Roll back two changes from a1ef8697b/0a5d308c9 that were not justified
by the actual threat model or release-pipeline needs:
- .github/workflows/release.yml: restore the supported `ossutil config -k`
invocation. The earlier switch to writing the .ossutilconfig INI file
in-process was meant to keep the access-key out of /proc/<pid>/cmdline,
but GitHub-hosted runners are single-tenant ephemeral VMs where no other
user can read that namespace. The benefit was theoretical; the cost was
taking on a brittle dependency on ossutil's undocumented config format.
- scripts/upload-aliyun-oss-assets.js: revert the uploadAssets parallel
rewrite (Promise.all + spawn + setTimeout) back to the original sync
spawnSync loop with retry. Release-time uploads of ~6 small files do
not need parallelism, and the async refactor changed the public
contract (sync→async) for no real wall-clock win.
Kept from those commits:
- The cleanup `if: always()` step that removes RUNNER_TEMP/.ossutilconfig
at the end of the publish job.
- The cross-platform sleepSync(ms) helper, since `spawnSync('sleep', ...)`
still does not work on Windows runners.
- The INSTALLATION_GUIDE.md doc fix.
- All other round-2 fixes.
Test assertions updated for the restored sync uploadAssets contract.
Add two integration tests that route a temp-directory ossutil shim onto
PATH so uploadAssets actually spawns the real binary with the real cp
argv:
- happy-path test asserts the destination URI, `-c <config>`, `--acl
public-read`, and per-asset cp invocations land for both inputs.
- failure-path test asserts non-zero ossutil exits surface as an
aggregate `asset uploads failed` error after the retry budget runs out.
- scripts/tests/upload-aliyun-oss-assets.test.js: cover --help short-circuit,
required-option validation (--bucket/--config/--prefix/empty assets),
unknown options, missing option values, and trailing-slash prefix
normalization.
- scripts/verify-installation-release.js: switch the win-only zip branch
from `startsWith('win-')` to the strict `=== 'win-x64'` check used by
build-standalone-release.js, and add a comment recording that the two
derivations must stay aligned. Without this the helpers would diverge
the moment a non-x64 win target gets added.
Workflow:
- Configure Aliyun OSS Credentials: write the ossutil config file directly
with restricted umask instead of invoking `ossutil config -k <secret>`.
Passing the access-key secret via argv made it visible in /proc/<pid>/cmdline
for the lifetime of that step; writing the INI file in-process keeps the
secret out of the process table.
upload-aliyun-oss-assets.js:
- Upload assets in parallel with `Promise.all` + async `spawn` instead of a
sequential `spawnSync` loop. Each asset keeps its own retry budget; failures
are aggregated so one flaky upload does not mask a separate failure.
- Replace the bespoke `Atomics.wait` retry sleep with `timers/promises#setTimeout`
now that the loop is async.
INSTALLATION_GUIDE.md:
- Drop the misleading "instead of overwriting the global installation/
entrypoint objects" sentence; the workflow has always also refreshed the
global versionless objects so curl|bash links keep resolving without a
version segment. Document the rollback story instead.
Workflow:
- Move 'Publish Aliyun OSS Latest VERSION' to run after the hosted installer
assets are uploaded and verified, so the latest/VERSION pointer only flips
once every release artifact is in place. Previously a hosted-sync failure
could leave the pointer ahead of the actual installer scripts.
upload-aliyun-oss-assets.js:
- Replace `spawnSync('sleep', ...)` retry backoff with an Atomics.wait-based
cross-platform sleep so retries also work on Windows runners.
install-qwen-standalone.bat:
- :DetectTarget no longer emits TARGET=win-arm64 because RELEASE_TARGETS has
no win-arm64 archive; ARM64 hosts now fall through to the unsupported-arch
branch and (in detect mode) get the npm fallback instead of a 404.
- Add QWEN_INSTALL_CURL_EXE to :ValidateRawEnvironmentOptions so this curl
override is checked for shell metacharacters like every other knob.
- Replace `call echo %%i>>...` with plain `echo %%i>>...` when capturing
pre-install qwen.cmd paths; `call` triggered an extra parse pass that
could interpret &/|/<,>/etc. inside a directory name as command separators.
- Add `--retry 2` to curl.exe downloads (`:DownloadFile` / `:DownloadFileQuiet`)
to match the shell installer.
- Include expected vs actual hash in the checksum-mismatch error message.
install-qwen-standalone.ps1:
- Stage the downloaded installer at a cryptographically random temp path
(`qwen-installer-<random>.bat`) so a same-user attacker cannot pre-stage a
malicious .bat at a predictable path and race the verify/execute window.
- Atomically install the current-session cmd shim by writing to a sibling
`.new` temp file then renaming, so a partial write cannot leave a
half-written shim on PATH.
- Add `--retry 2` to the curl.exe download path.
- Include expected vs actual hash in the checksum-mismatch error message.
install-qwen-standalone.sh:
- Include expected vs actual hash in the checksum-mismatch error message.
uninstall-qwen-standalone.ps1:
- Accept `-Purge` and `-Help` parameters; previously every CLI flag was
silently dropped, so users running with `-Purge` got no purge and no error.
`-Purge` maps to `QWEN_UNINSTALL_PURGE=1`.
uninstall-qwen-standalone.sh:
- `remove_install_wrapper` additionally requires the wrapper file to start
with a `#!` shebang before it deletes it; a user-authored script that just
happens to mention the install path now stays untouched.
verify-installation-release.js, build-hosted-installation-assets.js:
- Include expected vs actual hash in the checksum-mismatch error messages.
scripts/tests/install-script.test.js:
- Update assertions for the new error wording, the curl `--retry 2` flag,
the dropped ARM64 detection, and the new release-step ordering.
- release.yml: remove `trap EXIT` inside the Configure step; it deleted
${RUNNER_TEMP}/.ossutilconfig as soon as the configure shell exited,
so every subsequent step (publish/sync/verify) lost the credentials.
Move credential cleanup to a final `if: always()` step at the job tail.
- install-qwen-standalone.sh: drop the predictable PID-based mktemp -d
fallback in race_mirror_head; if mktemp fails, return "github" instead
of using /tmp/qwen-mirror.$$ which a local attacker could pre-create
to bias mirror selection.
- Remove REQUIRE_CHECKSUM dead code, always hard-fail on checksum issues
- Add JSDoc to HOSTED_INSTALLER_BEHAVIOR_PATTERNS explaining its purpose
- Add credential cleanup trap for ossutilconfig in release workflow
- Add 3-attempt retry with exponential backoff for OSS uploads
- Tighten findstr SOURCE regex to require leading letter
* perf(cli): code-split lowlight to cut startup V8 parse cost
Move the syntax-highlight engine out of the synchronously-parsed cli.js
entry into a separately-emitted chunk and load it via dynamic import on
the first code-block render. Until the chunk arrives, code blocks render
as plain text; the next React commit of the surrounding subtree picks up
the highlighted version, so users never see incorrect highlighting –
just an imperceptibly later transition for the very first code block.
Mechanics:
- esbuild config: switch entry to outdir + splitting:true so that
`await import('lowlight')` produces an actual on-disk chunk that's
only parsed by V8 when first needed.
- esbuild-shims: rename injected __dirname/__filename to qwen-prefixed
symbols + use `define` to redirect free references. Previous inject
collided with vendored libraries (yargs) that ship their own
`var __dirname` ESM-compat polyfill once splitting flattens chunks.
- prepare-package: include the new chunks/ directory in the published
package's files list.
- CodeColorizer: keep the public colorize{Code,Line} signatures and HAST
rendering identical; on first call when the chunk hasn't loaded it
returns the plain line and fires the dynamic import via a tiny
standalone loader module.
- lowlightLoader (new): isolates the lazy-load surface to a module with
zero transitive imports (no themeManager, settings, or core). This
lets test-setup prime the cache without dragging the whole UI module
graph into every test file, which was observed to perturb theme and
settings test outcomes when CodeColorizer was imported directly.
- test-setup: await loadLowlight() once via the standalone loader so
synchronous snapshot tests see the highlighted output deterministically.
Measurements (real $HOME, n=15 interleaved A/B vs main HEAD, macOS):
| Metric | Before (mean±sd ms) | After (mean±sd ms) | Δ | t | p |
| ------------------ | ------------------- | ------------------ | -------- | ------ | -------- |
| firstByte (wall) | 1633.5 ± 88.7 | 1475.8 ± 73.3 | -157.7 | 5.31 | 1.33e-5 |
| idle (wall) | 2048.7 ± 93.6 | 1902.3 ± 80.2 | -146.3 | 4.60 | 8.71e-5 |
| cli.js size | 25 MB | 6.9 MB | -18.1 MB | — | — |
Both metrics clear the +50ms-or-10% Welch's t-test bar by an order of
magnitude. cli.js drops 72%; total payload (cli.js + chunks/) is
similar but only cli.js is parsed at module-eval time, which is the
phase that dominates the user-visible startup gap.
How to validate:
npm run bundle
ls dist/ # cli.js + chunks/lowlight-*.js
node dist/cli.js -y # interactive UI still renders
Generated with AI
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* fix(cli): resolve chunk-relative sibling paths under esbuild splitting
With `splitting: true`, esbuild hoists modules with shared dependencies
into `dist/chunks/`. Three modules derived runtime paths from
`import.meta.url` assuming they were co-located with `cli.js`; once
hoisted, `path.dirname(fileURLToPath(import.meta.url))` resolved to
`dist/chunks/` and sibling-asset lookups silently missed:
- `skill-manager.ts`: bundledSkillsDir → `dist/chunks/bundled` (actual
`dist/bundled/`). The `existsSync` guard swallowed the miss, dropping
all four bundled skills (`/review`, `/qc-helper`, `/batch`, `/loop`)
with no user-visible signal.
- `ripgrepUtils.ts`: `getBuiltinRipgrep()` → `dist/chunks/vendor/...`.
Falls back to system rg if installed, otherwise null on minimal
hosts — degrading grep to the slow internal scanner.
- `i18n/index.ts`: `getBuiltinLocalesDir()` → `dist/chunks/locales`.
User-visible behavior survives via the static glob import in
`tryImportBundledTranslations`, but the loose-on-disk override path
is dead.
Each module now strips a trailing `chunks` segment when present, so
the lookup resolves under `dist/`. In source / transpiled modes the
basename is never `chunks`, so the fallback is a no-op.
Also:
- Add `chunks` to `DIST_REQUIRED_PATHS` in `create-standalone-package.js`
so a regressed bundle that produces only `cli.js` fails the
pre-packaging check instead of shipping a broken archive.
- Expand `esbuild-shims.js` header so future contributors understand
that `__qwen_filename` / `__qwen_dirname` always resolve to the
shim's chunk file (dist/chunks/) and that sibling-asset lookups
must strip the `chunks` segment.
Reported by claude-opus-4-7 via Qwen Code /qreview on #4070.
Generated with AI
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* perf(cli): prefetch lowlight from AppContainer + harden loader
Three follow-ups to the lowlight code-split:
- AppContainer fires `loadLowlight()` from a mount effect so the dynamic
import is already in flight before any code block needs colorizing.
Without this, code blocks committed to ink's append-only `<Static>`
region before the import resolves stay plain text for the rest of
the session — Static can only be re-rendered via `refreshStatic`,
which is not wired to lowlight load completion. Common reachable
paths: short `--prompt -p` runs that finalize quickly, Ctrl+C-
cancelled first turns, and the first-paint history replay on
`--resume`. The startup parse-cost win is preserved (V8 still
parses off the critical path).
- `lowlightLoader.ts` latches the first import failure so subsequent
calls short-circuit to a rejected promise instead of re-attempting
`import('lowlight')` on every keystroke. The colorizer already falls
back to plain text on miss; recovery requires a fresh process anyway.
- `test-setup.ts` wraps the top-level `await loadLowlight()` in
try/catch. A transient import failure no longer crashes the entire
vitest run — tests that hit a code block render the plain-text
fallback and surface a warning.
- `CodeColorizer.tsx` header comment updated to point at the
AppContainer prefetch instead of claiming first-paint always sees
a loaded instance.
Reported by DeepSeek/deepseek-v4-pro and claude-opus-4-7 via Qwen Code
/review and /qreview on #4070.
Generated with AI
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* refactor(bundle): extract resolveBundleDir helper, apply to extensions/new
Centralises the `chunks/` strip pattern that three sites
(`i18n/index.ts`, `skills/skill-manager.ts`, `utils/ripgrepUtils.ts`)
each duplicated after the round-3 fix in d581da04d. The implicit
coupling to `esbuild.config.js`'s `chunkNames: 'chunks/[name]-[hash]'`
now lives in a single helper (`packages/core/src/utils/bundlePaths.ts`),
so a future rename only needs updating in one place.
Also applies the same anchor to `commands/extensions/new.ts:EXAMPLES_PATH`.
That module is currently bundled into `cli.js` (so the strip is a no-op
today), but `qwen extensions new --help` always reads the examples
directory in its yargs `builder` — confirmed against the built bundle
that the lookup hits `dist/examples/` (sibling of `cli.js`). Using the
helper future-proofs against esbuild later hoisting the module into a
shared chunk, where the bare `__dirname`/`import.meta.url` lookup would
silently break the command for every end user.
While here, surface lowlight-load failures from `AppContainer`'s
prefetch effect to the debug channel (`debugLogger.warn`) instead of
swallowing them silently. The loader already latches failures
permanently, so this fires at most once per session; `CodeColorizer`
continues to fall back to plain text on miss, so user-visible behaviour
is unchanged.
Generated with AI
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* fix(bundle): restore __filename shadow in ripgrepUtils; harden lowlight loader
Round-4 review (wenshao 2026-05-13 13:12) flagged five issues in the
recent code-split work. This commit addresses all of them.
CRITICAL — `packages/core/src/utils/ripgrepUtils.ts`: the round-3
`resolveBundleDir` refactor removed the local `__filename` declaration
but `getBuiltinRipgrep` still references bare `__filename` to decide
how many `..` segments to walk. In `npm run dev` (tsx, ESM) `__filename`
is undefined so the function throws `ReferenceError`. In the bundle
esbuild's `define` rewrites it to `__qwen_filename` (the shim chunk
path), which is the wrong string but happens to short-circuit to
`levelsUp = 0` — accidentally correct only because the chunk-path
string never contains `path.join('src', 'utils')`. Reproduced via tsx:
`__filename is not defined`; fixed by re-introducing the explicit
local shadow plus a comment explaining why centralising both helpers
into `resolveBundleDir` cannot replace the per-file shadow.
`packages/cli/src/ui/utils/lowlightLoader.ts`: the previous permanent
`lowlightFailed` latch left syntax highlighting dead for the entire
process lifetime on transient errors (EMFILE, antivirus locks,
slow-disk-after-wake). Replaced with a 30-second cooldown — within the
window subsequent calls return the cached rejection synchronously
(keeps the per-render short-circuit that protects against
permanently-broken installs); after the cooldown the next call retries
the dynamic import. Exposes `isLowlightCoolingDown()` so render-hot
callers can also skip duplicate failure logging.
`packages/cli/src/ui/utils/CodeColorizer.tsx`: hoisted
`loadLowlight()` + log out of the per-line render loop into a single
`ensureLowlightLoading()` call at the top of `colorizeCode`. In the
failure case this collapses hundreds of duplicate debug entries (one
per line) to one per block. The instance is now passed down to
`highlightAndRenderLine` as a parameter.
`packages/core/src/utils/bundlePaths.ts` + `esbuild.config.js`:
exposed `BUNDLE_CHUNK_DIR = 'chunks'` as a named constant and updated
`esbuild.config.js` to interpolate the same name into `chunkNames`
(plus an explicit "MUST stay in sync" comment). Renaming on one side
without the other now stands out at review time. Also expanded the
`define` comment with a contributor-facing warning describing exactly
why bare `__dirname` / `__filename` in source files becomes the shim
chunk path, and pointing future contributors at the
`fileURLToPath(import.meta.url)` shadow pattern (and
`resolveBundleDir` for sibling-asset lookups).
Verified:
- typecheck (all 4 workspaces): clean
- packages/core tests: 7747 passing (no regressions)
- packages/cli tests: only the pre-existing `useAtCompletion.test.ts`
filesystem-order failures remain (confirmed against `git stash`)
- `npm run bundle` succeeds; `node dist/cli.js --version` returns
`0.15.10`; `node dist/cli.js --help` renders normally
- `npx tsx <call getBuiltinRipgrep>` now returns the vendored path
instead of throwing `ReferenceError`
Generated with AI
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* fix(bundle): validate lowlight API shape; sync doc-comment drift; add tests
- lowlightLoader: validate runtime shape of createLowlight() before the
`as Lowlight` cast so an upstream API rename routes through the cooldown
latch instead of silently degrading every code block to plain text.
- bundlePaths: correct doc comment — esbuild.config.js maintains its own
`BUNDLE_CHUNK_DIR` constant rather than importing this one (it runs
before any TS compile step).
- AppContainer: update prefetch-failure comment to reference the cooldown
symbols (`LOWLIGHT_RETRY_COOLDOWN_MS` / `lowlightLastFailureAt`) that
replaced the removed `lowlightFailed` latch.
- New unit tests covering the lowlightLoader state machine (success,
in-flight dedup, shape mismatch, cooldown skip, post-cooldown retry)
and `resolveBundleDir`'s strip-only-on-exact-match contract.
* test(bundlePaths): use path.resolve for Windows-compatible absolute paths
CI failure on Windows: the new `resolveBundleDir` tests built expected
values with `path.join(path.sep, ...)` (e.g. `\tmp\dist`), but
`pathToFileURL` resolves drive-less paths against the current drive
on Windows. The URL -> `fileURLToPath` round-trip returned `D:\tmp\dist`,
while the expectation stayed `\tmp\dist`, tripping all three new
assertions.
Switched both the URL source and the expected value to a single
`path.resolve(path.sep, ...)` anchor per test so both sides absorb
whatever the platform considers absolute. POSIX behaviour is unchanged
(`/tmp/dist` -> `/tmp/dist`).
---------
Co-authored-by: 秦奇 <gary.gq@alibaba-inc.com>
Co-authored-by: Qwen-Coder <qwen-coder@alibabacloud.com>
* fix(i18n): Correct zh-TW translations to match Traditional Chinese conventions
Fix ~131 lines of Traditional Chinese (zh-TW) translations that used
Simplified Chinese character forms instead of standard Traditional
Chinese usage.
Changes:
- 文件 → 檔案 (47 occurrences)
- 爲 → 為 (45 occurrences)
- 啓 → 啟 (44 occurrences)
- 曆史 → 歷史 (6 occurrences)
- 鏈接 → 連結 (4 occurrences)
- 菜單 → 選單 (3 occurrences)
* fix(i18n): Replace 服務器 with 伺服器 (15 occurrences)
Align with Traditional Chinese convention where 伺服器 is the standard
term for 'server' in computing contexts.
* fix(i18n): Update zh-TW.js header comment to prevent accidental overwrite
Clarify that the file is the authoritative source and should not be
overwritten with auto-generated output, to prevent future maintainers
from regenerating with raw OpenCC and losing manual corrections.
* fix(i18n): Add zh-TW regression check and maintenance docs
Addresses reviewer feedback on PR #4129 (points 2 and 3):
- scripts/check-i18n.ts: Iterate over parsed zh-TW translation values
(not raw file content) and report the offending key. Replace the
earlier substring list with ZH_TW_FORBIDDEN_PATTERNS, which targets
the three real regression categories: variant Traditional characters
produced by OpenCC s2t (爲, 啓), Mainland-Chinese vocabulary (服務器,
菜單, 鏈接), and pure Simplified characters. Excludes 禁用 / 配置 /
文件 / 打開 to avoid false positives on Taiwan-valid usage.
- scripts/tests/check-i18n.test.ts: Cover the new check, including
negative cases for Taiwan-valid vocabulary.
- docs/users/features/language.md: Document zh-TW maintenance — the
vocabulary table, why raw OpenCC s2t output is not acceptable, and
where the CI-enforced list lives.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(i18n): Address review feedback on zh-TW check (#4129)
- check-i18n.ts: Sort ZH_TW_FORBIDDEN_PATTERNS longest-first and break
on first match so e.g. `历史` reports the specific bigram instead of
also firing the bare `历` rule (no duplicate CI errors).
- check-i18n.ts: Add ZH_TW_ALLOWED_EXCEPTIONS escape hatch so a future
legitimate translation (e.g. 區塊鏈 in a UI string) can opt out by key
without weakening the global pattern list.
- docs/users/features/language.md: Add a "CI enforced?" column so
contributors can tell which rows block CI vs. which are review-only
style guidance. Replace bare `曆` in the table with the `曆史` bigram
and note that `曆` is correct in calendar terms (日曆, 農曆, 西曆) —
prevents a future maintainer from globally replacing 曆→歷.
- Tests: Cover the dedup behavior on overlapping patterns.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* docs(i18n): Note word-boundary limitation of zh-TW substring check
Document the known limitation that `includes()`-based pattern matching
does not respect Chinese word boundaries — a bigram like `鏈接` will
false-positive on `區塊鏈接口` (區塊鏈 + 接口). Direct contributors to
`ZH_TW_ALLOWED_EXCEPTIONS` when this happens instead of weakening the
pattern list.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
The installer's write_unix_wrapper shell-quotes the binary path, so
paths containing single quotes (or other shell metacharacters) appear
as shell-quoted strings in the generated wrapper file. The uninstall
script's literal grep -qF missed these, leaving the wrapper orphaned.
Add shell_quote to the uninstall script and match against both the raw
and shell-quoted forms before removing the wrapper.
doskey /exename from a child PowerShell process cannot modify the
parent cmd.exe session. Replace with a simple set PATH=... command
that the user can copy-paste.
- .ps1: detect parent process, update current session PATH, and for
cmd.exe parents emit a `set PATH=...` command
- .bat: skip final instructions when called from PowerShell to avoid
duplicate "Run: qwen" output
Add curl-based one-liner for cmd.exe users. Running the .bat directly
in the current cmd session makes `qwen` available immediately via the
`endlocal & set` trick. The `powershell -c "irm | iex"` path creates
a child process so PATH changes cannot propagate to the parent.
Use the `endlocal & set` trick (same as bun/Rust installers) to export
the install bin directory from the setlocal scope to the current cmd
session. qwen is now usable immediately without restarting the terminal.
Previously MaybeUpdateUserPath was only called when shadow qwen
executables were detected. When no shadow was found, the PATH update
was skipped entirely, leaving the user without qwen on PATH after
restarting their terminal.
Now always persist the bin directory to PATH (unless --no-modify-path
is set), regardless of whether other qwen installations exist.
The %s in the for /f fallback command string was interpreted as a variable
reference by cmd.exe, causing "此时不应有 >" on Chinese Windows. Replace
with a safe fallback and re-enable Expand-Archive progress suppression.
The inline $ProgressPreference = 'SilentlyContinue' caused a cmd.exe
parsing error ("此时不应有 >") on Chinese Windows. Revert to the
original Expand-Archive invocation.
- ensure_managed_install_dir / :EnsureManagedInstallDir now back up
non-qwen directories instead of refusing to install, so users
upgrading from npm or old installers don't hit a hard error
- Simplify header/footer output: remove banner bars, verbose INFO
lines, and redundant "Installation completed!" message
- Match bun.sh / code-server style: minimal, to the point
Prefer curl.exe with -# (hash-mark progress bar) for archive and installer
downloads on Windows 10+. Falls back to Invoke-WebRequest (which shows its
own progress bar) when curl.exe is unavailable. Matches the approach used
by code-server (curl -#fL) and bun.sh (curl.exe -#SfLo).
Add $ProgressPreference = 'SilentlyContinue' to DownloadFile so the
full-screen progress UI does not appear during archive downloads in
interactive PowerShell sessions, consistent with the .ps1 shim.
