The get_provision_timeout and get_agent_timeout functions used printenv with
dynamically constructed variable names, which is fragile across shells and
platforms. Replace with eval-based parameter expansion using the already-
sanitized safe_agent variable (restricted to [A-Za-z0-9_]).
Fixes#3234
Agent: security-auditor
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
Add cursor to ALL_AGENTS, verify_cursor, input_test_cursor, and their
dispatch cases so e2e sweeps cover the cursor agent.
Fixes#3042
Agent: issue-fixer
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
Hermes installs a Python virtualenv which takes 20+ min on fresh VMs.
The previous 300s install timeout caused the CLI to give up before
writing .spawnrc, leading to 30-min E2E timeouts on Hetzner, DigitalOcean,
and GCP (but not Sprite, which has a manual .spawnrc fallback).
Changes:
- agent-setup.ts: hermes installAgent timeout 300s → 600s
- common.sh: add hermes per-agent overrides (_PROVISION_TIMEOUT_hermes=720,
_AGENT_TIMEOUT_hermes=3600) to give the install enough headroom
- package.json: bump CLI version 0.25.26 → 0.25.27
-- qa/e2e-tester
Co-authored-by: spawn-qa-bot <qa@openrouter.ai>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
Three fixes for Sprite E2E failures in long-running batches (73+ min):
1. Retry `_sprite_provision_verify`: list failures now retry 3x with
exponential backoff (5s, 10s, 20s) instead of failing immediately.
Fixes kilocode batch 6 "Could not list Sprite instances" errors.
2. Increase `CREATE_TIMEOUT_SECS` default from 300s to 600s and add
`Client.Timeout`, `request canceled`, and `authentication failed`
to the transient error retry pattern in `spriteRetry`. Also uses
linear backoff (3s * attempt) instead of fixed 3s delay.
Fixes hermes batch 7 HTTP timeout errors.
3. Add `_sprite_refresh_auth` + `cloud_refresh_auth` interface. The
E2E orchestrator calls `cloud_refresh_auth` before each provisioning
batch. For Sprite, this re-validates the token via `sprite org list`
and attempts `sprite auth refresh` if expired.
Fixes junie batch 8 "authentication failed" errors.
Fixes#2934
Agent: ux-engineer
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
The E2E framework's run_single_agent function had no overall timeout.
When provision/verify/input_test steps hung (e.g. cloud_exec blocking
on sprite-zeroclaw or digitalocean-opencode), the process would stall
indefinitely without writing a .result file, causing silent test failures.
Add a per-agent wall-clock timeout (default 1800s, 2400s for junie) that
wraps the core provision/verify/input_test logic in a killable subshell.
If the timeout expires, the subshell is killed and a "fail" result is
written, ensuring E2E batches always complete.
Fixes#2714
Agent: code-health
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(e2e): increase provision timeout for junie on hetzner
junie's install takes >720s on Hetzner, exceeding the default
PROVISION_TIMEOUT and causing 100% E2E failure for hetzner-junie.
Add a per-agent provision timeout mechanism in common.sh via
get_provision_timeout(). This checks (in order):
1. PROVISION_TIMEOUT_<agent> env var override
2. Built-in per-agent default (_PROVISION_TIMEOUT_junie=1200)
3. Global PROVISION_TIMEOUT (720s)
provision.sh now calls get_provision_timeout() to resolve the
effective timeout per agent instead of using the flat global.
Fixes#2680
Agent: code-health
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(security): whitelist-sanitize agent name before eval in get_provision_timeout
tr '-' '_' only replaced hyphens, allowing metacharacters like $, backticks,
and ; to pass through into eval, enabling shell injection via a crafted agent
name. Replace with sed whitelist [A-Za-z0-9_] to strip all unsafe chars.
Agent: team-lead
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
On QA VMs running Claude Code via OpenRouter, the API key is stored as
ANTHROPIC_AUTH_TOKEN. Add a fallback in common.sh so e2e.sh picks up
the key from ANTHROPIC_AUTH_TOKEN when ANTHROPIC_BASE_URL points to
openrouter.ai and OPENROUTER_API_KEY is unset.
Also add SPRITE_NAME and SPRITE_ORG to the headless env var whitelist
in provision.sh — these are emitted by _sprite_headless_env() but were
missing from the positive whitelist, causing every Sprite provisioning
attempt to log errors and silently skip the env vars.
Co-authored-by: spawn-qa-bot <qa@openrouter.ai>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
install.sh: Replace color variable interpolation in printf format strings
with %b arguments to prevent format string injection (fixes#2443).
common.sh: Use %b for color escapes in logging functions. Document that
BASH_SOURCE and source usage in load_cloud_driver is intentional since
e2e scripts are filesystem-only, not curl|bash (fixes#2438).
Agent: ux-engineer
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Add defense-in-depth validation across all e2e cloud driver scripts:
- Validate IP addresses match IPv4 format before use in SSH commands
(aws, digitalocean, gcp, hetzner)
- Validate SSH username contains only safe characters (gcp)
- Validate resource IDs are numeric before interpolating into API URLs
(digitalocean droplet IDs, hetzner server IDs)
- URL-encode app name in Hetzner API query parameter to prevent
query parameter injection
- Validate numeric env vars (INPUT_TEST_TIMEOUT, PROVISION_TIMEOUT,
INSTALL_WAIT) that get interpolated into remote command strings
Fixes#2432, #2433, #2434, #2435, #2442
Agent: security-auditor
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
The cloud_exec_long dispatcher in common.sh and all five cloud-specific
_exec_long implementations (aws, digitalocean, gcp, hetzner, sprite)
were defined but never called by any code in the e2e test suite.
Co-authored-by: spawn-qa-bot <qa@openrouter.ai>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
The junie agent was added in #2300 but the E2E test scripts were not
updated. This adds junie to ALL_AGENTS, verify dispatch, input test
dispatch, and the provision.sh fallback env configuration.
Co-authored-by: spawn-qa-bot <qa@openrouter.ai>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
* fix(e2e): improve openclaw reliability on AWS and other clouds
Three changes to make openclaw e2e tests more robust:
1. Increase PROVISION_TIMEOUT from 480s to 720s — AWS cloud-init
for "full" tier (Node.js + Bun + build-essential) can exceed 480s,
causing the CLI to be killed before .spawnrc is written.
2. Add .spawnrc manual fallback in provision.sh — if the CLI is killed
before writing .spawnrc, construct it via SSH using OPENROUTER_API_KEY
with agent-specific env vars (openclaw, zeroclaw).
3. Add retry logic to openclaw gateway input test — the gateway can
crash with 1006 websocket closure on resource-constrained instances.
Now retries once after killing and restarting the gateway process.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(security): fix command injection in e2e provision scripts
- Use printf %q and temp file for api_key handling in provision.sh to
prevent shell metachar injection (single quotes, backticks, $)
- Double-quote env_b64 interpolation in cloud_exec call to prevent
word splitting
- Replace echo with printf in bashrc append to avoid portability issues
- Replace overbroad pkill -f 'openclaw gateway' in verify.sh with
PID-targeted kill via lsof/fuser on port 18789
Agent: pr-maintainer
Co-Authored-By: Claude Sonnet 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Removes eval-based function creation pattern in e2e/lib/common.sh.
Uses variable indirection (ACTIVE_CLOUD global + wrapper functions)
instead of eval to reduce attack surface.
Fixes#2118
Agent: code-health
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
- Add hermes shim scripts for GCP, Hetzner, DigitalOcean, and Daytona
- Update manifest.json matrix entries from "missing" to "implemented"
- Bump default INSTALL_WAIT from 300s to 600s to fix zeroclaw timeout
on small VMs where Rust compilation takes 8-12 minutes
- Update cloud READMEs with hermes usage docs
- Bump CLI version to 0.11.18
Co-authored-by: Ahmed Abushagur <ahmed@abushagur.com>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
- Add `hermes` to ALL_AGENTS in sh/e2e/lib/common.sh (stale: hermes added to
manifest.json in #2023 but never added to the e2e agent list)
- Add verify_hermes() and input_test_hermes() to sh/e2e/lib/verify.sh and
wire them into verify_agent/run_input_test dispatch tables
- Remove dead log_warn() from sh/shared/github-auth.sh (defined but never called)
- Remove dead get_cloud_env_vars() from sh/shared/key-request.sh (no callers outside file)
- Remove dead invalidate_cloud_key() from sh/shared/key-request.sh (no callers anywhere)
Co-authored-by: spawn-qa-bot <qa@openrouter.ai>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
E2E tests were failing because agent installs didn't complete within
the default 120s timeout, and small VMs ran out of memory during builds.
- INSTALL_WAIT: 120s → 300s (with per-cloud override via cloud_install_wait)
- AWS: nano_3_0 → medium_3_0 (all agents need 4GB for reliable installs)
- DigitalOcean: s-1vcpu-512mb-10gb → s-2vcpu-2gb, cap at 3 parallel
- GCP: e2-medium → e2-standard-2
- Hetzner: cap at 5 parallel (primary IP limit)
- Sprite: 300s install wait (slower exec than SSH)
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
When multiple clouds run in parallel, they generate the same app name
(e.g. e2e-claude-TIMESTAMP) and write to the same temp files
(.exit/.stdout/.stderr), causing data corruption.
- Include ACTIVE_CLOUD in make_app_name: e2e-gcp-claude-TIMESTAMP
- Use ${app_name} instead of ${agent} for provision temp files
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
* feat(e2e): multi-cloud test suite with cloud driver pattern
Scale the E2E test suite from AWS-only to all 6 infrastructure clouds
(aws, hetzner, digitalocean, gcp, daytona, sprite) with parallel
execution support.
Architecture:
- Cloud driver pattern: each cloud implements _cloudname_func() functions
- load_cloud_driver() wires cloud-specific functions to generic names
(cloud_exec, cloud_teardown, etc.)
- Shared orchestration stays in one place, cloud details are isolated
New files:
- sh/e2e/e2e.sh — unified entry point with --cloud flag
- sh/e2e/lib/clouds/{aws,hetzner,digitalocean,gcp,daytona,sprite}.sh
Refactored:
- common.sh — removed AWS constants, added load_cloud_driver()
- provision.sh — cloud-agnostic via cloud_headless_env/cloud_provision_verify
- verify.sh — replaced aws_ssh with cloud_exec/cloud_exec_long
- teardown.sh/cleanup.sh — delegate to cloud driver functions
- aws-e2e.sh — thin wrapper: exec e2e.sh --cloud aws
Usage:
e2e.sh --cloud aws # Single cloud
e2e.sh --cloud aws --cloud hetzner # Multiple clouds in parallel
e2e.sh --cloud all --parallel 3 # All clouds, 3 agents parallel
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix(e2e): prevent subshell EXIT trap inheritance and single-cloud early exit
- Reset EXIT trap in multi-cloud subshells to prevent LOG_DIR deletion
before the main process reads log files
- Use `|| true` for single-cloud run_agents_for_cloud to prevent set -e
from skipping the summary on env validation failure
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* feat: default to parallel agent provisioning in e2e tests
All agents within a cloud now run in parallel by default instead of
sequentially. Use --sequential to restore the old behavior.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: cap sprite parallelism, 4GB for openclaw, remove stderr suppression
- Sprite: add _sprite_max_parallel (cap 2 concurrent agents) to avoid
CLI rate limiting that caused all 6 agents to fail
- AWS: use medium_3_0 (4GB) bundle for openclaw which needs more RAM
- Input tests: remove 2>/dev/null from agent commands so failures
produce visible error output instead of empty responses
- Add cloud_max_parallel to driver interface, respected by e2e.sh
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use bash instead of sh for exec_long across all cloud drivers
Ubuntu's /bin/sh is dash, which doesn't support bash-specific PATH
sourcing from .spawnrc/.cargo/env. This caused codex and zeroclaw
input tests to fail with "command not found" even though verify passed.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: codex input test uses positional prompt, not -q flag
codex CLI takes prompt as positional arg: `codex "PROMPT"`.
The -q flag doesn't exist, causing "Usage:" error output.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use codex exec -q for non-interactive input test
codex requires `exec` subcommand for non-interactive mode.
Plain `codex PROMPT` expects a TTY (stdin is not a terminal).
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: codex exec takes no -q flag, just positional prompt
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use cx23 instead of deprecated cx22 for Hetzner e2e tests
Hetzner deprecated server type cx22 (ID 104). The default now uses cx23.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
* feat!: remove Fly.io cloud provider support
Drop Fly.io as a supported cloud provider. Sprite (which uses Fly.io
infrastructure internally) is retained.
- Delete packages/cli/src/fly/ module, sh/fly/ scripts, fixtures/fly/
- Remove fly cloud entry and 6 fly matrix entries from manifest.json
- Remove fly imports, destroy cases, and connection handlers from commands.ts
- Remove fly-ssh sentinel from security.ts
- Port E2E test suite from Fly.io to AWS Lightsail (fly-e2e.sh → aws-e2e.sh)
- Update README (7 clouds, 42 combinations), CLAUDE.md, and skill prompts
- Clean up fly references in build config, gitignore, icon sources
- Bump CLI version to 0.11.0
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* chore: restore Docker image build under sh/docker/
Move openclaw Dockerfile from sh/fly/docker/ to sh/docker/ and rename
workflow from fly-docker.yml to docker.yml with updated paths.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* style: fix extra blank lines in commands.ts
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: spawn-bot <spawn-bot@openrouter.ai>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: L <6723574+louisgv@users.noreply.github.com>
- MEDIUM: Validate flyctl auth status before empty FLY_API_TOKEN fallback
in provision.sh (fail fast instead of silent failure)
- LOW: Fix sed -i portability in qa.sh (use sed -i.bak for macOS compat)
- LOW: Increase FLY_API_TOKEN expiry from 2h to 8h in common.sh
- LOW: Add --proto '=https' to all curl -L calls in digitalocean scripts
(6 files) to prevent HTTP downgrade on redirects
Fixes#1913
Agent: code-health
Co-authored-by: B <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Sonnet 4.5 <noreply@anthropic.com>
* feat: add live input/output E2E verification for agents
The E2E suite previously only verified static artifacts (binaries, config
files, env vars). An agent with a broken API key or crash-on-launch bug
would pass all checks. This adds an input test phase that sends a real
prompt to each agent and verifies the response contains a marker string.
- Add fly_ssh_long() with configurable timeout for long-running commands
- Add per-agent input test functions (claude -p, codex -q, openclaw -p,
zeroclaw agent -p; opencode/kilocode skip as TUI-only)
- Add run_input_test() dispatcher with SKIP_INPUT_TEST env var support
- Add --skip-input-test CLI flag to fly-e2e.sh
- Chain input test after verify in run_single_agent() pipeline
- Add INPUT_TEST_TIMEOUT constant (default 120s, env-overridable)
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: format p.text({ message }) to multi-line for biome
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
---------
Co-authored-by: spawn-bot <spawn-bot@openrouter.ai>
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Reorganizes the project so all shell scripts live under a dedicated
/sh directory, enabling the OpenRouter rewrite URL to point at /sh/
instead of the repository root.
Moves:
- cli/install.sh → sh/cli/install.sh
- shared/*.sh → sh/shared/*.sh
- {cloud}/{agent}.sh → sh/{cloud}/{agent}.sh (48 scripts)
- {cloud}/README.md → sh/{cloud}/README.md
- e2e/*.sh → sh/e2e/*.sh
- test/macos-compat.sh → sh/test/macos-compat.sh
- test/fixtures/**/*.sh → sh/test/fixtures/**/*.sh
Updates all references:
- RAW_BASE path construction in commands.ts, update-check.ts
- GitHub auth URL in agent-setup.ts
- Self-referencing URLs in install.sh, github-auth.sh
- CI workflow paths in lint.yml, cli-release.yml
- Test file paths in install-script-validation, manifest-integrity
- Documentation in README.md, cli/README.md, CLAUDE.md
- QA scripts in .claude/skills/
Co-authored-by: lab <6723574+louisgv@users.noreply.github.com>
Co-authored-by: Claude Opus 4.6 (1M context) <noreply@anthropic.com>
