Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Adds `editor: convert to base64` and `editor: convert from base64` to
the command palette. Both commands operate on the current selection, or
the word under the cursor when nothing is selected. The decode command
silently no-ops on invalid base64 input or non-UTF-8 decoded bytes,
consistent with how other convert commands handle untransformable input.
Release Notes:
- Added `editor: convert to base64` and `editor: convert from base64`
commands to the command palette
---------
Co-authored-by: Christopher Biscardi <chris@christopherbiscardi.com>
Self-Review Checklist:
- [x] I've reviewed my own diff for quality, security, and reliability
- [x] Unsafe blocks (if any) have justifying comments
- [x] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [x] Tests cover the new/changed behavior
- [x] Performance impact has been considered and is acceptable
Closes#54737.
#48752 added empty-prefix `block_comment` entries to several language
configs (Go, C, C++, JSONC, Python, JSX inner) to support the new
toggle-block-comments action.
In `Editor::rewrap_impl`, the comment-format matcher used
`buffer.contains_str_at(indent_end, &config.prefix)` to decide whether
the current line is a continuation of a block comment. When the language
is configured with an empty prefix, this is true on every line. `//`
(and `#`) line comments inside a `comment` override scope were
classified as `BlockLine("")` and never reached the line-comment
fallback. The result was that the line-comment prefix was not stripped
before wrapping and not re-prepended after, embedding `//` markers as
text in the wrapped paragraph.
Skip the BlockLine arm when the configured prefix is empty so the
matcher falls through to `line_comment_prefixes`.
I've included regression tests for both golang (which adds a new
treesitter dep to the editor package) and C/C++.
Release Notes:
- Fixed line comment rewrapping in golang and C/C++
Self-Review Checklist:
- [ ] I've reviewed my own diff for quality, security, and reliability
- [ ] Unsafe blocks (if any) have justifying comments
- [ ] The content is consistent with the [UI/UX
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
- [ ] Tests cover the new/changed behavior
- [ ] Performance impact has been considered and is acceptable
Closes #ISSUE
Release Notes:
- N/A
This will help with test times (in some cases), as nextest cannot figure
out whether a given rdep is actually an alive edge of the build graph
Closes #ISSUE
Before you mark this PR as ready for review, make sure that you have:
- [ ] Added a solid test coverage and/or screenshots from doing manual
testing
- [ ] Done a self-review taking into account security and performance
aspects
- [ ] Aligned any UI changes with the [UI
checklist](https://github.com/zed-industries/zed/blob/main/CONTRIBUTING.md#uiux-checklist)
Release Notes:
- N/A
- **build: remove assistant_slash_commands dependency in
assistant_text_thread**
- **diagnostics: Do not depend on search**
- **Remove terminal_view's dependency on search**
- **sever breadcrumbs <-> editor dep (for the sake of terminal_view)**
Release Notes:
- N/A
- **title_bar: Extract platform_title_bar from title_bar**
- **file_finder no longer depends on search and agent_servers no longer
depend on language_models**
Release Notes:
- N/A
---------
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
This PR implements a UI for the side-by-side diff, using blocks to align
the two sides and adding a coherent `SplitEditorElement`.
Release Notes:
- N/A
---------
Co-authored-by: cameron <cameron.studdstreet@gmail.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Zed Zippy <234243425+zed-zippy[bot]@users.noreply.github.com>
Tracing code is not included in normal release builds
Documents how to use them in our performance docs
Only the maps and cursors are instrumented atm
# Compile times:
current main: fresh release build (cargo clean then build --release)
377.34 secs
current main: fresh debug build (cargo clean then build )
89.31 secs
tracing tracy: fresh release build (cargo clean then build --release)
374.84 secs
tracing tracy: fresh debug build (cargo clean then build )
88.95 secs
tracing tracy: fresh release build with timings (cargo clean then build
--release --features tracing)
375.77 secs
tracing tracy: fresh debug build with timings (cargo clean then build
--features tracing)
90.03 secs
Release Notes:
- N/A
---------
Co-authored-by: localcc <work@localcc.cc>
Closes#40757
## Summary
This PR addresses an issue where Zed incorrectly adjusts the indentation
of Markdown lists when inserting text using multiple cursors. Currently:
- Editing individual lines with a single cursor behaves correctly (no
unwanted indentation changes).
- Using multiple cursors, Zed automatically adjusts the indentation,
unlike VS Code, which preserves the existing formatting.
## Tasks
- [x] Implement a new test to verify correct Markdown indentation
behavior with multiple cursors.
- [x] Apply the fix to prevent Zed from adjusting indentation when
inserting text on multiple cursors.
------------------------
Release Notes:
- Fixed an issue where inserting text with multiple cursors inside a
nested Markdown list would cause it to lose its indentation.
---------
Co-authored-by: Smit Barmase <heysmitbarmase@gmail.com>
This simplifies some code and is also more correct in some others (I
believe some of these might've overflowed causing panics in sentry)
Release Notes:
- N/A *or* Added/Fixed/Improved ...
We've been considering removing workspace-hack for a couple reasons:
- Lukas ran into a situation where its build script seemed to be causing
spurious rebuilds. This seems more likely to be a cargo bug than an
issue with workspace-hack itself (given that it has an empty build
script), but we don't necessarily want to take the time to hunt that
down right now.
- Marshall mentioned hakari interacts poorly with automated crate
updates (in our case provided by rennovate) because you'd need to have
`cargo hakari generate && cargo hakari manage-deps` after their changes
and we prefer to not have actions that make commits.
Currently removing workspace-hack causes our workspace to grow from
~1700 to ~2000 crates being built (depending on platform), which is
mainly a problem when you're building the whole workspace or running
tests across the the normal and remote binaries (which is where
feature-unification nets us the most sharing). It doesn't impact
incremental times noticeably when you're just iterating on `-p zed`, and
we'll hopefully get these savings back in the future when
rust-lang/cargo#14774 (which re-implements the functionality of hakari)
is finished.
Release Notes:
- N/A
In the settings refactor I'd assumed server settings were like project
settings. This is not the case, they are in fact the normal user
settings;
but just read from the server.
Release Notes:
- N/A
## Context
While looking into: #32051 and #16120 with instruments, I noticed that
`TabSnapshot::to_tab_point` and `TabSnapshot::to_fold_point` are a
common bottleneck between the two issues. This PR takes the first steps
into closing the stated issues by improving the performance of both
those functions.
### Method
`to_tab_point` and `to_fold_point` iterate through each character in
their rows to find tab characters and translate those characters into
their respective transformations. This PR changes this iteration to take
advantage of the tab character bitmap in the `Rope` data structure and
goes directly to each tab character when iterating.
The tab bitmap is now passed from each layer in-between the `Rope` to
the `TabMap`.
### Testing
I added several randomized tests to ensure that the new `to_tab_point`
and `to_fold_point` functions have the same behavior as the old methods
they're replacing. I also added `test_random_chunk_bitmap` on each layer
the tab bitmap is passed up to the `TabMap` to make sure that the bitmap
being passed is transformed correctly between the layers of
`DisplayMap`.
`test_random_chunk_bitmap` was added to these layers:
- buffer
- multi buffer
- custom_highlights
- inlay_map
- fold_map
## Benchmarking
I setup benchmarks with criterion that is runnable via `cargo bench -p
editor --profile=release-fast`. When benchmarking I had my laptop
plugged in and did so from the terminal with a minimal amount of
processes running. I'm also on a m4 max
### Results
#### To Tab Point
Went from completing 6.8M iterations in 5s with an average time of
`736.13 ns` to `683.38 ns` which is a `-7.1875%` improvement
#### To Fold Point
Went from completing 6.8M iterations in 5s with an average time of
`736.55 ns` to `682.40 ns` which is a `-7.1659%` improvement
#### Editor render
Went from having an average render time of `62.561 µs` to `57.216 µs`
which is a `-8.8248%` improvement
#### Build Buffer with one long line
Went from having an average buffer build time of `3.2549 ms` to `3.2635
ms` which is a `+0.2151%` regression within the margin of error
#### Editor with 1000 multi cursor input
Went from having an average edit time of `133.05 ms` to `122.96 ms`
which is a `-7.5776%` improvement
Release Notes:
- N/A
---------
Co-authored-by: Remco Smits <djsmits12@gmail.com>
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Enables LSP log tracing in both remote collab and remote ssh
environments.
Server logs and server RPC traces can now be viewed remotely, and the
LSP button is now shown in such projects too.
Closes https://github.com/zed-industries/zed/issues/28557
Co-Authored-By: Kirill <kirill@zed.dev>
Co-Authored-By: Lukas <lukas@zed.dev>
Release Notes:
- Enabled LSP log tracing in both remote collab and remote ssh
environments
---------
Co-authored-by: Kirill Bulatov <kirill@zed.dev>
Co-authored-by: Lukas Wirth <lukas@zed.dev>
As reported [in
Discord](https://discord.com/channels/869392257814519848/1106226198494859355/1398470747227426948)
C projects with `"` as "brackets" that autoclose, may invoke panics when
edited at the end of the file.
With a single selection-caret (`ˇ`), at the end of the file,
```c
ifndef BAR_H
#define BAR_H
#include <stdbool.h>
int fn_branch(bool do_branch1, bool do_branch2);
#endif // BAR_H
#include"ˇ"
```
gets an LSP response from clangd
```jsonc
{
"filterText": "AGL/",
"insertText": "AGL/",
"insertTextFormat": 1,
"kind": 17,
"label": " AGL/",
"labelDetails": {},
"score": 0.78725427389144897,
"sortText": "40b67681AGL/",
"textEdit": {
"newText": "AGL/",
"range": { "end": { "character": 11, "line": 8 }, "start": { "character": 10, "line": 8 } }
}
}
```
which replaces `"` after the caret (character/column 11, 0-indexed).
This is reasonable, as regular follow-up (proposed in further
completions), is a suffix + a closing `"`:
<img width="842" height="259" alt="image"
src="https://github.com/user-attachments/assets/ea56f621-7008-4ce2-99ba-87344ddf33d2"
/>
Yet when Zed handles user input of `"`, it panics due to multiple
reasons:
* after applying any snippet text edit, Zed did a selection change:
5537987630/crates/editor/src/editor.rs (L9539-L9545)
which caused eventual autoclose region invalidation:
5537987630/crates/editor/src/editor.rs (L2970)
This covers all cases that insert the `include""` text.
* after applying any user input and "plain" text edit, Zed did not
invalidate any autoclose regions at all, relying on the "bracket" (which
includes `"`) autoclose logic to rule edge cases out
* bracket autoclose logic detects previous `"` and considers the new
user input as a valid closure, hence no autoclose region needed.
But there is an autoclose bracket data after the plaintext completion
insertion (`AGL/`) really, and it's not invalidated after `"` handling
* in addition to that, `Anchor::is_valid` method in `text` panicked, and
required `fn try_fragment_id_for_anchor` to handle "pointing at odd,
after the end of the file, offset" cases as `false`
A test reproducing the feedback and 2 fixes added: proper, autoclose
region invalidation call which required the invalidation logic tweaked a
bit, and "superficial", "do not apply bad selections that cause panics"
fix in the editor to be more robust
Release Notes:
- Fixed panic with completion ranges and autoclose regions interop
---------
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
Closes#34390
This PR fixes several Bash indentation issues:
- Adding indentation or comment using multi cursors no longer breaks
relative indentation
- Adding newline now places the cursor at the correct indent
- Typing a valid keyword triggers context-aware auto outdent
It also adds tests for all of them.
Release Notes:
- Fixed various issues with handling indentation in Bash.
Closes#33761
The problem was that in the indentation regex we were treating lines
that had `:` in them as requiring an indent on the next line, even if
that `:` was inside a comment.
Release Notes:
- Fixed YAML indentation for lines containing comments with `:` in them
Closes#19644#18151
Now, rewrapping markdown lists (unordered, ordered, and to-do lists) and
block quotes wrap them separately, without merging them together.
Additionally, it correctly indents subsequent lines.
With this input:
```md
1. This is a list item that is short.
2. This list item is a bit longer because I want to see if it wraps correctly after a rewrap operation in Zed. What do you think?
3. another short item
```
Output would be:
```md
1. This is a list item that is short.
2. This list item is a bit longer because I want to see if it wraps correctly
after a rewrap operation in Zed. What do you think?
3. another short item
```
Instead of:
```md
1. This is a list item that is short. 2. This list item is a bit longer because
I want to see if it wraps correctly after a rewrap operation in Zed. What
do you think? 3. another short item
```
Release Notes:
- Improved rewrap for markdown lists, todos, and block quotes.
As part of this I refactored the logic that enabled/disabled actions in
the debugger to happen at action registration time instead of using
command palette filters. This allows the menu to grey out actions correctly.
Release Notes:
- Add a "Run" menu to contain tasks and debugger
* stopped fetching LSP tasks for too long (but still use the hardcoded
value for the time being — the LSP tasks settings part is a simple bool
key and it's not very simple to fit in another value there)
* introduced `prefer_lsp` language task settings value, to control
whether in the gutter/modal/both/none LSP tasks are shown exclusively,
if possible
Release Notes:
- Added a way to prefer LSP tasks over Zed tasks
Don't hard wrap interactively; instead, soft wrap in `Bounded` mode
(editor width or 72 chars, whichever is smaller), and then hard wrap
before sending the commit message to git.
This also makes the soft wrap mode and width for commit messages
configurable in language settings.
Previously we didn't support soft wrap modes other than `EditorWidth` in
auto-height editors; I tried to add support for this by analogy with
code that was already there, and it seems to work pretty well.
Closes#27508
Release Notes:
- Fixed confusing wrapping behavior in commit message editors.
This includes the following data:
- Where we spawned the session from (gutter, scenario list, custom form
filled by the user)
- Which debug adapter was used
- Which dock the debugger is in
Closes #ISSUE
Release Notes:
- debugger: Added telemetry for new session experience that includes
data about:
- How a session was spawned (gutter, scenario list or custom form)
- Which debug adapter was used
- Which dock the debugger is in
---------
Co-authored-by: Joseph T. Lyons <JosephTLyons@gmail.com>
## Summary
### Actions
This PR implements actions that allow a user to "run to cursor" and
"evaluate selected text" while there's an active debug session and
exposes the functionality to the UI as well.
- Run to cursor: Can be accessed by right clicking on the gutter
- Evaluate selected text: Can be accessed by selecting text then right
clicking in the editor
### Bug fixes
I also fixed these bugs as well
- Panic when using debugger: Stop action
- Debugger actions command palette filter not working properly in all
cases
- We stopped displaying the correct label in the session's context menu
when a session was terminated
Release Notes:
- N/A
---------
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Remco Smits <djsmits12@gmail.com>
This adds a "workspace-hack" crate, see
[mozilla's](https://hg.mozilla.org/mozilla-central/file/3a265fdc9f33e5946f0ca0a04af73acd7e6d1a39/build/workspace-hack/Cargo.toml#l7)
for a concise explanation of why this is useful. For us in practice this
means that if I were to run all the tests (`cargo nextest r
--workspace`) and then `cargo r`, all the deps from the previous cargo
command will be reused. Before this PR it would rebuild many deps due to
resolving different sets of features for them. For me this frequently
caused long rebuilds when things "should" already be cached.
To avoid manually maintaining our workspace-hack crate, we will use
[cargo hakari](https://docs.rs/cargo-hakari) to update the build files
when there's a necessary change. I've added a step to CI that checks
whether the workspace-hack crate is up to date, and instructs you to
re-run `script/update-workspace-hack` when it fails.
Finally, to make sure that people can still depend on crates in our
workspace without pulling in all the workspace deps, we use a `[patch]`
section following [hakari's
instructions](https://docs.rs/cargo-hakari/0.9.36/cargo_hakari/patch_directive/index.html)
One possible followup task would be making guppy use our
`rust-toolchain.toml` instead of having to duplicate that list in its
config, I opened an issue for that upstream: guppy-rs/guppy#481.
TODO:
- [x] Fix the extension test failure
- [x] Ensure the dev dependencies aren't being unified by Hakari into
the main dependencies
- [x] Ensure that the remote-server binary continues to not depend on
LibSSL
Release Notes:
- N/A
---------
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Mikayla Maki <mikayla.c.maki@gmail.com>
This PR adds functionality for loading the diff for an arbitrary git
commit, and displaying it in a tab. To retrieve the diff for the commit,
I'm using a single `git cat-file --batch` invocation to efficiently load
both the old and new versions of each file that was changed in the
commit.
Todo
* Features
* [x] Open the commit view when clicking the most recent commit message
in the commit panel
* [x] Open the commit view when clicking a SHA in a git blame column
* [x] Open the commit view when clicking a SHA in a commit tooltip
* [x] Make it work over RPC
* [x] Allow buffer search in commit view
* [x] Command palette action to open the commit for the current blame
line
* Styling
* [x] Add a header that shows the author, timestamp, and the full commit
message
* [x] Remove stage/unstage buttons in commit view
* [x] Truncate the commit message in the tab
* Bugs
* [x] Dedup commit tabs within a pane
* [x] Add a tooltip to the tab
Release Notes:
- Added the ability to show past commits in Zed. You can view the most
recent commit by clicking its message in the commit panel. And when
viewing a git blame, you can show any commit by clicking its sha.
### DISCLAIMER
> As of 6th March 2025, debugger is still in development. We plan to
merge it behind a staff-only feature flag for staff use only, followed
by non-public release and then finally a public one (akin to how Git
panel release was handled). This is done to ensure the best experience
when it gets released.
### END OF DISCLAIMER
**The current state of the debugger implementation:**
https://github.com/user-attachments/assets/c4deff07-80dd-4dc6-ad2e-0c252a478fe9https://github.com/user-attachments/assets/e1ed2345-b750-4bb6-9c97-50961b76904f
----
All the todo's are in the following channel, so it's easier to work on
this together:
https://zed.dev/channel/zed-debugger-11370
If you are on Linux, you can use the following command to join the
channel:
```cli
zed https://zed.dev/channel/zed-debugger-11370
```
## Current Features
- Collab
- Breakpoints
- Sync when you (re)join a project
- Sync when you add/remove a breakpoint
- Sync active debug line
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Restart stack frame (if adapter supports this)
- Variables
- Loaded sources
- Modules
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Debug console
- Breakpoints
- Log breakpoints
- line breakpoints
- Persistent between zed sessions (configurable)
- Multi buffer support
- Toggle disable/enable all breakpoints
- Stack frames
- Click on stack frame
- View variables that belong to the stack frame
- Visit the source file
- Show collapsed stack frames
- Restart stack frame (if adapter supports this)
- Loaded sources
- View all used loaded sources if supported by adapter.
- Modules
- View all used modules (if adapter supports this)
- Variables
- Copy value
- Copy name
- Copy memory reference
- Set value (if adapter supports this)
- keyboard navigation
- Debug Console
- See logs
- View output that was sent from debug adapter
- Output grouping
- Evaluate code
- Updates the variable list
- Auto completion
- If not supported by adapter, we will show auto-completion for existing
variables
- Debug Terminal
- Run custom commands and change env values right inside your Zed
terminal
- Attach to process (if adapter supports this)
- Process picker
- Controls
- Continue
- Step back
- Stepping granularity (configurable)
- Step into
- Stepping granularity (configurable)
- Step over
- Stepping granularity (configurable)
- Step out
- Stepping granularity (configurable)
- Disconnect
- Restart
- Stop
- Warning when a debug session exited without hitting any breakpoint
- Debug view to see Adapter/RPC log messages
- Testing
- Fake debug adapter
- Fake requests & events
---
Release Notes:
- N/A
---------
Co-authored-by: Piotr Osiewicz <24362066+osiewicz@users.noreply.github.com>
Co-authored-by: Anthony Eid <hello@anthonyeid.me>
Co-authored-by: Anthony <anthony@zed.dev>
Co-authored-by: Piotr Osiewicz <peterosiewicz@gmail.com>
Co-authored-by: Piotr <piotr@zed.dev>
Closes#4271
Implemented by kicking of a task on the main thread at the end of
`Editor::handle_input` which waits for the buffer to be re-parsed before
checking if JSX tag completion possible based on the recent edits, and
if it is then it spawns a task on the background thread to generate the
edits to be auto-applied to the buffer
Release Notes:
- Added support for auto-closing of JSX tags
---------
Co-authored-by: Cole Miller <cole@zed.dev>
Co-authored-by: Max Brunsfeld <max@zed.dev>
Co-authored-by: Marshall Bowers <git@maxdeviant.com>
Co-authored-by: Mikayla <mikayla@zed.dev>
Co-authored-by: Peter Tripp <peter@zed.dev>
Closes https://github.com/zed-industries/zed/issues/10122
Closes https://github.com/zed-industries/zed/issues/25034
When formatting buffers or reloading them after they change on disk, we
performed a diff between the buffer's current contents and the new
content. We need this diff in order preserve the positions of cursors
and other decorations when updating the buffer's text.
In order to handle changes within lines, we would previously compute a
*character-wise* diff. This was extremely expensive for large files.
This PR gets rid of the character-wise diff, and instead performs a
normal line-wise diff. Then, for certain replace hunks, we compute a
secondary word-based diff. Also, I've switched to the
[`imara-diff`](https://github.com/pascalkuthe/imara-diff) crate, instead
of `similar`.
Release Notes:
- Fixed a hang that could occur when large files were changed on disk or
formatted.
Release Notes:
- Render unstaged hunks in the project diff editor with a slashed
background
---------
Co-authored-by: maxbrunsfeld <max@zed.dev>
Co-authored-by: Max Brunsfeld <maxbrunsfeld@gmail.com>
This is a refactoring PR that does three things:
- First, it introduces a new `diff` crate that holds the previous
contents of the `git::diff` module, plus the `BufferChangeSet` type
formerly of `project::buffer_store`. The new crate is necessary since
simply moving `BufferChangeSet` into `git::diff` results in a dependency
cycle due to the use of `language::Buffer` to represent the diff base in
`BufferChangeSet`.
- Second, it renames the two main types in the new diff crate:
`BufferDiff` becomes `BufferDiffSnapshot`, and `BufferChangeSet` becomes
`BufferDiff`. This reflects that the relationship between these two
types (immutable cheaply-cloneable "value" type + stateful "resource
type" with subscriptions) mirrors existing pairs like
`Buffer`/`BufferSnapshot`. References to "change sets" throughout the
codebase are updated to refer to "diffs" instead.
- Finally, it moves the base_text field of the new BufferDiff type to
BufferDiffSnapshot.
Release Notes:
- N/A
---------
Co-authored-by: maxbrunsfeld <max@zed.dev>
This adds a new version of the project diff editor to go alongside the
new git panel.
The basics seem to be working, but still todo:
* [ ] Fix untracked files
* [ ] Fix deleted files
* [ ] Show commit message editor at top
* [x] Handle empty state
* [x] Fix panic where locator sometimes seeks to wrong excerpt
Release Notes:
- N/A
Note: Design hasn't been reviewed yet, but the logic is done
When the user switches the inline completion provider to `zed`, we'll
show a modal prompting them to accept terms if they haven't done so:
https://github.com/user-attachments/assets/3fc6d368-c00a-4dcb-9484-fbbbb5eb859e
If they dismiss the modal, they'll be able to get to it again from the
inline completion button:
https://github.com/user-attachments/assets/cf842778-5538-4e06-9ed8-21579981cc47
This also stops zeta sending requests that will fail immediately when
ToS are not accepted.
Release Notes:
- N/A
---------
Co-authored-by: Richard <richard@zed.dev>
Co-authored-by: Danilo Leal <daniloleal09@gmail.com>
Co-authored-by: Joao <joao@zed.dev>
