mirror of
https://github.com/smxi/inxi.git
synced 2024-11-16 08:11:39 +00:00
armbsdcli-utilitieslinuxperlperl5remote-admin-toolsupport-toolssysadmin-toolsysinfosystem-administration
464cac2f1e
features, bug fixes, but nothing major. -------------------------------------------------------------------------------- SPECIAL THANKS: 1. Thanks Umio-Yasuno in github issue #281 for actually being proactive and finding some Intel/AMD gpu device id lists. I wish more issues would be like that. -------------------------------------------------------------------------------- KNOWN ISSUES: 1. DEBUG: --debug-arg and --debug-arg-use must use the full format: --debug-arg="-GS", or else the command line eats the args, even if in quotes. The error handlers will then complain about no data supplied, and it will exit. -------------------------------------------------------------------------------- BUGS: 1. GRAPHICS: An accidental 'and' instead of 'or' test (see Code 1) led to systems without gpu or dri graphics drivers not showing their xorg driver even when present. This was due to a mistake, and also due to how Perl handles || and && in sequence, which made this bug not show up until I tested on a system with xorg graphics driver, but without dri or gpu drivers. Virtually no modern hardware or operating systems would trip this condition, but older hardware and operating systems, which may not have gpu or dri drivers, might. And did, in my case. This is by the way why I try to test on old hardware at least now and then. -------------------------------------------------------------------------------- FIXES: 1. CODE: A poorly done attempt at optimization would have broken case insensitive pre-compiled regex with $pattern = qr/../ because you can't add /$pattern/i to precompiled pattern, but qr/.../i support only added perl 5.014. This should impact almost nobody, but it is/was a glitch. Basically qr/../ can only be used when no /i type modifier is required if supporting Perl less than 5.014. See inxi-perl/docs/optimization.txt section REGEX for more on this. Note that Perl already compares the values in the variable each iteration via a simple equality test, so the only real gain from using qr// is not having to do that equality test each iteration of a loop. 2. OUTPUT: Fixed a few small inner key name failures to use '-' instead of ' ' to separate key terms: 3. REPOS: Called urpm urpmq, which is the query tool, not the actual type. 4. GRAPHICS: Fixed some gpu_id.pl matching rules. Thanks Umio-Yasuno in github issue #281 for noticing that some of the matching rules were either wrong or not loose enough. -------------------------------------------------------------------------------- ENHANCEMENTS: 1a. OPTIONS: Long time oversight, no option to test or do one time change of key: value separator string ':'. This goes along with existing config option SEP2_CONSOLE. Added --separator/--sep {character}. 1b. OPTIONS: Added synonym for --output: --export, and for --output-file: --export-file. 2a. GRAPHICS: New Intel gpu data source, from intel, finally. This let us add a lot more gpu ids. Thanks Umio-Yasuno in github issue #281 for finding these. 2b. GRAPHICS: New AMD data source, from github. This let me fill in some more, albeit not as accurately as previous sources, but added more so fine. Thanks Umio-Yasuno in github issue #281 for finding these. 3. CONFIG: In a first, took a feature from acxi, --config, and imported it into inxi! This shows active current configuration, by file. 4. CPU: updated, fine tuned amd cpu microarch ids. 5. DISKS: More disk vendors added. Not as many as usual, I think the high tech sanctions against China may be slowing the rate of new Chinese SSD/USB vendors. But still some new ones, as always. Not many new IDs for existing ones though, that is noteworthy. A few new data sources to help pinpoint vendor names found too, though those won't in general impact users, but can be used to determine if a string is in fact a company name. -------------------------------------------------------------------------------- CHANGES: 1. OUTPUT: Fix 2, -t 'started by:' key name changed to: started-by: -G 'direct render:' changed to 'direct-render:'. -------------------------------------------------------------------------------- DOCUMENTATION: 1a. MAN: there were a few <...> instead of [...] for required option arguments. Fixed those. 1b. MAN: also added --debug-id [string] since that is in general useful info. 1c. MAN: Added qualifiers about when xwayland: and compositor: items appear for default -Ga output. 1d. MAN: Typo in config path in man page, .conf/ should be .config/. 1e. MAN: for --output json/xml, added pointer to doc page on smxi.org, people being unable to grasp the output is getting tiresome. 1f. MAN: Added synonym for --output, --export. 2a. SMXI.ORG DOCS: added --output json/xml documentation page: https://smxi.org/docs/inxi-json-xml-output.htm - this is also linked to from the github wiki page, though of course nobody is going to read it, as well as from a few pages in smxi.org. 2b. Updated inxi-man,options,changelog.htm files. 3. CHANGELOG: Changed to use same format as acxi.changelog, leading topic id's in upper case, makes it easier to scan read and organize. 4a. DOCS: docs/inxi-cpu.txt - cleaned up, re-arranged a bit, added cpuid data explanation, and updated header on inxi-perl/data/cpu/microarch to better explain the way amd does ext fam / ext model, which are not the same, bizarrrely, very confusing. 4b. DOCS: New: docs/inxi-disks.txt. Split out from inxi-resources.txt, part of the ongoing to documentation modularization, slowly splitting out sub topics from inxi-data.txt and inxi-resources.txt. Note this is in general only done when I'm working on that specific feature. But slowly, surely. -------------------------------------------------------------------------------- CODE: 1. GRAPHICS: Test when no gpu drivers and no dri drivers but x drivers never showed x driver. Was supposed to be all || for tests: if (@$gpu_drivers || $graphics{'dri-drivers'} && @$x_drivers){ https://perldoc.perl.org/perlop. I believe this led to test 1 being false, test 2 being false, and since that left tests 2 and 3 needing to be true for the && logical and to be true. Since only one of the two was true, the last bit was seen as false. 2. GRAPHICS: Connected with 1, noticed that for some weird reason, I'd decided to assign the array ref for drivers like this: @$x_drivers = (a, b, c); when it was supposed to be: $x_drivers = [a,b,c]; This did not cause any issues, since they mean the same thing, but it was silly to write it that way. 3a. DEBUG: Added --debug-arg-use which allows testers to run a specific argument combination that may be causing issues. 3b. DEBUG: Also added more validation, to make sure arg for --debug-arg / --debug-arg-use start with - or -- followed by a letter. 4. START: Removed this code block from set_konvi_data. I had left this in place for a release or two to make sure no need for it was found, but it will never be used since it never worked in the first place. # my $config_cmd = ''; # there's no current kde 5 konvi config tool that we're aware of. Correct if changes. # This part may never have worked, but I don't have legacy data to determine. # The idea was to get inxi.conf files from konvi data stores, but that was never right. # if (main::check_program('kde4-config')){ # $config_cmd = 'kde4-config --path data'; # } # kde5-coinfig never existed, was replaced by $XDG_DATA_HOME in KDE # elsif (main::check_program('kde-config')){ # $config_cmd = 'kde-config --path data'; # } # elsif (main::check_program('qtpaths')){ # $config_cmd = 'qtpaths --paths GenericDataLocation'; # } # The section below is on request of Argonel from the Konversation developer team: # it sources config files like $HOME/.kde/share/apps/konversation/scripts/inxi.conf # if ($config_cmd){ # my @data = main::grabber("$config_cmd 2>/dev/null",':'); # Configs::set(\@data) if @data; # main::log_data('dump',"kde config \@data",\@data) if $b_log; # } 5. OPTIONS: in OptionsHandler::post_process(), reorganized the various run and exit triggers, help, configs, recommends, version, etc. All on top now. |
||
|---|---|---|
| inxi | ||
| inxi.1 | ||
| inxi.changelog | ||
| LICENSE.txt | ||
| README.txt | ||
README for inxi - a command line system information tool The new faster, more powerful Perl inxi is here! File all issue reports with the master branch. All support for versions prior to 3.0 is now ended, sorry. Make sure to update to the current inxi from the master branch before filing any issue reports. The code in pre 2.9 versions literally no longer exists in inxi 3. Bugs from earlier versions cannot usually be solved in the new version since the pre 2.9 and the 2.9 and later versions are completely different internally. -------------------------------------------------------------------------------- DONATE -------------------------------------------------------------------------------- Help support the project with a one time or a sustaining donation. Paypal: https://www.paypal.com/donate/?hosted_button_id=77DQVM6A4L5E2 Open Collective: https://opencollective.com/inxi ================================================================================ DEVELOPMENT AND ISSUES -------------------------------------------------------------------------------- Make inxi better! Expand supported hardware and OS data, fix broken items! -------------------------------------------------------------------------------- HELP PROJECT DEVELOPMENT! SUBMIT A DEBUGGER DATASET -------------------------------------------------------------------------------- This is easy to do, and only takes a few seconds. These datasets really help the project add and debug features. You will generally also be asked to provide this data for non trivial issue reports. Note that the following options are present: 1. Generate local gz'ed debugger dataset. Leaves gz on your system: inxi version >= 3: inxi --debug 20 2. Generate, upload gz'ed debugger dataset. Leaves gz on your system: inxi version >= 3: inxi --debug 21 3. Generate, upload, delete gz'ed debugger dataset: inxi version >= 3: inxi --debug 22 You can run these as regular user, or root/sudo, which will gather a bit more data, like from dmidecode, and other tools that need superuser permissions to run. ARM (plus MIPS, SPARC, PowerPC) and BSD datasets are particularly appreciated because we simply do not have enough of those. -------------------------------------------------------------------------------- FILE AN ISSUE IF YOU FIND SOMETHING MISSING, BROKEN, OR FOR AN ENHANCEMENT -------------------------------------------------------------------------------- inxi strives to support the widest range of operating systems and hardware, from the most simple consumer desktops, to the most advanced professional hardware and servers. The issues you post help maintain or expand that support, and are always appreciated since user data and feedback is what keeps inxi working and supporting the latest (or not so latest) hardware and operating systems. See INXI VERSION/SUPPORT/ISSUES/BUGS INFORMATION for more about issues/support. See BSD/UNIX below for qualifications re BSDs, and OSX in particular. ================================================================================ SOURCE VERSION CONTROL -------------------------------------------------------------------------------- https://github.com/smxi/inxi MAIN BRANCH: master DEVELOPMENT BRANCHES: inxi-perl, one, two inxi-perl is the dev branch, the others are rarely if ever used. inxi itself has the built in feature to be able to update itself from anywhere, including these branches, which is very useful for development and debugging on various user systems. PULL REQUESTS: Please talk to me before starting to work on patches of any reasonable complexity. inxi is hard to work on, and you have to understand how it works before submitting patches, unless it's a trivial bug fix. Please: NEVER even think about looking at or using previous inxi commits, previous to the current master version, as a base for a patch. If you do, your patch / pull request will probably be rejected. Developers, get your version from the inxi-perl branch, pinxi, otherwise you may not be current to actual development versions. inxi-perl pinxi is always equal to or ahead of master branch inxi. Man page updates, doc page updates, etc, of course, are easy and will probably be accepted, as long as they are properly formatted and logically coherent. When under active development, inxi releases early, and releases often. PACKAGERS: inxi has one and only one 'release', and that is the current commit/version in the master branch (plus pinxi inxi-perl branch, of course, but those should never be packaged). -------------------------------------------------------------------------------- MASTER BRANCH -------------------------------------------------------------------------------- This is the only supported branch, and the current latest commit/version is the only supported 'release'. There are no 'releases' of inxi beyond the current commit/version in master. All past versions are not supported. git clone https://github.com/smxi/inxi --branch master --single-branch OR direct fast and easy install: wget -O inxi https://github.com/smxi/inxi/raw/master/inxi OR easy to remember shortcut (which redirects to github): wget -O inxi https://smxi.org/inxi wget -O inxi smxi.org/inxi NOTE: Just because github calls tagged commits 'Releases' does not mean they are releases! I can't change the words on the tag page. They are tagged commits, period. A tag is a pointer to a commit, and has no further meaning. If your distribution has blocked -U self updater and you want a newer version: Open /etc/inxi.conf and change false to true: B_ALLOW_UPDATE=true -------------------------------------------------------------------------------- DEVELOPMENT BRANCH -------------------------------------------------------------------------------- All active development is now done on the inxi-perl branch (pinxi): git clone https://github.com/smxi/inxi --branch inxi-perl --single-branch OR direct fast and easy install: wget -O pinxi https://github.com/smxi/inxi/raw/inxi-perl/pinxi OR easy to remember shortcut (which redirects to github): wget -O pinxi https://smxi.org/pinxi wget -O pinxi smxi.org/pinxi Once new features have been debugged, tested, and are reasonably stable, pinxi is copied to inxi in the master branch. It's a good idea to check with pinxi if you want to make sure your issue has not been corrected, since pinxi is always equal to or ahead of inxi. -------------------------------------------------------------------------------- LEGACY INXI (in inxi-legacy repo) -------------------------------------------------------------------------------- If you'd like to look at the Gawk/Bash version of inxi, you can find it in the inxi-legacy repo, as binxi in the /inxi-legacy directory: Direct fast and easy install: wget -O binxi https://github.com/smxi/inxi-legacy/raw/master/inxi-legacy/binxi OR easy to remember shortcut (which redirects to github): wget -O binxi https://smxi.org/binxi This version will not be maintained, and it's unlikely that any time will be spent on it in the future, but it is there in case it's of use or interest to anyone. This was kept for a long time as the inxi-legacy branch of inxi, but was moved to the inxi-legacy repo 2021-09-24. ================================================================================ SUPPORT INFO -------------------------------------------------------------------------------- Do not ask for basic help that reading the inxi -h / --help menus, or man page would show you, and do not ask for features to be added that inxi already has. Also do not ask for support if your distro won't update its inxi version, some are bad about that. -------------------------------------------------------------------------------- DOCUMENTATION -------------------------------------------------------------------------------- https://smxi.org/docs/inxi.htm (smxi.org/docs/ is easier to remember, and is one click away from inxi.htm). The one page wiki on github is only a pointer to the real resources. https://github.com/smxi/inxi/tree/inxi-perl/docs Contains specific Perl inxi documentation, of interest mostly to developers. Includes internal inxi tools, values, configuration items. Also has useful information about Perl version support, including the list of Core modules that _should_ be included in a distribution's core modules, but which are unfortunately sometimes removed. INXI CONFIGURATION: https://smxi.org/docs/inxi-configuration.htm HTML MAN PAGE: https://smxi.org/docs/inxi-man.htm INXI OPTIONS PAGE: https://smxi.org/docs/inxi-options.htm NOTE: Check the inxi version number on each doc page to see which version will support the options listed. The man and options page also link to a legacy version, pre 2.9. https://github.com/smxi/inxi/wiki This is simply a page with links to actual inxi resources, which can be useful for developers and people with technical questions. No attempt will be made to reproduce those external resources here on github. You'll find stuff like how to export to json/xml there, and basic core philosophies, etc. -------------------------------------------------------------------------------- IRC -------------------------------------------------------------------------------- You can go to: irc.oftc.net or irc.libera.chat channel #smxi but be prepared to wait around for a while to get a response. Generally it's better to use github issues. -------------------------------------------------------------------------------- ISSUES -------------------------------------------------------------------------------- https://github.com/smxi/inxi/issues No issues accepted for non current inxi versions. See below for more on that. Unfortunately as of 2.9, no support or issues can be accepted for older inxi's because inxi 2.9 (Perl) and newer is a full rewrite, and legacy inxi is not being supported since our time here on earth is finite (plus of course, one reason for the rewrite was to never have to work with Gawk->Bash again!). Sys Admin type inxi users always get the first level of support. ie, convince us you run real systems and networks, and your issue shoots to the top of the line. As do any real bugs. Failure to supply requested debugger data will lead To a distinct lack of interest on our part to help you with a bug. ie, saying, oh, it doesn't work, doesn't cut it, unless it's obvious why. -------------------------------------------------------------------------------- SUPPORT FORUMS -------------------------------------------------------------------------------- https://techpatterns.com/forums/forum-33.html This is the best place to place support issues that may be complicated. If you are developer, use: DEVELOPER FORUMS: https://techpatterns.com/forums/forum-32.html ================================================================================ ABOUT INXI -------------------------------------------------------------------------------- inxi is a command line system information tool. It was forked from the ancient and mindbendingly perverse yet ingenius infobash, by locsmif. That was a buggy, impossible to update or maintain piece of software, so the fork fixed those core issues, and made it flexible enough to expand the utility of the original ideas. Locmsif has given his thumbs up to inxi, so don't be fooled by legacy infobash stuff you may see out there. inxi is lower case, except when I create a text header here in a file like this, but it's always lower case. Sometimes to follow convention I will use upper case inxi to start a sentence, but i find it a bad idea since invariably, someone will repeat that and type it in as the command name, then someone will copy that, and complain that the command: Inxi doesn't exist... The primary purpose of inxi is for support, and sys admin use. inxi is used widely for forum and IRC support, which is I believe it's most common function. If you are piping output to paste or post (or writing to file), inxi now automatically turns off color codes, so the inxi 2.3.xx and older suggestion to use -c 0 to turn off colors is no longer required. inxi strives to be as accurate as possible, but some things, like memory/ram data, depend on radically unreliable system self reporting based on OEM filling out data correctly, which doesn't often happen, so in those cases, you want to confirm things like ram capacity with a reputable hardware source, like crucial.com, which has the best ram hardware tool I know of. -------------------------------------------------------------------------------- COMMITMENT TO LONG TERM STABILITY -------------------------------------------------------------------------------- The core mission of inxi is to always work on all systems all the time. Well, all systems with the core tools inxi requires to operate installed. What this means is this: you can have a 10 year old box, or probably 15, not sure, and you can install today's inxi on it, and it will run. It won't run fast, but it will run. I test inxi on a 200 MHz laptop from about 1998 to keep it honest. That's also what was used to optimize the code at some points, since differences appear as seconds, not 10ths or 100ths of seconds on old systems like that. inxi is being written, and tested, on Perl as old as 5.08, and will work on any system that runs Perl 5.08 or later. Pre 2.9.0 Gawk/Bash inxi will also run on any system no matter how old, within reason, so there should be no difference. -------------------------------------------------------------------------------- FEATURES AND FUNCTIONALITY -------------------------------------------------------------------------------- inxi's functionality continues to grow over time, but it's also important to understand that each core new feature usually requires about 30 days work to get it stable. So new features are not trivial things, nor is it acceptable to submit a patch that works only on your personal system. One inxi feature (-s, sensors data), took about 2 hours to get working in the alpha test on the local dev system, but then to handle the massive chaos that is actual user sensors output and system variations, it took several rewrites and about 30 days to get somewhat reliable for about 98% or so of inxi users. So if your patch is rejected, it's likely because you have not thought it through adequately, have not done adequate testing cross system and platform, etc. -------------------------------------------------------------------------------- SUPPORTED VERSIONS / DISTRO VERSIONS -------------------------------------------------------------------------------- Important: the only version of inxi that is supported is the latest current master branch version/commit. No issue reports or bug reports will be accepted for anything other than current master branch. No merges, attempts to patch old code from old versions, will be considered or accepted. If you are not updated to the latest inxi, do not file a bug report since it's probably been fixed ages ago. If your distro isn't packaging a current inxi, then file a bug report with your packager, not here. inxi is 'rolling release' software, just like Debian Sid, Gentoo, or Arch Linux are rolling release GNU/Linux distributions, with no 'release points'. Distributions should never feel any advantage comes from using old inxi versions because inxi has as a core promise to you, the end user, that it will never require new tools to run. New tools may be required for a new feature, but that will always be handled internally by inxi, and will not cause any operational failures. This is a promise, and I will never as long as I run this project violate that core inxi requirement. Old inxi is NOT more stable than current inxi, it's just old, and lacking in bug fixes and features. For pre 2.9 versions, it's also significantly slower, and with fewer features. Your distro not updating inxi ever, then failing to show something that is fixed in current inxi is not a bug, and please do not post it here. File the issue with your distro, not here. Updating inxi in a package pool will NEVER make anything break or fail, period. It has no version based dependencies, just software, like Perl 5.xx, lspci, etc. There is never a valid reason to not update inxi in a package pool of any distro in the world (with one single known exception, the Slackware based Puppy Linux release, which ships without the full Perl language. The Debian based one works fine). -------------------------------------------------------------------------------- SEMANTIC VERSION NUMBERING -------------------------------------------------------------------------------- inxi uses 'semantic' version numbering, where the version numbers actually mean something. The version number follows these guidelines: Using example 3.2.28-6 The first digit(s), "3", is a major version, and almost never changes. Only a huge milestone, or if inxi reaches 3.9.xx, when it will simply move up to 4.0.0 just to keep it clean, would cause a change. The second digit(s), "2", means a new real feature has been added. Not a tweaked existing feature, an actual new feature, which usually also has a new argument option letter attached. The second number goes from 0 to 9, and then rolls over the first after 9. The third, "28", is for everything not covered by 1 and 2, can cover bug fixes, tweaks to existing features to add support for something, full on refactors of existing features, pretty much anything where you want the end user to know that they are not up to date. The third goes from 0 to 99, then rolls over the second. The fourth, "6", is extra information about certain types of inxi updates. I don't usually use this last one in master branch, but you will see it in branches one,two, inxi-perl, inxi-legacy since that is used to confirm remote test system patch version updates. The fourth number, when used, will be alpha-numeric, a common version would be, in say, branch one: 2.2.28-b1-02, in other words: branch 1 patch version 2. In the past, now and then the 4th, or 'patch', number, was used in trunk/master branches of inxi, but I've pretty much stopped doing that because it's confusing. inxi does not use the fiction of date based versioning because that imparts no useful information to the end user, when you look at say, 2.2.28, and you last had 2.2.11, you can know with some certainty that inxi has no major new features, just refactors or expansion of existing logic, enhancements, fine tunings, and bug fixes. And if you see one with 2.3.2, you will know that there is a new feature, almost, but not always, linked to one or more new line output items. Sometimes a the changes in the third number can be quite significant, sometimes it's a one line code or bug fix. A move to a new full version number, like the rewrite of inxi to Perl, would reflect in first version say, 2.9.01, then after a period of testing, where most little glitches are fixed, a move to 3.0.0. These almost never happen. I do not expect for example version 4.0 to ever happen after 3.0 (early 2018), unless so many new features are added that it actually hits 3.9, then it would roll over to 4. ================================================================================ BSD / UNIX -------------------------------------------------------------------------------- BSD support is not as complete as GNU/Linux support due to the fact some of the data simply is not available, or is structured in a way that makes it unique to each BSD, or is difficult to process. This fragmentation makes supporting BSDs far more difficult than it should be in the 21st century. The BSD support in inxi is a slowly evolving process. Evolving in the strict technical sense of evolutionary fitness, following fitness for purpose, that is (like OpenBSD's focus on security and high quality code, for instance), not as in progressing forwards. Features are being added as new data sources and types are discovered, and others are being dropped, as prior data sources degenerate or mutate to a point where trying to deal with them stops being interesting. Once it starts growing evident that a particular branch has hit a dead end and no longer warrants the time required to follow it to its extinction, support will be reduced to basically maintenance mode. In other words, inxi follows this evolutionary process, and does not try to revive dead or dying branches, since that's a waste of time. Note that due to time/practicality constraints, in general, only the original BSD branches will be supported: OpenBSD+derived; FreeBSD+derived; NetBSD+derived (in that order of priority, with a steep curve down from first to last). With the caveat that since it's my time being volunteered here, if the BSD in question has basically no users, or has bad tools, or no usable tools, or inconsistent or unreliable tools, or bad / weak data, or, worst, no actual clear reason to exist, I'm not willing to spend time on it as a general rule. Other UNIX variants will generally only get the work required to make internal BSD flags get set and to remove visible output errors. I am not interested in them at all, zero. They are at this point basically historical artifacts, of interest only to computer museums as far as I'm concerned. -------------------------------------------------------------------------------- TRUE BSDs -------------------------------------------------------------------------------- All BSD issue reports unless trivial and obvious will require 1 of two things: 1. a full --debug 21 data dump so I don't have to spend days trying to get the information I need to resolve the issue, file by painful file, from the issue poster. This is only the start of the process, and realistically requires 2. to complete it. 2. direct SSH access to at least a comparable live BSD version/system, that is, if the issue is on a laptop, access has to be granted to the laptop, or a similar one. Option 2 is far preferred because in terms of my finite time on this planet of ours, the fact is, if I don't have direct (or SSH) access, I can't get much done, and the little I can get done will take 10 to 1000x longer than it should. That's my time spent (and sadly, with BSDs, largely wasted), not yours. I decided I have to adopt this much more strict policy with BSDs after wasting untold hours on trying to get good BSD support, only to see that support break a few years down the road as the data inxi relied on changed structure or syntax, or the tools changed, or whatever else makes the BSDs such a challenge to support. In the end, I realized, the only BSDs that are well supported are ones that I have had direct access to for debugging and testing. I will always accept patches that are well done, if they do not break GNU/Linux, and extend BSD support, or add new BSD features, and follow the internal inxi logic, and aren't too long. inxi sets initial internal flags to identify that it is a BSD system vs a GNU/Linux system, and preloads some data structures for BSD use, so make sure you understand what inxi is doing before you get into it. -------------------------------------------------------------------------------- APPLE CORPORATION OSX -------------------------------------------------------------------------------- Non-free/libre OSX is in my view a BSD in name only. It is the least Unix-like operating system I've ever seen that claims to be a Unix, its tools are mutated, its data randomly and non-standardly organized, and it totally fails to respect the 'spirit' of Unix, even though it might pass some random tests that certify a system as a 'Unix'. If you want me to use my time on OSX features or issues, you have to pay me, because Apple is all about money, not freedom (that's what the 'free' in 'free software' is referring to, not cost), and I'm not donating my finite time in support of non-free operating systems, particularly not one with a market capitalization hovering around 1 trillion dollars, with usually well north of 100 billion dollars in liquid assetts. ================================================================================ MICROSOFT CORPORATION WINDOWS -------------------------------------------------------------------------------- To be quite clear, support for Windows will never happen, I don't care about Windows, and don't want to waste a second of my time on it. I also don't care about cygwin issues, beyond maybe hyper basic issues that can be handled with a line or two of code. inxi isn't going to ruin itself by trying to handle the silly Microsoft path separator \, and obviously there's zero chance of my trying to support PowerShell or whatever else they come up with. While I would consider doing Apple stuff if you paid my hourly full market rates, in advance, I would not consider touching Windows for any amount of money. My best advice there is, fork inxi, and do it yourself if you want it. You'll soon run screaming from the project however, once you realize what a nightmare you've stepped into. If you are interested in something like inxi for Windows, I suggest, rather than forking inxi, you just start out from scratch, and build the features up one by one, that will lead to much better code. ### EOF ###