This commit adds support for processing network-initiated PDU Session
Modification in a home-routed roaming context, following section 4.3.3.3
of the specification.
- Add support for PDU Session Release in 3GPP TS 23.502 section 4.3.4.3
Note: PCF-initiated release flow for Home-Routed Roaming is not implemented;
- Fix N4 release step ordering in 3GPP TS 23.502 section 4.3.4.2 UE or network requested PDU Session Release for Non-Roaming and Roaming with Local Breakout
Previously, policies were configured via YAML files without MongoDB.
This update enhances the YAML approach by adding the 'supi_range' key to
filter policies based on UE SUPI ranges. When both 'supi_range' and
'plmn_id' are provided, both conditions must be met.
Note that PLMN-ID filtering will be deprecated in a future release.
In case that mapped HPLMN SST was not set by the UE in the request to
Establish PDU Session, AMF/SMF would assume it is set to 0 (since the
recent change to allow SST value 0).
SMF selection according to 4.3.2.2.3 of TS23.502.
V-SMF makes discovery in the V-NRF according to V-NSSF.
H-SMF makes discovery in the H-NRF according to H-NSSF.
(The AMF goes through the V-NSSF and forwards the message seeking the NRF to the H-NSSF.)
If the UE continuously attempts to Attach while changing PDN Type,
it will cause the wrong IP to be assigned.
(e.g PDU-Type : IPv4v6 -> IPv4 -> IPv4v6)
This is because we use two variables at the same time,
one to read and store the Static IP from the Subscriber DB and
one to store the IP assigned from SMF, called session->paa.
When the UE attaches with PDN-Type set to IPv4v6,
MME saves the allocated IP in session->paa.
However, MME thinks it has been assigned a static IP based on the information
in session->paa, so changing the PDN-Type may result in the wrong IP
being assigned.
To solve this problem, I separated the variable(session->paa) that stores
the allocated IP received from SMF and the variable(session->ue_ip) that stores
the Static IP read from the Subscriber DB.
Therefore, the information read from the Subscriber DB
(session->session_type and session->ue_ip) should not be modified.
First of all, it crashes when creating a Dedicated Bearer
on the default Session that is created for the first time.
This behavior should be possible, so the related ASSERT is removed.
Next, the InitialContextRequest is modified
during the Attach Request to include the first Bearer.
Finally, there was an issue where trying to create a Dedicated Bearer
with SGsAP enabled resulted in an InitialContextSetupRequest message
with a PTI of zero. This is because MME initializes the PTI to 0
upon receiving the Create Bearer Request while processing SGsAP.
All of these issues has been fixed.
For bi-directions, the rules are created in the same form as for downlink
as shown below, so to apply them for uplink, we need to swap the rules
according to the interface.
RX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> Destination <UE_IP> <UE_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
RX : permit in from <UE_IP> <UE_PORT> to <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
GX : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
PFCP : permit out from <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT> to <UE_IP> <UE_PORT>
RULE : Source <UE_IP> <UE_PORT> Destination <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
TFT : Local <UE_IP> <UE_PORT> REMOTE <P-CSCF_RTP_IP> <P-CSCF_RTP_PORT>
* [AMF/MME] UEContextReleaseCommand in Integrity (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
* [AMF/MME] UEContextReleaseCommand after Interity Protected (#2786)
Modified not to send UEContextReleaseCommand in Integrity Unprotected
NAS message such like Registration or Service request.
* Add "subscriber_status" cmd to open5gs-dbctl to set values for
"subscriber_status" and "operator_determined_barring" DB fields.
* Add webui View+Edit for those same fields.
* open5gs-hssd now takes those values into account and submits
Operator-Determined-Barring AVP with DB-retrieved value if
subscriber_status is set to OPERATOR_DETERMINED_BARRING.
For more information, see TS 29.272 section 5.2.2.1.3 and 7.3.30.
o Generate the private key as below.
$ openssl genpkey -algorithm X25519 -out /etc/open5gs/hnet/curve25519-1.key
$ openssl ecparam -name prime256v1 -genkey -conv_form compressed -out /etc/open5gs/hnet/secp256r1-2.key
o The private and public keys can be viewed with the command.
The public key is used when creating the SIM.
$ openssl pkey -in /etc/open5gs/hnet/curve25519-1.key -text
$ openssl ec -in /etc/open5gs/hnet/secp256r1-2.key -conv_form compressed -text
In ausf/udm.yaml
hnet:
o Home network public key identifier(PKI) value : 1
Protection scheme identifier : ECIES scheme profile A
- id: 1
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 2
Protection scheme identifier : ECIES scheme profile B
- id: 2
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
o Home network public key identifier(PKI) value : 3
Protection scheme identifier : ECIES scheme profile A
- id: 3
scheme: 1
key: /etc/open5gs/hnet/curve25519-1.key
o Home network public key identifier(PKI) value : 4
Protection scheme identifier : ECIES scheme profile B
- id: 4
scheme: 2
key: /etc/open5gs/hnet/secp256r1-2.key
Related to #1779
In the past only GTPv2C was supported, and had the "gtp" generic prefix.
Later on, GTPv1C support was added, and "gtp1" prefix was used.
Let's move GTPv2C specific bits to have "gtp2" prefix too, and leave
"gtp" prefix for generic stuff among different GTP versions.
The network access mode of HSS has been changed to 0 (Packet and Circuit).
Versions of MME prior to v2.4.2 did not use this value. Open5GS set
the attach result of Attach Complete message as it is by looking
at the attach type of the Attach Request message.
Now, if the network access mode of HSS is set to 2 (Only Packet),
this value is affected by MME from v2.4.3. Regardless of the attach type
of the Attach Request, the MME will set EPS Only to the attach result
of Attach Complete.
AMF checks whether it can serve all the S-NSSAI(s) from
the Requested NSSAI present in the Subscribed S-NSSAIs
(potentially using configuration for mapping S-NSSAI values
between HPLMN and Serving PLMN), or all the S-NSSAI(s) marked
as default in the Subscribed S-NSSAIs in the case that
no Requested NSSAI was provided or none of the S-NSSAIs
in the Requested NSSAI are permitted,
i.e. do not match any of the Subscribed S-NSSAIs or not available
at the current UE's Tracking Area (see clause 5.15.3).
- Set the number of UEs in units of AMF/MME instead of gNB/eNB.
- See default value as shown below
Number of UEs per AMF/MME : 4,096
Number of gNB/eNB per AMF/MME : 32
