [string] since that is in general useful info.
+
+1c. MAN: Added qualifiers about when xwayland: and compositor: items appear for 
+default -Ga output.
+
+1d. MAN: Typo in config path in man page, .conf/ should be .config/.
+
+1e. MAN: for --output json/xml, added pointer to doc page on smxi.org, people 
+being unable to grasp the output is getting tiresome.
+
+1f. MAN: Added synonym for --output, --export.
+
+2a. SMXI.ORG DOCS: added --output json/xml documentation page: 
+https://smxi.org/docs/inxi-json-xml-output.htm - this is also linked to from the 
+github wiki page, though of course nobody is going to read it, as well as from 
+a few pages in smxi.org.
+
+2b. Updated inxi-man,options,changelog.htm files.
+
+3. CHANGELOG: Changed to use same format as acxi.changelog, leading topic id's
+in upper case, makes it easier to scan read and organize.
+
+4a. DOCS: docs/inxi-cpu.txt - cleaned up, re-arranged a bit, added cpuid data 
+explanation, and updated header on inxi-perl/data/cpu/microarch to better 
+explain the way amd does ext fam / ext model, which are not the same, 
+bizarrrely, very confusing.
+
+4b. DOCS: New: docs/inxi-disks.txt. Split out from inxi-resources.txt, part of
+the ongoing to documentation modularization, slowly splitting out sub topics 
+from inxi-data.txt and inxi-resources.txt. Note this is in general only done 
+when I'm working on that specific feature. But slowly, surely.
+
+--------------------------------------------------------------------------------
+CODE:
+
+1. GRAPHICS: Test when no gpu drivers and no dri drivers but x drivers never 
+showed x driver. Was supposed to be all || for tests:
+
+if (@$gpu_drivers || $graphics{'dri-drivers'} && @$x_drivers){
+
+https://perldoc.perl.org/perlop. I believe this led to test 1 being false, test 
+2 being false, and since that left tests 2 and 3 needing to be true for the && 
+logical and to be true. Since only one of the two was true, the last bit was 
+seen as false. 
+
+2. GRAPHICS: Connected with 1, noticed that for some weird reason, I'd decided 
+to assign the array ref for drivers like this:
+
+@$x_drivers = (a, b, c);
+when it was supposed to be:
+$x_drivers = [a,b,c];
+
+This did not cause any issues, since they mean the same thing, but it was silly
+to write it that way.
+
+3a. DEBUG: Added --debug-arg-use which allows testers to run a specific argument 
+combination that may be causing issues.
+
+3b. DEBUG: Also added more validation, to make sure arg for --debug-arg / 
+--debug-arg-use start with - or -- followed by a letter.
+
+4. START: Removed this code block from set_konvi_data. I had left this in place 
+for a release or two to make sure no need for it was found, but it will never be 
+used since it never worked in the first place.
+	# my $config_cmd = '';
+	# there's no current kde 5 konvi config tool that we're aware of. Correct if changes.
+	# This part may never have worked, but I don't have legacy data to determine.
+	# The idea was to get inxi.conf files from konvi data stores, but that was never right.
+	# if (main::check_program('kde4-config')){
+	#	$config_cmd = 'kde4-config --path data';
+	# }
+	# kde5-coinfig never existed, was replaced by $XDG_DATA_HOME in KDE
+	# elsif (main::check_program('kde-config')){
+	# 	$config_cmd = 'kde-config --path data';
+	# }
+	# elsif (main::check_program('qtpaths')){
+	# 	$config_cmd = 'qtpaths --paths GenericDataLocation';
+	# }
+	# The section below is on request of Argonel from the Konversation developer team:
+	# it sources config files like $HOME/.kde/share/apps/konversation/scripts/inxi.conf
+	#  if ($config_cmd){
+	#	  my @data = main::grabber("$config_cmd 2>/dev/null",':');
+	# 	Configs::set(\@data) if @data;
+	#	 main::log_data('dump',"kde config \@data",\@data) if $b_log;
+	# }
+	
+5. OPTIONS: in OptionsHandler::post_process(), reorganized the various run and 
+exit triggers, help, configs, recommends, version, etc. All on top now.
+
+--------------------------------------------------------------------------------
+-- Harald Hope - Sun, 18 Dec 2022 14:22:22 -0800
+
 ================================================================================
 Version: 3.3.24
 Patch: 00