mirror of
https://github.com/ruvnet/RuView.git
synced 2026-07-10 01:30:01 +00:00
7831f29436
Some checks failed
Security Scanning / Dependency Vulnerability Scan (push) Has been cancelled
Continuous Deployment / Pre-deployment Checks (push) Has been cancelled
Firmware CI / Verify version.txt matches release tag (push) Has been cancelled
Firmware CI / Build firmware (esp32s3 / 4mb) (push) Has been cancelled
Firmware CI / Build firmware (esp32c6 / c6-4mb) (push) Has been cancelled
Firmware CI / Build firmware (esp32s3 / 8mb) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / Build Espressif QEMU (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / Fuzz Testing (ADR-061 Layer 6) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / NVS Matrix Generation (push) Has been cancelled
Fix-Marker Regression Guard / Verify fix markers (push) Has been cancelled
Security Scanning / Static Application Security Testing (push) Has been cancelled
Security Scanning / Container Security Scan (push) Has been cancelled
Security Scanning / Infrastructure Security Scan (push) Has been cancelled
Security Scanning / Secret Scanning (push) Has been cancelled
Security Scanning / License Compliance Scan (push) Has been cancelled
Security Scanning / Security Policy Compliance (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (boundary-max) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (boundary-min) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (default) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (edge-tier0) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (edge-tier1) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (full-adr060) (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / QEMU Test (tdm-3node) (push) Has been cancelled
Continuous Deployment / Deploy to Staging (push) Has been cancelled
Continuous Deployment / Deploy to Production (push) Has been cancelled
Continuous Deployment / Rollback Deployment (push) Has been cancelled
Continuous Deployment / Post-deployment Monitoring (push) Has been cancelled
Continuous Deployment / Notify Deployment Status (push) Has been cancelled
Firmware QEMU Tests (ADR-061) / Swarm Test (ADR-062) (push) Has been cancelled
Security Scanning / Security Report (push) Has been cancelled
Bug #2 (root cause): LD2410 probe-detection matched only the 4-byte head 0xF4F3F2F1, so a floating UART at 256000 baud could phantom-detect a sensor and spawn a UART task. Now requires a full validated report frame (head + sane length + tail 0xF8F7F6F5), extracted to mmwave_detect.h and shared with a host unit test (test_mmwave_detect.c, 8 vectors) so firmware and test can't diverge. Matches the validate-before-trust approach used for MR60 in #1107. Bug #1: sendto ENOMEM used a fixed 100 ms backoff too short to drain sustained lwIP/WiFi buffer pressure, so a node could stay stuck. Now exponential (100->200->...->2000 ms per consecutive ENOMEM, reset on first successful send). Removing the phantom LD2410 task (bug #2) also removes the extra load that tipped the reporter's tier-2 node into the stuck state. Validated on ESP32-S3 QFN56 rev v0.2 (the reporter's silicon): tier-2 streams ~100 frames/s with no stuck ENOMEM and correctly reports no mmWave (no phantom). LD2410 predicate truth table proven (head-without-tail REJECTED). Could not reproduce the reporter's environment-specific floating-pin noise, so the deterministic proof is the host unit test. |
||
|---|---|---|
| .. | ||
| corpus | ||
| stubs | ||
| capture-3board-experiment.py | ||
| fuzz_csi_serialize.c | ||
| fuzz_edge_enqueue.c | ||
| fuzz_nvs_config.c | ||
| Makefile | ||
| test_adr110_encoding.c | ||
| test_mmwave_detect.c | ||
| test_vitals_count_presence.c | ||