Always force-create and force-push the API submodule tag so it stays
in sync with the main version tag, even when re-tagging.
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
- Remove broken `git push origin HEAD` in detached HEAD state (commit
artifacts are already pushed via the "Create release branch" step)
- Make subtag push idempotent: use explicit refs/tags/ prefix and
tolerate already-existing remote tags after verifying they point to
the correct commit
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
## What this PR does
Reduces flakiness in E2E tests by addressing the most common failure
modes.
### Kubernetes tenant tests (`run-kubernetes.sh`)
- Increase node Ready timeout from 2m to 5m — CI runners are shared and
resource-constrained
- Fail fast when nodes are not Ready — saves ~7 minutes per failed
attempt by not running LB/NFS tests that will also fail
- Delete stale Kubernetes resources at test start — retries provision
from scratch instead of patching stuck state
- Wait for port-forward to be ready before using it (fixes race
condition)
- Reduce version check polling interval from 5s to 1s
### All app tests (postgres, redis, kafka, clickhouse, mariadb, mongodb,
qdrant, foundationdb, openbao, vminstance, bucket)
- Add pre-cleanup of stale resources from previous failed retries so
each attempt starts clean
### Test runner (`cozytest.sh`)
- Clean up temp directory on test failure (was only cleaned on success,
leaking `/tmp` dirs)
### Release note
```release-note
NONE
```
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Tests**
* Improved e2e robustness by deleting stale resources before creation
(ignore-if-missing, bounded time) and killing leftover port-forwards.
* Added an exit cleanup to consistently remove temporary artifacts and
teardown port-forwards on any exit.
* Added readiness polling for forwarded endpoints (curl with timeout);
made API/version retries more responsive.
* Extended node readiness wait (2m → 5m), dump debug info and fail fast
if unready.
* Made load‑balancer reachability checking explicit and more reliable.
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
Without explicit timeouts, stuck jobs use the GitHub Actions
default of 360 minutes (6 hours). This blocks the concurrency
group and prevents new runs from starting.
Set reasonable limits:
- Build: 30 minutes (normally ~5 min)
- E2E: 120 minutes (normally ~60 min)
Assisted-By: Claude <noreply@anthropic.com>
Signed-off-by: Aleksei Sviridkin <f@lex.la>
The pull-requests workflow used paths-ignore at the trigger level, which
prevented the entire workflow from running on docs-only PRs. This meant
the required "E2E Tests" check was never created, blocking merge for
non-admin users.
Replace trigger-level paths-ignore with a detect-changes job using
dorny/paths-filter. The workflow now always triggers (so checks are
always reported), but build and downstream jobs are skipped when only
docs files change.
Signed-off-by: IvanHunters <xorokhotnikov@gmail.com>
Replace pre-rendered static YAML application with direct helm chart
installation in e2e tests. The chart directory with correct values is
already present in the sandbox after pr.patch application.
- Remove CRD/operator artifact upload/download from CI workflow
- Remove copy-installer-manifest target from testing Makefile
- Use helm upgrade --install from local chart in e2e-install-cozystack.bats
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Aleksei Sviridkin <f@lex.la>
Add -talos suffix to the default variant output file for consistency
with -generic and -hosted variants. Update all references in CI
workflows, e2e tests, upload scripts, and testing Makefile.
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
## What this PR does
This patch adds a conditional for running on a statically defined VM the
maintainers have SSH access to if the pull request has a `debug` label.
This is useful for debugging failing workflows when the diagnostic info
from the pipeline is insufficient.
### Release note
```release-note
[ci] Run builds on a static VM with SSH access if the PR has a debug
label.
```
Signed-off-by: Timofei Larkin <lllamnyp@gmail.com>
## What this PR does
Use GitHub Copilot CLI for automatic changelog generation on tagged
releases.
### How it works
When a new version tag is pushed, the `generate-changelog` job in
`tags.yaml`:
1. Checks out the `main` branch with full history and tags
2. Verifies that a changelog file doesn't already exist in
`docs/changelogs/`
3. Installs GitHub Copilot CLI (`@github/copilot` npm package)
4. Runs Copilot CLI in non-interactive mode (`-p` flag) with
`--allow-all-tools --allow-all-paths` to generate the changelog
following the instructions in `docs/agents/changelog.md`
5. Commits the generated file to a `changelog-vX.Y.Z` branch and opens a
PR to `main`
### Authentication
- `COPILOT_GITHUB_TOKEN` secret — fine-grained PAT with **"Copilot
Requests: Read"** account permission, used to authenticate Copilot CLI
- `GH_PAT` secret — used by `gh` CLI inside the Copilot session to query
PR authors via GitHub API
### Release note
```release-note
[ci] Replaced Gemini with GitHub Copilot CLI for automatic changelog generation on release tags
```
- Add pattern rule for building cozypkg binaries per platform
(assets-cozypkg-<os>-<arch>) with checksums generation
- Add Version variable to cozypkg CLI injected via ldflags
- Split manifests into separate cozystack-crds.yaml and
cozystack-operator.yaml files
- Update CI workflow to handle CRDs and operator as separate artifacts
- Update e2e tests and upload script for new manifest structure
- Suppress git describe stderr when no tags exist
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
Replace unreliable getLatestRelease() API with semver-based max version
detection. After publishing a backport release, explicitly restore the
latest flag on the highest semver release to handle cases where GitHub
API ignores make_latest: 'false'.
Also remove dead code (unused steps) from tags.yaml workflow.
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
Allows maintainers to trigger test rerun by commenting /retest on a PR.
The workflow finds the latest run for the PR and reruns starting from
the "Prepare environment" job, skipping the build step.
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
actions/checkout configures http.extraheader with GITHUB_TOKEN which
takes priority over URL credentials. This caused tag pushes to
authenticate as github-actions instead of cozystack-bot, preventing
the Versioned Tag workflow from being triggered.
Co-Authored-By: Claude <noreply@anthropic.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
This PR adds a new GitHub workflow that automatically creates patch
releases for maintenance branches.
## What it does
- Runs daily at 2:00 AM CET (1:00 UTC)
- Checks all `release-X.Y` branches
- For each branch, finds the latest published release with tag `vX.Y.Z`
(without suffixes like -rc, -alpha, -beta)
- If new commits exist after the release, creates a new tag `vX.Y.Z+1`
and force-pushes it
- This triggers the existing tag workflow to build and create a release
PR
## Why releases instead of tags
The workflow checks published releases (not just tags) because if a
release PR hasn't been merged yet, the workflow should run again the
next day and move the tag to newer commits if they exist.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Chores**
* Automated patch release workflow configured for release branches,
enabling automatic version tagging when new commits are detected.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
This PR adds a GitHub Actions workflow that automatically updates
release notes from changelog files when changes are merged to main.
The workflow:
- Triggers on push to main branch
- Processes up to 30 releases from the first page
- For each release, checks if a corresponding changelog file exists in
`docs/changelogs/`
- Updates the release notes with the changelog content if it exists and
differs from the current content
- Skips releases that are already up to date to avoid unnecessary API
calls
This automates the process of keeping release notes synchronized with
changelog files.
<!-- This is an auto-generated comment: release notes by coderabbit.ai
-->
## Summary by CodeRabbit
* **Chores**
* Automated workflow added to synchronize GitHub releases with local
changelog files, updating release notes only when content differs.
* **Documentation**
* Changelogs and release notes reorganized and expanded with improved
sectioning and new tooling/documentation entries.
* **New Features**
* Added VM disk SVG icon entry under Features/Improvements.
* **Bug Fixes**
* Pinned CoreDNS image tag for reproducible deployments.
* Fixed a documentation typo that prevented a component from displaying
in the web UI.
<sub>✏️ Tip: You can customize this high-level summary in your review
settings.</sub>
<!-- end of auto-generated comment: release notes by coderabbit.ai -->
## What this PR does
The cozy-lib library package got complicated enough to warrant its own
unit tests. Since unit tests are a "good thing" (tm), a somewhat generic
framework for running all kinds of unit tests was introduced into the CI
pipeline and Makefile targets. For now all it runs is `make test`
against the `packages/{library,apps,system,extra}/*` directories,
wherever a `test` target is present in the Makefile, and for now this is
only for the `cozy-lib` Helm library chart.
### Release note
```release-note
[ci,dx] Introduce a scaffold for running unit tests locally and in CI
and add the first unit tests for the cozy-lib helper Helm chart.
```
Signed-off-by: Timofei Larkin <lllamnyp@gmail.com>
This patch sources the REGISTRY env var from GitHub actions variables
instead of secrets, so pull requests from forked repos work correctly.
```release-note
[ci] Source the REGISTRY env var from actions' variables, not secrets,
so external pull requests can work.
```
Signed-off-by: Timofei Larkin <lllamnyp@gmail.com>
Use https://github.com/cozystack/cozyvalues-gen for three apps:
- apps/postgres
- apps/virtual-machine
- extra/monitoring
Changes:
- Add type and enum definitions to values.yaml.
- Update READMEs with new information.
- Update values.schema.json with definitions for children objects,
allowing precise UI customization. Add regexp for specific types
such as resources: CPU like `500m` and RAM like `4GiB`.
- Remove direct injections with `yq` from Makefiles where they're not
needed anymore.
Co-authored-by: Nick Volynkin <nick.volynkin@gmail.com>
Signed-off-by: Andrei Kvapil <kvapss@gmail.com>
Signed-off-by: Nick Volynkin <nick.volynkin@gmail.com>
* Simplify test discovery logic in workflow.
* Delete Clickhouse after successful test.
* Separate two k8s tests into separate jobs.
Signed-off-by: Timofei Larkin <lllamnyp@gmail.com>
Changing the container registry from GHCR to OCIR will help with more
flexibe image retention policies and removes the restrictions on the
GitHub token when contributors submit PRs from forks. Release PRs remain
on GHCR, as before.
Signed-off-by: Timofei Larkin <lllamnyp@gmail.com>
