When `editor: format selections` get invoked, the Prettier and external
formatter branches in `format_buffer_locally` ignored the selection
ranges entirely, causing the whole document to be formatted.
- Thread selection ranges as UTF-16 offsets through to Prettier via
`rangeStart/rangeEnd` options in the format request.
- Skip external formatters when ranges are present, since they have no
mechanism for range formatting.
- Create diff edits and apply them for JSON-like languages. For
single-expression languages like JSON, it wasn't respecting the range
commands from Prettier. So, filter the diff edits returned by Prettier
to retain only those overlapping with the user's selection byte ranges,
ensuring changes outside the selection are never applied.
Part of #25796
Before you mark this PR as ready for review, make sure that you have:
- [x] Added a solid test coverage and/or screenshots from doing manual
testing
- [x] Done a self-review taking into account security and performance
aspects
- [x] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- Fixed FormatSelections to only format selected ranges, not the entire
document where prettier is supported.
Current Behaviour:
[original
behaviour.webm](https://github.com/user-attachments/assets/d5f0cb48-4c3f-44aa-89a9-975f31fce92d)
New Behaviour:
[new
behaviour.webm](https://github.com/user-attachments/assets/41e04b90-f37f-43e1-b8ed-4622684454b1)
---------
Signed-off-by: Pratik Karki <pratik@prertik.com>
Many editors such as vim and emacs support "modelines", a comment at the
beginning of the file that allows the file type to be explicitly
specified along with per-file specific settings
- The amount of configurations, style and settings mapping cannot be
handled in one go, so this opens up a lot of potential improvements.
- I left out the possiblity to have "zed" specific modelines for now,
but this could be potentially interesting.
- Mapping the mode or filetype to zed language names isn't obvious
either. We may want to make it configurable.
This is my first contribution to zed, be kind. I struggled a bit to find
the right place to add those settings. I use a similar approach as done
with editorconfig (merge_with_editorconfig). There might be better ways.
Closes#4762
Release Notes:
- Add basic emacs/vim modeline support.
Supersedes #41899, changes:
- limit reading to the first and last 1kb
- add documentation
- more variables handled
- add Arc around ModelineSettings to avoid extra cloning
- changed the way mode -> language mapping is done, thanks to
`modeline_aliases` language config
- drop vim ex: support
- made "Local Variables:" handling a separate commit, so we can drop it
easily
- various code style improvements
---------
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Fixes#36818
Release Notes:
- Added new `global_lsp_settings.request_timeout` setting to configure
the maximum timeout duration for LSP-related operations.
Code inspired by [prior
implementation](https://github.com/zed-industries/zed/pull/38443),
though with a few tweaks here & there (like using `serde:default` and
keeping the pre-defined constant in the LSP file).
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Part of #7450
Big thanks to @macmv for pushing this forwards so much!
Rebased version of https://github.com/zed-industries/zed/pull/39539 as
working on an in-org branch simplifies a lot of things for us)
Release Notes:
- Added LSP semantic tokens highlighting support
---------
Co-authored-by: Neil Macneale V <neil.macneale.v@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
Many editors such as vim and emacs support "modelines", a comment at the
beginning of the file that allows the file type to be explicitly
specified along with per-file specific settings
- The amount of configurations, style and settings mapping cannot be
handled in one go, so this opens up a lot of potential improvements.
- I left out the possiblity to have "zed" specific modelines for now,
but this could be potentially interesting.
- Mapping the mode or filetype to zed language names isn't obvious
either. We may want to make it configurable.
This is my first contribution to zed, be kind. I struggled a bit to find
the right place to add those settings. I use a similar approach as done
with editorconfig (merge_with_editorconfig). There might be better ways.
Closes#4762
Release Notes:
- Add basic emacs/vim modeline support.
Supersedes #41899, changes:
- limit reading to the first and last 1kb
- add documentation
- more variables handled
- add Arc around ModelineSettings to avoid extra cloning
- changed the way mode -> language mapping is done, thanks to
`modeline_aliases` language config
- drop vim ex: support
- made "Local Variables:" handling a separate commit, so we can drop it
easily
- various code style improvements
---------
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Co-authored-by: Claude <noreply@anthropic.com>
Co-authored-by: Conrad Irwin <conrad.irwin@gmail.com>
Closes https://github.com/zed-industries/zed/issues/39056
Leverages a new `await_on_background` API that spawns the future on the
background but blocks the current task, allowing to borrow from the
surrounding scope.
Release Notes:
- N/A *or* Added/Fixed/Improved ...
Set `prettier_parser` explicitly if the file extension for the buffer
does not match a known one for the current language
Release Notes:
- N/A
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
We've been considering removing workspace-hack for a couple reasons:
- Lukas ran into a situation where its build script seemed to be causing
spurious rebuilds. This seems more likely to be a cargo bug than an
issue with workspace-hack itself (given that it has an empty build
script), but we don't necessarily want to take the time to hunt that
down right now.
- Marshall mentioned hakari interacts poorly with automated crate
updates (in our case provided by rennovate) because you'd need to have
`cargo hakari generate && cargo hakari manage-deps` after their changes
and we prefer to not have actions that make commits.
Currently removing workspace-hack causes our workspace to grow from
~1700 to ~2000 crates being built (depending on platform), which is
mainly a problem when you're building the whole workspace or running
tests across the the normal and remote binaries (which is where
feature-unification nets us the most sharing). It doesn't impact
incremental times noticeably when you're just iterating on `-p zed`, and
we'll hopefully get these savings back in the future when
rust-lang/cargo#14774 (which re-implements the functionality of hakari)
is finished.
Release Notes:
- N/A
Closes https://github.com/zed-industries/zed/issues/38690Closes#37353
### Background
On Windows, paths are normally separated by `\`, unlike mac and linux
where they are separated by `/`. When editing code in a project that
uses a different path style than your local system (e.g. remoting from
Windows to Linux, using WSL, and collaboration between windows and unix
users), the correct separator for a path may differ from the "native"
separator.
Previously, to work around this, Zed converted paths' separators in
numerous places. This was applied to both absolute and relative paths,
leading to incorrect conversions in some cases.
### Solution
Many code paths in Zed use paths that are *relative* to either a
worktree root or a git repository. This PR introduces a dedicated type
for these paths called `RelPath`, which stores the path in the same way
regardless of host platform, and offers `Path`-like manipulation APIs.
RelPath supports *displaying* the path using either separator, so that
we can display paths in a style that is determined at runtime based on
the current project.
The representation of absolute paths is left untouched, for now.
Absolute paths are different from relative paths because (except in
contexts where we know that the path refers to the local filesystem)
they should generally be treated as opaque strings. Currently we use a
mix of types for these paths (std::path::Path, String, SanitizedPath).
Release Notes:
- N/A
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Peter Tripp <petertripp@gmail.com>
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
Co-authored-by: Lukas Wirth <me@lukaswirth.dev>
Follow-up of https://github.com/zed-industries/zed/pull/33417
* adjust prettier mock LSP to handle `shutdown` and `exit` messages
* removed another `?.log_err()` backtrace from logs and improved the
logging info
* always handle the last parts of the shutdown logic even if the
shutdown response had failed
Release Notes:
- N/A
Improves the prettier config file detection by adding missing entries
that are allowed per the docs: https://prettier.io/docs/configuration
Release Notes:
- Improved Prettier config file detection
Closes [#13107](https://github.com/zed-industries/zed/issues/13107)
Enabled pull diagnostics by default, for the language servers that
declare support in the corresponding capabilities.
```
"diagnostics": {
"lsp_pull_diagnostics_debounce_ms": null
}
```
settings can be used to disable the pulling.
Release Notes:
- Added support for the LSP `textDocument/diagnostic` command.
# Brief
This is draft PR that implements the LSP `textDocument/diagnostic`
command. The goal is to receive your feedback and establish further
steps towards fully implementing this command. I tried to re-use
existing method and structures to ensure:
1. The existing functionality works as before
2. There is no interference between the diagnostics sent by a server and
the diagnostics requested by a client.
The current implementation is done via a new LSP command
`GetDocumentDiagnostics` that is sent when a buffer is saved and when a
buffer is edited. There is a new method called `pull_diagnostic` that is
called for such events. It has debounce to ensure we don't spam a server
with commands every time the buffer is edited. Probably, we don't need
the debounce when the buffer is saved.
All in all, the goal is basically to get your feedback and ensure I am
on the right track. Thanks!
## References
1.
https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#textDocument_pullDiagnostics
## In action
You can clone any Ruby repo since the `ruby-lsp` supports the pull
diagnostics only.
Steps to reproduce:
1. Clone this repo https://github.com/vitallium/stimulus-lsp-error-zed
2. Install Ruby (via `asdf` or `mise).
4. Install Ruby gems via `bundle install`
5. Install Ruby LSP with `gem install ruby-lsp`
6. Check out this PR and build Zed
7. Open any file and start editing to see diagnostics in realtime.
https://github.com/user-attachments/assets/0ef6ec41-e4fa-4539-8f2c-6be0d8be4129
---------
Co-authored-by: Kirill Bulatov <mail4score@gmail.com>
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Closes: https://github.com/rzukic/zed-latex/issues/77
## Default formatter: `latexindent`
Before, formatting was delegated to the language server, which just ran
a `latexindent` executable. There was no benefit to running it through
the language server over running it as an "external" formatter in zed.
In fact this was an issue because there was no way to provide an
explicit path for the executable (causing above extension issue). Having
the default settings configure the formatter directly gives more control
to user and removes the number of indirections making it clearer how to
tweak things like the executable path, or extra CLI args, etc...
## Alternative: `prettier`
Default settings have also been added to allow prettier as the formatter
(by just setting `"formatter": "prettier"` in the "LaTeX" language
settings). This was not possible before because an extra line needed to
be added to the `prettier` crate (similarly to what was done for
https://github.com/zed-industries/zed/issues/19024) to find the plugin
correctly.
> [!NOTE]
> The `prettier-plugin-latex` node module also contained a
`dist/standalone.js` but using that instead of
`dist/prettier-plugin-latex.js` gave an error, and indeed the latter
worked as intended (along with its questionable choices for formatting).
Release Notes:
- LaTeX: added default `latexindent` formatter settings without relying
on `texlab`, as well as allowing `prettier` to be chosen for formatting
---------
Co-authored-by: Peter Tripp <peter@zed.dev>
https://github.com/zed-industries/zed/issues/30972 brought up another
case where our context is not enough to track the actual source of the
issue: we get a general top-level error without inner error.
The reason for this was `.ok_or_else(|| anyhow!("failed to read HEAD
SHA"))?; ` on the top level.
The PR finally reworks the way we use anyhow to reduce such issues (or
at least make it simpler to bubble them up later in a fix).
On top of that, uses a few more anyhow methods for better readability.
* `.ok_or_else(|| anyhow!("..."))`, `map_err` and other similar error
conversion/option reporting cases are replaced with `context` and
`with_context` calls
* in addition to that, various `anyhow!("failed to do ...")` are
stripped with `.context("Doing ...")` messages instead to remove the
parasitic `failed to` text
* `anyhow::ensure!` is used instead of `if ... { return Err(...); }`
calls
* `anyhow::bail!` is used instead of `return Err(anyhow!(...));`
Release Notes:
- N/A
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This is the core change:
https://github.com/zed-industries/zed/pull/26758/files#diff-044302c0d57147af17e68a0009fee3e8dcdfb4f32c27a915e70cfa80e987f765R1052
TODO:
- [x] Use AsyncFn instead of Fn() -> Future in GPUI spawn methods
- [x] Implement it in the whole app
- [x] Implement it in the debugger
- [x] Glance at the RPC crate, and see if those box future methods can
be switched over. Answer: It can't directly, as you can't make an
AsyncFn* into a trait object. There's ways around that, but they're all
more complex than just keeping the code as is.
- [ ] Fix platform specific code
Release Notes:
- N/A
Fix a bug where a GPUI macro still used `ModelContext`
Rename `AsyncAppContext` -> `AsyncApp`
Rename update_model, read_model, insert_model, and reserve_model to
update_entity, read_entity, insert_entity, and reserve_entity
Release Notes:
- N/A
There's still a bit more work to do on this, but this PR is compiling
(with warnings) after eliminating the key types. When the tasks below
are complete, this will be the new narrative for GPUI:
- `Entity<T>` - This replaces `View<T>`/`Model<T>`. It represents a unit
of state, and if `T` implements `Render`, then `Entity<T>` implements
`Element`.
- `&mut App` This replaces `AppContext` and represents the app.
- `&mut Context<T>` This replaces `ModelContext` and derefs to `App`. It
is provided by the framework when updating an entity.
- `&mut Window` Broken out of `&mut WindowContext` which no longer
exists. Every method that once took `&mut WindowContext` now takes `&mut
Window, &mut App` and every method that took `&mut ViewContext<T>` now
takes `&mut Window, &mut Context<T>`
Not pictured here are the two other failed attempts. It's been quite a
month!
Tasks:
- [x] Remove `View`, `ViewContext`, `WindowContext` and thread through
`Window`
- [x] [@cole-miller @mikayla-maki] Redraw window when entities change
- [x] [@cole-miller @mikayla-maki] Get examples and Zed running
- [x] [@cole-miller @mikayla-maki] Fix Zed rendering
- [x] [@mikayla-maki] Fix todo! macros and comments
- [x] Fix a bug where the editor would not be redrawn because of view
caching
- [x] remove publicness window.notify() and replace with
`AppContext::notify`
- [x] remove `observe_new_window_models`, replace with
`observe_new_models` with an optional window
- [x] Fix a bug where the project panel would not be redrawn because of
the wrong refresh() call being used
- [x] Fix the tests
- [x] Fix warnings by eliminating `Window` params or using `_`
- [x] Fix conflicts
- [x] Simplify generic code where possible
- [x] Rename types
- [ ] Update docs
### issues post merge
- [x] Issues switching between normal and insert mode
- [x] Assistant re-rendering failure
- [x] Vim test failures
- [x] Mac build issue
Release Notes:
- N/A
---------
Co-authored-by: Antonio Scandurra <me@as-cii.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Joseph <joseph@zed.dev>
Co-authored-by: max <max@zed.dev>
Co-authored-by: Michael Sloan <michael@zed.dev>
Co-authored-by: Mikayla Maki <mikaylamaki@Mikaylas-MacBook-Pro.local>
Co-authored-by: Mikayla <mikayla.c.maki@gmail.com>
Co-authored-by: joão <joao@zed.dev>
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint workspaceFolders on language server side OR spawn
multiple instances of a single language server (which will be the case
with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally project nesting is not allowed within the scope of
a single LspAdapter.
Closes https://github.com/zed-industries/zed/issues/5108
Re-lands #22182 which I had to revert due to merging it into todays
Preview.
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
This PR introduces a new entity called Project Tree which is responsible
for finding subprojects within a worktree;
a subproject is a language-specific subset of a worktree which should be
accurately tracked on the language server side. We'll have an ability to
set multiple disjoint `workspaceFolder`s on language server side OR
spawn multiple instances of a single language server (which will be the
case with e.g. Python language servers, as they need to interact with
multiple disjoint virtual environments).
Project Tree assumes that projects of the same LspAdapter kind cannot
overlap. Additionally **project nesting** is not allowed within the
scope of a single LspAdapter.
Closes#5108
Release Notes:
- Language servers now track their working directory more accurately.
---------
Co-authored-by: João <joao@zed.dev>
Closes#11115
**Context**:
Consider a monorepo setup like this: the root has Prettier installed,
but the individual monorepos do not. In this case, only one Prettier
instance is used, with its installation located at the root. The
monorepos also use this same instance for formatting.
However, monorepo can have its own `.prettierignore` file, which will
take precedence over the `.prettierignore` file at the root level (if
one exists) for files in that monorepo.
<img
src="https://github.com/user-attachments/assets/742f16ac-11ad-4d2f-a5a2-696e47a617b9"
alt="prettier" width="200px" />
**Implementation**:
From the context above, we should keep ignore dir decoupled from the
Prettier instance. This means that even if the project has only one
Prettier installation (and thus a single Prettier instance), there can
still be multiple `.prettierignore` in play.
This approach also allows us to respect `.prettierignore` even when the
project does not have Prettier installed locally and instead relies on
the editor’s Prettier instance.
**Tests**:
1. No Prettier in project, using editor Prettier: Ensures
`.prettierignore` is respected even without a local Prettier
installation.
2. Monorepo with root Prettier and child `.prettierignore`: Confirms
that the child project’s ignore file is correctly used.
3. Monorepo with root and child `.prettierignore` files: Verifies the
child ignore file takes precedence over the root’s.
Release Notes:
- Added `.prettierignore` support to the Prettier integration.
This fixes the issue of multiple language servers showing up as `node`
in the language server logs dropdown.
It does this by changing `language_server.name()` to return the
adapter's name, not the binary name, and changing types to make sure
that we always use this.
Release Notes:
- Fixed language server names showing up only as `"node"`
---------
Co-authored-by: Sam Rose <hello@samwho.dev>
Co-authored-by: Bennet <bennet@zed.dev>
Fixed the bug when shared ssh project did not account for client
changing things in their buffers.
Also ensures Prettier formatting workflow works for both ssh project
owner and ssh project clients.
Release Notes:
- N/A
---------
Co-authored-by: Conrad Irwin <conrad@zed.dev>
Closes https://github.com/zed-industries/zed/issues/8534
Supersedes https://github.com/zed-industries/zed/pull/16349
Potential concerns:
* we do not follow up to the `/` when looking for `.editorconfig`, only
up to the worktree root.
Seems fine for most of the cases, and the rest should be solved
generically later, as the same issue exists for settings.json
* `fn language` in `AllLanguageSettings` is very hot, called very
frequently during rendering. We accumulate and parse all `.editorconfig`
file contents beforehand, but have to go over globs and match these
against the path given + merge the properties still.
This does not seem to be very bad, but needs more testing and
potentially some extra caching.
Release Notes:
- Added .editorconfig support
---------
Co-authored-by: Ulysse Buonomo <buonomo.ulysse@gmail.com>
Release Notes:
- (Potentially breaking change) Zed will now use the node installed on
your $PATH (if it is more recent than v18) instead of downloading its
own. You can disable the new behavior with `{"node":
{"disable_path_lookup": true}}` in your settings. We do not yet use
system/project-local node_modules.
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Do not require the `prettier` dependency name to be in package.json's
[dev]Dependencies, instead just checking the `node_modules` contents.
Release Notes:
- Improved `prettier` detection to pick up its installation from
transitive dependencies
([12731](https://github.com/zed-industries/zed/issues/12731)
