Claude
|
d53e29506e
|
ADR-081: implement Layers 1/2/4 end-to-end + host tests + QEMU hooks
Turns the ADR-081 scaffolding into a working adaptive CSI mesh kernel:
Layer 1 radio abstraction has an ESP32 binding and a mock binding; Layer 2
adaptive controller runs on FreeRTOS timers; Layer 4 feature-state packet
is emitted at 5 Hz by default, replacing raw ADR-018 CSI as the default
upstream.
New files:
firmware/esp32-csi-node/main/adaptive_controller_decide.c (pure policy)
firmware/esp32-csi-node/main/rv_radio_ops_mock.c (QEMU binding)
firmware/esp32-csi-node/tests/host/Makefile (host tests)
firmware/esp32-csi-node/tests/host/test_adaptive_controller.c
firmware/esp32-csi-node/tests/host/test_rv_feature_state.c
firmware/esp32-csi-node/tests/host/esp_err.h (shim)
firmware/esp32-csi-node/tests/host/.gitignore
Modified:
adaptive_controller.c — includes pure decide.c; emit_feature_state()
wired into fast loop (200 ms = 5 Hz)
rv_radio_ops_esp32.c — get_health() fills pkt_yield + send_fail
csi_collector.{c,h} — pkt_yield/send_fail accessors (ADR-081 L1)
rv_feature_state.h — packed size corrected to 60 bytes
(was incorrectly 80 in initial commit)
main.c — mock binding registered under mock CSI
CMakeLists.txt — rv_radio_ops_mock.c under CSI_MOCK_ENABLED
scripts/validate_qemu_output.py — 3 new ADR-081 checks (17/18/19)
docs/adr/ADR-081-*.md — status → Accepted (partial);
implementation-status matrix; measured
benchmarks (decide 3.2 ns, CRC32 614 ns);
bandwidth 300 B/s @ 5 Hz (99.7% vs raw);
verification section
CHANGELOG.md — artifact-level entries
Tests (host, gcc -O2 -std=c11):
test_adaptive_controller: 18/18 pass, decide() = 3.2 ns/call
test_rv_feature_state: 15/15 pass, CRC32(56 B) = 614 ns/pkt, 87 MB/s
sizeof(rv_feature_state_t) == 60 asserted
IEEE CRC32 known vectors verified
Deferred (tracked in ADR-081 roadmap Phase 3/4):
Layer 3 mesh-plane message types, role-assignment FSM, Rust-side mirror
trait in crates/wifi-densepose-hardware/src/radio_ops.rs.
|
2026-04-19 03:43:08 +00:00 |
|
Claude
|
9648a47fdc
|
ADR-081: adaptive CSI mesh firmware kernel + scaffolding
Introduces a 5-layer firmware kernel that reframes the existing ESP32
modules as components of a chipset-agnostic architecture and authorizes
adaptive control + a compact feature-state stream as the default upstream.
Layers:
L1 Radio Abstraction Layer — rv_radio_ops_t vtable + ESP32 binding
L2 Adaptive Controller — fast/medium/slow loops (200ms/1s/30s)
L3 Mesh Sensing Plane — anchor/observer/relay/coordinator (spec)
L4 On-device Feature Extr. — rv_feature_state_t (magic 0xC5110006)
L5 Rust handoff — feature_state default; debug raw gated
Files:
docs/adr/ADR-081-adaptive-csi-mesh-firmware-kernel.md (new)
firmware/esp32-csi-node/main/rv_radio_ops.h (new)
firmware/esp32-csi-node/main/rv_radio_ops_esp32.c (new)
firmware/esp32-csi-node/main/rv_feature_state.{h,c} (new)
firmware/esp32-csi-node/main/adaptive_controller.{h,c} (new)
firmware/esp32-csi-node/main/main.c (wire L1+L2)
firmware/esp32-csi-node/main/CMakeLists.txt (add 4 sources)
firmware/esp32-csi-node/main/Kconfig.projbuild (controller knobs)
CHANGELOG.md (Unreleased)
Default policy is conservative: enable_channel_switch and
enable_role_change are off, so behavior matches today's firmware
unless an operator opts in via menuconfig. The pure
adaptive_controller_decide() is exposed for offline unit tests.
Reuses (does not rewrite): csi_collector, edge_processing (ADR-039),
swarm_bridge (ADR-066), secure_tdm (ADR-032), wasm_runtime (ADR-040).
|
2026-04-19 03:14:04 +00:00 |
|