mirror of
https://github.com/ruvnet/RuView.git
synced 2026-04-28 14:09:33 +00:00
9648a47fdc
Introduces a 5-layer firmware kernel that reframes the existing ESP32
modules as components of a chipset-agnostic architecture and authorizes
adaptive control + a compact feature-state stream as the default upstream.
Layers:
L1 Radio Abstraction Layer — rv_radio_ops_t vtable + ESP32 binding
L2 Adaptive Controller — fast/medium/slow loops (200ms/1s/30s)
L3 Mesh Sensing Plane — anchor/observer/relay/coordinator (spec)
L4 On-device Feature Extr. — rv_feature_state_t (magic 0xC5110006)
L5 Rust handoff — feature_state default; debug raw gated
Files:
docs/adr/ADR-081-adaptive-csi-mesh-firmware-kernel.md (new)
firmware/esp32-csi-node/main/rv_radio_ops.h (new)
firmware/esp32-csi-node/main/rv_radio_ops_esp32.c (new)
firmware/esp32-csi-node/main/rv_feature_state.{h,c} (new)
firmware/esp32-csi-node/main/adaptive_controller.{h,c} (new)
firmware/esp32-csi-node/main/main.c (wire L1+L2)
firmware/esp32-csi-node/main/CMakeLists.txt (add 4 sources)
firmware/esp32-csi-node/main/Kconfig.projbuild (controller knobs)
CHANGELOG.md (Unreleased)
Default policy is conservative: enable_channel_switch and
enable_role_change are off, so behavior matches today's firmware
unless an operator opts in via menuconfig. The pure
adaptive_controller_decide() is exposed for offline unit tests.
Reuses (does not rewrite): csi_collector, edge_processing (ADR-039),
swarm_bridge (ADR-066), secure_tdm (ADR-032), wasm_runtime (ADR-040).
325 lines
9.4 KiB
Text
325 lines
9.4 KiB
Text
menu "CSI Node Configuration"
|
|
|
|
config CSI_NODE_ID
|
|
int "Node ID (0-255)"
|
|
default 1
|
|
range 0 255
|
|
help
|
|
Unique identifier for this ESP32 CSI node.
|
|
|
|
config CSI_TARGET_IP
|
|
string "Aggregator IP address"
|
|
default "192.168.1.100"
|
|
help
|
|
IP address of the UDP aggregator host.
|
|
|
|
config CSI_TARGET_PORT
|
|
int "Aggregator UDP port"
|
|
default 5005
|
|
range 1024 65535
|
|
help
|
|
UDP port the aggregator listens on.
|
|
|
|
config CSI_WIFI_SSID
|
|
string "WiFi SSID"
|
|
default "wifi-densepose"
|
|
help
|
|
SSID of the WiFi network to connect to.
|
|
|
|
config CSI_WIFI_PASSWORD
|
|
string "WiFi Password"
|
|
default ""
|
|
help
|
|
Password for the WiFi network. Leave empty for open networks.
|
|
|
|
config CSI_WIFI_CHANNEL
|
|
int "WiFi Channel (1-13)"
|
|
default 6
|
|
range 1 13
|
|
help
|
|
WiFi channel to listen on for CSI data.
|
|
|
|
endmenu
|
|
|
|
menu "Edge Intelligence (ADR-039)"
|
|
|
|
config EDGE_TIER
|
|
int "Edge processing tier (0=raw, 1=basic, 2=full)"
|
|
default 2
|
|
range 0 2
|
|
help
|
|
0 = Raw passthrough (no on-device DSP).
|
|
1 = Basic presence/motion detection.
|
|
2 = Full pipeline (vitals, compression, multi-person).
|
|
|
|
config EDGE_VITAL_INTERVAL_MS
|
|
int "Vitals packet send interval (ms)"
|
|
default 1000
|
|
range 100 10000
|
|
help
|
|
How often to send vitals packets over UDP.
|
|
|
|
config EDGE_TOP_K
|
|
int "Top-K subcarriers to track"
|
|
default 8
|
|
range 1 32
|
|
help
|
|
Number of highest-variance subcarriers to use for DSP.
|
|
|
|
config EDGE_FALL_THRESH
|
|
int "Fall detection threshold (x1000)"
|
|
default 15000
|
|
range 100 50000
|
|
help
|
|
Phase acceleration threshold for fall detection.
|
|
Value is divided by 1000 to get rad/s². Default 15000 = 15.0 rad/s².
|
|
Raise to reduce false positives in high-traffic environments.
|
|
Normal walking produces accelerations of 2-5 rad/s².
|
|
Stored as integer; divided by 1000 at runtime.
|
|
|
|
config EDGE_POWER_DUTY
|
|
int "Power duty cycle percentage"
|
|
default 100
|
|
range 10 100
|
|
help
|
|
Active duty cycle for battery-powered nodes.
|
|
100 = always on. 50 = active half the time.
|
|
|
|
endmenu
|
|
|
|
menu "Adaptive Controller (ADR-081)"
|
|
|
|
config ADAPTIVE_FAST_LOOP_MS
|
|
int "Fast loop period (ms)"
|
|
default 200
|
|
range 50 2000
|
|
help
|
|
Period of the fast control loop. The fast loop reads radio
|
|
health and edge-derived motion/presence/anomaly scores and
|
|
updates the active capture profile. Default 200 ms matches
|
|
the ADR-081 spec.
|
|
|
|
config ADAPTIVE_MEDIUM_LOOP_MS
|
|
int "Medium loop period (ms)"
|
|
default 1000
|
|
range 200 30000
|
|
help
|
|
Period of the medium control loop. The medium loop is where
|
|
channel selection and role transitions happen (when
|
|
enable_channel_switch / enable_role_change are on).
|
|
|
|
config ADAPTIVE_SLOW_LOOP_MS
|
|
int "Slow loop period (ms)"
|
|
default 30000
|
|
range 1000 300000
|
|
help
|
|
Period of the slow control loop. The slow loop publishes
|
|
HEALTH messages and may request CALIBRATION_START on
|
|
sustained drift.
|
|
|
|
config ADAPTIVE_AGGRESSIVE
|
|
bool "Aggressive adaptation"
|
|
default n
|
|
help
|
|
When enabled, the controller reacts to motion / anomaly
|
|
sooner and uses a tighter cadence in SENSE_ACTIVE. Default
|
|
off matches today's conservative behavior.
|
|
|
|
config ADAPTIVE_ENABLE_CHANNEL_SWITCH
|
|
bool "Allow controller to change WiFi channel"
|
|
default n
|
|
help
|
|
When disabled, the controller never calls set_channel() —
|
|
channel hopping (ADR-029) and channel override (ADR-060)
|
|
remain in charge. Enable only after Phase 3 follow-up
|
|
work has wired the channel-plan mesh message.
|
|
|
|
config ADAPTIVE_ENABLE_ROLE_CHANGE
|
|
bool "Allow controller to change mesh role"
|
|
default n
|
|
help
|
|
When disabled, the controller never advertises a different
|
|
role to the swarm bridge. Enable after the mesh-plane
|
|
ROLE_ASSIGN protocol is in place.
|
|
|
|
config ADAPTIVE_MOTION_THRESH_PERMIL
|
|
int "Motion threshold (per-mille)"
|
|
default 200
|
|
range 1 1000
|
|
help
|
|
Motion score above which the controller transitions to
|
|
SENSE_ACTIVE and selects RV_PROFILE_FAST_MOTION. Expressed
|
|
in per-mille (200 = 0.20).
|
|
|
|
config ADAPTIVE_ANOMALY_THRESH_PERMIL
|
|
int "Anomaly threshold (per-mille)"
|
|
default 600
|
|
range 1 1000
|
|
help
|
|
Anomaly score above which the controller transitions to
|
|
ALERT. Per-mille (600 = 0.60).
|
|
|
|
config ADAPTIVE_MIN_PKT_YIELD
|
|
int "Minimum packet yield before DEGRADED (pps)"
|
|
default 5
|
|
range 0 100
|
|
help
|
|
CSI callback rate (per second) below which the controller
|
|
falls back to DEGRADED mode and pins the radio to
|
|
RV_PROFILE_PASSIVE_LOW_RATE. 0 disables the degraded gate.
|
|
|
|
endmenu
|
|
|
|
menu "AMOLED Display (ADR-045)"
|
|
|
|
config DISPLAY_ENABLE
|
|
bool "Enable AMOLED display support"
|
|
default y
|
|
help
|
|
Enable RM67162 QSPI AMOLED display and LVGL UI.
|
|
Auto-detects at boot; gracefully skips if no display hardware.
|
|
Requires SPIRAM for frame buffers.
|
|
|
|
config DISPLAY_FPS_LIMIT
|
|
int "Display refresh rate limit (FPS)"
|
|
default 30
|
|
range 10 60
|
|
depends on DISPLAY_ENABLE
|
|
help
|
|
Maximum display refresh rate. Lower values save CPU.
|
|
|
|
config DISPLAY_BRIGHTNESS
|
|
int "Default backlight brightness (%)"
|
|
default 80
|
|
range 0 100
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_CS
|
|
int "QSPI CS GPIO"
|
|
default 6
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_CLK
|
|
int "QSPI CLK GPIO"
|
|
default 47
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_D0
|
|
int "QSPI D0 GPIO"
|
|
default 18
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_D1
|
|
int "QSPI D1 GPIO"
|
|
default 7
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_D2
|
|
int "QSPI D2 GPIO"
|
|
default 48
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_QSPI_D3
|
|
int "QSPI D3 GPIO"
|
|
default 5
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_TOUCH_SDA
|
|
int "Touch I2C SDA GPIO"
|
|
default 3
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_TOUCH_SCL
|
|
int "Touch I2C SCL GPIO"
|
|
default 2
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_TOUCH_INT
|
|
int "Touch INT GPIO"
|
|
default 21
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_TOUCH_RST
|
|
int "Touch RST GPIO"
|
|
default 17
|
|
depends on DISPLAY_ENABLE
|
|
|
|
config DISPLAY_BL_PIN
|
|
int "Backlight PWM GPIO"
|
|
default 38
|
|
depends on DISPLAY_ENABLE
|
|
|
|
endmenu
|
|
|
|
menu "WASM Programmable Sensing (ADR-040)"
|
|
|
|
config WASM_ENABLE
|
|
bool "Enable WASM Tier 3 runtime"
|
|
default y
|
|
help
|
|
Enable the WASM3 interpreter for hot-loadable sensing modules.
|
|
Requires WASM3 source in components/wasm3/wasm3-src/.
|
|
Adds ~120 KB flash and ~20 KB SRAM.
|
|
|
|
config WASM_MAX_MODULES
|
|
int "Maximum concurrent WASM modules"
|
|
default 4
|
|
range 1 8
|
|
help
|
|
Number of WASM module slots. Each slot can hold one
|
|
loaded .wasm binary (stored in PSRAM, max 128 KB each).
|
|
|
|
config WASM_VERIFY_SIGNATURE
|
|
bool "Require Ed25519 signature verification for WASM uploads"
|
|
default y
|
|
help
|
|
When enabled, uploaded .wasm binaries must include a valid
|
|
Ed25519 signature. Uses the same signing key as OTA firmware.
|
|
Disable with provision.py --no-wasm-verify for lab/dev use.
|
|
|
|
config WASM_TIMER_INTERVAL_MS
|
|
int "WASM on_timer() interval (ms)"
|
|
default 1000
|
|
range 100 60000
|
|
help
|
|
How often to call on_timer() on running WASM modules.
|
|
Default 1000 ms = 1 Hz.
|
|
|
|
endmenu
|
|
|
|
menu "Mock CSI (QEMU Testing)"
|
|
config CSI_MOCK_ENABLED
|
|
bool "Enable mock CSI generator (for QEMU testing)"
|
|
default n
|
|
help
|
|
Replace real WiFi CSI with synthetic frame generator.
|
|
Use with QEMU emulation for automated testing.
|
|
|
|
config CSI_MOCK_SKIP_WIFI_CONNECT
|
|
bool "Skip WiFi STA connection"
|
|
depends on CSI_MOCK_ENABLED
|
|
default y
|
|
help
|
|
Skip WiFi initialization when using mock CSI.
|
|
|
|
config CSI_MOCK_SCENARIO
|
|
int "Mock scenario (0-9, 255=all)"
|
|
depends on CSI_MOCK_ENABLED
|
|
default 255
|
|
range 0 255
|
|
help
|
|
0=empty, 1=static, 2=walking, 3=fall, 4=multi-person,
|
|
5=channel-sweep, 6=mac-filter, 7=ring-overflow,
|
|
8=boundary-rssi, 9=zero-length, 255=run all.
|
|
|
|
config CSI_MOCK_SCENARIO_DURATION_MS
|
|
int "Scenario duration (ms)"
|
|
depends on CSI_MOCK_ENABLED
|
|
default 5000
|
|
range 1000 60000
|
|
|
|
config CSI_MOCK_LOG_FRAMES
|
|
bool "Log every mock frame (verbose)"
|
|
depends on CSI_MOCK_ENABLED
|
|
default n
|
|
endmenu
|