mirror of
https://github.com/smxi/inxi.git
synced 2024-11-16 16:21:39 +00:00
0739e956b9
This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
17136 lines
531 KiB
Perl
Executable file
17136 lines
531 KiB
Perl
Executable file
#!/usr/bin/env perl
|
|
## infobash: Copyright (C) 2005-2007 Michiel de Boer aka locsmif
|
|
## inxi: Copyright (C) 2008-2018 Harald Hope
|
|
## Additional features (C) Scott Rogers - kde, cpu info
|
|
## Further fixes (listed as known): Horst Tritremmel <hjt at sidux.com>
|
|
## Steven Barrett (aka: damentz) - usb audio patch; swap percent used patch
|
|
## Jarett.Stevens - dmidecode -M patch for older systems with the /sys
|
|
##
|
|
## License: GNU GPL v3 or greater
|
|
##
|
|
## You should have received a copy of the GNU General Public License
|
|
## along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
##
|
|
## If you don't understand what Free Software is, please read (or reread)
|
|
## this page: http://www.gnu.org/philosophy/free-sw.html
|
|
|
|
use strict;
|
|
use warnings;
|
|
# use diagnostics;
|
|
use 5.008;
|
|
|
|
use Cwd qw(abs_path); # qw(abs_path);#abs_path realpath getcwd
|
|
use Data::Dumper qw(Dumper); # print_r
|
|
use File::Find;
|
|
use Getopt::Long qw(GetOptions);
|
|
# Note: default auto_abbrev is enabled, that's fine
|
|
Getopt::Long::Configure ('bundling', 'no_ignore_case',
|
|
'no_getopt_compat', 'no_auto_abbrev','pass_through');
|
|
use POSIX qw(uname strftime ttyname);
|
|
# use feature qw(state);
|
|
|
|
## INXI INFO ##
|
|
my $self_name='inxi';
|
|
my $self_version='3.0.10';
|
|
my $self_date='2018-05-21';
|
|
my $self_patch='00';
|
|
## END INXI INFO ##
|
|
|
|
### INITIALIZE VARIABLES ###
|
|
|
|
## Self data
|
|
my ($self_path, $user_config_dir, $user_config_file,$user_data_dir);
|
|
|
|
## Debuggers
|
|
my $debug=0;
|
|
my (@t0,$end,$start,$fh_l,$log_file); # log file handle, file
|
|
my ($b_hires,$t1,$t2,$t3) = (0,0,0,0);
|
|
# NOTE: redhat removed HiRes from Perl Core Modules. Why? who knows.
|
|
if (eval {require Time::HiRes}){
|
|
Time::HiRes->import('gettimeofday','tv_interval','usleep');
|
|
$b_hires = 1;
|
|
}
|
|
@t0 = eval 'Time::HiRes::gettimeofday()' if $b_hires; # let's start it right away
|
|
## Hashes
|
|
my ( %alerts,%client,%colors,%dl,%files,%rows,%system_files,%use );
|
|
|
|
## Arrays
|
|
# ps_aux is full output, ps_cmd is only the last 10 to last
|
|
my (@app,@dmesg_boot,@dmi,@gpudata,@ifs,@ifs_bsd,@paths,@pci,@ps_aux,@ps_cmd,
|
|
@sysctl,@sysctl_battery,@sysctl_sensors,@sysctl_machine,@uname,@usb);
|
|
## Disk arrays
|
|
my (@dm_boot_disk,@dm_boot_optical,@glabel,@gpart,@labels,@lsblk,@partitions,
|
|
@raid,@sysctl_disks,@uuids);
|
|
my @test = (0,0,0,0,0);
|
|
|
|
## Booleans
|
|
my ($b_arm,$b_console_irc,$b_debug_gz,$b_display,$b_dmesg_boot_check,$b_dmi,
|
|
$b_dmidecode_force,$b_fake_bsd,$b_fake_dboot,$b_fake_pciconf,$b_fake_sysctl,
|
|
$b_fake_usbdevs,$b_force_display,$b_gpudata,$b_irc,$b_log,$b_log_colors,
|
|
$b_log_full,$b_man,$b_mem,$b_pci,$b_root,$b_running_in_display,$b_sudo,
|
|
$b_sysctl,$b_usb_check);
|
|
## Disk checks
|
|
my ($b_dm_boot_disk,$b_dm_boot_optical,$b_glabel,$b_label_uuid,$b_lsblk,
|
|
$b_partitions,$b_raid);
|
|
my ($b_sysctl_disk,$b_update,$b_weather) = (1,1,1);
|
|
|
|
## System
|
|
my ($bsd_type,$language,$os) = ('','','');
|
|
my ($bits_sys);
|
|
my ($cpu_sleep,$dl_timeout,$limit,$ps_count,$usb_level) = (0.35,4,10,5,0);
|
|
my $sensors_cpu_nu = 0;
|
|
my $weather_unit='mi';
|
|
|
|
## Tools
|
|
my ($display,$ftp_alt,$tty_session);
|
|
my ($display_opt,$sudo) = ('','');
|
|
|
|
## Output
|
|
my $extra = 0;# supported values: 0-3
|
|
my $filter_string = '<filter>';
|
|
my $line1 = "----------------------------------------------------------------------\n";
|
|
my $line2 = "======================================================================\n";
|
|
my $line3 = "----------------------------------------\n";
|
|
my ($output_file,$output_type) = ('','screen');
|
|
my $prefix = 0; # for the primiary row hash key prefix
|
|
|
|
# these will assign a separator to non irc states. Important! Using ':' can
|
|
# trigger stupid emoticon. Note: SEP1/SEP2 from short form not used anymore.
|
|
# behaviors in output on IRC, so do not use those.
|
|
my %sep = (
|
|
's1-irc' => ':',
|
|
's1-console' => ':',
|
|
's2-irc' => '',
|
|
's2-console' => ':',
|
|
);
|
|
|
|
my %show = ('host' => 1);
|
|
|
|
my %size = (
|
|
'console' => 115,
|
|
# Default indentation level. NOTE: actual indent is 1 greater to allow for
|
|
# spacing
|
|
'indent' => 11,
|
|
'indent-min' => 90,
|
|
'irc' => 100, # shorter because IRC clients have nick lists etc
|
|
'max' => 0,
|
|
'no-display' => 130,
|
|
# these will be set dynamically in set_display_width()
|
|
'term' => 80,
|
|
'term-lines' => 100,
|
|
);
|
|
|
|
## debug temp tools
|
|
$client{'test-konvi'} = 0;
|
|
|
|
########################################################################
|
|
#### STARTUP
|
|
########################################################################
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### MAIN
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub main {
|
|
# print Dumper \@ARGV;
|
|
eval $start if $b_log;
|
|
initialize();
|
|
## use for start client debugging
|
|
# $debug = 10;
|
|
# set_debugger(); # for debugging of konvi issues
|
|
#my $ob_start = StartClient->new();
|
|
#$ob_start->get_client_data();
|
|
StartClient::get_client_data();
|
|
# print_line( Dumper \%client);
|
|
get_options();
|
|
set_debugger(); # right after so it's set
|
|
check_tools();
|
|
set_colors();
|
|
set_sep();
|
|
# print download_file('stdout','https://') . "\n";
|
|
generate_lines();
|
|
eval $end if $b_log;
|
|
cleanup();
|
|
# weechat's executor plugin forced me to do this, and rightfully so,
|
|
# because else the exit code from the last command is taken..
|
|
exit 0;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### INITIALIZE
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub initialize {
|
|
set_os();
|
|
set_path();
|
|
set_user_paths();
|
|
set_basics();
|
|
system_files('set');
|
|
get_configs();
|
|
# set_downloader();
|
|
set_display_width('live');
|
|
}
|
|
|
|
sub check_tools {
|
|
my ($action,$program,$message,@data,%commands,%hash);
|
|
if ( $b_dmi ){
|
|
$action = 'use';
|
|
if ($program = check_program('dmidecode')) {
|
|
@data = grabber("$program -t chassis -t baseboard -t processor 2>&1");
|
|
if (scalar @data < 15){
|
|
if ($b_root) {
|
|
foreach (@data){
|
|
if ($_ =~ /No SMBIOS/i){
|
|
$action = 'smbios';
|
|
last;
|
|
}
|
|
elsif ($_ =~ /^\/dev\/mem: Operation/i){
|
|
$action = 'no-data';
|
|
last;
|
|
}
|
|
else {
|
|
$action = 'unknown-error';
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
if (grep { $_ =~ /^\/dev\/mem: Permission/i } @data){
|
|
$action = 'permissions';
|
|
}
|
|
else {
|
|
$action = 'unknown-error';
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$action = 'missing';
|
|
}
|
|
%hash = (
|
|
'dmidecode' => {
|
|
'action' => $action,
|
|
'missing' => 'Required program dmidecode not available',
|
|
'permissions' => 'Unable to run dmidecode. Are you root?',
|
|
'smbios' => 'No SMBIOS data for dmidecode to process',
|
|
'no-data' => 'dmidecode is not allowed to read /dev/mem',
|
|
'unknown-error' => 'dmidecode was unable to generate data',
|
|
},
|
|
);
|
|
%alerts = (%alerts, %hash);
|
|
}
|
|
# note: gnu/linux has sysctl so it may be used that for something if present
|
|
# there is lspci for bsds so doesn't hurt to check it
|
|
if ($b_pci || $b_sysctl){
|
|
if (!$bsd_type){
|
|
if ($b_pci ){
|
|
%hash = ('lspci' => '-n',);
|
|
%commands = (%commands,%hash);
|
|
}
|
|
}
|
|
else {
|
|
if ($b_pci ){
|
|
%hash = ('pciconf' => '-l',);
|
|
%commands = (%commands,%hash);
|
|
}
|
|
if ($b_sysctl ){
|
|
# note: there is a case of kernel.osrelease but it's a linux distro
|
|
%hash = ('sysctl' => 'kern.osrelease',);
|
|
%commands = (%commands,%hash);
|
|
}
|
|
}
|
|
foreach ( keys %commands ){
|
|
$action = 'use';
|
|
if ($program = check_program($_)) {
|
|
# > 0 means error in shell
|
|
#my $cmd = "$program $commands{$_} >/dev/null";
|
|
#print "$cmd\n";
|
|
$action = 'permissions' if system("$program $commands{$_} >/dev/null 2>&1");
|
|
}
|
|
else {
|
|
$action = 'missing';
|
|
}
|
|
%hash = (
|
|
$_ => {
|
|
'action' => $action,
|
|
'missing' => "Missing system tool: $_. Output will be incomplete",
|
|
'permissions' => "Unable to run $_. Root required?",
|
|
},
|
|
);
|
|
%alerts = (%alerts, %hash);
|
|
}
|
|
}
|
|
%commands = ();
|
|
if ( $show{'sensor'} ){
|
|
%commands = ('sensors' => 'linux',);
|
|
}
|
|
# note: lsusb ships in FreeBSD ports sysutils/usbutils
|
|
if ( $usb_level ){
|
|
%hash = ('lsusb' => 'all',);
|
|
%commands = (%commands,%hash);
|
|
%hash = ('usbdevs' => 'bsd',);
|
|
%commands = (%commands,%hash);
|
|
}
|
|
if ($show{'ip'} || ($bsd_type && $show{'network-advanced'})){
|
|
%hash = (
|
|
'ip' => 'linux',
|
|
'ifconfig' => 'all',
|
|
);
|
|
%commands = (%commands,%hash);
|
|
}
|
|
foreach ( keys %commands ){
|
|
$action = 'use';
|
|
$message = 'Present and working';
|
|
if ( ($commands{$_} eq 'linux' && $os ne 'linux' ) || ($commands{$_} eq 'bsd' && $os eq 'linux' ) ){
|
|
$message = "No " . ucfirst($os) . " support. Is a comparable $_ tool available?";
|
|
$action = 'platform';
|
|
}
|
|
elsif (!check_program($_)){
|
|
$message = "Required tool $_ not installed. Check --recommends";
|
|
$action = 'missing';
|
|
}
|
|
%hash = (
|
|
$_ => {
|
|
'action' => $action,
|
|
'missing' => $message,
|
|
'platform' => $message,
|
|
},
|
|
);
|
|
%alerts = (%alerts, %hash);
|
|
}
|
|
# print Dumper \%alerts;
|
|
# only use sudo if not root, -n option requires sudo -V 1.7 or greater.
|
|
# for some reason sudo -n with < 1.7 in Perl does not print to stderr
|
|
# sudo will just error out which is the safest course here for now,
|
|
# otherwise that interactive sudo password thing is too annoying
|
|
# important: -n makes it non interactive, no prompt for password
|
|
if (!$b_root && $b_sudo && (my $path = main::check_program('sudo') )) {
|
|
my @data = program_values('sudo');
|
|
my $version = program_version($path,$data[0],$data[1],$data[2],$data[5]);
|
|
$version =~ s/^([0-9]+\.[0-9]+).*/$1/;
|
|
$sudo = "$path -n " if $version >= 1.7;
|
|
}
|
|
set_fake_tools() if $b_fake_bsd;
|
|
}
|
|
|
|
# args: 1 - desktop/app command for --version; 2 - search string;
|
|
# 3 - space print number; 4 - [optional] version arg: -v, version, etc
|
|
# 5 - [optional] exit first find 0/1; 6 - [optional] 0/1 stderr output
|
|
sub set_basics {
|
|
### LOCALIZATION - DO NOT CHANGE! ###
|
|
# set to default LANG to avoid locales errors with , or .
|
|
# Make sure every program speaks English.
|
|
$ENV{'LANG'}='C';
|
|
$ENV{'LC_ALL'}='C';
|
|
# remember, perl uses the opposite t/f return as shell!!!
|
|
$b_irc = ( system('tty >/dev/null') ) ? 1 : 0;
|
|
# print "birc: $b_irc\n";
|
|
$b_display = ( $ENV{'DISPLAY'} ) ? 1 : 0;
|
|
$b_root = ( $ENV{'HOME'} eq '/root' ) ? 1 : 0;
|
|
$dl{'dl'} = 'curl';
|
|
$dl{'curl'} = 1;
|
|
$dl{'tiny'} = 1; # note: two modules needed, tested for in set_downloader
|
|
$dl{'wget'} = 1;
|
|
$dl{'fetch'} = 1;
|
|
$client{'console-irc'} = 0;
|
|
$client{'dcop'} = (check_program('dcop')) ? 1 : 0;
|
|
$client{'qdbus'} = (check_program('qdbus')) ? 1 : 0;
|
|
$client{'konvi'} = 0;
|
|
$client{'name'} = '';
|
|
$client{'name-print'} = '';
|
|
$client{'su-start'} = ''; # shows sudo/su
|
|
$client{'version'} = '';
|
|
$colors{'default'} = 2;
|
|
}
|
|
|
|
# args: $1 - default OR override default cols max integer count. $_[0]
|
|
# is the display width override.
|
|
sub set_display_width {
|
|
my ($width) = @_;
|
|
if ( $width eq 'live' ){
|
|
## sometimes tput will trigger an error (mageia) if irc client
|
|
if ( ! $b_irc ){
|
|
if ( check_program('tput') ) {
|
|
# trips error if use qx()...
|
|
chomp($size{'term'}=qx{tput cols});
|
|
chomp($size{'term-lines'}=qx{tput lines});
|
|
$size{'term-cols'} = $size{'term'};
|
|
}
|
|
# print "tc: $size{'term'} cmc: $size{'console'}\n";
|
|
# double check, just in case it's missing functionality or whatever
|
|
if ( $size{'term'} == 0 || $size{'term'} !~ /\d/ ){
|
|
$size{'term'}=80;
|
|
# we'll be using this for terminal dimensions later so don't set default.
|
|
# $size{'term-lines'}=100;
|
|
}
|
|
}
|
|
# this lets you set different size for in or out of display server
|
|
# if ( ! $b_running_in_display && $configs{'COLS_MAX_NO_DISPLAY'} != 0 ){
|
|
# $size{'console'}=$configs{'COLS_MAX_NO_DISPLAY'};
|
|
# }
|
|
# term_cols is set in top globals, using tput cols
|
|
# print "tc: $size{'term'} cmc: $size{'console'}\n";
|
|
if ( $size{'term'} < $size{'console'} ){
|
|
$size{'console'}=$size{'term'};
|
|
}
|
|
# adjust, some terminals will wrap if output cols == term cols
|
|
$size{'console'}=( $size{'console'} - 2 );
|
|
# echo cmc: $size{'console'}
|
|
# comes after source for user set stuff
|
|
if ( ! $b_irc ){
|
|
$size{'max'}=$size{'console'};
|
|
}
|
|
else {
|
|
$size{'max'}=$size{'irc'};
|
|
}
|
|
}
|
|
else {
|
|
$size{'max'}=$width;
|
|
}
|
|
# print "tc: $size{'term'} cmc: $size{'console'} cm: $size{'max'}\n";
|
|
}
|
|
|
|
# only for dev/debugging BSD
|
|
sub set_fake_tools {
|
|
$system_files{'dmesg-boot'} = '/var/run/dmesg.boot' if $b_fake_dboot;
|
|
$alerts{'pciconf'} = ({'action' => 'use'}) if $b_fake_pciconf;
|
|
$alerts{'sysctl'} = ({'action' => 'use'}) if $b_fake_sysctl;
|
|
if ($b_fake_usbdevs ){
|
|
$alerts{'usbdevs'} = ({'action' => 'use'});
|
|
$alerts{'lsusb'} = ({
|
|
'action' => 'missing',
|
|
'missing' => 'Required program lsusb not available',
|
|
});
|
|
}
|
|
}
|
|
|
|
# NOTE: most tests internally are against !$bsd_type
|
|
sub set_os {
|
|
@uname = uname();
|
|
$os = lc($uname[0]);
|
|
my $type = lc($uname[-1]);
|
|
$b_arm = 1 if $type =~ /arm|aarch/;
|
|
if ($type =~ /(armv[1-7]|aarch32|sparc_v9)/){
|
|
$bits_sys = 32;
|
|
}
|
|
elsif ($type =~ /(alpha|64)/){
|
|
$bits_sys = 64;
|
|
}
|
|
if ( $os =~ /(bsd|dragonfly|darwin)/ ){
|
|
if ( $os =~ /openbsd/ ){
|
|
$os = 'openbsd';
|
|
}
|
|
elsif ($os =~ /darwin/){
|
|
$os = 'darwin';
|
|
}
|
|
if ($os =~ /kfreebsd/){
|
|
$bsd_type = 'debian-bsd';
|
|
}
|
|
else {
|
|
$bsd_type = $os;
|
|
}
|
|
}
|
|
}
|
|
|
|
# This data is hard set top of program but due to a specific project's
|
|
# foolish idea that ignoring the FSH totally is somehow a positive step
|
|
# forwards for free software, we also have to padd the results with PATH.
|
|
sub set_path {
|
|
# Extra path variable to make execute failures less likely, merged below
|
|
my (@path);
|
|
@paths = qw(/sbin /bin /usr/sbin /usr/bin /usr/local/sbin /usr/local/bin /usr/X11R6/bin);
|
|
@path = split /:/, $ENV{'PATH'} if $ENV{'PATH'};
|
|
# print "paths: @paths\nPATH: $ENV{'PATH'}\n";
|
|
# Create a difference of $PATH and $extra_paths and add that to $PATH:
|
|
foreach my $id (@path) {
|
|
if ( !(grep { /^$id$/ } @paths) && $id !~ /(game)/ ){
|
|
push @paths, $id;
|
|
}
|
|
}
|
|
# print "paths: @paths\n";
|
|
}
|
|
|
|
sub set_sep {
|
|
if ( $b_irc ){
|
|
# too hard to read if no colors, so force that for users on irc
|
|
if ($colors{'scheme'} == 0 ){
|
|
$sep{'s1'} = $sep{'s1-console'};
|
|
$sep{'s2'} = $sep{'s2-console'};
|
|
}
|
|
else {
|
|
$sep{'s1'} = $sep{'s1-irc'};
|
|
$sep{'s2'} = $sep{'s2-irc'};
|
|
}
|
|
}
|
|
else {
|
|
$sep{'s1'} = $sep{'s1-console'};
|
|
$sep{'s2'} = $sep{'s2-console'};
|
|
}
|
|
}
|
|
|
|
sub set_user_paths {
|
|
my ( $b_conf, $b_data );
|
|
# this needs to be set here because various options call the parent
|
|
# initialize function directly.
|
|
$self_path = $0;
|
|
$self_path =~ s/[^\/]+$//;
|
|
|
|
if ( defined $ENV{'XDG_CONFIG_HOME'} && $ENV{'XDG_CONFIG_HOME'} ){
|
|
$user_config_dir=$ENV{'XDG_CONFIG_HOME'};
|
|
$b_conf=1;
|
|
}
|
|
elsif ( -d "$ENV{'HOME'}/.config" ){
|
|
$user_config_dir="$ENV{'HOME'}/.config";
|
|
$b_conf=1;
|
|
}
|
|
else {
|
|
$user_config_dir="$ENV{'HOME'}/.$self_name";
|
|
}
|
|
if ( defined $ENV{'XDG_DATA_HOME'} && $ENV{'XDG_DATA_HOME'} ){
|
|
$user_data_dir="$ENV{'XDG_DATA_HOME'}/$self_name";
|
|
$b_data=1;
|
|
}
|
|
elsif ( -d "$ENV{'HOME'}/.local/share" ){
|
|
$user_data_dir="$ENV{'HOME'}/.local/share/$self_name";
|
|
$b_data=1;
|
|
}
|
|
else {
|
|
$user_data_dir="$ENV{'HOME'}/.$self_name";
|
|
}
|
|
# note, this used to be created/checked in specific instance, but we'll just do it
|
|
# universally so it's done at script start.
|
|
if ( ! -d $user_data_dir ){
|
|
mkdir $user_data_dir;
|
|
# system "echo", "Made: $user_data_dir";
|
|
}
|
|
if ( $b_conf && -f "$ENV{'HOME'}/.$self_name/$self_name.conf" ){
|
|
#system 'mv', "-f $ENV{'HOME'}/.$self_name/$self_name.conf", $user_config_dir;
|
|
# print "WOULD: Moved $self_name.conf from $ENV{'HOME'}/.$self_name to $user_config_dir\n";
|
|
}
|
|
if ( $b_data && -d "$ENV{'HOME'}/.$self_name" ){
|
|
#system 'mv', '-f', "$ENV{'HOME'}/.$self_name/*", $user_data_dir;
|
|
#system 'rm', '-Rf', "$ENV{'HOME'}/.$self_name";
|
|
# print "WOULD: Moved data dir $ENV{'HOME'}/.$self_name to $user_data_dir\n";
|
|
}
|
|
$log_file="$user_data_dir/$self_name.log";
|
|
#system 'echo', "$ENV{'HOME'}/.$self_name/* $user_data_dir";
|
|
# print "scd: $user_config_dir sdd: $user_data_dir \n";
|
|
}
|
|
|
|
# args: 1: set|hash key to return either null or path
|
|
sub system_files {
|
|
my ($file) = @_;
|
|
if ( $file eq 'set'){
|
|
%files = (
|
|
'asound-cards' => '/proc/asound/cards',
|
|
'asound-modules' => '/proc/asound/modules',
|
|
'asound-version' => '/proc/asound/version',
|
|
'cpuinfo' => '/proc/cpuinfo',
|
|
'dmesg-boot' => '/var/run/dmesg.boot',
|
|
'lsb-release' => '/etc/lsb-release',
|
|
'mdstat' => '/proc/mdstat',
|
|
'meminfo' => '/proc/meminfo',
|
|
'modules' => '/proc/modules',
|
|
'mounts' => '/proc/mounts',
|
|
'os-release' => '/etc/os-release',
|
|
'partitions' => '/proc/partitions',
|
|
'scsi' => '/proc/scsi/scsi',
|
|
'version' => '/proc/version',
|
|
'xorg-log' => '/var/log/Xorg.0.log'
|
|
);
|
|
foreach ( keys %files ){
|
|
$system_files{$_} = ( -e $files{$_} ) ? $files{$_} : '';
|
|
}
|
|
if ( ! $system_files{'xorg-log'} && check_program('xset') ){
|
|
my $data = qx(xset q 2>/dev/null);
|
|
foreach ( split /\n/, $data){
|
|
if ($_ =~ /Log file/i){
|
|
$system_files{'xorg-log'} = get_piece($_,3);
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
return $system_files{$file};
|
|
}
|
|
}
|
|
|
|
########################################################################
|
|
#### UTILITIES
|
|
########################################################################
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### COLORS
|
|
#### -------------------------------------------------------------------
|
|
|
|
## arg: 1 - the type of action, either integer, count, or full
|
|
sub get_color_scheme {
|
|
my ($type) = @_;
|
|
eval $start if $b_log;
|
|
my @color_schemes = (
|
|
[qw(EMPTY EMPTY EMPTY )],
|
|
[qw(NORMAL NORMAL NORMAL )],
|
|
# for dark OR light backgrounds
|
|
[qw(BLUE NORMAL NORMAL)],
|
|
[qw(BLUE RED NORMAL )],
|
|
[qw(CYAN BLUE NORMAL )],
|
|
[qw(DCYAN NORMAL NORMAL)],
|
|
[qw(DCYAN BLUE NORMAL )],
|
|
[qw(DGREEN NORMAL NORMAL )],
|
|
[qw(DYELLOW NORMAL NORMAL )],
|
|
[qw(GREEN DGREEN NORMAL )],
|
|
[qw(GREEN NORMAL NORMAL )],
|
|
[qw(MAGENTA NORMAL NORMAL)],
|
|
[qw(RED NORMAL NORMAL)],
|
|
# for light backgrounds
|
|
[qw(BLACK DGREY NORMAL)],
|
|
[qw(DBLUE DGREY NORMAL )],
|
|
[qw(DBLUE DMAGENTA NORMAL)],
|
|
[qw(DBLUE DRED NORMAL )],
|
|
[qw(DBLUE BLACK NORMAL)],
|
|
[qw(DGREEN DYELLOW NORMAL )],
|
|
[qw(DYELLOW BLACK NORMAL)],
|
|
[qw(DMAGENTA BLACK NORMAL)],
|
|
[qw(DCYAN DBLUE NORMAL)],
|
|
# for dark backgrounds
|
|
[qw(WHITE GREY NORMAL)],
|
|
[qw(GREY WHITE NORMAL)],
|
|
[qw(CYAN GREY NORMAL )],
|
|
[qw(GREEN WHITE NORMAL )],
|
|
[qw(GREEN YELLOW NORMAL )],
|
|
[qw(YELLOW WHITE NORMAL )],
|
|
[qw(MAGENTA CYAN NORMAL )],
|
|
[qw(MAGENTA YELLOW NORMAL)],
|
|
[qw(RED CYAN NORMAL)],
|
|
[qw(RED WHITE NORMAL )],
|
|
[qw(BLUE WHITE NORMAL)],
|
|
# miscellaneous
|
|
[qw(RED BLUE NORMAL )],
|
|
[qw(RED DBLUE NORMAL)],
|
|
[qw(BLACK BLUE NORMAL)],
|
|
[qw(BLACK DBLUE NORMAL)],
|
|
[qw(NORMAL BLUE NORMAL)],
|
|
[qw(BLUE MAGENTA NORMAL)],
|
|
[qw(DBLUE MAGENTA NORMAL)],
|
|
[qw(BLACK MAGENTA NORMAL)],
|
|
[qw(MAGENTA BLUE NORMAL)],
|
|
[qw(MAGENTA DBLUE NORMAL)],
|
|
);
|
|
if ($type eq 'count' ){
|
|
return scalar @color_schemes;
|
|
}
|
|
if ($type eq 'full' ){
|
|
return @color_schemes;
|
|
}
|
|
else {
|
|
return @{$color_schemes[$type]};
|
|
# print Dumper $color_schemes[$scheme_nu];
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_color_scheme {
|
|
eval $start if $b_log;
|
|
my ($scheme) = @_;
|
|
$colors{'scheme'} = $scheme;
|
|
my $index = ( $b_irc ) ? 1 : 0; # defaults to non irc
|
|
|
|
# NOTE: qw(...) kills the escape, it is NOT the same as using
|
|
# Literal "..", ".." despite docs saying it is.
|
|
my %color_palette = (
|
|
'EMPTY' => [ '', '' ],
|
|
'DGREY' => [ "\e[1;30m", "\x0314" ],
|
|
'BLACK' => [ "\e[0;30m", "\x0301" ],
|
|
'RED' => [ "\e[1;31m", "\x0304" ],
|
|
'DRED' => [ "\e[0;31m", "\x0305" ],
|
|
'GREEN' => [ "\e[1;32m", "\x0309" ],
|
|
'DGREEN' => [ "\e[0;32m", "\x0303" ],
|
|
'YELLOW' => [ "\e[1;33m", "\x0308" ],
|
|
'DYELLOW' => [ "\e[0;33m", "\x0307" ],
|
|
'BLUE' => [ "\e[1;34m", "\x0312" ],
|
|
'DBLUE' => [ "\e[0;34m", "\x0302" ],
|
|
'MAGENTA' => [ "\e[1;35m", "\x0313" ],
|
|
'DMAGENTA' => [ "\e[0;35m", "\x0306" ],
|
|
'CYAN' => [ "\e[1;36m", "\x0311" ],
|
|
'DCYAN' => [ "\e[0;36m", "\x0310" ],
|
|
'WHITE' => [ "\e[1;37m", "\x0300" ],
|
|
'GREY' => [ "\e[0;37m", "\x0315" ],
|
|
'NORMAL' => [ "\e[0m", "\x03" ],
|
|
);
|
|
my @scheme = get_color_scheme($colors{'scheme'});
|
|
$colors{'c1'} = $color_palette{$scheme[0]}[$index];
|
|
$colors{'c2'} = $color_palette{$scheme[1]}[$index];
|
|
$colors{'cn'} = $color_palette{$scheme[2]}[$index];
|
|
# print Dumper \@scheme;
|
|
# print "$colors{'c1'}here$colors{'c2'} we are!$colors{'cn'}\n";
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_colors {
|
|
eval $start if $b_log;
|
|
# it's already been set with -c 0-43
|
|
if ( exists $colors{'c1'} ){
|
|
return 1;
|
|
}
|
|
# This let's user pick their color scheme. For IRC, only shows the color schemes,
|
|
# no interactive. The override value only will be placed in user config files.
|
|
# /etc/inxi.conf can also override
|
|
if (exists $colors{'selector'}){
|
|
my $ob_selector = SelectColors->new($colors{'selector'});
|
|
$ob_selector->select_schema();
|
|
return 1;
|
|
}
|
|
# set the default, then override as required
|
|
my $color_scheme = $colors{'default'};
|
|
# these are set in user configs
|
|
if (defined $colors{'global'}){
|
|
$color_scheme = $colors{'global'};
|
|
}
|
|
else {
|
|
if ( $b_irc ){
|
|
if (defined $colors{'irc-virt-term'} && $b_display && $client{'console-irc'}){
|
|
$color_scheme = $colors{'irc-virt-term'};
|
|
}
|
|
elsif (defined $colors{'irc-console'} && !$b_display){
|
|
$color_scheme = $colors{'irc-console'};
|
|
}
|
|
elsif ( defined $colors{'irc-gui'}) {
|
|
$color_scheme = $colors{'irc-gui'};
|
|
}
|
|
}
|
|
else {
|
|
if (defined $colors{'console'} && !$b_display){
|
|
$color_scheme = $colors{'console'};
|
|
}
|
|
elsif (defined $colors{'virt-term'}){
|
|
$color_scheme = $colors{'virt-term'};
|
|
}
|
|
}
|
|
}
|
|
# force 0 for | or > output, all others prints to irc or screen
|
|
if (!$b_irc && ! -t STDOUT ){
|
|
$color_scheme = 0;
|
|
}
|
|
set_color_scheme($color_scheme);
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
## SelectColors
|
|
{
|
|
package SelectColors;
|
|
|
|
# use warnings;
|
|
# use strict;
|
|
# use diagnostics;
|
|
# use 5.008;
|
|
|
|
my (@data,@rows,%configs,%status);
|
|
my ($type,$w_fh);
|
|
my $safe_color_count = 12; # null/normal + default color group
|
|
my $count = 0;
|
|
|
|
# args: 1 - type
|
|
sub new {
|
|
my $class = shift;
|
|
($type) = @_;
|
|
my $self = {};
|
|
return bless $self, $class;
|
|
}
|
|
sub select_schema {
|
|
eval $start if $b_log;
|
|
assign_selectors();
|
|
main::set_color_scheme(0);
|
|
set_status();
|
|
start_selector();
|
|
create_color_selections();
|
|
if (! $b_irc ){
|
|
main::check_config_file();
|
|
get_selection();
|
|
}
|
|
else {
|
|
print_irc_message();
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_status {
|
|
$status{'console'} = (defined $colors{'console'}) ? "Set: $colors{'console'}" : 'Not Set';
|
|
$status{'virt-term'} = (defined $colors{'virt-term'}) ? "Set: $colors{'virt-term'}" : 'Not Set';
|
|
$status{'irc-console'} = (defined $colors{'irc-console'}) ? "Set: $colors{'irc-console'}" : 'Not Set';
|
|
$status{'irc-gui'} = (defined $colors{'irc-gui'}) ? "Set: $colors{'irc-gui'}" : 'Not Set';
|
|
$status{'irc-virt-term'} = (defined $colors{'irc-virt-term'}) ? "Set: $colors{'irc-virt-term'}" : 'Not Set';
|
|
$status{'global'} = (defined $colors{'global'}) ? "Set: $colors{'global'}" : 'Not Set';
|
|
}
|
|
|
|
sub assign_selectors {
|
|
if ($type == 94){
|
|
$configs{'variable'} = 'CONSOLE_COLOR_SCHEME';
|
|
$configs{'selection'} = 'console';
|
|
}
|
|
elsif ($type == 95){
|
|
$configs{'variable'} = 'VIRT_TERM_COLOR_SCHEME';
|
|
$configs{'selection'} = 'virt-term';
|
|
}
|
|
elsif ($type == 96){
|
|
$configs{'variable'} = 'IRC_COLOR_SCHEME';
|
|
$configs{'selection'} = 'irc-gui';
|
|
}
|
|
elsif ($type == 97){
|
|
$configs{'variable'} = 'IRC_X_TERM_COLOR_SCHEME';
|
|
$configs{'selection'} = 'irc-virt-term';
|
|
}
|
|
elsif ($type == 98){
|
|
$configs{'variable'} = 'IRC_CONS_COLOR_SCHEME';
|
|
$configs{'selection'} = 'irc-console';
|
|
}
|
|
elsif ($type == 99){
|
|
$configs{'variable'} = 'GLOBAL_COLOR_SCHEME';
|
|
$configs{'selection'} = 'global';
|
|
}
|
|
}
|
|
sub start_selector {
|
|
my $whoami = getpwuid($<) || "unknown???";
|
|
if ( ! $b_irc ){
|
|
@data = (
|
|
[ 0, '', '', "Welcome to $self_name! Please select the default
|
|
$configs{'selection'} color scheme."],
|
|
);
|
|
}
|
|
@rows = (
|
|
[ 0, '', '', "Because there is no way to know your $configs{'selection'}
|
|
foreground/background colors, you can set your color preferences from
|
|
color scheme option list below:"],
|
|
[ 0, '', '', "0 is no colors; 1 is neutral."],
|
|
[ 0, '', '', "After these, there are 4 sets:"],
|
|
[ 0, '', '', "1-dark^or^light^backgrounds; 2-light^backgrounds;
|
|
3-dark^backgrounds; 4-miscellaneous"],
|
|
[ 0, '', '', ""],
|
|
);
|
|
push @data, @rows;
|
|
if ( ! $b_irc ){
|
|
@rows = (
|
|
[ 0, '', '', "Please note that this will set the $configs{'selection'}
|
|
preferences only for user: $whoami"],
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
[ 0, '', '', "$line1"],
|
|
);
|
|
push @data, @rows;
|
|
main::print_basic(@data);
|
|
@data = ();
|
|
}
|
|
sub create_color_selections {
|
|
my $spacer = '^^'; # printer removes double spaces, but replaces ^ with ' '
|
|
$count = ( main::get_color_scheme('count') - 1 );
|
|
for my $i (0 .. $count){
|
|
if ($i > 9){
|
|
$spacer = '^';
|
|
}
|
|
if ($configs{'selection'} =~ /^global|irc-gui|irc-console|irc-virt-term$/ && $i > $safe_color_count ){
|
|
last;
|
|
}
|
|
main::set_color_scheme($i);
|
|
@rows = (
|
|
[0, '', '', "$i)$spacer$colors{'c1'}Card:$colors{'c2'}^nVidia^GT218
|
|
$colors{'c1'}Display^Server$colors{'c2'}^x11^(X.Org^1.7.7)$colors{'cn'}"],
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
main::print_basic(@data);
|
|
@data = ();
|
|
main::set_color_scheme(0);
|
|
}
|
|
sub get_selection {
|
|
my $number = $count + 1;
|
|
@data = (
|
|
[0, '', '', ($number++) . ")^Remove all color settings. Restore $self_name default."],
|
|
[0, '', '', ($number++) . ")^Continue, no changes or config file setting."],
|
|
[0, '', '', ($number++) . ")^Exit, use another terminal, or set manually."],
|
|
[0, '', '', "$line1"],
|
|
[0, '', '', "Simply type the number for the color scheme that looks best to your
|
|
eyes for your $configs{'selection'} settings and hit <ENTER>. NOTE: You can bring this
|
|
option list up by starting $self_name with option: -c plus one of these numbers:"],
|
|
[0, '', '', "94^-^console,^not^in^desktop^-^$status{'console'}"],
|
|
[0, '', '', "95^-^terminal,^desktop^-^$status{'virt-term'}"],
|
|
[0, '', '', "96^-^irc,^gui,^desktop^-^$status{'irc-gui'}"],
|
|
[0, '', '', "97^-^irc,^desktop,^in^terminal^-^$status{'irc-virt-term'}"],
|
|
[0, '', '', "98^-^irc,^not^in^desktop^-^$status{'irc-console'}"],
|
|
[0, '', '', "99^-^global^-^$status{'global'}"],
|
|
[0, '', '', ""],
|
|
[0, '', '', "Your selection(s) will be stored here: $user_config_file"],
|
|
[0, '', '', "Global overrides all individual color schemes. Individual
|
|
schemes remove the global setting."],
|
|
[0, '', '', "$line1"],
|
|
);
|
|
main::print_basic(@data);
|
|
@data = ();
|
|
my $response = <STDIN>;
|
|
chomp $response;
|
|
if ($response =~ /[^0-9]/ || $response > ($count + 3)){
|
|
@data = (
|
|
[0, '', '', "Error - Invalid Selection. You entered this: $response. Hit <ENTER> to continue."],
|
|
[0, '', '', "$line1"],
|
|
);
|
|
main::print_basic(@data);
|
|
my $response = <STDIN>;
|
|
start_selector();
|
|
create_color_selections();
|
|
get_selection();
|
|
}
|
|
else {
|
|
process_selection($response);
|
|
}
|
|
}
|
|
sub process_selection {
|
|
my $response = shift;
|
|
if ($response == ($count + 3) ){
|
|
@data = ([0, '', '', "Ok, exiting $self_name now. You can set the colors later."],);
|
|
main::print_basic(@data);
|
|
exit 1;
|
|
}
|
|
elsif ($response == ($count + 2)){
|
|
@data = (
|
|
[0, '', '', "Ok, continuing $self_name unchanged."],
|
|
[0, '', '', "$line1"],
|
|
);
|
|
main::print_basic(@data);
|
|
if ( defined $colors{'console'} && !$b_display ){
|
|
main::set_color_scheme($colors{'console'});
|
|
}
|
|
if ( defined $colors{'virt-term'} ){
|
|
main::set_color_scheme($colors{'virt-term'});
|
|
}
|
|
else {
|
|
main::set_color_scheme($colors{'default'});
|
|
}
|
|
}
|
|
elsif ($response == ($count + 1)){
|
|
@data = (
|
|
[0, '', '', "Removing all color settings from config file now..."],
|
|
[0, '', '', "$line1"],
|
|
);
|
|
main::print_basic(@data);
|
|
delete_all_config_colors();
|
|
main::set_color_scheme($colors{'default'});
|
|
}
|
|
else {
|
|
main::set_color_scheme($response);
|
|
@data = (
|
|
[0, '', '', "Updating config file for $configs{'selection'} color scheme now..."],
|
|
[0, '', '', "$line1"],
|
|
);
|
|
main::print_basic(@data);
|
|
if ($configs{'selection'} eq 'global'){
|
|
delete_all_config_colors();
|
|
}
|
|
set_config_color_scheme($response);
|
|
}
|
|
}
|
|
sub delete_all_config_colors {
|
|
my @file_lines = main::reader( $user_config_file );
|
|
open( $w_fh, '>', $user_config_file ) or error_handler('open', $user_config_file, $!);
|
|
foreach ( @file_lines ) {
|
|
if ( $_ !~ /^(CONSOLE_COLOR_SCHEME|GLOBAL_COLOR_SCHEME|IRC_COLOR_SCHEME|IRC_CONS_COLOR_SCHEME|IRC_X_TERM_COLOR_SCHEME|VIRT_TERM_COLOR_SCHEME)/){
|
|
print {$w_fh} "$_";
|
|
}
|
|
}
|
|
close $w_fh;
|
|
}
|
|
sub set_config_color_scheme {
|
|
my $value = shift;
|
|
my @file_lines = main::reader( $user_config_file );
|
|
my $b_found = 0;
|
|
open( $w_fh, '>', $user_config_file ) or error_handler('open', $user_config_file, $!);
|
|
foreach ( @file_lines ) {
|
|
if ( $_ =~ /^$configs{'variable'}/ ){
|
|
$_ = "$configs{'variable'}=$value";
|
|
$b_found = 1;
|
|
}
|
|
print $w_fh "$_\n";
|
|
}
|
|
if (! $b_found ){
|
|
print $w_fh "$configs{'variable'}=$value\n";
|
|
}
|
|
close $w_fh;
|
|
}
|
|
|
|
sub print_irc_message {
|
|
@data = (
|
|
[ 0, '', '', "$line1"],
|
|
[ 0, '', '', "After finding the scheme number you like, simply run this again
|
|
in a terminal to set the configuration data file for your irc client. You can
|
|
set color schemes for the following: start inxi with -c plus:"],
|
|
[ 0, '', '', "94 (console,^not^in^desktop^-^$status{'console'})"],
|
|
[ 0, '', '', "95 (terminal, desktop^-^$status{'virt-term'})"],
|
|
[ 0, '', '', "96 (irc,^gui,^desktop^-^$status{'irc-gui'})"],
|
|
[ 0, '', '', "97 (irc,^desktop,^in terminal^-^$status{'irc-virt-term'})"],
|
|
[ 0, '', '', "98 (irc,^not^in^desktop^-^$status{'irc-console'})"],
|
|
[ 0, '', '', "99 (global^-^$status{'global'})"]
|
|
);
|
|
main::print_basic(@data);
|
|
exit 1;
|
|
}
|
|
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### CONFIGS
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub check_config_file {
|
|
$user_config_file = "$user_config_dir/$self_name.conf";
|
|
if ( ! -f $user_config_file ){
|
|
open( my $fh, '>', $user_config_file ) or error_handler('create', $user_config_file, $!);
|
|
}
|
|
}
|
|
|
|
sub get_configs {
|
|
my (@configs) = @_;
|
|
my ($key, $val,@config_files);
|
|
if (!@configs){
|
|
@config_files = (
|
|
qq(/etc/$self_name.conf),
|
|
qq($user_config_dir/$self_name.conf)
|
|
);
|
|
}
|
|
else {
|
|
@config_files = (@configs);
|
|
}
|
|
# Config files should be passed in an array as a param to this function.
|
|
# Default intended use: global @CONFIGS;
|
|
foreach (@config_files) {
|
|
next unless open (my $fh, '<', "$_");
|
|
while (<$fh>) {
|
|
chomp;
|
|
s/#.*//;
|
|
s/^\s+//;
|
|
s/\s+$//;
|
|
s/'|"//g;
|
|
s/true/1/; # switch to 1/0 perl boolean
|
|
s/false/0/; # switch to 1/0 perl boolean
|
|
next unless length;
|
|
($key, $val) = split(/\s*=\s*/, $_, 2);
|
|
get_config_item($key,$val);
|
|
# print "f: $file key: $key val: $val\n";
|
|
}
|
|
close $fh;
|
|
}
|
|
}
|
|
|
|
# args: 0: key; 1: value
|
|
sub get_config_item {
|
|
my ($key,$val) = @_;
|
|
if ($key eq 'ALLOW_UPDATE' || $key eq 'B_ALLOW_UPDATE') {$b_update = int($val)}
|
|
elsif ($key eq 'ALLOW_WEATHER' || $key eq 'B_ALLOW_WEATHER') {$b_weather = int($val)}
|
|
elsif ($key eq 'CPU_SLEEP') {$cpu_sleep = $val if $val =~ /^[0-9\.]$/}
|
|
elsif ($key eq 'DL_TIMEOUT') {$dl_timeout = int($val)}
|
|
elsif ($key eq 'DOWNLOADER') {
|
|
if ($val =~ /^(curl|fetch|ftp|perl|wget)$/){
|
|
# this dumps all the other data and resets %dl for only the
|
|
# desired downloader.
|
|
$val = set_perl_downloader($val);
|
|
%dl = ('dl' => $val, $val => 1);
|
|
}}
|
|
elsif ($key eq 'FILTER_STRING') {$filter_string = $val}
|
|
elsif ($key eq 'LANGUAGE') {$language = $val if $val =~ /^(en)$/}
|
|
elsif ($key eq 'LIMIT') {$limit = int($val)}
|
|
elsif ($key eq 'OUTPUT_TYPE') {$output_type = $val if $val =~ /^json|screen|xml/}
|
|
elsif ($key eq 'PS_COUNT') {$ps_count = int($val) }
|
|
elsif ($key eq 'SENSORS_CPU_NO') {$sensors_cpu_nu = int($val)}
|
|
elsif ($key eq 'SHOW_HOST' || $key eq 'B_SHOW_HOST') { $show{'host'} = int($val)}
|
|
elsif ($key eq 'WEATHER_UNIT') {
|
|
$val = lc($val) if $val;
|
|
if ($val && $val =~ /^(c|f|cf|fc|i|m|im|mi)$/){
|
|
my %units = ('c'=>'m','f'=>'i','cf'=>'mi','fc'=>'im');
|
|
$val = $units{$val} if defined $units{$val};
|
|
$weather_unit = $val;
|
|
}
|
|
}
|
|
# layout
|
|
elsif ($key eq 'CONSOLE_COLOR_SCHEME') {$colors{'console'} = int($val)}
|
|
elsif ($key eq 'GLOBAL_COLOR_SCHEME') {$colors{'global'} = int($val)}
|
|
elsif ($key eq 'IRC_COLOR_SCHEME') {$colors{'irc-gui'} = int($val)}
|
|
elsif ($key eq 'IRC_CONS_COLOR_SCHEME') {$colors{'irc-console'} = int($val)}
|
|
elsif ($key eq 'IRC_X_TERM_COLOR_SCHEME') {$colors{'irc-virt-term'} = int($val)}
|
|
elsif ($key eq 'VIRT_TERM_COLOR_SCHEME') {$colors{'virt-term'} = int($val)}
|
|
# note: not using the old short SEP1/SEP2
|
|
elsif ($key eq 'SEP1_IRC') {$sep{'s1-irc'} = $val}
|
|
elsif ($key eq 'SEP1_CONSOLE') {$sep{'s1-console'} = $val}
|
|
elsif ($key eq 'SEP[23]_IRC') {$sep{'s2-irc'} = $val}
|
|
elsif ($key eq 'SEP[23]_CONSOLE') {$sep{'s2-console'} = $val}
|
|
# size
|
|
elsif ($key eq 'COLS_MAX_CONSOLE') {$size{'console'} = int($val)}
|
|
elsif ($key eq 'COLS_MAX_IRC') {$size{'irc'} = int($val)}
|
|
elsif ($key eq 'COLS_MAX_NO_DISPLAY') {$size{'no-display'} = int($val)}
|
|
elsif ($key eq 'INDENT') {$size{'indent'} = int($val)}
|
|
elsif ($key eq 'INDENT_MIN') {$size{'indent-min'} = int($val)}
|
|
# print "mc: key: $key val: $val\n";
|
|
# print Dumper (keys %size) . "\n";
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### DEBUGGERS
|
|
#### -------------------------------------------------------------------
|
|
|
|
# called in the initial -@ 10 program args setting so we can get logging
|
|
# as soon as possible # will have max 3 files, inxi.log, inxi.1.log,
|
|
# inxi.2.log
|
|
sub begin_logging {
|
|
return 1 if $fh_l; # if we want to start logging for testing before options
|
|
my $log_file_2="$user_data_dir/$self_name.1.log";
|
|
my $log_file_3="$user_data_dir/$self_name.2.log";
|
|
my $data = '';
|
|
$end='main::log_data("fe", (caller(1))[3], "");';
|
|
$start='main::log_data("fs", (caller(1))[3], \@_);';
|
|
#$t3 = tv_interval ($t0, [gettimeofday]);
|
|
$t3 = eval 'Time::HiRes::tv_interval (\@t0, [Time::HiRes::gettimeofday()]);' if $b_hires;
|
|
#print Dumper $@;
|
|
my $now = strftime "%Y-%m-%d %H:%M:%S", localtime;
|
|
# do the rotation if logfile exists
|
|
if ( -f $log_file ){
|
|
# copy if present second to third
|
|
if ( -f $log_file_2 ){
|
|
rename $log_file_2, $log_file_3 or error_handler('rename', "$log_file_2 -> $log_file_3", "$!");
|
|
}
|
|
# then copy initial to second
|
|
rename $log_file, $log_file_2 or error_handler('rename', "$log_file -> $log_file_2", "$!");
|
|
}
|
|
# now create the logfile
|
|
# print "Opening log file for reading: $log_file\n";
|
|
open $fh_l, '>', $log_file or error_handler(4, $log_file, "$!");
|
|
# and echo the start data
|
|
$data = $line2;
|
|
$data .= "START $self_name LOGGING:\n";
|
|
$data .= "NOTE: HiRes timer not available.\n" if !$b_hires;
|
|
$data .= "$now\n";
|
|
$data .= "Elapsed since start: $t3\n";
|
|
$data .= "n: $self_name v: $self_version p: $self_patch d: $self_date\n";
|
|
$data .= '@paths:' . joiner(\@paths, '::', 'unset') . "\n";
|
|
$data .= $line2;
|
|
|
|
print $fh_l $data;
|
|
}
|
|
|
|
# NOTE: no logging available until get_parameters is run, since that's what
|
|
# sets logging # in order to trigger earlier logging manually set $b_log
|
|
# to true in top variables.
|
|
# args: $1 - type [fs|fe|cat|dump|raw] OR data to log
|
|
# arg: $2 -
|
|
# arg: $one type (fs/fe/cat/dump/raw) or logged data;
|
|
# [$two is function name; [$three - function args]]
|
|
sub log_data {
|
|
return if ! $b_log;
|
|
my ($one, $two, $three) = @_;
|
|
my $args = '';
|
|
my $data = '';
|
|
my $spacer = ' ';
|
|
# print "1: $one 2: $two 3: $three\n";
|
|
if ($one eq 'fs') {
|
|
if (ref $three eq 'ARRAY'){
|
|
my @temp = @$three;
|
|
# print Data::Dumper::Dumper \@$three;
|
|
$args = "\n${spacer}Args: " . joiner($three, '; ', 'unset');
|
|
}
|
|
else {
|
|
$args = "\n${spacer}Args: None";
|
|
}
|
|
# $t1 = [gettimeofday];
|
|
#$t3 = tv_interval ($t0, [gettimeofday]);
|
|
$t3 = eval 'Time::HiRes::tv_interval(\@t0, [Time::HiRes::gettimeofday()])' if $b_hires;
|
|
#print Dumper $@;
|
|
$data = "Start: Function: $two$args\n${spacer}Elapsed: $t3\n";
|
|
$spacer='';
|
|
}
|
|
elsif ( $one eq 'fe') {
|
|
# print 'timer:', Time::HiRes::tv_interval(\@t0, [Time::HiRes::gettimeofday()]),"\n";
|
|
#$t3 = tv_interval ($t0, [gettimeofday]);
|
|
eval '$t3 = Time::HiRes::tv_interval(\@t0, [Time::HiRes::gettimeofday()])' if $b_hires;
|
|
#print Dumper $t3;
|
|
$data = "${spacer}Elapsed: $t3\nEnd: Function: $two\n";
|
|
$spacer='';
|
|
}
|
|
elsif ( $one eq 'cat') {
|
|
if ( $b_log_full ){
|
|
for my $file ($two){
|
|
my $contents = do { local( @ARGV, $/ ) = $file; <> }; # or: qx(cat $file)
|
|
$data = "$data${line3}Full file data: $file\n\n$contents\n$line3\n";
|
|
}
|
|
$spacer='';
|
|
}
|
|
}
|
|
elsif ($one eq 'cmd'){
|
|
$data = "Command: $two\n";
|
|
$data .= qx($two);
|
|
}
|
|
elsif ($one eq 'data'){
|
|
$data = "$two\n";
|
|
}
|
|
elsif ( $one eq 'dump') {
|
|
$data = "$two:\n";
|
|
if (ref $three eq 'HASH'){
|
|
$data .= Data::Dumper::Dumper \%$three;
|
|
}
|
|
elsif (ref $three eq 'ARRAY'){
|
|
# print Data::Dumper::Dumper \@$three;
|
|
$data .= Data::Dumper::Dumper \@$three;
|
|
}
|
|
else {
|
|
$data .= Data::Dumper::Dumper $three;
|
|
}
|
|
$data .= "\n";
|
|
# print $data;
|
|
}
|
|
elsif ( $one eq 'raw') {
|
|
if ( $b_log_full ){
|
|
$data = "\n${line3}Raw System Data:\n\n$two\n$line3";
|
|
$spacer='';
|
|
}
|
|
}
|
|
else {
|
|
$data = "$two\n";
|
|
}
|
|
# print "d: $data";
|
|
if ($data){
|
|
print $fh_l "$spacer$data";
|
|
}
|
|
}
|
|
|
|
sub set_debugger {
|
|
if ( $debug < 10 || $debug > 12){
|
|
$end = '';
|
|
$start = '';
|
|
if ( $debug >= 20 ){
|
|
error_handler('not-in-irc', 'debug data generator') if $b_irc;
|
|
my $option = ( $debug > 22 ) ? 'main-full' : 'main';
|
|
$b_debug_gz = 1 if ($debug == 22 || $debug == 24);
|
|
my $ob_sys = SystemDebugger->new($option);
|
|
$ob_sys->run_debugger();
|
|
$ob_sys->upload_file($ftp_alt) if $debug > 20;
|
|
exit 0;
|
|
}
|
|
}
|
|
elsif ($debug >= 10 && $debug <= 12){
|
|
$b_log = 1;
|
|
if ($debug == 11){
|
|
$b_log_full = 1;
|
|
}
|
|
elsif ($debug == 12){
|
|
$b_log_colors = 1;
|
|
}
|
|
begin_logging();
|
|
}
|
|
}
|
|
|
|
## SystemDebugger
|
|
{
|
|
package SystemDebugger;
|
|
|
|
# use File::Find q(find);
|
|
#no warnings 'File::Find';
|
|
# use File::Spec::Functions;
|
|
#use File::Copy;
|
|
#use POSIX qw(strftime);
|
|
|
|
my $option = 'main';
|
|
my $upload = '';
|
|
my $data_dir = '';
|
|
my $debug_dir = '';
|
|
my $debug_gz = '';
|
|
my @content = ();
|
|
my $b_debug = 0;
|
|
my $b_delete_dir = 1;
|
|
# args: 1 - type
|
|
# args: 2 - upload
|
|
sub new {
|
|
my $class = shift;
|
|
($option) = @_;
|
|
my $self = {};
|
|
# print "$f\n";
|
|
# print "$option\n";
|
|
return bless $self, $class;
|
|
}
|
|
|
|
sub run_debugger {
|
|
require File::Copy;
|
|
import File::Copy;
|
|
require File::Spec::Functions;
|
|
import File::Spec::Functions;
|
|
|
|
print "Starting $self_name debugging data collector...\n";
|
|
create_debug_directory();
|
|
print "Note: for dmidecode data you must be root.\n" if !$b_root;
|
|
print $line3;
|
|
if (!$b_debug){
|
|
audio_data();
|
|
disk_data();
|
|
display_data();
|
|
network_data();
|
|
perl_modules();
|
|
system_data();
|
|
}
|
|
system_files();
|
|
print $line3;
|
|
if (!$b_debug){
|
|
if ( -d '/sys' && main::count_dir_files('/sys') ){
|
|
sys_tree();
|
|
sys_traverse_data();
|
|
}
|
|
else {
|
|
print "Skipping /sys data collection. /sys not present, or empty.\n";
|
|
}
|
|
print $line3;
|
|
}
|
|
run_self();
|
|
print $line3;
|
|
compress_dir();
|
|
}
|
|
|
|
sub create_debug_directory {
|
|
my $host = main::get_hostname();
|
|
$host =~ s/ /-/g;
|
|
$host = 'no-host' if !$host || $host eq 'N/A';
|
|
my ($arm_string,$bsd_string,$root_string) = ('','','');
|
|
# note: Time::Piece was introduced in perl 5.9.5
|
|
my ($sec,$min,$hour,$mday,$mon,$year) = localtime;
|
|
$year = $year+1900;
|
|
$mon += 1;
|
|
if (length($sec) == 1) {$sec = "0$sec";}
|
|
if (length($min) == 1) {$min = "0$min";}
|
|
if (length($hour) == 1) {$hour = "0$hour";}
|
|
if (length($mon) == 1) {$mon = "0$mon";}
|
|
if (length($mday) == 1) {$mday = "0$mday";}
|
|
|
|
my $today = "$year-$mon-${mday}_$hour$min$sec";
|
|
# my $date = strftime "-%Y-%m-%d_", localtime;
|
|
if ($b_root){
|
|
$root_string = '-root';
|
|
}
|
|
$bsd_string = "-BSD-$bsd_type" if $bsd_type;
|
|
$arm_string = '-ARM' if $b_arm;
|
|
$debug_dir = "$self_name$arm_string$bsd_string-$host-$today$root_string-$self_version";
|
|
$debug_gz = "$debug_dir.tar.gz";
|
|
$data_dir = "$user_data_dir/$debug_dir";
|
|
if ( -d $data_dir ){
|
|
unlink $data_dir or main::error_handler('remove', "$data_dir", "$!");
|
|
}
|
|
mkdir $data_dir or main::error_handler('mkdir', "$data_dir", "$!");
|
|
if ( -e "$user_data_dir/$debug_gz" ){
|
|
#rmdir "$user_data_dir$debug_gz" or main::error_handler('remove', "$user_data_dir/$debug_gz", "$!");
|
|
print "Failed removing leftover directory:\n$user_data_dir$debug_gz error: $?" if system('rm','-rf',"$user_data_dir$debug_gz");
|
|
}
|
|
print "Data going into:\n$data_dir\n";
|
|
}
|
|
sub compress_dir {
|
|
print "Creating tar.gz compressed file of this material...\n";
|
|
print "File: $debug_gz\n";
|
|
system("cd $user_data_dir; tar -czf $debug_gz $debug_dir");
|
|
print "Removing $data_dir...\n";
|
|
#rmdir $data_dir or print "failed removing: $data_dir error: $!\n";
|
|
return 1 if !$b_delete_dir;
|
|
if (system('rm','-rf',$data_dir) ){
|
|
print "Failed removing: $data_dir\nError: $?\n";
|
|
}
|
|
else {
|
|
print "Directory removed.\n";
|
|
}
|
|
}
|
|
# NOTE: incomplete, don't know how to ever find out
|
|
# what sound server is actually running, and is in control
|
|
sub audio_data {
|
|
my (%data,@files,@files2);
|
|
print "Collecting audio data...\n";
|
|
my @cmds = (
|
|
['aplay', '-l'], # alsa
|
|
['pactl', 'list'], # pulseaudio
|
|
);
|
|
run_commands(\@cmds,'audio');
|
|
@files = main::globber('/proc/asound/card*/codec*');
|
|
if (@files){
|
|
my $asound = qx(head -n 1 /proc/asound/card*/codec* 2>&1);
|
|
$data{'proc-asound-codecs'} = $asound;
|
|
}
|
|
else {
|
|
$data{'proc-asound-codecs'} = undef;
|
|
}
|
|
|
|
write_data(\%data,'audio');
|
|
@files = (
|
|
'/proc/asound/cards',
|
|
'/proc/asound/version',
|
|
);
|
|
@files2 = main::globber('/proc/asound/*/usbid');
|
|
@files = (@files,@files2) if @files2;
|
|
copy_files(\@files,'audio');
|
|
}
|
|
## NOTE: >/dev/null 2>&1 is sh, and &>/dev/null is bash, fix this
|
|
# ls -w 1 /sysrs > tester 2>&1
|
|
sub disk_data {
|
|
my (%data,@files,@files2);
|
|
print "Collecting dev, label, disk, uuid data, df...\n";
|
|
@files = (
|
|
'/etc/fstab',
|
|
'/etc/mtab',
|
|
'/proc/mdstat',
|
|
'/proc/mounts',
|
|
'/proc/partitions',
|
|
'/proc/scsi/scsi',
|
|
'/proc/sys/dev/cdrom/info',
|
|
);
|
|
# very old systems
|
|
if (-d '/proc/ide/'){
|
|
my @ides = main::globber('/proc/ide/*/*');
|
|
@files = (@files, @ides) if @ides;
|
|
}
|
|
else {
|
|
push (@files, '/proc-ide-directory');
|
|
}
|
|
copy_files(\@files, 'disk');
|
|
my @cmds = (
|
|
['btrfs', 'filesystem show'],
|
|
['btrfs', 'filesystem show --mounted'],
|
|
# ['btrfs', 'filesystem show --all-devices'],
|
|
['df', '-h -T'],
|
|
['df', '-h'],
|
|
['df', '-k'],
|
|
['df', '-k -T'],
|
|
['df', '-k -T -P'],
|
|
['df', '-P'],
|
|
['lsblk', '-fs'],
|
|
['lsblk', '-fsr'],
|
|
['lsblk', '-fsP'],
|
|
['lsblk', '-a'],
|
|
['lsblk', '-aP'],
|
|
['lsblk', '-ar'],
|
|
['lsblk', '-p'],
|
|
['lsblk', '-pr'],
|
|
['lsblk', '-pP'],
|
|
['lsblk', '-r'],
|
|
['lsblk', '-r --output NAME,PKNAME,TYPE,RM,FSTYPE,SIZE,LABEL,UUID,MOUNTPOINT'],
|
|
['lsblk', '-rb --output NAME,PKNAME,TYPE,RM,FSTYPE,SIZE,LABEL,UUID,MOUNTPOINT'],
|
|
['lsblk', '-Pb --output NAME,PKNAME,TYPE,RM,FSTYPE,SIZE'],
|
|
['lsblk', '-Pb --output NAME,TYPE,RM,FSTYPE,SIZE,LABEL,UUID,SERIAL,MOUNTPOINT'],
|
|
['gpart', 'list'],
|
|
['gpart', 'show'],
|
|
['gpart', 'status'],
|
|
['ls', '-l /dev'],
|
|
['ls', '-l /dev/disk'],
|
|
['ls', '-l /dev/disk/by-id'],
|
|
['ls', '-l /dev/disk/by-label'],
|
|
['ls', '-l /dev/disk/by-uuid'],
|
|
# http://comments.gmane.org/gmane.linux.file-systems.zfs.user/2032
|
|
['ls', '-l /dev/disk/by-wwn'],
|
|
['ls', '-l /dev/disk/by-path'],
|
|
['ls', '-l /dev/mapper'],
|
|
['mount', ''],
|
|
['nvme', 'present'],
|
|
['readlink', '/dev/root'],
|
|
['swapon', '-s'],
|
|
['zfs', 'list'],
|
|
['zpool', 'list'],
|
|
['zpool', 'list -v'],
|
|
);
|
|
run_commands(\@cmds,'disk');
|
|
@cmds = (
|
|
['atacontrol', 'list'],
|
|
['camcontrol', 'devlist'],
|
|
['glabel', 'status'],
|
|
['swapctl', '-l -k'],
|
|
['swapctl', '-l -k'],
|
|
['vmstat', '-H'],
|
|
);
|
|
run_commands(\@cmds,'disk-bsd');
|
|
}
|
|
sub display_data {
|
|
my (%data,@files,@files2);
|
|
my $working = '';
|
|
if ( ! $b_display ){
|
|
print "Warning: only some of the data collection can occur if you are not in X\n";
|
|
main::toucher("$data_dir/display-data-warning-user-not-in-x");
|
|
}
|
|
if ( $b_root ){
|
|
print "Warning: only some of the data collection can occur if you are running as Root user\n";
|
|
main::toucher("$data_dir/display-data-warning-root-user");
|
|
}
|
|
print "Collecting Xorg log and xorg.conf files...\n";
|
|
if ( -d "/etc/X11/xorg.conf.d/" ){
|
|
@files = main::globber("/etc/X11/xorg.conf.d/*");
|
|
}
|
|
else {
|
|
@files = ('/xorg-conf-d');
|
|
}
|
|
push (@files, $files{'xorg-log'});
|
|
push (@files, '/etc/X11/xorg.conf');
|
|
copy_files(\@files,'display-xorg');
|
|
print "Collecting X, xprop, glxinfo, xrandr, xdpyinfo data, wayland, weston...\n";
|
|
%data = (
|
|
'desktop-session' => $ENV{'DESKTOP_SESSION'},
|
|
'gdmsession' => $ENV{'GDMSESSION'},
|
|
'gnome-desktop-session-id' => $ENV{'GNOME_DESKTOP_SESSION_ID'},
|
|
'kde3-full-session' => $ENV{'KDE_FULL_SESSION'},
|
|
'xdg-current-desktop' => $ENV{'XDG_CURRENT_DESKTOP'},
|
|
'kde-gte-4-session-version' => $ENV{'KDE_SESSION_VERSION'},
|
|
'xdg-session-desktop' => $ENV{'XDG_SESSION_DESKTOP'},
|
|
# wayland data collectors:
|
|
'xdg-session-type' => $ENV{'XDG_SESSION_TYPE'},
|
|
'wayland-display' => $ENV{'WAYLAND_DISPLAY'},
|
|
'gdk-backend' => $ENV{'GDK_BACKEND'},
|
|
'qt-qpa-platform' => $ENV{'QT_QPA_PLATFORM'},
|
|
'clutter-backend' => $ENV{'CLUTTER_BACKEND'},
|
|
'sdl-videodriver' => $ENV{'SDL_VIDEODRIVER'},
|
|
# program display values
|
|
'size-indent' => $size{'indent'},
|
|
'size-indent-min' => $size{'indent-min'},
|
|
'size-cols-max' => $size{'max'},
|
|
);
|
|
write_data(\%data,'display');
|
|
my @cmds = (
|
|
# kde 5/plasma desktop 5, this is maybe an extra package and won't be used
|
|
['about-distro',''],
|
|
['aticonfig','--adapter=all --od-gettemperature'],
|
|
['glxinfo',''],
|
|
['glxinfo','-B'],
|
|
['kded','--version'],
|
|
['kded1','--version'],
|
|
['kded2','--version'],
|
|
['kded3','--version'],
|
|
['kded4','--version'],
|
|
['kded5','--version'],
|
|
['kded6','--version'],
|
|
['kf4-config','--version'],
|
|
['kf5-config','--version'],
|
|
['kf6-config','--version'],
|
|
['kwin_x11','--version'],
|
|
['loginctl','--no-pager list-sessions'],
|
|
['nvidia-settings','-q screens'],
|
|
['nvidia-settings','-c :0.0 -q all'],
|
|
['nvidia-smi','-q'],
|
|
['nvidia-smi','-q -x'],
|
|
['plasmashell','--version'],
|
|
['weston-info',''],
|
|
['wmctrl','-m'],
|
|
['weston','--version'],
|
|
['xdpyinfo',''],
|
|
['Xorg','-version'],
|
|
['xprop','-root'],
|
|
['xrandr',''],
|
|
);
|
|
run_commands(\@cmds,'display');
|
|
}
|
|
sub network_data {
|
|
print "Collecting networking data...\n";
|
|
# no warnings 'uninitialized';
|
|
my @cmds = (
|
|
['ifconfig',''],
|
|
['ip','addr'],
|
|
['ip','-s link'],
|
|
);
|
|
run_commands(\@cmds,'network');
|
|
}
|
|
sub perl_modules {
|
|
print "Collecting Perl module data (this can take a while)...\n";
|
|
my @modules = ();
|
|
my ($dirname,$holder,$mods,$value) = ('','','','');
|
|
my $filename = 'perl-modules.txt';
|
|
my @inc;
|
|
foreach (sort @INC){
|
|
# some BSD installs have '.' n @INC path
|
|
if (-d $_ && $_ ne '.'){
|
|
$_ =~ s/\/$//; # just in case, trim off trailing slash
|
|
$value .= "EXISTS: $_\n";
|
|
push @inc, $_;
|
|
}
|
|
else {
|
|
$value .= "ABSENT: $_\n";
|
|
}
|
|
}
|
|
main::writer("$data_dir/perl-inc-data.txt",$value);
|
|
File::Find::find { wanted => sub {
|
|
push @modules, File::Spec->canonpath($_) if /\.pm\z/
|
|
}, no_chdir => 1 }, @inc;
|
|
@modules = sort(@modules);
|
|
foreach (@modules){
|
|
my $dir = $_;
|
|
$dir =~ s/[^\/]+$//;
|
|
if (!$holder || $holder ne $dir ){
|
|
$holder = $dir;
|
|
$value = "DIR: $dir\n";
|
|
$_ =~ s/^$dir//;
|
|
$value .= " $_\n";
|
|
}
|
|
else {
|
|
$value = $_;
|
|
$value =~ s/^$dir//;
|
|
$value = " $value\n";
|
|
}
|
|
$mods .= $value;
|
|
}
|
|
open (my $fh, '>', "$data_dir/$filename");
|
|
print $fh $mods;
|
|
close $fh;
|
|
}
|
|
sub system_data {
|
|
print "Collecting system data...\n";
|
|
my %data = (
|
|
'cc' => $ENV{'CC'},
|
|
# @(#)MIRBSD KSH R56 2018/03/09: ksh and mksh
|
|
'ksh-version' => system('echo -n $KSH_VERSION'), # shell, not env, variable
|
|
'manpath' => $ENV{'MANPATH'},
|
|
'path' => $ENV{'PATH'},
|
|
'xdg-config-home' => $ENV{'XDG_CONFIG_HOME'},
|
|
'xdg-config-dirs' => $ENV{'XDG_CONFIG_DIRS'},
|
|
'xdg-data-home' => $ENV{'XDG_DATA_HOME'},
|
|
'xdg-data-dirs' => $ENV{'XDG_DATA_DIRS'},
|
|
);
|
|
my @files = main::globber('/usr/bin/gcc*');
|
|
if (@files){
|
|
$data{'gcc-versions'} = join "\n",@files;
|
|
}
|
|
else {
|
|
$data{'gcc-versions'} = undef;
|
|
}
|
|
@files = main::globber('/sys/*');
|
|
if (@files){
|
|
$data{'sys-tree-ls-1-basic'} = join "\n", @files;
|
|
}
|
|
else {
|
|
$data{'sys-tree-ls-1-basic'} = undef;
|
|
}
|
|
write_data(\%data,'system');
|
|
# bsd tools http://cb.vu/unixtoolbox.xhtml
|
|
my @cmds = (
|
|
# general
|
|
['sysctl', '-b kern.geom.conftxt'],
|
|
['sysctl', '-b kern.geom.confxml'],
|
|
['usbdevs','-v'],
|
|
# freebsd
|
|
['pciconf','-l -cv'],
|
|
['pciconf','-vl'],
|
|
['pciconf','-l'],
|
|
# openbsd
|
|
['pcidump',''],
|
|
['pcidump','-v'],
|
|
# netbsd
|
|
['kldstat',''],
|
|
['pcictl','list'],
|
|
['pcictl','list -ns'],
|
|
);
|
|
run_commands(\@cmds,'system-bsd');
|
|
# diskinfo -v <disk>
|
|
# fdisk <disk>
|
|
@cmds = (
|
|
['clang','--version'],
|
|
['dmidecode',''],
|
|
['dmesg',''],
|
|
['gcc','--version'],
|
|
['hciconfig','-a'],
|
|
['initctl','list'],
|
|
['ipmi-sensors',''],
|
|
['ipmi-sensors','--output-sensor-thresholds'],
|
|
['ipmitool','sensor'],
|
|
['lscpu',''],
|
|
['lspci','-k'],
|
|
['lspci','-knn'],
|
|
['lspci','-knnv'],# returns ports
|
|
['lspci','-n'],
|
|
['lspci','-nn'],
|
|
['lspci','-nnk'],
|
|
['lspci','-mm'],
|
|
['lspci','-mmk'],
|
|
['lspci','-mmkv'],
|
|
['lspci','-mmnn'],
|
|
['lspci','-v'],
|
|
['lspci',''],
|
|
['lsusb',''],
|
|
['lsusb','-v'],
|
|
['ps','aux'],
|
|
['ps','-e'],
|
|
['ps','-p 1'],
|
|
['runlevel',''],
|
|
['rc-status','-a'],
|
|
['rc-status','-l'],
|
|
['rc-status','-r'],
|
|
['sensors',''],
|
|
# leaving this commented out to remind that some systems do not
|
|
# support strings --version, but will just simply hang at that command
|
|
# which you can duplicate by simply typing: strings then hitting enter.
|
|
# ['strings','--version'],
|
|
['strings','present'],
|
|
['sysctl','-a'],
|
|
['systemctl','list-units'],
|
|
['systemctl','list-units --type=target'],
|
|
['systemd-detect-virt',''],
|
|
['uptime',''],
|
|
);
|
|
run_commands(\@cmds,'system');
|
|
@files = main::globber('/dev/bus/usb/*/*');
|
|
copy_files(\@files, 'system');
|
|
}
|
|
sub system_files {
|
|
print "Collecting system files data...\n";
|
|
my (%data,@files,@files2);
|
|
@files = RepoData::get($data_dir);
|
|
copy_files(\@files, 'repo');
|
|
# chdir "/etc";
|
|
@files = main::globber("/etc/*[-_]{[rR]elease,[vV]ersion}");
|
|
push (@files, '/etc/issue');
|
|
push (@files, '/etc/lsb-release');
|
|
push (@files, '/etc/os-release');
|
|
copy_files(\@files,'system-distro');
|
|
@files = (
|
|
'/proc/1/comm',
|
|
'/proc/cpuinfo',
|
|
'/proc/meminfo',
|
|
'/proc/modules',
|
|
'/proc/net/arp',
|
|
'/proc/version',
|
|
);
|
|
@files2=main::globber('/sys/class/power_supply/*/uevent');
|
|
if (@files2){
|
|
@files = (@files,@files2);
|
|
}
|
|
else {
|
|
push (@files, '/sys-class-power-supply-empty');
|
|
}
|
|
copy_files(\@files, 'system');
|
|
@files = (
|
|
'/etc/make.conf',
|
|
'/etc/src.conf',
|
|
'/var/run/dmesg.boot',
|
|
);
|
|
copy_files(\@files,'system-bsd');
|
|
}
|
|
|
|
sub copy_files {
|
|
my ($files_ref, $type) = @_;
|
|
my ($absent,$error,$good,$name,$unreadable);
|
|
foreach (@$files_ref) {
|
|
$name = $_;
|
|
$name =~ s/^\///;
|
|
$name =~ s/\//-/g;
|
|
$name = "$data_dir/$type-file-$name";
|
|
$good = $name . '.txt';
|
|
$absent = $name . '-absent';
|
|
$error = $name . '-error';
|
|
$unreadable = $name . '-unreadable';
|
|
if (-e $_ ) {
|
|
if (-r $_){
|
|
copy($_,"$good") or main::toucher($error);
|
|
}
|
|
else {
|
|
main::toucher($unreadable);
|
|
}
|
|
}
|
|
else {
|
|
main::toucher($absent);
|
|
}
|
|
}
|
|
}
|
|
|
|
sub run_commands {
|
|
my ($cmds,$type) = @_;
|
|
my $holder = '';
|
|
my ($name,$cmd,$args);
|
|
foreach (@$cmds){
|
|
my @rows = @$_;
|
|
if (my $program = main::check_program($rows[0])){
|
|
if ($rows[1] eq 'present'){
|
|
$name = "$data_dir/$type-cmd-$rows[0]-present";
|
|
main::toucher($name);
|
|
}
|
|
else {
|
|
$args = $rows[1];
|
|
$args =~ s/\s|--|\/|=/-/g; # for:
|
|
$args =~ s/--/-/g;# strip out -- that result from the above
|
|
$args =~ s/^-//g;
|
|
$args = "-$args" if $args;
|
|
$name = "$data_dir/$type-cmd-$rows[0]$args.txt";
|
|
$cmd = "$program $rows[1] >$name 2>&1";
|
|
system($cmd);
|
|
}
|
|
}
|
|
else {
|
|
if ($holder ne $rows[0]){
|
|
$name = "$data_dir/$type-cmd-$rows[0]-absent";
|
|
main::toucher($name);
|
|
$holder = $rows[0];
|
|
}
|
|
}
|
|
}
|
|
}
|
|
sub write_data {
|
|
my ($data_ref, $type) = @_;
|
|
my ($empty,$error,$fh,$good,$name,$undefined,$value);
|
|
foreach (keys %$data_ref) {
|
|
$value = $$data_ref{$_};
|
|
$name = "$data_dir/$type-data-$_";
|
|
$good = $name . '.txt';
|
|
$empty = $name . '-empty';
|
|
$error = $name . '-error';
|
|
$undefined = $name . '-undefined';
|
|
if (defined $value) {
|
|
if ($value || $value eq '0'){
|
|
open($fh, '>', $good) or main::toucher($error);
|
|
print $fh "$value";
|
|
}
|
|
else {
|
|
main::toucher($empty);
|
|
}
|
|
}
|
|
else {
|
|
main::toucher($undefined);
|
|
}
|
|
}
|
|
}
|
|
|
|
sub run_self {
|
|
print "Creating $self_name output file now. This can take a few seconds...\n";
|
|
print "Starting $self_name from: $self_path\n";
|
|
my $i = ($option eq 'main-full')? ' -i' : '';
|
|
my $cmd = "$self_path/$self_name -FRfrploudmxxx$i -c 0 --usb --slots --debug 10 -y 120 > $data_dir/$self_name-FRfrploudmxxxyusbslots120.txt 2>&1";
|
|
system($cmd);
|
|
copy($log_file, "$data_dir") or main::error_handler('copy-failed', "$log_file", "$!");
|
|
system("$self_path/$self_name --recommends -y 120 > $data_dir/$self_name-recommends-120.txt 2>&1");
|
|
}
|
|
|
|
sub sys_tree {
|
|
print "Constructing /sys tree data...\n";
|
|
if ( main::check_program('tree') ){
|
|
my $dirname = '/sys';
|
|
my $cmd;
|
|
system("tree -a -L 10 /sys > $data_dir/sys-data-tree-full-10.txt");
|
|
opendir my($dh), $dirname or main::error_handler('open-dir',"$dirname", "$!");
|
|
my @files = readdir $dh;
|
|
closedir $dh;
|
|
foreach (@files){
|
|
next if /^\./;
|
|
$cmd = "tree -a -L 10 $dirname/$_ > $data_dir/sys-data-tree-$_-10.txt";
|
|
#print "$cmd\n";
|
|
system($cmd);
|
|
}
|
|
}
|
|
# for now, we want all of these as well for better debugging
|
|
#else {
|
|
sys_ls(1);
|
|
sys_ls(2);
|
|
sys_ls(3);
|
|
sys_ls(4);
|
|
#}
|
|
}
|
|
sub sys_ls {
|
|
my ( $depth) = @_;
|
|
my $cmd = do {
|
|
if ( $depth == 1 ){ 'ls -l /sys/ 2>/dev/null' }
|
|
elsif ( $depth == 2 ){ 'ls -l /sys/*/ 2>/dev/null' }
|
|
elsif ( $depth == 3 ){ 'ls -l /sys/*/*/ 2>/dev/null' }
|
|
elsif ( $depth == 4 ){ 'ls -l /sys/*/*/*/ 2>/dev/null' }
|
|
elsif ( $depth == 5 ){ 'ls -l /sys/*/*/*/*/ 2>/dev/null' }
|
|
elsif ( $depth == 5 ){ 'ls -l /sys/*/*/*/*/ 2>/dev/null' }
|
|
};
|
|
my @working = ();
|
|
my $output = '';
|
|
my ($type);
|
|
my $result = qx($cmd);
|
|
open my $ch, '<', \$result or main::error_handler('open-data',"$cmd", "$!");
|
|
while ( my $line = <$ch> ){
|
|
chomp($line);
|
|
$line =~ s/^\s+|\s+$//g;
|
|
@working = split /\s+/, $line;
|
|
$working[0] ||= '';
|
|
if ( scalar @working > 7 ){
|
|
if ($working[0] =~ /^d/ ){
|
|
$type = "d - ";
|
|
}
|
|
elsif ($working[0] =~ /^l/){
|
|
$type = "l - ";
|
|
}
|
|
else {
|
|
$type = "f - ";
|
|
}
|
|
$working[9] ||= '';
|
|
$working[10] ||= '';
|
|
$output = $output . " $type$working[8] $working[9] $working[10]\n";
|
|
}
|
|
elsif ( $working[0] !~ /^total/ ){
|
|
$output = $output . $line . "\n";
|
|
}
|
|
}
|
|
close $ch;
|
|
my $file = "$data_dir/sys-data-ls-$depth.txt";
|
|
open my $fh, '>', $file or main::error_handler('create',"$file", "$!");
|
|
print $fh $output;
|
|
close $fh;
|
|
# print "$output\n";
|
|
}
|
|
|
|
sub sys_traverse_data {
|
|
print "Parsing /sys files...\n";
|
|
# get rid pointless error:Can't cd to (/sys/kernel/) debug: Permission denied
|
|
no warnings 'File::Find';
|
|
File::Find::find( \&wanted, "/sys");
|
|
process_data();
|
|
}
|
|
sub wanted {
|
|
return if -d; # not directory
|
|
return unless -e; # Must exist
|
|
return unless -r; # Must be readable
|
|
return unless -f; # Must be file
|
|
# note: a new file in 4.11 /sys can hang this, it is /parameter/ then
|
|
# a few variables. Since inxi does not need to see that file, we will
|
|
# not use it. Also do not need . files or __ starting files
|
|
# print $File::Find::name . "\n";
|
|
# block maybe: cfgroup\/
|
|
return if $File::Find::name =~ /\/(\.[a-z]|kernel\/|parameters\/|debug\/)/;
|
|
# comment this one out if you experience hangs or if
|
|
# we discover syntax of foreign language characters
|
|
# Must be ascii like. This is questionable and might require further
|
|
# investigation, it is removing some characters that we might want
|
|
return unless -T;
|
|
# print $File::Find::name . "\n";
|
|
push (@content, $File::Find::name);
|
|
return;
|
|
}
|
|
sub process_data {
|
|
my ($data,$fh,$result,$row,$sep);
|
|
my $filename = "sys-data-parse.txt";
|
|
# no sorts, we want the order it comes in
|
|
# @content = sort @content;
|
|
foreach (@content){
|
|
$data='';
|
|
$sep='';
|
|
open($fh, '<', $_);
|
|
while ($row = <$fh>) {
|
|
chomp $row;
|
|
$data .= $sep . '"' . $row . '"';
|
|
$sep=', ';
|
|
}
|
|
$result .= "$_:[$data]\n";
|
|
# print "$_:[$data]\n"
|
|
}
|
|
# print scalar @content . "\n";
|
|
open ($fh, '>', "$data_dir/$filename");
|
|
print $fh $result;
|
|
close $fh;
|
|
# print $fh "$result";
|
|
}
|
|
# args: 1 - path to file to be uploaded
|
|
# args: 2 - optional: alternate ftp upload url
|
|
# NOTE: must be in format: ftp.site.com/incoming
|
|
sub upload_file {
|
|
require Net::FTP;
|
|
import Net::FTP;
|
|
my ($self, $ftp_url) = @_;
|
|
my ($ftp, $domain, $host, $user, $pass, $dir, $error);
|
|
$ftp_url ||= main::get_defaults('ftp-upload');
|
|
$ftp_url =~ s/\/$//g; # trim off trailing slash if present
|
|
my @url = split(/\//, $ftp_url);
|
|
my $file_path = "$user_data_dir/$debug_gz";
|
|
$host = $url[0];
|
|
$dir = $url[1];
|
|
$domain = $host;
|
|
$domain =~ s/^ftp\.//;
|
|
$user = "anonymous";
|
|
$pass = "anonymous\@$domain";
|
|
|
|
print $line3;
|
|
print "Uploading to: $ftp_url\n";
|
|
# print "$host $domain $dir $user $pass\n";
|
|
print "File to be uploaded:\n$file_path\n";
|
|
|
|
if ($host && ( $file_path && -e $file_path ) ){
|
|
# NOTE: important: must explicitly set to passive true/1
|
|
$ftp = Net::FTP->new($host, Debug => 0, Passive => 1);
|
|
$ftp->login($user, $pass) || main::error_handler('ftp-login', $ftp->message);
|
|
$ftp->binary();
|
|
$ftp->cwd($dir);
|
|
print "Connected to FTP server.\n";
|
|
$ftp->put($file_path) || main::error_handler('ftp-upload', $ftp->message);
|
|
$ftp->quit;
|
|
print "Uploaded file successfully!\n";
|
|
print $ftp->message;
|
|
if ($b_debug_gz){
|
|
print "Removing debugger gz file:\n$file_path\n";
|
|
unlink $file_path or main::error_handler('remove',"$file_path", "$!");
|
|
print "File removed.\n";
|
|
}
|
|
print "Debugger data generation and upload completed. Thank you for your help.\n";
|
|
}
|
|
else {
|
|
main::error_handler('ftp-bad-path', "$file_path");
|
|
}
|
|
}
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### DOWNLOADER
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub download_file {
|
|
my ($type, $url, $file) = @_;
|
|
my ($cmd,$args,$timeout) = ('','','');
|
|
my $debug_data = '';
|
|
my $result = 1;
|
|
$dl{'no-ssl-opt'} ||= '';
|
|
$dl{'spider'} ||= '';
|
|
$file ||= 'N/A'; # to avoid debug error
|
|
if ( ! $dl{'dl'} ){
|
|
return 0;
|
|
}
|
|
if ($dl{'timeout'}){
|
|
$timeout = "$dl{'timeout'}$dl_timeout";
|
|
}
|
|
# print "$dl{'no-ssl-opt'}\n";
|
|
# print "$dl{'dl'}\n";
|
|
# tiny supports spider sort of
|
|
## NOTE: 1 is success, 0 false for Perl
|
|
if ($dl{'dl'} eq 'tiny' ){
|
|
$cmd = "Using tiny: type: $type \nurl: $url \nfile: $file";
|
|
$result = get_file($type, $url, $file);
|
|
$debug_data = ($type ne 'stdout') ? $result : 'Success: stdout data not null.';
|
|
}
|
|
# But: 0 is success, and 1 is false for these
|
|
# when strings are returned, they will be taken as true
|
|
else {
|
|
if ($type eq 'stdout'){
|
|
$args = $dl{'stdout'};
|
|
$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $args $url $dl{'null'}";
|
|
$result = qx($cmd);
|
|
$debug_data = ($result) ? 'Success: stdout data not null.' : 'Download resulted in null data!';
|
|
}
|
|
elsif ($type eq 'file') {
|
|
$args = $dl{'file'};
|
|
$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $args $file $url $dl{'null'}";
|
|
system($cmd);
|
|
$result = ($?) ? 0 : 1; # reverse these into Perl t/f
|
|
$debug_data = $result;
|
|
}
|
|
elsif ( $dl{'dl'} eq 'wget' && $type eq 'spider'){
|
|
$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $dl{'spider'} $url";
|
|
system($cmd);
|
|
$result = ($?) ? 0 : 1; # reverse these into Perl t/f
|
|
$debug_data = $result;
|
|
}
|
|
}
|
|
print "-------\nDownloader Data:\n$cmd\nResult: $debug_data\n" if $test[1];
|
|
log_data('data',"$cmd\nResult: $result") if $b_log;
|
|
return $result;
|
|
}
|
|
|
|
sub get_file {
|
|
my ($type, $url, $file) = @_;
|
|
my $response = HTTP::Tiny->new->get($url);
|
|
my $return = 1;
|
|
my $debug = 0;
|
|
my $fh;
|
|
$file ||= 'N/A';
|
|
log_data('dump','%{$response}',\%{$response}) if $b_log;
|
|
# print Dumper \%{$response};
|
|
if ( ! $response->{success} ){
|
|
my $content = $response->{content};
|
|
$content ||= "N/A\n";
|
|
my $msg = "Failed to connect to server/file!\n";
|
|
$msg .= "Response: ${content}Downloader: HTTP::Tiny URL: $url\nFile: $file";
|
|
log_data('data',$msg) if $b_log;
|
|
print error_defaults('download-error',$msg) if $test[1];
|
|
$return = 0;
|
|
}
|
|
else {
|
|
if ( $debug ){
|
|
print "$response->{success}\n";
|
|
print "$response->{status} $response->{reason}\n";
|
|
while (my ($key, $value) = each %{$response->{headers}}) {
|
|
for (ref $value eq "ARRAY" ? @$value : $value) {
|
|
print "$key: $_\n";
|
|
}
|
|
}
|
|
}
|
|
if ( $type eq "stdout" || $type eq "ua-stdout" ){
|
|
$return = $response->{content};
|
|
}
|
|
elsif ($type eq "spider"){
|
|
# do nothing, just use the return value
|
|
}
|
|
elsif ($type eq "file"){
|
|
open($fh, ">", $file);
|
|
print $fh $response->{content}; # or die "can't write to file!\n";
|
|
close $fh;
|
|
}
|
|
}
|
|
return $return;
|
|
}
|
|
|
|
sub set_downloader {
|
|
eval $start if $b_log;
|
|
$dl{'no-ssl'} = '';
|
|
$dl{'null'} = '';
|
|
$dl{'spider'} = '';
|
|
# we only want to use HTTP::Tiny if it's present in user system.
|
|
# It is NOT part of core modules. IO::Socket::SSL is also required
|
|
# For some https connections so only use tiny as option if both present
|
|
if ($dl{'tiny'}){
|
|
if (check_module('HTTP::Tiny') && check_module('IO::Socket::SSL')){
|
|
import HTTP::Tiny;
|
|
import IO::Socket::SSL;
|
|
$dl{'tiny'} = 1;
|
|
}
|
|
else {
|
|
$dl{'tiny'} = 0;
|
|
}
|
|
}
|
|
#print $dl{'tiny'} . "\n";
|
|
if ($dl{'tiny'}){
|
|
$dl{'dl'} = 'tiny';
|
|
$dl{'file'} = '';
|
|
$dl{'stdout'} = '';
|
|
$dl{'timeout'} = '';
|
|
}
|
|
elsif ( $dl{'curl'} && check_program('curl') ){
|
|
$dl{'dl'} = 'curl';
|
|
$dl{'file'} = ' -L -s -o ';
|
|
$dl{'no-ssl'} = ' --insecure';
|
|
$dl{'stdout'} = ' -L -s ';
|
|
$dl{'timeout'} = ' -y ';
|
|
}
|
|
elsif ($dl{'wget'} && check_program('wget') ){
|
|
$dl{'dl'} = 'wget';
|
|
$dl{'file'} = ' -q -O ';
|
|
$dl{'no-ssl'} = ' --no-check-certificate';
|
|
$dl{'spider'} = ' -q --spider';
|
|
$dl{'stdout'} = ' -q -O -';
|
|
$dl{'timeout'} = ' -T ';
|
|
}
|
|
elsif ($dl{'fetch'} && check_program('fetch')){
|
|
$dl{'dl'} = 'fetch';
|
|
$dl{'file'} = ' -q -o ';
|
|
$dl{'no-ssl'} = ' --no-verify-peer';
|
|
$dl{'stdout'} = ' -q -o -';
|
|
$dl{'timeout'} = ' -T ';
|
|
}
|
|
elsif ( $bsd_type eq 'openbsd' && check_program('ftp') ){
|
|
$dl{'dl'} = 'ftp';
|
|
$dl{'file'} = ' -o ';
|
|
$dl{'null'} = ' 2>/dev/null';
|
|
$dl{'stdout'} = ' -o - ';
|
|
$dl{'timeout'} = '';
|
|
}
|
|
else {
|
|
$dl{'dl'} = '';
|
|
}
|
|
# no-ssl-opt is set to 1 with --no-ssl, so it is true, then assign
|
|
$dl{'no-ssl-opt'} = $dl{'no-ssl'} if $dl{'no-ssl-opt'};
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_perl_downloader {
|
|
my ($downloader) = @_;
|
|
$downloader =~ s/perl/tiny/;
|
|
return $downloader;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### ERROR HANDLER
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub error_handler {
|
|
my ( $err, $one, $two) = @_;
|
|
my ($b_recommends,$b_help,$errno) = (0,0,0);
|
|
my $message = do {
|
|
if ( $err eq 'empty' ) { 'empty value' }
|
|
## Basic rules
|
|
elsif ( $err eq 'not-in-irc' ) {
|
|
$errno=1; "You can't run option $one in an IRC client!" }
|
|
## Internal/external options
|
|
elsif ( $err eq 'bad-arg' ) {
|
|
$errno=10; $b_help=1; "Unsupported value: $two for option: $one" }
|
|
elsif ( $err eq 'bad-arg-int' ) {
|
|
$errno=11; "Bad internal argument: $one" }
|
|
elsif ( $err eq 'distro-block' ) {
|
|
$errno=20; "Option: $one has been disabled by the $self_name distribution maintainer." }
|
|
elsif ( $err eq 'option-feature-incomplete' ) {
|
|
$errno=21; "Option: '$one' feature: '$two' has not been implemented yet." }
|
|
elsif ( $err eq 'unknown-option' ) {
|
|
$errno=22; $b_help=1; "Unsupported option: $one" }
|
|
## Data
|
|
elsif ( $err eq 'open-data' ) {
|
|
$errno=32; "Error opening data for reading: $one \nError: $two" }
|
|
elsif ( $err eq 'download-error' ) {
|
|
$errno=33; "Error downloading file with $dl{'dl'}: $one \nError: $two" }
|
|
## Files:
|
|
elsif ( $err eq 'copy-failed' ) {
|
|
$errno=40; "Error copying file: $one \nError: $two" }
|
|
elsif ( $err eq 'create' ) {
|
|
$errno=41; "Error creating file: $one \nError: $two" }
|
|
elsif ( $err eq 'downloader-error' ) {
|
|
$errno=42; "Error downloading file: $one \nfor download source: $two" }
|
|
elsif ( $err eq 'file-corrupt' ) {
|
|
$errno=43; "Downloaded file is corrupted: $one" }
|
|
elsif ( $err eq 'mkdir' ) {
|
|
$errno=44; "Error creating directory: $one \nError: $two" }
|
|
elsif ( $err eq 'open' ) {
|
|
$errno=45; "Error opening file: $one \nError: $two" }
|
|
elsif ( $err eq 'open-dir' ) {
|
|
$errno=46; "Error opening directory: $one \nError: $two" }
|
|
elsif ( $err eq 'output-file-bad' ) {
|
|
$errno=47; "Value for --output-file must be full path, a writable directory, \nand include file name. Path: $two" }
|
|
elsif ( $err eq 'not-writable' ) {
|
|
$errno=48; "The file: $one is not writable!" }
|
|
elsif ( $err eq 'open-dir-failed' ) {
|
|
$errno=49; "The directory: $one failed to open with error: $two" }
|
|
elsif ( $err eq 'remove' ) {
|
|
$errno=50; "Failed to remove file: $one Error: $two" }
|
|
elsif ( $err eq 'rename' ) {
|
|
$errno=51; "There was an error moving files: $one\nError: $two" }
|
|
elsif ( $err eq 'write' ) {
|
|
$errno=52; "Failed writing file: $one - Error: $two!" }
|
|
## Downloaders
|
|
elsif ( $err eq 'missing-downloader' ) {
|
|
$errno=60; "Downloader program $two could not be located on your system." }
|
|
elsif ( $err eq 'missing-perl-downloader' ) {
|
|
$errno=61; $b_recommends=1; "Perl downloader missing required module." }
|
|
## FTP
|
|
elsif ( $err eq 'ftp-bad-path' ) {
|
|
$errno=70; "Unable to locate for FTP upload file:\n$one" }
|
|
elsif ( $err eq 'ftp-login' ) {
|
|
$errno=71; "There was an error with login to ftp server: $one" }
|
|
elsif ( $err eq 'ftp-upload' ) {
|
|
$errno=72; "There was an error with upload to ftp server: $one" }
|
|
## Modules
|
|
elsif ( $err eq 'required-module' ) {
|
|
$errno=80; $b_recommends=1; "The required $one Perl module is not installed:\n$two" }
|
|
## DEFAULT
|
|
else {
|
|
$errno=255; "Error handler ERROR!! Unsupported options: $err!"}
|
|
};
|
|
print_line("Error $errno: $message\n");
|
|
if ($b_help){
|
|
print_line("Check -h for correct parameters.\n");
|
|
}
|
|
if ($b_recommends){
|
|
print_line("See --recommends for more information.\n");
|
|
}
|
|
exit 0;
|
|
}
|
|
|
|
sub error_defaults {
|
|
my ($type,$one) = @_;
|
|
$one ||= '';
|
|
my %errors = (
|
|
'download-error' => "Download Failure:\n$one\n",
|
|
);
|
|
return $errors{$type};
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### RECOMMENDS
|
|
#### -------------------------------------------------------------------
|
|
|
|
## CheckRecommends
|
|
{
|
|
package CheckRecommends;
|
|
sub run {
|
|
main::error_handler('not-in-irc', 'recommends') if $b_irc;
|
|
my (@data,@rows);
|
|
my $line = make_line();
|
|
my $pm = get_pm();
|
|
@data = basic_data($line);
|
|
push @rows,@data;
|
|
if (!$bsd_type){
|
|
@data = check_items('required system directories',$line,$pm);
|
|
push @rows,@data;
|
|
}
|
|
@data = check_items('recommended system programs',$line,$pm);
|
|
push @rows,@data;
|
|
@data = check_items('recommended display information programs',$line,$pm);
|
|
push @rows,@data;
|
|
@data = check_items('recommended downloader programs',$line,$pm);
|
|
push @rows,@data;
|
|
@data = check_items('recommended Perl modules',$line,$pm);
|
|
push @rows,@data;
|
|
@data = check_items('recommended directories',$line,'');
|
|
push @rows,@data;
|
|
@data = check_items('recommended files',$line,'');
|
|
push @rows,@data;
|
|
@data = (
|
|
['0', '', '', "$line"],
|
|
['0', '', '', "Ok, all done with the checks. Have a nice day."],
|
|
['0', '', '', " "],
|
|
);
|
|
push @rows,@data;
|
|
#print Data::Dumper::Dumper \@rows;
|
|
main::print_basic(@rows);
|
|
exit 1;
|
|
}
|
|
|
|
sub basic_data {
|
|
my ($line) = @_;
|
|
my (@data,@rows);
|
|
my $client = $client{'name-print'};
|
|
$client .= ' ' . $client{'version'} if $client{'version'};
|
|
my $default_shell = 'N/A';
|
|
if ($ENV{'SHELL'}){
|
|
$default_shell = $ENV{'SHELL'};
|
|
$default_shell =~ s/.*\///;
|
|
}
|
|
my $sh = main::check_program('sh');
|
|
my $sh_real = Cwd::abs_path($sh);
|
|
@rows = (
|
|
['0', '', '', "$self_name will now begin checking for the programs it needs
|
|
to operate."],
|
|
['0', '', '', "" ],
|
|
['0', '', '', "Check $self_name --help or the man page (man $self_name)
|
|
to see what options are available." ],
|
|
['0', '', '', "$line" ],
|
|
['0', '', '', "Test: core tools:" ],
|
|
['0', '', '', "" ],
|
|
['0', '', '', "Perl version: ^$]" ],
|
|
['0', '', '', "Current shell: " . $client ],
|
|
['0', '', '', "Default shell: " . $default_shell ],
|
|
['0', '', '', "sh links to: $sh_real" ],
|
|
);
|
|
return @rows;
|
|
}
|
|
sub check_items {
|
|
my ($type,$line,$pm) = @_;
|
|
my (@data,%info,@missing,$row,@rows,$result,@unreadable);
|
|
my ($b_dir,$b_file,$b_module,$b_program,$item);
|
|
my ($about,$extra,$extra2,$extra3,$extra4,$info_os,$install) = ('','','','','','info','');
|
|
if ($type eq 'required system directories'){
|
|
@data = qw(/proc /sys);
|
|
$b_dir = 1;
|
|
$item = 'Directory';
|
|
}
|
|
elsif ($type eq 'recommended system programs'){
|
|
if ($bsd_type){
|
|
@data = qw(camcontrol dig dmidecode fdisk file glabel gpart ifconfig ipmi-sensors
|
|
ipmitool lsusb sudo smartctl sysctl tree uptime usbdevs);
|
|
$info_os = 'info-bsd';
|
|
}
|
|
else {
|
|
@data = qw(dig dmidecode fdisk file hddtemp ifconfig ip ipmitool ipmi-sensors
|
|
lsblk lsusb modinfo runlevel sensors strings sudo tree uptime);
|
|
}
|
|
$b_program = 1;
|
|
$item = 'Program';
|
|
$extra2 = "Note: IPMI sensors are generally only found on servers. To access
|
|
that data, you only need one of the ipmi items.";
|
|
}
|
|
elsif ($type eq 'recommended display information programs'){
|
|
if ($bsd_type){
|
|
@data = qw(glxinfo wmctrl xdpyinfo xprop xrandr);
|
|
$info_os = 'info-bsd';
|
|
}
|
|
else {
|
|
@data = qw(glxinfo wmctrl xdpyinfo xprop xrandr);
|
|
}
|
|
$b_program = 1;
|
|
$item = 'Program';
|
|
}
|
|
elsif ($type eq 'recommended downloader programs'){
|
|
if ($bsd_type){
|
|
@data = qw(curl dig fetch ftp wget);
|
|
$info_os = 'info-bsd';
|
|
}
|
|
else {
|
|
@data = qw(curl dig wget);
|
|
}
|
|
$b_program = 1;
|
|
$extra = ' (You only need one of these)';
|
|
$extra2 = "Perl HTTP::Tiny is the default downloader tool if IO::Socket::SSL is present.
|
|
See --help --alt 40-44 options for how to override default downloader(s) in case of issues. ";
|
|
$extra3 = "If dig is installed, it is the default for WAN IP data.
|
|
Strongly recommended. Dig is fast and accurate.";
|
|
$extra4 = ". However, you really only need dig in most cases. All systems should have ";
|
|
$extra4 .= "at least one of the downloader options present.";
|
|
$item = 'Program';
|
|
}
|
|
elsif ($type eq 'recommended Perl modules'){
|
|
@data = qw(HTTP::Tiny IO::Socket::SSL Time::HiRes Cpanel::JSON::XS JSON::XS XML::Dumper);
|
|
$b_module = 1;
|
|
$item = 'Perl Module';
|
|
$extra = ' (Optional)';
|
|
$extra2 = "None of these are strictly required, but if you have them all, you can eliminate
|
|
some recommended non Perl programs from the install. ";
|
|
$extra3 = "HTTP::Tiny and IO::Socket::SSL must both be present to use as a downloader option.
|
|
For json export Cpanel::JSON::XS is preferred over JSON::XS.";
|
|
}
|
|
elsif ($type eq 'recommended directories'){
|
|
if ($bsd_type){
|
|
@data = qw(/dev);
|
|
}
|
|
else {
|
|
@data = qw(/dev /dev/disk/by-id /dev/disk/by-label /dev/disk/by-path
|
|
/dev/disk/by-uuid /sys/class/dmi/id);
|
|
}
|
|
$b_dir = 1;
|
|
$item = 'Directory';
|
|
}
|
|
elsif ($type eq 'recommended files'){
|
|
if ($bsd_type){
|
|
@data = qw(/var/run/dmesg.boot /var/log/Xorg.0.log);
|
|
}
|
|
else {
|
|
@data = qw(/etc/lsb-release /etc/os-release /proc/asound/cards
|
|
/proc/asound/version /proc/cpuinfo /proc/mdstat /proc/meminfo /proc/modules
|
|
/proc/mounts /proc/scsi/scsi /var/log/Xorg.0.log );
|
|
}
|
|
$b_file = 1;
|
|
$item = 'File';
|
|
$extra2 = "Note that not all of these are used by every system,
|
|
so if one is missing it's usually not a big deal.";
|
|
}
|
|
@rows = (
|
|
['0', '', '', "$line" ],
|
|
['0', '', '', "Test: $type$extra:" ],
|
|
['0', '', '', " " ],
|
|
);
|
|
if ($extra2){
|
|
$rows[scalar @rows] = (['0', '', '', $extra2]);
|
|
$rows[scalar @rows] = (['0', '', '', ' ']);
|
|
}
|
|
if ($extra3){
|
|
$rows[scalar @rows] = (['0', '', '', $extra3]);
|
|
$rows[scalar @rows] = (['0', '', '', ' ']);
|
|
}
|
|
foreach (@data){
|
|
$install = '';
|
|
$about = '';
|
|
%info = item_data($_);
|
|
$about = $info{$info_os};
|
|
if ( ( $b_dir && -d $_ ) || ( $b_file && -r $_ ) ||
|
|
($b_program && main::check_program($_) ) || ($b_module && main::check_module($_)) ){
|
|
$result = 'Present';
|
|
}
|
|
elsif ($b_file && -f $_){
|
|
$result = 'Unreadable';
|
|
push @unreadable, "$_";
|
|
}
|
|
else {
|
|
$result = 'Missing';
|
|
$install = " ~ Install package: $info{$pm}" if (($b_program || $b_module) && $pm);
|
|
push @missing, "$_$install";
|
|
}
|
|
$row = make_row($_,$about,$result);
|
|
$rows[scalar @rows] = (['0', '', '', $row]);
|
|
}
|
|
$rows[scalar @rows] = (['0', '', '', " "]);
|
|
if (@missing){
|
|
$rows[scalar @rows] = (['0', '', '', "The following $type are missing$extra4:"]);
|
|
foreach (@missing) {
|
|
$rows[scalar @rows] = (['0', '', '', "$item: $_"]);
|
|
}
|
|
}
|
|
if (@unreadable){
|
|
$rows[scalar @rows] = (['0', '', '', "The following $type are not readable: "]);
|
|
foreach (@unreadable) {
|
|
$rows[scalar @rows] = (['0', '', '', "$item: $_"]);
|
|
}
|
|
}
|
|
if (!@missing && !@unreadable){
|
|
$rows[scalar @rows] = (['0', '', '', "All $type are present"]);
|
|
}
|
|
return @rows;
|
|
}
|
|
|
|
sub item_data {
|
|
my ($type) = @_;
|
|
my %data = (
|
|
# directory data
|
|
'/sys/class/dmi/id' => ({
|
|
'info' => '-M system, motherboard, bios',
|
|
}),
|
|
'/dev' => ({
|
|
'info' => '-l,-u,-o,-p,-P,-D disk partition data',
|
|
}),
|
|
'/dev/disk/by-id' => ({
|
|
'info' => '-D serial numbers',
|
|
}),
|
|
'/dev/disk/by-path' => ({
|
|
'info' => '-D extra data',
|
|
}),
|
|
'/dev/disk/by-label' => ({
|
|
'info' => '-l,-o,-p,-P partition labels',
|
|
}),
|
|
'/dev/disk/by-uuid' => ({
|
|
'info' => '-u,-o,-p,-P partition uuid',
|
|
}),
|
|
'/proc' => ({
|
|
'info' => '',
|
|
}),
|
|
'/sys' => ({
|
|
'info' => '',
|
|
}),
|
|
# file data
|
|
'/etc/lsb-release' => ({
|
|
'info' => '-S distro version data (older version)',
|
|
}),
|
|
'/etc/os-release' => ({
|
|
'info' => '-S distro version data (newer version)',
|
|
}),
|
|
'/proc/asound/cards' => ({
|
|
'info' => '-A sound card data',
|
|
}),
|
|
'/proc/asound/version' => ({
|
|
'info' => '-A ALSA data',
|
|
}),
|
|
'/proc/cpuinfo' => ({
|
|
'info' => '-C cpu data',
|
|
}),
|
|
'/proc/mdstat' => ({
|
|
'info' => '-R mdraid data (if you use dm-raid)',
|
|
}),
|
|
'/proc/meminfo' => ({
|
|
'info' => '-I,-tm, -m memory data',
|
|
}),
|
|
'/proc/modules' => ({
|
|
'info' => '-G module data (sometimes)',
|
|
}),
|
|
'/proc/mounts' => ({
|
|
'info' => '-P,-p partition advanced data',
|
|
}),
|
|
'/proc/scsi/scsi' => ({
|
|
'info' => '-D Advanced hard disk data (used rarely)',
|
|
}),
|
|
'/var/log/Xorg.0.log' => ({
|
|
'info' => '-G graphics driver load status',
|
|
}),
|
|
'/var/run/dmesg.boot' => ({
|
|
'info' => '-D,-d disk data',
|
|
}),
|
|
# system tools
|
|
# apt-dpkg,apt-get; pm-arch,pacman; rpm-redhat,suse
|
|
'curl' => ({
|
|
'info' => '-i (if no dig); -w,-W; -U',
|
|
'info-bsd' => '-i (if no dig); -w,-W; -U',
|
|
'apt' => 'curl',
|
|
'pacman' => 'curl',
|
|
'rpm' => 'curl',
|
|
}),
|
|
'camcontrol' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-R; -D; -P. Get actual gptid /dev path',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'dig' => ({
|
|
'info' => '-i wlan IP',
|
|
'info-bsd' => '-i wlan IP',
|
|
'apt' => 'dnsutils',
|
|
'pacman' => 'dnsutils',
|
|
'rpm' => 'bind-utils',
|
|
}),
|
|
'dmidecode' => ({
|
|
'info' => '-M if no sys machine data; -m',
|
|
'info-bsd' => '-M if null sysctl; -m; -B if null sysctl',
|
|
'apt' => 'dmidecode',
|
|
'pacman' => 'dmidecode',
|
|
'rpm' => 'dmidecode',
|
|
}),
|
|
'fdisk' => ({
|
|
'info' => '-D partition scheme (fallback)',
|
|
'info-bsd' => '-D partition scheme',
|
|
'apt' => 'fdisk',
|
|
'pacman' => 'util-linux',
|
|
'rpm' => 'util-linux',
|
|
}),
|
|
'fetch' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-i (if no dig); -w,-W; -U',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'file' => ({
|
|
'info' => '-o unmounted file system (if no lsblk)',
|
|
'info-bsd' => '-o unmounted file system',
|
|
'apt' => 'file',
|
|
'pacman' => 'file',
|
|
'rpm' => 'file',
|
|
}),
|
|
'ftp' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-i (if no dig); -w,-W; -U',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'glabel' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-R; -D; -P. Get actual gptid /dev path',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'gpart' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-p,-P file system, size',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'hciconfig' => ({
|
|
'info' => 'Experimental',
|
|
'info-bsd' => '',
|
|
'apt' => 'bluez',
|
|
'pacman' => 'bluez-utils',
|
|
'rpm' => 'bluez-utils',
|
|
}),
|
|
'hddtemp' => ({
|
|
'info' => '-Dx show hdd temp',
|
|
'info-bsd' => '-Dx show hdd temp',
|
|
'apt' => 'hddtemp',
|
|
'pacman' => 'hddtemp',
|
|
'rpm' => 'hddtemp',
|
|
}),
|
|
'ifconfig' => ({
|
|
'info' => '-i ip LAN (deprecated)',
|
|
'info-bsd' => '-i ip LAN',
|
|
'apt' => 'net-tools',
|
|
'pacman' => 'net-tools',
|
|
'rpm' => 'net-tools',
|
|
}),
|
|
'ip' => ({
|
|
'info' => '-i ip LAN',
|
|
'info-bsd' => '',
|
|
'apt' => 'iproute',
|
|
'pacman' => 'iproute2',
|
|
'rpm' => 'iproute',
|
|
}),
|
|
'ipmi-sensors' => ({
|
|
'info' => '-s IPMI sensors (servers)',
|
|
'info-bsd' => '',
|
|
'apt' => 'freeipmi-tools',
|
|
'pacman' => 'freeipmi',
|
|
'rpm' => 'freeipmi',
|
|
}),
|
|
'ipmitool' => ({
|
|
'info' => '-s IPMI sensors (servers)',
|
|
'info-bsd' => '-s IPMI sensors (servers)',
|
|
'apt' => 'ipmitool',
|
|
'pacman' => 'ipmitool',
|
|
'rpm' => 'ipmitool',
|
|
}),
|
|
'lsblk' => ({
|
|
'info' => '-o unmounted file system (best option)',
|
|
'info-bsd' => '-o unmounted file system',
|
|
'apt' => 'util-linux',
|
|
'pacman' => 'util-linux',
|
|
'rpm' => 'util-linux-ng',
|
|
}),
|
|
'lsusb' => ({
|
|
'info' => '-A usb audio; -N usb networking; --usb',
|
|
'info-bsd' => '-A; -N; --usb. Alternate to usbdevs',
|
|
'apt' => 'usbutils',
|
|
'pacman' => 'usbutils',
|
|
'rpm' => 'usbutils',
|
|
}),
|
|
'modinfo' => ({
|
|
'info' => 'Ax; -Nx module version',
|
|
'info-bsd' => '',
|
|
'apt' => 'module-init-tools',
|
|
'pacman' => 'module-init-tools',
|
|
'rpm' => 'module-init-tools',
|
|
}),
|
|
'runlevel' => ({
|
|
'info' => '-I fallback to Perl',
|
|
'info-bsd' => '',
|
|
'apt' => 'systemd or sysvinit',
|
|
'pacman' => 'systemd',
|
|
'rpm' => 'systemd or sysvinit',
|
|
}),
|
|
'sensors' => ({
|
|
'info' => '-s sensors output',
|
|
'info-bsd' => '',
|
|
'apt' => 'lm-sensors',
|
|
'pacman' => 'lm-sensors',
|
|
'rpm' => 'lm-sensors',
|
|
}),
|
|
'smartctl' => ({
|
|
'info' => '-Dx show hdd temp',
|
|
'info-bsd' => '-Dx show hdd temp',
|
|
'apt' => '',
|
|
'pacman' => '',
|
|
'rpm' => '',
|
|
}),
|
|
'strings' => ({
|
|
'info' => '-I sysvinit version',
|
|
'info-bsd' => '',
|
|
'apt' => 'binutils',
|
|
'pacman' => '?',
|
|
'rpm' => '?',
|
|
}),
|
|
'sysctl' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-C; -I; -m; -tm',
|
|
'apt' => '?',
|
|
'pacman' => '?',
|
|
'rpm' => '?',
|
|
}),
|
|
'sudo' => ({
|
|
'info' => '-Dx hddtemp-user; -o file-user',
|
|
'info-bsd' => '-Dx hddtemp-user; -o file-user',
|
|
'apt' => 'sudo',
|
|
'pacman' => 'sudo',
|
|
'rpm' => 'sudo',
|
|
}),
|
|
'tree' => ({
|
|
'info' => '--debugger 20,21 /sys tree',
|
|
'info-bsd' => '--debugger 20,21 /sys tree',
|
|
'apt' => 'tree',
|
|
'pacman' => 'tree',
|
|
'rpm' => 'tree',
|
|
}),
|
|
'uptime' => ({
|
|
'info' => '-I uptime',
|
|
'info-bsd' => '-I uptime',
|
|
'apt' => 'procps',
|
|
'pacman' => 'procps',
|
|
'rpm' => 'procps',
|
|
}),
|
|
'usbdevs' => ({
|
|
'info' => '',
|
|
'info-bsd' => '-A; -N; --usb;',
|
|
'apt' => 'usbutils',
|
|
'pacman' => 'usbutils',
|
|
'rpm' => 'usbutils',
|
|
}),
|
|
'wget' => ({
|
|
'info' => '-i (if no dig); -w,-W; -U',
|
|
'info-bsd' => '-i (if no dig); -w,-W; -U',
|
|
'apt' => 'wget',
|
|
'pacman' => 'wget',
|
|
'rpm' => 'wget',
|
|
}),
|
|
# display tools
|
|
'glxinfo' => ({
|
|
'info' => '-G glx info',
|
|
'info-bsd' => '-G glx info',
|
|
'apt' => 'mesa-utils',
|
|
'pacman' => 'mesa-demos',
|
|
'rpm' => 'glx-utils (openSUSE 12.3 and later Mesa-demo-x)',
|
|
}),
|
|
'wmctrl' => ({
|
|
'info' => '-S active window manager (not all wm)',
|
|
'info-bsd' => '-S active window managerr (not all wm)',
|
|
'apt' => 'wmctrl',
|
|
'pacman' => 'wmctrl',
|
|
'rpm' => 'wmctrl',
|
|
}),
|
|
'xdpyinfo' => ({
|
|
'info' => '-G multi screen resolution',
|
|
'info-bsd' => '-G multi screen resolution',
|
|
'apt' => 'X11-utils',
|
|
'pacman' => 'xorg-xdpyinfo',
|
|
'rpm' => 'xorg-x11-utils',
|
|
}),
|
|
'xprop' => ({
|
|
'info' => '-S desktop data',
|
|
'info-bsd' => '-S desktop data',
|
|
'apt' => 'X11-utils',
|
|
'pacman' => 'xorg-xprop',
|
|
'rpm' => 'x11-utils',
|
|
}),
|
|
'xrandr' => ({
|
|
'info' => '-G single screen resolution',
|
|
'info-bsd' => '-G single screen resolution',
|
|
'apt' => 'x11-xserver-utils',
|
|
'pacman' => 'xrandr',
|
|
'rpm' => 'x11-server-utils',
|
|
}),
|
|
# Perl modules
|
|
'Cpanel::JSON::XS' => ({
|
|
'info' => '--output json - required for export.',
|
|
'info-bsd' => '--output json - required for export.',
|
|
'apt' => 'libcpanel-json-xs-perl',
|
|
'pacman' => 'perl-cpanel-json-xs',
|
|
'rpm' => 'perl-Cpanel-JSON-XS',
|
|
}),
|
|
'HTTP::Tiny' => ({
|
|
'info' => '-U; -w,-W; -i (if dig not installed).',
|
|
'info-bsd' => '-U; -w,-W; -i (if dig not installed)',
|
|
'apt' => 'libhttp-tiny-perl',
|
|
'pacman' => 'Core Modules',
|
|
'rpm' => 'Perl-http-tiny',
|
|
}),
|
|
'IO::Socket::SSL' => ({
|
|
'info' => '-U; -w,-W; -i (if dig not installed).',
|
|
'info-bsd' => '-U; -w,-W; -i (if dig not installed)',
|
|
'apt' => 'libio-socket-ssl-perl',
|
|
'pacman' => 'perl-io-socket-ssl',
|
|
'rpm' => 'perl-IO-Socket-SSL',
|
|
}),
|
|
'JSON::XS' => ({
|
|
'info' => '--output json - required for export (legacy).',
|
|
'info-bsd' => '--output json - required for export (legacy).',
|
|
'apt' => 'libjson-xs-perl',
|
|
'pacman' => 'perl-json-xs',
|
|
'rpm' => 'perl-JSON-XS',
|
|
}),
|
|
'Time::HiRes' => ({
|
|
'info' => '-C cpu sleep (not required); --debug timers',
|
|
'info-bsd' => '-C cpu sleep (not required); --debug timers',
|
|
'apt' => 'Core Modules',
|
|
'pacman' => 'Core Modules',
|
|
'rpm' => 'perl-Time-HiRes',
|
|
}),
|
|
'XML::Dumper' => ({
|
|
'info' => '--output xml - Crude and raw.',
|
|
'info-bsd' => '--output xml - Crude and raw.',
|
|
'apt' => 'libxml-dumper-perl',
|
|
'pacman' => 'perl-xml-dumper',
|
|
'rpm' => 'perl-XML-Dumper',
|
|
}),
|
|
);
|
|
my $ref = $data{$type};
|
|
my %values = %$ref;
|
|
return %values;
|
|
}
|
|
sub get_pm {
|
|
my ($pm) = ('');
|
|
if (main::check_program('dpkg')){
|
|
$pm = 'apt';
|
|
}
|
|
elsif (main::check_program('pacman')){
|
|
$pm = 'pacman';
|
|
}
|
|
elsif (main::check_program('rpm')){
|
|
$pm = 'rpm';
|
|
}
|
|
return $pm;
|
|
}
|
|
# note: end will vary, but should always be treated as longest value possible.
|
|
# expected values: Present/Missing
|
|
sub make_row {
|
|
my ($start,$middle,$end) = @_;
|
|
my ($dots,$line,$sep) = ('','',': ');
|
|
foreach (0 .. ($size{'max'} - 16 - length("$start$middle"))){
|
|
$dots .= '.';
|
|
}
|
|
$line = "$start$sep$middle$dots $end";
|
|
return $line;
|
|
}
|
|
sub make_line {
|
|
my $line = '';
|
|
foreach (0 .. $size{'max'} - 2 ){
|
|
$line .= '-';
|
|
}
|
|
return $line;
|
|
}
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### TOOLS
|
|
#### -------------------------------------------------------------------
|
|
|
|
# Duplicates the functionality of awk to allow for one liner
|
|
# type data parsing. note: -1 corresponds to awk NF
|
|
# args 1: array of data; 2: search term; 3: field result; 4: separator
|
|
# correpsonds to: awk -F='separator' '/search/ {print $2}' <<< @data
|
|
# array is sent by reference so it must be dereferenced
|
|
# NOTE: if you just want the first row, pass it \S as search string
|
|
# NOTE: if $num is undefined, it will skip the second step
|
|
sub awk {
|
|
eval $start if $b_log;
|
|
my ($ref,$search,$num,$sep) = @_;
|
|
my ($result);
|
|
# print "search: $search\n";
|
|
return if ! @$ref || ! $search;
|
|
foreach (@$ref){
|
|
if (/$search/i){
|
|
$result = $_;
|
|
$result =~ s/^\s+|\s+$//g;
|
|
last;
|
|
}
|
|
}
|
|
if ($result && defined $num){
|
|
$sep ||= '\s+';
|
|
$num-- if $num > 0; # retain the negative values as is
|
|
$result = (split /$sep/, $result)[$num];
|
|
$result =~ s/^\s+|,|\s+$//g if $result;
|
|
}
|
|
eval $end if $b_log;
|
|
return $result;
|
|
}
|
|
|
|
# $1 - Perl module to check
|
|
sub check_module {
|
|
my ($module) = @_;
|
|
my $b_present = 0;
|
|
eval "require $module";
|
|
$b_present = 1 if !$@;
|
|
return $b_present;
|
|
}
|
|
|
|
# arg: 1 - string or path to search gneerated @paths data for.
|
|
# note: a few nano seconds are saved by using raw $_[0] for program
|
|
sub check_program {
|
|
(grep { return "$_/$_[0]" if -e "$_/$_[0]"} @paths)[0];
|
|
}
|
|
|
|
sub cleanup {
|
|
# maybe add in future: , $fh_c, $fh_j, $fh_x
|
|
foreach my $fh ($fh_l){
|
|
if ($fh){
|
|
close $fh;
|
|
}
|
|
}
|
|
}
|
|
|
|
# returns count of files in directory, if 0, dir is empty
|
|
sub count_dir_files {
|
|
return unless -d $_[0];
|
|
opendir my $dh, $_[0] or error_handler('open-dir-failed', "$_[0]", $!);
|
|
my $count = grep { ! /^\.{1,2}/ } readdir $dh; # strips out . and ..
|
|
return $count;
|
|
}
|
|
|
|
# args: 1 - the string to get piece of
|
|
# 2 - the position in string, starting at 1 for 0 index.
|
|
# 3 - the separator, default is ' '
|
|
sub get_piece {
|
|
eval $start if $b_log;
|
|
my ($string, $num, $sep) = @_;
|
|
$num--;
|
|
$sep ||= '\s+';
|
|
$string =~ s/^\s+|\s+$//g;
|
|
my @temp = split(/$sep/, $string);
|
|
eval $end if $b_log;
|
|
if ( exists $temp[$num] ){
|
|
$temp[$num] =~ s/,//g;
|
|
return $temp[$num];
|
|
}
|
|
}
|
|
|
|
# arg: 1 - command to turn into an array; 2 - optional: splitter
|
|
# 3 - optionsl, strip and clean data
|
|
# similar to reader() except this creates an array of data
|
|
# by lines from the command arg
|
|
sub grabber {
|
|
eval $start if $b_log;
|
|
my ($cmd,$split,$strip) = @_;
|
|
$split ||= "\n";
|
|
my @rows = split /$split/, qx($cmd);
|
|
if ($strip && @rows){
|
|
@rows = grep {/^\s*[^#]/} @rows;
|
|
@rows = map {s/^\s+|\s+$//g; $_} @rows if @rows;
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
# args: 1 - string value to glob
|
|
sub globber {
|
|
eval $start if $b_log;
|
|
my @files = <$_[0]>;
|
|
eval $end if $b_log;
|
|
return @files;
|
|
}
|
|
|
|
# gets array ref, which may be undefined, plus join string
|
|
# this helps avoid debugger print errors when we are printing arrays
|
|
# which we don't know are defined or not null.
|
|
# args: 1 - array ref; 2 - join string; 3 - default value, optional
|
|
sub joiner {
|
|
my ($ref,$join,$default) = @_;
|
|
my @arr = @$ref;
|
|
$default ||= '';
|
|
my $string = '';
|
|
foreach (@arr){
|
|
if (defined $_){
|
|
$string .= $_ . $join;
|
|
}
|
|
else {
|
|
$string .= $default . $join;
|
|
}
|
|
}
|
|
return $string;
|
|
}
|
|
|
|
# returns array of:
|
|
# 0 - match string; 1 - search number; 2 - version string; 3 - Print name
|
|
# 4 - console 0/1; 5 - 0/1 exit version loop at first iteration;
|
|
# 6 - 0/1 write to stderr
|
|
# arg: 1 - program lower case name
|
|
sub program_values {
|
|
my ($app) = @_;
|
|
my (@client_data);
|
|
my %data = (
|
|
## Clients
|
|
'bitchx' => ['bitchx',2,'','BitchX',1,0,0],# special
|
|
'finch' => ['finch',2,'-v','Finch',1,1,0],
|
|
'gaim' => ['[0-9.]+',2,'-v','Gaim',0,1,0],
|
|
'ircii' => ['[0-9.]+',3,'-v','ircII',1,1,0],
|
|
'irssi' => ['irssi',2,'-v','Irssi',1,1,0],
|
|
'irssi-text' => ['irssi',2,'-v','Irssi',1,1,0],
|
|
'konversation' => ['konversation',2,'-v','Konversation',0,0,0],
|
|
'kopete' => ['Kopete',2,'-v','Kopete',0,0,0],
|
|
'kvirc' => ['[0-9.]+',2,'-v','KVIrc',0,0,1], # special
|
|
'pidgin' => ['[0-9.]+',2,'-v','Pidgin',0,1,0],
|
|
'quassel' => ['',1,'-v','Quassel [M]',0,0,0], # special
|
|
'quasselclient' => ['',1,'-v','Quassel',0,0,0],# special
|
|
'quasselcore' => ['',1,'-v','Quassel (core)',0,0,0],# special
|
|
'gribble' => ['^Supybot',2,'--version','Gribble',1,0,0],# special
|
|
'limnoria' => ['^Supybot',2,'--version','Limnoria',1,0,0],# special
|
|
'supybot' => ['^Supybot',2,'--version','Supybot',1,0,0],# special
|
|
'weechat' => ['[0-9.]+',1,'-v','WeeChat',1,0,0],
|
|
'weechat-curses' => ['[0-9.]+',1,'-v','WeeChat',1,0,0],
|
|
'xchat-gnome' => ['[0-9.]+',2,'-v','X-Chat-Gnome',1,1,0],
|
|
'xchat' => ['[0-9.]+',2,'-v','X-Chat',1,1,0],
|
|
## Desktops
|
|
'afterstep' => ['^afterstep',3,'--version','AfterStep',0,1,0],
|
|
'awesome' => ['^awesome',2,'--version','Awesome',0,1,0],
|
|
'blackbox' => ['^Blackbox',2,'--version','Blackbox',0,1,0],
|
|
'budgie' => ['^budgie-desktop',2,'--version','Budgie',0,1,0],
|
|
'cinnamon' => ['^cinnamon',2,'--version','Cinnamon',0,1,0],
|
|
'dwm' => ['^dwm',1,'-v','dwm',0,1,1],
|
|
'fluxbox' => ['^fluxbox',2,'--version','Fluxbox',0,1,0],
|
|
'fvwm' => ['^fvwm',2,'--version','FVWM',0,0,1],
|
|
# command: fvwm
|
|
'fvwm-crystal' => ['^fvwm',2,'--version','FVWM-Crystal',0,0,0],
|
|
'gnome-about' => ['gnome',3,'--version','Gnome',0,1,0],
|
|
'gnome-shell' => ['gnome',3,'--version','Gnome',0,1,0],
|
|
'herbstluftwm' => ['^herbstluftwm',-1,'--version','herbstluftwm',0,1,0],
|
|
'jwm' => ['^jwm',2,'--version','JWM',0,1,0],
|
|
# i3 version 4.13 (2016-11-08) © 2009 Michael Stapelberg and contributors
|
|
'i3' => ['^i3',3,'--version','i3',0,1,0],
|
|
'icewm' => ['^icewm',2,'--version','IceWM',0,1,0],
|
|
'kded' => ['^KDE Development Platform:',4,'--version','KDE',0,1,0],
|
|
'kded1' => ['^KDE Development Platform:',4,'--version','KDE',0,1,0],
|
|
'kded2' => ['^KDE Development Platform:',4,'--version','KDE',0,1,0],
|
|
'kded3' => ['^KDE Development Platform:',4,'--version','KDE',0,1,0],
|
|
'kded4' => ['^KDE Development Platform:',4,'--version','KDE',0,1,0],
|
|
# command: lxqt-about
|
|
'lxqt' => ['^lxqt-about',2,'--version','LXQT',0,1,0],
|
|
'mate-about' => ['^MATE[[:space:]]DESKTOP',-1,'--version','MATE',0,1,0],
|
|
# note, mate-session when launched with full path returns full path in version string
|
|
'mate-session' => ['mate-session',-1,'--version','MATE',0,1,0],
|
|
'openbox' => ['^openboxt',2,'--version','Openbox',0,1,0],
|
|
'pekwm' => ['^pekwm',3,'--version','pekwm',0,1,0],
|
|
'plasmashell' => ['^plasmashell',2,'--version','KDE Plasma',0,1,0],
|
|
'qtdiag' => ['^qt',2,'--version','Qt',0,1,0],
|
|
'sawfish' => ['^sawfish',3,'--version','Sawfish',0,1,0],
|
|
'scrotwm' => ['^welcome.*scrotwm',4,'-v','Scrotwm',0,1,1],
|
|
'spectrwm' => ['^spectrwm.*welcome.*spectrwm',5,'-v','Spectrwm',0,1,0],
|
|
'unity' => ['^unity',2,'--version','Unity',0,1,0],
|
|
'wm2' => ['^wm2',-1,'--version','WM2',0,1,0],
|
|
'wmaker' => ['^Window[[:space:]]*Maker',-1,'--version','WindowMaker',0,1,0],
|
|
'wmii' => ['^wmii',1,'--version','wmii',0,1,0], # note: in debian, wmii is wmii3
|
|
'wmii2' => ['^wmii2',1,'--version','wmii2',0,1,0],
|
|
'xfce4-panel' => ['^xfce4-panel',2,'--version','Xfce',0,1,0],
|
|
'xfce5-panel' => ['^xfce5-panel',2,'--version','Xfce',0,1,0],
|
|
'xfdesktop' => ['xfdesktop[[:space:]]version',5,'--version','Xfce',0,1,0],
|
|
# command: xfdesktop
|
|
'xfdesktop-toolkit' => ['Built[[:space:]]with[[:space:]]GTK',4,'--version','Gtk',0,1,0],
|
|
## Shells
|
|
'bash' => ['^GNU[[:space:]]bash,[[:space:]]version',4,'--version','Bash',1,0,0],
|
|
'csh' => ['^tcsh',2,'--version','csh',1,0,0],
|
|
'dash' => ['dash',3,'--version','Dash',1,0,0], # no version, uses dpkg query, sigh
|
|
# ksh/lksh/mksh/pdksh can't be handled with version but we'll use the search string to
|
|
# trigger version return and tests
|
|
'ksh' => ['ksh',5,'-v','ksh',1,0,0],
|
|
'lksh' => ['ksh',5,'-v','lksh',1,0,0],
|
|
'loksh' => ['ksh',5,'-v','lksh',1,0,0],
|
|
'mksh' => ['ksh',5,'-v','mksh',1,0,0],
|
|
'pdksh' => ['ksh',5,'-v','pdksh',1,0,0],
|
|
'tcsh' => ['^tcsh',2,'--version','tcsh',1,0,0],
|
|
'zsh' => ['^zsh',2,'--version','zsh',1,0,0],
|
|
## Tools
|
|
'clang' => ['clang',3,'--version','Clang',1,0,0],
|
|
'gcc' => ['^gcc',3,'--version','GCC',1,0,0],
|
|
'gcc-apple' => ['Apple[[:space:]]LLVM',2,'--version','LLVM',1,0,0],
|
|
'sudo' => ['^Sudo',3,'-V','Sudo',1,1,0], # sudo pre 1.7 does not have --version
|
|
);
|
|
if ( defined $data{$app} ){
|
|
my $ref = $data{$app};
|
|
@client_data = @$ref;
|
|
}
|
|
#my $debug = main::Dumper \@client_data;
|
|
main::log_data('dump',"Client Data",\@client_data) if $b_log;
|
|
return @client_data;
|
|
}
|
|
|
|
# args: 1 - desktop/app command for --version; 2 - search string;
|
|
# 3 - space print number; 4 - [optional] version arg: -v, version, etc
|
|
# 5 - [optional] exit first find 0/1; 6 - [optional] 0/1 stderr output
|
|
sub program_version {
|
|
eval $start if $b_log;
|
|
my ($app, $search, $num,$version,$exit,$b_stderr) = @_;
|
|
my ($cmd,$line,$output);
|
|
my $version_nu = '';
|
|
my $count = 0;
|
|
$exit ||= 100; # basically don't exit ever
|
|
$version ||= '--version';
|
|
# adjust to array index, not human readable
|
|
$num-- if (defined $num && $num > 0);
|
|
# ksh: Version JM 93t+ 2010--03-05
|
|
# mksh: @(#)MIRBSD KSH R56 2018/03/09
|
|
# loksh: @(#)PD KSH v5.2.14 99/07/13.2
|
|
# --version opens a new ksh, sigh... This so far does not work
|
|
# because the ENV/Shell variable is not visible in subshells
|
|
if ($search eq 'ksh'){
|
|
my $ksh = system('echo -n $KSH_VERSION');
|
|
if ( $ksh ){
|
|
my @temp = split /\s+/, $ksh;
|
|
if ($temp[2]){
|
|
$temp[2] =~ s/^v//i; # trim off leading v
|
|
log_data('data',"Program *ksh array: @temp version: $temp[2]") if $b_log;
|
|
return $temp[2];
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
# konvi in particular doesn't like using $ENV{'PATH'} as set, so we need
|
|
# to always assign the full path if it hasn't already been done
|
|
if ( $app !~ /^\// ){
|
|
if (my $program = check_program($app) ){
|
|
$app = $program;
|
|
}
|
|
else {
|
|
log_data('data',"$app not found in path.");
|
|
return 0;
|
|
}
|
|
}
|
|
# note, some wm/apps send version info to stderr instead of stdout
|
|
if ( $b_stderr ) {
|
|
$cmd = "$app $version 2>&1";
|
|
}
|
|
# elsif ( $app eq 'csh' ){
|
|
# $app = 'tcsh';
|
|
# }
|
|
# quick debian/buntu hack until I find a universal way to get version for these
|
|
elsif ( $app eq 'dash' ){
|
|
$cmd = "dpkg -l $app 2>/dev/null";
|
|
}
|
|
else {
|
|
$cmd = "$app $version 2>/dev/null";
|
|
}
|
|
log_data('data',"version: $version num: $num search: $search command: $cmd") if $b_log;
|
|
$output = qx($cmd);
|
|
# print "$cmd : $output\n";
|
|
# sample: dwm-5.8.2, ©.. etc, why no space? who knows. Also get rid of v in number string
|
|
# xfce, and other, output has , in it, so dump all commas and parentheses
|
|
if ($output){
|
|
open my $ch, '<', \$output or error_handler('open-data',"$cmd", "$!");
|
|
while (<$ch>){
|
|
#chomp;
|
|
last if $count > $exit;
|
|
if ( $_ =~ /$search/i ) {
|
|
$_ = trimmer($_);
|
|
# print "$_ ::$num\n";
|
|
my @data = split /\s+/, $_;
|
|
$version_nu = $data[$num];
|
|
last if ! defined $version_nu;
|
|
# some distros add their distro name before the version data, which
|
|
# breaks version detection. A quick fix attempt is to just add 1 to $num
|
|
# to get the next value.
|
|
$version_nu = $data[$num+1] if $data[$num+1] && $version_nu =~ /version/i;
|
|
$version_nu =~ s/(\([^)]+\)|,|dwm-|wmii2-|wmii-|\||\(|\))//g if $version_nu;
|
|
# trim off leading v but only when followed by a number
|
|
$version_nu =~ s/^v([0-9])/$1/i if $version_nu;
|
|
# print "$version_nu\n";
|
|
last;
|
|
}
|
|
$count++;
|
|
}
|
|
close $ch if $ch;
|
|
}
|
|
log_data('data',"Program version: $version_nu") if $b_log;
|
|
eval $end if $b_log;
|
|
return $version_nu;
|
|
}
|
|
# print program_version('bash', 'bash', 4) . "\n";
|
|
|
|
# arg: 1 - full file path, returns array of file lines.
|
|
# 2 - optionsl, strip and clean data
|
|
# note: chomp has to chomp the entire action, not just <$fh>
|
|
sub reader {
|
|
eval $start if $b_log;
|
|
my ($file,$strip) = @_;
|
|
return if ! $file;
|
|
open( my $fh, '<', $file ) or error_handler('open', $file, $!);
|
|
chomp(my @rows = <$fh>);
|
|
if ($strip && @rows){
|
|
@rows = grep {/^\s*[^#]/} @rows;
|
|
@rows = map {s/^\s+|\s+$//g; $_} @rows if @rows;
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
# args: 1 - the file to create if not exists
|
|
sub toucher {
|
|
my $file = shift;
|
|
if ( ! -e $file ){
|
|
open( my $fh, '>', $file ) or error_handler('create', $file, $!);
|
|
}
|
|
}
|
|
|
|
# calling it trimmer to avoid conflicts with existing trim stuff
|
|
# arg: 1 - string to be right left trimmed. Also slices off \n so no chomp needed
|
|
# this thing is super fast, no need to log its times etc, 0.0001 seconds or less
|
|
sub trimmer {
|
|
#eval $start if $b_log;
|
|
my ($str) = @_;
|
|
$str =~ s/^\s+|\s+$|\n$//g;
|
|
#eval $end if $b_log;
|
|
return $str;
|
|
}
|
|
|
|
# args: 1 - hash
|
|
# send array, assign to hash, return array, uniq values only.
|
|
sub uniq {
|
|
my %seen;
|
|
grep !$seen{$_}++, @_;
|
|
}
|
|
|
|
# arg: 1 file full path to write to; 2 - arrayof data to write.
|
|
# note: turning off strict refs so we can pass it a scalar or an array reference.
|
|
sub writer {
|
|
my ($path, $ref_content) = @_;
|
|
my ($content);
|
|
no strict 'refs';
|
|
# print Dumper $ref_content, "\n";
|
|
if (ref $ref_content eq 'ARRAY'){
|
|
$content = join "\n", @$ref_content or die "failed with error $!";
|
|
}
|
|
else {
|
|
$content = scalar $ref_content;
|
|
}
|
|
open(my $fh, ">", $path) or error_handler('open',"$path", "$!");
|
|
print $fh $content;
|
|
close $fh;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### UPDATER
|
|
##### -------------------------------------------------------------------
|
|
|
|
# arg 1: type to return
|
|
sub get_defaults {
|
|
my ($type) = @_;
|
|
my %defaults = (
|
|
'ftp-upload' => 'ftp.techpatterns.com/incoming',
|
|
'inxi-branch-1' => 'https://github.com/smxi/inxi/raw/one/',
|
|
'inxi-branch-2' => 'https://github.com/smxi/inxi/raw/two/',
|
|
'inxi-dev' => 'https://smxi.org/in/',
|
|
'inxi-main' => 'https://github.com/smxi/inxi/raw/master/',
|
|
'inxi-pinxi' => 'https://github.com/smxi/inxi/raw/inxi-perl/',
|
|
'inxi-man' => "https://smxi.org/in/$self_name.1.gz",
|
|
'inxi-man-gh' => "https://github.com/smxi/inxi/raw/master/$self_name.1",
|
|
'pinxi-man' => "https://smxi.org/in/$self_name.1.gz",
|
|
'pinxi-man-gh' => "https://github.com/smxi/inxi/raw/inxi-perl/$self_name.1",
|
|
);
|
|
if ( exists $defaults{$type}){
|
|
return $defaults{$type};
|
|
}
|
|
else {
|
|
error_handler('bad-arg-int', $type);
|
|
}
|
|
}
|
|
|
|
# args: 1 - download url, not including file name; 2 - string to print out
|
|
# 3 - update type option
|
|
# note that 1 must end in / to properly construct the url path
|
|
sub update_me {
|
|
eval $start if $b_log;
|
|
my ( $self_download, $download_id ) = @_;
|
|
my $downloader_error=1;
|
|
my $file_contents='';
|
|
my $output = '';
|
|
$self_path =~ s/\/$//; # dirname sometimes ends with /, sometimes not
|
|
$self_download =~ s/\/$//; # dirname sometimes ends with /, sometimes not
|
|
my $full_self_path = "$self_path/$self_name";
|
|
|
|
if ( $b_irc ){
|
|
error_handler('not-in-irc', "-U/--update" )
|
|
}
|
|
if ( ! -w $full_self_path ){
|
|
error_handler('not-writable', "$self_name", '');
|
|
}
|
|
$output .= "Starting $self_name self updater.\n";
|
|
$output .= "Using $dl{'dl'} as downloader.\n";
|
|
$output .= "Currently running $self_name version number: $self_version\n";
|
|
$output .= "Current version patch number: $self_patch\n";
|
|
$output .= "Current version release date: $self_date\n";
|
|
$output .= "Updating $self_name in $self_path using $download_id as download source...\n";
|
|
print $output;
|
|
$output = '';
|
|
$self_download = "$self_download/$self_name";
|
|
$file_contents = download_file('stdout', $self_download);
|
|
|
|
# then do the actual download
|
|
if ( $file_contents ){
|
|
# make sure the whole file got downloaded and is in the variable
|
|
if ( $file_contents =~ /###\*\*EOF\*\*###/ ){
|
|
open(my $fh, '>', $full_self_path);
|
|
print $fh $file_contents or error_handler('write', "$full_self_path", "$!" );
|
|
close $fh;
|
|
qx( chmod +x '$self_path/$self_name' );
|
|
set_version_data();
|
|
$output .= "Successfully updated to $download_id version: $self_version\n";
|
|
$output .= "New $download_id version patch number: $self_patch\n";
|
|
$output .= "New $download_id version release date: $self_date\n";
|
|
$output .= "To run the new version, just start $self_name again.\n";
|
|
$output .= "$line3\n";
|
|
$output .= "Starting download of man page file now.\n";
|
|
print $output;
|
|
$output = '';
|
|
if ($b_man){
|
|
update_man($download_id);
|
|
}
|
|
else {
|
|
print "Skipping man download because branch version is being used.\n";
|
|
}
|
|
exit 1;
|
|
}
|
|
else {
|
|
error_handler('file-corrupt', "$self_name");
|
|
}
|
|
}
|
|
# now run the error handlers on any downloader failure
|
|
else {
|
|
error_handler('download-error', $self_download, $download_id);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub update_man {
|
|
my ($download_id) = @_;
|
|
my $man_file_location=set_man_location();
|
|
my $man_file_path="$man_file_location/$self_name.1" ;
|
|
my ($man_file_url,$output) = ('','');
|
|
|
|
my $b_downloaded = 0;
|
|
if ( ! -d $man_file_location ){
|
|
print "The required man directory was not detected on your system.\n";
|
|
print "Unable to continue: $man_file_location\n";
|
|
return 0;
|
|
}
|
|
if ( ! -w $man_file_location ){
|
|
print "Cannot write to $man_file_location! Are you root?\n";
|
|
print "Unable to continue: $man_file_location\n";
|
|
return 0;
|
|
}
|
|
if ( -f "/usr/share/man/man8/inxi.8.gz" ){
|
|
print "Updating man page location to man1.\n";
|
|
rename "/usr/share/man/man8/inxi.8.gz", "$man_file_location/inxi.1.gz";
|
|
if ( check_program('mandb') ){
|
|
system( 'mandb' );
|
|
}
|
|
}
|
|
# first choice is inxi.1/pinxi.1 from gh, second gz from smxi.org
|
|
if ( $download_id ne 'dev server' && (my $program = check_program('gzip'))){
|
|
$man_file_url=get_defaults($self_name . '-man-gh');
|
|
print "Downloading Man page file...\n";
|
|
$b_downloaded = download_file('file', $man_file_url, $man_file_path);
|
|
if ($b_downloaded){
|
|
print "Download successful. Compressing file...\n";
|
|
system("$program -9 -f $man_file_path > $man_file_path.gz");
|
|
my $err = $?;
|
|
if ($err > 0){
|
|
print "Oh no! Something went wrong compressing the manfile:\n";
|
|
print "Local path: $man_file_path Error: $err\n";
|
|
}
|
|
else {
|
|
print "Download and install of man page successful.\nCheck to make sure it works: man $self_name\n";
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$man_file_url = get_defaults($self_name . '-man');
|
|
# used to use spider tests, but only wget supports that, so no need
|
|
print "Downloading Man page file gz...\n";
|
|
$man_file_path .= '.gz';
|
|
# returns perl, 1 for true, 0 for false, even when using shell tool returns
|
|
$b_downloaded = download_file('file', $man_file_url, $man_file_path );
|
|
if ($b_downloaded) {
|
|
print "Download and install of man page successful.\nCheck to make sure it works: man $self_name\n";
|
|
}
|
|
}
|
|
if ( !$b_downloaded ){
|
|
print "Oh no! Something went wrong downloading the Man file at:\n$man_file_url\n";
|
|
print "Try -U with --dbg 1 for more information on the failure.\n";
|
|
}
|
|
}
|
|
|
|
sub set_man_location {
|
|
my $location='';
|
|
my $default_location='/usr/share/man/man1';
|
|
my $man_paths=qx(man --path 2>/dev/null);
|
|
my $man_local='/usr/local/share/man';
|
|
my $b_use_local=0;
|
|
if ( $man_paths && $man_paths =~ /$man_local/ ){
|
|
$b_use_local=1;
|
|
}
|
|
# for distro installs
|
|
if ( -f "$default_location/inxi.1.gz" ){
|
|
$location=$default_location;
|
|
}
|
|
else {
|
|
if ( $b_use_local ){
|
|
if ( ! -d "$man_local/man1" ){
|
|
mkdir "$man_local/man1";
|
|
}
|
|
$location="$man_local/man1";
|
|
}
|
|
}
|
|
if ( ! $location ){
|
|
$location=$default_location;
|
|
}
|
|
return $location;
|
|
}
|
|
|
|
# update for updater output version info
|
|
# note, this is only now used for self updater function so it can get
|
|
# the values from the UPDATED file, NOT the running program!
|
|
sub set_version_data {
|
|
open (my $fh, '<', "$self_path/$self_name");
|
|
while( my $row = <$fh>){
|
|
chomp $row;
|
|
$row =~ s/'|;//g;
|
|
if ($row =~ /^my \$self_name/ ){
|
|
$self_name = (split /=/, $row)[1];
|
|
}
|
|
elsif ($row =~ /^my \$self_version/ ){
|
|
$self_version = (split /=/, $row)[1];
|
|
}
|
|
elsif ($row =~ /^my \$self_date/ ){
|
|
$self_date = (split /=/, $row)[1];
|
|
}
|
|
elsif ($row =~ /^my \$self_patch/ ){
|
|
$self_patch = (split /=/, $row)[1];
|
|
}
|
|
elsif ($row =~ /^## END INXI INFO/){
|
|
last;
|
|
}
|
|
}
|
|
close $fh;
|
|
}
|
|
|
|
########################################################################
|
|
#### OPTIONS HANDLER / VERSION
|
|
########################################################################
|
|
|
|
sub get_options{
|
|
eval $start if $b_log;
|
|
my (@args) = @_;
|
|
$show{'short'} = 1;
|
|
my ($b_downloader,$b_help,$b_no_man,$b_no_man_force,$b_recommends,$b_updater,$b_version,
|
|
$b_use_man,$self_download, $download_id);
|
|
GetOptions (
|
|
'A|audio' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'audio'} = 1;},
|
|
'b|basic' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'battery'} = 1;
|
|
$show{'cpu-basic'} = 1;
|
|
$show{'raid-basic'} = 1;
|
|
$show{'disk-total'} = 1;
|
|
$show{'graphic'} = 1;
|
|
$show{'info'} = 1;
|
|
$show{'machine'} = 1;
|
|
$show{'network'} = 1;
|
|
$show{'system'} = 1;},
|
|
'B|battery' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'battery'} = 1;
|
|
$show{'battery-forced'} = 1; },
|
|
'c|color:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ( $arg >= 0 && $arg < get_color_scheme('count') ){
|
|
set_color_scheme($arg);
|
|
}
|
|
elsif ( $arg >= 94 && $arg <= 99 ){
|
|
$colors{'selector'} = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
} },
|
|
'C|cpu' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'cpu'} = 1; },
|
|
'd|disk-full|optical' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'disk'} = 1;
|
|
$show{'optical'} = 1; },
|
|
'D' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'disk'} = 1; },
|
|
'f|flags|flag' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'cpu'} = 1;
|
|
$show{'cpu-flag'} = 1; },
|
|
'F|full' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'audio'} = 1;
|
|
$show{'battery'} = 1;
|
|
$show{'cpu'} = 1;
|
|
$show{'disk'} = 1;
|
|
$show{'graphic'} = 1;
|
|
$show{'info'} = 1;
|
|
$show{'machine'} = 1;
|
|
$show{'network'} = 1;
|
|
$show{'network-advanced'} = 1;
|
|
$show{'partition'} = 1;
|
|
$show{'raid'} = 1;
|
|
$show{'sensor'} = 1;
|
|
$show{'system'} = 1; },
|
|
'G|graphics|graphic' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'graphic'} = 1; },
|
|
'i|ip' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'ip'} = 1;
|
|
$show{'network'} = 1;
|
|
$show{'network-advanced'} = 1;
|
|
$b_downloader = 1 if ! check_program('dig');},
|
|
'I|info' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'info'} = 1; },
|
|
'l|labels|label' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'label'} = 1;
|
|
$show{'partition'} = 1; },
|
|
'limit:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg != 0){
|
|
$limit = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
} },
|
|
'm|memory' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'ram'} = 1; },
|
|
'M|machine' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'machine'} = 1; },
|
|
'n|network-advanced' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'network'} = 1;
|
|
$show{'network-advanced'} = 1; },
|
|
'N|network' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'network'} = 1; },
|
|
'o|unmounted' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'unmounted'} = 1; },
|
|
'p|partition-full' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'partition'} = 0;
|
|
$show{'partition-full'} = 1; },
|
|
'P|partitions|partition' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'partition'} = 1; },
|
|
'r|repos|repo' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'repo'} = 1; },
|
|
'R|raid' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'raid'} = 1;
|
|
$show{'raid-forced'} = 1; },
|
|
's|sensors|sensor' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'sensor'} = 1; },
|
|
'sleep:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$arg ||= 0;
|
|
if ($arg >= 0){
|
|
$cpu_sleep = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
} },
|
|
'slots|slot' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'slot'} = 1; },
|
|
'S|system' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'system'} = 1; },
|
|
't|processes|process:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$show{'short'} = 0;
|
|
$arg ||= 'cm';
|
|
my $num = $arg;
|
|
$num =~ s/^[cm]+// if $num;
|
|
if ( $arg =~ /^([cm]+)([0-9]+)?$/ && (!$num || $num =~ /^\d+/) ){
|
|
$show{'process'} = 1;
|
|
if ($arg =~ /c/){
|
|
$show{'ps-cpu'} = 1;
|
|
}
|
|
if ($arg =~ /m/){
|
|
$show{'ps-mem'} = 1;
|
|
}
|
|
$ps_count = $num if $num;
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
} },
|
|
'usb' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'usb'} = 1; },
|
|
'u|uuid' => sub {
|
|
$show{'short'} = 0;
|
|
$show{'partition'} = 1;
|
|
$show{'uuid'} = 1; },
|
|
'v|verbosity:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$show{'short'} = 0;
|
|
if ( $arg =~ /^[0-8]$/ ){
|
|
if ($arg == 0 ){
|
|
$show{'short'} = 1;
|
|
}
|
|
if ($arg >= 1 ){
|
|
$show{'cpu-basic'} = 1;
|
|
$show{'disk-total'} = 1;
|
|
$show{'graphic'} = 1;
|
|
$show{'info'} = 1;
|
|
$show{'system'} = 1;
|
|
}
|
|
if ($arg >= 2 ){
|
|
$show{'battery'} = 1;
|
|
$show{'disk-basic'} = 1;
|
|
$show{'raid-basic'} = 1;
|
|
$show{'machine'} = 1;
|
|
$show{'network'} = 1;
|
|
}
|
|
if ($arg >= 3 ){
|
|
$show{'network-advanced'} = 1;
|
|
$show{'cpu'} = 1;
|
|
$extra = 1;
|
|
}
|
|
if ($arg >= 4 ){
|
|
$show{'disk'} = 1;
|
|
$show{'partition'} = 1;
|
|
}
|
|
if ($arg >= 5 ){
|
|
$show{'audio'} = 1;
|
|
$show{'ram'} = 1;
|
|
$show{'label'} = 1;
|
|
$show{'optical-basic'} = 1;
|
|
$show{'ram'} = 1;
|
|
$show{'raid'} = 1;
|
|
$show{'sensor'} = 1;
|
|
$show{'uuid'} = 1;
|
|
}
|
|
if ($arg >= 6 ){
|
|
$show{'optical'} = 1;
|
|
$show{'partition-full'} = 1;
|
|
$show{'unmounted'} = 1;
|
|
$show{'usb'} = 1;
|
|
$extra = 2;
|
|
}
|
|
if ($arg >= 7 ){
|
|
$b_downloader = 1 if ! check_program('dig');
|
|
$show{'cpu-flag'} = 1;
|
|
$show{'ip'} = 1;
|
|
$show{'raid-forced'} = 1;
|
|
$extra = 3;
|
|
}
|
|
if ($arg >= 8 ){
|
|
$b_downloader = 1;
|
|
$show{'slot'} = 1;
|
|
$show{'process'} = 1;
|
|
$show{'ps-cpu'} = 1;
|
|
$show{'ps-mem'} = 1;
|
|
$show{'repo'} = 1;
|
|
#$show{'weather'} = 1;
|
|
}
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
} },
|
|
'w|weather' => sub {
|
|
my ($opt) = @_;
|
|
$show{'short'} = 0;
|
|
$b_downloader = 1;
|
|
if ( $b_weather ){
|
|
$show{'weather'} = 1;
|
|
}
|
|
else {
|
|
error_handler('distro-block', $opt);
|
|
} },
|
|
'W|weather-location:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$arg ||= '';
|
|
$arg =~ s/\s//g;
|
|
$show{'short'} = 0;
|
|
$b_downloader = 1;
|
|
if ( $b_weather ){
|
|
if ($arg){
|
|
$show{'weather'} = 1;
|
|
$show{'weather-location'} = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
}
|
|
}
|
|
else {
|
|
error_handler('distro-block', $opt);
|
|
} },
|
|
'weather-unit:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$arg ||= '';
|
|
$arg =~ s/\s//g;
|
|
$arg = lc($arg) if $arg;
|
|
if ($arg && $arg =~ /^(c|f|cf|fc|i|m|im|mi)$/){
|
|
my %units = ('c'=>'m','f'=>'i','cf'=>'mi','fc'=>'im');
|
|
$arg = $units{$arg} if defined $units{$arg};
|
|
$weather_unit = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg',$opt,$arg);
|
|
} },
|
|
'x|extra:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg > 0){
|
|
$extra = $arg;
|
|
}
|
|
else {
|
|
$extra++;
|
|
} },
|
|
'y|width:i' => sub {
|
|
my ($opt, $arg) = @_;
|
|
$arg = 2000 if defined $arg && $arg == -1;
|
|
if ( $arg =~ /\d/ && $arg >= 80 ){
|
|
set_display_width($arg);
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
} },
|
|
'z|filter' => sub {
|
|
$show{'filter'} = 1; },
|
|
'Z|filter-override' => sub {
|
|
$show{'filter-override'} = 1; },
|
|
## Start non data options
|
|
'alt:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg == 40) {
|
|
$dl{'tiny'} = 0;
|
|
$b_downloader = 1;}
|
|
elsif ($arg == 41) {
|
|
$dl{'curl'} = 0;
|
|
$b_downloader = 1;}
|
|
elsif ($arg == 42) {
|
|
$dl{'fetch'} = 0;
|
|
$b_downloader = 1;}
|
|
elsif ($arg == 43) {
|
|
$dl{'wget'} = 0;
|
|
$b_downloader = 1;}
|
|
elsif ($arg == 44) {
|
|
$dl{'curl'} = 0;
|
|
$dl{'fetch'} = 0;
|
|
$dl{'wget'} = 0;
|
|
$b_downloader = 1;}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'arm' => sub {
|
|
$b_arm = 1 },
|
|
'bsd:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^(darwin|dragonfly|freebsd|openbsd|netbsd)$/i){
|
|
$bsd_type = lc($arg);
|
|
$b_fake_bsd = 1;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}
|
|
},
|
|
'bsd-data:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^(dboot|pciconf|sysctl|usbdevs)$/i){
|
|
$b_fake_dboot = 1 if $arg eq 'dboot';
|
|
$b_fake_pciconf = 1 if $arg eq 'pciconf';
|
|
$b_fake_sysctl = 1 if $arg eq 'sysctl';
|
|
$b_fake_usbdevs = 1 if $arg eq 'usbdevs';
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}
|
|
},
|
|
'dbg:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg > 0) {
|
|
$test[$arg] = 1;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'debug:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^[1-3]|1[0-2]|2[0-4]$/){
|
|
$debug=$arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
} },
|
|
'display:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^:?([0-9]+)?$/){
|
|
$display=$arg;
|
|
$display ||= ':0';
|
|
$display = ":$display" if $display !~ /^:/;
|
|
$b_display = ($b_root) ? 0 : 1;
|
|
$b_force_display = 1;
|
|
$display_opt = "-display $display";
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
} },
|
|
'dmidecode' => sub {
|
|
$b_dmidecode_force = 1 },
|
|
'downloader:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
$arg = lc($arg);
|
|
if ($arg =~ /^(curl|fetch|ftp|perl|wget)$/){
|
|
if ($arg eq 'perl' && (!check_module('HTTP::Tiny') || !check_module('IO::Socket::SSL') )){
|
|
error_handler('missing-perl-downloader', $opt, $arg);
|
|
}
|
|
elsif ( !check_program($arg)) {
|
|
error_handler('missing-downloader', $opt, $arg);
|
|
}
|
|
else {
|
|
# this dumps all the other data and resets %dl for only the
|
|
# desired downloader.
|
|
$arg = set_perl_downloader($arg);
|
|
%dl = ('dl' => $arg, $arg => 1);
|
|
$b_downloader = 1;
|
|
}
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
} },
|
|
'ftp:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
# pattern: ftp.x.x/x
|
|
if ($arg =~ /^ftp\..+\..+\/[^\/]+$/ ){
|
|
$ftp_alt = $arg;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'h|help|?' => sub {
|
|
$b_help = 1; },
|
|
'host|hostname' => sub {
|
|
$show{'host'} = 1 },
|
|
'indent-min:i' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^\d+$/){
|
|
$size{'indent-min'} = 1;
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'irc' => sub {
|
|
$b_irc = 1; },
|
|
'man' => sub {
|
|
$b_use_man = 1; },
|
|
'output:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg =~ /^(json|screen|xml)$/){
|
|
if ($arg =~ /json|screen|xml/){
|
|
$output_type = $arg;
|
|
}
|
|
else {
|
|
error_handler('option-feature-incomplete', $opt, $arg);
|
|
}
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'no-host|no-hostname' => sub {
|
|
$show{'host'} = 0 },
|
|
'no-man' => sub {
|
|
$b_no_man_force = 0; },
|
|
'no-ssl' => sub {
|
|
$dl{'no-ssl-opt'}=1 },
|
|
'output-file:s' => sub {
|
|
my ($opt,$arg) = @_;
|
|
if ($arg){
|
|
if ($arg eq 'print' || check_output_path($arg)){
|
|
$output_file = $arg;
|
|
}
|
|
else {
|
|
error_handler('output-file-bad', $opt, $arg);
|
|
}
|
|
}
|
|
else {
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}},
|
|
'recommends' => sub {
|
|
$b_recommends = 1; },
|
|
'U|update:s' => sub { # 1,2,3 OR http://myserver/path/inxi
|
|
my ($opt,$arg) = @_;
|
|
$b_downloader = 1;
|
|
if ( $b_update ){
|
|
$b_updater = 1;
|
|
if (!$arg && $self_name eq 'pinxi'){
|
|
$b_man = 1;
|
|
$download_id = 'inxi-perl branch';
|
|
$self_download = get_defaults('inxi-pinxi');
|
|
}
|
|
elsif ($arg && $arg eq '3'){
|
|
$b_man = 1;
|
|
$download_id = 'dev server';
|
|
$self_download = get_defaults('inxi-dev');
|
|
}
|
|
else {
|
|
if (!$arg){
|
|
$download_id = 'main branch';
|
|
$self_download = get_defaults('inxi-main');
|
|
$b_man = 1;
|
|
$b_use_man = 1;
|
|
}
|
|
elsif ( $arg =~ /^[12]$/){
|
|
$download_id = "branch $arg";
|
|
$self_download = get_defaults("inxi-branch-$arg");
|
|
}
|
|
elsif ( $arg =~ /^http/){
|
|
$download_id = 'alt server';
|
|
$self_download = $arg;
|
|
}
|
|
}
|
|
if (!$self_download){
|
|
error_handler('bad-arg', $opt, $arg);
|
|
}
|
|
}
|
|
else {
|
|
error_handler('distro-block', $opt);
|
|
} },
|
|
'V|version' => sub {
|
|
$b_version = 1 },
|
|
'<>' => sub {
|
|
my ($opt) = @_;
|
|
error_handler('unknown-option', "$opt", "" ); }
|
|
) ; #or error_handler('unknown-option', "@ARGV", '');
|
|
## run all these after so that we can change widths, downloaders, etc
|
|
eval $end if $b_log;
|
|
CheckRecommends::run() if $b_recommends;
|
|
set_downloader() if $b_downloader;
|
|
show_version() if $b_version;
|
|
show_options() if $b_help;
|
|
$b_man = 0 if (!$b_use_man || $b_no_man_force);
|
|
update_me( $self_download, $download_id ) if $b_updater;
|
|
if ($output_type){
|
|
if ($output_type ne 'screen' && ! $output_file){
|
|
error_handler('bad-arg', '--output', '--output-file not provided');
|
|
}
|
|
}
|
|
if ( $show{'ram'} || $show{'slot'} ||
|
|
( ( $bsd_type || $b_dmidecode_force ) && ($show{'machine'} || $show{'battery'}) ) ){
|
|
$b_dmi = 1;
|
|
}
|
|
if ($show{'audio'} || $show{'graphic'} || $show{'network'} ){
|
|
$b_pci = 1;
|
|
}
|
|
if ($show{'usb'} || $show{'audio'} || $show{'network'} ){
|
|
# to detect wan/lan, we have to use long form to get as much data as possible
|
|
$usb_level = ($show{'usb'} || $show{'network'}) ? 2 : 1;
|
|
}
|
|
if ($bsd_type && ($show{'short'} || $show{'battery'} || $show{'cpu'} || $show{'cpu-basic'} ||
|
|
$show{'info'} || $show{'machine'} || $show{'process'} || $show{'ram'} || $show{'sensor'} ) ){
|
|
$b_sysctl = 1;
|
|
}
|
|
if ($show{'filter-override'}){
|
|
$show{'filter'} = 0;
|
|
}
|
|
$b_sudo = 1 if ( $show{'unmounted'} || ($extra > 0 && $show{'disk'}) );
|
|
# override for things like -b or -v2 to -v3
|
|
$show{'cpu-basic'} = 0 if $show{'cpu'};
|
|
$show{'optical-basic'} = 0 if $show{'optical'};
|
|
$show{'partition'} = 0 if $show{'partition-full'};
|
|
if ($show{'disk'} || $show{'optical'} ){
|
|
$show{'disk-basic'} = 0;
|
|
$show{'disk-total'} = 0;
|
|
}
|
|
if ($bsd_type && ($show{'short'} || $show{'disk-basic'} || $show{'disk-total'} || $show{'disk'})){
|
|
$b_dm_boot_disk = 1;
|
|
}
|
|
if ($bsd_type && ($show{'optical-basic'} || $show{'optical'})){
|
|
$b_dm_boot_optical = 1
|
|
}
|
|
}
|
|
|
|
sub show_options {
|
|
error_handler('not-in-irc', 'help') if $b_irc;
|
|
my (@row,@rows,@data);
|
|
my $line = '';
|
|
my $color_scheme_count = get_color_scheme('count') - 1;
|
|
my $partition_string='partition';
|
|
my $partition_string_u='Partition';
|
|
my $flags = ($b_arm) ? 'features' : 'flags' ;
|
|
if ( $bsd_type ){
|
|
$partition_string='slice';
|
|
$partition_string_u='Slice';
|
|
}
|
|
# fit the line to the screen!
|
|
for my $i ( 0 .. ( ( $size{'max'} / 2 ) - 2 ) ){
|
|
$line = $line . '- ';
|
|
}
|
|
@rows = (
|
|
['0', '', '', "$self_name supports the following options. You can combine
|
|
these or list them one by one. For more detailed information, see man^$self_name.
|
|
Examples:^$self_name^-v4^-c6 OR
|
|
$self_name^-bDc^6. If you start $self_name with no arguments, it will display
|
|
a short system summary." ],
|
|
[0, '', '', '' ],
|
|
['0', '', '', "The following options, if used without -F, -b, or -v, will
|
|
show option line(s): A, B, C, D, G, I, M, N, P, R, S, W, d, f, i, l, m, n,
|
|
o, p, r, s, t, u, w, --slots, --usb - you can use these alone or together
|
|
to show just the line(s) you want to see. If you use them with -v [level],
|
|
-b or -F, $self_name will combine the outputs." ],
|
|
['0', '', '', $line ],
|
|
['0', '', '', "Output Control Options:" ],
|
|
['1', '-A', '--audio', "Audio/sound card(s), driver, sound server." ],
|
|
['1', '-b', '--basic', "Basic output, short form. Same as $self_name^-v^2." ],
|
|
['1', '-B', '--battery', "Battery info, including charge and condition, plus
|
|
extra info (if battery present)." ],
|
|
['1', '-c', '--color', "Set color scheme (0-42). Example:^$self_name^-c^11" ],
|
|
['1', '', '', "Color selectors let you set the config file value for the
|
|
selection (NOTE: IRC and global only show safe color set)" ],
|
|
['2', '94', '', "Console, out of X" ],
|
|
['2', '95', '', "Terminal, running in X - like xTerm" ],
|
|
['2', '96', '', "Gui IRC, running in X - like Xchat, Quassel, Konversation etc." ],
|
|
['2', '97', '', "Console IRC running in X - like irssi in xTerm" ],
|
|
['2', '98', '', "Console IRC not in X" ],
|
|
['2', '99', '', "Global - Overrides/removes all settings. Setting specific
|
|
removes global." ],
|
|
['1', '-C', '--cpu', "CPU output, including per CPU clock speed and max
|
|
CPU speed (if available)." ],
|
|
['1', '-d', '--disk-full, --optical', "Optical drive data (and floppy disks,
|
|
if present). Triggers -D." ],
|
|
['1', '-D', '--disk', "Hard Disk info, including total storage and details
|
|
for each disk. Disk total used percentage includes swap partition size(s)." ],
|
|
['1', '-f', '--flags', "All CPU $flags. Triggers -C. Not shown with -F to
|
|
avoid spamming." ],
|
|
['1', '-F', '--full', "Full output. Includes all Upper Case line letters
|
|
except -W, plus -s and -n. Does not show extra verbose options such
|
|
as -d -f -i -l -m -o -p -r -t -u -x, unless specified." ],
|
|
['1', '-G', '--graphics', "Graphics info (card(s), driver, display protocol
|
|
(if available), display server, resolution, renderer, OpenGL version)." ],
|
|
['1', '-i', '--ip', "WAN IP address and local interfaces (requires ifconfig
|
|
or ip network tool). Triggers -n. Not shown with -F for user security reasons.
|
|
You shouldn't paste your local/WAN IP." ],
|
|
['1', '-I', '--info', "General info, including processes, uptime, memory,
|
|
IRC client or shell type, $self_name version." ],
|
|
['1', '-l', '--label', "$partition_string_u labels. Triggers -P.
|
|
For full -p output, use -pl." ],
|
|
['1', '-m', '--memory', "Memory (RAM) data. Requires root. Numbers of
|
|
devices (slots) supported and individual memory devices (sticks of memory etc).
|
|
For devices, shows device locator, size, speed, type (e.g. DDR3).
|
|
If neither -I nor -tm are selected, also shows RAM used/total." ],
|
|
['1', '-M', '--machine', "Machine data. Device type (desktop, server, laptop,
|
|
VM etc.), motherboard, BIOS and, if present, system builder (e.g. Lenovo).
|
|
Shows UEFI/BIOS/UEFI [Legacy]. Older systems/kernels without the required /sys
|
|
data can use dmidecode instead, run as root. Dmidecode can be forced with --dmidecode" ],
|
|
['1', '-n', '--network-advanced', "Advanced Network card info. Triggers -N. Shows
|
|
interface, speed, MAC id, state, etc. " ],
|
|
['1', '-N', '--network', "Network card(s), driver." ],
|
|
['1', '-o', '--unmounted', "Unmounted $partition_string info (includes UUID
|
|
and Label if available). Shows file system type if you have lsblk installed
|
|
(Linux) or, for BSD/GNU Linux, if 'file' installed and you are root or if
|
|
you have added to /etc/sudoers (sudo v. 1.7 or newer)." ],
|
|
['1', '', '', "Example: ^<username>^ALL^=^NOPASSWD:^/usr/bin/file^" ],
|
|
['1', '-p', '--partitions-full', "Full $partition_string information (-P plus all other
|
|
detected ${partition_string}s)." ],
|
|
['1', '-P', '--partitions', "Basic $partition_string info. Shows, if detected:
|
|
/ /boot /home /opt /tmp /usr /var /var/log /var/tmp. Use -p to see all
|
|
mounted ${partition_string}s." ],
|
|
['1', '-r', '--repos', "Distro repository data. Supported repo types: APK,
|
|
APT, EOPKG, PACMAN, PACMAN-G2, PISI, PORTAGE, PORTS (BSDs), SLACKPKG,
|
|
URPMQ, YUM/ZYPP." ],
|
|
['1', '-R', '--raid', "RAID data. Shows RAID devices, states, levels,
|
|
and components. md-raid: If device is resyncing, also shows resync progress line." ],
|
|
['1', '-s', '--sensors', "Sensors output (if sensors installed/configured):
|
|
mobo/CPU/GPU temp; detected fan speeds. GPU temp only for Fglrx/Nvidia drivers.
|
|
Nvidia shows screen number for > 1 screen. IPMI sensors if present." ],
|
|
['1', '', '--slots', "PCI slots: type, speed, status. Requires root." ],
|
|
['1', '-S', '--system', "System info: host name, kernel, desktop environment
|
|
(if in X/Wayland), distro." ],
|
|
['1', '-t', '--processes', "Processes. Requires extra options: c (CPU), m
|
|
(memory), cm (CPU+memory). If followed by numbers 1-x, shows that number
|
|
of processes for each type (default: 5; if in IRC, max: 5). " ],
|
|
['1', '', '', "Make sure that there is no space between letters and
|
|
numbers (e.g. write as^-t^cm10)." ],
|
|
['1', '', '--usb', "Show USB data: Hubs and Devices." ],
|
|
['1', '-u', '--uuid', "$partition_string_u UUIDs. Triggers -P. For full -p
|
|
output, use -pu." ],
|
|
['1', '-v', '--verbosity', "Set $self_name verbosity level (0-8).
|
|
Should not be used with -b or -F. Example: $self_name^-v^4" ],
|
|
['2', '0', '', "Same as: $self_name" ],
|
|
['2', '1', '', "Basic verbose, -S + basic CPU + -G + basic Disk + -I." ],
|
|
['2', '2', '', "Networking card (-N), Machine (-M), Battery (-B; if present),
|
|
and, if present, basic RAID (devices only; notes if inactive).
|
|
Same as $self_name^-b" ],
|
|
['2', '3', '', "Advanced CPU (-C), battery (-B), network (-n);
|
|
triggers -x. " ],
|
|
['2', '4', '', "$partition_string_u size/used data (-P) for
|
|
(if present) /, /home, /var/, /boot. Shows full disk data (-D). " ],
|
|
['2', '5', '', "Audio card (-A), sensors (-s), memory/RAM (-m),
|
|
$partition_string label^(-l), UUID^(-u), short form of optical drives,
|
|
standard RAID data (-R). " ],
|
|
['2', '6', '', "Full $partition_string (-p), unmounted $partition_string (-o),
|
|
optical drive (-d), USB (--usb), full RAID; triggers -xx." ],
|
|
['2', '7', '', "Network IP data (-i); triggers -xxx."],
|
|
['2', '8', '', "Everything available, including repos (-r), processes
|
|
(-tcm), PCI slots (--slots)."],
|
|
);
|
|
push @data, @rows;
|
|
# if distro maintainers don't want the weather feature disable it
|
|
if ( $b_weather ){
|
|
@rows = (
|
|
['1', '-w', '--weather', "Local weather data/time. To check an alternate
|
|
location, see -W."],
|
|
['1', '-W', '--weather-location', "<location> Supported options for
|
|
<location>: postal code; city, state/country; latitude, longitude.
|
|
Only use if you want the weather somewhere other than the machine running
|
|
$self_name. Use only ASCII characters, replace spaces in city/state/country names with '+'.
|
|
Example:^$self_name^-W^new+york,ny"],
|
|
['1', '', '--weather-unit', "Set weather units to metric (m), imperial (i),
|
|
metric/imperial (mi), or imperial/metric (im)."],
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '-x', '-extra', "Adds the following extra data (only works with
|
|
verbose or line output, not short form):" ],
|
|
['2', '-B', '', "Vendor/model, status (if available)." ],
|
|
['2', '-C', '', "CPU $flags, Bogomips on CPU; CPU microarchitecture +
|
|
revision (if found)." ],
|
|
['2', '-d', '', "Extra optical drive features data; adds rev version to
|
|
optical drive." ],
|
|
['2', '-D', '', "HDD temp with disk data if you have hddtemp installed,
|
|
if you are root, or if you have added to /etc/sudoers (sudo v. 1.7 or newer).
|
|
Example:^<username>^ALL^=^NOPASSWD:^/usr/sbin/hddtemp" ],
|
|
['2', '-G', '', "Direct rendering status (in X); Screen number GPU is
|
|
running on (Nvidia only)." ],
|
|
['2', '-i', '', "For IPv6, show additional scope addresses: Global, Site,
|
|
Temporary, Unknown. See --limit for large counts of IP addresses." ],
|
|
['2', '-I', '', "Default system GCC. With -xx, also shows other installed
|
|
GCC versions. If running in shell, not in IRC client, shows shell version
|
|
number, if detected. Init/RC type and runlevel (if available)." ],
|
|
['2', '-m', '', "Max memory module size (if available), device type." ],
|
|
['2', '-N -A', '', "Version/port(s)/driver version (if available)." ],
|
|
['2', '-N -A -G', '', "PCI Bus ID/USB ID number of card." ],
|
|
['2', '-R', '', "md-raid: second RAID Info line with extra data:
|
|
blocks, chunk size, bitmap (if present). Resync line, shows blocks
|
|
synced/total blocks." ],
|
|
['2', '-s', '', "Basic voltages (ipmi, lm-sensors if present): 12v, 5v, 3.3v, vbat." ],
|
|
['2', '-S', '', "Desktop toolkit, if available (GNOME/Xfce/KDE only);
|
|
Kernel gcc version" ],
|
|
['2', '-t', '', "Adds memory use output to CPU (-xt c), and CPU use to
|
|
memory (-xt m)." ],
|
|
['2', '--usb', '', "For Devices, shows USB version/speed." ],
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_weather ){
|
|
@rows = (['2', '-w -W', '', "Wind speed and direction, humidity, pressure,
|
|
and (-w only) time zone." ]);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '-xx', '--extra 2', "Show extra, extra data (only works with verbose
|
|
or line output, not short form):" ],
|
|
['2', '-A', '', "Chip vendor:product ID for each audio device." ],
|
|
['2', '-B', '', "Serial number, voltage now/minimum (if available)." ],
|
|
['2', '-C', '', "Minimum CPU speed, if available." ],
|
|
['2', '-D', '', "Disk transfer speed; NVMe lanes; Disk serial number." ],
|
|
['2', '-G', '', "Chip vendor:product ID for each video card; OpenGL
|
|
compatibility version, if free drivers and available; compositor (experimental)." ],
|
|
['2', '-I', '', "Other detected installed gcc versions (if present). System
|
|
default runlevel. Adds parent program (or tty) for shell info if not in
|
|
IRC. Adds Init version number, RC (if found)." ],
|
|
['2', '-m', '', "Manufacturer, part number; single/double bank (if found)." ],
|
|
['2', '-M', '', "Chassis info, BIOS ROM size (dmidecode only), if available." ],
|
|
['2', '-N', '', "Chip vendor:product ID for each NIC." ],
|
|
['2', '-R', '', "md-raid: Superblock (if present), algorithm. If resync,
|
|
shows progress bar." ],
|
|
['2', '-s', '', "DIMM/SOC voltages (ipmi only)." ],
|
|
['2', '-S', '', "Display manager (dm) in desktop output if in X (e.g. kdm,
|
|
gdm3, lightdm)." ],
|
|
['2', '--slots', '', "Slot length." ],
|
|
['2', '--usb', '', "Vendor:chip ID." ],
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_weather ){
|
|
@rows = (['2', '-w -W', '', "Wind chill, dew point, heat index, if available." ]);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '-xxx', '--extra 3', "Show extra, extra, extra data (only works
|
|
with verbose or line output, not short form):" ],
|
|
['2', '-B', '', "Chemistry, cycles, location (if available)." ],
|
|
['2', '-D', '', "Firmware rev. if available; partition scheme, in some cases." ],
|
|
['2', '-I', '', "For 'Shell:' adds ([su|sudo|login]) to shell name if present;
|
|
for 'running in:' adds (SSH) if SSH session." ],
|
|
['2', '-m', '', "Width of memory bus, data and total (if present and greater
|
|
than data); Detail for Type, if present; module voltage, if available; serial number." ],
|
|
['2', '-R', '', "zfs-raid: portion allocated (used) by RAID devices/arrays.
|
|
md-raid: system md-raid support types (kernel support, read ahead, RAID events)." ],
|
|
['2', '-S', '', "Panel/shell info in desktop output, if in X (like gnome-shell,
|
|
cinnamon, mate-panel); (if available) dm version number, active window manager." ]
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_weather ){
|
|
@rows = (['2', '-w -W', '', "Location (uses -z/irc filter), weather observation
|
|
time, altitude (shows extra lines for data where relevant)." ] );
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '-y', '--width', "Output line width max (integer >= 80). Overrides IRC/Terminal
|
|
settings or actual widths. Example:^inxi^-y^130" ],
|
|
['1', '-z', '--filter', "Adds security filters for IP/MAC addresses, serial numbers,
|
|
location (-w), user home directory name. Default on for IRC clients." ],
|
|
['1', '-Z', '--filter-override', "Absolute override for output filters. Useful for
|
|
debugging networking issues in IRC, for example." ],
|
|
[0, '', '', "$line" ],
|
|
[0, '', '', "Additional Options:" ],
|
|
['1', '-h', '--help', "This help menu." ],
|
|
['1', '', '--recommends', "Checks $self_name application dependencies + recommends,
|
|
and directories, then shows what package(s) you need to install to add support
|
|
for that feature." ]
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_update ){
|
|
@rows = (
|
|
['1', '-U', '--update', "Auto-update $self_name. Will also install/update man
|
|
page. Note: if you installed as root, you must be root to update, otherwise
|
|
user is fine. Man page installs require root. No arguments downloads from
|
|
main $self_name git repo." ],
|
|
['1', '', '', "Use alternate sources for updating $self_name" ],
|
|
['2', '1', '', "Get the git branch one version." ],
|
|
['2', '2', '', "Get the git branch two version." ],
|
|
['3', '3', '', "Get the dev server (smxi.org) version." ],
|
|
['2', '<http>', '', "Get a version of $self_name from your own server;
|
|
use the full download path, e.g.^$self_name^-U^https://myserver.com/inxi" ]
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '-V', '--version', "Prints $self_name version info then exits." ],
|
|
[0, '', '', "$line" ],
|
|
[0, '', '', "Debugging Options:" ],
|
|
['1', '', '--debug', "Triggers debugging modes." ],
|
|
['2', '1-3', '', "On screen debugger output." ],
|
|
['2', '10', '', "Basic logging." ],
|
|
['2', '11', '', "Full file/system info logging." ],
|
|
['1', '', ,'', "The following create a tar.gz file of system data, plus $self_name
|
|
output. To automatically upload debugger data tar.gz file
|
|
to ftp.techpatterns.com: $self_name^--debug^21" ],
|
|
['2', '20', '', "Full system data collection: /sys; xorg conf and log data, xrandr,
|
|
xprop, xdpyinfo, glxinfo etc.; data from dev, disks,
|
|
${partition_string}s, etc." ],
|
|
['2', '21', '', "Upload debugger dataset to $self_name debugger server
|
|
automatically, removes debugger data directory, leaves tar.gz debugger file." ],
|
|
['2', '22', '', "Upload debugger dataset to $self_name debugger server
|
|
automatically, removes debugger data directory and debugger tar.gz file." ],
|
|
['1', '', '--ftp', "Use with --debugger 21 to trigger an alternate FTP server for upload.
|
|
Format:^[ftp.xx.xx/yy]. Must include a remote directory to upload to.
|
|
Example:^$self_name^--debug^21^--ftp^ftp.myserver.com/incoming" ],
|
|
[0, '', '', "$line" ],
|
|
[0, '', '', "Advanced Options:" ],
|
|
[1, '', '--alt', "Trigger for various advanced options:" ],
|
|
['2', '40', '', "Bypass Perl as a downloader option." ],
|
|
['2', '41', '', "Bypass Curl as a downloader option." ],
|
|
['2', '42', '', "Bypass Fetch as a downloader option." ],
|
|
['2', '43', '', "Bypass Wget as a downloader option." ],
|
|
['2', '44', '', "Bypass Curl, Fetch, and Wget as downloader options. Forces
|
|
Perl if HTTP::Tiny present." ],
|
|
['1', '', '--display', "[:[0-9]] Try to get display data out of X (default: display 0)." ],
|
|
['1', '', '--dmidecode', "Force use of dmidecode data instead of /sys where relevant
|
|
(e.g. -M, -B)." ],
|
|
['1', '', '--downloader', "Force $self_name to use [curl|fetch|perl|wget] for downloads." ],
|
|
['1', '', '--host', "Turn on hostname for -S." ],
|
|
['1', '', '--indent-min', "Set point where $self_name autowraps line starters." ],
|
|
['1', '', '--limit', "[-1; 1-x] Set max output limit of IP addresses for -i
|
|
(default 10; -1 removes limit)." ],
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_update ){
|
|
@rows = (
|
|
['1', '', '--man', "Install correct man version for dev branch (-U 3) or pinxi using -U." ],
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '', '--no-host', "Turn off hostname for -S. Useful if showing output from servers etc." ],
|
|
);
|
|
push @data, @rows;
|
|
if ( $b_update ){
|
|
@rows = (
|
|
['1', '', '--no-man', "Disable man install for all -U update actions." ],
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
@rows = (
|
|
['1', '', '--no-ssl', "Skip SSL certificate checks for all downloader actions
|
|
(Wget/Fetch/Curl only)." ],
|
|
['1', '', '--output', "[json|screen|xml] Change data output type. Requires --output-file
|
|
if not screen." ],
|
|
['1', '', '--output-file', "[Full filepath|print] Output file to be used for --output." ],
|
|
['1', '', '--sleep', "[0-x.x] Change CPU sleep time, in seconds, for -C
|
|
(default:^$cpu_sleep). Allows system to catch up and show a more accurate CPU
|
|
use. Example:^$self_name^-Cxxx^--sleep^0.15" ],
|
|
['0', '', '', $line ],
|
|
);
|
|
push @data, @rows;
|
|
print_basic(@data);
|
|
exit 1;
|
|
}
|
|
|
|
sub show_version {
|
|
require Cwd;
|
|
import Cwd;
|
|
# if not in PATH could be either . or directory name, no slash starting
|
|
my $working_path=$self_path;
|
|
my (@data, @row, @rows, $link, $self_string);
|
|
if ( $working_path eq '.' ){
|
|
$working_path = getcwd();
|
|
}
|
|
elsif ( $working_path !~ /^\// ){
|
|
$working_path = getcwd() . "/$working_path";
|
|
}
|
|
# handle if it's a symbolic link, rare, but can happen with directories
|
|
# in irc clients which would only matter if user starts inxi with -! 30 override
|
|
# in irc client
|
|
if ( -l "$working_path/$self_name" ){
|
|
$link="$working_path/$self_name";
|
|
$working_path = readlink "$working_path/$self_name";
|
|
$working_path =~ s/[^\/]+$//;
|
|
}
|
|
# strange output /./ ending, but just trim it off, I don't know how it happens
|
|
$working_path =~ s%/\./%/%;
|
|
@row = ([ 0, '', '', "$self_name $self_version-$self_patch ($self_date)"],);
|
|
push @data, @row;
|
|
if ( ! $b_irc ){
|
|
@row = ([ 0, '', '', ""],);
|
|
push @data, @row;
|
|
my $year = (split/-/, $self_date)[0];
|
|
@row = [ 0, '', '', "Program Location: $working_path" ];
|
|
push @data, @row;
|
|
if ( $link ){
|
|
@row = [ 0, '', '', "Started via symbolic link: $link" ];
|
|
push @data, @row;
|
|
}
|
|
@rows = (
|
|
[ 0, '', '', "Website:^https://github.com/smxi/inxi^or^https://smxi.org/" ],
|
|
[ 0, '', '', "IRC:^irc.oftc.net channel:^#smxi" ],
|
|
[ 0, '', '', "Forums:^https://techpatterns.com/forums/forum-33.html" ],
|
|
[ 0, '', '', " " ],
|
|
[ 0, '', '', "$self_name - the universal, portable, system information tool
|
|
for console and irc." ],
|
|
[ 0, '', '', "Using Perl version: $]"],
|
|
[ 0, '', '', " " ],
|
|
[ 0, '', '', "This program started life as a fork of Infobash 3.02:
|
|
Copyright^(C)^2005-2007^Michiel^de^Boer^aka^locsmif." ],
|
|
[ 0, '', '', "Subsequent changes and modifications (after Infobash 3.02):
|
|
Copyright^(C)^2008-$year^Harald^Hope^aka^h2.
|
|
CPU/Konversation^fixes:^Scott^Rogers^aka^trash80.
|
|
USB^audio^fixes:^Steven^Barrett^aka^damentz." ],
|
|
[ 0, '', '', '' ],
|
|
[ 0, '', '', "This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by the Free Software
|
|
Foundation; either version 3 of the License, or (at your option) any later version.
|
|
(https://www.gnu.org/licenses/gpl.html)" ]
|
|
);
|
|
push @data, @rows;
|
|
}
|
|
print_basic(@data);
|
|
exit 1;
|
|
}
|
|
|
|
########################################################################
|
|
#### STARTUP DATA
|
|
########################################################################
|
|
|
|
# StartClient
|
|
{
|
|
package StartClient;
|
|
|
|
# use warnings;
|
|
# use strict;
|
|
|
|
my $ppid = '';
|
|
my $pppid = '';
|
|
|
|
# NOTE: there's no reason to crete an object, we can just access
|
|
# the features statically.
|
|
# args: none
|
|
# sub new {
|
|
# my $class = shift;
|
|
# my $self = {};
|
|
# # print "$f\n";
|
|
# # print "$type\n";
|
|
# return bless $self, $class;
|
|
# }
|
|
|
|
sub get_client_data {
|
|
eval $start if $b_log;
|
|
$ppid = getppid();
|
|
main::set_ps_aux() if ! @ps_aux;
|
|
if (!$b_irc){
|
|
main::get_shell_data($ppid);
|
|
}
|
|
else {
|
|
$show{'filter'} = 1;
|
|
get_client_name();
|
|
if ($client{'konvi'} == 1 || $client{'konvi'} == 3){
|
|
set_konvi_data();
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub get_client_name {
|
|
eval $start if $b_log;
|
|
my $client_name = '';
|
|
|
|
# print "$ppid\n";
|
|
if ($ppid && -e "/proc/$ppid/exe" ){
|
|
$client_name = lc(readlink "/proc/$ppid/exe");
|
|
$client_name =~ s/^.*\///;
|
|
if ($client_name =~ /^bash|dash|sh|python.*|perl.*$/){
|
|
$pppid = (main::grabber("ps -p $ppid -o ppid"))[1];
|
|
#my @temp = (main::grabber("ps -p $ppid -o ppid 2>/dev/null"))[1];
|
|
$pppid =~ s/^\s+|\s+$//g;
|
|
$client_name =~ s/[0-9\.]+$//; # clean things like python2.7
|
|
if ($pppid && -f "/proc/$pppid/exe" ){
|
|
$client_name = lc(readlink "/proc/$pppid/exe");
|
|
$client_name =~ s/^.*\///;
|
|
$client{'native'} = 0;
|
|
}
|
|
}
|
|
$client{'name'} = $client_name;
|
|
get_client_version();
|
|
# print "c:$client_name p:$pppid\n";
|
|
}
|
|
else {
|
|
if (! check_modern_konvi() ){
|
|
$ppid = getppid();
|
|
$client_name = (main::grabber("ps -p $ppid"))[1];
|
|
if ($client_name){
|
|
my @data = split /\s+/, $client_name if $client_name;
|
|
if ($bsd_type){
|
|
$client_name = lc($data[5]);
|
|
}
|
|
# gnu/linux uses last value
|
|
else {
|
|
$client_name = lc($data[-1]);
|
|
}
|
|
$client_name =~ s/.*\|-(|)//;
|
|
$client_name =~ s/[0-9\.]+$//; # clean things like python2.7
|
|
$client{'name'} = $client_name;
|
|
$client{'native'} = 1;
|
|
get_client_version();
|
|
}
|
|
else {
|
|
$client{'name'} = "PPID='$ppid' - Empty?";
|
|
}
|
|
}
|
|
}
|
|
if ($b_log){
|
|
my $string = "Client: $client{'name'} :: version: $client{'version'} :: konvi: $client{'konvi'} :: PPID: $ppid";
|
|
main::log_data('data', $string);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_client_version {
|
|
eval $start if $b_log;
|
|
@app = main::program_values($client{'name'});
|
|
my (@data,@working,$string);
|
|
if (@app){
|
|
$string = ($client{'name'} =~ /^gribble|limnoria|supybot$/) ? 'supybot' : $client{'name'};
|
|
$client{'version'} = main::program_version($string,$app[0],$app[1],$app[2],$app[4],$app[5],$app[6]);
|
|
$client{'name-print'} = $app[3];
|
|
$client{'console-irc'} = $app[4];
|
|
}
|
|
if ($client{'name'} =~ /^bash|dash|sh$/ ){
|
|
$client{'name-print'} = 'shell wrapper';
|
|
$client{'console-irc'} = 1;
|
|
}
|
|
elsif ($client{'name'} eq 'bitchx') {
|
|
@data = main::grabber("$client{'name'} -v");
|
|
$string = awk(\@data,'Version');
|
|
if ($string){
|
|
$string =~ s/[()]|bitchx-//g;
|
|
@data = split /\s+/, $string;
|
|
$_=lc for @data;
|
|
$client{'version'} = ($data[1] eq 'version') ? $data[2] : $data[1];
|
|
}
|
|
}
|
|
# 'hexchat' => ['',0,'','HexChat',0,0], # special
|
|
# the hexchat author decided to make --version/-v return a gtk dialogue box, lol...
|
|
# so we need to read the actual config file for hexchat. Note that older hexchats
|
|
# used xchat config file, so test first for default, then legacy. Because it's possible
|
|
# for this file to be user edited, doing some extra checks here.
|
|
elsif ($client{'name'} eq 'hexchat') {
|
|
if ( -f '~/.config/hexchat/hexchat.conf' ){
|
|
@data = main::reader('~/.config/hexchat/hexchat.conf','strip');
|
|
}
|
|
elsif ( -f '~/.config/hexchat/xchat.conf' ){
|
|
@data = main::reader('~/.config/hexchat/xchat.conf','strip');
|
|
}
|
|
$client{'version'} = main::awk(\@data,'version',2,'\s*=\s*');
|
|
$client{'name-print'} = 'HexChat';
|
|
}
|
|
# note: see legacy inxi konvi logic if we need to restore any of the legacy code.
|
|
elsif ($client{'name'} eq 'konversation') {
|
|
$client{'konvi'} = ( ! $client{'native'} ) ? 2 : 1;
|
|
}
|
|
elsif ($client{'name'} =~ /quassel/) {
|
|
@data = main::grabber("$client{'name'} -v 2>/dev/null");
|
|
foreach (@data){
|
|
if ($_ =~ /^Quassel IRC:/){
|
|
$client{'version'} = (split /\s+/, $_ )[2];
|
|
last;
|
|
}
|
|
elsif ($_ =~ /quassel\s[v]?[0-9]/){
|
|
$client{'version'} = (split /\s+/, $_ )[1];
|
|
last;
|
|
}
|
|
}
|
|
$client{'version'} ||= '(pre v0.4.1)?';
|
|
}
|
|
# then do some perl type searches, do this last since it's a wildcard search
|
|
elsif ($client{'name'} =~ /^perl.*|ksirc|dsirc$/ ) {
|
|
my @cmdline = main::get_cmdline();
|
|
# Dynamic runpath detection is too complex with KSirc, because KSirc is started from
|
|
# kdeinit. /proc/<pid of the grandparent of this process>/exe is a link to /usr/bin/kdeinit
|
|
# with one parameter which contains parameters separated by spaces(??), first param being KSirc.
|
|
# Then, KSirc runs dsirc as the perl irc script and wraps around it. When /exec is executed,
|
|
# dsirc is the program that runs inxi, therefore that is the parent process that we see.
|
|
# You can imagine how hosed I am if I try to make inxi find out dynamically with which path
|
|
# KSirc was run by browsing up the process tree in /proc. That alone is straightjacket material.
|
|
# (KSirc sucks anyway ;)
|
|
foreach (@cmdline){
|
|
if ( $_ =~ /dsirc/ ){
|
|
$client{'version'} = main::program_version('ksirc','KSirc:',2,'-v',0,0);
|
|
$client{'name'} = 'ksirc';
|
|
$client{'name-print'} = 'KSirc';
|
|
}
|
|
}
|
|
$client{'console-irc'} = 1;
|
|
perl_python_client();
|
|
}
|
|
elsif ($client{'name'} =~ /python/) {
|
|
perl_python_client();
|
|
}
|
|
if (!$client{'name-print'}) {
|
|
$client{'name-print'} = 'Unknown Client: ' . $client{'name'};
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_cmdline {
|
|
eval $start if $b_log;
|
|
my @cmdline;
|
|
my $i = 0;
|
|
$ppid = getppid();
|
|
if (! -e "/proc/$ppid/cmdline" ){
|
|
return 1;
|
|
}
|
|
local $\ = '';
|
|
open( my $fh, '<', "/proc/$ppid/cmdline" ) or
|
|
print_line("Open /proc/$ppid/cmdline failed: $!");
|
|
my @rows = <$fh>;
|
|
close $fh;
|
|
|
|
foreach (@rows){
|
|
push @cmdline, $_;
|
|
$i++;
|
|
last if $i > 31;
|
|
}
|
|
if ( $i == 0 ){
|
|
$cmdline[0] = $rows[0];
|
|
$i = ($cmdline[0]) ? 1 : 0;
|
|
}
|
|
main::log_data('string',"cmdline: @cmdline count: $i") if $b_log;
|
|
eval $end if $b_log;
|
|
return @cmdline;
|
|
}
|
|
sub perl_python_client {
|
|
eval $start if $b_log;
|
|
return 1 if $client{'version'};
|
|
# this is a hack to try to show konversation if inxi is running but started via /cmd
|
|
# OR via program shortcuts, both cases in fact now
|
|
# main::print_line("konvi: " . scalar grep { $_ =~ /konversation/ } @ps_cmd);
|
|
if ( $b_display && main::check_program('konversation') && ( grep { $_ =~ /konversation/ } @ps_cmd )){
|
|
@app = main::program_values('konversation');
|
|
$client{'version'} = main::program_version('konversation',$app[0],$app[1],$app[2],$app[5],$app[6]);
|
|
$client{'name'} = 'konversation';
|
|
$client{'name-print'} = $app[3];
|
|
$client{'console-irc'} = $app[4];
|
|
}
|
|
## NOTE: supybot only appears in ps aux using 'SHELL' command; the 'CALL' command
|
|
## gives the user system irc priority, and you don't see supybot listed, so use SHELL
|
|
elsif ( !$b_display &&
|
|
(main::check_program('supybot') || main::check_program('gribble') || main::check_program('limnoria')) &&
|
|
( grep { $_ =~ /supybot/ } @ps_cmd ) ){
|
|
@app = main::program_values('supybot');
|
|
$client{'version'} = main::program_version('supybot',$app[0],$app[1],$app[2],$app[5],$app[6]);
|
|
if ($client{'version'}){
|
|
if ( grep { $_ =~ /gribble/ } @ps_cmd ){
|
|
$client{'name'} = 'gribble';
|
|
$client{'name-print'} = 'Gribble';
|
|
}
|
|
if ( grep { $_ =~ /limnoria/ } @ps_cmd){
|
|
$client{'name'} = 'limnoria';
|
|
$client{'name-print'} = 'Limnoria';
|
|
}
|
|
else {
|
|
$client{'name'} = 'supybot';
|
|
$client{'name-print'} = 'Supybot';
|
|
}
|
|
}
|
|
else {
|
|
$client{'name'} = 'supybot';
|
|
$client{'name-print'} = 'Supybot';
|
|
}
|
|
$client{'console-irc'} = 1;
|
|
}
|
|
else {
|
|
$client{'name-print'} = "Unknown $client{'name'} client";
|
|
}
|
|
if ($b_log){
|
|
my $string = "namep: $client{'name-print'} name: $client{'name'} version: $client{'version'}";
|
|
main::log_data('data',$string);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
## try to infer the use of Konversation >= 1.2, which shows $PPID improperly
|
|
## no known method of finding Konvi >= 1.2 as parent process, so we look to see if it is running,
|
|
## and all other irc clients are not running. As of 2014-03-25 this isn't used in my cases
|
|
sub check_modern_konvi {
|
|
eval $start if $b_log;
|
|
|
|
return 0 if ! $client{'qdbus'};
|
|
my $b_modern_konvi = 0;
|
|
my $konvi_version = '';
|
|
my $konvi = '';
|
|
my $pid = '';
|
|
my (@temp);
|
|
# main::log_data('data',"name: $client{'name'} :: qdb: $client{'qdbus'} :: version: $client{'version'} :: konvi: $client{'konvi'} :: PPID: $ppid") if $b_log;
|
|
# sabayon uses /usr/share/apps/konversation as path
|
|
if ( -d '/usr/share/kde4/apps/konversation' || -d '/usr/share/apps/konversation' ){
|
|
$pid = main::awk(\@ps_aux,'konversation',2,'\s+');
|
|
main::log_data('data',"pid: $pid") if $b_log;
|
|
$konvi = readlink ("/proc/$pid/exe");
|
|
$konvi =~ s/^.*\///; # basename
|
|
@app = main::program_values('konversation');
|
|
if ($konvi){
|
|
@app = main::program_values('konversation');
|
|
$konvi_version = main::program_version($konvi,$app[0],$app[1],$app[2],$app[5],$app[6]);
|
|
@temp = split /\./, $konvi_version;
|
|
$client{'console-irc'} = $app[4];
|
|
$client{'konvi'} = 3;
|
|
$client{'name'} = 'konversation';
|
|
$client{'name-print'} = $app[3];
|
|
$client{'version'} = $konvi_version;
|
|
# note: we need to change this back to a single dot number, like 1.3, not 1.3.2
|
|
$konvi_version = $temp[0] . "." . $temp[1];
|
|
if ($konvi_version > 1.1){
|
|
$b_modern_konvi = 1;
|
|
}
|
|
}
|
|
}
|
|
main::log_data('data',"name: $client{'name'} name print: $client{'name-print'}
|
|
qdb: $client{'qdbus'} version: $konvi_version konvi: $konvi PID: $pid") if $b_log;
|
|
main::log_data('data',"b_is_qt4: $b_modern_konvi") if $b_log;
|
|
## for testing this module
|
|
# my $ppid = getppid();
|
|
# system('qdbus org.kde.konversation', '/irc', 'say', $client{'dserver'}, $client{'dtarget'},
|
|
# "getpid_dir: $konvi_qt4 verNum: $konvi_version pid: $pid ppid: $ppid" );
|
|
eval $end if $b_log;
|
|
return $b_modern_konvi;
|
|
}
|
|
|
|
sub set_konvi_data {
|
|
eval $start if $b_log;
|
|
my $config_tool = '';
|
|
# https://userbase.kde.org/Konversation/Scripts/Scripting_guide
|
|
if ( $client{'konvi'} == 3 ){
|
|
$client{'dserver'} = shift @ARGV;
|
|
$client{'dtarget'} = shift @ARGV;
|
|
$client{'dobject'} = 'default';
|
|
}
|
|
elsif ( $client{'konvi'} == 1 ){
|
|
$client{'dport'} = shift @ARGV;
|
|
$client{'dserver'} = shift @ARGV;
|
|
$client{'dtarget'} = shift @ARGV;
|
|
$client{'dobject'} = 'Konversation';
|
|
}
|
|
# for some reason this logic hiccups on multiple spaces between args
|
|
@ARGV = grep { $_ ne '' } @ARGV;
|
|
# there's no current kde 5 konvi config tool that we're aware of. Correct if changes.
|
|
if ( main::check_program('kde4-config') ){
|
|
$config_tool = 'kde4-config';
|
|
}
|
|
elsif ( main::check_program('kde5-config') ){
|
|
$config_tool = 'kde5-config';
|
|
}
|
|
elsif ( main::check_program('kde-config') ){
|
|
$config_tool = 'kde-config';
|
|
}
|
|
# The section below is on request of Argonel from the Konversation developer team:
|
|
# it sources config files like $HOME/.kde/share/apps/konversation/scripts/inxi.conf
|
|
if ($config_tool){
|
|
my @data = main::grabber("$config_tool --path data 2>/dev/null",':');
|
|
main::get_configs(@data);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
}
|
|
|
|
########################################################################
|
|
#### OUTPUT
|
|
########################################################################
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### FILTERS AND TOOLS
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub apply_filter {
|
|
my ($string) = @_;
|
|
if ($string){
|
|
$string = ( $show{'filter'} ) ? $filter_string : $string;
|
|
}
|
|
else {
|
|
$string = 'N/A';
|
|
}
|
|
return $string;
|
|
}
|
|
|
|
sub clean_characters {
|
|
my ($data) = @_;
|
|
# newline, pipe, brackets, + sign, with space, then clear doubled
|
|
# spaces and then strip out trailing/leading spaces.
|
|
$data =~ s/\n|\|\+|\[\s\]|\s\s+/ /g if $data;
|
|
$data =~ s/^\s+|\s+$//g if $data;
|
|
return $data;
|
|
}
|
|
|
|
sub cleaner {
|
|
my ($item) = @_;
|
|
return $item if !$item;# handle cases where it was 0 or ''
|
|
# note: |nee trips engineering, but I don't know why nee was filtered
|
|
$item =~ s/chipset|company|components|computing|computer|corporation|communications|electronics|electrical|electric|gmbh|group|incorporation|industrial|international|\bnee\b|revision|semiconductor|software|technologies|technology|ltd\.|<ltd>|\bltd\b|inc\.|<inc>|\binc\b|intl\.|co\.|<co>|corp\.|<corp>|\(tm\)|\(r\)|®|\(rev ..\)|\'|\"|\sinc\s*$|\?//gi;
|
|
$item =~ s/,|\*/ /g;
|
|
$item =~ s/\s\s+/ /g;
|
|
$item =~ s/^\s+|\s+$//g;
|
|
return $item;
|
|
}
|
|
|
|
sub disk_cleaner {
|
|
my ($item) = @_;
|
|
return $item if !$item;
|
|
# <?unknown>?|
|
|
$item =~ s/vendor.*|product.*|O\.?E\.?M\.?//gi;
|
|
$item =~ s/\s\s+/ /g;
|
|
$item =~ s/^\s+|\s+$//g;
|
|
return $item;
|
|
}
|
|
|
|
sub dmi_cleaner {
|
|
my ($string) = @_;
|
|
my $cleaner = '^Base Board .*|^Chassis .*|empty|Undefined.*|.*O\.E\.M\..*|.*OEM.*|^Not .*';
|
|
$cleaner .= '|^System .*|.*unknow.*|.*N\/A.*|none|^To be filled.*|^0x[0]+$';
|
|
$cleaner .= '|\[Empty\]|<Bad Index>|Default string|^\.\.$|Manufacturer.*';
|
|
$cleaner .= '|AssetTagNum|Manufacturer| Or Motherboard|PartNum.*|SerNum';
|
|
$string =~ s/$cleaner//i;
|
|
$string =~ s/^\s+|\bbios\b|\bacpi\b|\s+$//gi;
|
|
$string =~ s/http:\/\/www.abit.com.tw\//Abit/i;
|
|
$string =~ s/\s\s+/ /g;
|
|
$string =~ s/^\s+|\s+$//g;
|
|
$string = remove_duplicates($string) if $string;
|
|
return $string;
|
|
}
|
|
|
|
sub remove_duplicates {
|
|
my ($string) = @_;
|
|
return if ! $string;
|
|
my $holder = '';
|
|
my (@temp);
|
|
my @data = split /\s+/, $string;
|
|
foreach (@data){
|
|
if ($holder ne $_){
|
|
push @temp, $_;
|
|
}
|
|
$holder = $_;
|
|
}
|
|
$string = join ' ', @temp;
|
|
return $string;
|
|
}
|
|
|
|
# args: $1 - size in KB, return KB, MB, GB, TB, PB, EB
|
|
sub get_size {
|
|
my ($size,$b_int) = @_;
|
|
my (@data);
|
|
return ('','') if ! defined $size;
|
|
if ($size !~ /^[0-9\.]+$/){
|
|
$data[0] = $size;
|
|
$data[1] = '';
|
|
}
|
|
elsif ($size > 1024**5){
|
|
$data[0] = sprintf("%.2f",$size/1024**5);
|
|
$data[1] = 'EiB';
|
|
}
|
|
elsif ($size > 1024**4){
|
|
$data[0] = sprintf("%.2f",$size/1024**4);
|
|
$data[1] = 'PiB';
|
|
}
|
|
elsif ($size > 1024**3){
|
|
$data[0] = sprintf("%.2f",$size/1024**3);
|
|
$data[1] = 'TiB';
|
|
}
|
|
elsif ($size > 1024**2){
|
|
$data[0] = sprintf("%.2f",$size/1024**2);
|
|
$data[1] = 'GiB';
|
|
}
|
|
elsif ($size > 1024){
|
|
$data[0] = sprintf("%.1f",$size/1024);
|
|
$data[1] = 'MiB';
|
|
}
|
|
else {
|
|
$data[0] = sprintf("%.0f",$size);
|
|
$data[1] = 'KiB';
|
|
}
|
|
$data[0] = int($data[0]) if $b_int && $data[0];
|
|
return @data;
|
|
}
|
|
|
|
# not used, but keeping logic for now
|
|
sub increment_starters {
|
|
my ($key,$indexes) = @_;
|
|
my $result = $key;
|
|
if (defined $$indexes{$key} ){
|
|
$$indexes{$key}++;
|
|
$result = "$key-$$indexes{$key}";
|
|
}
|
|
return $result;
|
|
}
|
|
|
|
sub memory_data_full {
|
|
eval $start if $b_log;
|
|
my ($source) = @_;
|
|
my $num = 0;
|
|
my ($memory,@rows);
|
|
my ($percent,$total,$used) = ('','','');
|
|
if (!$show{'info'}){
|
|
$memory = get_memory_data('splits');
|
|
if ($memory){
|
|
my @temp = split /:/, $memory;
|
|
my @temp2 = get_size($temp[0]);
|
|
$total = ($temp2[1]) ? $temp2[0] . ' ' . $temp2[1] : $temp2[0];
|
|
@temp2 = get_size($temp[1]);
|
|
$used = ($temp2[1]) ? $temp2[0] . ' ' . $temp2[1] : $temp2[0];
|
|
$used .= " ($temp[2]%)" if $temp[2];
|
|
}
|
|
my $key = ($source eq 'process') ? 'System RAM': 'RAM';
|
|
$rows[0]{main::key($num++,$key)} = '';
|
|
$rows[0]{main::key($num++,'total')} = $total;
|
|
$rows[0]{main::key($num++,'used')} = $used;
|
|
}
|
|
$b_mem = 1;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub pci_cleaner {
|
|
my ($string,$type) = @_;
|
|
#print "st1 $type:$string\n";
|
|
my $filter = 'compatible\scontroller|\b(device|controller|multimedia)\b|\([^)]+\)';
|
|
# \[[^\]]+\]$| not trimming off ending [...] initial type filters removes end
|
|
$filter = '\[[^\]]+\]$|' . $filter if $type eq 'pci';
|
|
$string =~ s/$filter//ig;
|
|
$string =~ s/\s\s+/ /g;
|
|
$string =~ s/^\s+|\s+$//g;
|
|
#print "st2 $type:$string\n";
|
|
$string = remove_duplicates($string) if $string;
|
|
return $string;
|
|
}
|
|
|
|
sub pci_long_filter {
|
|
my ($string) = @_;
|
|
if ($string =~ /\[AMD(\/ATI)?\]/){
|
|
$string =~ s/Advanced\sMicro\sDevices\s\[AMD(\/ATI)?\]/AMD/;
|
|
}
|
|
return $string;
|
|
}
|
|
|
|
sub row_defaults {
|
|
my ($type,$id) = @_;
|
|
$id ||= '';
|
|
my %unfound = (
|
|
'arm-cpu-f' => 'Use -f option to see features',
|
|
'arm-pci' => "PCI data type is not supported on ARM systems.",
|
|
'battery-data' => "No battery data found. Is one present?",
|
|
'battery-data-sys' => "No /sys data found. Old system?",
|
|
'cpu-model-null' => "Model N/A",
|
|
'darwin-feature' => "Feature not supported iu Darwin/OSX.",
|
|
'disk-data-bsd' => "No disk data found for this BSD system.",
|
|
'disk-data' => "No Disk data was found.",
|
|
'disk-size-0' => "Total N/A",
|
|
'display-console' => 'No advanced graphics data found on this system in console.',
|
|
'display-null' => 'No advanced graphics data found on this system.',
|
|
'display-root' => 'Advanced graphics data unavailable in console for root.',
|
|
'display-root-x' => 'Advanced graphics data unavailable for root. Old System?',
|
|
'display-server' => "No display server data found. Headless server?",
|
|
'glxinfo-missing' => "Unable to show advanced data. Required tool glxinfo missing.",
|
|
'display-try' => 'Advanced graphics data unavailable in console. Try -G --display',
|
|
'dev' => 'Feature under development',
|
|
'dmesg-boot-permissions' => 'dmesg.boot permissions',
|
|
'dmesg-boot-missing' => 'dmesg.boot not found',
|
|
'IP' => "No $id data found. Connected to the web? SSL issues?",
|
|
'machine-data' => "No machine data: try newer kernel.",
|
|
'machine-data-bsd' => "No machine data: Is dmidecode installed? Try -M --dmidecode.",
|
|
'machine-data-dmidecode' => "No machine data: try newer kernel. Is dmidecode installed? Try -M --dmidecode.",
|
|
'machine-data-force-dmidecode' => "No machine data: try newer kernel. Is dmidecode installed? Try -M --dmidecode.",
|
|
'optical-data' => "No Optical or Floppy data was found.",
|
|
'optical-data-bsd' => "No floppy or optical data found for this BSD system.",
|
|
'output-limit' => "Output throttled. IPs: $id; Limit: $limit; Override: --limit [1-x;-1 all]",
|
|
'partition-data' => "No Partition data was found.",
|
|
'pci-advanced-data' => 'bus/chip ids unavailable',
|
|
'pci-card-data' => "No PCI card data found.",
|
|
'pci-slot-data' => "No PCI slot data found. SOC?",
|
|
'raid-data' => "No RAID data was found.",
|
|
'ram-data' => "No RAM data was found. SOC?",
|
|
'root-required' => "<root required>",
|
|
'sensors-data-ipmi' => "No ipmi sensors data was found.",
|
|
'sensors-data-linux' => "No sensors data was found. Is sensors configured?",
|
|
'sensors-ipmi-root' => "Unable to run ipmi sensors. Are you root?",
|
|
'unmounted-data' => "No unmounted partitions found.",
|
|
'unmounted-data-bsd' => "No unmounted partition data found for this BSD system.",
|
|
'unmounted-file' => "No /proc/partitions file found.",
|
|
'usb-data' => "No USB data was found. Server?",
|
|
'unknown-desktop-version' => "ERR-101",
|
|
'unknown-dev' => "ERR-102",
|
|
'unknown-shell' => "ERR-100",
|
|
'weather-null' => "No $id found. Internet connection working?",
|
|
'xdpyinfo-missing' => '<xdpyinfo missing>',
|
|
);
|
|
return $unfound{$type};
|
|
}
|
|
|
|
# convert string passed to KB, based on GB/MB/TB id
|
|
# NOTE: K 1024 KB 1000
|
|
sub translate_size {
|
|
my ($working) = @_;
|
|
my $size = 0;
|
|
#print ":$working:\n";
|
|
return if ! defined $working;
|
|
my $math = ( $working =~ /B$/) ? 1000: 1024;
|
|
if ( $working =~ /^([0-9\.]+)M[B]?$/i){
|
|
$size = $1 * $math;
|
|
}
|
|
elsif ( $working =~ /^([0-9\.]+)G[B]?$/i){
|
|
$size = $1 * $math**2;
|
|
}
|
|
elsif ( $working =~ /^([0-9\.]+)T[B]?$/i){
|
|
$size = $1 * $math**3;
|
|
}
|
|
elsif ( $working =~ /^([0-9\.]+)P[B]?$/i){
|
|
$size = $1 * $math**4;
|
|
}
|
|
elsif ( $working =~ /^([0-9\.]+)E[B]?$/i){
|
|
$size = $1 * $math**5;
|
|
}
|
|
elsif ( $working =~ /^([0-9\.]+)K[B]?$/i){
|
|
$size = $1;
|
|
}
|
|
$size = int($size) if $size;
|
|
return $size;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### GENERATE OUTPUT
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub check_output_path {
|
|
my ($path) = @_;
|
|
my ($b_good,$dir,$file);
|
|
$dir = $path;
|
|
$dir =~ s/([^\/]+)$//;
|
|
$file = $1;
|
|
# print "file: $file : dir: $dir\n";
|
|
$b_good = 1 if (-d $dir && -w $dir && $dir =~ /^\// && $file);
|
|
return $b_good;
|
|
}
|
|
|
|
sub output_handler {
|
|
my (%data) = @_;
|
|
# print Dumper \%data;
|
|
if ($output_type eq 'screen'){
|
|
print_data(%data);
|
|
}
|
|
elsif ($output_type eq 'json'){
|
|
generate_json(%data);
|
|
}
|
|
elsif ($output_type eq 'xml'){
|
|
generate_xml(%data);
|
|
}
|
|
}
|
|
|
|
# NOTE: file has already been set and directory verified
|
|
sub generate_json {
|
|
eval $start if $b_log;
|
|
my (%data) = @_;
|
|
my ($json);
|
|
my $b_debug = 1;
|
|
my ($b_cpanel,$b_valid);
|
|
error_handler('not-in-irc', 'help') if $b_irc;
|
|
#print Dumper \%data if $b_debug;
|
|
if (check_module('Cpanel::JSON::XS')){
|
|
import Cpanel::JSON::XS;
|
|
$json = Cpanel::JSON::XS::encode_json(\%data);
|
|
}
|
|
elsif (check_module('JSON::XS')){
|
|
import JSON::XS;
|
|
$json = JSON::XS::encode_json(\%data);
|
|
}
|
|
else {
|
|
error_handler('required-module', 'json', 'Cpanel::JSON::XS OR JSON::XS');
|
|
}
|
|
if ($json){
|
|
#$json =~ s/"[0-9]+#/"/g;
|
|
if ($output_file eq 'print'){
|
|
#$json =~ s/\}/}\n/g;
|
|
print "$json";
|
|
}
|
|
else {
|
|
print_line("Writing JSON data to: $output_file\n");
|
|
open(my $fh, '>', $output_file) or error_handler('open',$output_file,"$!");
|
|
print $fh "$json";
|
|
close $fh;
|
|
print_line("Data written successfully.\n");
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# NOTE: So far xml is substantially more difficult than json, so
|
|
# using a crude dumper rather than making a nice xml file, but at
|
|
# least xml has some output now.
|
|
sub generate_xml {
|
|
eval $start if $b_log;
|
|
my (%data) = @_;
|
|
my ($xml);
|
|
my $b_debug = 0;
|
|
error_handler('not-in-irc', 'help') if $b_irc;
|
|
#print Dumper \%data if $b_debug;
|
|
if (check_module('XML::Dumper')){
|
|
import XML::Dumper;
|
|
$xml = XML::Dumper::pl2xml(\%data);
|
|
#$xml =~ s/"[0-9]+#/"/g;
|
|
if ($output_file eq 'print'){
|
|
print "$xml";
|
|
}
|
|
else {
|
|
print_line("Writing XML data to: $output_file\n");
|
|
open(my $fh, '>', $output_file) or error_handler('open',$output_file,"$!");
|
|
print $fh "$xml";
|
|
close $fh;
|
|
print_line("Data written successfully.\n");
|
|
}
|
|
}
|
|
else {
|
|
error_handler('required-module', 'xml', 'XML::Dumper');
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub key {
|
|
return sprintf("%03d#%s", $_[0],$_[1]);
|
|
}
|
|
|
|
sub print_basic {
|
|
my (@data) = @_;
|
|
my $indent = 18;
|
|
my $indent_static = 18;
|
|
my $indent1_static = 5;
|
|
my $indent2_static = 8;
|
|
my $indent1 = 5;
|
|
my $indent2 = 8;
|
|
my $length = @data;
|
|
my ($start,$aref,$i,$j,$line);
|
|
|
|
if ( $size{'max'} > 110 ){
|
|
$indent_static = 22;
|
|
}
|
|
elsif ($size{'max'} < 90 ){
|
|
$indent_static = 15;
|
|
}
|
|
# print $length . "\n";
|
|
for my $i (0 .. $#data){
|
|
$aref = $data[$i];
|
|
#print "0: $data[$i][0]\n";
|
|
if ($data[$i][0] == 0 ){
|
|
$indent = 0;
|
|
$indent1 = 0;
|
|
$indent2 = 0;
|
|
}
|
|
elsif ($data[$i][0] == 1 ){
|
|
$indent = $indent_static;
|
|
$indent1 = $indent1_static;
|
|
$indent2= $indent2_static;
|
|
}
|
|
elsif ($data[$i][0] == 2 ){
|
|
$indent = ( $indent_static + 7 );
|
|
$indent1 = ( $indent_static + 5 );
|
|
$indent2 = 0;
|
|
}
|
|
$data[$i][3] =~ s/\n/ /g;
|
|
$data[$i][3] =~ s/\s+/ /g;
|
|
if ($data[$i][1] && $data[$i][2]){
|
|
$data[$i][1] = $data[$i][1] . ', ';
|
|
}
|
|
$start = sprintf("%${indent1}s%-${indent2}s",$data[$i][1],$data[$i][2]);
|
|
if ($indent > 1 && ( length($start) > ( $indent - 1) ) ){
|
|
$line = sprintf("%-${indent}s\n", "$start");
|
|
print_line($line);
|
|
$start = '';
|
|
#print "1-print.\n";
|
|
}
|
|
if ( ( $indent + length($data[$i][3]) ) < $size{'max'} ){
|
|
$data[$i][3] =~ s/\^/ /g;
|
|
$line = sprintf("%-${indent}s%s\n", "$start", $data[$i][3]);
|
|
print_line($line);
|
|
#print "2-print.\n";
|
|
}
|
|
else {
|
|
my $holder = '';
|
|
my $sep = ' ';
|
|
foreach my $word (split / /, $data[$i][3]){
|
|
#print "$word\n";
|
|
if ( ( $indent + length($holder) + length($word) ) < $size{'max'} ) {
|
|
$word =~ s/\^/ /g;
|
|
$holder .= $word . $sep;
|
|
#print "3-hold.\n";
|
|
}
|
|
#elsif ( ( $indent + length($holder) + length($word) ) >= $size{'max'}){
|
|
else {
|
|
$line = sprintf("%-${indent}s%s\n", "$start", $holder);
|
|
print_line($line);
|
|
$start = '';
|
|
$word =~ s/\^/ /g;
|
|
$holder = $word . $sep;
|
|
#print "4-print-hold.\n";
|
|
}
|
|
}
|
|
if ($holder !~ /^[ ]*$/){
|
|
$line = sprintf("%-${indent}s%s\n", "$start", $holder);
|
|
print_line($line);
|
|
#print "5-print-last.\n";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
# this has to get a hash of hashes, at least for now.
|
|
# because perl does not retain insertion order, I use a prefix for each
|
|
# hash key to force sorts.
|
|
sub print_data {
|
|
my (%data) = @_;
|
|
my $array = 0;
|
|
my $array_holder = 1;
|
|
my $counter=0;
|
|
my $split_count = 0;
|
|
my $hash = 0;
|
|
my $holder = '';
|
|
my $id_holder = 0;
|
|
my $start = '';
|
|
my $start2 = '';
|
|
my $length = 0;
|
|
my $indent = $size{'indent'};
|
|
my (@temp,@working,@values,%ids,$holder2,%row);
|
|
my ($key,$line,$val2,$val3);
|
|
# $size{'max'} = 88;
|
|
# NOTE: indent < 11 would break the output badly in some cases
|
|
if ($size{'max'} < $size{'indent-min'} || $size{'indent'} < 11 ){
|
|
$indent = 2;
|
|
}
|
|
#foreach my $key1 (sort { (split/#/, $a)[0] <=> (split/#/, $b)[0] } keys %data) {
|
|
foreach my $key1 (sort { substr($a,0,3) <=> substr($b,0,3) } keys %data) {
|
|
#foreach my $key1 (sort { $a cmp $b } keys %data) {
|
|
$key = (split/#/, $key1)[1];
|
|
if ($key ne 'SHORT' ) {
|
|
$start = sprintf("$colors{'c1'}%-${indent}s$colors{'cn'}","$key$sep{'s1'}");
|
|
if ($indent < 10){
|
|
$line = "$start\n";
|
|
print_line($line);
|
|
$start = '';
|
|
$line = '';
|
|
}
|
|
}
|
|
else {
|
|
$indent = 0;
|
|
}
|
|
if (ref($data{$key1}) eq 'ARRAY'){
|
|
# @working = @{$data{$key1}};
|
|
%ids = (
|
|
'Array' => 1,
|
|
'array' => 1,
|
|
'Battery' => 1,
|
|
'Card' => 1,
|
|
'Device' => 1,
|
|
'Floppy' => 1,
|
|
'ID' => 1,
|
|
'IF-ID' => 1,
|
|
'Optical' => 1,
|
|
);
|
|
$array_holder = 1;
|
|
foreach my $val1 (@{$data{$key1}}){
|
|
$length = $indent;
|
|
if (ref($val1) eq 'HASH'){
|
|
#%row = %$val1;
|
|
$counter=0;
|
|
$split_count = 0;
|
|
$hash = scalar %$val1;
|
|
#foreach my $key2 (sort { (split/#/, $a)[0] <=> (split/#/, $b)[0] } keys %$val1){
|
|
foreach my $key2 (sort { substr($a,0,3) <=> substr($b,0,3) } keys %$val1){
|
|
#foreach my $key2 (sort { $a cmp $b } keys %$val1){
|
|
$key = (split/#/, $key2)[1];
|
|
# for ram with > 1 system array, we want to reset device count to 1 for each
|
|
# new array
|
|
if ($key eq 'Array' && $array_holder != $ids{$key} ){
|
|
$array_holder = $ids{$key};
|
|
$ids{'Device'} = 1 if ($ids{'Device'} > 1);
|
|
}
|
|
if ($key eq 'Device' && $ids{'array'} > 1 && $id_holder != $ids{$key} ){
|
|
$id_holder = $ids{$key};
|
|
$ids{'array'} = 1 if ($ids{'array'} > 1);
|
|
}
|
|
if ($counter == 0 && defined $ids{$key}){
|
|
$key .= '-' . $ids{$key}++;
|
|
}
|
|
$val2 = $$val1{$key2};
|
|
# we have to handle cases where $val2 is 0
|
|
if ($val2 || $val2 eq '0'){
|
|
$val2 .= " ";
|
|
}
|
|
# see: Use of implicit split to @_ is deprecated. Only get this warning
|
|
# in Perl 5.08 oddly enough.
|
|
@temp = split/\s+/, $val2;
|
|
$split_count = scalar @temp;
|
|
if ( ( length( "$key$sep{'s2'} $val2" ) + $length ) < $size{'max'} ) {
|
|
$length += length("$key$sep{'s2'} $val2");
|
|
$holder .= "$colors{'c1'}$key$sep{'s2'}$colors{'c2'} $val2";
|
|
#print "one\n";
|
|
}
|
|
# handle case where the opening key/value pair is > max, and where
|
|
# there are a lot of terms, like cpu flags, raid types supported. Raid
|
|
# can have the last row have a lot of devices, or many raid types
|
|
elsif ( ( length( "$key$sep{'s2'} $val2" ) + $indent ) > $size{'max'} &&
|
|
!defined $ids{$key} && $split_count > 2 ) {
|
|
@values = split/\s+/, $val2;
|
|
$val3 = shift @values;
|
|
# $length += length("$key$sep{'s2'} $val3 ") + $indent;
|
|
$start2 = "$colors{'c1'}$key$sep{'s2'}$colors{'c2'} $val3 ";
|
|
$holder2 = '';
|
|
$length += length("$key$sep{'s2'} $val3 ");
|
|
# print scalar @values,"\n";
|
|
foreach (@values){
|
|
# my $l = (length("$_ ") + $length);
|
|
#print "$l\n";
|
|
if ( (length("$_ ") + $length) < $size{'max'} ){
|
|
#print "a\n";
|
|
if ($start2){
|
|
$holder2 .= "$start2$_ ";
|
|
$start2 = '';
|
|
#$length += $length2;
|
|
#$length2 = 0;
|
|
}
|
|
else {
|
|
$holder2 .= "$_ ";
|
|
}
|
|
$length += length("$_ ");
|
|
}
|
|
else {
|
|
#print "three\n";
|
|
if ($start2){
|
|
$holder2 = "$start2$holder2";
|
|
}
|
|
else {
|
|
$holder2 = "$colors{'c2'}$holder2";
|
|
}
|
|
#print "xx:$holder";
|
|
$line = sprintf("%-${indent}s%s$colors{'cn'}\n","$start","$holder$holder2");
|
|
print_line($line);
|
|
$holder = '';
|
|
|
|
$holder2 = "$_ ";
|
|
#print "h2: $holder2\n";
|
|
$length = length($holder2) + $indent;
|
|
$start2 = '';
|
|
$start = '';
|
|
#$length2 = 0;
|
|
}
|
|
}
|
|
if ($holder2 !~ /^\s*$/){
|
|
#print "four\n";
|
|
$holder2 = "$colors{'c2'}$holder2";
|
|
$line = sprintf("%-${indent}s%s$colors{'cn'}\n","$start","$holder$holder2");
|
|
print_line($line);
|
|
$holder = '';
|
|
$holder2 = '';
|
|
$length = $indent;
|
|
$start2 = '';
|
|
$start = '';
|
|
#$length2 = 0;
|
|
}
|
|
}
|
|
else {
|
|
#print "H: $counter $hash\n";
|
|
if ($holder){
|
|
#print "five\n";
|
|
$line = sprintf("%-${indent}s%s$colors{'cn'}\n",$start,"$holder");
|
|
$holder = "$colors{'c1'}$key$sep{'s2'}$colors{'c2'} $val2";
|
|
$length = length("$key$sep{'s2'} $val2") + $indent;
|
|
print_line($line);
|
|
$start = '';
|
|
}
|
|
else {
|
|
#print "six\n";
|
|
$holder = "$colors{'c1'}$key$sep{'s2'}$colors{'c2'} $val2";
|
|
#$line = sprintf("%-${indent}s%s$colors{'cn'}\n",$start,"$holder");
|
|
$length = $indent;
|
|
#$holder = '';
|
|
}
|
|
}
|
|
$counter++;
|
|
}
|
|
if ($holder !~ /^\s*$/){
|
|
#print "seven\n";
|
|
$line = sprintf("%-${indent}s%s$colors{'cn'}\n",$start,"$start2$holder");
|
|
print_line($line);
|
|
$holder = '';
|
|
$length = 0;
|
|
$start = '';
|
|
}
|
|
}
|
|
# only for repos?
|
|
elsif (ref($val1) eq 'ARRAY'){
|
|
#print "eight\n";
|
|
$array=0;
|
|
foreach my $item (@$val1){
|
|
$array++;
|
|
$line = "$colors{'c1'}$array$sep{'s2'} $colors{'c2'}$item$colors{'cn'}";
|
|
$line = sprintf("%-${indent}s%s\n","","$line");
|
|
print_line($line);
|
|
}
|
|
}
|
|
else {
|
|
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
sub print_line {
|
|
my ($line) = @_;
|
|
if ($b_irc && $client{'test-konvi'}){
|
|
$client{'konvi'} = 3;
|
|
$client{'dobject'} = 'Konversation';
|
|
}
|
|
if ($client{'konvi'} == 1 && $client{'dcop'} ){
|
|
# konvi doesn't seem to like \n characters, it just prints them literally
|
|
$line =~ s/\n//g;
|
|
#qx('dcop "$client{'dport'}" "$client{'dobject'}" say "$client{'dserver'}" "$client{'dtarget'}" "$line 1");
|
|
system('dcop', $client{'dport'}, $client{'dobject'}, 'say', $client{'dserver'}, $client{'dtarget'}, "$line 1");
|
|
}
|
|
elsif ($client{'konvi'} == 3 && $client{'qdbus'} ){
|
|
# print $line;
|
|
$line =~ s/\n//g;
|
|
#qx(qdbus org.kde.konversation /irc say "$client{'dserver'}" "$client{'dtarget'}" "$line");
|
|
system('qdbus', 'org.kde.konversation', '/irc', 'say', $client{'dserver'}, $client{'dtarget'}, $line);
|
|
}
|
|
else {
|
|
print $line;
|
|
}
|
|
}
|
|
|
|
########################################################################
|
|
#### DATA PROCESSORS
|
|
########################################################################
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### PRIMARY DATA GENERATORS
|
|
#### -------------------------------------------------------------------
|
|
# 0 type
|
|
# 1 type_id
|
|
# 2 bus_id
|
|
# 3 sub_id
|
|
# 4 device
|
|
# 5 vendor_id
|
|
# 6 chip_id
|
|
# 7 rev
|
|
# 8 port
|
|
# 9 driver
|
|
# 10 modules
|
|
|
|
## AudioData
|
|
{
|
|
package AudioData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows);
|
|
my $num = 0;
|
|
if ($b_arm){
|
|
my $key = 'ARM';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('arm-pci',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
@data = card_data();
|
|
@rows = (@rows,@data);
|
|
}
|
|
if ( ( $b_arm || !@rows ) && (my $file = main::system_files('asound-cards') ) ){
|
|
@data = asound_data($file);
|
|
@rows = (@rows,@data);
|
|
}
|
|
@data = usb_data();
|
|
@rows = (@rows,@data);
|
|
if (!@rows){
|
|
my $key = 'Message';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('pci-card-data',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
@data = sound_server_data();
|
|
@rows = (@rows,@data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub card_data {
|
|
eval $start if $b_log;
|
|
my (@rows,@data);
|
|
my ($j,$num) = (0,1);
|
|
foreach (@pci){
|
|
$num = 1;
|
|
my @row = @$_;
|
|
if ($row[0] eq 'audio' || $row[0] eq 'multimedia'){
|
|
$j = scalar @rows;
|
|
my $driver = $row[9];
|
|
$driver ||= 'N/A';
|
|
my $card = $row[4];
|
|
$card = ($card) ? main::pci_cleaner($card,'output') : 'N/A';
|
|
# have seen absurdly verbose card descriptions, with non related data etc
|
|
if (length($card) > 85 || $size{'max'} < 110){
|
|
$card = main::pci_long_filter($card);
|
|
}
|
|
@data = ({
|
|
main::key($num++,'Card') => $card,
|
|
main::key($num++,'driver') => $driver,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0 && !$bsd_type){
|
|
if ($row[9] ){
|
|
my $version = main::get_module_version($row[9]);
|
|
$rows[$j]{main::key($num++,'v')} = $version if $version;
|
|
}
|
|
}
|
|
if ($extra > 0){
|
|
$rows[$j]{main::key($num++,'bus ID')} = "$row[2].$row[3]";
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = "$row[5]:$row[6]";
|
|
}
|
|
}
|
|
#print "$row[0]\n";
|
|
}
|
|
#my $ref = $pci[-1];
|
|
#print $$ref[0],"\n";
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# this handles fringe cases where there is no card on pcibus,
|
|
# but there is a card present. I don't know the exact architecture
|
|
# involved but I know this situation exists on at least one old machine.
|
|
sub asound_data {
|
|
eval $start if $b_log;
|
|
my ($file) = @_;
|
|
my (@asound,@rows,@data);
|
|
my ($card,$driver,$j,$num) = ('','',0,1);
|
|
@asound = main::reader($file);
|
|
foreach (@asound){
|
|
# filtering out modems and usb devices like webcams, this might get a
|
|
# usb audio card as well, this will take some trial and error
|
|
if ( !/modem|usb/i && /^\s*[0-9]/ ) {
|
|
$num = 1;
|
|
my @working = split /:\s*/, $_;
|
|
# now let's get 1 2
|
|
$working[1] =~ /(.*)\s+-\s+(.*)/;
|
|
$card = $2;
|
|
$driver = $1;
|
|
if ( $card ){
|
|
$j = scalar @rows;
|
|
$driver ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,'Card') => $card,
|
|
main::key($num++,'driver') => $driver,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
my $version = main::get_module_version($driver);
|
|
$rows[$j]{main::key($num++,'v')} = $version if $version;
|
|
$rows[$j]{main::key($num++,'message')} = main::row_defaults('pci-advanced-data','');
|
|
}
|
|
}
|
|
}
|
|
}
|
|
# print Data::Dumper:Dumper \s@rows;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub usb_data {
|
|
eval $start if $b_log;
|
|
my (@rows,@data,@ids,$driver,$product,$product2,@temp2,$vendor,$vendor2);
|
|
my ($j,$num) = (0,1);
|
|
if (-d '/proc/asound') {
|
|
# note: this will double the data, but it's easier this way.
|
|
# inxi tested for -L in the /proc/asound files, and used only those.
|
|
my @files = main::globber('/proc/asound/*/usbid');
|
|
foreach (@files){
|
|
my $id = (main::reader($_))[0];
|
|
push @ids, $id if ($id && ! grep {/$id/} @ids);
|
|
}
|
|
# lsusb is a very expensive operation
|
|
if (@ids){
|
|
if (!$bsd_type && !$b_usb_check){
|
|
main::set_usb_data();
|
|
$b_usb_check = 1;
|
|
}
|
|
}
|
|
main::log_data('dump','@ids',\@ids) if $b_log;
|
|
return if !@usb;
|
|
foreach my $id (@ids){
|
|
$j = scalar @rows;
|
|
foreach my $ref (@usb){
|
|
my @row = @$ref;
|
|
# a device will always be the second or > device on the bus
|
|
if ($row[1] > 1 && $row[2] eq $id){
|
|
$num = 1;
|
|
# makre sure to reset, or second device trips last flag
|
|
($product,$product2,$vendor,$vendor2) = ('','','','');
|
|
if ($usb_level == 1){
|
|
$product = main::cleaner($row[3]);
|
|
}
|
|
else {
|
|
foreach my $line (@row){
|
|
my @working = split /:/, $line;
|
|
if ($working[0] eq 'idVendor' && $working[2]){
|
|
$vendor = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'idProduct' && $working[2]){
|
|
$product = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'iManufacturer' && $working[2]){
|
|
$vendor2 = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'iProduct' && $working[2]){
|
|
$product2 = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'Descriptor_Configuration'){
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
if ($vendor && $product){
|
|
$product = ($product =~ /$vendor/) ? $product: "$vendor $product" ;
|
|
}
|
|
elsif (!$product) {
|
|
if ($vendor && $product2){
|
|
$product = ($product2 =~ /$vendor/) ? $product2: "$vendor $product2" ;
|
|
}
|
|
elsif ($vendor2 && $product2){
|
|
$product = ($product2 =~ /$vendor2/) ? $product2: "$vendor2 $product2" ;
|
|
}
|
|
elsif ($vendor){
|
|
$product = $vendor;
|
|
}
|
|
elsif ($vendor2){
|
|
$product = $vendor2;
|
|
}
|
|
else {
|
|
$product = 'N/A';
|
|
}
|
|
}
|
|
@temp2 = main::get_usb_drivers($row[0],$row[2]) if !$bsd_type && -d "/sys/devices";
|
|
if (@temp2 && $temp2[0]){
|
|
$driver = $temp2[0];
|
|
}
|
|
$driver ||= 'snd-usb-audio';
|
|
@data = ({
|
|
main::key($num++,'Card') => $product,
|
|
main::key($num++,'type') => 'USB',
|
|
main::key($num++,'driver') => $driver,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
$rows[$j]{main::key($num++,'bus ID')} = "$row[0]:$row[1]";
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = $row[2];
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub sound_server_data {
|
|
eval $start if $b_log;
|
|
my (@data,$server,$version);
|
|
my $num = 0;
|
|
if (my $file = main::system_files('asound-version') ){
|
|
my $content = (main::reader($file))[0];
|
|
# some alsa strings have the build date in (...)
|
|
# remove trailing . and remove possible second line if compiled by user
|
|
# foreach (@content){
|
|
# if (!/compile/i){
|
|
#$_ =~ s/Advanced Linux Sound Architecture/ALSA/;
|
|
$version = (split /\s+/, $content)[-1];
|
|
$version =~ s/\.$//; # trim off period
|
|
$server = 'ALSA';
|
|
# }
|
|
# }
|
|
}
|
|
elsif (my $program = main::check_program('oss')){
|
|
$server = 'OSS';
|
|
$version = main::program_version('oss','\S',2);
|
|
$version ||= 'N/A';
|
|
}
|
|
if ($server){
|
|
@data = ({
|
|
main::key($num++,'Sound Server') => $server,
|
|
main::key($num++,'v') => $version,
|
|
},);
|
|
}
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
}
|
|
|
|
## BatteryData
|
|
{
|
|
package BatteryData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@rows,$key1,%battery,$val1);
|
|
my $num = 0;
|
|
if ($bsd_type || $b_dmidecode_force){
|
|
my $ref = $alerts{'dmidecode'};
|
|
if ( $$ref{'action'} ne 'use'){
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
$key1 = ucfirst($key1);
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
else {
|
|
%battery = battery_data_dmi();
|
|
if (!%battery){
|
|
if ($show{'battery-forced'}){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('battery-data','');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
}
|
|
else {
|
|
@rows = create_output(%battery);
|
|
}
|
|
}
|
|
}
|
|
elsif (-d '/sys/class/power_supply/'){
|
|
%battery = battery_data_sys();
|
|
if (!%battery){
|
|
if ($show{'battery-forced'}){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('battery-data','');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
}
|
|
else {
|
|
@rows = create_output(%battery);
|
|
}
|
|
}
|
|
else {
|
|
if ($show{'battery-forced'}){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('battery-data-sys','');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# alarm capacity capacity_level charge_full charge_full_design charge_now
|
|
# cycle_count energy_full energy_full_design energy_now location manufacturer model_name
|
|
# power_now present serial_number status technology type voltage_min_design voltage_now
|
|
# 0 name - battery id, not used
|
|
# 1 status
|
|
# 2 present
|
|
# 3 technology
|
|
# 4 cycle_count
|
|
# 5 voltage_min_design
|
|
# 6 voltage_now
|
|
# 7 power_now
|
|
# 8 energy_full_design
|
|
# 9 energy_full
|
|
# 10 energy_now
|
|
# 11 capacity
|
|
# 12 capacity_level
|
|
# 13 of_orig
|
|
# 14 model_name
|
|
# 15 manufacturer
|
|
# 16 serial_number
|
|
# 17 location
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (%battery,@data,@rows) = @_;
|
|
my ($key);
|
|
my $num = 0;
|
|
my $j = 0;
|
|
foreach $key (sort keys %battery){
|
|
$num = 0;
|
|
my ($charge,$condition,$model,$serial,$status,$volts) = ('','','','','','');
|
|
my ($chemistry,$cycles,$location) = ('','','');
|
|
# $battery{$key}{''};
|
|
# we need to handle cases where charge or energy full is 0
|
|
$charge = ($battery{$key}{'energy_now'} || $battery{$key}{'energy_now'} eq 0) ? "$battery{$key}{'energy_now'} Wh" : 'N/A';
|
|
if ($battery{$key}{'energy_full'} || $battery{$key}{'energy_full_design'}){
|
|
$battery{$key}{'energy_full_design'} ||= 'N/A';
|
|
$battery{$key}{'energy_full'}= ($battery{$key}{'energy_full'} || $battery{$key}{'energy_full'} eq 0) ? $battery{$key}{'energy_full'} : 'N/A';
|
|
$condition = "$battery{$key}{'energy_full'}/$battery{$key}{'energy_full_design'} Wh";
|
|
if ($battery{$key}{'of_orig'}){
|
|
$condition .= " ($battery{$key}{'of_orig'}%)";
|
|
}
|
|
}
|
|
$condition ||= 'N/A';
|
|
$j = scalar @rows;
|
|
@data = ({
|
|
main::key($num++,'ID') => $key,
|
|
main::key($num++,'charge') => $charge,
|
|
main::key($num++,'condition') => $condition,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
if ($extra > 1){
|
|
if ($battery{$key}{'voltage_min_design'} || $battery{$key}{'voltage_now'}){
|
|
$battery{$key}{'voltage_min_design'} ||= 'N/A';
|
|
$battery{$key}{'voltage_now'} ||= 'N/A';
|
|
$volts = "$battery{$key}{'voltage_now'}/$battery{$key}{'voltage_min_design'}";
|
|
}
|
|
$volts ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'volts')} = $volts;
|
|
}
|
|
if ($battery{$key}{'manufacturer'} || $battery{$key}{'model_name'}) {
|
|
if ($battery{$key}{'manufacturer'} && $battery{$key}{'model_name'}){
|
|
$model = "$battery{$key}{'manufacturer'} $battery{$key}{'model_name'}";
|
|
}
|
|
elsif ($battery{$key}{'manufacturer'}){
|
|
$model = $battery{$key}{'manufacturer'};
|
|
}
|
|
elsif ($battery{$key}{'model_name'}){
|
|
$model = $battery{$key}{'model_name'};
|
|
}
|
|
}
|
|
else {
|
|
$model = 'N/A';
|
|
}
|
|
$rows[$j]{main::key($num++,'model')} = $model;
|
|
if ($extra > 2){
|
|
$chemistry = ( $battery{$key}{'technology'} ) ? $battery{$key}{'technology'}: 'N/A';
|
|
$rows[$j]{main::key($num++,'type')} = $chemistry;
|
|
}
|
|
if ($extra > 1){
|
|
$serial = main::apply_filter($battery{$key}{'serial_number'});
|
|
$rows[$j]{main::key($num++,'serial')} = $serial;
|
|
}
|
|
$status = ($battery{$key}{'status'}) ? $battery{$key}{'status'}: 'N/A';
|
|
$rows[$j]{main::key($num++,'status')} = $status;
|
|
if ($extra > 2){
|
|
if ($battery{$key}{'cycle_count'}){
|
|
$rows[$j]{main::key($num++,'cycles')} = $battery{$key}{'cycle_count'};
|
|
}
|
|
if ($battery{$key}{'location'}){
|
|
$rows[$j]{main::key($num++,'location')} = $battery{$key}{'location'};
|
|
}
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
# charge: mAh energy: Wh
|
|
sub battery_data_sys {
|
|
eval $start if $b_log;
|
|
my ($b_ma,%battery,$file,$id,$item,$path,$value);
|
|
my $num = 0;
|
|
# NOTE: known ids: BAT[0-9] CMB[0-9]
|
|
my @batteries = main::globber("/sys/class/power_supply/[BC][AM][TB]*/");
|
|
# note: there is no 'location' file, but dmidecode has it
|
|
# 'type' is generic, like: Battery
|
|
# capacity_level is a string, like: Normal
|
|
my @items = qw(alarm capacity capacity_level charge_full charge_full_design charge_now
|
|
cycle_count energy_full energy_full_design energy_now location manufacturer model_name
|
|
power_now present serial_number status technology type voltage_min_design voltage_now);
|
|
foreach $item (@batteries){
|
|
$b_ma = 0;
|
|
$id = $item;
|
|
$id =~ s%/sys/class/power_supply/|\/$%%g;
|
|
$battery{$id} = ({});
|
|
foreach $file (@items){
|
|
$path = "$item$file";
|
|
$value = (-f $path) ? (main::reader($path))[0]: '';
|
|
if ($value){
|
|
if ($file eq 'voltage_min_design'){
|
|
$value = sprintf("%.1f", $value/1000000);
|
|
}
|
|
elsif ($file eq 'voltage_now'){
|
|
$value = sprintf("%.1f", $value/1000000);
|
|
}
|
|
elsif ($file eq 'energy_full_design'){
|
|
$value = $value/1000000;
|
|
}
|
|
elsif ($file eq 'energy_full'){
|
|
$value = $value/1000000;
|
|
}
|
|
elsif ($file eq 'energy_now'){
|
|
$value = sprintf("%.1f", $value/1000000);
|
|
}
|
|
# note: the following 3 were off, 100000 instead of 1000000
|
|
# why this is, I do not know. I did not document any reason for that
|
|
# so going on assumption it is a mistake. CHARGE is mAh, which are converted
|
|
# to Wh by: mAh x voltage. Note: voltage fluctuates so will make results vary slightly.
|
|
elsif ($file eq 'charge_full_design'){
|
|
$value = $value/1000000;
|
|
$b_ma = 1;
|
|
}
|
|
elsif ($file eq 'charge_full'){
|
|
$value = $value/1000000;
|
|
$b_ma = 1;
|
|
}
|
|
elsif ($file eq 'charge_now'){
|
|
$value = $value/1000000;
|
|
$b_ma = 1;
|
|
}
|
|
elsif ($file eq 'manufacturer'){
|
|
$value = main::dmi_cleaner($value);
|
|
}
|
|
elsif ($file eq 'model_name'){
|
|
$value = main::dmi_cleaner($value);
|
|
}
|
|
}
|
|
elsif ($b_root && -e $path && ! -r $path ){
|
|
$value = main::row_defaults('root-required');
|
|
}
|
|
$battery{$id}{$file} = $value;
|
|
# print "$battery{$id}{$file}\n";
|
|
}
|
|
# note:voltage_now fluctuates, which will make capacity numbers change a bit
|
|
# if any of these values failed, the math will be wrong, but no way to fix that
|
|
# tests show more systems give right capacity/charge with voltage_min_design
|
|
# than with voltage_now
|
|
if ($b_ma && $battery{$id}{'voltage_min_design'}){
|
|
if ($battery{$id}{'charge_now'}){
|
|
$battery{$id}{'energy_now'} = $battery{$id}{'charge_now'} * $battery{$id}{'voltage_min_design'};
|
|
}
|
|
if ($battery{$id}{'charge_full'}){
|
|
$battery{$id}{'energy_full'} = $battery{$id}{'charge_full'}*$battery{$id}{'voltage_min_design'};
|
|
}
|
|
if ($battery{$id}{'charge_full_design'}){
|
|
$battery{$id}{'energy_full_design'} = $battery{$id}{'charge_full_design'} * $battery{$id}{'voltage_min_design'};
|
|
}
|
|
}
|
|
if ( $battery{$id}{'energy_now'} && $battery{$id}{'energy_full'} ){
|
|
$battery{$id}{'capacity'} = 100 * $battery{$id}{'energy_now'}/$battery{$id}{'energy_full'};
|
|
$battery{$id}{'capacity'} = sprintf( "%.1f", $battery{$id}{'capacity'} );
|
|
}
|
|
if ( $battery{$id}{'energy_full_design'} && $battery{$id}{'energy_full'} ){
|
|
$battery{$id}{'of_orig'} = 100 * $battery{$id}{'energy_full'}/$battery{$id}{'energy_full_design'};
|
|
$battery{$id}{'of_orig'} = sprintf( "%.0f", $battery{$id}{'of_orig'} );
|
|
}
|
|
if ( $battery{$id}{'energy_now'} ){
|
|
$battery{$id}{'energy_now'} = sprintf( "%.1f", $battery{$id}{'energy_now'} );
|
|
}
|
|
if ( $battery{$id}{'energy_full_design'} ){
|
|
$battery{$id}{'energy_full_design'} = sprintf( "%.1f",$battery{$id}{'energy_full_design'} );
|
|
}
|
|
if ( $battery{$id}{'energy_full'} ){
|
|
$battery{$id}{'energy_full'} = sprintf( "%.1f", $battery{$id}{'energy_full'} );
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return %battery;
|
|
}
|
|
# note, dmidecode does not have charge_now or charge_full
|
|
sub battery_data_dmi {
|
|
eval $start if $b_log;
|
|
my (%battery,$id);
|
|
my $i = 0;
|
|
foreach (@dmi){
|
|
my @ref = @$_;
|
|
# Portable Battery
|
|
if ($ref[0] == 22){
|
|
$id = "BAT$i";
|
|
$i++;
|
|
$battery{$id} = ({});
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
foreach my $item (@ref){
|
|
my @value = split /:\s+/, $item;
|
|
next if !$value[0];
|
|
if ($value[0] eq 'Location') {$battery{$id}{'location'} = $value[1] }
|
|
elsif ($value[0] eq 'Manufacturer') {$battery{$id}{'manufacturer'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] =~ /Chemistry/) {$battery{$id}{'technology'} = $value[1] }
|
|
elsif ($value[0] =~ /Serial Number/) {$battery{$id}{'serial_number'} = $value[1] }
|
|
elsif ($value[0] =~ /^Name/) {$battery{$id}{'model_name'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Design Capacity') {
|
|
$value[1] =~ s/\s*mwh$//i;
|
|
$battery{$id}{'energy_full_design'} = sprintf( "%.1f", $value[1]/1000);
|
|
}
|
|
elsif ($value[0] eq 'Design Voltage') {
|
|
$value[1] =~ s/\s*mv$//i;
|
|
$battery{$id}{'voltage_min_design'} = sprintf( "%.1f", $value[1]/1000);
|
|
}
|
|
}
|
|
if ($battery{$id}{'energy_now'} && $battery{$id}{'energy_full'} ){
|
|
$battery{$id}{'capacity'} = 100 * $battery{$id}{'energy_now'} / $battery{$id}{'energy_full'};
|
|
$battery{$id}{'capacity'} = sprintf( "%.1f%", $battery{$id}{'capacity'} );
|
|
}
|
|
if ($battery{$id}{'energy_full_design'} && $battery{$id}{'energy_full'} ){
|
|
$battery{$id}{'of_orig'} = 100 * $battery{$id}{'energy_full'} / $battery{$id}{'energy_full_design'};
|
|
$battery{$id}{'of_orig'} = sprintf( "%.0f%", $battery{$id}{'of_orig'} );
|
|
}
|
|
}
|
|
elsif ($ref[0] > 22){
|
|
last;
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \%battery;
|
|
eval $end if $b_log;
|
|
return %battery;
|
|
}
|
|
}
|
|
|
|
## CpuData
|
|
{
|
|
package CpuData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my (@data,@rows,$single,$key1,$val1);
|
|
my $num = 0;
|
|
if ($type eq 'short' || $type eq 'basic'){
|
|
@rows = data_short($type);
|
|
}
|
|
else {
|
|
@rows = create_output_full();
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output_full {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my ($b_flags,$flag_key,@flags,%cpu,@data,@rows);
|
|
my $sleep = $cpu_sleep * 1000000;
|
|
if ($b_hires){
|
|
eval 'Time::HiRes::usleep( $sleep )';
|
|
}
|
|
else {
|
|
select(undef, undef, undef, $cpu_sleep);
|
|
}
|
|
if (my $file = main::system_files('cpuinfo')){
|
|
%cpu = data_cpuinfo($file,'full');
|
|
}
|
|
elsif ($bsd_type ){
|
|
my ($key1,$val1) = ('','');
|
|
if ( $alerts{'sysctl'} ){
|
|
if ( $alerts{'sysctl'}{'action'} eq 'use' ){
|
|
# $key1 = 'Status';
|
|
# $val1 = main::row_defaults('dev');
|
|
%cpu = data_sysctl('full');
|
|
}
|
|
else {
|
|
$key1 = ucfirst($alerts{'sysctl'}{'action'});
|
|
$val1 = $alerts{'sysctl'}{$alerts{'sysctl'}{'action'}};
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
return @data;
|
|
}
|
|
}
|
|
}
|
|
my %properties = cpu_properties(%cpu);
|
|
my $type = ($properties{'cpu-type'}) ? $properties{'cpu-type'}: '';
|
|
my $ref = $cpu{'processors'};
|
|
my @processors = @$ref;
|
|
my @speeds = cpu_speeds(@processors);
|
|
my $j = scalar @rows;
|
|
$cpu{'model_name'} ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,'Topology') => $properties{'cpu-layout'},
|
|
main::key($num++,'model') => $cpu{'model_name'},
|
|
},);
|
|
@rows = (@rows,@data);
|
|
$properties{'bits-sys'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'bits')} = $properties{'bits-sys'};
|
|
if ($type){
|
|
$rows[$j]{main::key($num++,'type')} = $type;
|
|
}
|
|
if ($extra > 0){
|
|
$cpu{'arch'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'arch')} = $cpu{'arch'};
|
|
if ( $cpu{'arch'} ne 'N/A' && $cpu{'rev'} ){
|
|
$rows[$j]{main::key($num++,'rev')} = $cpu{'rev'};
|
|
}
|
|
}
|
|
$properties{'l2-cache'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'L2 cache')} = $properties{'l2-cache'} if (!$b_arm || ($b_arm && $properties{'l2-cache'} ne 'N/A'));
|
|
if ($extra > 0 && !$show{'cpu-flag'}){
|
|
$j = scalar @rows;
|
|
@flags = split /\s+/, $cpu{'flags'} if $cpu{'flags'};
|
|
$flag_key = ($b_arm || $bsd_type) ? 'features': 'flags';
|
|
my $flag = 'N/A';
|
|
if (@flags){
|
|
# failure to read dmesg.boot: dmesg.boot permissions
|
|
@flags = grep {/^(dmesg.boot|lm|nx|pae|permissions|pni|svm|vmx|(sss|ss)e([2-9])?([a-z])?(_[0-9])?)$/} @flags;
|
|
@flags = map {s/pni/sse3/; $_} @flags;
|
|
@flags = sort(@flags);
|
|
$flag = join ' ', @flags if @flags;
|
|
}
|
|
if ($b_arm && $flag eq 'N/A'){
|
|
$flag = main::row_defaults('arm-cpu-f');
|
|
}
|
|
@data = ({
|
|
main::key($num++,$flag_key) => $flag,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
$b_flags = 1;
|
|
}
|
|
if ($extra > 0 && !$bsd_type){
|
|
my $bogomips = ($cpu{'bogomips'}) ? int($cpu{'bogomips'}) : 'N/A';
|
|
$rows[$j]{main::key($num++,'bogomips')} = $bogomips;
|
|
}
|
|
$j = scalar @rows;
|
|
my $core_key = (scalar @speeds > 1) ? 'Core speeds (MHz)' : 'Core speed (MHz)';
|
|
my $speed_key = ($properties{'speed-key'}) ? $properties{'speed-key'}: 'Speed';
|
|
my $min_max = ($properties{'min-max'}) ? $properties{'min-max'}: 'N/A';
|
|
my $min_max_key = ($properties{'min-max-key'}) ? $properties{'min-max-key'}: 'min/max';
|
|
my $speed = (defined $properties{'speed'}) ? $properties{'speed'}: 'N/A';
|
|
# aren't able to get per core speeds in bsds yet
|
|
my $core_speeds_value = (@speeds) ? '' : 'N/A';
|
|
$j = scalar @rows;
|
|
@data = ({
|
|
main::key($num++,$speed_key) => $speed,
|
|
main::key($num++,$min_max_key) => $min_max,
|
|
main::key($num++,$core_key) => $core_speeds_value,
|
|
}, );
|
|
@rows = (@rows,@data);
|
|
my $i = 1;
|
|
foreach (@speeds){
|
|
$rows[$j]{main::key($num++,$i++)} = $_;
|
|
}
|
|
if ($show{'cpu-flag'} && !$b_flags){
|
|
$flag_key = ($b_arm || $bsd_type) ? 'Features': 'Flags';
|
|
@flags = split /\s+/, $cpu{'flags'} if $cpu{'flags'};
|
|
my $flag = 'N/A';
|
|
if (@flags){
|
|
@flags = sort(@flags);
|
|
$flag = join ' ', @flags if @flags;
|
|
}
|
|
@data = ({
|
|
main::key($num++,$flag_key) => $flag,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output_short {
|
|
eval $start if $b_log;
|
|
my (@cpu) = @_;
|
|
my @data;
|
|
my $num = 0;
|
|
$cpu[1] ||= main::row_defaults('cpu-model-null');
|
|
$cpu[2] ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,$cpu[0]) => $cpu[1],
|
|
main::key($num++,'type') => $cpu[2],
|
|
},);
|
|
if ($extra > 0){
|
|
$data[0]{main::key($num++,'arch')} = $cpu[7];
|
|
}
|
|
$data[0]{main::key($num++,$cpu[3])} = $cpu[4];
|
|
if ($cpu[6]){
|
|
$data[0]{main::key($num++,$cpu[5])} = $cpu[6];
|
|
}
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
sub data_short {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my $num = 0;
|
|
my (%cpu,@data,%speeds);
|
|
my $sys = '/sys/devices/system/cpu/cpufreq/policy0';
|
|
my $sleep = $cpu_sleep * 1000000;
|
|
if ($b_hires){
|
|
eval 'Time::HiRes::usleep( $sleep )';
|
|
}
|
|
else {
|
|
select(undef, undef, undef, $cpu_sleep);
|
|
}
|
|
# NOTE: : Permission denied, ie, this is not always readable
|
|
# /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
|
|
if (my $file = main::system_files('cpuinfo')){
|
|
%cpu = data_cpuinfo($file,$type);
|
|
}
|
|
elsif ($bsd_type ){
|
|
my ($key1,$val1) = ('','');
|
|
if ( $alerts{'sysctl'} ){
|
|
if ( $alerts{'sysctl'}{'action'} eq 'use' ){
|
|
# $key1 = 'Status';
|
|
# $val1 = main::row_defaults('dev');
|
|
%cpu = data_sysctl($type);
|
|
}
|
|
else {
|
|
$key1 = ucfirst($alerts{'sysctl'}{'action'});
|
|
$val1 = $alerts{'sysctl'}{$alerts{'sysctl'}{'action'}};
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
return @data;
|
|
}
|
|
}
|
|
}
|
|
# $cpu{'cur-freq'} = $cpu[0]{'core-id'}[0]{'speed'};
|
|
if ($type eq 'short' || $type eq 'basic'){
|
|
@data = prep_short_data(%cpu);
|
|
}
|
|
if ($type eq 'basic'){
|
|
@data = create_output_short(@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
|
|
sub prep_short_data {
|
|
eval $start if $b_log;
|
|
my (%cpu) = @_;
|
|
my %properties = cpu_properties(%cpu);
|
|
my ($cpu,$speed_key,$speed,$type) = ('','speed',0,'');
|
|
$cpu = $cpu{'model_name'} if $cpu{'model_name'};
|
|
$type = $properties{'cpu-type'} if $properties{'cpu-type'};
|
|
$speed_key = $properties{'speed-key'} if $properties{'speed-key'};
|
|
$speed = $properties{'speed'} if $properties{'speed'};
|
|
my @result = (
|
|
$properties{'cpu-layout'},
|
|
$cpu,
|
|
$type,
|
|
$speed_key,
|
|
$speed,
|
|
$properties{'min-max-key'},
|
|
$properties{'min-max'},
|
|
);
|
|
if ($extra > 0){
|
|
$cpu{'arch'} ||= 'N/A';
|
|
$result[7] = $cpu{'arch'};
|
|
}
|
|
eval $end if $b_log;
|
|
return @result;
|
|
}
|
|
|
|
sub data_cpuinfo {
|
|
eval $start if $b_log;
|
|
my ($file,$type)= @_;
|
|
my ($arch,@ids,@line,$b_first,$b_proc_int,$starter);
|
|
# use --arm flag when testing arm cpus
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/arm-4-core-pinebook-1.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/armv6-single-core-1.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/armv7-dual-core-1.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/armv7-new-format-model-name-single-core.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/arm-2-die-96-core-rk01.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/16-core-32-mt-ryzen.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/2-16-core-epyc-abucodonosor.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/2-core-probook-antix.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/4-core-jean-antix.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/4-core-althlon-mjro.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/4-core-apu-vc-box.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/amd/4-core-a10-5800k-1.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/2-core-ht-atom-bruh.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/core-2-i3.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/8-core-i7-damentz64.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/2-10-core-xeon-ht.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/4-core-xeon-fake-dual-die-zyanya.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/2-core-i5-fake-dual-die-hek.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/2-1-core-xeon-vm-vs2017.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/4-1-core-xeon-vps-frodo1.txt";
|
|
# $file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/intel/4-6-core-xeon-no-mt-lathander.txt";
|
|
my %speeds = set_cpu_speeds_sys();
|
|
my @cpuinfo = main::reader($file);
|
|
my @phys_cpus = (0);# start with 1 always
|
|
my ($cache,$core_count,$die_holder,$die_id,$phys_id,$proc_count,$speed) = (0,0,0,0,0,0,0);
|
|
my ($phys_holder) = (undef);
|
|
# need to prime for arm cpus, which do not have physical/core ids usually
|
|
# level 0 is phys id, level 1 is die id, level 2 is core id
|
|
#$ids[0] = ([(0)]);
|
|
$ids[0] = ([]);
|
|
$ids[0][0] = ([]);
|
|
my %cpu = set_cpu_data();
|
|
# note, there con be a lot of processors, 32 core HT would have 64, for example.
|
|
foreach (@cpuinfo){
|
|
next if /^\s*$/;
|
|
@line = split /\s*:\s*/, $_;
|
|
next if !$line[0];
|
|
$starter = $line[0]; # preserve case for one specific ARM issue
|
|
$line[0] = lc($line[0]);
|
|
if ($b_arm && !$b_first && $starter eq 'Processor' && $line[1] !~ /^\d+$/){
|
|
#print "l1:$line[1]\n";
|
|
$cpu{'model_name'} = main::cleaner($line[1]);
|
|
$cpu{'model_name'} = cpu_cleaner($cpu{'model_name'});
|
|
$cpu{'type'} = 'arm';
|
|
# Processor : AArch64 Processor rev 4 (aarch64)
|
|
# Processor : Feroceon 88FR131 rev 1 (v5l)
|
|
if ($cpu{'model_name'} && $cpu{'model_name'} =~ /(.*)\srev\s([\S]+)\s(\(([\S]+)\))?/){
|
|
$cpu{'model_name'} = $1;
|
|
$cpu{'rev'} = $2;
|
|
if ($4){
|
|
$cpu{'arch'} = $4;
|
|
$cpu{'model_name'} .= ' ' . $cpu{'arch'} if $cpu{'model_name'} !~ /$cpu{'arch'}/i;
|
|
}
|
|
$cpu{'processors'}[$proc_count] = 0;
|
|
$b_proc_int = 0;
|
|
$b_first = 1;
|
|
#print "p0:\n";
|
|
}
|
|
}
|
|
elsif ($line[0] eq 'processor'){
|
|
# this protects against double processor lines, one int, one string
|
|
if ($line[1] =~ /^\d+$/){
|
|
$b_proc_int = 1;
|
|
$b_first = 1;
|
|
$cpu{'processors'}[$proc_count] = 0;
|
|
$proc_count++;
|
|
#print "p1: $proc_count\n";
|
|
}
|
|
else {
|
|
if (!$b_proc_int){
|
|
$cpu{'processors'}[$proc_count] = 0;
|
|
$proc_count++;
|
|
#print "p2a: $proc_count\n";
|
|
}
|
|
if (!$b_first ){
|
|
# note: alternate:
|
|
# Processor : AArch64 Processor rev 4 (aarch64)
|
|
# but no model name type
|
|
if ( $b_arm || $line[1] =~ /ARM|AArch/i){
|
|
$b_arm = 1;
|
|
$cpu{'type'} = 'arm';
|
|
}
|
|
$cpu{'model_name'} = main::cleaner($line[1]);
|
|
$cpu{'model_name'} = cpu_cleaner($cpu{'model'});
|
|
#print "p2b:\n";
|
|
}
|
|
$b_first = 1;
|
|
}
|
|
}
|
|
elsif (!$cpu{'family'} &&
|
|
($line[0] eq 'architecture' || $line[0] eq 'cpu family' || $line[0] eq 'cpu architecture' )){
|
|
if ($line[1] =~ /^\d+$/){
|
|
# translate integers to hex
|
|
$cpu{'family'} = uc(sprintf("%x", $line[1]));
|
|
}
|
|
elsif ($b_arm) {
|
|
$cpu{'arch'} = $line[1];
|
|
}
|
|
}
|
|
elsif (!$cpu{'rev'} && ($line[0] eq 'stepping' || $line[0] eq 'cpu revision' )){
|
|
$cpu{'rev'} = $line[1];
|
|
}
|
|
# this is hex so uc for cpu arch id
|
|
elsif (!$cpu{'model_id'} && $line[0] eq 'model' ){
|
|
$cpu{'model_id'} = uc(sprintf("%x", $line[1]));
|
|
}
|
|
elsif (!$cpu{'model_id'} && $line[0] eq 'cpu variant' ){
|
|
$cpu{'model_id'} = uc($line[1]);
|
|
$cpu{'model_id'} =~ s/^0X//;
|
|
}
|
|
# cpu can show in arm
|
|
elsif (!$cpu{'model_name'} &&( $line[0] eq 'model name' || $line[0] eq 'cpu' )){
|
|
$cpu{'model_name'} = main::cleaner($line[1]);
|
|
$cpu{'model_name'} = cpu_cleaner($cpu{'model_name'});
|
|
if ( $b_arm || $line[1] =~ /ARM|AArch/i){
|
|
$b_arm = 1;
|
|
$cpu{'type'} = 'arm';
|
|
if ($cpu{'model_name'} && $cpu{'model_name'} =~ /(.*)\srev\s([\S]+)\s(\(([\S]+)\))?/){
|
|
$cpu{'model_name'} = $1;
|
|
$cpu{'rev'} = $2;
|
|
if ($4){
|
|
$cpu{'arch'} = $4;
|
|
$cpu{'model_name'} .= ' ' . $cpu{'arch'} if $cpu{'model_name'} !~ /$cpu{'arch'}/i;
|
|
}
|
|
#$cpu{'processors'}[$proc_count] = 0;
|
|
}
|
|
}
|
|
}
|
|
elsif ( $line[0] eq 'cpu mhz' ){
|
|
$speed = speed_cleaner($line[1]);
|
|
$cpu{'processors'}[$proc_count-1] = $speed;
|
|
#$ids[$phys_id][$die_id] = ([($speed)]);
|
|
}
|
|
elsif (!$cpu{'siblings'} && $line[0] eq 'siblings' ){
|
|
$cpu{'siblings'} = $line[1];
|
|
}
|
|
elsif (!$cpu{'cores'} && $line[0] eq 'cpu cores' ){
|
|
$cpu{'cores'} = $line[1];
|
|
}
|
|
# increment by 1 for every new physical id we see. These are in almost all cases
|
|
# separate cpus, not separate dies within a single cpu body.
|
|
elsif ( $line[0] eq 'physical id' ){
|
|
if ( !defined $phys_holder || $phys_holder != $line[1] ){
|
|
# only increment if not in array counter
|
|
push @phys_cpus, $line[1] if ! grep {/$line[1]/} @phys_cpus;
|
|
$phys_holder = $line[1];
|
|
$ids[$phys_holder] = ([]) if ! exists $ids[$phys_holder];
|
|
$ids[$phys_holder][$die_id] = ([]) if ! exists $ids[$phys_holder][$die_id];
|
|
#print "pid: $line[1] ph: $phys_holder did: $die_id\n";
|
|
$die_id = 0;
|
|
#$die_holder = 0;
|
|
}
|
|
}
|
|
elsif ( $line[0] eq 'core id' ){
|
|
#print "ph: $phys_holder did: $die_id l1: $line[1] s: $speed\n";
|
|
# https://www.pcworld.com/article/3214635/components-processors/ryzen-threadripper-review-we-test-amds-monster-cpu.html
|
|
if ($line[1] > 0 ){
|
|
$die_holder = $line[1];
|
|
$core_count++;
|
|
}
|
|
# NOTE: this logic won't work for die detections, unforutnately.
|
|
# ARM uses a different /sys based method, and ryzen relies on math on the cores
|
|
# in process_data
|
|
elsif ($line[1] == 0 && $die_holder > 0 ){
|
|
$die_holder = $line[1];
|
|
$core_count = 0;
|
|
$die_id++ if ($cpu{'type'} ne 'intel' && $cpu{'type'} ne 'amd' );
|
|
}
|
|
$phys_holder = 0 if ! defined $phys_holder;
|
|
$ids[$phys_holder][$die_id][$line[1]] = $speed;
|
|
#print "ph: $phys_holder did: $die_id l1: $line[1] s: $speed\n";
|
|
}
|
|
if (!$cpu{'type'} && $line[0] eq 'vendor_id' ){
|
|
$cpu{'type'} = cpu_vendor($line[1]);
|
|
}
|
|
## this is only for -C full cpu output
|
|
if ( $type eq 'full' ){
|
|
if (!$cpu{'l2-cache'} && $line[0] eq 'cache size'){
|
|
if ($line[1] =~ /(\d+)\sKB$/){
|
|
$cpu{'l2-cache'} = $1;
|
|
}
|
|
elsif ($line[1] =~ /(\d+)\sMB$/){
|
|
$cpu{'l2-cache'} = ($1*1024);
|
|
}
|
|
}
|
|
if (!$cpu{'flags'} && ($line[0] eq 'flags' || $line[0] eq 'features' )){
|
|
$cpu{'flags'} = $line[1];
|
|
}
|
|
}
|
|
if ( $extra > 0 && $type eq 'full' ){
|
|
if ($line[0] eq 'bogomips'){
|
|
# new arm shows bad bogomip value, so don't use it
|
|
$cpu{'bogomips'} += $line[1] if $line[1] > 50;
|
|
}
|
|
}
|
|
}
|
|
$cpu{'phys'} = scalar @phys_cpus;
|
|
$cpu{'dies'} = $die_id++; # count starts at 0, all cpus have 1 die at least
|
|
if ($b_arm && $cpu{'dies'} <= 1){
|
|
my $arm_dies = cpu_dies_sys();
|
|
# case were 4 core arm returned 4 sibling lists, obviously wrong
|
|
$cpu{'dies'} = $arm_dies if $arm_dies && $proc_count != $arm_dies;
|
|
}
|
|
$cpu{'type'} = 'arm' if $b_arm && !$cpu{'type'};
|
|
$cpu{'ids'} = (\@ids);
|
|
if ( $extra > 0 && !$cpu{'arch'} && $type ne 'short' ){
|
|
$cpu{'arch'} = cpu_arch($cpu{'type'},$cpu{'family'},$cpu{'model_id'});
|
|
#print "$cpu{'type'},$cpu{'family'},$cpu{'model_id'},$cpu{'arch'}\n";
|
|
}
|
|
if (!$speeds{'cur-freq'}){
|
|
$cpu{'cur-freq'} = $cpu{'processors'}[0];
|
|
$speeds{'min-freq'} = 0;
|
|
$speeds{'max-freq'} = 0;
|
|
}
|
|
else {
|
|
$cpu{'cur-freq'} = $speeds{'cur-freq'};
|
|
$cpu{'min-freq'} = $speeds{'min-freq'};
|
|
$cpu{'max-freq'} = $speeds{'max-freq'};
|
|
}
|
|
main::log_data('dump','%cpu',\%cpu) if $b_log;
|
|
print Data::Dumper::Dumper \%cpu if $test[8];
|
|
eval $end if $b_log;
|
|
return %cpu;
|
|
}
|
|
|
|
sub data_sysctl {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my %cpu = set_cpu_data();
|
|
my (@ids,@line,%speeds,@working);
|
|
my ($sep) = ('');
|
|
my ($cache,$die_holder,$die_id,$phys_holder,$phys_id,$proc_count,$speed) = (0,0,0,0,0,0,0);
|
|
foreach (@sysctl){
|
|
@line = split /\s*:\s*/, $_;
|
|
next if ! $line[0];
|
|
# darwin shows machine, like MacBook7,1, not cpu
|
|
# machdep.cpu.brand_string: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz
|
|
if ( ($bsd_type ne 'darwin' && $line[0] eq 'hw.model' ) || $line[0] eq 'machdep.cpu.brand_string' ){
|
|
# cut L2 cache/cpu max speed out of model string, if available
|
|
# openbsd 5.6: AMD Sempron(tm) Processor 3400+ ("AuthenticAMD" 686-class, 256KB L2 cache)
|
|
# freebsd 10: hw.model: AMD Athlon(tm) II X2 245 Processor
|
|
$line[1] = main::cleaner($line[1]);
|
|
$line[1] = cpu_cleaner($line[1]);
|
|
if ( $line[1] =~ /([0-9]+)[\-[:space:]]*([KM]B)\s+L2 cache/) {
|
|
my $multiplier = ($2 eq 'MB') ? 1024: 1;
|
|
$cpu{'l2-cache'} = $1 * $multiplier;
|
|
}
|
|
if ( $line[1] =~ /([^0-9\.][0-9\.]+)[\-[:space:]]*[MG]Hz/) {
|
|
$cpu{'max-freq'} = $1;
|
|
if ($cpu{'max-freq'} =~ /MHz/i) {
|
|
$cpu{'max-freq'} =~ s/[\-[:space:]]*MHz//;
|
|
$cpu{'max-freq'} = speed_cleaner($cpu{'max-freq'},'mhz');
|
|
}
|
|
elsif ($cpu{'max-freq'} =~ /GHz/) {
|
|
$cpu{'max-freq'} =~ s/[\-[:space:]]*GHz//i;
|
|
$cpu{'max-freq'} = $cpu{'max-freq'} / 1000;
|
|
$cpu{'max-freq'} = speed_cleaner($cpu{'max-freq'},'mhz');
|
|
}
|
|
}
|
|
if ( $line[1] =~ /\)$/ ){
|
|
$line[1] =~ s/\s*\(.*\)$//;
|
|
}
|
|
$cpu{'model_name'} = $line[1];
|
|
$cpu{'type'} = cpu_vendor($line[1]);
|
|
}
|
|
# NOTE: hw.l1icachesize: hw.l1dcachesize:
|
|
elsif ($line[0] eq 'hw.l1icachesize') {
|
|
$cpu{'l1-cache'} = $line[1]/1024;
|
|
}
|
|
elsif ($line[0] eq 'hw.l2cachesize') {
|
|
$cpu{'l2-cache'} = $line[1]/1024;
|
|
}
|
|
# this is in mghz in samples
|
|
elsif ($line[0] eq 'hw.clockrate' || $line[0] eq 'hw.cpuspeed') {
|
|
$cpu{'cur-freq'} = $line[1];
|
|
}
|
|
# these are in hz: 2400000000
|
|
elsif ($line[0] eq 'hw.cpufrequency') {
|
|
$cpu{'cur-freq'} = $line[1]/1000000;
|
|
}
|
|
elsif ($line[0] eq 'hw.busfrequency_min') {
|
|
$cpu{'min-freq'} = $line[1]/1000000;
|
|
}
|
|
elsif ($line[0] eq 'hw.busfrequency_max') {
|
|
$cpu{'max-freq'} = $line[1]/1000000;
|
|
}
|
|
elsif ($line[0] eq 'machdep.cpu.vendor') {
|
|
$cpu{'type'} = cpu_vendor($line[1]);
|
|
}
|
|
# darwin only?
|
|
elsif ($line[0] eq 'machdep.cpu.features') {
|
|
$cpu{'flags'} = lc($line[1]);
|
|
}
|
|
elsif ($line[0] eq 'hw.ncpu' ) {
|
|
$cpu{'cores'} = $line[1];
|
|
}
|
|
# Freebsd does some voltage hacking to actually run at lowest listed frequencies.
|
|
# The cpu does not actually support all the speeds output here but works in freebsd.
|
|
elsif ($line[0] eq 'dev.cpu.0.freq_levels') {
|
|
$line[1] =~ s/^\s+|\/[0-9]+|\s+$//g;
|
|
if ( $line[1] =~ /[0-9]+\s+[0-9]+/ ) {
|
|
my @temp = split /\s+/, $line[1];
|
|
$cpu{'max-freq'} = $temp[0];
|
|
$cpu{'min-freq'} = $temp[-1];
|
|
$cpu{'scalings'} = \@temp;
|
|
}
|
|
}
|
|
elsif (!$cpu{'cur-freq'} && $line[0] eq 'dev.cpu.0.freq' ) {
|
|
$cpu{'cur-freq'} = $line[1];
|
|
}
|
|
# the following have only been seen in DragonflyBSD data but thumbs up!
|
|
elsif ($line[0] eq 'hw.cpu_topology.members' ) {
|
|
my @temp = split /\s+/, $line[1];
|
|
my $count = scalar @temp;
|
|
$count-- if $count > 0;
|
|
$cpu{'processors'}[$count] = 0;
|
|
# no way to get per processor speeds yet, so assign 0 to each
|
|
foreach (0 .. $count){
|
|
$cpu{'processors'}[$_] = 0;
|
|
}
|
|
}
|
|
elsif ($line[0] eq 'hw.cpu_topology.cpu1.physical_siblings' ) {
|
|
# string, like: cpu0 cpu1
|
|
my @temp = split /\s+/, $line[1];
|
|
$cpu{'siblings'} = scalar @temp;
|
|
}
|
|
# increment by 1 for every new physical id we see. These are in almost all cases
|
|
# separate cpus, not separate dies within a single cpu body.
|
|
elsif ( $line[0] eq 'hw.cpu_topology.cpu0.physical_id' ){
|
|
if ($phys_holder != $line[1] ){
|
|
$phys_id++;
|
|
$phys_holder = $line[1];
|
|
$ids[$phys_id] = ([(0)]);
|
|
$ids[$phys_id][$die_id] = ([(0)]);
|
|
}
|
|
}
|
|
elsif ( $line[0] eq 'hw.cpu_topology.cpu0.core_id' ){
|
|
if ($line[1] > 0 ){
|
|
$die_holder = $line[1];
|
|
}
|
|
# this handles multi die cpus like 16 core ryzen
|
|
elsif ($line[1] == 0 && $die_holder > 0 ){
|
|
$die_id++ ;
|
|
$die_holder = $line[1];
|
|
}
|
|
$ids[$phys_id][$die_id][$line[1]] = $speed;
|
|
$cpu{'dies'} = $die_id;
|
|
}
|
|
}
|
|
if (!$cpu{'flags'}){
|
|
$cpu{'flags'} = cpu_flags_bsd();
|
|
}
|
|
main::log_data('dump','%cpu',\%cpu) if $b_log;
|
|
print Data::Dumper::Dumper \%cpu if $test[8];
|
|
eval $end if $b_log;
|
|
return %cpu;
|
|
}
|
|
|
|
sub cpu_properties {
|
|
my (%cpu) = @_;
|
|
my ($b_amd_zen,$b_epyc,$b_ht,$b_intel,$b_ryzen,$b_xeon);
|
|
if ($cpu{'type'} ){
|
|
if ($cpu{'type'} eq 'intel'){
|
|
$b_intel = 1;
|
|
$b_xeon = 1 if $cpu{'model_name'} =~ /Xeon/i;
|
|
}
|
|
elsif ($cpu{'type'} eq 'amd' ){
|
|
if ( $cpu{'family'} && $cpu{'family'} eq '17' ) {
|
|
$b_amd_zen = 1;
|
|
if ($cpu{'model_name'} ){
|
|
if ($cpu{'model_name'} =~ /Ryzen/i ){
|
|
$b_ryzen = 1;
|
|
}
|
|
elsif ($cpu{'model_name'} =~ /EPYC/i){
|
|
$b_epyc = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#my @dies = $phys[0][0];
|
|
my $ref = $cpu{'ids'};
|
|
my @phys = @$ref;
|
|
my $phyical_count = 0;
|
|
#my $phyical_count = scalar @phys;
|
|
my @processors;
|
|
my ($speed,$speed_key);
|
|
# handle case where cpu reports say, phys id 0, 2, 4, 6 [yes, seen it]
|
|
foreach (@phys) {
|
|
$phyical_count++ if $_;
|
|
}
|
|
$phyical_count ||= 1; # assume 1 if no id found, as with ARM
|
|
# count unique processors ##
|
|
# note, this fails for intel cpus at times
|
|
$ref = $cpu{'processors'};
|
|
@processors = @$ref;
|
|
#print ref $cpu{'processors'}, "\n";
|
|
my $processors_count = scalar @processors;
|
|
#print "p count:$processors_count\n";
|
|
#print Data::Dumper::Dumper \@processors;
|
|
# $cpu_cores is per physical cpu
|
|
my ($cpu_layout,$cpu_type,$min_max,$min_max_key) = ('','','','');
|
|
my ($cache,$core_count,$cpu_cores,$die_count) = (0,0,0,0);
|
|
foreach my $die_ref ( @phys ){
|
|
next if ! $die_ref;
|
|
my @dies = @$die_ref;
|
|
$core_count = 0;
|
|
$die_count = scalar @dies;
|
|
#$cpu{'dies'} = $die_count;
|
|
foreach my $core_ref (@dies){
|
|
next if ref $core_ref ne 'ARRAY';
|
|
my @cores = @$core_ref;
|
|
$core_count = 0;# reset for each die!!
|
|
# NOTE: the counters can be undefined because the index comes from
|
|
# core id: which can be 0 skip 1 then 2, which leaves index 1 undefined
|
|
# arm cpus do not actually show core id so ignore that counter
|
|
foreach my $id (@cores){
|
|
$core_count++ if defined $id && !$b_arm;
|
|
}
|
|
#print 'cores: ' . $core_count, "\n";
|
|
}
|
|
}
|
|
# this covers potentially cases where ARM cpus have > 1 die
|
|
$cpu{'dies'} = ($b_arm && $die_count <= 1 && $cpu{'dies'} > 1) ? $cpu{'dies'}: $die_count;
|
|
# this is an attempt to fix the amd family 15 bug with reported cores vs actual cores
|
|
# NOTE: amd A6-4400M APU 2 core reports: cores: 1 siblings: 2
|
|
# NOTE: AMD A10-5800K APU 4 core reports: cores: 2 siblings: 4
|
|
if ($cpu{'cores'} && ! $core_count || $cpu{'cores'} >= $core_count){
|
|
$cpu_cores = $cpu{'cores'};
|
|
}
|
|
elsif ($core_count > $cpu{'cores'}){
|
|
$cpu_cores = $core_count;
|
|
}
|
|
#print "cpu-c:$cpu_cores\n";
|
|
#$cpu_cores = $cpu{'cores'};
|
|
# like, intel core duo
|
|
# NOTE: sadly, not all core intel are HT/MT, oh well...
|
|
# xeon may show wrong core / physical id count, if it does, fix it. A xeon
|
|
# may show a repeated core id : 0 which gives a fake num_of_cores=1
|
|
if ($b_intel){
|
|
if ($cpu{'siblings'} && $cpu{'siblings'} > 1 && $cpu{'cores'} && $cpu{'cores'} > 1 ){
|
|
if ( $cpu{'siblings'}/$cpu{'cores'} == 1 ){
|
|
$b_intel = 0;
|
|
$b_ht = 0;
|
|
}
|
|
else {
|
|
$cpu_cores = ($cpu{'siblings'}/2);
|
|
$b_ht = 1;
|
|
}
|
|
}
|
|
}
|
|
# ryzen is made out of blocks of 8 core dies
|
|
elsif ($b_ryzen){
|
|
$cpu_cores = $cpu{'cores'};
|
|
# note: posix ceil isn't present in Perl for some reason, deprecated?
|
|
my $working = $cpu_cores / 8;
|
|
my @temp = split /\./, $working;
|
|
$cpu{'dies'} = ($temp[1] && $temp[1] > 0) ? $temp[0]++ : $temp[0];
|
|
}
|
|
# these always have 4 dies
|
|
elsif ($b_epyc) {
|
|
$cpu_cores = $cpu{'cores'};
|
|
$cpu{'dies'} = 4;
|
|
}
|
|
# final check, override the num of cores value if it clearly is wrong
|
|
# and use the raw core count and synthesize the total instead of real count
|
|
if ( $cpu_cores == 0 && ($cpu{'cores'} * $phyical_count > 1)){
|
|
$cpu_cores = ($cpu{'cores'} * $phyical_count);
|
|
}
|
|
# last check, seeing some intel cpus and vms with intel cpus that do not show any
|
|
# core id data at all, or siblings.
|
|
if ($cpu_cores == 0 && $processors_count > 0){
|
|
$cpu_cores = $processors_count;
|
|
}
|
|
# this happens with BSDs which have very little cpu data available
|
|
if ( $processors_count == 0 && $cpu_cores > 0 ){
|
|
$processors_count = $cpu_cores;
|
|
if ($bsd_type && ($b_ht || $b_amd_zen) && $cpu_cores > 2 ){
|
|
$cpu_cores = $cpu_cores/2;;
|
|
}
|
|
my $count = $processors_count;
|
|
$count-- if $count > 0;
|
|
$cpu{'processors'}[$count] = 0;
|
|
# no way to get per processor speeds yet, so assign 0 to each
|
|
# must be a numeric value. Could use raw speed from core 0, but
|
|
# that would just be a hack.
|
|
foreach (0 .. $count){
|
|
$cpu{'processors'}[$_] = 0;
|
|
}
|
|
}
|
|
# last test to catch some corner cases
|
|
# seen a case where a xeon vm in a dual xeon system actually had 2 cores, no MT
|
|
# so it reported 4 siblings, 2 cores, but actually only had 1 core per virtual cpu
|
|
#print "prc: $processors_count phc: $phyical_count coc: $core_count cpc: $cpu_cores\n";
|
|
if (!$b_arm && $processors_count == $phyical_count*$core_count && $cpu_cores > $core_count){
|
|
$b_ht = 0;
|
|
#$b_xeon = 0;
|
|
$b_intel = 0;
|
|
$cpu_cores = 1;
|
|
$core_count = 1;
|
|
$cpu{'siblings'} = 1;
|
|
}
|
|
#print "pc: $processors_count s: $cpu{'siblings'} cpuc: $cpu_cores corec: $core_count\n";
|
|
# Algorithm:
|
|
# if > 1 processor && processor id (physical id) == core id then Multi threaded (MT)
|
|
# if siblings > 1 && siblings == 2 * num_of_cores ($cpu{'cores'}) then Multi threaded (MT)
|
|
# if > 1 processor && processor id (physical id) != core id then Multi-Core Processors (MCP)
|
|
# if > 1 processor && processor ids (physical id) > 1 then Symmetric Multi Processing (SMP)
|
|
# if = 1 processor then single core/processor Uni-Processor (UP)
|
|
if ( $processors_count > 1 || ( $b_intel && $cpu{'siblings'} > 0 ) ) {
|
|
# non-multicore MT
|
|
if ($processors_count == ($phyical_count * $cpu_cores * 2)){
|
|
#print "mt:1\n";
|
|
$cpu_type .= 'MT';
|
|
}
|
|
# elsif ($b_xeon && $cpu{'siblings'} > 1){
|
|
# #print "mt:2\n";
|
|
# $cpu_type .= 'MT';
|
|
# }
|
|
elsif ($cpu{'siblings'} > 1 && ($cpu{'siblings'} == 2 * $cpu_cores )){
|
|
#print "mt:3\n";
|
|
$cpu_type .= 'MT';
|
|
}
|
|
# non-MT multi-core or MT multi-core
|
|
if ( ($processors_count == $cpu_cores ) || ($phyical_count < $cpu_cores)){
|
|
my $sep = ($cpu_type) ? ' ' : '' ;
|
|
$cpu_type .= $sep . 'MCP';
|
|
}
|
|
# only solidly known > 1 die cpus will use this, ryzen and arm for now
|
|
if ( $cpu{'dies'} > 1 ){
|
|
my $sep = ($cpu_type) ? ' ' : '' ;
|
|
$cpu_type .= $sep . 'MCM';
|
|
}
|
|
# >1 cpu sockets active: Symetric Multi Processing
|
|
if ($phyical_count > 1){
|
|
my $sep = ($cpu_type) ? ' ' : '' ;
|
|
$cpu_type .= $sep . 'SMP';
|
|
}
|
|
}
|
|
else {
|
|
$cpu_type = 'UP';
|
|
}
|
|
if ($phyical_count > 1){
|
|
$cpu_layout = $phyical_count . 'x ';
|
|
}
|
|
$cpu_layout .= count_alpha($cpu_cores) . 'Core';
|
|
$cpu_layout .= ' (' . $cpu{'dies'}. '-Die)' if !$bsd_type && $cpu{'dies'} > 1;
|
|
# the only possible change for bsds is if we can get phys counts in the future
|
|
if ($bsd_type){
|
|
$cache = $cpu{'l2-cache'} * $phyical_count;
|
|
}
|
|
# AMD SOS chips appear to report full L2 cache per core
|
|
elsif ($cpu{'type'} eq 'amd' && ($cpu{'family'} eq '14' || $cpu{'family'} eq '15' || $cpu{'family'} eq '16')){
|
|
$cache = $cpu{'l2-cache'} * $phyical_count;
|
|
}
|
|
elsif ($cpu{'type'} ne 'intel'){
|
|
$cache = $cpu{'l2-cache'} * $cpu_cores * $phyical_count;
|
|
}
|
|
## note: this handles how intel reports L2, total instead of per core like AMD does
|
|
# note that we need to multiply by number of actual cpus here to get true cache size
|
|
else {
|
|
$cache = $cpu{'l2-cache'} * $phyical_count;
|
|
}
|
|
if ($cache > 10000){
|
|
$cache = sprintf("%.01f MiB",$cache/1024); # trim to no decimals?
|
|
}
|
|
elsif ($cache > 0){
|
|
$cache = "$cache KiB";
|
|
}
|
|
if ($cpu{'cur-freq'} && $cpu{'min-freq'} && $cpu{'max-freq'} ){
|
|
$min_max = "$cpu{'min-freq'}/$cpu{'max-freq'} MHz";
|
|
$min_max_key = "min/max";
|
|
$speed_key = ($show{'short'} || $show{'cpu-basic'}) ? 'speed' : 'Speed';
|
|
$speed = "$cpu{'cur-freq'} MHz";
|
|
}
|
|
elsif ($cpu{'cur-freq'} && $cpu{'max-freq'}){
|
|
$min_max = "$cpu{'max-freq'} MHz";
|
|
$min_max_key = "max";
|
|
$speed_key = ($show{'short'} || $show{'cpu-basic'}) ? 'speed' : 'Speed';
|
|
$speed = "$cpu{'cur-freq'} MHz";
|
|
}
|
|
# elsif ($cpu{'cur-freq'} && $cpu{'max-freq'} && $cpu{'cur-freq'} == $cpu{'max-freq'}){
|
|
# $speed_key = ($show{'short'} || $show{'cpu-basic'}) ? 'speed' : 'Speed';
|
|
# $speed = "$cpu{'cur-freq'} MHz (max)";
|
|
# }
|
|
elsif ($cpu{'cur-freq'} && $cpu{'min-freq'}){
|
|
$min_max = "$cpu{'min-freq'} MHz";
|
|
$min_max_key = "min";
|
|
$speed_key = ($show{'short'} || $show{'cpu-basic'}) ? 'speed' : 'Speed';
|
|
$speed = "$cpu{'cur-freq'} MHz";
|
|
}
|
|
elsif ($cpu{'cur-freq'} && !$cpu{'max-freq'}){
|
|
$speed_key = ($show{'short'} || $show{'cpu-basic'}) ? 'speed' : 'Speed';
|
|
$speed = "$cpu{'cur-freq'} MHz";
|
|
}
|
|
|
|
if ( !$bits_sys && !$b_arm && $cpu{'flags'} ){
|
|
$bits_sys = ($cpu{'flags'} =~ /\blm\b/) ? 64 : 32;
|
|
}
|
|
my %cpu_properties = (
|
|
'bits-sys' => $bits_sys,
|
|
'cpu-layout' => $cpu_layout,
|
|
'cpu-type' => $cpu_type,
|
|
'min-max-key' => $min_max_key,
|
|
'min-max' => $min_max,
|
|
'speed-key' => $speed_key,
|
|
'speed' => $speed,
|
|
'l2-cache' => $cache,
|
|
);
|
|
main::log_data('dump','%cpu_properties',\%cpu_properties) if $b_log;
|
|
#print Data::Dumper::Dumper \%cpu;
|
|
#print Data::Dumper::Dumper \%cpu_properties;
|
|
#my $dc = scalar @dies;
|
|
#print 'phys: ' . $pc . ' dies: ' . $dc, "\n";
|
|
eval $end if $b_log;
|
|
return %cpu_properties;
|
|
}
|
|
sub cpu_speeds {
|
|
eval $start if $b_log;
|
|
my (@processors) = @_;
|
|
my (@speeds);
|
|
my @files = main::globber('/sys/devices/system/cpu/cpu*/cpufreq/scaling_cur_freq');
|
|
foreach (@files){
|
|
my $speed = (main::reader($_))[0];
|
|
if ($speed || $speed eq '0'){
|
|
$speed = sprintf "%.0f", $speed/1000;
|
|
push @speeds, $speed;
|
|
}
|
|
}
|
|
if (!@speeds){
|
|
foreach (@processors){
|
|
if ($_ || $_ eq '0'){
|
|
$_ = sprintf "%.0f", $_;
|
|
push @speeds, $_;
|
|
}
|
|
}
|
|
}
|
|
#print join '; ', @speeds, "\n";
|
|
eval $end if $b_log;
|
|
return @speeds;
|
|
}
|
|
sub set_cpu_speeds_sys {
|
|
eval $start if $b_log;
|
|
my (@arm,%speeds);
|
|
my $sys = '/sys/devices/system/cpu/cpufreq/policy0';
|
|
my $sys2 = '/sys/devices/system/cpu/cpu0/cpufreq/';
|
|
my ($cur,$min,$max) = ('scaling_cur_freq','scaling_min_freq','scaling_max_freq');
|
|
if (!-d $sys && -d $sys2){
|
|
$sys = $sys2;
|
|
($cur,$min,$max) = ('scaling_cur_freq','cpuinfo_min_freq','cpuinfo_max_freq');
|
|
}
|
|
if (-d $sys){
|
|
$speeds{'cur-freq'} = (main::reader("$sys/$cur"))[0];
|
|
$speeds{'cur-freq'} = speed_cleaner($speeds{'cur-freq'},'khz');
|
|
$speeds{'min-freq'} = (main::reader("$sys/$min"))[0];
|
|
$speeds{'min-freq'} = speed_cleaner($speeds{'min-freq'},'khz');
|
|
$speeds{'max-freq'} = (main::reader("$sys/$max"))[0];
|
|
$speeds{'max-freq'} = speed_cleaner($speeds{'max-freq'},'khz');
|
|
if ($b_arm){
|
|
@arm = main::globber('/sys/devices/system/cpu/cpufreq/policy*/');
|
|
# there are arm chips with two dies, that run at different min max speeds!!
|
|
# see: https://github.com/smxi/inxi/issues/128.
|
|
# it would be slick to show both die min/max/cur speeds, but this is
|
|
# ok for now.
|
|
if (scalar @arm > 1){
|
|
my ($current,$max,$min) = (0,0,0);
|
|
foreach (@arm){
|
|
$_ =~ s/\/$//; # strip off last slash in case globs have them
|
|
my $max_temp = main::reader("$_/cpuinfo_max_freq");
|
|
$max_temp = speed_cleaner($max_temp,'khz');
|
|
if ($max_temp > $max){
|
|
$max = $max_temp;
|
|
}
|
|
my $min_temp = main::reader("$_/cpuinfo_min_freq");
|
|
$min_temp = speed_cleaner($min_temp,'khz');
|
|
if ($min_temp < $min || $min == 0){
|
|
$max = $min_temp;
|
|
}
|
|
my $cur_temp = main::reader("$_/cpuinfo_max_freq");
|
|
$cur_temp = speed_cleaner($cur_temp,'khz');
|
|
if ($cur_temp > $current){
|
|
$current = $cur_temp;
|
|
}
|
|
}
|
|
$speeds{'cur-freq'} = $current if $current;
|
|
$speeds{'max-freq'} = $max if $max;
|
|
$speeds{'min-freq'} = $min if $min;
|
|
}
|
|
}
|
|
# policy4/cpuinfo_max_freq:["2000000"]
|
|
# policy4/cpuinfo_min_freq:["200000"]
|
|
if ($speeds{'min-freq'} > $speeds{'max-freq'} || $speeds{'min-freq'} == $speeds{'max-freq'}){
|
|
$speeds{'min-freq'} = 0;
|
|
}
|
|
}
|
|
main::log_data('dump','%speeds',\%speeds) if $b_log;
|
|
eval $end if $b_log;
|
|
return %speeds;
|
|
}
|
|
|
|
# right now only using this for ARM cpus, this is not the same in intel/amd
|
|
sub cpu_dies_sys {
|
|
eval $start if $b_log;
|
|
my @data = main::globber('/sys/devices/system/cpu/cpu*/topology/core_siblings_list');
|
|
my (@dies);
|
|
foreach (@data){
|
|
my $siblings = (main::reader($_))[0];
|
|
if (! grep {/$siblings/} @dies){
|
|
push @dies, $siblings;
|
|
}
|
|
}
|
|
my $die_count = scalar @dies;
|
|
eval $end if $b_log;
|
|
return $die_count;
|
|
}
|
|
sub cpu_flags_bsd {
|
|
eval $start if $b_log;
|
|
my ($flags,$sep) = ('','');
|
|
# this will be null if it was not readable
|
|
my $file = main::system_files('dmesg-boot');
|
|
if ( @dmesg_boot){
|
|
foreach (@dmesg_boot){
|
|
if ( /Features/ || ( $bsd_type eq "openbsd" && /^cpu0:\s*[a-z0-9]{2,3}(\s|,)[a-z0-9]{2,3}(\s|,)/i ) ) {
|
|
my @line = split /:\s*/, lc($_);
|
|
# free bsd has to have weird syntax: <....<b23>,<b34>>
|
|
# Features2=0x1e98220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX>
|
|
$line[1] =~ s/^[^<]*<|>[^>]*$//g;
|
|
# then get rid of <b23> stuff
|
|
$line[1] =~ s/<[^>]+>//g;
|
|
# and replace commas with spaces
|
|
$line[1] =~ s/,/ /g;
|
|
$flags .= $sep . $line[1];
|
|
$sep = ' ';
|
|
}
|
|
elsif (/real mem/){
|
|
last;
|
|
}
|
|
}
|
|
if ($flags){
|
|
$flags =~ s/\s+/ /g;
|
|
$flags =~ s/^\s+|\s+$//g;
|
|
}
|
|
}
|
|
else {
|
|
if ( $file && ! -r $file ){
|
|
$flags = main::row_defaults('dmesg-boot-permissions');
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $flags;
|
|
}
|
|
|
|
sub cpu_vendor {
|
|
eval $start if $b_log;
|
|
my ($string) = @_;
|
|
my ($vendor) = ('');
|
|
$string = lc($string);
|
|
if ($string =~ /intel/) {
|
|
$vendor = "intel"
|
|
}
|
|
elsif ($string =~ /amd/){
|
|
$vendor = "amd"
|
|
}
|
|
# via
|
|
elsif ($string =~ /centaur/){
|
|
$vendor = "centaur"
|
|
}
|
|
eval $end if $b_log;
|
|
return $vendor;
|
|
}
|
|
|
|
sub cpu_arch {
|
|
eval $start if $b_log;
|
|
my ($type,$family,$model) = @_;
|
|
my $arch = '';
|
|
# https://en.wikipedia.org/wiki/List_of_AMD_CPU_microarchitectures
|
|
# print "$type;$family;$model\n";
|
|
if ( $type eq 'amd'){
|
|
if ($family eq '4'){
|
|
if ( $model =~ /^(3|7|8|9|A)$/ ) {$arch = 'Am486'}
|
|
elsif ( $model =~ /^(E|F)$/ ) {$arch = 'Am5x86'}
|
|
}
|
|
elsif ($family eq '5'){
|
|
if ( $model =~ /^(0|1|2|3)$/ ) {$arch = 'K5'}
|
|
elsif ( $model =~ /^(6|7)$/ ) {$arch = 'K6'}
|
|
elsif ( $model =~ /^(8)$/ ) {$arch = 'K6-2'}
|
|
elsif ( $model =~ /^(9|D)$/ ) {$arch = 'K6-3'}
|
|
elsif ( $model =~ /^(A)$/ ) {$arch = 'Geode'}
|
|
}
|
|
elsif ($family eq '6'){
|
|
if ( $model =~ /^(1|2)$/ ) {$arch = 'K7'}
|
|
elsif ( $model =~ /^(3|4)$/ ) {$arch = 'K7 Thunderbird'}
|
|
elsif ( $model =~ /^(6|7|8|A)$/ ) {$arch = 'K7 Palomino+'}
|
|
else {$arch = 'K7'}
|
|
}
|
|
elsif ($family eq 'F'){
|
|
if ( $model =~ /^(4|5|7|8|B|C|E|F|14|15|17|18|1B|1C|1F)$/ ) {$arch = 'K8'}
|
|
elsif ( $model =~ /^(21|23|24|25|27|28|2C|2F)$/ ) {$arch = 'K8 rev.E'}
|
|
elsif ( $model =~ /^(41|43|48|4B|4C|4F|5D|5F|68|6B|6C|6F|7C|7F|C1)$/ ) {$arch = 'K8 rev.F+'}
|
|
else {$arch = 'K8'}
|
|
}
|
|
elsif ($family eq '10'){
|
|
if ( $model =~ /^(2|4|5|6|8|9|A)$/ ) {$arch = 'K10'}
|
|
else {$arch = 'K10'}
|
|
}
|
|
elsif ($family eq '11'){
|
|
if ( $model =~ /^(3)$/ ) {$arch = 'Turion X2 Ultra'}
|
|
}
|
|
# might also need cache handling like 14/16
|
|
elsif ($family eq '12'){
|
|
if ( $model =~ /^(1)$/ ) {$arch = 'Fusion'}
|
|
else {$arch = 'Fusion'}
|
|
}
|
|
# SOC, apu
|
|
elsif ($family eq '14'){
|
|
if ( $model =~ /^(1|2)$/ ) {$arch = 'Bobcat'}
|
|
else {$arch = 'Bobcat'}
|
|
}
|
|
elsif ($family eq '15'){
|
|
if ( $model =~ /^(0|1|2|3|4|5|6|7|8|9|A|B|C|D|E|F)$/ ) {$arch = 'Bulldozer'}
|
|
elsif ( $model =~ /^(10|11|12|13|14|15|16|17|18|19|1A|1B|1C|1D|1E|1F)$/ ) {$arch = 'Piledriver'}
|
|
elsif ( $model =~ /^(30|31|32|33|34|35|36|37|38|39|3A|3B|3C|3D|3E|3F)$/ ) {$arch = 'Steamroller'}
|
|
elsif ( $model =~ /^(60|61|62|63|64|65|66|67|68|69|6A|6B|6C|6D|6E|6F|70|71|72|73|74|75|76|77|78|79|7A|7B|7C|7D|7E|7F)$/ ) {$arch = 'Excavator'}
|
|
else {$arch = 'Bulldozer'}
|
|
}
|
|
# SOC, apu
|
|
elsif ($family eq '16'){
|
|
if ( $model =~ /^(0|1|2|3|4|5|6|7|8|9|A|B|C|D|E|F)$/ ) {$arch = 'Jaguar'}
|
|
elsif ( $model =~ /^(30|31|32|33|34|35|36|37|38|39|3A|3B|3C|3D|3E|3F)$/ ) {$arch = 'Puma'}
|
|
else {$arch = 'Jaguar'}
|
|
}
|
|
elsif ($family eq '17'){
|
|
if ( $model =~ /^(1)$/ ) {$arch = 'Zen'}
|
|
else {$arch = 'Zen'}
|
|
}
|
|
}
|
|
elsif ( $type eq 'arm'){
|
|
if ($family ne ''){$arch="ARMv$family";}
|
|
else {$arch='ARM';}
|
|
}
|
|
# aka VIA
|
|
elsif ( $type eq 'centaur'){
|
|
if ($family eq '5'){
|
|
if ( $model =~ /^(4)$/ ) {$arch = 'WinChip C6'}
|
|
elsif ( $model =~ /^(8)$/ ) {$arch = 'WinChip 2'}
|
|
elsif ( $model =~ /^(9)$/ ) {$arch = 'WinChip 3'}
|
|
}
|
|
elsif ($family eq '6'){
|
|
if ( $model =~ /^(6)$/ ) {$arch = 'WinChip-based'}
|
|
elsif ( $model =~ /^(7|8)$/ ) {$arch = 'C3'}
|
|
elsif ( $model =~ /^(9)$/ ) {$arch = 'C3-2'}
|
|
elsif ( $model =~ /^(A|D)$/ ) {$arch = 'C7'}
|
|
elsif ( $model =~ /^(F)$/ ) {$arch = 'Isaiah'}
|
|
}
|
|
}
|
|
elsif ( $type eq 'intel'){
|
|
if ($family eq '4'){
|
|
if ( $model =~ /^(0|1|2|3|4|5|6|7|8|9)$/ ) {$arch = '486'}
|
|
}
|
|
elsif ($family eq '5'){
|
|
if ( $model =~ /^(1|2|3|7)$/ ) {$arch = 'P5'}
|
|
elsif ( $model =~ /^(4|8)$/ ) {$arch = 'P5'} # MMX
|
|
elsif ( $model =~ /^(9)$/ ) {$arch = 'Quark'}
|
|
}
|
|
elsif ($family eq '6'){
|
|
if ( $model =~ /^(1)$/ ) {$arch = 'P6 Pro'}
|
|
elsif ( $model =~ /^(3|5|6)$/ ) {$arch = 'P6 II'}
|
|
elsif ( $model =~ /^(7|8)$/ ) {$arch = 'P6 III'}
|
|
elsif ( $model =~ /^(9)$/ ) {$arch = 'Banias'} # pentium M
|
|
elsif ( $model =~ /^(15)$/ ) {$arch = 'Dothan Tolapai'} # pentium M system on chip
|
|
elsif ( $model =~ /^(D)$/ ) {$arch = 'Dothan'} # Pentium M
|
|
elsif ( $model =~ /^(E)$/ ) {$arch = 'Yonah'}
|
|
elsif ( $model =~ /^(F|16)$/ ) {$arch = 'Conroe'}
|
|
elsif ( $model =~ /^(17|1D)$/ ) {$arch = 'Penryn'}
|
|
elsif ( $model =~ /^(1A|1E|1F|2E|25|2C|2F)$/ ) {$arch = 'Nehalem'}
|
|
elsif ( $model =~ /^(1C|26)$/ ) {$arch = 'Bonnell'}
|
|
elsif ( $model =~ /^(27|35|36)$/ ) {$arch = 'Saltwell'}
|
|
elsif ( $model =~ /^(25|2C|2F)$/ ) {$arch = 'Westmere'}
|
|
elsif ( $model =~ /^(26|27)$/ ) {$arch = 'Bonnell'}
|
|
elsif ( $model =~ /^(2A|2D)$/ ) {$arch = 'Sandy Bridge'}
|
|
elsif ( $model =~ /^(37|4A|4D|5A)$/ ) {$arch = 'Silvermont'}
|
|
elsif ( $model =~ /^(3A|3E)$/ ) {$arch = 'Ivy Bridge'}
|
|
elsif ( $model =~ /^(3C|3F|45|46)$/ ) {$arch = 'Haswell'}
|
|
elsif ( $model =~ /^(3D|47|4F|56)$/ ) {$arch = 'Broadwell'}
|
|
elsif ( $model =~ /^(4E|55|9E)$/ ) {$arch = 'Skylake'}
|
|
elsif ( $model =~ /^(5E)$/ ) {$arch = 'Skylake-S'}
|
|
elsif ( $model =~ /^(4C|5D)$/ ) {$arch = 'Airmont'}
|
|
elsif ( $model =~ /^(8E|9E)$/ ) {$arch = 'Kaby Lake'}
|
|
elsif ( $model =~ /^(57)$/ ) {$arch = 'Knights Landing'}
|
|
elsif ( $model =~ /^(85)$/ ) {$arch = 'Knights Mill'}
|
|
# product codes: https://en.wikipedia.org/wiki/List_of_Intel_microprocessors
|
|
# coming: coffee lake; cannonlake; icelake; tigerlake
|
|
}
|
|
elsif ($family eq 'B'){
|
|
if ( $model =~ /^(1)$/ ) {$arch = 'Knights Corne'}
|
|
}
|
|
elsif ($family eq 'F'){
|
|
if ( $model =~ /^(0|1|2)$/ ) {$arch = 'Netburst Willamette'}
|
|
elsif ( $model =~ /^(3|4|6)$/ ) {$arch = 'Netburst Prescott'} # Nocona
|
|
else {$arch = 'Netburst'}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $arch;
|
|
}
|
|
|
|
sub count_alpha {
|
|
my ($count) = @_;
|
|
#print "$count\n";
|
|
my @alpha = qw(Single Dual Triple Quad);
|
|
if ($count > 4){
|
|
$count .= '-';
|
|
}
|
|
else {
|
|
$count = $alpha[$count-1] . ' ' if $count > 0;
|
|
}
|
|
return $count;
|
|
}
|
|
sub set_cpu_data {
|
|
my %cpu = (
|
|
'arch' => '',
|
|
'bogomips' => 0,
|
|
'cores' => 0,
|
|
'cur-freq' => 0,
|
|
'dies' => 0,
|
|
'family' => '',
|
|
'flags' => '',
|
|
'ids' => [],
|
|
'l1-cache' => 0, # store in KB
|
|
'l2-cache' => 0, # store in KB
|
|
'l3-cache' => 0, # store in KB
|
|
'max-freq' => 0,
|
|
'min-freq' => 0,
|
|
'model_id' => '',
|
|
'model_name' => '',
|
|
'processors' => [],
|
|
'rev' => '',
|
|
'scalings' => [],
|
|
'siblings' => 0,
|
|
'type' => '',
|
|
);
|
|
return %cpu;
|
|
}
|
|
# MHZ - cell cpus
|
|
sub speed_cleaner {
|
|
my ($speed,$opt) = @_;
|
|
return if ! $speed || $speed eq '0';
|
|
$speed =~ s/[GMK]HZ$//gi;
|
|
$speed = ($speed/1000) if $opt && $opt eq 'khz';
|
|
$speed = sprintf "%.0f", $speed;
|
|
return $speed;
|
|
}
|
|
sub cpu_cleaner {
|
|
my ($cpu) = @_;
|
|
return if ! $cpu;
|
|
my $filters = '@|cpu |cpu deca|([0-9]+|single|dual|two|triple|three|tri|quad|four|';
|
|
$filters .= 'penta|five|hepta|six|hexa|seven|octa|eight|multi)[ -]core|';
|
|
$filters .= 'ennea|genuine|multi|processor|single|triple|[0-9\.]+ *[MmGg][Hh][Zz]';
|
|
$cpu =~ s/$filters//ig;
|
|
$cpu =~ s/\s\s+/ /g;
|
|
$cpu =~ s/^\s+|\s+$//g;
|
|
return $cpu;
|
|
}
|
|
}
|
|
|
|
## DiskData
|
|
{
|
|
package DiskData;
|
|
my ($b_hddtemp,$b_nvme);
|
|
my ($hddtemp,$nvme) = ('','');
|
|
my (@by_id,@by_path);
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,$key1,$val1);
|
|
my ($type) = @_;
|
|
$type ||= 'standard';
|
|
my $num = 0;
|
|
@data = disk_data($type);
|
|
# NOTE:
|
|
if (@data){
|
|
if ($type eq 'standard'){
|
|
@data = create_output(@data);
|
|
@rows = (@rows,@data);
|
|
if ( $bsd_type && !@dm_boot_disk && $type eq 'standard' && $show{'disk'} ){
|
|
$key1 = 'Drive Report';
|
|
my $file = main::system_files('dmesg-boot');
|
|
if ( $file && ! -r $file){
|
|
$val1 = main::row_defaults('dmesg-boot-permissions');
|
|
}
|
|
elsif (!$file){
|
|
$val1 = main::row_defaults('dmesg-boot-missing');
|
|
}
|
|
else {
|
|
$val1 = main::row_defaults('disk-data-bsd');
|
|
}
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
else {
|
|
@rows = @data;
|
|
# print Data::Dumper::Dumper \@rows;
|
|
}
|
|
}
|
|
else {
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('disk-data');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
if (!@rows){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('disk-data');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
#@rows = (@rows,@data);
|
|
@data = ();
|
|
if ($show{'optical'} || $show{'optical-basic'}){
|
|
@data = OpticalData::get();
|
|
@rows = (@rows,@data);
|
|
}
|
|
($b_hddtemp,$b_nvme,$hddtemp,$nvme) = (undef,undef,undef,undef);
|
|
(@by_id,@by_path) = (undef,undef);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (@disks) = @_;
|
|
#print Data::Dumper::Dumper \@disks;
|
|
my (@data,@rows);
|
|
my ($num,$j) = (0,0);
|
|
my ($id,$model,$size,$used,$percent,$size_holder,$used_holder) = ('','','','','','','');
|
|
my @sizing = main::get_size($disks[0]{'size'}) if $disks[0]{'size'};
|
|
#print Data::Dumper::Dumper \@disks;
|
|
if (@sizing){
|
|
$size = $sizing[0];
|
|
# note: if a string is returned there will be no Size unit so just use string.
|
|
if (defined $sizing[0] && $sizing[1]){
|
|
$size .= ' ' . $sizing[1];
|
|
}
|
|
}
|
|
$size ||= 'N/A';
|
|
@sizing = main::get_size($disks[0]{'used'}) if $disks[0]{'used'};
|
|
if (@sizing){
|
|
$used = $sizing[0];
|
|
if (defined $sizing[0] && $sizing[1]){
|
|
$used .= ' ' . $sizing[1];
|
|
if (( $disks[0]{'size'} && $disks[0]{'size'} =~ /^[0-9]/ ) &&
|
|
( $disks[0]{'used'} =~ /^[0-9]/ ) ){
|
|
$used = $used . ' (' . sprintf("%0.1f", $disks[0]{'used'}/$disks[0]{'size'}*100) . '%)';
|
|
}
|
|
}
|
|
}
|
|
$used ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,'HDD Total Size') => $size,
|
|
main::key($num++,'used') => $used,
|
|
});
|
|
@rows = (@rows,@data);
|
|
shift @disks;
|
|
if ( $show{'disk'} && @disks){
|
|
@disks = sort { $a->{'id'} cmp $b->{'id'} } @disks;
|
|
foreach my $ref (@disks){
|
|
($id,$model,$size) = ('','','');
|
|
my %row = %$ref;
|
|
$num = 1;
|
|
$model = ($row{'model'}) ? $row{'model'}: 'N/A';
|
|
$id = ($row{'id'}) ? "/dev/$row{'id'}":'N/A';
|
|
my @sizing = main::get_size($row{'size'});
|
|
#print Data::Dumper::Dumper \@disks;
|
|
if (@sizing){
|
|
$size = $sizing[0];
|
|
# note: if a string is returned there will be no Size unit so just use string.
|
|
if (defined $sizing[0] && $sizing[1]){
|
|
$size .= ' ' . $sizing[1];
|
|
$size_holder = $sizing[0];
|
|
}
|
|
$size ||= 'N/A';
|
|
}
|
|
else {
|
|
$size = 'N/A';
|
|
}
|
|
$j = scalar @rows;
|
|
@data = ({
|
|
main::key($num++,'ID') => $id,
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($row{'type'}){
|
|
$rows[$j]{main::key($num++,'type')} = $row{'type'},
|
|
}
|
|
if ($row{'vendor'}){
|
|
$rows[$j]{main::key($num++,'vendor')} = $row{'vendor'},
|
|
}
|
|
$rows[$j]{main::key($num++,'model')} = $model;
|
|
$rows[$j]{main::key($num++,'size')} = $size;
|
|
if ($extra > 1 && $row{'speed'}){
|
|
$rows[$j]{main::key($num++,'speed')} = $row{'speed'};
|
|
$rows[$j]{main::key($num++,'lanes')} = $row{'lanes'} if $row{'lanes'};
|
|
}
|
|
if ($extra > 1){
|
|
my $serial = main::apply_filter($row{'serial'});
|
|
$rows[$j]{main::key($num++,'serial')} = $serial;
|
|
if ($row{'firmware'}){
|
|
$rows[$j]{main::key($num++,'rev')} = $row{'firmware'};
|
|
}
|
|
}
|
|
if ($extra > 0 && $row{'temp'}){
|
|
$rows[$j]{main::key($num++,'temp')} = $row{'temp'} . ' C';
|
|
}
|
|
# extra level tests already done
|
|
if (defined $row{'partition-table'}){
|
|
$rows[$j]{main::key($num++,'scheme')} = $row{'partition-table'};
|
|
}
|
|
}
|
|
}
|
|
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub disk_data {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my (@rows,@data,@devs);
|
|
my $num = 0;
|
|
my ($used) = (0);
|
|
PartitionData::partition_data() if !$b_partitions;
|
|
foreach my $ref (@partitions){
|
|
my %row = %$ref;
|
|
# don't count remote used, also, some cases mount
|
|
# panfs is parallel NAS volume manager, need more data
|
|
next if ($row{'fs'} && $row{'fs'} =~ /nfs|panfs|sshfs|smbfs|unionfs/);
|
|
# in some cases, like redhat, mounted cdrom/dvds show up in partition data
|
|
next if ($row{'dev-base'} && $row{'dev-base'} =~ /^sr[0-9]+$/);
|
|
# this is used for specific cases where bind, or incorrect multiple mounts
|
|
# to same partitions, or btrfs sub volume mounts, is present. The value is
|
|
# searched for an earlier appearance of that partition and if it is present,
|
|
# the data is not added into the partition used size.
|
|
if ( $row{'dev-base'} !~ /^\/\/|:\// && ! (grep {/$row{'dev-base'}/} @devs) ){
|
|
$used += $row{'used'} if $row{'used'};
|
|
push @devs, $row{'dev-base'};
|
|
}
|
|
}
|
|
if (!$bsd_type && (my $file = main::system_files('partitions'))){
|
|
@data = proc_data($used,$file);
|
|
}
|
|
elsif ($bsd_type) {
|
|
@data = dmesg_boot_data($used);
|
|
}
|
|
#print Data::Dumper::Dumper \@data;
|
|
main::log_data('data',"used: $used") if $b_log;
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
sub proc_data {
|
|
eval $start if $b_log;
|
|
my ($used,$file) = @_;
|
|
my (@data,@drives);
|
|
my ($b_hdx,$size,$drive_size) = (0,0,0);
|
|
my @proc_partitions = main::reader($file,'strip');
|
|
shift @proc_partitions;
|
|
foreach (@proc_partitions){
|
|
next if (/^\s*$/);
|
|
my @row = split /\s+/, $_;
|
|
if ( $row[-1] =~ /^([hsv]d[a-z]+|(ada|mmcblk|n[b]?d|nvme[0-9]+n)[0-9]+)$/) {
|
|
$drive_size = $row[2];
|
|
$b_hdx = 1 if $row[-1] =~ /^hd[a-z]/;
|
|
@data = ({
|
|
'firmware' => '',
|
|
'id' => $row[-1],
|
|
'model' => '',
|
|
'serial' => '',
|
|
'size' => $drive_size,
|
|
'spec' => '',
|
|
'speed' => '',
|
|
'temp' => '',
|
|
'type' => '',
|
|
'vendor' => '',
|
|
});
|
|
@drives = (@drives,@data);
|
|
}
|
|
# See http://lanana.org/docs/device-list/devices-2.6+.txt for major numbers used below
|
|
# See https://www.mjmwired.net/kernel/Documentation/devices.txt for kernel 4.x device numbers
|
|
# if ( $row[0] =~ /^(3|22|33|8)$/ && $row[1] % 16 == 0 ) {
|
|
# $size += $row[2];
|
|
# }
|
|
# special case from this data: 8 0 156290904 sda
|
|
# 43 0 48828124 nbd0
|
|
# note: known starters: vm: 252/253/254; grsec: 202; nvme: 259 mmcblk: 179
|
|
if ( $row[0] =~ /^(3|8|22|33|43|179|202|252|253|254|259)$/ &&
|
|
$row[-1] =~ /(mmcblk[0-9]+|n[b]?d[0-9]+|nvme[0-9]+n[0-9]+|[hsv]d[a-z]+)$/ &&
|
|
( $row[1] % 16 == 0 || $row[1] % 16 == 8 ) ) {
|
|
$size += $row[2];
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \@drives;
|
|
main::log_data('data',"size: $size") if $b_log;
|
|
@data = ({
|
|
'size' => $size,
|
|
'used' => $used,
|
|
});
|
|
#print Data::Dumper::Dumper \@data;
|
|
if ( $show{'disk'} ){
|
|
@drives = (@data,@drives);
|
|
# print 'drives:', Data::Dumper::Dumper \@drives;
|
|
@data = proc_data_advanced($b_hdx,@drives);
|
|
}
|
|
main::log_data('dump','@data',\@data) if $b_log;
|
|
# print Data::Dumper::Dumper \@data;
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
sub proc_data_advanced {
|
|
eval $start if $b_log;
|
|
my ($b_hdx,@drives) = @_;
|
|
my ($i) = (0);
|
|
my (@data,@disk_data,@rows,@scsi,@temp,@working);
|
|
my ($pt_cmd) = ('unset');
|
|
my ($block_type,$file,$firmware,$model,$path,$partition_scheme,
|
|
$serial,$vendor,$working_path);
|
|
@by_id = main::globber('/dev/disk/by-id/*');
|
|
# these do not contain any useful data, no serial or model name
|
|
# wwn-0x50014ee25fb50fc1 and nvme-eui.0025385b71b07e2e
|
|
# scsi-SATA_ST980815A_ simply repeats ata-ST980815A_; same with scsi-0ATA_WDC_WD5000L31X
|
|
# we also don't need the partition items
|
|
my $pattern = '^\/dev\/disk\/by-id\/(md-|lvm-|dm-|wwn-|nvme-eui|raid-|scsi-([0-9]ATA|SATA))|-part[0-9]+$';
|
|
@by_id = grep {!/$pattern/} @by_id if @by_id;
|
|
# print join "\n", @by_id, "\n";
|
|
@by_path = main::globber('/dev/disk/by-path/*');
|
|
## check for all ide type drives, non libata, only do it if hdx is in array
|
|
## this is now being updated for new /sys type paths, this may handle that ok too
|
|
## skip the first rows in the loops since that's the basic size/used data
|
|
if ($b_hdx){
|
|
for ($i = 1; $i < scalar @drives; $i++){
|
|
$file = "/proc/ide/$drives[$i]{'id'}/model";
|
|
if ( $drives[$i]{'id'} =~ /^hd[a-z]/ && -e $file){
|
|
$model = (main::reader($file,'strip'))[0];
|
|
$drives[$i]{'model'} = $model;
|
|
}
|
|
}
|
|
}
|
|
# scsi stuff
|
|
if ($file = main::system_files('scsi')){
|
|
@scsi = scsi_data($file);
|
|
}
|
|
# print 'drives:', Data::Dumper::Dumper \@drives;
|
|
for ($i = 1; $i < scalar @drives; $i++){
|
|
#next if $drives[$i]{'id'} =~ /^hd[a-z]/;
|
|
($block_type,$firmware,$model,$partition_scheme,
|
|
$serial,$vendor,$working_path) = ('','','','','','','');
|
|
if ($extra > 2){
|
|
@data = partition_scheme($pt_cmd,$drives[$i]{'id'});
|
|
$pt_cmd = $data[0];
|
|
$drives[$i]{'partition-table'} = uc($data[1]) if $data[1];
|
|
}
|
|
#print "$drives[$i]{'id'}\n";
|
|
@disk_data = disk_data_by_id("/dev/$drives[$i]{'id'}");
|
|
main::log_data('dump','@disk_data', \@disk_data) if $b_log;
|
|
if ($drives[$i]{'id'} =~ /[sv]d[a-z]/){
|
|
$block_type = 'sdx';
|
|
$working_path = "/sys/block/$drives[$i]{'id'}/device/";
|
|
}
|
|
elsif ($drives[$i]{'id'} =~ /mmcblk/){
|
|
$block_type = 'mmc';
|
|
$working_path = "/sys/block/$drives[$i]{'id'}/device/";
|
|
}
|
|
elsif ($drives[$i]{'id'} =~ /nvme/){
|
|
$block_type = 'nvme';
|
|
# this results in:
|
|
# /sys/devices/pci0000:00/0000:00:03.2/0000:06:00.0/nvme/nvme0/nvme0n1
|
|
# but we want to go one level down so slice off trailing nvme0n1
|
|
$working_path = Cwd::abs_path("/sys/block/$drives[$i]{'id'}");
|
|
$working_path =~ s/nvme[^\/]*$//;
|
|
}
|
|
main::log_data('data',"working path: $working_path") if $b_log;
|
|
if ($block_type && @scsi && @by_id && ! -e "${working_path}model" && ! -e "${working_path}name"){
|
|
## ok, ok, it's incomprehensible, search /dev/disk/by-id for a line that contains the
|
|
# discovered disk name AND ends with the correct identifier, sdx
|
|
# get rid of whitespace for some drive names and ids, and extra data after - in name
|
|
SCSI:
|
|
foreach my $ref (@scsi){
|
|
my %row = %$ref;
|
|
if ($row{'model'}){
|
|
$row{'model'} = (split /\s*-\s*/,$row{'model'})[0];
|
|
foreach my $id (@by_id){
|
|
if ($id =~ /$row{'model'}/ && "/dev/$drives[$i]{'id'}" eq Cwd::abs_path($id)){
|
|
$drives[$i]{'firmware'} = $row{'firmware'};
|
|
$drives[$i]{'model'} = $row{'model'};
|
|
$drives[$i]{'vendor'} = $row{'vendor'};
|
|
last SCSI;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
# note: an entire class of model names gets truncated by /sys so that should be the last
|
|
# in priority re tests.
|
|
elsif ( (!@disk_data || !$disk_data[0] ) && $block_type){
|
|
# NOTE: while path ${working_path}vendor exists, it contains junk value, like: ATA
|
|
$path = "${working_path}model";
|
|
if ( -e $path){
|
|
$model = (main::reader($path,'strip'))[0];
|
|
if ($model){
|
|
$drives[$i]{'model'} = $model;
|
|
}
|
|
}
|
|
elsif ($block_type eq 'mmc' && -e "${working_path}name"){
|
|
$path = "${working_path}name";
|
|
$model = (main::reader($path,'strip'))[0];
|
|
if ($model){
|
|
$drives[$i]{'model'} = $model;
|
|
}
|
|
}
|
|
}
|
|
if (!$drives[$i]{'model'} && @disk_data){
|
|
$drives[$i]{'model'} = $disk_data[0] if $disk_data[0];
|
|
$drives[$i]{'vendor'} = $disk_data[1] if $disk_data[1];
|
|
}
|
|
# maybe rework logic if find good scsi data example, but for now use this
|
|
elsif ($drives[$i]{'model'} && !$drives[$i]{'vendor'}) {
|
|
$drives[$i]{'model'} = main::disk_cleaner($drives[$i]{'model'});
|
|
my @device_data = device_vendor($drives[$i]{'model'},'');
|
|
$drives[$i]{'model'} = $device_data[1] if $device_data[1];
|
|
$drives[$i]{'vendor'} = $device_data[0] if $device_data[0];
|
|
}
|
|
if ($working_path){
|
|
$path = "${working_path}removable";
|
|
$drives[$i]{'type'} = 'Removable' if -e $path && (main::reader($path,'strip'))[0]; # 0/1 value
|
|
}
|
|
my $peripheral = peripheral_data($drives[$i]{'id'});
|
|
# note: we only want to update type if we found a peripheral, otherwise preserve value
|
|
$drives[$i]{'type'} = $peripheral if $peripheral;
|
|
# print "type:$drives[$i]{'type'}\n";
|
|
if ($extra > 0){
|
|
$drives[$i]{'temp'} = hdd_temp("/dev/$drives[$i]{'id'}");
|
|
if ($extra > 1){
|
|
my @speed_data = device_speed($drives[$i]{'id'});
|
|
$drives[$i]{'speed'} = $speed_data[0] if $speed_data[0];
|
|
$drives[$i]{'lanes'} = $speed_data[1] if $speed_data[1];
|
|
if (@disk_data && $disk_data[2]){
|
|
$drives[$i]{'serial'} = $disk_data[2];
|
|
}
|
|
else {
|
|
$path = "${working_path}serial";
|
|
if ( -e $path){
|
|
$serial = (main::reader($path,'strip'))[0];
|
|
$drives[$i]{'serial'} = $serial if $serial;
|
|
}
|
|
}
|
|
if ($extra > 2 && !$drives[$i]{'firmware'} ){
|
|
my @fm = ('rev','fmrev','firmware_rev'); # 0 ~ default; 1 ~ mmc; 2 ~ nvme
|
|
foreach my $firmware (@fm){
|
|
$path = "${working_path}$firmware";
|
|
if ( -e $path){
|
|
$drives[$i]{'firmware'} = (main::reader($path,'strip'))[0];
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \@drives;
|
|
eval $end if $b_log;
|
|
return @drives;
|
|
}
|
|
# camcontrol identify <device> |grep ^serial (this might be (S)ATA specific)
|
|
# smartcl -i <device> |grep ^Serial
|
|
# see smartctl; camcontrol devlist; gptid status;
|
|
sub dmesg_boot_data {
|
|
eval $start if $b_log;
|
|
my ($used) = @_;
|
|
my (@data,@drives,@temp);
|
|
my ($id_holder,$i,$size,$working) = ('',0,0,0);
|
|
my $file = main::system_files('dmesg-boot');
|
|
if (@dm_boot_disk){
|
|
foreach (@dm_boot_disk){
|
|
my @row = split /:\s*/, $_;
|
|
next if ! defined $row[1];
|
|
if ($id_holder ne $row[0]){
|
|
$i++ if $id_holder;
|
|
# print "$i $id_holder $row[0]\n";
|
|
$id_holder = $row[0];
|
|
}
|
|
# no dots, note: ada2: 2861588MB BUT: ada2: 600.000MB/s
|
|
if (! exists $drives[$i]){
|
|
$drives[$i] = ({});
|
|
$drives[$i]{'id'} = $row[0];
|
|
$drives[$i]{'firmware'} = '';
|
|
$drives[$i]{'temp'} = '';
|
|
$drives[$i]{'type'} = '';
|
|
$drives[$i]{'vendor'} = '';
|
|
}
|
|
#print "$i\n";
|
|
if ($bsd_type eq 'openbsd'){
|
|
if ($row[1] =~ /,\s*([0-9\.]+[MGTPE][B]?),.*\ssectors$|^</){
|
|
$working = main::translate_size($1);
|
|
$size += $working if $working;
|
|
$drives[$i]{'size'} = $working;
|
|
}
|
|
if ($row[2] && $row[2] =~ /<([^>]+)>/){
|
|
$drives[$i]{'model'} = $1 if $1;
|
|
$drives[$i]{'type'} = 'removable' if $_ =~ /removable$/;
|
|
# <Generic-, Compact Flash, 1.00>
|
|
my $count = ($drives[$i]{'model'} =~ tr/,//);
|
|
if ($count && $count > 1){
|
|
@temp = split /,\s*/, $drives[$i]{'model'};
|
|
$drives[$i]{'model'} = $temp[1];
|
|
}
|
|
}
|
|
# print "openbsd\n";
|
|
}
|
|
else {
|
|
if ($row[1] =~ /^([0-9]+[KMGTPE][B]?)\s/){
|
|
$working = main::translate_size($1);
|
|
$size += $working if $working;
|
|
$drives[$i]{'size'} = $working;
|
|
}
|
|
if ($row[1] =~ /device$|^</){
|
|
$row[1] =~ s/\sdevice$//g;
|
|
$row[1] =~ /<([^>]*)>\s(.*)/;
|
|
$drives[$i]{'model'} = $1 if $1;
|
|
$drives[$i]{'spec'} = $2 if $2;
|
|
}
|
|
if ($row[1] =~ /^Serial\sNumber\s(.*)/){
|
|
$drives[$i]{'serial'} = $1;
|
|
}
|
|
if ($row[1] =~ /^([0-9\.]+[MG][B]?\/s)/){
|
|
$drives[$i]{'speed'} = $1;
|
|
$drives[$i]{'speed'} =~ s/\.[0-9]+// if $drives[$i]{'speed'};
|
|
}
|
|
}
|
|
$drives[$i]{'model'} = main::disk_cleaner($drives[$i]{'model'});
|
|
my @device_data = device_vendor($drives[$i]{'model'},'');
|
|
$drives[$i]{'vendor'} = $device_data[0] if $device_data[0];
|
|
$drives[$i]{'model'} = $device_data[1] if $device_data[1];
|
|
}
|
|
if (!$size){
|
|
$size = main::row_defaults('data-bsd');
|
|
}
|
|
}
|
|
elsif ( $file && ! -r $file ){
|
|
$size = main::row_defaults('dmesg-boot-permissions');
|
|
}
|
|
elsif (!$file ){
|
|
$size = main::row_defaults('dmesg-boot-missing');
|
|
}
|
|
@data = ({
|
|
'size' => $size,
|
|
'used' => $used,
|
|
});
|
|
#main::log_data('dump','@data',\@data) if $b_log;
|
|
if ( $show{'disk'} ){
|
|
@data = (@data,@drives);
|
|
# print 'drives:', Data::Dumper::Dumper \@drives;
|
|
}
|
|
# print Data::Dumper::Dumper \@data;
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
|
|
# check for usb/firewire/[and thunderwire when data found]
|
|
sub peripheral_data {
|
|
eval $start if $b_log;
|
|
my ($id) = @_;
|
|
my ($type) = ('');
|
|
# print "$id here\n";
|
|
if (@by_id){
|
|
foreach (@by_id) {
|
|
if ("/dev/$id" eq Cwd::abs_path($_)){
|
|
#print "$id here\n";
|
|
if (/usb-/i){
|
|
$type = 'USB';
|
|
}
|
|
elsif (/ieee1394--/i){
|
|
$type = 'FireWire';
|
|
}
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
# note: sometimes with wwn- numbering usb does not appear in by-id but it does in by-path
|
|
if (!$type && @by_path){
|
|
foreach (@by_path) {
|
|
if ("/dev/$id" eq Cwd::abs_path($_)){
|
|
if (/usb-/i){
|
|
$type = 'USB';
|
|
}
|
|
elsif (/ieee1394--/i){
|
|
$type = 'FireWire';
|
|
}
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $type;
|
|
}
|
|
sub partition_scheme {
|
|
eval $start if $b_log;
|
|
my ($set_cmd,$id) = @_;
|
|
my ($cmd,$pt,$program,@data,@return);
|
|
if ($set_cmd ne 'unset'){
|
|
$return[0] = $set_cmd;
|
|
}
|
|
else {
|
|
# runs as user, but is SLOW: udisksctl info -b /dev/sda
|
|
# line: org.freedesktop.UDisks2.PartitionTable:
|
|
# Type: dos
|
|
if (!$b_root){
|
|
if ($program = main::check_program('udevadm')){
|
|
$return[0] = "$program info -q property -n ";
|
|
}
|
|
}
|
|
if (!$return[0] && $b_root && -e "/lib/udev/udisks-part-id") {
|
|
$return[0] = "/lib/udev/udisks-part-id /dev/";
|
|
}
|
|
elsif (!$return[0] && $b_root && ($program = main::check_program('fdisk'))) {
|
|
$return[0] = "$program -l /dev/";
|
|
}
|
|
if (!$return[0]) {
|
|
$return[0] = 'na'
|
|
}
|
|
}
|
|
if ($return[0] ne 'na'){
|
|
$cmd = "$return[0]$id 2>&1";
|
|
main::log_data('cmd',$cmd) if $b_log;
|
|
@data = main::grabber($cmd);
|
|
# for pre ~ 2.30 fdisk did not show gpt, but did show gpt scheme error, so
|
|
# if no gpt match, it's dos = mbr
|
|
if ($cmd =~ /fdisk/){
|
|
foreach (@data){
|
|
if (/^WARNING:\s+GPT/){
|
|
$return[1] = 'gpt';
|
|
last;
|
|
}
|
|
elsif (/^Disklabel\stype:\s*(.+)/i){
|
|
$return[1] = $1;
|
|
last;
|
|
}
|
|
}
|
|
$return[1] = 'dos' if !$return[1];
|
|
}
|
|
else {
|
|
$return[1] = main::awk(\@data,'^(UDISKS_PARTITION_TABLE_SCHEME|ID_PART_TABLE_TYPE)',2,'=');
|
|
}
|
|
$return[1] = 'mbr' if $return[1] && $return[1] eq 'dos';
|
|
}
|
|
eval $end if $b_log;
|
|
return @return;
|
|
}
|
|
sub scsi_data {
|
|
eval $start if $b_log;
|
|
my ($file) = @_;
|
|
my @temp = main::reader($file);
|
|
my (@scsi);
|
|
my ($firmware,$model,$vendor) = ('','','');
|
|
foreach (@temp){
|
|
if (/Vendor:\s*(.*)\s+Model:\s*(.*)\s+Rev:\s*(.*)/i){
|
|
$vendor = $1;
|
|
$model = $2;
|
|
$firmware = $3;
|
|
}
|
|
if (/Type:/i){
|
|
if (/Type:\s*Direct-Access/i){
|
|
my @working = ({
|
|
'vendor' => $vendor,
|
|
'model' => $model,
|
|
'firmware' => $firmware,
|
|
});
|
|
@scsi = (@scsi,@working);
|
|
}
|
|
else {
|
|
($firmware,$model,$vendor) = ('','','');
|
|
}
|
|
}
|
|
}
|
|
main::log_data('dump','@scsi', \@scsi) if $b_log;
|
|
eval $end if $b_log;
|
|
return @scsi;
|
|
}
|
|
# @b_id has already been cleaned of partitions, wwn-, nvme-eui
|
|
sub disk_data_by_id {
|
|
eval $start if $b_log;
|
|
my ($device) = @_;
|
|
my ($model,$serial,$vendor) = ('','','');
|
|
my (@disk_data);
|
|
foreach (@by_id){
|
|
if ($device eq Cwd::abs_path($_)){
|
|
my @data = split /_/, $_;
|
|
my @device_data = ();
|
|
last if scalar @data < 2; # scsi-3600508e000000000876995df43efa500
|
|
$serial = pop @data if @data;
|
|
# usb-PNY_USB_3.0_FD_3715202280-0:0
|
|
$serial =~ s/-[0-9]+:[0-9]+$//;
|
|
$model = join ' ', @data;
|
|
# get rid of the ata-|nvme-|mmc- etc
|
|
$model =~ s/^\/dev\/disk\/by-id\/([^-]+-)?//;
|
|
$model = main::disk_cleaner($model);
|
|
@device_data = device_vendor($model,$serial);
|
|
$vendor = $device_data[0] if $device_data[0];
|
|
$model = $device_data[1] if $device_data[1];
|
|
# print $device, '::', Cwd::abs_path($_),'::', $model, '::', $vendor, '::', $serial, "\n";
|
|
(@disk_data) = ($model,$vendor,$serial);
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @disk_data;
|
|
}
|
|
# receives space separated string that may or may not contain vendor data
|
|
sub device_vendor {
|
|
eval $start if $b_log;
|
|
my ($model,$serial) = @_;
|
|
my ($vendor) = ('');
|
|
my (@data);
|
|
return if !$model;
|
|
# 0 - match pattern; 1 - replace pattern; 2 - vendor print; 3 - serial pattern
|
|
# https://elinux.org/RPi_SD_cards
|
|
# https://sd2snes.de/blog/card-list
|
|
# https://www.superbiiz.com # lists by real part numbers
|
|
my @vendors = (
|
|
## These go first because they are the most likely and common ##
|
|
['^INTEL','^INTEL','Intel',''],
|
|
# must come before samsung MU. NOTE: toshiba can have: TOSHIBA_MK6475GSX: mush: MKNSSDCR120GB_
|
|
['^(MKN|Mushkin)','^Mushkin','Mushkin',''], # MKNS
|
|
# MU = Multiple_Flash_Reader too risky: |M[UZ][^L]
|
|
['^(SAMSUNG|MCG[0-9]+GC)','^SAMSUNG','Samsung',''], # maybe ^SM
|
|
['^(ST[^T]|[S]?SEAGATE|X[AFP])','^[S]?SEAGATE','Seagate',''], # real, SSEAGATE Backup+; XP1600HE30002
|
|
['^WD','^(WDC|WD\s)','Western Digital',''],
|
|
## Then better known ones ##
|
|
['^(A-DATA|ADATA)','^(A-DATA|ADATA)','A-Data',''],
|
|
['^ADTRON','^(ADTRON)','Adtron',''],
|
|
['^ASUS','^ASUS','ASUS',''],
|
|
['^ATP','^ATP[\s\-]','ATP',''],
|
|
['^Corsair','^Corsair','Corsair',''],
|
|
['(^Crucial|^CT|-CT|^M4-)','^Crucial','Crucial',''],
|
|
['^(FUJITSU|MP)','^FUJITSU','Fujitsu',''],
|
|
# note: 2012: wdc bought hgst
|
|
['^(Hitachi|HGST|IC|HT|HU)','^Hitachi','Hitachi',''], # HGST HUA
|
|
['^(HP[\s\-])','^HP[\s\-]','HP',''], # vb: VB0250EAVER but clashes with vbox
|
|
['^(KINGSTON|DataTraveler|SMS|SHS|SUV)','^KINGSTON','Kingston',''], # maybe SHS: SHSS37A SKC SUV
|
|
['^(LSD|Lexar)','^Lexar','Lexar',''], # mmc-LEXAR_0xb016546c
|
|
# OCZSSD2-2VTXE120G is OCZ-VERTEX2_3.5
|
|
['^(OCZ|APOC|D2|DEN|DEN|DRSAK|EC188|FTNC|GFGC|MANG|MMOC|NIMC|NIMR|PSIR|TALOS2|TMSC|TRSAK)','^OCZ[\s\-]','OCZ',''],
|
|
['^OWC','^OWC[\s\-]','OWC',''],
|
|
['^Philips','^Philips','Philips',''],
|
|
['^PIONEER','^PIONEER','Pioneer',''],
|
|
['^PNY','^PNY\s','PNY','','^PNY'],
|
|
['^(SanDisk|SDS[S]?[DQ]|SL([0-9]+)G|AFGCE)','^SanDisk','SanDisk',''],
|
|
# note: get rid of: M[DGK] becasue mushkin starts with MK
|
|
['^([S]?TOS|THN)','^[S]?TOSHIBA','Toshiba',''], # scsi-STOSHIBA_STOR.E_EDITION_
|
|
## These go last because they are short and could lead to false ID, or are unlikely ##
|
|
['^Android','^Android','Android',''],
|
|
# must come before AP|Apacer
|
|
['^APPLE','','^APPLE','Apple'],
|
|
['^(AP|Apacer)','^Apacer','Apacer',''],
|
|
['^BUFFALO','^BUFFALO','Buffalo',''],
|
|
['^EXCELSTOR','^EXCELSTOR( TECHNOLOGY)?','Excelstor',''],
|
|
['^Generic','^Generic','Generic',''],
|
|
['^GOODRAM','^GOODRAM','GOODRAM',''],
|
|
# supertalent also has FM: |FM
|
|
['^(G[\.]?SKILL)','^G[\.]?SKILL','G.SKILL',''],
|
|
['^HUAWEI','^HUAWEI','Huawei',''],
|
|
['^(IBM|DT)','^IBM','IBM',''],
|
|
['^Imation','^Imation(\sImation)?','Imation',''], # Imation_ImationFlashDrive
|
|
['^(InnoDisk|Innolite)','^InnoDisk( Corp.)?','InnoDisk',''],
|
|
['^Innostor','^Innostor','Innostor',''],
|
|
['^Intenso','^Intenso','Intenso',''],
|
|
['^(LITE[\-]?ON[\s\-]?IT)','^LITE[\-]?ON[\s\-]?IT','LITE-ON IT',''], # LITEONIT_LSS-24L6G
|
|
['^(LITE[\-]?ON|PH6)','^LITE[\-]?ON','LITE-ON',''], # PH6-CE240-L
|
|
['^M-Systems','^M-Systems','M-Systems',''],
|
|
['^MAXTOR','^MAXTOR','Maxtor',''],
|
|
['^(MT|M5|Micron)','^Micron','Micron',''],
|
|
['^MARVELL','^MARVELL','Marvell',''],
|
|
['^Medion','^Medion','Medion',''],
|
|
['^Motorola','^Motorola','Motorola',''],
|
|
['^(PS[8F]|Patriot)','^Patriot','Patriot',''],
|
|
['^PIX[\s]?JR','^PIX[\s]?JR','Disney',''],
|
|
['^(PLEXTOR|PX-)','^PLEXTOR','Plextor',''],
|
|
['(^Quantum|Fireball)','^Quantum','Quantum',''],
|
|
['^R3','','AMD Radeon',''], # ssd
|
|
['^RENICE','^RENICE','Renice',''],
|
|
['^RIM[\s]','^RIM','RIM',''],
|
|
['^SigmaTel','^SigmaTel','SigmaTel',''],
|
|
['^SPPC','','Silicon Power',''],
|
|
['^(SK HYNIX|SKHYNIX|HFS)','^(SK HYNIX|SKHYNIX)','SK Hynix',''], # HFS128G39TND-N210A
|
|
['^SH','','Smart Modular Tech.',''],
|
|
['^(SMART( Storage Systems)?|TX)','^(SMART( Storage Systems)?)','Smart Storage Systems',''],
|
|
['^(S[FR]-|Sony)','^Sony','Sony',''],
|
|
['^STE[CK]','^STE[CK]','sTec',''], # wd bought this one
|
|
['^STORFLY','^STORFLY','StorFly',''],
|
|
# NOTE: F[MNETU] not reliable, g.skill starts with FM too:
|
|
# Seagate ST skips STT.
|
|
['^(STT)','','Super Talent',''],
|
|
['^(SF|Swissbit)','^Swissbit','Swissbit',''],
|
|
# ['^(SUPERSPEED)','^SUPERSPEED','SuperSpeed',''], # superspeed is a generic term
|
|
['^TANDBERG','^TANDBERG','Tanberg',''],
|
|
['^TEAC','^TEAC','TEAC',''],
|
|
['^(TS|Transcend|JetFlash)','^Transcend','Transcend',''],
|
|
['^TrekStor','^TrekStor','TrekStor',''],
|
|
['^(UG|Unigen)','^Unigen','Unigen',''],
|
|
['^VBOX','','VirtualBox',''],
|
|
['^Verbatim','^Verbatim','Verbatim',''],
|
|
['^VISIONTEK','^VISIONTEK','VisionTek',''],
|
|
['^VMware','^VMware','VMware',''],
|
|
['^(Vseky|Vaseky)','^Vaseky','Vaseky',''], # ata-Vseky_V880_350G_
|
|
);
|
|
foreach my $ref (@vendors){
|
|
my @row = @$ref;
|
|
if ($model =~ /$row[0]/i || ($row[3] && $serial && $serial =~ /$row[3]/)){
|
|
$vendor = $row[2];
|
|
$model =~ s/$row[1]//i if $row[1] && lc($model) ne lc($row[1]);
|
|
$model =~ s/^[\s\-_]+|[\s\-_]+$//g;
|
|
@data = ($vendor,$model);
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
# Normally hddtemp requires root, but you can set user rights in /etc/sudoers.
|
|
# args: $1 - /dev/<disk> to be tested for
|
|
sub hdd_temp {
|
|
eval $start if $b_log;
|
|
my ($device) = @_;
|
|
my ($path) = ('');
|
|
my (@data,$hdd_temp);
|
|
if ($device =~ /nvme/i){
|
|
if (!$b_nvme){
|
|
$b_nvme = 1;
|
|
if ($path = main::check_program('nvme')) {
|
|
$nvme = $path;
|
|
}
|
|
}
|
|
if ($nvme){
|
|
$device =~ s/n[0-9]//;
|
|
@data = main::grabber("$sudo$nvme smart-log $device 2>/dev/null");
|
|
foreach (@data){
|
|
my @row = split /\s*:\s*/, $_;
|
|
# other rows may have: Temperature sensor 1 :
|
|
if ( $row[0] eq 'temperature') {
|
|
$row[1] =~ s/\s*C//;
|
|
$hdd_temp = $row[1];
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
if (!$b_hddtemp){
|
|
$b_hddtemp = 1;
|
|
if ($path = main::check_program('hddtemp')) {
|
|
$hddtemp = $path;
|
|
}
|
|
}
|
|
if ($hddtemp){
|
|
$hdd_temp = (main::grabber("$sudo$hddtemp -nq -u C $device 2>/dev/null"))[0];
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $hdd_temp;
|
|
}
|
|
sub device_speed {
|
|
eval $start if $b_log;
|
|
my ($device) = @_;
|
|
my ($b_nvme,$lanes,$speed,@data);
|
|
my $working = Cwd::abs_path("/sys/class/block/$device");
|
|
#print "$working\n";
|
|
if ($working){
|
|
my ($id);
|
|
# slice out the ata id:
|
|
# /sys/devices/pci0000:00:11.0/ata1/host0/target0:
|
|
if ($working =~ /^.*\/ata([0-9]+)\/.*/){
|
|
$id = $1;
|
|
}
|
|
# /sys/devices/pci0000:00/0000:00:05.0/virtio1/block/vda
|
|
elsif ($working =~ /^.*\/virtio([0-9]+)\/.*/){
|
|
$id = $1;
|
|
}
|
|
# /sys/devices/pci0000:10/0000:10:01.2/0000:13:00.0/nvme/nvme0/nvme0n1
|
|
elsif ($working =~ /^.*\/(nvme[0-9]+)\/.*/){
|
|
$id = $1;
|
|
$b_nvme = 1;
|
|
}
|
|
# do host last because the strings above might have host as well as their search item
|
|
# 0000:00:1f.2/host3/target3: increment by 1 sine ata starts at 1, but host at 0
|
|
elsif ($working =~ /^.*\/host([0-9]+)\/.*/){
|
|
$id = $1 + 1 if defined $1;
|
|
}
|
|
# print "$working $id\n";
|
|
if (defined $id){
|
|
if ($b_nvme){
|
|
$working = "/sys/class/nvme/$id/device/max_link_speed";
|
|
$speed = (main::reader($working))[0] if -f $working;
|
|
if ($speed =~ /([0-9\.]+)\sGT\/s/){
|
|
$speed = $1;
|
|
# pcie1: 2.5 GT/s; pcie2: 5.0 GT/s; pci3: 8 GT/s
|
|
# NOTE: PCIe 3 stopped using the 8b/10b encoding but a sample pcie3 nvme has
|
|
# rated speed of GT/s * .8 anyway. GT/s * (128b/130b)
|
|
$speed = ($speed <= 5 ) ? $speed * .8 : $speed * 128/130;
|
|
$speed = sprintf("%.1f",$speed) if $speed;
|
|
$working = "/sys/class/nvme/$id/device/max_link_width";
|
|
$lanes = (main::reader($working))[0] if -f $working;
|
|
$lanes = 1 if !$lanes;
|
|
# https://www.edn.com/electronics-news/4380071/What-does-GT-s-mean-anyway-
|
|
# https://www.anandtech.com/show/2412/2
|
|
# http://www.tested.com/tech/457440-theoretical-vs-actual-bandwidth-pci-express-and-thunderbolt/
|
|
# PCIe 1,2 use “8b/10b” encoding: eight bits are encoded into a 10-bit symbol
|
|
# PCIe 3,4,5 use "128b/130b" encoding: 128 bits are encoded into a 130 bit symbol
|
|
$speed = ($speed * $lanes) . " Gb/s";
|
|
}
|
|
}
|
|
else {
|
|
$working = "/sys/class/ata_link/link$id/sata_spd";
|
|
$speed = (main::reader($working))[0] if -f $working;
|
|
$speed = main::disk_cleaner($speed) if $speed;
|
|
$speed =~ s/Gbps/Gb\/s/ if $speed;
|
|
}
|
|
}
|
|
}
|
|
@data = ($speed,$lanes);
|
|
#print "$working $speed\n";
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
# gptid/c5e940f1-5ce2-11e6-9eeb-d05099ac4dc2 N/A ada0p1
|
|
sub match_glabel {
|
|
eval $start if $b_log;
|
|
my ($gptid) = @_;
|
|
return if !@glabel || ! $gptid;
|
|
#$gptid =~ s/s[0-9]+$//;
|
|
my ($dev_id) = ('');
|
|
foreach (@glabel){
|
|
my @temp = split /\s+/, $_;
|
|
my $gptid_trimmed = $gptid;
|
|
# slice off s[0-9] from end in case they use slice syntax
|
|
$gptid_trimmed =~ s/s[0-9]+$//;
|
|
if (defined $temp[0] && ($temp[0] eq $gptid || $temp[0] eq $gptid_trimmed ) ){
|
|
$dev_id = $temp[2];
|
|
last;
|
|
}
|
|
}
|
|
$dev_id ||= $gptid; # no match? return full string
|
|
eval $end if $b_log;
|
|
return $dev_id;
|
|
}
|
|
sub set_glabel {
|
|
eval $start if $b_log;
|
|
$b_glabel = 1;
|
|
if (my $path = main::check_program('glabel')){
|
|
@glabel = main::grabber("$path status 2>/dev/null");
|
|
}
|
|
main::log_data('dump','@glabel:with Headers',\@glabel) if $b_log;
|
|
# get rid of first header line
|
|
shift @glabel;
|
|
eval $end if $b_log;
|
|
}
|
|
}
|
|
|
|
## GraphicData
|
|
{
|
|
package GraphicData;
|
|
my $driver = ''; # we need this as a fallback in case no xorg.0.log
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows);
|
|
my $num = 0;
|
|
if ($b_arm){
|
|
my $key = 'ARM';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('arm-pci',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
@data = card_data();
|
|
@rows = (@rows,@data);
|
|
if (!@rows){
|
|
my $key = 'Message';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('pci-card-data',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
@data = display_data();
|
|
@rows = (@rows,@data);
|
|
@data = gl_data();
|
|
@rows = (@rows,@data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# 0 type
|
|
# 1 type_id
|
|
# 2 bus_id
|
|
# 3 sub_id
|
|
# 4 device
|
|
# 5 vendor_id
|
|
# 6 chip_id
|
|
# 7 rev
|
|
# 8 port
|
|
# 9 driver
|
|
# 10 modules
|
|
# not using 3D controller yet, needs research: |3D controller |display controller
|
|
# note: this is strange, but all of these can be either a separate or the same
|
|
# card. However, by comparing bus id, say: 00:02.0 we can determine that the
|
|
# cards are either the same or different. We want only the .0 version as a valid
|
|
# card. .1 would be for example: Display Adapter with bus id x:xx.1, not the right one
|
|
sub card_data {
|
|
eval $start if $b_log;
|
|
my (@rows,@data);
|
|
my ($j,$num) = (0,1);
|
|
foreach (@pci){
|
|
$num = 1;
|
|
my @row = @$_;
|
|
#print "$row[0] $row[3]\n";
|
|
if ($row[3] == 0 && ( $row[0] eq 'vga' || $row[0] eq 'display' || $row[0] eq '3d' ) ){
|
|
#print "$row[0] $row[3]\n";
|
|
$j = scalar @rows;
|
|
$driver = $row[9];
|
|
$driver ||= 'N/A';
|
|
my $card = main::trimmer($row[4]);
|
|
$card = ($card) ? main::pci_cleaner($card,'output') : 'N/A';
|
|
#$card ||= 'N/A';
|
|
# have seen absurdly verbose card descriptions, with non related data etc
|
|
if (length($card) > 85 || $size{'max'} < 110){
|
|
$card = main::pci_long_filter($card);
|
|
}
|
|
@data = (
|
|
{
|
|
main::key($num++,'Card') => $card,
|
|
main::key($num++,'driver') => $driver,
|
|
},
|
|
);
|
|
@rows = (@rows,@data);
|
|
if ($row[9] && !$bsd_type){
|
|
my $version = main::get_module_version($row[9]);
|
|
$version ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'v')} = $version;
|
|
}
|
|
if ($extra > 0){
|
|
$rows[$j]{main::key($num++,'bus ID')} = "$row[2].$row[3]";
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = "$row[5]:$row[6]";
|
|
}
|
|
}
|
|
#print "$row[0]\n";
|
|
}
|
|
#my $ref = $pci[-1];
|
|
#print $$ref[0],"\n";
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub display_data(){
|
|
eval $start if $b_log;
|
|
my (%graphics,@row);
|
|
my @xdpyinfo;
|
|
my $num = 0;
|
|
my ($protocol,$server) = ('','');
|
|
# note: these may not always be set, they won't be out of X, for example
|
|
$protocol = $ENV{'XDG_SESSION_TYPE'} if $ENV{'XDG_SESSION_TYPE'};
|
|
$protocol = $ENV{'WAYLAND_DISPLAY'} if (!$protocol && $ENV{'WAYLAND_DISPLAY'});
|
|
# need to confirm that there's a point to this test, I believe no, fails out of x
|
|
# loginctl also results in the session id
|
|
if (!$protocol && $b_display && $b_force_display){
|
|
if (my $program = main::check_program('loginctl')){
|
|
my $id = '';
|
|
# $id = $ENV{'XDG_SESSION_ID'}; # returns tty session in console
|
|
my @data = main::grabber("$program --no-pager --no-legend 2>/dev/null",'','strip');
|
|
foreach (@data){
|
|
next if /tty[v]?[0-6]$/; # freebsd: ttyv3
|
|
$id = (split /\s+/, $_)[0];
|
|
last; # multiuser? too bad, we'll go for the first one
|
|
}
|
|
if ($id ){
|
|
my $temp = (main::grabber("$program show-session $id -p Type --no-pager --no-legend 2>/dev/null"))[0];
|
|
$temp =~ s/Type=// if $temp;
|
|
# ssh will not show /dev/ttyx so would have passed the first test
|
|
$protocol = $temp if $temp && $temp ne 'tty';
|
|
}
|
|
}
|
|
}
|
|
if ($extra > 1){
|
|
# initial tests, if wayland, it is certainly a compositor
|
|
$protocol = lc($protocol) if $protocol;
|
|
$graphics{'compositor'} = display_compositor($protocol);
|
|
}
|
|
if ( $b_display){
|
|
# X vendor and version detection.
|
|
# new method added since radeon and X.org and the disappearance of
|
|
# <X server name> version : ...etc. Later on, the normal textual version string
|
|
# returned, e.g. like: X.Org version: 6.8.2
|
|
# A failover mechanism is in place: if $version empty, release number parsed instead
|
|
if (my $program = main::check_program('xdpyinfo')){
|
|
my @xdpyinfo = main::grabber("$program $display_opt 2>/dev/null","\n",'strip');
|
|
#@xdpyinfo = map {s/^\s+//;$_} @xdpyinfo if @xdpyinfo;
|
|
#print join "\n",@xdpyinfo, "\n";
|
|
foreach (@xdpyinfo){
|
|
my @working = split /:\s+/, $_;
|
|
next if ( ($graphics{'dimensions'} && $working[0] ne 'dimensions' ) || !$working[0] );
|
|
#print "$_\n";
|
|
if ($working[0] eq 'vendor string'){
|
|
$working[1] =~ s/The\s|\sFoundation//g;
|
|
# some distros, like fedora, report themselves as the xorg vendor,
|
|
# so quick check here to make sure the vendor string includes Xorg in string
|
|
if ($working[1] !~ /x/i){
|
|
$working[1] .= ' X.org';
|
|
}
|
|
$graphics{'vendor'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'version number'){
|
|
$graphics{'version-id'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'vendor release number'){
|
|
$graphics{'vendor-release'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'X.Org version'){
|
|
$graphics{'xorg-version'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'dimensions'){
|
|
$working[1] =~ s/\spixels//;
|
|
$working[1] =~ s/\smillimeters/ mm/;
|
|
if ($graphics{'dimensions'}){
|
|
$graphics{'dimensions'} = ([@{$graphics{'dimensions'}},$working[1]]);
|
|
}
|
|
else {
|
|
$graphics{'dimensions'} = ([$working[1]]);
|
|
}
|
|
}
|
|
}
|
|
#$graphics{'dimensions'} = (\@dimensions);
|
|
# we get a bit more info from xrandr than xdpyinfo, but xrandr fails to handle
|
|
# multiple screens from different video cards
|
|
my $ref = $graphics{'dimensions'};
|
|
if (defined $ref){
|
|
my @screens = @$ref;
|
|
if (scalar @screens == 1){
|
|
if (my $program = main::check_program('xrandr')){
|
|
my @xrandr = main::grabber("$program $display_opt 2>/dev/null",'','strip');
|
|
foreach (@xrandr){
|
|
my @working = split /\s+/,$_;
|
|
# print join "$_\n";
|
|
if ($working[1] =~ /\*/){
|
|
$working[1] =~ s/\*|\+//g;
|
|
$working[1] = sprintf("%.0f",$working[1]);
|
|
$working[1] = ($working[1]) ? "$working[1]Hz" : 'N/A';
|
|
my $screen = "$working[0]~$working[1]";
|
|
if ($graphics{'screens'}){
|
|
$graphics{'screens'} = ([@{$graphics{'screens'}},$screen]);
|
|
}
|
|
else {
|
|
$graphics{'screens'} = ([$screen]);
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$graphics{'tty'} = tty_data();
|
|
}
|
|
}
|
|
else {
|
|
$graphics{'screens'} = ([main::row_defaults('xdpyinfo-missing')]);
|
|
}
|
|
}
|
|
else {
|
|
$graphics{'tty'} = tty_data();
|
|
}
|
|
# this gives better output than the failure last case, which would only show:
|
|
# for example: X.org: 1.9 instead of: X.org: 1.9.0
|
|
$graphics{'version'} = $graphics{'xorg-version'} if $graphics{'xorg-version'};;
|
|
$graphics{'version'} = x_version() if !$graphics{'version'};
|
|
$graphics{'version'} = $graphics{'version-id'} if !$graphics{'version'};
|
|
|
|
undef @xdpyinfo;
|
|
#print Data::Dumper::Dumper \%graphics;
|
|
if (%graphics){
|
|
my $resolution = '';
|
|
my $server_string = '';
|
|
if ($graphics{'vendor'}){
|
|
my $version = ($graphics{'version'}) ? " $graphics{'version'}" : '';
|
|
$server_string = "$graphics{'vendor'}$version";
|
|
}
|
|
elsif ($graphics{'version'}) {
|
|
$server_string = "X.org $graphics{'version'}";
|
|
}
|
|
if ($graphics{'screens'}){
|
|
my $ref = $graphics{'screens'};
|
|
my @screens = @$ref;
|
|
my $sep = '';
|
|
foreach (@screens){
|
|
$resolution .= $sep . $_;
|
|
$sep = ', ';
|
|
}
|
|
}
|
|
my @drivers = x_drivers();
|
|
if (!$protocol && !$server_string && !$graphics{'vendor'} && !@drivers){
|
|
$server_string = main::row_defaults('display-server');
|
|
@row = ({
|
|
main::key($num++,'Display') => '',
|
|
main::key($num++,'server') => $server_string,
|
|
});
|
|
}
|
|
else {
|
|
$server_string ||= 'N/A';
|
|
# note: if no xorg log, and if wayland, there will be no xorg drivers,
|
|
# obviously, so we use the last driver found on the card section in that case.
|
|
# those come from lscpi kernel drivers so there should be no xorg/wayland issues.
|
|
$driver = ($drivers[0]) ? $drivers[0]: $driver;
|
|
@row = ({
|
|
main::key($num++,'Display') => $protocol,
|
|
main::key($num++,'server') => $server_string,
|
|
main::key($num++,'driver') => $driver,
|
|
});
|
|
if ($drivers[2]){
|
|
$row[0]{main::key($num++,'FAILED')} = $drivers[2];
|
|
}
|
|
if ($drivers[1]){
|
|
$row[0]{main::key($num++,'unloaded')} = $drivers[1];
|
|
}
|
|
if ($graphics{'compositor'}){
|
|
$row[0]{main::key($num++,'compositor')} = $graphics{'compositor'};
|
|
}
|
|
}
|
|
if ($resolution){
|
|
$row[0]{main::key($num++,'resolution')} = $resolution;
|
|
}
|
|
else {
|
|
$graphics{'tty'} ||= 'N/A';
|
|
$row[0]{main::key($num++,'tty')} = $graphics{'tty'};
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @row;
|
|
}
|
|
sub gl_data(){
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my (@row,$arg);
|
|
#print ("$b_display : $b_root\n");
|
|
if ( $b_display){
|
|
if (my $program = main::check_program('glxinfo')){
|
|
# NOTE: glxinfo -B is not always available, unforunately
|
|
my @glxinfo = main::grabber("$program $display_opt 2>/dev/null");
|
|
if (!@glxinfo){
|
|
my $type = 'display-console';
|
|
if ($b_root){
|
|
$type = 'display-root-x';
|
|
}
|
|
else {
|
|
$type = 'display-null';
|
|
}
|
|
@row = ({
|
|
main::key($num++,'Message') => main::row_defaults($type),
|
|
});
|
|
return @row;
|
|
}
|
|
#print join "\n",@glxinfo,"\n";
|
|
my $compat_version = '';
|
|
my ($b_compat,@core_profile_version,@direct_render,@renderer,@opengl_version,@working);
|
|
foreach (@glxinfo){
|
|
next if /^\s/;
|
|
if (/^opengl renderer/i){
|
|
@working = split /:\s*/, $_;
|
|
$working[1] = main::cleaner($working[1]);
|
|
# Allow all mesas
|
|
#if ($working[1] =~ /mesa/i){
|
|
#
|
|
#}
|
|
push @renderer, $working[1];
|
|
}
|
|
# dropping all conditions from this test to just show full mesa information
|
|
# there is a user case where not f and mesa apply, atom mobo
|
|
# /opengl version/ && ( f || $2 !~ /mesa/ ) {
|
|
elsif (/^opengl version/i){
|
|
# fglrx started appearing with this extra string, does not appear
|
|
# to communicate anything of value
|
|
@working = split /:\s*/, $_;
|
|
$working[1] =~ s/(Compatibility Profile Context|\(Compatibility Profile\))//;
|
|
$working[1] =~ s/\s\s/ /g;
|
|
$working[1] =~ s/^\s+|\s+$//;
|
|
push @opengl_version, $working[1];
|
|
# note: this is going to be off if ever multi opengl versions appear, never seen one
|
|
@working = split /\s+/, $working[1];
|
|
$compat_version = $working[0];
|
|
}
|
|
elsif (/^opengl core profile version/i){
|
|
# fglrx started appearing with this extra string, does not appear
|
|
# to communicate anything of value
|
|
@working = split /:\s*/, $_;
|
|
$working[1] =~ s/(Compatibility Profile Context|\((Compatibility|Core) Profile\))//;
|
|
$working[1] =~ s/\s\s/ /g;
|
|
$working[1] =~ s/^\s+|\s+$//;
|
|
push @core_profile_version, $working[1];
|
|
}
|
|
elsif (/direct rendering/){
|
|
@working = split /:\s*/, $_;
|
|
push @direct_render, $working[1];
|
|
}
|
|
# if -B was always available, we could skip this, but it is not
|
|
elsif (/GLX Visuals/){
|
|
last;
|
|
}
|
|
}
|
|
my ($direct_render,$renderer,$version) = ('N/A','N/A','N/A');
|
|
$direct_render = join ', ', @direct_render if @direct_render;
|
|
# non free drivers once filtered and cleaned show the same for core and compat
|
|
# but this stopped for some reason at 4.5/4.6 nvidia
|
|
if (@core_profile_version && @opengl_version &&
|
|
join ('', @core_profile_version) ne join( '', @opengl_version) &&
|
|
!(grep {/nvidia/i} @opengl_version ) ){
|
|
@opengl_version = @core_profile_version;
|
|
$b_compat = 1;
|
|
}
|
|
$version = join ', ', @opengl_version if @opengl_version;
|
|
$renderer = join ', ', @renderer if @renderer;
|
|
@row = ({
|
|
main::key($num++,'OpenGL') => '',
|
|
main::key($num++,'renderer') => $renderer,
|
|
main::key($num++,'v') => $version,
|
|
});
|
|
|
|
if ($b_compat && $extra > 1 && $compat_version){
|
|
$row[0]{main::key($num++,'compat-v')} = $compat_version;
|
|
}
|
|
if ($extra > 0){
|
|
$row[0]{main::key($num++,'direct render')} = $direct_render;
|
|
}
|
|
}
|
|
else {
|
|
@row = ({
|
|
main::key($num++,'Message') => main::row_defaults('glxinfo-missing'),
|
|
});
|
|
}
|
|
}
|
|
else {
|
|
my $type = 'display-console';
|
|
if (!main::check_program('glxinfo')){
|
|
$type = 'glxinfo-missing';
|
|
}
|
|
else {
|
|
if ($b_root){
|
|
$type = 'display-root';
|
|
}
|
|
else {
|
|
$type = 'display-try';
|
|
}
|
|
}
|
|
@row = ({
|
|
main::key($num++,'Message') => main::row_defaults($type),
|
|
});
|
|
}
|
|
eval $end if $b_log;
|
|
return @row;
|
|
}
|
|
sub tty_data(){
|
|
eval $start if $b_log;
|
|
my ($tty);
|
|
if ($size{'term-cols'}){
|
|
$tty = "$size{'term-cols'}x$size{'term-lines'}";
|
|
}
|
|
elsif ($b_irc && $client{'console-irc'}){
|
|
my $tty_working = main::get_tty_console_irc();
|
|
if (my $program = main::check_program('stty')){
|
|
my $tty_arg = ($bsd_type) ? '-f' : '-F';
|
|
$tty = (main::grabber("$program $tty_arg /dev/pts/$tty_working size 2>/dev/null"))[0];
|
|
if ($tty){
|
|
my @temp = split /\s+/, $tty;
|
|
$tty = "$temp[1]x$temp[0]";
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $tty;
|
|
}
|
|
sub x_drivers {
|
|
eval $start if $b_log;
|
|
my ($driver,@driver_data,,%drivers);
|
|
my ($failed,$loaded,$sep,$unloaded) = ('','','','');
|
|
if (my $log = main::system_files('xorg-log')){
|
|
my @xorg = main::reader($log);
|
|
# list is from sgfxi plus non-free drivers
|
|
my $list = 'amdgpu|apm|ark|ati|chips|cirrus|cyrix|fbdev|fglrx|glint|';
|
|
$list .= 'i128|i740|i810|iftv|imstt|intel|ivtv|mach64|mesa|mga|modesetting|';
|
|
$list .= 'neomagic|newport|nouveau|nsc|nvidia|nv|openchrome|radeonhd|radeon|';
|
|
$list .= 'rendition|s3virge|s3|savage|siliconmotion|sisimedia|sisusb|sis|tdfx|';
|
|
$list .= 'tga|trident|tseng|unichrome|v4l|vboxvideo|vesa|vga|via|vmware|voodoo';
|
|
# it's much cheaper to grab the simple pattern match then do the expensive one
|
|
# in the main loop.
|
|
#@xorg = grep {/Failed|Unload|Loading/} @xorg;
|
|
foreach (@xorg){
|
|
next if !/Failed|Unload|Loading/;
|
|
# note that in file names, driver is always lower case
|
|
if (/\sLoading.*($list)_drv.so$/i ) {
|
|
$driver=lc($1);
|
|
# we get all the actually loaded drivers first, we will use this to compare the
|
|
# failed/unloaded, which have not always actually been truly loaded
|
|
$drivers{$driver}="loaded";
|
|
}
|
|
# openbsd uses UnloadModule:
|
|
elsif (/(Unloading\s|UnloadModule).*($list)(_drv.so)?$/i ) {
|
|
$driver=lc($2);
|
|
# we get all the actually loaded drivers first, we will use this to compare the
|
|
# failed/unloaded, which have not always actually been truly loaded
|
|
$drivers{$driver}="unloaded" ;
|
|
}
|
|
# verify that the driver actually started the desktop, even with false failed messages
|
|
# which can occur. This is the driver that is actually driving the display
|
|
elsif (/Failed.*($list)\"?(_drv.so)?$/i ) {
|
|
$driver=lc($1);
|
|
# we need to make sure that the driver has already been truly loaded, not just
|
|
# discussed, also set driver to lower case because sometimes it will show as
|
|
# RADEON or NVIDIA in the actual x start
|
|
if (exists $drivers{$driver}){
|
|
$drivers{$driver}="failed";
|
|
}
|
|
}
|
|
}
|
|
my $sep = '';
|
|
foreach (sort keys %drivers){
|
|
if ($drivers{$_} eq 'loaded') {
|
|
$sep = ($loaded) ? ',' : '';
|
|
$loaded .= $sep . $_;
|
|
}
|
|
elsif ($drivers{$_} eq 'unloaded') {
|
|
$sep = ($unloaded) ? ',' : '';
|
|
$unloaded .= $sep . $_;
|
|
}
|
|
elsif ($drivers{$_} eq 'failed') {
|
|
$sep = ($failed) ? ',' : '';
|
|
$failed .= $sep . $_;
|
|
}
|
|
}
|
|
$loaded ||= 'none';
|
|
@driver_data = ($loaded,$unloaded,$failed);
|
|
}
|
|
eval $end if $b_log;
|
|
return @driver_data;
|
|
}
|
|
sub x_version {
|
|
eval $start if $b_log;
|
|
my ($version,@data,$program);
|
|
# IMPORTANT: both commands send version data to stderr!
|
|
if ($program = main::check_program('Xorg')){
|
|
@data = main::grabber("$program -version 2>&1");
|
|
}
|
|
elsif ($program = main::check_program('X')){
|
|
@data = main::grabber("$program -version 2>&1");
|
|
}
|
|
#print Data::Dumper::Dumper \@data;
|
|
if (@data){
|
|
foreach (@data){
|
|
if (/^X.org X server/i){
|
|
my @working = split /\s+/, $_;
|
|
$version = $working[3];
|
|
last;
|
|
}
|
|
elsif (/^X Window System Version/i) {
|
|
my @working = split /\s+/, $_;
|
|
$version = $working[4];
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $version;
|
|
}
|
|
# $1 - protocol: wayland|x11
|
|
sub display_compositor {
|
|
eval $start if $b_log;
|
|
my ($protocol) = @_;
|
|
my ($compositor) = ('');
|
|
# NOTE: chains of greps of ps data are VERY expensive, so check for program presence
|
|
if (main::check_program('mutter') && (grep {/mutter/} @ps_cmd ) ) {
|
|
$compositor = 'mutter';
|
|
}
|
|
elsif (main::check_program('kwin') && (grep {/\bkwin\b/} @ps_cmd ) ) {
|
|
$compositor = 'kwin';
|
|
}
|
|
elsif (main::check_program('muffin') && (grep {/muffin/} @ps_cmd ) ) {
|
|
$compositor = 'muffin';
|
|
}
|
|
# Note: other strings have gnome-shell in them, so important to get exact one. Since we
|
|
# can't fully trust how this will appear, the pattern should tighten it
|
|
elsif (main::check_program('gnome-shell') && (grep {/^(\/[\S]+\/)?gnome-shell(\s|$)/} @ps_cmd ) ) {
|
|
$compositor = 'gnome-shell';
|
|
}
|
|
elsif (main::check_program('weston') && (grep {/weston/} @ps_cmd ) ) {
|
|
$compositor = 'weston';
|
|
}
|
|
elsif (main::check_program('compton') && (grep {/compton/} @ps_cmd ) ) {
|
|
$compositor = 'compton';
|
|
}
|
|
# owned by: compiz-core in debian
|
|
elsif (main::check_program('compiz') && (grep {/compiz/} @ps_cmd ) ) {
|
|
$compositor = 'compiz';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('moblin') && (grep {/moblin/} @ps_cmd ) ) {
|
|
$compositor = 'moblin';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('kmscon') && (grep {/kmscon/} @ps_cmd ) ) {
|
|
$compositor = 'kmscon';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('sway') && (grep {/\bsway\b/} @ps_cmd ) ) {
|
|
$compositor = 'sway';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('grefson') && (grep {/grefson/} @ps_cmd ) ) {
|
|
$compositor = 'grefson';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('westford') && (grep {/westford/} @ps_cmd ) ) {
|
|
$compositor = 'westford';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('rustland') && (grep {/rustland/} @ps_cmd ) ) {
|
|
$compositor = 'rustland';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('ireplace') && (grep {/fireplace/} @ps_cmd ) ) {
|
|
$compositor = 'fireplace';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('wayhouse') && (grep {/wayhouse/} @ps_cmd ) ) {
|
|
$compositor = 'wayhouse';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('swc') && (grep {/\bswc\b/} @ps_cmd ) ) {
|
|
$compositor = 'swc';
|
|
}
|
|
# did not find in debian apt
|
|
elsif (main::check_program('dwc') && (grep {/\bdwc\b/} @ps_cmd ) ) {
|
|
$compositor = 'dwc';
|
|
}
|
|
main::log_data('data',"compositor: $compositor") if $b_log;
|
|
eval $end if $b_log;
|
|
return $compositor;
|
|
}
|
|
}
|
|
|
|
## MachineData
|
|
{
|
|
package MachineData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (%arm_machine,@data,@rows,$key1,$val1,$which);
|
|
my $num = 0;
|
|
if ($bsd_type && @sysctl_machine && !$b_dmidecode_force ){
|
|
@data = machine_data_sysctl();
|
|
if (!@data && !$key1){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('machine-data-force-dmidecode','');
|
|
}
|
|
}
|
|
elsif ($bsd_type || $b_dmidecode_force){
|
|
my $ref = $alerts{'dmidecode'};
|
|
if ( $$ref{'action'} ne 'use'){
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
$key1 = ucfirst($key1);
|
|
}
|
|
else {
|
|
@data = machine_data_dmi();
|
|
if (!@data && !$key1){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('machine-data','');
|
|
}
|
|
}
|
|
}
|
|
elsif (-d '/sys/class/dmi/id/') {
|
|
@data = machine_data_sys();
|
|
if (!@data){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('machine-data-dmidecode','');
|
|
}
|
|
}
|
|
elsif (!$bsd_type) {
|
|
# this uses /proc/cpuinfo so only GNU/Linux
|
|
if ($b_arm){
|
|
%arm_machine = machine_data_arm();
|
|
if (%arm_machine){
|
|
@data = create_output_arm(%arm_machine);
|
|
}
|
|
}
|
|
if (!@data){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('machine-data-force-dmidecode','');
|
|
}
|
|
}
|
|
# if error case, null data, whatever
|
|
if ($key1) {
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
## keys for machine data are:
|
|
# 0-sys_vendor 1-product_name 2-product_version 3-product_serial 4-product_uuid
|
|
# 5-board_vendor 6-board_name 7-board_version 8-board_serial
|
|
# 9-bios_vendor 10-bios_version 11-bios_date
|
|
## with extra data:
|
|
# 12-chassis_vendor 13-chassis_type 14-chassis_version 15-chassis_serial
|
|
## unused: 16-bios_rev 17-bios_romsize 18 - firmware type
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my ($ref) = @_;
|
|
my (%data,@row,@rows);
|
|
%data = %$ref;
|
|
my $firmware = 'BIOS';
|
|
my $num = 0;
|
|
my $j = 0;
|
|
my ($b_chassis,$b_skip_chassis,$b_skip_system);
|
|
my ($bios_date,$bios_rev,$bios_romsize,$bios_vendor,$bios_version,$chassis_serial,
|
|
$chassis_type,$chassis_vendor,$chassis_version, $mobo_model,$mobo_serial,$mobo_vendor,
|
|
$mobo_version,$product_name,$product_serial,$product_version,$system_vendor);
|
|
# foreach my $key (keys %data){
|
|
# print "$key: $data{$key}\n";
|
|
# }
|
|
if (!$data{'sys_vendor'} || ($data{'board_vendor'} &&
|
|
$data{'sys_vendor'} eq $data{'board_vendor'} && !$data{'product_name'} &&
|
|
!$data{'product_version'} && !$data{'product_serial'})){
|
|
$b_skip_system = 1;
|
|
}
|
|
# found a case of battery existing but having nothing in it on desktop mobo
|
|
# not all laptops show the first. /proc/acpi/battery is deprecated.
|
|
elsif ( !glob('/proc/acpi/battery/*') && !glob('/sys/class/power_supply/*') ){
|
|
# ibm / ibm can be true; dell / quantum is false, so in other words, only do this
|
|
# in case where the vendor is the same and the version is the same and not null,
|
|
# otherwise the version information is going to be different in all cases I think
|
|
if ( ($data{'sys_vendor'} && $data{'sys_vendor'} eq $data{'board_vendor'} ) &&
|
|
( ($data{'product_version'} && $data{'product_version'} eq $data{'board_version'} ) ||
|
|
(!$data{'product_version'} && $data{'product_name'} eq $data{'board_name'} ) ) ){
|
|
$b_skip_system = 1;
|
|
}
|
|
}
|
|
$data{'device'} ||= 'N/A';
|
|
$j = scalar @rows;
|
|
@row = ({
|
|
main::key($num++,'Type') => ucfirst($data{'device'}),
|
|
},);
|
|
@rows = (@rows,@row);
|
|
if (!$b_skip_system){
|
|
# this has already been tested for above so we know it's not null
|
|
$system_vendor = main::cleaner($data{'sys_vendor'});
|
|
$product_name = ($data{'product_name'}) ? $data{'product_name'}:'N/A';
|
|
$product_version = ($data{'product_version'}) ? $data{'product_version'}:'N/A';
|
|
$product_serial = main::apply_filter($data{'product_serial'});
|
|
$rows[$j]{main::key($num++,'System')} = $system_vendor;
|
|
$rows[$j]{main::key($num++,'product')} = $product_name;
|
|
$rows[$j]{main::key($num++,'v')} = $product_version;
|
|
$rows[$j]{main::key($num++,'serial')} = $product_serial;
|
|
# no point in showing chassis if system isn't there, it's very unlikely that
|
|
# would be correct
|
|
if ($extra > 1){
|
|
if ($data{'board_version'} && $data{'chassis_version'} eq $data{'board_version'}){
|
|
$b_skip_chassis = 1;
|
|
}
|
|
if (!$b_skip_chassis && $data{'chassis_vendor'} ){
|
|
if ($data{'chassis_vendor'} ne $data{'sys_vendor'} ){
|
|
$chassis_vendor = $data{'chassis_vendor'};
|
|
}
|
|
if ($data{'chassis_type'} ){
|
|
$chassis_type = $data{'chassis_type'};
|
|
}
|
|
if ($data{'chassis_version'}){
|
|
$chassis_version = $data{'chassis_version'};
|
|
$chassis_version =~ s/^v([0-9])/$1/i;
|
|
}
|
|
$chassis_serial = main::apply_filter($data{'chassis_serial'});
|
|
$chassis_vendor ||= '';
|
|
$chassis_type ||= '';
|
|
$rows[$j]{main::key($num++,'Chassis')} = $chassis_vendor;
|
|
if ($chassis_type){
|
|
$rows[$j]{main::key($num++,'type')} = $chassis_type;
|
|
}
|
|
if ($chassis_version){
|
|
$rows[$j]{main::key($num++,'v')} = $chassis_version;
|
|
}
|
|
$rows[$j]{main::key($num++,'serial')} = $chassis_serial;
|
|
}
|
|
}
|
|
$j++; # start new row
|
|
}
|
|
if ($data{'firmware'}){
|
|
$firmware = $data{'firmware'};
|
|
}
|
|
$mobo_vendor = ($data{'board_vendor'}) ? main::cleaner($data{'board_vendor'}) : 'N/A';
|
|
$mobo_model = ($data{'board_name'}) ? $data{'board_name'}: 'N/A';
|
|
$mobo_version = ($data{'board_version'})? $data{'board_version'} : '';
|
|
$mobo_serial = main::apply_filter($data{'board_serial'});
|
|
$bios_vendor = ($data{'bios_vendor'}) ? main::cleaner($data{'bios_vendor'}) : 'N/A';
|
|
if ($data{'bios_version'}){
|
|
$bios_version = $data{'bios_version'};
|
|
$bios_version =~ s/^v([0-9])/$1/i;
|
|
if ($data{'bios_rev'}){
|
|
$bios_rev = $data{'bios_rev'};
|
|
}
|
|
}
|
|
$bios_version ||= 'N/A';
|
|
if ($data{'bios_date'}){
|
|
$bios_date = $data{'bios_date'};
|
|
}
|
|
$bios_date ||= 'N/A';
|
|
if ($extra > 1 && $data{'bios_romsize'}){
|
|
$bios_romsize = $data{'bios_romsize'};
|
|
}
|
|
$rows[$j]{main::key($num++,'Mobo')} = $mobo_vendor;
|
|
$rows[$j]{main::key($num++,'model')} = $mobo_model;
|
|
if ($mobo_version){
|
|
$rows[$j]{main::key($num++,'v')} = $mobo_version;
|
|
}
|
|
$rows[$j]{main::key($num++,'serial')} = $mobo_serial;
|
|
if ($extra > 2 && $data{'board_uuid'}){
|
|
$rows[$j]{main::key($num++,'uuid')} = $data{'board_uuid'};
|
|
}
|
|
$rows[$j]{main::key($num++,$firmware)} = $bios_vendor;
|
|
$rows[$j]{main::key($num++,'v')} = $bios_version;
|
|
if ($bios_rev){
|
|
$rows[$j]{main::key($num++,'rev')} = $bios_rev;
|
|
}
|
|
$rows[$j]{main::key($num++,'date')} = $bios_date;
|
|
if ($bios_romsize){
|
|
$rows[$j]{main::key($num++,'rom size')} = $bios_romsize;
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output_arm {
|
|
my (%data,@row,@rows);
|
|
my (%arm_machine) = @_;
|
|
my $num = 0;
|
|
my $j = 0;
|
|
#print Data::Dumper::Dumper \%arm_machine;
|
|
if ($arm_machine{'device'}){
|
|
my $device = main::cleaner( $arm_machine{'device'} );
|
|
$device ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'Type')} = 'ARM Device';
|
|
$rows[$j]{main::key($num++,'System')} = $device;
|
|
}
|
|
# we're going to print N/A for 0000 values sine the item was there.
|
|
if ($arm_machine{'firmware'}){
|
|
# most samples I've seen are like: 0000
|
|
$arm_machine{'firmware'} =~ s/^[0]+$//;
|
|
$arm_machine{'firmware'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'rev')} = $arm_machine{'firmware'};
|
|
}
|
|
# sometimes has value like: 0000
|
|
if (defined $arm_machine{'serial'}){
|
|
# most samples I've seen are like: 0000
|
|
$arm_machine{'serial'} =~ s/^[0]+$//;
|
|
$rows[$j]{main::key($num++,'serial')} = main::apply_filter($arm_machine{'serial'});
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub machine_data_sys {
|
|
eval $start if $b_log;
|
|
my (%data,$path,$vm);
|
|
my $sys_dir = '/sys/class/dmi/id/';
|
|
my $sys_dir_alt = '/sys/devices/virtual/dmi/id/';
|
|
my @sys_files = qw(bios_vendor bios_version bios_date
|
|
board_name board_serial board_vendor board_version chassis_type
|
|
product_name product_serial product_uuid product_version sys_vendor
|
|
);
|
|
if ($extra > 1){
|
|
splice @sys_files, 0, 0, qw( chassis_serial chassis_vendor chassis_version);
|
|
}
|
|
$data{'firmware'} = 'BIOS';
|
|
# print Data::Dumper::Dumper \@sys_files;
|
|
if (!-d $sys_dir ){
|
|
if ( -d $sys_dir_alt){
|
|
$sys_dir = $sys_dir_alt;
|
|
}
|
|
else {
|
|
return 0;
|
|
}
|
|
}
|
|
if ( -d '/sys/firmware/efi'){
|
|
$data{'firmware'} = 'UEFI';
|
|
}
|
|
elsif ( glob('/sys/firmware/acpi/tables/UEFI*') ){
|
|
$data{'firmware'} = 'UEFI [Legacy]';
|
|
}
|
|
foreach (@sys_files){
|
|
$path = "$sys_dir$_";
|
|
if (-r $path){
|
|
$data{$_} = (main::reader($path))[0];
|
|
$data{$_} = ($data{$_}) ? main::dmi_cleaner($data{$_}) : '';
|
|
}
|
|
elsif (!$b_root && -e $path && !-r $path ){
|
|
$data{$_} = main::row_defaults('root-required');
|
|
}
|
|
else {
|
|
$data{$_} = '';
|
|
}
|
|
}
|
|
if ($data{'chassis_type'}){
|
|
if ( $data{'chassis_type'} == 1){
|
|
$data{'device'} = get_device_vm($data{'sys_vendor'},$data{'product_name'});
|
|
$data{'device'} ||= 'other-vm?';
|
|
}
|
|
else {
|
|
$data{'device'} = get_device_sys($data{'chassis_type'});
|
|
}
|
|
}
|
|
# print "sys:\n";
|
|
# foreach (keys %data){
|
|
# print "$_: $data{$_}\n";
|
|
# }
|
|
main::log_data('dump','%data',\%data) if $b_log;
|
|
my @rows = create_output(\%data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# this will create an alternate machine data source
|
|
# which will be used for alt ARM machine data in cases
|
|
# where no dmi data present, or by cpu data to guess at
|
|
# certain actions for arm only.
|
|
sub machine_data_arm {
|
|
eval $end if $b_log;
|
|
my (%arm_machine,@temp);
|
|
if (my $file = main::system_files('cpuinfo')){
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/cpu/arm/arm-shevaplug-1.2ghz.txt";
|
|
my @data = main::reader($file);
|
|
foreach (@data){
|
|
if (/^Hardware/i){
|
|
@temp = split /\s*:\s*/, $_;
|
|
$arm_machine{'device'} = $temp[1];
|
|
}
|
|
elsif (/^Revision/i){
|
|
@temp = split /\s*:\s*/, $_;
|
|
$arm_machine{'firmware'} = $temp[1];
|
|
}
|
|
elsif (/^Serial/i){
|
|
@temp = split /\s*:\s*/, $_;
|
|
$arm_machine{'serial'} = $temp[1];
|
|
}
|
|
}
|
|
}
|
|
#print Data::Dumper::Dumper \%arm_machine;
|
|
eval $end if $b_log;
|
|
return %arm_machine;
|
|
}
|
|
|
|
# bios_date: 09/07/2010
|
|
# bios_romsize: dmi only
|
|
# bios_vendor: American Megatrends Inc.
|
|
# bios_version: P1.70
|
|
# bios_rev: 8.14: dmi only
|
|
# board_name: A770DE+
|
|
# board_serial:
|
|
# board_vendor: ASRock
|
|
# board_version:
|
|
# chassis_serial:
|
|
# chassis_type: 3
|
|
# chassis_vendor:
|
|
# chassis_version:
|
|
# firmware:
|
|
# product_name:
|
|
# product_serial:
|
|
# product_uuid:
|
|
# product_version:
|
|
# sys_uuid: dmi/sysctl only
|
|
# sys_vendor:
|
|
sub machine_data_dmi {
|
|
eval $start if $b_log;
|
|
my (%data,$vm);
|
|
return if ! @dmi;
|
|
$data{'firmware'} = 'BIOS';
|
|
# dmi types:
|
|
# 0 bios; 1 system info; 2 board|base board info; 3 chassis info;
|
|
# 4 processor info, use to check for hypervisor
|
|
foreach (@dmi){
|
|
my @ref = @$_;
|
|
# bios/firmware
|
|
if ($ref[0] == 0){
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
foreach my $item (@ref){
|
|
if ($item !~ /^~/){ # skip the indented rows
|
|
my @value = split /:\s+/, $item;
|
|
if ($value[0] eq 'Release Date') {$data{'bios_date'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Vendor') {$data{'bios_vendor'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Version') {$data{'bios_version'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'ROM Size') {$data{'bios_romsize'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'BIOS Revision') {$data{'bios_rev'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] =~ /^UEFI is supported/) {$data{'firmware'} = 'UEFI';}
|
|
}
|
|
}
|
|
next;
|
|
}
|
|
# system information
|
|
elsif ($ref[0] == 1){
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
foreach my $item (@ref){
|
|
if ($item !~ /^~/){ # skip the indented rows
|
|
my @value = split /:\s+/, $item;
|
|
if ($value[0] eq 'Product Name') {$data{'product_name'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Version') {$data{'product_version'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Serial Number') {$data{'product_serial'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Manufacturer') {$data{'sys_vendor'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'UUID') {$data{'sys_uuid'} = main::dmi_cleaner($value[1]) }
|
|
}
|
|
}
|
|
next;
|
|
}
|
|
# baseboard information
|
|
elsif ($ref[0] == 2){
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
foreach my $item (@ref){
|
|
if ($item !~ /^~/){ # skip the indented rows
|
|
my @value = split /:\s+/, $item;
|
|
if ($value[0] eq 'Product Name') {$data{'board_name'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Serial Number') {$data{'board_serial'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Manufacturer') {$data{'board_vendor'} = main::dmi_cleaner($value[1]) }
|
|
}
|
|
}
|
|
next;
|
|
}
|
|
# chassis information
|
|
elsif ($ref[0] == 3){
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
foreach my $item (@ref){
|
|
if ($item !~ /^~/){ # skip the indented rows
|
|
my @value = split /:\s+/, $item;
|
|
if ($value[0] eq 'Serial Number') {$data{'chassis_serial'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Type') {$data{'chassis_type'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Manufacturer') {$data{'chassis_vendor'} = main::dmi_cleaner($value[1]) }
|
|
elsif ($value[0] eq 'Version') {$data{'chassis_version'} = main::dmi_cleaner($value[1]) }
|
|
}
|
|
}
|
|
if ( $data{'chassis_type'} && $data{'chassis_type'} ne 'Other' ){
|
|
$data{'device'} = $data{'chassis_type'};
|
|
}
|
|
next;
|
|
}
|
|
# this may catch some BSD and fringe Linux cases
|
|
# processor information: check for hypervisor
|
|
elsif ($ref[0] == 4){
|
|
# skip first three row, we don't need that data
|
|
splice @ref, 0, 3 if @ref;
|
|
if (!$data{'device'}){
|
|
if (grep {/hypervisor/i} @ref){
|
|
$data{'device'} = 'virtual-machine';
|
|
}
|
|
}
|
|
last;
|
|
}
|
|
elsif ($ref[0] > 4){
|
|
last;
|
|
}
|
|
}
|
|
if (!$data{'device'}){
|
|
$data{'device'} = get_device_vm($data{'sys_vendor'},$data{'product_name'});
|
|
$data{'device'} ||= 'other-vm?';
|
|
}
|
|
# print "dmi:\n";
|
|
# foreach (keys %data){
|
|
# print "$_: $data{$_}\n";
|
|
# }
|
|
main::log_data('dump','%data',\%data) if $b_log;
|
|
my @rows = create_output(\%data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# As far as I know, only OpenBSD supports this method.
|
|
# it uses hw. info from sysctl -a and bios info from dmesg.boot
|
|
sub machine_data_sysctl {
|
|
eval $start if $b_log;
|
|
my (%data,$vm);
|
|
# ^hw\.(vendor|product|version|serialno|uuid)
|
|
foreach (@sysctl_machine){
|
|
next if ! $_;
|
|
my @item = split /:/, $_;
|
|
next if ! $item[1];
|
|
if ($item[0] eq 'hw.vendor'){
|
|
$data{'board_vendor'} = main::dmi_cleaner($item[1]);
|
|
}
|
|
elsif ($item[0] eq 'hw.product'){
|
|
$data{'board_name'} = main::dmi_cleaner($item[1]);
|
|
}
|
|
elsif ($item[0] eq 'hw.version'){
|
|
$data{'board_version'} = $item[1];
|
|
}
|
|
elsif ($item[0] eq 'hw.serialno'){
|
|
$data{'board_serial'} = $item[1];
|
|
}
|
|
elsif ($item[0] eq 'hw.serial'){
|
|
$data{'board_serial'} = $item[1];
|
|
}
|
|
elsif ($item[0] eq 'hw.uuid'){
|
|
$data{'board_uuid'} = $item[1];
|
|
}
|
|
# bios0:at mainbus0: AT/286+ BIOS, date 06/30/06, BIOS32 rev. 0 @ 0xf2030, SMBIOS rev. 2.4 @ 0xf0000 (47 entries)
|
|
# bios0:vendor Phoenix Technologies, LTD version "3.00" date 06/30/2006
|
|
elsif ($item[0] =~ /^bios[0-9]/){
|
|
if ($_ =~ /^^bios[0-9]:at\s.*\srev\.\s([\S]+)\s@.*/){
|
|
$data{'bios_rev'} = $1;
|
|
$data{'firmware'} = 'BIOS' if $_ =~ /BIOS/;
|
|
}
|
|
elsif ($item[1] =~ /^vendor\s(.*)\sversion\s"?([\S]+)"?\sdate\s([\S]+)/ ){
|
|
$data{'bios_vendor'} = $1;
|
|
$data{'bios_version'} = $2;
|
|
$data{'bios_date'} = $3;
|
|
$data{'bios_version'} =~ s/^v//i if $data{'bios_version'} && $data{'bios_version'} !~ /vi/i;
|
|
}
|
|
}
|
|
}
|
|
my @rows = create_output(\%data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub get_device_sys {
|
|
eval $start if $b_log;
|
|
my ($chasis_id) = @_;
|
|
my ($device) = ('');
|
|
my @chassis;
|
|
# https://www.dmtf.org/sites/default/files/standards/documents/DSP0134_2.8.0.pdf
|
|
$chassis[2] = 'unknown';
|
|
# note: 13 is all-in-one which we take as a mac type system
|
|
$chassis[3] = 'desktop';
|
|
$chassis[4] = 'desktop';
|
|
$chassis[6] = 'desktop';
|
|
$chassis[7] = 'desktop';
|
|
$chassis[13] = 'desktop';
|
|
$chassis[15] = 'desktop';
|
|
$chassis[24] = 'desktop';
|
|
# 5 - pizza box was a 1 U desktop enclosure, but some old laptops also id this way
|
|
$chassis[5] = 'pizza-box';
|
|
$chassis[9] = 'laptop';
|
|
# note: lenovo T420 shows as 10, notebook, but it's not a notebook
|
|
$chassis[10] = 'laptop';
|
|
$chassis[16] = 'laptop';
|
|
$chassis[14] = 'notebook';
|
|
$chassis[8] = 'portable';
|
|
$chassis[11] = 'portable';
|
|
$chassis[17] = 'server';
|
|
$chassis[23] = 'server';
|
|
$chassis[25] = 'server';
|
|
$chassis[27] = 'blade';
|
|
$chassis[25] = 'blade';
|
|
$chassis[29] = 'blade';
|
|
$chassis[12] = 'docking-station';
|
|
$chassis[18] = 'expansion-chassis';
|
|
$chassis[19] = 'sub-chassis';
|
|
$chassis[20] = 'bus-expansion';
|
|
$chassis[21] = 'peripheral';
|
|
$chassis[22] = 'RAID';
|
|
$chassis[26] = 'compact-PCI';
|
|
$device = $chassis[$chasis_id] if $chassis[$chasis_id];
|
|
eval $end if $b_log;
|
|
return $device;
|
|
}
|
|
|
|
sub get_device_vm {
|
|
eval $start if $b_log;
|
|
my ($manufacturer,$product_name) = @_;
|
|
my $vm;
|
|
if ( my $program = main::check_program('systemd-detect-virt') ){
|
|
my $vm_test = (main::grabber("$program 2>/dev/null"))[0];
|
|
if ($vm_test){
|
|
# kvm vbox reports as oracle, usually, unless they change it
|
|
if (lc($vm_test) eq 'oracle'){
|
|
$vm = 'virtualbox';
|
|
}
|
|
elsif ( $vm_test ne 'none'){
|
|
$vm = $vm_test;
|
|
}
|
|
}
|
|
}
|
|
if (!$vm || lc($vm) eq 'bochs') {
|
|
if (-e '/proc/vz'){$vm = 'openvz'}
|
|
elsif (-e '/proc/xen'){$vm = 'xen'}
|
|
elsif (-e '/dev/vzfs'){$vm = 'virtuozzo'}
|
|
elsif (my $program = main::check_program('lsmod')){
|
|
my @vm_data = main::grabber("$program 2>/dev/null");
|
|
if (@vm_data){
|
|
if (grep {/kqemu/i} @vm_data){$vm = 'kqemu'}
|
|
elsif (grep {/kvm/i} @vm_data){$vm = 'kvm'}
|
|
elsif (grep {/qemu/i} @vm_data){$vm = 'qemu'}
|
|
}
|
|
}
|
|
}
|
|
# this will catch many Linux systems and some BSDs
|
|
if (!$vm || lc($vm) eq 'bochs' ) {
|
|
my @vm_data = (@pci,@sysctl,@dmesg_boot);
|
|
if (-e '/dev/disk/by-id'){
|
|
my @dev = glob('/dev/disk/by-id/*');
|
|
@vm_data = (@vm_data,@dev);
|
|
}
|
|
if ( grep {/innotek|vbox|virtualbox/i} @vm_data){
|
|
$vm = 'virtualbox';
|
|
}
|
|
elsif (grep {/vmware/i} @vm_data){
|
|
$vm = 'vmware';
|
|
}
|
|
elsif (grep {/Virtual HD/i} @vm_data){
|
|
$vm = 'hyper-v';
|
|
}
|
|
if (!$vm && (my $file = main::system_files('cpuinfo'))){
|
|
my @info = main::reader($file);
|
|
$vm = 'virtual-machine' if grep {/^flags.*hypervisor/} @info;
|
|
}
|
|
if (!$vm && -e '/dev/vda' || -e '/dev/vdb' || -e '/dev/xvda' || -e '/dev/xvdb' ){
|
|
$vm = 'virtual-machine';
|
|
}
|
|
}
|
|
if (!$vm && $product_name){
|
|
if ($product_name eq 'VMware'){
|
|
$vm = 'vmware';
|
|
}
|
|
elsif ($product_name eq 'VirtualBox'){
|
|
$vm = 'virtualbox';
|
|
}
|
|
elsif ($product_name eq 'KVM'){
|
|
$vm = 'kvm';
|
|
}
|
|
elsif ($product_name eq 'Bochs'){
|
|
$vm = 'qemu';
|
|
}
|
|
}
|
|
if (!$vm && $manufacturer && $manufacturer eq 'Xen'){
|
|
$vm = 'xen';
|
|
}
|
|
eval $end if $b_log;
|
|
return $vm;
|
|
}
|
|
|
|
}
|
|
|
|
## NetworkData
|
|
{
|
|
package NetworkData;
|
|
my ($b_ip_run,@ifs_found);
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows);
|
|
my $num = 0;
|
|
if ($b_arm){
|
|
my $key = 'ARM';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('arm-pci',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
@data = card_data();
|
|
@rows = (@rows,@data) if @data;
|
|
@data = usb_data();
|
|
@rows = (@rows,@data) if @data;
|
|
}
|
|
if ($show{'network-advanced'}){
|
|
# @ifs_found = ();
|
|
# shift @ifs_found;
|
|
# pop @ifs_found;
|
|
if (!$bsd_type){
|
|
@data = advanced_data_sys('check','',0,'','');
|
|
@rows = (@rows,@data) if @data;
|
|
}
|
|
else {
|
|
@data = advanced_data_bsd('check');
|
|
@rows = (@rows,@data) if @data;
|
|
}
|
|
}
|
|
if ($show{'ip'}){
|
|
@data = wan_ip();
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# 1 type_id
|
|
# 2 bus_id
|
|
# 3 sub_id
|
|
# 4 device
|
|
# 5 vendor_id
|
|
# 6 chip_id
|
|
# 7 rev
|
|
# 8 port
|
|
# 9 driver
|
|
# 10 modules
|
|
# 11 driver nu (bsds)
|
|
sub card_data {
|
|
eval $start if $b_log;
|
|
my ($b_wifi,@rows,@data,%holder);
|
|
my ($j,$num) = (0,1);
|
|
foreach (@pci){
|
|
$num = 1;
|
|
my @row = @$_;
|
|
#print "$row[0] $row[3]\n";
|
|
# NOTE: class 06 subclass 80
|
|
# https://www-s.acm.illinois.edu/sigops/2007/roll_your_own/7.c.1.html
|
|
if ($row[0] eq 'network' || $row[0] eq 'ethernet' || $row[1] eq '0680' ){
|
|
#print "$row[0] $row[3]\n";
|
|
$j = scalar @rows;
|
|
my $driver = $row[9];
|
|
my $chip_id = "$row[5]:$row[6]";
|
|
# working around a virtuo bug same chip id is used on two nics
|
|
if (!defined $holder{$chip_id}){
|
|
$holder{$chip_id} = 0;
|
|
}
|
|
else {
|
|
$holder{$chip_id}++;
|
|
}
|
|
# first check if it's a known wifi id'ed card, if so, no print of duplex/speed
|
|
$b_wifi = check_wifi($row[4]);
|
|
my $card = $row[4];
|
|
$card = ($card) ? main::pci_cleaner($card,'output') : 'N/A';
|
|
#$card ||= 'N/A';
|
|
$driver ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,'Card') => $card,
|
|
main::key($num++,'driver') => $driver,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
if ($row[9] && !$bsd_type){
|
|
my $version = main::get_module_version($row[9]);
|
|
$version ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'v')} = $version;
|
|
}
|
|
$row[8] ||= 'N/A';
|
|
# as far as I know, wifi has no port, but in case it does in future, use it
|
|
$rows[$j]{main::key($num++,'port')} = $row[8] if (!$b_wifi || ( $b_wifi && $row[8] ne 'N/A') );
|
|
$rows[$j]{main::key($num++,'bus ID')} = $row[2] . '.' . $row[3];
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = $chip_id;
|
|
}
|
|
if ($show{'network-advanced'}){
|
|
if (!$bsd_type){
|
|
@data = advanced_data_sys($row[5],$row[6],$holder{$chip_id},$b_wifi,'');
|
|
}
|
|
else {
|
|
@data = advanced_data_bsd("$row[9]$row[11]",$b_wifi);
|
|
}
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
#print "$row[0]\n";
|
|
}
|
|
# @rows = ();
|
|
if (!@rows){
|
|
my $key = 'Message';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('pci-card-data',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
|
|
}
|
|
#my $ref = $pci[-1];
|
|
#print $$ref[0],"\n";
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub usb_data {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,@temp2,$b_wifi,$driver,$path,$product,$product2,$test,$vendor,$vendor2);
|
|
my ($j,$num) = (0,1);
|
|
return if !@usb;
|
|
foreach my $ref (@usb){
|
|
my @row = @$ref;
|
|
# a device will always be the second or > device on the bus
|
|
if ($row[1] > 1){
|
|
$num = 1;
|
|
($product,$product2,$test,$vendor,$vendor2) = ('','','','','');
|
|
if ($usb_level == 1){
|
|
$product = main::cleaner($row[3]);
|
|
}
|
|
else {
|
|
foreach my $line (@row){
|
|
my @working = split /:/, $line;
|
|
if ($working[0] eq 'idVendor' && $working[2]){
|
|
$vendor = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'idProduct' && $working[2]){
|
|
$product = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'iVendor' && $working[2]){
|
|
$product2 = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'iProduct' && $working[2]){
|
|
$product2 = main::cleaner($working[2]);
|
|
}
|
|
if ($working[0] eq 'Descriptor_Configuration'){
|
|
last;
|
|
}
|
|
}
|
|
if ($vendor && $product){
|
|
$product = ($product =~ /$vendor/) ? $product: "$vendor $product";
|
|
}
|
|
elsif ($vendor && $product2){
|
|
$product = ($product2 =~ /$vendor/) ? $product2: "$vendor $product2";
|
|
}
|
|
elsif ($vendor2 && $product){
|
|
$product = ($product =~ /$vendor2/) ? $product: "$vendor2 $product";
|
|
}
|
|
elsif ($vendor2 && $product2){
|
|
$product = ($product2 =~ /$vendor2/) ? $product2: "$vendor2 $product2";
|
|
}
|
|
elsif ($vendor){
|
|
$product = $vendor;
|
|
}
|
|
elsif ($vendor2){
|
|
$product = $vendor2;
|
|
}
|
|
$test = "$vendor $product $vendor2 $vendor2";
|
|
}
|
|
if ($product && network_device($test)){
|
|
@temp2 = main::get_usb_drivers($row[0],$row[2]) if !$bsd_type && -d "/sys/devices";
|
|
if (@temp2){
|
|
$driver = $temp2[0] if $temp2[0];
|
|
$path = $temp2[1] if $temp2[1];
|
|
}
|
|
$driver ||= 'usb-network';
|
|
@data = ({
|
|
main::key($num++,'Card') => $product,
|
|
main::key($num++,'type') => 'USB',
|
|
main::key($num++,'driver') => $driver,
|
|
},);
|
|
$b_wifi = check_wifi($product);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
$rows[$j]{main::key($num++,'bus ID')} = "$row[0]:$row[1]";
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = $row[2];
|
|
}
|
|
$j = scalar @rows;
|
|
if ($show{'network-advanced'}){
|
|
if (!$bsd_type){
|
|
my (@temp,$vendor,$chip);
|
|
@temp = split (/:/, $row[2]) if $row[2];
|
|
($vendor,$chip) = ($temp[0],$temp[1]) if @temp;
|
|
@data = advanced_data_sys($vendor,$chip,0,$b_wifi,$path);
|
|
}
|
|
# NOTE: we need the driver.number, like wlp0 to get a match, and
|
|
# we can't get that from usb data, so we have to let it fall back down
|
|
# to the check function for BSDs.
|
|
#else {
|
|
# @data = advanced_data_bsd($row[2],$b_wifi);
|
|
#}
|
|
@rows = (@rows,@data) if @data;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub advanced_data_sys {
|
|
eval $start if $b_log;
|
|
return if ! -d '/sys/class/net';
|
|
my ($vendor,$chip,$count,$b_wifi,$path_usb) = @_;
|
|
my $num = 0;
|
|
my $key = 'IF';
|
|
my ($b_check,$b_usb,$if,$path,@paths,@row,@rows);
|
|
# ntoe: we've already gotten the base path, now we
|
|
# we just need to get the IF path, which is one level in:
|
|
# usb1/1-1/1-1:1.0/net/enp0s20f0u1/
|
|
if ($path_usb){
|
|
$b_usb = 1;
|
|
@paths = main::globber("${path_usb}*/net/*");
|
|
}
|
|
else {
|
|
@paths = main::globber('/sys/class/net/*');
|
|
}
|
|
@paths = grep {!/\/lo$/} @paths;
|
|
if ( $count > 0 && $count < scalar @paths ){
|
|
@paths = splice @paths, $count, scalar @paths;
|
|
}
|
|
if ($vendor eq 'check'){
|
|
$b_check = 1;
|
|
$key = 'IF-ID';
|
|
}
|
|
#print join '; ', @paths, $count, "\n";
|
|
foreach (@paths){
|
|
my ($data1,$data2,$duplex,$mac,$speed,$state);
|
|
# for usb, we already know where we are
|
|
if (!$b_usb){
|
|
$path = "$_/device/vendor";
|
|
$data1 = (main::reader($path))[0] if -e $path;
|
|
$data1 =~ s/^0x// if $data1;
|
|
$path = "$_/device/device";
|
|
$data2 = (main::reader($path))[0] if -e $path;
|
|
$data2 =~ s/^0x// if $data2;
|
|
# this is a fix for a redhat bug in virtio
|
|
$data2 = (defined $data2 && $data2 eq '0001' && defined $chip && $chip eq '1000') ? '1000' : $data2;
|
|
}
|
|
#print "d1:$data1 v:$vendor d2:$data2 c:$chip\n";
|
|
if ( $b_usb || $b_check || ( $data1 && $data2 && $data1 eq $vendor && $data2 eq $chip )) {
|
|
$if = $_;
|
|
$if =~ s/^\/.+\///;
|
|
# print "top: if: $if ifs: @ifs_found\n";
|
|
next if ($b_check && grep {/$if/} @ifs_found);
|
|
$path = "$_/duplex";
|
|
$duplex = (main::reader($path))[0] if -e $path;
|
|
$duplex ||= 'N/A';
|
|
$path = "$_/address";
|
|
$mac = (main::reader($path))[0] if -e $path;
|
|
$mac = main::apply_filter($mac);
|
|
$path = "$_/speed";
|
|
$speed = (main::reader($path))[0] if -e $path;
|
|
$speed ||= 'N/A';
|
|
$path = "$_/operstate";
|
|
$state = (main::reader($path))[0] if -e $path;
|
|
$state ||= 'N/A';
|
|
#print "$speed \n";
|
|
@row = ({
|
|
main::key($num++,$key) => $if,
|
|
main::key($num++,'state') => $state,
|
|
},);
|
|
#my $j = scalar @row - 1;
|
|
push (@ifs_found, $if) if (!$b_check && (! grep {/$if/} @ifs_found));
|
|
# print "push: if: $if ifs: @ifs_found\n";
|
|
# no print out for wifi since it doesn't have duplex/speed data available
|
|
# note that some cards show 'unknown' for state, so only testing explicitly
|
|
# for 'down' string in that to skip showing speed/duplex
|
|
# /sys/class/net/$if/wireless : nont always there, but worth a try: wlan/wl/ww/wlp
|
|
$b_wifi = 1 if !$b_wifi && ( -e "$_$if/wireless" || $if =~ /^(wl|ww)/);
|
|
if (!$b_wifi && $state ne 'down' && $state ne 'no'){
|
|
# make sure the value is strictly numeric before appending Mbps
|
|
$speed = ($speed =~ /^[0-9]+$/) ? "$speed Mbps" : $speed;
|
|
$row[0]{main::key($num++,'speed')} = $speed;
|
|
$row[0]{main::key($num++,'duplex')} = $duplex;
|
|
}
|
|
$row[0]{main::key($num++,'mac')} = $mac;
|
|
if ($b_check){
|
|
@rows = (@rows,@row);
|
|
}
|
|
else {
|
|
@rows = @row;
|
|
}
|
|
if ($show{'ip'}){
|
|
@row = if_ip($if);
|
|
@rows = (@rows,@row);
|
|
}
|
|
last if !$b_check;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub advanced_data_bsd {
|
|
eval $start if $b_log;
|
|
return if ! @ifs_bsd;
|
|
my ($if,$b_wifi) = @_;
|
|
my (@data,@row,@rows,$working_if);
|
|
my ($b_check,$state,$speed,$duplex,$mac);
|
|
my $num = 0;
|
|
my $key = 'IF';
|
|
my $j = 0;
|
|
if ($if eq 'check'){
|
|
$b_check = 1;
|
|
$key = 'IF-ID';
|
|
}
|
|
foreach my $ref (@ifs_bsd){
|
|
if (ref $ref ne 'ARRAY'){
|
|
$working_if = $ref;
|
|
# print "$working_if\n";
|
|
next;
|
|
}
|
|
else {
|
|
@data = @$ref;
|
|
}
|
|
if ( $b_check || $working_if eq $if){
|
|
$if = $working_if if $b_check;
|
|
# print "top: if: $if ifs: @ifs_found\n";
|
|
next if ($b_check && grep {/$if/} @ifs_found);
|
|
foreach my $line (@data){
|
|
# ($state,$speed,$duplex,$mac)
|
|
$duplex = $data[2];
|
|
$duplex ||= 'N/A';
|
|
$mac = main::apply_filter($data[3]);
|
|
$speed = $data[1];
|
|
$speed ||= 'N/A';
|
|
$state = $data[0];
|
|
$state ||= 'N/A';
|
|
#print "$speed \n";
|
|
@row = ({
|
|
main::key($num++,$key) => $if,
|
|
main::key($num++,'state') => $state,
|
|
},);
|
|
push (@ifs_found, $if) if (!$b_check && (! grep {/$if/} @ifs_found ));
|
|
# print "push: if: $if ifs: @ifs_found\n";
|
|
# no print out for wifi since it doesn't have duplex/speed data available
|
|
# note that some cards show 'unknown' for state, so only testing explicitly
|
|
# for 'down' string in that to skip showing speed/duplex
|
|
if (!$b_wifi && $state ne 'down' && $state ne 'no'){
|
|
# make sure the value is strictly numeric before appending Mbps
|
|
$speed = ($speed =~ /^[0-9]+$/) ? "$speed Mbps" : $speed;
|
|
$row[0]{main::key($num++,'speed')} = $speed;
|
|
$row[0]{main::key($num++,'duplex')} = $duplex;
|
|
}
|
|
$row[0]{main::key($num++,'mac')} = $mac;
|
|
}
|
|
@rows = (@rows,@row);
|
|
if ($show{'ip'}){
|
|
@row = if_ip($if) if $if;
|
|
@rows = (@rows,@row) if @row;
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
## values:
|
|
# 0 - ipv
|
|
# 1 - ip
|
|
# 2 - broadcast, if found
|
|
# 3 - scope, if found
|
|
# 4 - scope if, if different from if
|
|
sub if_ip {
|
|
eval $start if $b_log;
|
|
$b_ip_run = 1;
|
|
my ($if) = @_;
|
|
my (@data,@row,@rows,$working_if);
|
|
my $num = 0;
|
|
my $j = 0;
|
|
OUTER:
|
|
foreach my $ref (@ifs){
|
|
if (ref $ref ne 'ARRAY'){
|
|
$working_if = $ref;
|
|
# print "if:$if wif:$working_if\n";
|
|
next;
|
|
}
|
|
else {
|
|
@data = @$ref;
|
|
# print "ref:$ref\n";
|
|
}
|
|
if ($working_if eq $if){
|
|
foreach my $ref2 (@data){
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
if ($limit > 0 && $j >= $limit){
|
|
@row = ({
|
|
main::key($num++,'Message') => main::row_defaults('output-limit',scalar @data),
|
|
},);
|
|
@rows = (@rows,@row);
|
|
last OUTER;
|
|
}
|
|
my @data2 = @$ref2;
|
|
#print "$data2[0] $data2[1]\n";
|
|
my ($ipv,$ip,$broadcast,$scope,$scope_id);
|
|
$ipv = ($data2[0])? $data2[0]: 'N/A';
|
|
$ip = main::apply_filter($data2[1]);
|
|
$scope = ($data2[3])? $data2[3]: 'N/A';
|
|
if ($if ne 'all'){
|
|
if (defined $data2[4] && $working_if ne $data2[4]){
|
|
# scope global temporary deprecated dynamic
|
|
# scope global dynamic
|
|
# scope global temporary deprecated dynamic
|
|
# scope site temporary deprecated dynamic
|
|
# scope global eth0
|
|
# scope link
|
|
# scope site dynamic
|
|
# scope link
|
|
my $key = ($data2[4] =~ /deprecated|dynamic|temporary/ ) ? 'type':'virtual' ;
|
|
@row = ({
|
|
main::key($num++,"IP v$ipv") => $ip,
|
|
main::key($num++,$key) => $data2[4],
|
|
main::key($num++,'scope') => $scope,
|
|
},);
|
|
}
|
|
else {
|
|
@row = ({
|
|
main::key($num++,"IP v$ipv") => $ip,
|
|
main::key($num++,'scope') => $scope,
|
|
},);
|
|
}
|
|
}
|
|
else {
|
|
@row = ({
|
|
main::key($num++,'IF') => $if,
|
|
main::key($num++,"IP v$ipv") => $ip,
|
|
main::key($num++,'scope') => $scope,
|
|
},);
|
|
}
|
|
@rows = (@rows,@row);
|
|
if ($extra > 1 && $data2[2]){
|
|
$broadcast = main::apply_filter($data2[2]);
|
|
$rows[$j]{main::key($num++,'broadcast')} = $broadcast;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
# get ip using downloader to stdout. This is a clean, text only IP output url,
|
|
# single line only, ending in the ip address. May have to modify this in the future
|
|
# to handle ipv4 and ipv6 addresses but should not be necessary.
|
|
# ip=$( echo 2001:0db8:85a3:0000:0000:8a2e:0370:7334 | gawk --re-interval '
|
|
# ip=$( wget -q -O - $WAN_IP_URL | gawk --re-interval '
|
|
# this generates a direct dns based ipv4 ip address, but if opendns.com goes down,
|
|
# the fall backs will still work.
|
|
# note: consistently slower than domain based:
|
|
# dig +short +time=1 +tries=1 myip.opendns.com. A @208.67.222.222
|
|
sub wan_ip {
|
|
eval $start if $b_log;
|
|
my (@data,$ip);
|
|
my $num = 0;
|
|
# time: 0.06 - 0.07 seconds
|
|
if (my $program = main::check_program('dig')){
|
|
$ip = (main::grabber("$program +short +time=1 +tries=1 myip.opendns.com \@resolver1.opendns.com 2>/dev/null"))[0];
|
|
}
|
|
else {
|
|
# note: tests: akamai: 0.055 - 0.065 icanhazip.com: 0.177 0.164
|
|
# smxi: 0.525, so almost 10x slower. Dig is fast too
|
|
# leaving smxi as last test because I know it will always be up.
|
|
my @urls = qw( http://whatismyip.akamai.com/ http://icanhazip.com/ https://smxi.org/opt/ip.php);
|
|
foreach (@urls){
|
|
$ip = main::download_file('stdout',$_);
|
|
if ($ip){
|
|
# print "$_\n";
|
|
chomp $ip;
|
|
$ip = (split /\s+/, $ip)[-1];
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
if ($ip && $show{'filter'}){
|
|
$ip = $filter_string;
|
|
}
|
|
$ip ||= main::row_defaults('IP', 'WAN IP');
|
|
@data = ({
|
|
main::key($num++,'WAN IP') => $ip,
|
|
},);
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
|
|
### USB networking search string data, because some brands can have other products than
|
|
### wifi/nic cards, they need further identifiers, with wildcards.
|
|
### putting the most common and likely first, then the less common, then some specifics
|
|
|
|
# Wi-Fi.*Adapter Wireless.*Adapter Ethernet.*Adapter WLAN.*Adapter
|
|
# Network.*Adapter 802\.11 Atheros Atmel D-Link.*Adapter D-Link.*Wireless Linksys
|
|
# Netgea Ralink Realtek.*Network Realtek.*Wireless Realtek.*WLAN Belkin.*Wireless
|
|
# Belkin.*WLAN Belkin.*Network Actiontec.*Wireless Actiontec.*Network AirLink.*Wireless
|
|
# Asus.*Network Asus.*Wireless Buffalo.*Wireless Davicom DWA-.*RangeBooster DWA-.*Wireless
|
|
# ENUWI-.*Wireless LG.*Wi-Fi Rosewill.*Wireless RNX-.*Wireless Samsung.*LinkStick
|
|
# Samsung.*Wireless Sony.*Wireless TEW-.*Wireless TP-Link.*Wireless
|
|
# WG[0-9][0-9][0-9].*Wireless WNA[0-9][0-9][0-9] WNDA[0-9][0-9][0-9]
|
|
# Zonet.*ZEW.*Wireless
|
|
sub network_device {
|
|
eval $start if $b_log;
|
|
my ($device_string) = @_;
|
|
my ($b_network);
|
|
# belkin=050d; d-link=07d1; netgear=0846; ralink=148f; realtek=0bda;
|
|
# Atmel makes other stuff
|
|
my @tests = qw(wifi Wi-Fi.*Adapter Ethernet \bLAN\b WLAN Network 802\.11
|
|
Wireless.*Adapter 54\sMbps Network 100\/1000 Mobile\sBroadband Atheros D-Link.*Adapter
|
|
Dell.*Wireless D-Link.*Wireless Linksys Netgea Ralink Realtek.*Network Realtek.*Wireless
|
|
Belkin.*Wireless Actiontec.*Wireless AirLink.*Wireless Asus.*Wireless
|
|
Buffalo.*Wireless Davicom DWA-.*RangeBooster DWA-.*Wireless
|
|
ENUWI-.*Wireless LG.*Wi-Fi Rosewill.*Wireless RNX-.*Wireless Samsung.*LinkStick
|
|
Samsung.*Wireless Sony.*Wireless TEW-.*Wireless TP-Link.*Wireless
|
|
WG[0-9][0-9][0-9].*Wireless WNA[0-9][0-9][0-9] WNDA[0-9][0-9][0-9]
|
|
Zonet.*ZEW.*Wireless 050d:935b 0bda:8189 0bda:8197
|
|
);
|
|
foreach (@tests){
|
|
if ($device_string =~ /$_/i ){
|
|
$b_network = 1;
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $b_network;
|
|
}
|
|
sub check_wifi {
|
|
my ($item) = @_;
|
|
my $b_wifi = ($item =~ /wireless|wifi|wi-fi|wlan|802\.11|centrino/i) ? 1 : 0;
|
|
return $b_wifi;
|
|
}
|
|
}
|
|
|
|
## OpticalData
|
|
{
|
|
package OpticalData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,$key1,$val1);
|
|
my $num = 0;
|
|
if ($bsd_type){
|
|
#@data = optical_data_bsd();
|
|
$key1 = 'Optical Report';
|
|
$val1 = main::row_defaults('optical-data-bsd');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
if ( @dm_boot_optical){
|
|
@data = optical_data_bsd();
|
|
}
|
|
else{
|
|
my $file = main::system_files('dmesg-boot');
|
|
if ( $file && ! -r $file ){
|
|
$val1 = main::row_defaults('dmesg-boot-permissions');
|
|
}
|
|
elsif (!$file){
|
|
$val1 = main::row_defaults('dmesg-boot-missing');
|
|
}
|
|
else {
|
|
$val1 = main::row_defaults('optical-data-bsd');
|
|
}
|
|
$key1 = 'Optical Report';
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
}
|
|
else {
|
|
@data = optical_data_linux();
|
|
}
|
|
if (!@data){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('optical-data');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
@rows = (@rows,@data);
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (%devices) = @_;
|
|
my (@data,@rows);
|
|
my $num = 0;
|
|
my $j = 0;
|
|
# build floppy if any
|
|
foreach my $key (sort keys %devices){
|
|
if ($devices{$key}{'type'} eq 'floppy'){
|
|
@data = ({ main::key($num++,ucfirst($devices{$key}{'type'})) => "/dev/$key"});
|
|
@rows = (@rows,@data);
|
|
delete $devices{$key};
|
|
}
|
|
}
|
|
foreach my $key (sort keys %devices){
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
my $vendor = $devices{$key}{'vendor'};
|
|
$vendor ||= 'N/A';
|
|
my $model = $devices{$key}{'model'};
|
|
$model ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,ucfirst($devices{$key}{'type'})) => "/dev/$key",
|
|
main::key($num++,'vendor') => $vendor,
|
|
main::key($num++,'model') => $model,
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
my $rev = $devices{$key}{'rev'};
|
|
$rev ||= 'N/A';
|
|
$rows[$j]{ main::key($num++,'rev')} = $rev;
|
|
}
|
|
if ($extra > 1 && $devices{$key}{'serial'}){
|
|
$rows[$j]{ main::key($num++,'serial')} = main::apply_filter($devices{$key}{'serial'});
|
|
}
|
|
my $ref = $devices{$key}{'links'};
|
|
my $links = (@$ref) ? join ',', sort @$ref: 'N/A' ;
|
|
$rows[$j]{ main::key($num++,'dev-links')} = $links;
|
|
if ($show{'optical'}){
|
|
$j = scalar @rows;
|
|
my $speed = $devices{$key}{'speed'};
|
|
$speed ||= 'N/A';
|
|
my ($audio,$multisession) = ('','');
|
|
if (defined $devices{$key}{'multisession'}){
|
|
$multisession = ( $devices{$key}{'multisession'} == 1 ) ? 'yes' : 'no' ;
|
|
}
|
|
$multisession ||= 'N/A';
|
|
if (defined $devices{$key}{'audio'}){
|
|
$audio = ( $devices{$key}{'audio'} == 1 ) ? 'yes' : 'no' ;
|
|
}
|
|
$audio ||= 'N/A';
|
|
my $dvd = 'N/A';
|
|
my (@rw,$rws);
|
|
if (defined $devices{$key}{'dvd'}){
|
|
$dvd = ( $devices{$key}{'dvd'} == 1 ) ? 'yes' : 'no' ;
|
|
}
|
|
if ($devices{$key}{'cdr'}){
|
|
push @rw, 'cd-r';
|
|
}
|
|
if ($devices{$key}{'cdrw'}){
|
|
push @rw, 'cd-rw';
|
|
}
|
|
if ($devices{$key}{'dvdr'}){
|
|
push @rw, 'dvd-r';
|
|
}
|
|
if ($devices{$key}{'dvdram'}){
|
|
push @rw, 'dvd-ram';
|
|
}
|
|
$rws = (@rw) ? join ',', @rw: 'none' ;
|
|
@data = ({
|
|
main::key($num++,'Features') => '',
|
|
main::key($num++,'speed') => $speed,
|
|
main::key($num++,'multisession') => $multisession,
|
|
main::key($num++,'audio') => $audio,
|
|
main::key($num++,'dvd') => $dvd,
|
|
main::key($num++,'rw') => $rws,
|
|
});
|
|
@rows = (@rows,@data);
|
|
|
|
if ($extra > 0 ){
|
|
my $state = $devices{$key}{'state'};
|
|
$state ||= 'N/A';
|
|
$rows[$j]{ main::key($num++,'state')} = $state;
|
|
}
|
|
}
|
|
}
|
|
#print Data::Dumper::Dumper \%devices;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub optical_data_bsd {
|
|
eval $start if $b_log;
|
|
my (@data,%devices,@rows,@temp);
|
|
my ($count,$i,$working) = (0,0,'');
|
|
foreach (@dm_boot_optical){
|
|
$_ =~ s/(cd[0-9]+)\(([^:]+):([0-9]+):([0-9]+)\):/$1:$2-$3.$4,/;
|
|
my @row = split /:\s*/, $_;
|
|
next if ! defined $row[1];
|
|
if ($working ne $row[0]){
|
|
# print "$id_holder $row[0]\n";
|
|
$working = $row[0];
|
|
}
|
|
# no dots, note: ada2: 2861588MB BUT: ada2: 600.000MB/s
|
|
if (! exists $devices{$working}){
|
|
$devices{$working} = ({});
|
|
$devices{$working}{'links'} = ([]);
|
|
$devices{$working}{'model'} = '';
|
|
$devices{$working}{'rev'} = '';
|
|
$devices{$working}{'state'} = '';
|
|
$devices{$working}{'vendor'} = '';
|
|
$devices{$working}{'temp'} = '';
|
|
$devices{$working}{'type'} = ($working =~ /^cd/) ? 'optical' : 'unknown';
|
|
}
|
|
#print "$_\n";
|
|
if ($bsd_type ne 'openbsd'){
|
|
if ($row[1] && $row[1] =~ /^<([^>]+)>/){
|
|
$devices{$working}{'model'} = $1;
|
|
$count = ($devices{$working}{'model'} =~ tr/ //);
|
|
if ($count && $count > 1){
|
|
@temp = split /\s+/, $devices{$working}{'model'};
|
|
$devices{$working}{'vendor'} = $temp[0];
|
|
my $index = ($#temp > 2 ) ? ($#temp - 1): $#temp;
|
|
$devices{$working}{'model'} = join ' ', @temp[1..$index];
|
|
$devices{$working}{'rev'} = $temp[-1] if $count > 2;
|
|
}
|
|
if ($show{'optical'}){
|
|
if (/\bDVD\b/){
|
|
$devices{$working}{'dvd'} = 1;
|
|
}
|
|
if (/\bRW\b/){
|
|
$devices{$working}{'cdrw'} = 1;
|
|
$devices{$working}{'dvdr'} = 1 if $devices{$working}{'dvd'};
|
|
}
|
|
}
|
|
}
|
|
if ($row[1] && $row[1] =~ /^Serial/){
|
|
@temp = split /\s+/,$row[1];
|
|
$devices{$working}{'serial'} = $temp[-1];
|
|
}
|
|
if ($show{'optical'}){
|
|
if ($row[1] =~ /^([0-9\.]+[MGTP][B]?\/s)/){
|
|
$devices{$working}{'speed'} = $1;
|
|
$devices{$working}{'speed'} =~ s/\.[0-9]+//;
|
|
}
|
|
if (/\bDVD[-]?RAM\b/){
|
|
$devices{$working}{'cdr'} = 1;
|
|
$devices{$working}{'dvdram'} = 1;
|
|
}
|
|
if ($row[2] && $row[2] =~ /,\s(.*)$/){
|
|
$devices{$working}{'state'} = $1;
|
|
$devices{$working}{'state'} =~ s/\s+-\s+/, /;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
if ($row[2] && $row[2] =~ /<([^>]+)>/){
|
|
$devices{$working}{'model'} = $1;
|
|
$count = ($devices{$working}{'model'} =~ tr/,//);
|
|
#print "c: $count $row[2]\n";
|
|
if ($count && $count > 1){
|
|
@temp = split /,\s*/, $devices{$working}{'model'};
|
|
$devices{$working}{'vendor'} = $temp[0];
|
|
$devices{$working}{'model'} = $temp[1];
|
|
$devices{$working}{'rev'} = $temp[2];
|
|
}
|
|
if ($show{'optical'}){
|
|
if (/\bDVD\b/){
|
|
$devices{$working}{'dvd'} = 1;
|
|
}
|
|
if (/\bRW\b/){
|
|
$devices{$working}{'cdrw'} = 1;
|
|
$devices{$working}{'dvdr'} = 1 if $devices{$working}{'dvd'};
|
|
}
|
|
if (/\bDVD[-]?RAM\b/){
|
|
$devices{$working}{'cdr'} = 1;
|
|
$devices{$working}{'dvdram'} = 1;
|
|
}
|
|
}
|
|
}
|
|
if ($show{'optical'}){
|
|
#print "$row[1]\n";
|
|
if (($row[1] =~ tr/,//) > 1){
|
|
@temp = split /,\s*/, $row[1];
|
|
$devices{$working}{'speed'} = $temp[2];
|
|
}
|
|
|
|
}
|
|
}
|
|
}
|
|
|
|
main::log_data('dump','%devices',\%devices) if $b_log;
|
|
#print Data::Dumper::Dumper \%devices;
|
|
@rows = create_output(%devices) if %devices;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub optical_data_linux {
|
|
eval $start if $b_log;
|
|
my (@data,%devices,@info,@rows);
|
|
@data = main::globber('/dev/dvd* /dev/cdr* /dev/scd* /dev/sr* /dev/fd[0-9]');
|
|
# Newer kernel is NOT linking all optical drives. Some, but not all.
|
|
# Get the actual disk dev location, first try default which is easier to run,
|
|
# need to preserve line breaks
|
|
foreach (@data){
|
|
my $working = readlink($_);
|
|
$working = ($working) ? $working: $_;
|
|
next if $working =~ /random/;
|
|
# possible fix: puppy has these in /mnt not /dev they say
|
|
$working =~ s/\/(dev|media|mnt)\///;
|
|
$_ =~ s/\/(dev|media|mnt)\///;
|
|
if (! defined $devices{$working}){
|
|
my @temp = ($_ ne $working) ? ([$_]) : ([]);
|
|
$devices{$working} = ({'links' => @temp});
|
|
$devices{$working}{'type'} = ($working =~ /^fd/) ? 'floppy' : 'optical' ;
|
|
}
|
|
else {
|
|
my $ref = $devices{$working}{'links'};
|
|
push @$ref, $_ if $_ ne $working;
|
|
}
|
|
#print "$working\n";
|
|
}
|
|
if ($show{'optical'} && -e '/proc/sys/dev/cdrom/info'){
|
|
@info = main::reader('/proc/sys/dev/cdrom/info','strip');
|
|
}
|
|
#print join '; ', @data, "\n";
|
|
foreach my $key (keys %devices){
|
|
next if $devices{$key}{'type'} eq 'floppy';
|
|
my $device = "/sys/block/$key/device";
|
|
if ( -d $device){
|
|
if (-e "$device/vendor"){
|
|
$devices{$key}{'vendor'} = (main::reader("$device/vendor"))[0];
|
|
$devices{$key}{'vendor'} = main::cleaner($devices{$key}{'vendor'});
|
|
$devices{$key}{'state'} = (main::reader("$device/state"))[0];
|
|
$devices{$key}{'model'} = (main::reader("$device/model"))[0];
|
|
$devices{$key}{'model'} = main::cleaner($devices{$key}{'model'});
|
|
$devices{$key}{'rev'} = (main::reader("$device/rev"))[0];
|
|
}
|
|
}
|
|
elsif ( -e "/proc/ide/$_/model"){
|
|
$devices{$key}{'vendor'} = (main::reader("/proc/ide/$_/model"))[0];
|
|
$devices{$key}{'vendor'} = main::cleaner($devices{$key}{'vendor'});
|
|
}
|
|
if ($show{'optical'} && @info){
|
|
my $index = 0;
|
|
foreach my $item (@info){
|
|
next if $item =~ /^\s*$/;
|
|
my @split = split '\s+', $item;
|
|
if ($item =~ /^drive name:/){
|
|
foreach my $id (@split){
|
|
last if ($id eq $key);
|
|
$index++;
|
|
}
|
|
last if ! $index; # index will be > 0 if it was found
|
|
}
|
|
elsif ($item =~/^drive speed:/) {
|
|
$devices{$key}{'speed'} = $split[$index];
|
|
}
|
|
elsif ($item =~/^Can read multisession:/) {
|
|
$devices{$key}{'multisession'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can read MCN:/) {
|
|
$devices{$key}{'mcn'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can play audio:/) {
|
|
$devices{$key}{'audio'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can write CD-R:/) {
|
|
$devices{$key}{'cdr'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can write CD-RW:/) {
|
|
$devices{$key}{'cdrw'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can read DVD:/) {
|
|
$devices{$key}{'dvd'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can write DVD-R:/) {
|
|
$devices{$key}{'dvdr'}=$split[$index+1];
|
|
}
|
|
elsif ($item =~/^Can write DVD-RAM:/) {
|
|
$devices{$key}{'dvdram'}=$split[$index+1];
|
|
}
|
|
}
|
|
}
|
|
}
|
|
main::log_data('dump','%devices',\%devices) if $b_log;
|
|
#print Data::Dumper::Dumper \%devices;
|
|
@rows = create_output(%devices) if %devices;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
}
|
|
|
|
## PartitionData
|
|
{
|
|
package PartitionData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@rows,$key1,$val1);
|
|
my $num = 0;
|
|
partition_data() if !$b_partitions;
|
|
if (!@partitions) {
|
|
$key1 = 'Message';
|
|
#$val1 = ($bsd_type && $bsd_type eq 'darwin') ?
|
|
# main::row_defaults('darwin-feature') : main::row_defaults('partition-data');
|
|
$val1 = main::row_defaults('partition-data');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
else {
|
|
@rows = create_output();
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my $j = 0;
|
|
my (@data,@data2,%part,@rows,$dev,$dev_type,$fs);
|
|
@partitions = sort { $a->{'id'} cmp $b->{'id'} } @partitions;
|
|
foreach my $ref (@partitions){
|
|
my %row = %$ref;
|
|
$num = 1;
|
|
next if $row{'type'} eq 'secondary' && $show{'partition'};
|
|
@data2 = main::get_size($row{'size'}) if (defined $row{'size'});
|
|
my $size = (@data2) ? $data2[0] . ' ' . $data2[1]: 'N/A';
|
|
@data2 = main::get_size($row{'used'}) if (defined $row{'used'});
|
|
my $used = (@data2) ? $data2[0] . ' ' . $data2[1]: 'N/A';
|
|
my $percent = (defined $row{'percent-used'}) ? ' (' . $row{'percent-used'} . '%)' : '';
|
|
%part = ();
|
|
if (defined $row{'dev-base'}){
|
|
if ($row{'dev-base'} =~ /^non-dev-/){
|
|
$row{'dev-base'} =~ s/^non-dev-//;
|
|
$dev_type = 'raid';
|
|
$dev = $row{'dev-base'};
|
|
}
|
|
# note: I have seen this: beta:data/ for sshfs path
|
|
elsif ($row{'dev-base'} =~ /^\/\/|:\//){
|
|
$dev_type = 'remote';
|
|
$dev = $row{'dev-base'};
|
|
}
|
|
# an error has occurred almost for sure
|
|
elsif (!$row{'dev-base'}){
|
|
$dev_type = 'dev';
|
|
$dev = main::row_defaults('unknown-dev');
|
|
}
|
|
else {
|
|
$dev_type = 'dev';
|
|
$dev = '/dev/' . $row{'dev-base'};
|
|
}
|
|
}
|
|
else {
|
|
$dev_type = 'dev';
|
|
}
|
|
$fs = ($row{'fs'}) ? lc($row{'fs'}): 'N/A';
|
|
$dev ||= 'N/A';
|
|
$j = scalar @rows;
|
|
@data = ({
|
|
main::key($num++,'ID') => $row{'id'},
|
|
main::key($num++,'size') => $size,
|
|
main::key($num++,'used') => $used . $percent,
|
|
main::key($num++,'fs') => $fs,
|
|
main::key($num++,$dev_type) => $dev,
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($show{'label'}){
|
|
$rows[$j]{main::key($num++,'label')} = ($row{'label'}) ? $row{'label'}: 'N/A';
|
|
}
|
|
if ($show{'uuid'}){
|
|
$rows[$j]{main::key($num++,'uuid')} = ($row{'uuid'}) ? $row{'uuid'}: 'N/A';
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub partition_data {
|
|
eval $start if $b_log;
|
|
#return if $bsd_type && $bsd_type eq 'darwin'; # darwin has muated output, of course
|
|
my (@data,@rows,@mapper,@mount,@partitions_working,%part);
|
|
my ($b_fake_map,$b_fs,$b_load,$cols,$roots) = (0,1,0,6,0);
|
|
my ($back_size,$back_used) = (4,3);
|
|
my ($dev_base,$fs,$id,$label,$percent_used,$size,$type,$uuid,$used);
|
|
$b_partitions = 1;
|
|
set_lsblk() if !$bsd_type && !$b_lsblk;
|
|
# set labels, uuid, gpart
|
|
set_label_uuid() if !$b_label_uuid;
|
|
# most current OS support -T and -k, but -P means different things
|
|
# in freebsd. However since most use is from linux, we make that default
|
|
if (!$bsd_type){
|
|
@partitions_working = main::grabber("df -P -T -k 2>/dev/null");
|
|
if (-d '/dev/mapper'){
|
|
@mapper = main::globber('/dev/mapper/*');
|
|
}
|
|
}
|
|
else {
|
|
# this is missing the file system data
|
|
if ($bsd_type ne 'darwin'){
|
|
@partitions_working = main::grabber("df -T -k 2>/dev/null");
|
|
}
|
|
#Filesystem 1024-blocks Used Available Capacity iused ifree %iused Mounted on
|
|
else {
|
|
$cols = 8;
|
|
$b_fake_map = 1;
|
|
($back_size,$back_used) = (7,6);
|
|
}
|
|
if (!@partitions_working){
|
|
@partitions_working = main::grabber("df -k 2>/dev/null");
|
|
$b_fs = 0;
|
|
$cols = 5 if $bsd_type ne 'darwin';
|
|
if (my $path = main::check_program('mount')){
|
|
@mount = main::grabber("$path 2>/dev/null");
|
|
}
|
|
}
|
|
}
|
|
# determine positions
|
|
my $row1 = shift @partitions_working;
|
|
# new kernels/df have rootfs and / repeated, creating two entries for the same partition
|
|
# so check for two string endings of / then slice out the rootfs one, I could check for it
|
|
# before slicing it out, but doing that would require the same action twice re code execution
|
|
foreach (@partitions_working){
|
|
if (/\s\/$/){
|
|
$roots++;
|
|
}
|
|
}
|
|
@partitions_working = grep {!/^rootfs/} @partitions_working if $roots > 1;
|
|
my $filters = '^(aufs|cgroup.*|cgmfs|configfs|debugfs|\/dev|dev|\/dev/loop[0-9]*|';
|
|
$filters .= 'devfs|devtmpfs|fdescfs|iso9660|linprocfs|none|procfs|\/run(\/.*)?|';
|
|
$filters .= 'run|shm|squashfs|sys|\/sys\/.*|sysfs|tmpfs|type|udev|unionfs|vartmp)$';
|
|
foreach (@partitions_working){
|
|
# stupid apple bullshit
|
|
$_ =~ s/^map\s+([\S]+)/map:\/$1/ if $b_fake_map;
|
|
my @row = split /\s+/, $_;
|
|
if ($row[0] =~ /$filters/ || $row[0] =~ /^ROOT/i || ($b_fs && $row[1] eq 'tmpfs')){
|
|
next;
|
|
}
|
|
$dev_base = '';
|
|
$fs = '';
|
|
$id = '';
|
|
$label = '';
|
|
$size = 0;
|
|
$used = 0;
|
|
%part = ();
|
|
$percent_used = 0;
|
|
$type = '';
|
|
$uuid = '';
|
|
$b_load = 0;
|
|
# NOTE: using -P for linux fixes line wraps, and for bsds, assuming they don't use such long file names
|
|
if ($row[0] =~ /^\/dev\/|:\/|\/\//){
|
|
# this could point to by-label or by-uuid so get that first. In theory, abs_path should
|
|
# drill down to get the real path, but it isn't always working.
|
|
if ($row[0] eq '/dev/root'){
|
|
$row[0] = get_root();
|
|
}
|
|
# sometimes paths are set using /dev/disk/by-[label|uuid] so we need to get the /dev/xxx path
|
|
if ($row[0] =~ /by-label|by-uuid/){
|
|
$row[0] = Cwd::abs_path($row[0]);
|
|
}
|
|
elsif ($row[0] =~ /mapper\// && @mapper){
|
|
$row[0] = get_mapper($row[0],@mapper);
|
|
}
|
|
$dev_base = $row[0];
|
|
$dev_base =~ s/^\/dev\///;
|
|
%part = check_lsblk($dev_base,0) if @lsblk;
|
|
}
|
|
# this handles zfs type devices/partitions, which do not start with / but contain /
|
|
# note: Main/jails/transmission_1 path can be > 1 deep
|
|
# Main zfs 3678031340 8156 3678023184 0% /mnt/Main
|
|
if (!$dev_base && ($row[0] =~ /^([^\/]+\/)(.+)/ || ($row[0] =~ /^[^\/]+$/ && $row[1] =~ /^(btrfs|zfs)$/ ) ) ){
|
|
$dev_base = "non-dev-$row[0]";
|
|
}
|
|
# this handles yet another fredforfaen special case where a mounted drive
|
|
# has the search string in its name
|
|
if ($row[-1] =~ /^\/$|^\/boot$|^\/var$|^\/var\/tmp$|^\/var\/log$|^\/home$|^\/opt$|^\/tmp$|^\/usr$/){
|
|
$b_load = 1;
|
|
# note, older df in bsd do not have file system column
|
|
$type = 'main';
|
|
}
|
|
elsif ($row[$cols] !~ /^\/$|^\/boot$|^\/var$|^\/var\/tmp$|^\/var\/log$|^\/home$|^\/opt$|^\/tmp$|^\/usr$|^filesystem/){
|
|
$b_load = 1;
|
|
$type = 'secondary';
|
|
}
|
|
if ($b_load){
|
|
if (!$bsd_type){
|
|
$fs = (%part && $part{'fs'}) ? $part{'fs'} : $row[1];
|
|
if ($show{'label'}) {
|
|
if (%part && $part{'label'}) {
|
|
$label = $part{'label'};
|
|
}
|
|
elsif ( @labels){
|
|
$label = get_label($row[0]);
|
|
}
|
|
}
|
|
if ($show{'uuid'}) {
|
|
if (%part && $part{'uuid'}) {
|
|
$uuid = $part{'uuid'};
|
|
}
|
|
elsif ( @uuids){
|
|
$uuid = get_uuid($row[0]);
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$fs = ($b_fs) ? $row[1]: get_bsd_fs($row[0],@mount);
|
|
if (@gpart && ($show{'label'} || $show{'uuid'} ) ){
|
|
my @extra = get_bsd_label_uuid("$dev_base");
|
|
if (@extra){
|
|
$label = $extra[0];
|
|
$uuid = $extra[1];
|
|
}
|
|
}
|
|
}
|
|
$id = join ' ', @row[$cols .. $#row];
|
|
$id =~ s/\/home\/[^\/]+\/(.*)/\/home\/$filter_string\/$1/ if $show{'filter'};
|
|
$size = $row[$cols - $back_size];
|
|
$used = $row[$cols - $back_used];
|
|
$percent_used = sprintf( "%.1f", ( $used/$size )*100 ) if ($size);
|
|
@data = ({
|
|
'id' => $id,
|
|
'dev-base' => $dev_base,
|
|
'fs' => $fs,
|
|
'label' => $label,
|
|
'size' => $size,
|
|
'type' => $type,
|
|
'used' => $used,
|
|
'uuid' => $uuid,
|
|
'percent-used' => $percent_used,
|
|
});
|
|
@partitions = (@partitions,@data);
|
|
}
|
|
}
|
|
@data = swap_data();
|
|
@partitions = (@partitions,@data);
|
|
main::log_data('dump','@partitions',\@partitions) if $b_log;
|
|
# print Data::Dumper::Dumper \@partitions;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub swap_data {
|
|
eval $start if $b_log;
|
|
my (@swap,@working,$path,$label,$uuid);
|
|
my ($s,$j,$size_id,$used_id) = (1,0,2,3);
|
|
if (!$bsd_type){
|
|
# faster, avoid subshell, same as swapon -s
|
|
if ( -r '/proc/swaps'){
|
|
@working = main::reader("/proc/swaps");
|
|
}
|
|
elsif ( $path = main::check_program('swapon') ){
|
|
# note: while -s is deprecated, --show --bytes is not supported
|
|
# on older systems
|
|
@working = main::grabber("$path -s 2>/dev/null");
|
|
}
|
|
}
|
|
else {
|
|
if ( $path = main::check_program('swapctl') ){
|
|
# output in in KB blocks
|
|
@working = main::grabber("$path -l -k 2>/dev/null");
|
|
}
|
|
($size_id,$used_id) = (1,2);
|
|
}
|
|
# now add the swap partition data, don't want to show swap files, just partitions,
|
|
# though this can include /dev/ramzswap0. Note: you can also use /proc/swaps for this
|
|
# data, it's the same exact output as swapon -s
|
|
foreach (@working){
|
|
next if ! /^\/dev/;
|
|
my @data = split /\s+/, $_;
|
|
my $dev_base = $data[0];
|
|
$dev_base =~ s/^\/dev\///;
|
|
my $size = $data[$size_id];
|
|
my $used = $data[$used_id];
|
|
my $percent_used = sprintf( "%.1f", ( $used/$size )*100 );
|
|
if ($show{'label'} && @labels){
|
|
$label = get_label($data[0]);
|
|
}
|
|
if ($show{'uuid'} && @uuids){
|
|
$uuid = get_uuid($data[0]);
|
|
}
|
|
if ($bsd_type && @gpart && ($show{'label'} || $show{'uuid'} ) ){
|
|
my @extra = get_bsd_label_uuid("$dev_base");
|
|
if (@extra){
|
|
$label = $extra[0];
|
|
$uuid = $extra[1];
|
|
}
|
|
}
|
|
@data = ({
|
|
'id' => "swap-$s",
|
|
'dev-base' => $dev_base,
|
|
'fs' => 'swap',
|
|
'label' => $label,
|
|
'size' => $size,
|
|
'type' => 'main',
|
|
'used' => $used,
|
|
'uuid' => $uuid,
|
|
'percent-used' => $percent_used,
|
|
});
|
|
@swap = (@swap,@data);
|
|
$s++;
|
|
}
|
|
eval $end if $b_log;
|
|
return @swap;
|
|
}
|
|
sub get_bsd_fs {
|
|
eval $start if $b_log;
|
|
my ($item,@mount) = @_;
|
|
$item =~ s/map:\/(\S+)/map $1/ if $bsd_type eq 'darwin';
|
|
return 'N/A' if ! @mount;
|
|
my ($fs) = ('');
|
|
# linux: /dev/sdb6 on /var/www/m type ext4 (rw,relatime,data=ordered)
|
|
# bsd: /dev/ada0s1a on / (ufs, local, soft-updates)
|
|
foreach (@mount){
|
|
if ($_ =~ /^$item\son.*\(([^,\s\)]+)[,\s]*.*\)/){
|
|
$fs = $1;
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
main::log_data('data',"fs: $fs") if $b_log;
|
|
return $fs;
|
|
}
|
|
# 1. Name: ada1p1
|
|
# label: (null)
|
|
# label: ssd-root
|
|
# rawuuid: b710678b-f196-11e1-98fd-021fc614aca9
|
|
sub get_bsd_label_uuid {
|
|
eval $start if $b_log;
|
|
my ($item) = @_;
|
|
my (@data,$b_found);
|
|
foreach (@gpart){
|
|
my @working = split /\s*:\s*/, $_;
|
|
if ($_ =~ /^[0-9]+\.\sName:/ && $working[1] eq $item){
|
|
$b_found = 1;
|
|
}
|
|
elsif ($_ =~ /^[0-9]+\.\sName:/ && $working[1] ne $item){
|
|
$b_found = 0;
|
|
}
|
|
if ($b_found){
|
|
if ($working[0] eq 'label'){
|
|
$data[0] = $working[1];
|
|
$data[0] =~ s/\(|\)//g; # eg: label:(null) - we want to show null
|
|
}
|
|
if ($working[0] eq 'rawuuid'){
|
|
$data[1] = $working[1];
|
|
$data[0] =~ s/\(|\)//g;
|
|
}
|
|
}
|
|
}
|
|
main::log_data('dump','@data',\@data) if $b_log;
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
sub set_label_uuid {
|
|
eval $start if $b_log;
|
|
$b_label_uuid = 1;
|
|
if ( $show{'unmounted'} || $show{'label'} || $show{'uuid'} ){
|
|
if (!$bsd_type){
|
|
if (-d '/dev/disk/by-label'){
|
|
@labels = main::globber('/dev/disk/by-label/*');
|
|
}
|
|
if (-d '/dev/disk/by-uuid'){
|
|
@uuids = main::globber('/dev/disk/by-uuid/*');
|
|
}
|
|
}
|
|
else {
|
|
if ( my $path = main::check_program('gpart')){
|
|
@gpart = main::grabber("$path list 2>/dev/null",'strip');
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub set_lsblk {
|
|
eval $start if $b_log;
|
|
$b_lsblk = 1;
|
|
my (@temp,@working);
|
|
if (my $program = main::check_program('lsblk')){
|
|
@working = main::grabber("$program -bP --output NAME,TYPE,RM,FSTYPE,SIZE,LABEL,UUID,SERIAL,MOUNTPOINT 2>/dev/null");
|
|
foreach (@working){
|
|
if (/NAME="([^"]*)"\s+TYPE="([^"]*)"\s+RM="([^"]*)"\s+FSTYPE="([^"]*)"\s+SIZE="([^"]*)"\s+LABEL="([^"]*)"\s+UUID="([^"]*)"\s+SERIAL="([^"]*)"\s+MOUNTPOINT="([^"]*)"/){
|
|
my $size = ($5) ? $5/1024: 0;
|
|
# some versions of lsblk do not return serial, fs, uuid, or label
|
|
my @temp = ({
|
|
'name' => $1,
|
|
'type' => $2,
|
|
'rm' => $3,
|
|
'fs' => $4,
|
|
'size' => $size,
|
|
'label' => $6,
|
|
'uuid' => $7,
|
|
'serial' => $8,
|
|
'mount' => $9,
|
|
});
|
|
@lsblk = (@lsblk,@temp);
|
|
}
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \@lsblk;
|
|
main::log_data('dump','@lsblk',\@lsblk) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
sub check_lsblk {
|
|
eval $start if $b_log;
|
|
my ($name,$b_size) = @_;
|
|
my (%part,@row);
|
|
foreach my $ref (@lsblk){
|
|
my %row = %$ref;
|
|
next if ! $row{'name'};
|
|
if ($name eq $row{'name'}){
|
|
%part = %row;
|
|
last;
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \%part;
|
|
main::log_data('dump','%part',\%part) if $b_log;
|
|
eval $end if $b_log;
|
|
return %part;
|
|
}
|
|
sub get_label {
|
|
eval $start if $b_log;
|
|
my ($item) = @_;
|
|
my $label = '';
|
|
foreach (@labels){
|
|
if ($item eq Cwd::abs_path($_)){
|
|
$label = $_;
|
|
$label =~ s/\/dev\/disk\/by-label\///;
|
|
$label =~ s/\\x20/ /g;
|
|
$label =~ s%\\x2f%/%g;
|
|
last;
|
|
}
|
|
}
|
|
$label ||= 'N/A';
|
|
eval $end if $b_log;
|
|
return $label;
|
|
}
|
|
# args: $1 - dev item $2 - @mapper
|
|
# check for mapper, then get actual dev item if mapped
|
|
# /dev/mapper/ will usually be a symbolic link to the real /dev id
|
|
sub get_mapper {
|
|
eval $start if $b_log;
|
|
my ($item,@mapper) = @_;
|
|
my $mapped = '';
|
|
foreach (@mapper){
|
|
if ($item eq $_){
|
|
my $temp = Cwd::abs_path($_);
|
|
$mapped = $temp if $temp;
|
|
last;
|
|
}
|
|
}
|
|
$mapped ||= $item;
|
|
eval $end if $b_log;
|
|
return $mapped;
|
|
}
|
|
sub get_root {
|
|
eval $start if $b_log;
|
|
my ($path) = ('/dev/root');
|
|
# note: the path may be a symbolic link to by-label/by-uuid but not
|
|
# sure how far in abs_path resolves the path.
|
|
my $temp = Cwd::abs_path($path);
|
|
$path = $temp if $temp;
|
|
# note: it's a kernel config option to have /dev/root be a sym link
|
|
# or not, if it isn't, path will be empty, if so, then try mount
|
|
if (!$path && (my $program = main::check_program('mount'))){
|
|
my @data = main::grabber("$program 2>/dev/null");
|
|
# /dev/sda2 on / type ext4 (rw,noatime,data=ordered)
|
|
foreach (@data){
|
|
if (/^([\S]+)\son\s\/\s/){
|
|
$path = $1;
|
|
# note: we'll be handing off any uuid/label paths to the next
|
|
# check tools after get_root() above, so don't trim those.
|
|
$path =~ s/.*\/// if $path !~ /by-uuid|by-label/;
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $path;
|
|
}
|
|
|
|
sub get_uuid {
|
|
eval $start if $b_log;
|
|
my ($item) = @_;
|
|
my $uuid = '';
|
|
foreach (@uuids){
|
|
if ($item eq Cwd::abs_path($_)){
|
|
$uuid = $_;
|
|
$uuid =~ s/\/dev\/disk\/by-uuid\///;
|
|
last;
|
|
}
|
|
}
|
|
$uuid ||= 'N/A';
|
|
eval $end if $b_log;
|
|
return $uuid;
|
|
}
|
|
}
|
|
|
|
## ProcessData
|
|
{
|
|
package ProcessData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@processes,@rows);
|
|
if ($show{'ps-cpu'}){
|
|
@rows = cpu_processes();
|
|
@processes = (@processes,@rows);
|
|
}
|
|
if ($show{'ps-mem'}){
|
|
@rows = mem_processes();
|
|
@processes = (@processes,@rows);
|
|
}
|
|
return @processes;
|
|
eval $end if $b_log;
|
|
}
|
|
sub cpu_processes {
|
|
eval $start if $b_log;
|
|
my ($j,$num,$cpu,$cpu_mem,$mem) = (0,0,'','','');
|
|
my (@processes);
|
|
my $count = ($b_irc)? 5: $ps_count;
|
|
my @rows = sort {
|
|
my @a = split(/\s+/,$a);
|
|
my @b = split(/\s+/,$b);
|
|
$b[2] <=> $a[2] } @ps_aux;
|
|
# if there's a count limit, for irc, etc, only use that much of the data
|
|
@rows = splice @rows,0,$count;
|
|
|
|
$j = scalar @rows;
|
|
# $cpu_mem = ' - Memory: MiB / % used' if $extra > 0;
|
|
my $throttled = throttled($ps_count,$count,$j);
|
|
#my $header = "CPU % used - Command - pid$cpu_mem - top";
|
|
#my $header = "Top $count by CPU";
|
|
my @data = ({
|
|
main::key($num++,'CPU top') => "$count$throttled",
|
|
},);
|
|
@processes = (@processes,@data);
|
|
my $i = 1;
|
|
foreach (@rows){
|
|
$num = 1;
|
|
$j = scalar @processes;
|
|
my @row = split /\s+/, $_;
|
|
my @command = process_starter(scalar @row, $row[10],$row[11]);
|
|
@data = ({
|
|
main::key($num++,$i++) => '',
|
|
main::key($num++,'cpu') => $row[2] . '%',
|
|
main::key($num++,'command') => $command[0],
|
|
},);
|
|
@processes = (@processes,@data);
|
|
if ($command[1]) {
|
|
$processes[$j]{main::key($num++,'started by')} = $command[1];
|
|
}
|
|
$processes[$j]{main::key($num++,'pid')} = $row[1];
|
|
if ($extra > 0){
|
|
my $decimals = ($row[5]/1024 > 10 ) ? 1 : 2;
|
|
$mem = (defined $row[5]) ? sprintf( "%.${decimals}f", $row[5]/1024 ) . ' MiB' : 'N/A';
|
|
$mem .= ' (' . $row[3] . '%)';
|
|
$processes[$j]{main::key($num++,'mem')} = $mem;
|
|
}
|
|
#print Data::Dumper::Dumper \@processes, "i: $i; j: $j ";
|
|
}
|
|
eval $end if $b_log;
|
|
return @processes;
|
|
}
|
|
sub mem_processes {
|
|
eval $start if $b_log;
|
|
my ($j,$num,$cpu,$cpu_mem,$mem) = (0,0,'','','');
|
|
my (@data,@processes,$memory);
|
|
my $count = ($b_irc)? 5: $ps_count;
|
|
my @rows = sort {
|
|
my @a = split(/\s+/,$a);
|
|
my @b = split(/\s+/,$b);
|
|
$b[5] <=> $a[5] } @ps_aux;
|
|
@rows = splice @rows,0,$count;
|
|
#print Data::Dumper::Dumper \@rows;
|
|
@processes = main::memory_data_full('process') if !$b_mem;
|
|
$j = scalar @rows;
|
|
my $throttled = throttled($ps_count,$count,$j);
|
|
#$cpu_mem = ' - CPU: % used' if $extra > 0;
|
|
#my $header = "Memory MiB/% used - Command - pid$cpu_mem - top";
|
|
#my $header = "Top $count by Memory";
|
|
@data = ({
|
|
main::key($num++,'Memory top') => "$count$throttled",
|
|
},);
|
|
@processes = (@processes,@data);
|
|
my $i = 1;
|
|
foreach (@rows){
|
|
$num = 1;
|
|
$j = scalar @processes;
|
|
my @row = split /\s+/, $_;
|
|
my $decimals = ($row[5]/1024 > 10 ) ? 1 : 2;
|
|
$mem = ($row[5]) ? sprintf( "%.${decimals}f", $row[5]/1024 ) . ' MiB' : 'N/A';
|
|
my @command = process_starter(scalar @row, $row[10],$row[11]);
|
|
$mem .= " (" . $row[3] . "%)";
|
|
@data = ({
|
|
main::key($num++,$i++) => '',
|
|
main::key($num++,'mem') => $mem,
|
|
main::key($num++,'command') => $command[0],
|
|
},);
|
|
@processes = (@processes,@data);
|
|
if ($command[1]) {
|
|
$processes[$j]{main::key($num++,'started by')} = $command[1];
|
|
}
|
|
$processes[$j]{main::key($num++,'pid')} = $row[1];
|
|
if ($extra > 0){
|
|
$cpu = $row[2] . '%';
|
|
$processes[$j]{main::key($num++,'cpu')} = $cpu;
|
|
}
|
|
#print Data::Dumper::Dumper \@processes, "i: $i; j: $j ";
|
|
}
|
|
eval $end if $b_log;
|
|
return @processes;
|
|
}
|
|
sub process_starter {
|
|
my ($count, $row10, $row11) = @_;
|
|
my (@return);
|
|
# note: [migration/0] would clear with a simple basename
|
|
if ($count > 11 && $row11 =~ /^\//){
|
|
$row11 =~ s/^\/.*\///;
|
|
$return[0] = $row11;
|
|
$row10 =~ s/^\/.*\///;
|
|
$return[1] = $row10;
|
|
}
|
|
else {
|
|
$row10 =~ s/^\/.*\///;
|
|
$return[0] = $row10;
|
|
$return[1] = '';
|
|
}
|
|
return @return;
|
|
}
|
|
sub throttled {
|
|
my ($ps_count,$count,$j) = @_;
|
|
my $throttled = '';
|
|
if ($count > $j){
|
|
$throttled = " ( $j processes)";
|
|
}
|
|
elsif ($count < $ps_count){
|
|
$throttled = " (throttled from $ps_count)";
|
|
}
|
|
return $throttled;
|
|
}
|
|
}
|
|
|
|
## RaidData
|
|
{
|
|
package RaidData;
|
|
# debugger switches
|
|
my ($b_md,$b_zfs) = (0,0);
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@rows,$key1,$val1);
|
|
my $num = 0;
|
|
raid_data() if !$b_raid;
|
|
#print 'get: ', Data::Dumper::Dumper \@raid;
|
|
if (!@raid){
|
|
if ($show{'raid-forced'}){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('raid-data');
|
|
}
|
|
}
|
|
else {
|
|
@rows = create_output();
|
|
}
|
|
if (!@rows && $key1){
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
eval $end if $b_log;
|
|
($b_md,$b_zfs) = undef;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (@arrays,@arrays_holder,@components,@components_good,@data,@failed,@rows,
|
|
@sizes,@spare,@temp);
|
|
my ($allocated,$available,$blocks_avail,$chunk_raid,$component_string,$raid,
|
|
$ref2,$ref3,$report_size,$size,$status);
|
|
my ($b_row_1_sizes);
|
|
my ($i,$j,$num,$status_id) = (0,0,0,0);
|
|
#print Data::Dumper::Dumper \@raid;
|
|
if ($extra > 2 && $raid[0]{'system-supported'}){
|
|
@data = ({
|
|
main::key($num++,'Supported md-raid types') => $raid[0]{'system-supported'},
|
|
});
|
|
@rows = (@rows,@data);
|
|
}
|
|
foreach my $ref (@raid){
|
|
$j = scalar @rows;
|
|
my %row = %$ref;
|
|
$b_row_1_sizes = 0;
|
|
next if !%row;
|
|
$num = 1;
|
|
@data = ({
|
|
main::key($num++,'Device') => $row{'id'},
|
|
main::key($num++,'type') => $row{'type'},
|
|
main::key($num++,'status') => $row{'status'},
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($row{'type'} eq 'mdraid'){
|
|
$blocks_avail = 'blocks';
|
|
$chunk_raid = 'chunk size';
|
|
$report_size = 'report';
|
|
if ($extra > 0){
|
|
$available = ($row{'blocks'}) ? $row{'blocks'} : 'N/A';
|
|
}
|
|
$size = ($row{'report'}) ? $row{'report'}: '';
|
|
$size .= " $row{'u-data'}" if $size;
|
|
$size ||= 'N/A';
|
|
$status_id = 2;
|
|
}
|
|
else {
|
|
$blocks_avail = 'free';
|
|
$chunk_raid = 'allocated';
|
|
$report_size = 'size';
|
|
@sizes = ($row{'size'}) ? main::get_size($row{'size'}) : ();
|
|
$size = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
@sizes = ($row{'free'}) ? main::get_size($row{'free'}) : ();
|
|
$available = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
if ($extra > 2){
|
|
@sizes = ($row{'allocated'}) ? main::get_size($row{'allocated'}) : ();
|
|
$allocated = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
}
|
|
$status_id = 1;
|
|
}
|
|
$ref2 = $row{'arrays'};
|
|
@arrays = @$ref2;
|
|
@arrays = grep {defined $_} @arrays;
|
|
@arrays_holder = @arrays;
|
|
if (($row{'type'} eq 'mdraid' && $extra == 0 ) || !defined $arrays[0]{'raid'} ){
|
|
$raid = (defined $arrays[0]{'raid'}) ? $arrays[0]{'raid'}: 'no-raid';
|
|
$rows[$j]{main::key($num++,'raid')} = $raid;
|
|
}
|
|
if ( ( $row{'type'} eq 'zfs' || ($row{'type'} eq 'mdraid' && $extra == 0 ) ) && $size){
|
|
#print "here 0\n";
|
|
$rows[$j]{main::key($num++,$report_size)} = $size;
|
|
$size = '';
|
|
$b_row_1_sizes = 1;
|
|
}
|
|
if ( $row{'type'} eq 'zfs' && $available){
|
|
$rows[$j]{main::key($num++,$blocks_avail)} = $available;
|
|
$available = '';
|
|
$b_row_1_sizes = 1;
|
|
}
|
|
if ( $row{'type'} eq 'zfs' && $allocated){
|
|
$rows[$j]{main::key($num++,$chunk_raid)} = $allocated;
|
|
$allocated = '';
|
|
}
|
|
$i = 0;
|
|
my $count = scalar @arrays;
|
|
foreach $ref3 (@arrays){
|
|
my %row2 = %$ref3;
|
|
if ($count > 1){
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
@sizes = ($row2{'size'}) ? main::get_size($row2{'size'}) : ();
|
|
$size = (@sizes) ? "$sizes[0] $sizes[1]" : 'N/A';
|
|
@sizes = ($row2{'free'}) ? main::get_size($row2{'free'}) : ();
|
|
$available = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
$raid = (defined $row2{'raid'}) ? $row2{'raid'}: 'no-raid';
|
|
$status = ($row2{'status'}) ? $row2{'status'}: 'N/A';
|
|
@data = ({
|
|
main::key($num++,'array') => $raid,
|
|
main::key($num++,'status') => $status,
|
|
main::key($num++,'size') => $size,
|
|
main::key($num++,'free') => $available,
|
|
});
|
|
@rows = (@rows,@data);
|
|
}
|
|
# items like cache may have one component, with a size on that component
|
|
elsif (!$b_row_1_sizes && $row{'type'} eq 'zfs'){
|
|
#print "here $count\n";
|
|
@sizes = ($row2{'size'}) ? main::get_size($row2{'size'}) : ();
|
|
$size = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
@sizes = ($row2{'free'}) ? main::get_size($row2{'free'}) : ();
|
|
$available = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
$rows[$j]{main::key($num++,'size')} = $size;
|
|
$rows[$j]{main::key($num++,'free')} = $available;
|
|
if ($extra > 2){
|
|
@sizes = ($row{'allocated'}) ? main::get_size($row2{'allocated'}) : ();
|
|
$allocated = (@sizes) ? "$sizes[0] $sizes[1]" : '';
|
|
if ($allocated){
|
|
$rows[$j]{main::key($num++,$chunk_raid)} = $allocated;
|
|
}
|
|
}
|
|
}
|
|
$ref3 = $row2{'components'};
|
|
@components = (ref $ref3 eq 'ARRAY') ? @$ref3 : ();
|
|
@failed = ();
|
|
@spare = ();
|
|
@components_good = ();
|
|
# @spare = split(/\s+/, $row{'unused'}) if $row{'unused'};
|
|
foreach my $item (@components){
|
|
@temp = split /~/, $item;
|
|
if (defined $temp[$status_id] && $temp[$status_id] =~ /^(F|DEGRADED|FAULTED|UNAVAIL)$/){
|
|
$temp[0] = "$temp[0]~$temp[1]" if $status_id == 2;
|
|
push @failed, $temp[0];
|
|
}
|
|
elsif (defined $temp[$status_id] && $temp[$status_id] =~ /(S|OFFLINE)$/){
|
|
$temp[0] = "$temp[0]~$temp[1]" if $status_id == 2;
|
|
push @spare, $temp[0];
|
|
}
|
|
else {
|
|
$temp[0] = ($status_id == 2) ? "$temp[0]~$temp[1]" : $temp[0];
|
|
push @components_good, $temp[0];
|
|
}
|
|
}
|
|
$component_string = (@components_good) ? join ' ', @components_good : 'N/A';
|
|
$rows[$j]{main::key($num++,'Components')} = '';
|
|
$rows[$j]{main::key($num++,'online')} = $component_string;
|
|
if (@failed){
|
|
$rows[$j]{main::key($num++,'FAILED')} = join ' ', @failed;
|
|
}
|
|
if (@spare){
|
|
$rows[$j]{main::key($num++,'spare')} = join ' ', @spare;
|
|
}
|
|
if ($row{'type'} eq 'mdraid' && $extra > 0 ){
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
#print Data::Dumper::Dumper \@arrays_holder;
|
|
$rows[$j]{main::key($num++,'Info')} = '';
|
|
$raid = (defined $arrays_holder[0]{'raid'}) ? $arrays_holder[0]{'raid'}: 'no-raid';
|
|
$rows[$j]{main::key($num++,'raid')} = $raid;
|
|
$rows[$j]{main::key($num++,$blocks_avail)} = $available;
|
|
if ($size){
|
|
$rows[$j]{main::key($num++,$report_size)} = $size;
|
|
}
|
|
my $chunk = ($row{'chunk-size'}) ? $row{'chunk-size'}: 'N/A';
|
|
$rows[$j]{main::key($num++,$chunk_raid)} = $chunk;
|
|
if ($extra > 1){
|
|
if ($row{'bitmap'}){
|
|
$rows[$j]{main::key($num++,'bitmap')} = $row{'bitmap'};
|
|
}
|
|
if ($row{'super-block'}){
|
|
$rows[$j]{main::key($num++,'super blocks')} = $row{'super-block'};
|
|
}
|
|
if ($row{'algorithm'}){
|
|
$rows[$j]{main::key($num++,'algorithm')} = $row{'algorithm'};
|
|
}
|
|
}
|
|
}
|
|
$i++;
|
|
}
|
|
if ($row{'recovery-percent'}){
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
my $percent = $row{'recovery-percent'};
|
|
if ($extra > 1 && $row{'progress-bar'}){
|
|
$percent .= " $row{'progress-bar'}"
|
|
}
|
|
$rows[$j]{main::key($num++,'Recovering')} = $percent;
|
|
my $finish = ($row{'recovery-finish'})?$row{'recovery-finish'} : 'N/A';
|
|
$rows[$j]{main::key($num++,'time remaining')} = $finish;
|
|
if ($extra > 0){
|
|
if ($row{'sectors-recovered'}){
|
|
$rows[$j]{main::key($num++,'sectors')} = $row{'sectors-recovered'};
|
|
}
|
|
}
|
|
if ($extra > 1 && $row{'recovery-speed'}){
|
|
$rows[$j]{main::key($num++,'speed')} = $row{'recovery-speed'};
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
#print Data::Dumper::Dumper \@rows;
|
|
return @rows;
|
|
}
|
|
sub raid_data {
|
|
eval $start if $b_log;
|
|
my (@data);
|
|
$b_raid = 1;
|
|
if ($b_md || (my $file = main::system_files('mdstat') )){
|
|
@data = mdraid_data($file);
|
|
@raid = (@raid,@data) if @data;
|
|
}
|
|
if ($b_zfs || (my $path = main::check_program('zpool') )){
|
|
@data = zfs_data($path);
|
|
@raid = (@raid,@data) if @data;
|
|
}
|
|
main::log_data('dump','@raid',\@raid) if $b_log;
|
|
#print Data::Dumper::Dumper \@raid;
|
|
eval $end if $b_log;
|
|
}
|
|
sub mdraid_data {
|
|
eval $start if $b_log;
|
|
my ($mdstat) = @_;
|
|
my $j = 0;
|
|
#$mdstat = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/md-4-device-1.txt";
|
|
#$mdstat = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/md-rebuild-1.txt";
|
|
#$mdstat = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/md-2-mirror-fserver2-1.txt";
|
|
#$mdstat = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/md-2-raid10-abucodonosor.txt";
|
|
my @working = main::reader($mdstat,'strip');
|
|
#print Data::Dumper::Dumper \@working;
|
|
my (@data,@mdraid,@temp,$b_found,$system,$unused);
|
|
# NOTE: a system with empty mdstat will still show these values
|
|
if ($working[0] && $working[0] =~ /^Personalities/){
|
|
$system = ( split /:\s*/, $working[0])[1];
|
|
$system =~ s/\[|\]//g if $system;
|
|
shift @working;
|
|
}
|
|
if ($working[-1] && $working[-1] =~ /^used\sdevices/){
|
|
$unused = ( split /:\s*/, $working[0])[1];
|
|
$unused =~ s/<|>|none//g if $unused;
|
|
pop @working;
|
|
}
|
|
foreach (@working){
|
|
$_ =~ s/\s*:\s*/:/;
|
|
# print "$_\n";
|
|
#md126 : active (auto-read-only) raid1 sdq1[0]
|
|
if (/^(md[0-9]+)\s*:\s*([^\s]+)(\s\([^)]+\))?\s([^\s]+)\s(.*)/){
|
|
my $id = $1;
|
|
my $status = $2;
|
|
my $raid = $4;
|
|
my $component_string = $5;
|
|
@temp = ();
|
|
$raid =~ s/^raid1$/mirror/;
|
|
$raid =~ s/^raid/raid-/;
|
|
$raid = 'mirror' if $raid eq '1';
|
|
# remember, these include the [x] id, so remove that for disk/unmounted
|
|
my @components = split /\s+/, $component_string;
|
|
foreach my $component (@components){
|
|
$component =~ /([\S]+)\[([0-9]+)\]\(?([SF])?\)?/;
|
|
my $string = "$1~";
|
|
$string .= (defined $2) ? "c$2" : '';
|
|
$string .= (defined $3) ? "~$3" : '';
|
|
push @temp, $string;
|
|
}
|
|
@components = @temp;
|
|
#print "$component_string\n";
|
|
$j = scalar @mdraid;
|
|
@data = ({
|
|
'id' => $id,
|
|
'arrays' => ([],),
|
|
'status' => $status,
|
|
'type' => 'mdraid',
|
|
});
|
|
@mdraid = (@mdraid,@data);
|
|
$mdraid[$j]{'arrays'}[0]{'raid'} = $raid;
|
|
$mdraid[$j]{'arrays'}[0]{'components'} = \@components;
|
|
}
|
|
#print "$_\n";
|
|
if ($_ =~ /^([0-9]+)\sblocks/){
|
|
$mdraid[$j]{'blocks'} = $1;
|
|
}
|
|
if ($_ =~ /super\s([0-9\.]+)\s/){
|
|
$mdraid[$j]{'super-block'} = $1;
|
|
}
|
|
if ($_ =~ /algorithm\s([0-9\.]+)\s/){
|
|
$mdraid[$j]{'algorithm'} = $1;
|
|
}
|
|
if ($_ =~ /\[([0-9]+\/[0-9]+)\]\s\[([U_]+)\]/){
|
|
$mdraid[$j]{'report'} = $1;
|
|
$mdraid[$j]{'u-data'} = $2;
|
|
}
|
|
if ($_ =~ /resync=([\S]+)/){
|
|
$mdraid[$j]{'resync'} = $1;
|
|
}
|
|
if ($_ =~ /([0-9]+[km])\schunk/i){
|
|
$mdraid[$j]{'chunk-size'} = $1;
|
|
}
|
|
if ($_ =~ /(\[[=]*>[\.]*\]).*(resync|recovery)\s*=\s*([0-9\.]+%)?(\s\(([0-9\/]+)\))?/){
|
|
$mdraid[$j]{'progress-bar'} = $1;
|
|
$mdraid[$j]{'recovery-percent'} = $3 if $3;
|
|
$mdraid[$j]{'sectors-recovered'} = $5 if $5;
|
|
}
|
|
if ($_ =~ /finish\s*=\s*([\S]+)\s+speed\s*=\s*([\S]+)/){
|
|
$mdraid[$j]{'recovery-finish'} = $1;
|
|
$mdraid[$j]{'recovery-speed'} = $2;
|
|
}
|
|
#print 'mdraid loop: ', Data::Dumper::Dumper \@mdraid;
|
|
}
|
|
if (@mdraid){
|
|
$mdraid[0]{'system-supported'} = $system if $system;
|
|
$mdraid[0]{'unused'} = $unused if $unused;
|
|
}
|
|
#print Data::Dumper::Dumper \@mdraid;
|
|
eval $end if $b_log;
|
|
return @mdraid;
|
|
}
|
|
|
|
sub zfs_data {
|
|
eval $start if $b_log;
|
|
my ($zpool) = @_;
|
|
my (@components,@data,@zfs);
|
|
my ($allocated,$free,$ref,$size,$status);
|
|
my $b_v = 1;
|
|
my ($i,$j,$k) = (0,0,0);
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-list-1-mirror-main-solestar.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-list-2-mirror-main-solestar.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-list-v-tank-1.txt";
|
|
#my @working = main::reader($file);$zpool = '';
|
|
my @working = main::grabber("$zpool list -v 2>/dev/null");
|
|
DiskData::set_glabel() if $bsd_type && !$b_glabel;
|
|
# bsd sed does not support inserting a true \n so use this trick
|
|
# some zfs does not have -v
|
|
if (!@working){
|
|
@working = main::grabber("$zpool list 2>/dev/null");
|
|
$b_v = 0;
|
|
}
|
|
#print Data::Dumper::Dumper \@working;
|
|
main::log_data('dump','@working',\@working) if $b_log;
|
|
if (!@working){
|
|
main::log_data('data','no zpool list data') if $b_log;
|
|
eval $end if $b_log;
|
|
return ();
|
|
}
|
|
my ($status_i) = (0);
|
|
# NAME SIZE ALLOC FREE EXPANDSZ FRAG CAP DEDUP HEALTH ALTROOT
|
|
my $test = shift @working; # get rid of first header line
|
|
if ($test){
|
|
foreach (split /\s+/, $test){
|
|
last if $_ eq 'HEALTH';
|
|
$status_i++;
|
|
}
|
|
}
|
|
foreach (@working){
|
|
my @row = split /\s+/, $_;
|
|
if (/^[\S]+/){
|
|
@components = ();
|
|
$i = 0;
|
|
$size = ($row[1] && $row[1] ne '-')? main::translate_size($row[1]): '';
|
|
$allocated = ($row[2] && $row[2] ne '-')? main::translate_size($row[2]): '';
|
|
$free = ($row[3] && $row[3] ne '-')? main::translate_size($row[3]): '';
|
|
$status = (defined $row[$status_i] && $row[$status_i] ne '') ? $row[$status_i]: 'no-status';
|
|
$j = scalar @zfs;
|
|
@data = ({
|
|
'id' => $row[0],
|
|
'allocated' => $allocated,
|
|
'arrays' => ([],),
|
|
'free' => $free,
|
|
'size' => $size,
|
|
'status' => $status,
|
|
'type' => 'zfs',
|
|
});
|
|
@zfs = (@zfs,@data);
|
|
}
|
|
#print Data::Dumper::Dumper \@zfs;
|
|
# raid level is the second item in the output, unless it is not, sometimes it is absent
|
|
if ($row[1] =~ /raid|mirror/){
|
|
$row[1] =~ s/^raid1/mirror/;
|
|
#$row[1] =~ s/^raid/raid-/; # need to match in zpool status <device>
|
|
$ref = $zfs[$j]{'arrays'};
|
|
$k = scalar @$ref;
|
|
$zfs[$j]{'arrays'}[$k]{'raid'} = $row[1];
|
|
$i = 0;
|
|
$zfs[$j]{'arrays'}[$k]{'size'} = ($row[2] && $row[2] ne '-') ? main::translate_size($row[2]) : '';
|
|
$zfs[$j]{'arrays'}[$k]{'allocated'} = ($row[3] && $row[3] ne '-') ? main::translate_size($row[3]) : '';
|
|
$zfs[$j]{'arrays'}[$k]{'free'} = ($row[4] && $row[4] ne '-') ? main::translate_size($row[4]) : '';
|
|
}
|
|
# https://blogs.oracle.com/eschrock/entry/zfs_hot_spares
|
|
elsif ($row[1] =~ /spares/){
|
|
next;
|
|
}
|
|
# the first is a member of a raid array
|
|
# ada2 - - - - - -
|
|
# this second is a single device not in an array
|
|
# ada0s2 25.9G 14.6G 11.3G - 0% 56%
|
|
# gptid/3838f796-5c46-11e6-a931-d05099ac4dc2 - - - - - -
|
|
elsif ($row[1] =~ /^([a-z0-9]+[0-9]+|([\S]+)\/.*)$/ &&
|
|
($row[2] eq '-' || $row[2] =~ /^[0-9\.]+[MGTP]$/ )){
|
|
$row[1] =~ /^([a-z0-9]+[0-9]+|([\S]+)\/.*)\s*(DEGRADED|FAULTED|OFFLINE)?$/;
|
|
my $working = $1;
|
|
my $state = ($3) ? $3 : '';
|
|
if ($working =~ /[\S]+\// && @glabel){
|
|
$working = DiskData::match_glabel($working);
|
|
}
|
|
# kind of a hack, things like cache may not show size/free
|
|
# data since they have no array row, but they might show it in
|
|
# component row:
|
|
# ada0s2 25.9G 19.6G 6.25G - 0% 75%
|
|
if (!$zfs[$j]{'size'} && $row[2] && $row[2] ne '-') {
|
|
$size = ($row[2])? main::translate_size($row[2]): '';
|
|
$zfs[$j]{'arrays'}[$k]{'size'} = $size;
|
|
}
|
|
if (!$zfs[$j]{'allocated'} && $row[3] && $row[3] ne '-') {
|
|
$allocated = ($row[3])? main::translate_size($row[3]): '';
|
|
$zfs[$j]{'arrays'}[$k]{'allocated'} = $allocated;
|
|
}
|
|
if (!$zfs[$j]{'free'} && $row[4] && $row[4] ne '-') {
|
|
$free = ($row[4])? main::translate_size($row[4]): '';
|
|
$zfs[$j]{'arrays'}[$k]{'free'} = $free;
|
|
}
|
|
$zfs[$j]{'arrays'}[$k]{'components'}[$i] = $working . '~' . $state;
|
|
$i++;
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \@zfs;
|
|
# clear out undefined arrrays values
|
|
$j = 0;
|
|
foreach $ref (@zfs){
|
|
my %row = %$ref;
|
|
my $ref2 = $row{'arrays'};
|
|
my @arrays = (ref $ref2 eq 'ARRAY' ) ? @$ref2 : ();
|
|
@arrays = grep {defined $_} @arrays;
|
|
$zfs[$j]{'arrays'} = \@arrays;
|
|
$j++;
|
|
}
|
|
@zfs = zfs_status($zpool,@zfs);
|
|
# print Data::Dumper::Dumper \@zfs;
|
|
eval $end if $b_log;
|
|
return @zfs;
|
|
}
|
|
sub zfs_status {
|
|
eval $start if $b_log;
|
|
my ($zpool,@zfs) = @_;
|
|
my ($cmd,$status,$file,$raid,@arrays,@pool_status,@temp);
|
|
my ($i,$j,$k,$l) = (0,0,0,0);
|
|
foreach my $ref (@zfs){
|
|
my %row = %$ref;
|
|
$i = 0;
|
|
$k = 0;
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-status-1-mirror-main-solestar.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-status-2-mirror-main-solestar.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/raid/zpool-status-tank-1.txt";
|
|
#@pool_status = main::reader($file,'strip');
|
|
$cmd = "$zpool status $row{'id'} 2>/dev/null";
|
|
@pool_status = main::grabber($cmd,"\n",'strip');
|
|
main::log_data('cmd',$cmd) if $b_log;
|
|
my $ref2 = $row{'arrays'};
|
|
@arrays = (ref $ref2 eq 'ARRAY' ) ? @$ref2 : ();
|
|
#print "$row{'id'} rs:$row{'status'}\n";
|
|
$status = ($row{'status'} && $row{'status'} eq 'no-status') ? check_status($row{'id'},@pool_status): $row{'status'};
|
|
$zfs[$j]{'status'} = $status if $status;
|
|
#@arrays = grep {defined $_} @arrays;
|
|
#print "$row{id} $#arrays\n";
|
|
#print Data::Dumper::Dumper \@arrays;
|
|
foreach my $array (@arrays){
|
|
#print 'ref: ', ref $array, "\n";
|
|
#next if ref $array ne 'HASH';
|
|
my %row2 = %$array;
|
|
my $ref3 = $row2{'components'};
|
|
my @components = (ref $ref3 eq 'ARRAY') ? @$ref3 : ();
|
|
$l = 0;
|
|
# zpool status: mirror-0 ONLINE 2 0 0
|
|
$raid = ($row2{'raid'}) ? "$row2{'raid'}-$i": $row2{'raid'};
|
|
$status = ($raid) ? check_status($raid,@pool_status): '';
|
|
$zfs[$j]{'arrays'}[$k]{'status'} = $status;
|
|
#print "$raid i:$i j:$j k:$k $status\n";
|
|
foreach my $component (@components){
|
|
my @temp = split /~/, $component;
|
|
$status = ($temp[0]) ? check_status($temp[0],@pool_status): '';
|
|
$zfs[$j]{'arrays'}[$k]{'components'}[$l] .= $status if $status;
|
|
$l++;
|
|
}
|
|
$k++;
|
|
# haven't seen a raid5/6 type array yet
|
|
$i++ if $row2{'raid'}; # && $row2{'raid'} eq 'mirror';
|
|
}
|
|
$j++;
|
|
}
|
|
eval $end if $b_log;
|
|
return @zfs;
|
|
}
|
|
sub check_status {
|
|
eval $start if $b_log;
|
|
my ($item,@pool_status) = @_;
|
|
my ($status) = ('');
|
|
foreach (@pool_status){
|
|
my @temp = split /\s+/, $_;
|
|
if ($temp[0] eq $item){
|
|
last if !$temp[1];
|
|
$status = $temp[1];
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $status;
|
|
}
|
|
}
|
|
|
|
## RamData
|
|
{
|
|
package RamData;
|
|
|
|
sub get {
|
|
my (@data,@rows,$key1,@ram,$val1);
|
|
my $num = 0;
|
|
my $ref = $alerts{'dmidecode'};
|
|
@rows = main::memory_data_full('ram') if !$b_mem;
|
|
if ( $$ref{'action'} ne 'use'){
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
@data = ({
|
|
main::key($num++,'RAM Report') => '',
|
|
main::key($num++,$key1) => $val1,
|
|
});
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
@ram = dmidecode_data();
|
|
if (@ram){
|
|
@data = create_output(@ram);
|
|
}
|
|
else {
|
|
$key1 = 'message';
|
|
$val1 = main::row_defaults('ram-data');
|
|
@data = ({
|
|
main::key($num++,'RAM Report') => '',
|
|
main::key($num++,$key1) => $val1,
|
|
});
|
|
}
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (@ram) = @_;
|
|
return if !@ram;
|
|
my $num = 0;
|
|
my $j = 0;
|
|
my (@data,@rows);
|
|
foreach (@ram){
|
|
$j = scalar @rows;
|
|
my %ref = %$_;
|
|
$num = 1;
|
|
@data = ({
|
|
main::key($num++,'Array') => '',
|
|
main::key($num++,'capacity') => process_size($ref{'capacity'}),
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($ref{'cap-qualifier'}){
|
|
$rows[$j]{main::key($num++,'note')} = $ref{'cap-qualifier'};
|
|
}
|
|
$rows[$j]{main::key($num++,'slots')} = $ref{'slots'};
|
|
$rows[$j]{main::key($num++,'EC')} = $ref{'eec'};
|
|
if ($extra > 0 ){
|
|
$rows[$j]{main::key($num++,'max module size')} = process_size($ref{'max-module-size'});
|
|
if ($ref{'mod-qualifier'}){
|
|
$rows[$j]{main::key($num++,'note')} = $ref{'mod-qualifier'};
|
|
}
|
|
}
|
|
foreach my $ref2 ($ref{'modules'}){
|
|
my @modules = @$ref2;
|
|
# print Data::Dumper::Dumper \@modules;
|
|
foreach my $ref3 ( @modules){
|
|
$num = 1;
|
|
$j = scalar @rows;
|
|
# multi array setups will start index at next from previous array
|
|
next if ref $ref3 ne 'HASH';
|
|
my %mod = %$ref3;
|
|
$mod{'locator'} ||= 'N/A';
|
|
@data = ({
|
|
main::key($num++,'Device') => $mod{'locator'},
|
|
main::key($num++,'size') => process_size($mod{'size'}),
|
|
});
|
|
@rows = (@rows,@data);
|
|
next if ($mod{'size'} =~ /\D/);
|
|
if ($extra > 1 && $mod{'type'} ){
|
|
$rows[$j]{main::key($num++,'info')} = $mod{'type'};
|
|
}
|
|
$rows[$j]{main::key($num++,'speed')} = $mod{'speed'};
|
|
if ($extra > 0 ){
|
|
$mod{'device-type'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'type')} = $mod{'device-type'};
|
|
if ($extra > 2 && $mod{'device-type'} ne 'N/A'){
|
|
$mod{'device-type-detail'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'detail')} = $mod{'device-type-detail'};
|
|
}
|
|
}
|
|
if ($extra > 2 ){
|
|
$mod{'data-width'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'bus width')} = $mod{'data-width'};
|
|
$mod{'total-width'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'total')} = $mod{'total-width'};
|
|
}
|
|
if ($extra > 1 ){
|
|
$mod{'manufacturer'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'manufacturer')} = $mod{'manufacturer'};
|
|
$mod{'part-number'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'part-no')} = $mod{'part-number'};
|
|
}
|
|
if ($extra > 2 ){
|
|
$mod{'serial'} = main::apply_filter($mod{'serial'});
|
|
$rows[$j]{main::key($num++,'serial')} = $mod{'serial'};
|
|
}
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
|
|
sub dmidecode_data {
|
|
eval $start if $b_log;
|
|
my ($b_5,$handle,@ram,@temp);
|
|
my ($derived_module_size,$max_cap_5,$max_cap_16,$max_module_size) = (0,0,0,0);
|
|
my ($i,$j,$k) = (0,0,0);
|
|
foreach (@dmi){
|
|
my @ref = @$_;
|
|
# Portable Battery
|
|
if ($ref[0] == 5){
|
|
$ram[$k] = ({}) if !$ram[$k];
|
|
foreach my $item (@ref){
|
|
@temp = split /:\s*/, $item;
|
|
next if ! $temp[1];
|
|
if ($temp[0] eq 'Maximum Memory Module Size'){
|
|
$max_module_size = calculate_size($temp[1],$max_module_size);
|
|
$ram[$k]{'max-module-size'} = $max_module_size;
|
|
}
|
|
elsif ($temp[0] eq 'Maximum Total Memory Size'){
|
|
$max_cap_5 = calculate_size($temp[1],$max_cap_5);
|
|
$ram[$k]{'max-capacity-5'} = $max_cap_5;
|
|
}
|
|
elsif ($temp[0] eq 'Memory Module Voltage'){
|
|
$temp[1] =~ s/\s*V.*$//;
|
|
$ram[$k]{'voltage'} = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Associated Memory Slots'){
|
|
$ram[$k]{'slots-5'} = $temp[1];
|
|
}
|
|
}
|
|
$ram[$k]{'modules'} = ([],);
|
|
#print Data::Dumper::Dumper \@ram;
|
|
$b_5 = 1;
|
|
}
|
|
elsif ($ref[0] == 6){
|
|
my ($size,$speed,$type) = (0,0,0);
|
|
foreach my $item (@ref){
|
|
@temp = split /:\s*/, $item;
|
|
next if ! $temp[1];
|
|
if ($temp[0] eq 'Installed Size'){
|
|
# get module size
|
|
|
|
$size = calculate_size($temp[1],0);
|
|
# get data after module size
|
|
$temp[1] =~ s/ Connection\)?//;
|
|
$temp[1] =~ s/^[0-9]+\s*[MGTP]B\s*\(?//;
|
|
$type = lc($temp[1]);
|
|
}
|
|
elsif ($temp[0] eq 'Current Speed'){
|
|
$speed = $temp[1];
|
|
}
|
|
}
|
|
$ram[$k]{'modules'}[$j] = ({
|
|
'size' => $size,
|
|
'speed-ns' => $speed,
|
|
'type' => $type,
|
|
});
|
|
#print Data::Dumper::Dumper \@ram;
|
|
$j++;
|
|
}
|
|
elsif ($ref[0] == 16){
|
|
$handle = $ref[1];
|
|
$ram[$handle] = $ram[$k] if $ram[$k];
|
|
$ram[$k] = undef;
|
|
$ram[$handle] = ({}) if !$ram[$handle];
|
|
foreach my $item (@ref){
|
|
@temp = split /:\s*/, $item;
|
|
next if ! $temp[1];
|
|
if ($temp[0] eq 'Maximum Capacity'){
|
|
$max_cap_16 = calculate_size($temp[1],$max_cap_16);
|
|
$ram[$handle]{'max-capacity-16'} = $max_cap_16;
|
|
}
|
|
# note: these 3 have cleaned data in set_dmidecode_data, so replace stuff manually
|
|
elsif ($temp[0] eq 'Location'){
|
|
$temp[1] =~ s/\sOr\sMotherboard//;
|
|
$temp[1] ||= 'System Board';
|
|
$ram[$handle]{'location'} = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Use'){
|
|
$temp[1] ||= 'System Memory';
|
|
$ram[$handle]{'use'} = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Error Correction Type'){
|
|
$temp[1] ||= 'None';
|
|
$ram[$handle]{'eec'} = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Number Of Devices'){
|
|
$ram[$handle]{'slots-16'} = $temp[1];
|
|
}
|
|
#print "0: $temp[0]\n";
|
|
}
|
|
$ram[$handle]{'derived-module-size'} = 0;
|
|
$ram[$handle]{'device-count-found'} = 0;
|
|
$ram[$handle]{'used-capacity'} = 0;
|
|
#print "s16: $ram[$handle]{'slots-16'}\n";
|
|
}
|
|
elsif ($ref[0] == 17){
|
|
my ($bank_locator,$configured_clock_speed,$data_width) = ('','','');
|
|
my ($device_type,$device_type_detail,$form_factor,$locator,$main_locator) = ('','','','','');
|
|
my ($manufacturer,$part_number,$serial,$speed,$total_width) = ('','','','','');
|
|
my ($device_size,$i_data,$i_total,$working_size) = (0,0,0,0);
|
|
foreach my $item (@ref){
|
|
@temp = split /:\s*/, $item;
|
|
next if ! $temp[1];
|
|
if ($temp[0] eq 'Array Handle'){
|
|
$handle = hex($temp[1]);
|
|
}
|
|
elsif ($temp[0] eq 'Data Width'){
|
|
$data_width = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Total Width'){
|
|
$total_width = $temp[1];
|
|
}
|
|
# do not try to guess from installed modules, only use this to correct type 5 data
|
|
elsif ($temp[0] eq 'Size'){
|
|
# we want any non real size data to be preserved
|
|
if ( $temp[1] =~ /^[0-9]+\s*[MTPG]B/ ) {
|
|
$derived_module_size = calculate_size($temp[1],$derived_module_size);
|
|
$working_size = calculate_size($temp[1],0);
|
|
$device_size = $working_size;
|
|
}
|
|
else {
|
|
$device_size = $temp[1];
|
|
}
|
|
}
|
|
elsif ($temp[0] eq 'Locator'){
|
|
$temp[1] =~ s/RAM slot #/Slot/;
|
|
$locator = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Bank Locator'){
|
|
$bank_locator = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Form Factor'){
|
|
$form_factor = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Type'){
|
|
$device_type = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Type Detail'){
|
|
$device_type_detail = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Speed'){
|
|
$speed = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Configured Clock Speed'){
|
|
$configured_clock_speed = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Manufacturer'){
|
|
$temp[1] = main::dmi_cleaner($temp[1]);
|
|
$manufacturer = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Part Number'){
|
|
$temp[1] =~ s/(^[0]+$||.*Module.*|Undefined.*|PartNum.*|\[Empty\]|^To be filled.*)//g;
|
|
$part_number = $temp[1];
|
|
}
|
|
elsif ($temp[0] eq 'Serial Number'){
|
|
$temp[1] =~ s/(^[0]+$|Undefined.*|SerNum.*|\[Empty\]|^To be filled.*)//g;
|
|
$serial = $temp[1];
|
|
}
|
|
}
|
|
# because of the wide range of bank/slot type data, we will just use
|
|
# the one that seems most likely to be right. Some have: Bank: SO DIMM 0 slot: J6A
|
|
# so we dump the useless data and use the one most likely to be visibly correct
|
|
if ( $bank_locator =~ /DIMM/ ) {
|
|
$main_locator = $bank_locator;
|
|
}
|
|
else {
|
|
$main_locator = $locator;
|
|
}
|
|
if ($working_size =~ /^[0-9][0-9]+$/) {
|
|
$ram[$handle]{'device-count-found'}++;
|
|
# build up actual capacity found for override tests
|
|
$ram[$handle]{'used-capacity'} += $working_size;
|
|
}
|
|
# sometimes the data is just wrong, they reverse total/data. data I believe is
|
|
# used for the actual memory bus width, total is some synthetic thing, sometimes missing.
|
|
# note that we do not want a regular string comparison, because 128 bit memory buses are
|
|
# in our future, and 128 bits < 64 bits with string compare
|
|
$data_width =~ /(^[0-9]+).*/;
|
|
$i_data = $1;
|
|
$total_width =~ /(^[0-9]+).*/;
|
|
$i_total = $1;
|
|
if ($i_data && $i_total && $i_data > $i_total){
|
|
my $temp_width = $data_width;
|
|
$data_width = $total_width;
|
|
$total_width = $temp_width;
|
|
}
|
|
$ram[$handle]{'derived-module-size'} = $derived_module_size;
|
|
$ram[$handle]{'modules'}[$i]{'configured-clock-speed'} = $configured_clock_speed;
|
|
$ram[$handle]{'modules'}[$i]{'data-width'} = $data_width;
|
|
$ram[$handle]{'modules'}[$i]{'size'} = $device_size;
|
|
$ram[$handle]{'modules'}[$i]{'device-type'} = $device_type;
|
|
$ram[$handle]{'modules'}[$i]{'device-type-detail'} = lc($device_type_detail);
|
|
$ram[$handle]{'modules'}[$i]{'form-factor'} = $form_factor;
|
|
$ram[$handle]{'modules'}[$i]{'locator'} = $main_locator;
|
|
$ram[$handle]{'modules'}[$i]{'manufacturer'} = $manufacturer;
|
|
$ram[$handle]{'modules'}[$i]{'part-number'} = $part_number;
|
|
$ram[$handle]{'modules'}[$i]{'serial'} = $serial;
|
|
$ram[$handle]{'modules'}[$i]{'speed'} = $speed;
|
|
$ram[$handle]{'modules'}[$i]{'total-width'} = $total_width;
|
|
$i++
|
|
}
|
|
elsif ($ref[0] < 17 ){
|
|
next;
|
|
}
|
|
elsif ($ref[0] > 17 ){
|
|
last;
|
|
}
|
|
}
|
|
@ram = data_processor(@ram) if @ram;
|
|
main::log_data('dump','@ram',\@ram) if $b_log;
|
|
# print Data::Dumper::Dumper \@ram;
|
|
eval $end if $b_log;
|
|
return @ram;
|
|
}
|
|
sub data_processor {
|
|
eval $start if $b_log;
|
|
my (@ram) = @_;
|
|
my $b_debug = 0;
|
|
my (@return,@temp);
|
|
my $est = 'est.';
|
|
|
|
foreach (@ram){
|
|
# because we use the actual array handle as the index,
|
|
# there will be many undefined keys
|
|
next if ! defined $_;
|
|
my %ref = %$_;
|
|
my ($max_cap,$max_mod_size) = (0,0);
|
|
my ($alt_cap,$est_cap,$est_mod,$unit) = (0,'','','');
|
|
$max_cap = $ref{'max-capacity-16'};
|
|
# make sure they are integers not string if empty
|
|
$ref{'slots-5'} ||= 0;
|
|
$ref{'slots-16'} ||= 0;
|
|
$ref{'max-capacity-5'} ||= 0;
|
|
$ref{'max-module-size'} ||= 0;
|
|
#$ref{'max-module-size'} = 0;# debugger
|
|
# 1: if max cap 1 is null, and max cap 2 not null, use 2
|
|
if ($b_debug){
|
|
print "1: mms: $ref{'max-module-size'} :dms: $ref{'derived-module-size'} :mc: $max_cap :uc: $ref{'used-capacity'}\n";
|
|
print "1a: s5: $ref{'slots-5'} s16: $ref{'slots-16'}\n";
|
|
}
|
|
if (!$max_cap && $ref{'max-capacity-5'}) {
|
|
$max_cap = $ref{'max-capacity-5'};
|
|
}
|
|
if ($b_debug){
|
|
print "2: mms: $ref{'max-module-size'} :dms: $ref{'derived-module-size'} :mc: $max_cap :uc: $ref{'used-capacity'}\n";
|
|
}
|
|
# 2: now check to see if actually found module sizes are > than listed max module, replace if >
|
|
if ( $ref{'max-module-size'} && $ref{'derived-module-size'} &&
|
|
$ref{'derived-module-size'} > $ref{'max-module-size'} ){
|
|
$ref{'max-module-size'} = $ref{'derived-module-size'};
|
|
$est_mod = $est;
|
|
}
|
|
if ($b_debug){
|
|
print "3: dcf: $ref{'device-count-found'} :dms: $ref{'derived-module-size'} :mc: $max_cap :uc: $ref{'used-capacity'}\n";
|
|
}
|
|
# note: some cases memory capacity == max module size, so one stick will fill it
|
|
# but I think only with cases of 2 slots does this happen, so if > 2, use the count of slots.
|
|
if ($max_cap && ($ref{'device-count-found'} || $ref{'slots-16'}) ){
|
|
# first check that actual memory found is not greater than listed max cap, or
|
|
# checking to see module count * max mod size is not > used capacity
|
|
if ($ref{'used-capacity'} && $ref{'max-capacity-16'}){
|
|
if ($ref{'used-capacity'} > $max_cap){
|
|
if ($ref{'max-module-size'} &&
|
|
$ref{'used-capacity'} < ($ref{'slots-16'} * $ref{'max-module-size'} )){
|
|
$max_cap = $ref{'slots-16'} * $ref{'max-module-size'};
|
|
$est_cap = $est;
|
|
print "A\n" if $b_debug;
|
|
}
|
|
elsif ($ref{'derived-module-size'} &&
|
|
$ref{'used-capacity'} < ($ref{'slots-16'} * $ref{'derived-module-size'}) ){
|
|
$max_cap = $ref{'slots-16'} * $ref{'derived-module-size'};
|
|
$est_cap = $est;
|
|
print "B\n" if $b_debug;
|
|
}
|
|
else {
|
|
$max_cap = $ref{'used-capacity'};
|
|
$est_cap = $est;
|
|
print "C\n" if $b_debug;
|
|
}
|
|
}
|
|
}
|
|
# note that second case will never really activate except on virtual machines and maybe
|
|
# mobile devices
|
|
if (!$est_cap){
|
|
# do not do this for only single modules found, max mod size can be equal to the array size
|
|
if ($ref{'slots-16'} > 1 && $ref{'device-count-found'} > 1 &&
|
|
$max_cap < ($ref{'derived-module-size'} * $ref{'slots-16'} ) ){
|
|
$max_cap = $ref{'derived-module-size'} * $ref{'slots-16'};
|
|
$est_cap = $est;
|
|
print "D\n" if $b_debug;
|
|
}
|
|
elsif ($ref{'device-count-found'} > 0 && $max_cap < ( $ref{'derived-module-size'} * $ref{'device-count-found'} )){
|
|
$max_cap = $ref{'derived-module-size'} * $ref{'device-count-found'};
|
|
$est_cap = $est;
|
|
print "E\n" if $b_debug;
|
|
}
|
|
## handle cases where we have type 5 data: mms x device count equals type 5 max cap
|
|
# however do not use it if cap / devices equals the derived module size
|
|
elsif ($ref{'max-module-size'} > 0 &&
|
|
($ref{'max-module-size'} * $ref{'slots-16'}) == $ref{'max-capacity-5'} &&
|
|
$ref{'max-capacity-5'} != $ref{'max-capacity-16'} &&
|
|
$ref{'derived-module-size'} != ($ref{'max-capacity-16'}/$ref{'slots-16'}) ){
|
|
$max_cap = $ref{'max-capacity-5'};
|
|
$est_cap = $est;
|
|
print "F\n" if $b_debug;
|
|
}
|
|
|
|
}
|
|
if ($b_debug){
|
|
print "4: mms: $ref{'max-module-size'} :dms: $ref{'derived-module-size'} :mc: $max_cap :uc: $ref{'used-capacity'}\n";
|
|
}
|
|
# some cases of type 5 have too big module max size, just dump the data then since
|
|
# we cannot know if it is valid or not, and a guess can be wrong easily
|
|
if ($ref{'max-module-size'} && $max_cap && $ref{'max-module-size'} > $max_cap){
|
|
$ref{'max-module-size'} = 0;
|
|
}
|
|
if ($b_debug){
|
|
print "5: dms: $ref{'derived-module-size'} :s16: $ref{'slots-16'} :mc: $max_cap\n";
|
|
}
|
|
|
|
# now prep for rebuilding the ram array data
|
|
if (!$ref{'max-module-size'}){
|
|
# ie: 2x4gB
|
|
if (!$est_cap && $ref{'derived-module-size'} > 0 && $max_cap > ($ref{'derived-module-size'} * $ref{'slots-16'} * 4) ){
|
|
$est_cap = 'check';
|
|
print "G\n" if $b_debug;
|
|
}
|
|
if ($max_cap && ($ref{'slots-16'} || $ref{'slots-5'})){
|
|
my $slots = 0;
|
|
if ($ref{'slots-16'} && $ref{'slots-16'} >= $ref{'slots-5'}){
|
|
$slots = $ref{'slots-16'};
|
|
}
|
|
elsif ($ref{'slots-5'} && $ref{'slots-5'} > $ref{'slots-16'}){
|
|
$slots = $ref{'slots-5'};
|
|
}
|
|
if ($ref{'derived-module-size'} * $slots > $max_cap){
|
|
$ref{'max-module-size'} = $ref{'derived-module-size'};
|
|
}
|
|
else {
|
|
$ref{'max-module-size'} = sprintf("%.f",$max_cap/$slots);
|
|
}
|
|
$est_mod = $est;
|
|
}
|
|
}
|
|
# case where listed max cap is too big for actual slots x max cap, eg:
|
|
# listed max cap, 8gb, max mod 2gb, slots 2
|
|
else {
|
|
if (!$est_cap && $ref{'max-module-size'} > 0){
|
|
if ($max_cap > ( $ref{'max-module-size'} * $ref{'slots-16'})){
|
|
$est_cap = 'check';
|
|
print "H\n" if $b_debug;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
@temp = ({
|
|
'capacity' => $max_cap,
|
|
'cap-qualifier' => $est_cap,
|
|
'eec' => $ref{'eec'},
|
|
'location' => $ref{'location'},
|
|
'max-module-size' => $ref{'max-module-size'},
|
|
'mod-qualifier' => $est_mod,
|
|
'modules' => $ref{'modules'},
|
|
'slots' => $ref{'slots-16'},
|
|
'use' => $ref{'use'},
|
|
'voltage' => $ref{'voltage'},
|
|
});
|
|
@return = (@return,@temp);
|
|
}
|
|
eval $end if $b_log;
|
|
return @return;
|
|
}
|
|
sub process_size {
|
|
my ($size) = @_;
|
|
my ($b_trim,$unit) = (0,'');
|
|
return 'N/A' if ( ! $size );
|
|
return $size if $size =~ /\D/;
|
|
if ( $size < 1024 ){
|
|
$unit='MiB';
|
|
}
|
|
elsif ( $size < 1024000 ){
|
|
$size = $size / 1024;
|
|
$unit='GiB';
|
|
$b_trim = 1;
|
|
}
|
|
elsif ( $size < 1024000000 ){
|
|
$size = $size / 1024000;
|
|
$unit='TiB';
|
|
$b_trim = 1;
|
|
}
|
|
# we only want a max 2 decimal places, and only when it's
|
|
# a unit > MB
|
|
$size = sprintf("%.2f",$size) if $b_trim;
|
|
$size =~ s/\.[0]+$//;
|
|
$size = "$size $unit";
|
|
return $size;
|
|
}
|
|
sub calculate_size {
|
|
my ($data, $size) = @_;
|
|
if ( $data =~ /^[0-9]+\s*[GMTP]B/) {
|
|
if ( $data =~ /([0-9]+)\s*GB/ ) {
|
|
$data = $1 * 1024;
|
|
}
|
|
elsif ( $data =~ /([0-9]+)\s*MB/ ) {
|
|
$data = $1;
|
|
}
|
|
elsif ( $data =~ /([0-9]+)\s*TB/ ) {
|
|
$data = $1 * 1024 * 1000;
|
|
}
|
|
elsif ( $data =~ /([0-9]+)\s*PB/ ) {
|
|
$data = $1 * 1024 * 1000 * 1000;
|
|
}
|
|
if ($data =~ /^[0-9][0-9]+$/ && $data > $size ) {
|
|
$size=$data;
|
|
}
|
|
}
|
|
else {
|
|
$size = 0;
|
|
}
|
|
return $size;
|
|
}
|
|
}
|
|
|
|
## RepoData
|
|
{
|
|
package RepoData;
|
|
|
|
# easier to keep these package global, but undef after done
|
|
my (@dbg_files,$debugger_dir);
|
|
my $num = 0;
|
|
sub get {
|
|
eval $start if $b_log;
|
|
($debugger_dir) = @_;
|
|
my (@data,@rows);
|
|
if ($bsd_type){
|
|
@rows = get_repos_bsd();
|
|
}
|
|
else {
|
|
@rows = get_repos_linux();
|
|
}
|
|
if ($debugger_dir){
|
|
@rows = @dbg_files;
|
|
undef @dbg_files;
|
|
undef $debugger_dir;
|
|
}
|
|
else {
|
|
if (!@rows){
|
|
my $pm = (!$bsd_type) ? 'package manager': 'OS type';
|
|
@data = (
|
|
{main::key($num++,'Alert') => "No repo data detected. Does $self_name support your $pm?"},
|
|
);
|
|
@rows = (@data);
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub get_repos_linux {
|
|
eval $start if $b_log;
|
|
my (@content,@data,@data2,@data3,@files,$repo,@repos,@rows);
|
|
my ($key,$path);
|
|
my $apk = '/etc/apk/repositories';
|
|
my $apt = '/etc/apt/sources.list';
|
|
my $eopkg_dir = '/var/lib/eopkg/';
|
|
my $pacman = '/etc/pacman.conf';
|
|
my $pacman_g2 = '/etc/pacman-g2.conf';
|
|
my $pisi_dir = '/etc/pisi/';
|
|
my $portage_dir = '/etc/portage/repos.conf/';
|
|
my $slackpkg = '/etc/slackpkg/mirrors';
|
|
my $slackpkg_plus = '/etc/slackpkg/slackpkgplus.conf';
|
|
my $yum_conf = '/etc/yum.conf';
|
|
my $yum_repo_dir = '/etc/yum.repos.d/';
|
|
my $zypp_repo_dir = '/etc/zypp/repos.d/';
|
|
my $b_test = 0;
|
|
# apt - debian, buntus, also sometimes some yum/rpm repos may create
|
|
# apt repos here as well
|
|
if (-f $apt || -d "$apt.d"){
|
|
my ($apt_arch,$apt_comp,$apt_suites,$apt_types,@apt_urls,@apt_working,
|
|
$b_apt_enabled,$file,$string);
|
|
my $counter = 0;
|
|
@files = main::globber('/etc/apt/sources.list.d/*.list');
|
|
push @files, $apt;
|
|
main::log_data('data',"apt repo files:\n" . main::joiner(\@files, "\n", 'unset') ) if $b_log;
|
|
foreach ( sort @files){
|
|
@data = repo_builder($_,'apt','^\s*deb') if -r $_;
|
|
@rows = (@rows,@data);
|
|
}
|
|
#@files = main::globber("$ENV{'HOME'}/bin/scripts/inxi/data/repo/apt/*.sources");
|
|
@files = main::globber('/etc/apt/sources.list.d/*.sources');
|
|
main::log_data('data',"apt deb822 repo files:\n" . main::joiner(\@files, "\n", 'unset') ) if $b_log;
|
|
foreach $file (@files){
|
|
@data2 = main::reader($file,'strip');
|
|
my $count = scalar @data2;
|
|
push @dbg_files, $file if $debugger_dir;
|
|
#print "$file\n";
|
|
@apt_urls = ();
|
|
@apt_working = ();
|
|
$counter = 0;
|
|
$b_apt_enabled = 1;
|
|
foreach my $row (@data2){
|
|
$counter++;
|
|
next if $row =~ /^\s*$|^\s*#/;
|
|
#print "row:$row\n";
|
|
if ($row =~ /^Types:\s*(.*)/){
|
|
my $type_holder= $1;
|
|
#print "ath:$type_holder\n";
|
|
if ($apt_types && @apt_working){
|
|
if ($b_apt_enabled){
|
|
#print "1: url builder\n";
|
|
foreach $repo (@apt_working){
|
|
$string = $apt_types;
|
|
$string .= ' [arch=' . $apt_arch . ']' if $apt_arch;
|
|
$string .= ' ' . $repo;
|
|
$string .= ' ' . $apt_suites if $apt_suites ;
|
|
$string .= ' ' . $apt_comp if $apt_comp;
|
|
|
|
#print "s1:$string\n";
|
|
push @data3, $string;
|
|
}
|
|
}
|
|
#print join "\n",@data3,"\n";
|
|
@apt_urls = (@apt_urls,@data3);
|
|
@data3 = ();
|
|
@apt_working = ();
|
|
$apt_arch = '';
|
|
$apt_comp = '';
|
|
$apt_suites = '';
|
|
$apt_types = '';
|
|
}
|
|
$apt_types = $type_holder;
|
|
$b_apt_enabled = 1;
|
|
}
|
|
if ($row =~ /^Enabled:\s*(.*)/){
|
|
my $status = $1;
|
|
$b_apt_enabled = ($status =~ /no/i) ? 0: 1;
|
|
}
|
|
if ($row =~ /:\//){
|
|
my $url = $row;
|
|
$url =~ s/^URIs:\s*//;
|
|
push @apt_working, $url if $url;
|
|
}
|
|
if ($row =~ /^Suites:\s*(.*)/){
|
|
$apt_suites = $1;
|
|
}
|
|
if ($row =~ /^Components:\s*(.*)/){
|
|
$apt_comp = $1;
|
|
}
|
|
if ($row =~ /^Architectures:\s*(.*)/){
|
|
$apt_arch = $1;
|
|
}
|
|
# we've hit the last line!!
|
|
if ($counter == $count && @apt_working){
|
|
#print "2: url builder\n";
|
|
if ($b_apt_enabled){
|
|
foreach $repo (@apt_working){
|
|
my $string = $apt_types;
|
|
$string .= ' [arch=' . $apt_arch . ']' if $apt_arch;
|
|
$string .= ' ' . $repo;
|
|
$string .= ' ' . $apt_suites if $apt_suites ;
|
|
$string .= ' ' . $apt_comp if $apt_comp;
|
|
#print "s2:$string\n";
|
|
push @data3, $string;
|
|
}
|
|
}
|
|
#print join "\n",@data3,"\n";
|
|
@apt_urls = (@apt_urls,@data3);
|
|
@data3 = ();
|
|
@apt_working = ();
|
|
$apt_arch = '';
|
|
$apt_comp = '';
|
|
$apt_suites = '';
|
|
$apt_types = '';
|
|
}
|
|
}
|
|
if (@apt_urls){
|
|
$key = repo_builder('active','apt');
|
|
@apt_urls = url_cleaner(@apt_urls);
|
|
}
|
|
else {
|
|
$key = repo_builder('missing','apt');
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $file},
|
|
[@apt_urls],
|
|
);
|
|
@rows = (@rows,@data);
|
|
}
|
|
@files = ();
|
|
}
|
|
# pacman: Arch and derived
|
|
if (-f $pacman || -f $pacman_g2){
|
|
$repo = 'pacman';
|
|
if (-f $pacman_g2 ){
|
|
$pacman = $pacman_g2;
|
|
$repo = 'pacman-g2';
|
|
}
|
|
@files = main::reader($pacman,'strip');
|
|
if (@files){
|
|
@repos = grep {/^\s*Server/i} @files;
|
|
@files = grep {/^\s*Include/i} @files;
|
|
}
|
|
if (@files){
|
|
@files = map {
|
|
my @working = split( /\s+=\s+/, $_);
|
|
$working[1];
|
|
} @files;
|
|
}
|
|
@files = sort(@files);
|
|
@files = main::uniq(@files);
|
|
unshift @files, $pacman if @repos;
|
|
foreach (@files){
|
|
if (-f $_){
|
|
@data = repo_builder($_,$repo,'^\s*Server','\s*=\s*',1);
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
# set it so the debugger knows the file wasn't there
|
|
push @dbg_files, $_ if $debugger_dir;
|
|
@data = (
|
|
{main::key($num++,'File listed in') => $pacman},
|
|
[("$_ does not seem to exist.")],
|
|
);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
if (!@rows){
|
|
@data = (
|
|
{main::key($num++,repo_builder('missing','no-files')) => $pacman },
|
|
);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
# slackware
|
|
if (-f $slackpkg || -f $slackpkg_plus){
|
|
#$slackpkg = "$ENV{HOME}/bin/scripts/inxi/data/repo/slackware/slackpkg-2.conf";
|
|
if (-f $slackpkg){
|
|
@data = repo_builder($slackpkg,'slackpkg','^[[:space:]]*[^#]+');
|
|
@rows = (@rows,@data);
|
|
}
|
|
if (-f $slackpkg_plus){
|
|
push @dbg_files, $slackpkg_plus if $debugger_dir;
|
|
@data = main::reader($slackpkg_plus,'strip');
|
|
my (@repoplus_list,$active_repos);
|
|
foreach my $row (@data){
|
|
@data2 = split /\s*=\s*/, $row;
|
|
@data2 = map { $_ =~ s/^\s+|\s+$//g ; $_ } @data2;
|
|
last if $data2[0] =~ /^SLACKPKGPLUS/ && $data2[1] eq 'off';
|
|
# REPOPLUS=( slackpkgplus restricted alienbob ktown multilib slacky)
|
|
if ($data2[0] =~ /^REPOPLUS/){
|
|
@repoplus_list = split /\s+/, $data2[1];
|
|
@repoplus_list = map {s/\(|\)//g; $_} @repoplus_list;
|
|
$active_repos = join ('|',@repoplus_list);
|
|
|
|
}
|
|
# MIRRORPLUS['multilib']=http://taper.alienbase.nl/mirrors/people/alien/multilib/14.1/
|
|
if ($active_repos && $data2[0] =~ /^MIRRORPLUS/){
|
|
$data2[0] =~ s/MIRRORPLUS\[\'|\'\]//g;
|
|
if ($data2[0] =~ /$active_repos/){
|
|
push @content,"$data2[0] ~ $data2[1]";
|
|
}
|
|
}
|
|
}
|
|
if (! @content){
|
|
$key = repo_builder('missing','slackpkg+');
|
|
}
|
|
else {
|
|
@content = url_cleaner(@content);
|
|
$key = repo_builder('active','slackpkg+');
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $slackpkg_plus},
|
|
[@content],
|
|
);
|
|
@data = url_cleaner(@data);
|
|
@rows = (@rows,@data);
|
|
@content = ();
|
|
}
|
|
}
|
|
# redhat/suse
|
|
if (-d $yum_repo_dir || -f $yum_conf || -d $zypp_repo_dir){
|
|
if (-d $yum_repo_dir || -f $yum_conf){
|
|
@files = main::globber("$yum_repo_dir*.repo");
|
|
push @files, $yum_conf if -f $yum_conf;
|
|
$repo = 'yum';
|
|
}
|
|
elsif (-d $zypp_repo_dir){
|
|
@files = main::globber("$zypp_repo_dir*.repo");
|
|
main::log_data('data',"zypp repo files:\n" . main::joiner(\@files, "\n", 'unset')) if $b_log;
|
|
$repo = 'zypp';
|
|
}
|
|
#$repo = 'yum';
|
|
#push @files, "$ENV{'HOME'}/bin/scripts/inxi/data/repo/yum/rpmfusion-nonfree-1.repo";
|
|
if (@files){
|
|
foreach (sort @files){
|
|
@data2 = main::reader($_);
|
|
push @dbg_files, $_ if $debugger_dir;
|
|
my ($enabled,$url,$title) = (undef,'','');
|
|
foreach my $line (@data2){
|
|
# this is a hack, assuming that each item has these fields listed, we collect the 3
|
|
# items one by one, then when the url/enabled fields are set, we print it out and
|
|
# reset the data. Not elegant but it works. Note that if enabled was not present
|
|
# we assume it is enabled then, and print the line, reset the variables. This will
|
|
# miss the last item, so it is printed if found in END
|
|
if ($line =~ /^\[(.+)\]/){
|
|
my $temp = $1;
|
|
if ($url && $title && defined $enabled){
|
|
if ($enabled > 0){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
($enabled,$url,$title) = (undef,'','');
|
|
}
|
|
$title = $temp;
|
|
}
|
|
# Note: it looks like enabled comes before url
|
|
elsif ($line =~ /^(metalink|mirrorlist|baseurl)\s*=\s*(.*)/){
|
|
$url = $2;
|
|
}
|
|
# note: enabled = 1. enabled = 0 means disabled
|
|
elsif ($line =~ /^enabled\s*=\s*([01])/){
|
|
$enabled = $1;
|
|
}
|
|
# print out the line if all 3 values are found, otherwise if a new
|
|
# repoTitle is hit above, it will print out the line there instead
|
|
if ($url && $title && defined $enabled){
|
|
if ($enabled > 0){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
($enabled,$url,$title) = (0,'','');
|
|
}
|
|
}
|
|
# print the last one if there is data for it
|
|
if ($url && $title && $enabled){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
|
|
if (! @content){
|
|
$key = repo_builder('missing',$repo);
|
|
}
|
|
else {
|
|
@content = url_cleaner(@content);
|
|
$key = repo_builder('active',$repo);
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $_},
|
|
[@content],
|
|
);
|
|
@rows = (@rows,@data);
|
|
@content = ();
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \@rows;
|
|
}
|
|
# gentoo
|
|
if (-d $portage_dir && main::check_program('emerge')){
|
|
@files = main::globber("$portage_dir*.conf");
|
|
$repo = 'portage';
|
|
if (@files){
|
|
foreach (sort @files){
|
|
@data2 = main::reader($_);
|
|
push @dbg_files, $_ if $debugger_dir;
|
|
my ($enabled,$url,$title) = (undef,'','');
|
|
foreach my $line (@data2){
|
|
# this is a hack, assuming that each item has these fields listed, we collect the 3
|
|
# items one by one, then when the url/enabled fields are set, we print it out and
|
|
# reset the data. Not elegant but it works. Note that if enabled was not present
|
|
# we assume it is enabled then, and print the line, reset the variables. This will
|
|
# miss the last item, so it is printed if found in END
|
|
if ($line =~ /^\[(.+)\]/){
|
|
my $temp = $1;
|
|
if ($url && $title && defined $enabled){
|
|
if ($enabled > 0){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
($enabled,$url,$title) = (undef,'','');
|
|
}
|
|
$title = $temp;
|
|
}
|
|
elsif ($line =~ /^(sync-uri)\s*=\s*(.*)/){
|
|
$url = $2;
|
|
}
|
|
# note: enabled = 1. enabled = 0 means disabled
|
|
elsif ($line =~ /^auto-sync\s*=\s*([01])/){
|
|
$enabled = $1;
|
|
}
|
|
# print out the line if all 3 values are found, otherwise if a new
|
|
# repoTitle is hit above, it will print out the line there instead
|
|
if ($url && $title && defined $enabled){
|
|
if ($enabled > 0){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
($enabled,$url,$title) = (undef,'','');
|
|
}
|
|
}
|
|
# print the last one if there is data for it
|
|
if ($url && $title && $enabled){
|
|
push @content, "$title ~ $url";
|
|
}
|
|
if (! @content){
|
|
$key = repo_builder('missing','portage');
|
|
}
|
|
else {
|
|
@content = url_cleaner(@content);
|
|
$key = repo_builder('active','portage');
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $_},
|
|
[@content],
|
|
);
|
|
@rows = (@rows,@data);
|
|
@content = ();
|
|
}
|
|
}
|
|
}
|
|
# Alpine linux
|
|
if (-f $apk){
|
|
@data = repo_builder($apk,'apk','^\s*[^#]+');
|
|
@rows = (@rows,@data);
|
|
}
|
|
# Mandriva/Mageia using: urpmq
|
|
if ( $path = main::check_program('urpmq') ){
|
|
@data2 = main::grabber("$path --list-media active --list-url","\n",'strip');
|
|
main::writer("$debugger_dir/system-repo-data-urpmq.txt",@data2) if $debugger_dir;
|
|
# now we need to create the structure: repo info: repo path
|
|
# we do that by looping through the lines of the output and then
|
|
# putting it back into the <data>:<url> format print repos expects to see
|
|
# note this structure in the data, so store first line and make start of line
|
|
# then when it's an http line, add it, and create the full line collection.
|
|
# Contrib ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/2011/x86_64/media/contrib/release
|
|
# Contrib Updates ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/2011/x86_64/media/contrib/updates
|
|
# Non-free ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/2011/x86_64/media/non-free/release
|
|
# Non-free Updates ftp://ftp.uwsg.indiana.edu/linux/mandrake/official/2011/x86_64/media/non-free/updates
|
|
# Nonfree Updates (Local19) /mnt/data/mirrors/mageia/distrib/cauldron/x86_64/media/nonfree/updates
|
|
foreach (@data2){
|
|
# need to dump leading/trailing spaces and clear out color codes for irc output
|
|
$_ =~ s/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g;
|
|
$_ =~ s/\e\[([0-9];)?[0-9]+m//g;
|
|
# urpmq output is the same each line, repo name space repo url, can be:
|
|
# rsync://, ftp://, file://, http:// OR repo is locally mounted on FS in some cases
|
|
if (/(.+)\s([\S]+:\/\/.+)/){
|
|
# pack the repo url
|
|
push @content, $1;
|
|
@content = url_cleaner(@content);
|
|
# get the repo
|
|
$repo = $2;
|
|
@data = (
|
|
{main::key($num++,'urpmq repo') => $repo},
|
|
[@content],
|
|
);
|
|
@rows = (@rows,@data);
|
|
@content = ();
|
|
}
|
|
}
|
|
}
|
|
# Pardus/Solus
|
|
if ( (-d $pisi_dir && ( $path = main::check_program('pisi') ) ) ||
|
|
(-d $eopkg_dir && ( $path = main::check_program('eopkg') ) ) ){
|
|
#$path = 'eopkg';
|
|
my $which = ($path =~ /pisi$/) ? 'pisi': 'eopkg';
|
|
my $cmd = ($which eq 'pisi') ? "$path list-repo": "$path lr";
|
|
#my $file = "$ENV{HOME}/bin/scripts/inxi/data/repo/solus/eopkg-2.txt";
|
|
#@data2 = main::reader($file,'strip');
|
|
@data2 = main::grabber("$cmd 2>/dev/null","\n",'strip');
|
|
main::writer("$debugger_dir/system-repo-data-$which.txt",@data2) if $debugger_dir;
|
|
# now we need to create the structure: repo info: repo path
|
|
# we do that by looping through the lines of the output and then
|
|
# putting it back into the <data>:<url> format print repos expects to see
|
|
# note this structure in the data, so store first line and make start of line
|
|
# then when it's an http line, add it, and create the full line collection.
|
|
# Pardus-2009.1 [Aktiv]
|
|
# http://packages.pardus.org.tr/pardus-2009.1/pisi-index.xml.bz2
|
|
# Contrib [Aktiv]
|
|
# http://packages.pardus.org.tr/contrib-2009/pisi-index.xml.bz2
|
|
# Solus [inactive]
|
|
# https://packages.solus-project.com/shannon/eopkg-index.xml.xz
|
|
foreach (@data2){
|
|
next if /^\s*$/;
|
|
# need to dump leading/trailing spaces and clear out color codes for irc output
|
|
$_ =~ s/\x1B\[([0-9]{1,2}(;[0-9]{1,2})?)?[m|K]//g;
|
|
$_ =~ s/\e\[([0-9];)?[0-9]+m//g;
|
|
if (/^\/|:\/\//){
|
|
push @content, $_ if $repo;
|
|
}
|
|
# Local [inactive] Unstable [active]
|
|
elsif ( /^(.*)\s\[([\S]+)\]/){
|
|
$repo = $1;
|
|
$repo = ($2 =~ /^activ/i) ? $repo : '';
|
|
}
|
|
if ($repo && @content){
|
|
@content = url_cleaner(@content);
|
|
$key = repo_builder('active',$which);
|
|
@data = (
|
|
{main::key($num++,$key) => $repo},
|
|
[@content],
|
|
);
|
|
@rows = (@rows,@data);
|
|
$repo = '';
|
|
@content = ();
|
|
}
|
|
}
|
|
# last one if present
|
|
if ($repo && @content){
|
|
@content = url_cleaner(@content);
|
|
$key = repo_builder('active',$which);
|
|
@data = (
|
|
{main::key($num++,$key) => $repo},
|
|
[@content],
|
|
);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
# print Dumper \@rows;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub get_repos_bsd {
|
|
eval $start if $b_log;
|
|
my (@content,@data,@data2,@data3,@files,@rows);
|
|
my ($key);
|
|
my $bsd_pkg = '/usr/local/etc/pkg/repos/';
|
|
my $freebsd = '/etc/freebsd-update.conf';
|
|
my $freebsd_pkg = '/etc/pkg/FreeBSD.conf';
|
|
my $netbsd = '/usr/pkg/etc/pkgin/repositories.conf';
|
|
my $openbsd = '/etc/pkg.conf';
|
|
my $openbsd2 = '/etc/installurl';
|
|
my $portsnap = '/etc/portsnap.conf';
|
|
if ( -f $portsnap || -f $freebsd || -d $bsd_pkg){
|
|
if ( -f $portsnap ) {
|
|
@data = repo_builder($portsnap,'portsnap','^\s*SERVERNAME','\s*=\s*',1);
|
|
@rows = (@rows,@data);
|
|
}
|
|
if ( -f $freebsd ){
|
|
@data = repo_builder($freebsd,'freebsd','^\s*ServerName','\s+',1);
|
|
@rows = (@rows,@data);
|
|
}
|
|
# if ( -f $freebsd_pkg ){
|
|
# @data = repo_builder($freebsd_pkg,'freebsd-pkg','^\s*url',':\s+',1);
|
|
# @rows = (@rows,@data);
|
|
# }
|
|
if ( -d $bsd_pkg || -f $freebsd_pkg){
|
|
@files = main::globber('/usr/local/etc/pkg/repos/*.conf');
|
|
push @files, $freebsd_pkg if -f $freebsd_pkg;
|
|
if (@files){
|
|
my ($url);
|
|
foreach (@files){
|
|
push @dbg_files, $_ if $debugger_dir;
|
|
# these will be result sets separated by an empty line
|
|
# first dump all lines that start with #
|
|
@content = main::reader($_,'strip');
|
|
# then do some clean up on the lines
|
|
@content = map { $_ =~ s/{|}|,|\*//g; $_; } @content if @content;
|
|
# get all rows not starting with a # and starting with a non space character
|
|
my $url = '';
|
|
foreach my $line (@content){
|
|
if ($line !~ /^\s*$/){
|
|
my @data2 = split /\s*:\s*/, $line;
|
|
@data2 = map { $_ =~ s/^\s+|\s+$//g; $_; } @data2;
|
|
if ($data2[0] eq 'url'){
|
|
$url = "$data2[1]:$data2[2]";
|
|
$url =~ s/"|,//g;
|
|
}
|
|
#print "url:$url\n" if $url;
|
|
if ($data2[0] eq 'enabled'){
|
|
if ($url && $data2[1] eq 'yes'){
|
|
push @data3, "$url"
|
|
}
|
|
$url = '';
|
|
}
|
|
}
|
|
}
|
|
if (! @data3){
|
|
$key = repo_builder('missing','bsd-package');
|
|
}
|
|
else {
|
|
@data3 = url_cleaner(@data3);
|
|
$key = repo_builder('active','bsd-package');
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $_},
|
|
[@data3],
|
|
);
|
|
@rows = (@rows,@data);
|
|
@data3 = ();
|
|
}
|
|
}
|
|
}
|
|
}
|
|
elsif (-f $openbsd || -f $openbsd2) {
|
|
if (-f $openbsd){
|
|
@data = repo_builder($openbsd,'openbsd','^installpath','\s*=\s*',1);
|
|
@rows = (@rows,@data);
|
|
}
|
|
if (-f $openbsd2){
|
|
@data = repo_builder($openbsd2,'openbsd','^(http|ftp)','',1);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
elsif (-f $netbsd){
|
|
# not an empty row, and not a row starting with #
|
|
@data = repo_builder($netbsd,'netbsd','^\s*[^#]+$');
|
|
@rows = (@rows,@data);
|
|
}
|
|
# BSDs do not default always to having repo files, so show correct error
|
|
# mesage in that case
|
|
if (!@rows){
|
|
if ($bsd_type eq 'freebsd'){
|
|
$key = repo_builder('missing','freebsd-nf');
|
|
}
|
|
elsif ($bsd_type eq 'openbsd'){
|
|
$key = repo_builder('missing','openbsd-nf');
|
|
}
|
|
elsif ($bsd_type eq 'netbsd'){
|
|
$key = repo_builder('missing','netbsd-nf');
|
|
}
|
|
else {
|
|
$key = repo_builder('missing','bsd-nf');
|
|
}
|
|
@data = (
|
|
{main::key($num++,'Message') => $key},
|
|
[()],
|
|
);
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $start if $b_log;
|
|
return @rows;
|
|
}
|
|
sub repo_builder {
|
|
eval $start if $b_log;
|
|
my ($file,$type,$search,$split,$count) = @_;
|
|
my (@content,@data,$missing,$key);
|
|
my %unfound = (
|
|
'apk' => 'No active APK repos in',
|
|
'apt' => 'No active apt repos in',
|
|
'bsd-package' => 'No enabled BSD pkg servers in',
|
|
'bsd-nf' => 'No BSD pkg server files found',
|
|
'eopkg' => 'No active eopkg repos found',
|
|
'pacman' => 'No active pacman repos in',
|
|
'pacman-g2' => 'No active pacman-g2 repos in',
|
|
'pisi' => 'No active pisi repos found',
|
|
'portage' => 'No enabled portage sources in',
|
|
'portsnap' => 'No ports servers in',
|
|
'freebsd' => 'No FreeBSD update servers in',
|
|
'freebsd-nf' => 'No FreeBSD update server files found',
|
|
'freebsd-pkg' => 'No FreeBSD default pkg server in',
|
|
'openbsd' => 'No OpenBSD pkg mirrors in',
|
|
'openbsd-nf' => 'No OpenBSD pkg mirror files found',
|
|
'netbsd' => 'No NetBSD pkg servers in',
|
|
'netbsd-nf' => 'No NetBSD pkg server files found',
|
|
'no-files' => 'No repo files found in',
|
|
'slackpkg' => 'No active slackpkg repos in',
|
|
'slackpkg+' => 'No active slackpkg+ repos in',
|
|
'yum' => 'No active yum repos in',
|
|
'zypp' => 'No active zypp repos in',
|
|
);
|
|
$missing = $unfound{$type};
|
|
return $missing if $file eq 'missing';
|
|
my %keys = (
|
|
'apk' => 'APK repo',
|
|
'apt' => 'Active apt repos in',
|
|
'bsd-package' => 'BSD enabled pkg servers in',
|
|
'eopkg' => 'Active eopkg repo',
|
|
'freebsd' => 'FreeBSD update server',
|
|
'freebsd-pkg' => 'FreeBSD default pkg server',
|
|
'pacman' => 'Active pacman repo servers in',
|
|
'pacman-g2' => 'Active pacman-g2 repo servers in',
|
|
'pisi' => 'Active pisi repo',
|
|
'portage' => 'Enabled portage sources in',
|
|
'portsnap' => 'BSD ports server',
|
|
'openbsd' => 'OpenBSD pkg mirror',
|
|
'netbsd' => 'NetBSD pkg servers',
|
|
'slackpkg' => 'slackpkg repos in',
|
|
'slackpkg+' => 'slackpkg+ repos in',
|
|
'yum' => 'Active yum repos in',
|
|
'zypp' => 'Active zypp repos in',
|
|
);
|
|
$key = $keys{$type};
|
|
return $key if $file eq 'active';
|
|
push @dbg_files, $file if $debugger_dir;
|
|
@content = main::reader($file);
|
|
@content = grep {/$search/i && !/^\s*$/} @content if @content;
|
|
@content = data_cleaner(@content);
|
|
if ($split){
|
|
@content = map {
|
|
my @inner = split (/$split/, $_);
|
|
$inner[$count];
|
|
} @content;
|
|
}
|
|
if (!@content){
|
|
$key = $missing;
|
|
}
|
|
else {
|
|
@content = url_cleaner(@content);
|
|
}
|
|
@data = (
|
|
{main::key($num++,$key) => $file},
|
|
[@content],
|
|
);
|
|
eval $end if $b_log;
|
|
return @data;
|
|
}
|
|
sub data_cleaner {
|
|
my (@content) = @_;
|
|
# basics: trim white space, get rid of double spaces
|
|
@content = map { $_ =~ s/^\s+|\s+$//g; $_ =~ s/\s\s+/ /g; $_} @content;
|
|
return @content;
|
|
}
|
|
# clean if irc
|
|
sub url_cleaner {
|
|
my (@content) = @_;
|
|
@content = map { $_ =~ s/:\//: \//; $_} @content if $b_irc;
|
|
return @content;
|
|
}
|
|
sub file_path {
|
|
my ($filename,$dir) = @_;
|
|
my ($working);
|
|
$working = $filename;
|
|
$working =~ s/^\///;
|
|
$working =~ s/\//-/g;
|
|
$working = "$dir/file-repo-$working.txt";
|
|
return $working;
|
|
}
|
|
}
|
|
|
|
## SensorData
|
|
{
|
|
package SensorData;
|
|
my (@sensors_data);
|
|
my ($b_ipmi) = (0);
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my ($key1,$program,$val1,@data,@rows,%sensors);
|
|
my $num = 0;
|
|
my $source = 'sensors';
|
|
# we're allowing 1 or 2 ipmi tools, first the gnu one, then the
|
|
# almost certain to be present in BSDs
|
|
if ( $b_ipmi ||
|
|
( main::globber('/dev/ipmi*') &&
|
|
( ( $program = main::check_program('ipmi-sensors') ) ||
|
|
( $program = main::check_program('ipmitool') ) ) ) ){
|
|
if ($b_ipmi || $b_root){
|
|
%sensors = ipmi_data($program);
|
|
@data = create_output('ipmi',%sensors);
|
|
if (!@data) {
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('sensors-data-ipmi');
|
|
#$val1 = main::row_defaults('dev');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
@rows = (@rows,@data);
|
|
$source = 'lm-sensors'; # trips per sensor type output
|
|
}
|
|
else {
|
|
$key1 = 'Permissions';
|
|
$val1 = main::row_defaults('sensors-ipmi-root');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
my $ref = $alerts{'sensors'};
|
|
if ( $$ref{'action'} ne 'use'){
|
|
#print "here 1\n";
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
$key1 = ucfirst($key1);
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
%sensors = sensors_data();
|
|
@data = create_output($source,%sensors);
|
|
#print "here 2\n";
|
|
if (!@data) {
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('sensors-data-linux');
|
|
@data = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
@rows = (@rows,@data);
|
|
}
|
|
undef @sensors_data;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my ($source,%sensors) = @_;
|
|
# note: might revisit this, since gpu sensors data might be present
|
|
return if ! %sensors;
|
|
my (@gpu,@data,@rows,@fan_default,@fan_main);
|
|
my ($data_source) = ('');
|
|
my $fan_number = 0;
|
|
my $num = 0;
|
|
my $j = 0;
|
|
@gpu = gpu_data() if ( $source eq 'sensors' || $source eq 'lm-sensors' );
|
|
my $temp_unit = (defined $sensors{'temp-unit'}) ? " $sensors{'temp-unit'}": '';
|
|
my $cpu_temp = (defined $sensors{'cpu-temp'}) ? $sensors{'cpu-temp'} . $temp_unit: 'N/A';
|
|
my $mobo_temp = (defined $sensors{'mobo-temp'}) ? $sensors{'mobo-temp'} . $temp_unit: 'N/A';
|
|
my $cpu1_key = ($sensors{'cpu2-temp'}) ? 'cpu-1': 'cpu' ;
|
|
$data_source = $source if ($source eq 'ipmi' || $source eq 'lm-sensors');
|
|
@data = ({
|
|
main::key($num++,'System Temperatures') => $data_source,
|
|
main::key($num++,$cpu1_key) => $cpu_temp,
|
|
});
|
|
@rows = (@rows,@data);
|
|
if ($sensors{'cpu2-temp'}){
|
|
$rows[$j]{main::key($num++,'cpu-2')} = $sensors{'cpu2-temp'} . $temp_unit;
|
|
}
|
|
if ($sensors{'cpu3-temp'}){
|
|
$rows[$j]{main::key($num++,'cpu-3')} = $sensors{'cpu3-temp'} . $temp_unit;
|
|
}
|
|
if ($sensors{'cpu4-temp'}){
|
|
$rows[$j]{main::key($num++,'cpu-4')} = $sensors{'cpu4-temp'} . $temp_unit;
|
|
}
|
|
$rows[$j]{main::key($num++,'mobo')} = $mobo_temp;
|
|
if (defined $sensors{'sodimm-temp'}){
|
|
my $sodimm_temp = $sensors{'sodimm-temp'} . $temp_unit;
|
|
$rows[$j]{main::key($num++,'sodimm')} = $sodimm_temp;
|
|
}
|
|
if (defined $sensors{'psu-temp'}){
|
|
my $psu_temp = $sensors{'psu-temp'} . $temp_unit;
|
|
$rows[$j]{main::key($num++,'psu')} = $psu_temp;
|
|
}
|
|
if (scalar @gpu == 1){
|
|
my $gpu_temp = $gpu[0]{'temp'};
|
|
my $gpu_type = $gpu[0]{'type'};
|
|
my $gpu_unit = (defined $gpu[0]{'temp-unit'} && $gpu_temp ) ? " $gpu[0]{'temp-unit'}" : ' C';
|
|
$rows[$j]{main::key($num++,'gpu')} = $gpu_type;
|
|
$rows[$j]{main::key($num++,'temp')} = $gpu_temp . $gpu_unit;
|
|
}
|
|
$j = scalar @rows;
|
|
my $ref_main = $sensors{'fan-main'};
|
|
my $ref_default = $sensors{'fan-default'};
|
|
@fan_main = @$ref_main if @$ref_main;
|
|
@fan_default = @$ref_default if @$ref_default;
|
|
my $fan_def = ($data_source) ? $data_source : '';
|
|
if (!@fan_main && !@fan_default){
|
|
$fan_def = ($fan_def) ? "$data_source N/A" : 'N/A';
|
|
}
|
|
$rows[$j]{main::key($num++,'Fan Speeds (RPM)')} = $fan_def;
|
|
my $b_cpu = 0;
|
|
for (my $i = 0; $i < scalar @fan_main; $i++){
|
|
next if $i == 0;# starts at 1, not 0
|
|
if (defined $fan_main[$i]){
|
|
if ($i == 1 || ($i == 2 && !$b_cpu )){
|
|
$rows[$j]{main::key($num++,'cpu')} = $fan_main[$i];
|
|
$b_cpu = 1;
|
|
}
|
|
elsif ($i == 2 && $b_cpu){
|
|
$rows[$j]{main::key($num++,'mobo')} = $fan_main[$i];
|
|
}
|
|
elsif ($i == 3){
|
|
$rows[$j]{main::key($num++,'psu')} = $fan_main[$i];
|
|
}
|
|
elsif ($i == 4){
|
|
$rows[$j]{main::key($num++,'sodimm')} = $fan_main[$i];
|
|
}
|
|
elsif ($i > 4){
|
|
$fan_number = $i - 4;
|
|
$rows[$j]{main::key($num++,"case-$fan_number")} = $fan_main[$i];
|
|
}
|
|
}
|
|
}
|
|
for (my $i = 0; $i < scalar @fan_default; $i++){
|
|
next if $i == 0;# starts at 1, not 0
|
|
if (defined $fan_default[$i]){
|
|
$rows[$j]{main::key($num++,"fan-$i")} = $fan_default[$i];
|
|
}
|
|
}
|
|
# note: so far, only nvidia-settings returns speed, and that's in percent
|
|
if (scalar @gpu == 1 && defined $gpu[0]{'fan-speed'}){
|
|
my $gpu_fan = $gpu[0]{'fan-speed'} . $gpu[0]{'speed-unit'};
|
|
my $gpu_type = $gpu[0]{'type'};
|
|
$rows[$j]{main::key($num++,'gpu')} = $gpu_type;
|
|
$rows[$j]{main::key($num++,'fan')} = $gpu_fan;
|
|
}
|
|
if (scalar @gpu > 1){
|
|
$j = scalar @rows;
|
|
$rows[$j]{main::key($num++,'GPU')} = '';
|
|
my $gpu_unit = (defined $gpu[0]{'temp-unit'} ) ? " $gpu[0]{'temp-unit'}" : ' C';
|
|
foreach my $ref (@gpu){
|
|
my %info = %$ref;
|
|
# speed unit is either '' or %
|
|
my $gpu_fan = (defined $info{'fan-speed'}) ? $info{'fan-speed'} . $info{'speed-unit'}: undef ;
|
|
my $gpu_type = $info{'type'};
|
|
my $gpu_temp = (defined $info{'temp'} ) ? $info{'temp'} . $gpu_unit: 'N/A';
|
|
$rows[$j]{main::key($num++,'device')} = $gpu_type;
|
|
if (defined $info{'screen'} ){
|
|
$rows[$j]{main::key($num++,'screen')} = $info{'screen'};
|
|
}
|
|
$rows[$j]{main::key($num++,'temp')} = $gpu_temp;
|
|
if (defined $gpu_fan){
|
|
$rows[$j]{main::key($num++,'fan')} = $gpu_fan;
|
|
}
|
|
}
|
|
}
|
|
if ($extra > 0 && ($source eq 'ipmi' ||
|
|
($sensors{'volts-12'} || $sensors{'volts-5'} || $sensors{'volts-3.3'} || $sensors{'volts-vbat'}))){
|
|
$j = scalar @rows;
|
|
$sensors{'volts-12'} ||= 'N/A';
|
|
$sensors{'volts-5'} ||= 'N/A';
|
|
$sensors{'volts-3.3'} ||= 'N/A';
|
|
$sensors{'volts-vbat'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'Voltages')} = $data_source;
|
|
$rows[$j]{main::key($num++,'12v')} = $sensors{'volts-12'};
|
|
$rows[$j]{main::key($num++,'5v')} = $sensors{'volts-5'};
|
|
$rows[$j]{main::key($num++,'3.3v')} = $sensors{'volts-3.3'};
|
|
$rows[$j]{main::key($num++,'vbat')} = $sensors{'volts-vbat'};
|
|
if ($extra > 1 && $source eq 'ipmi' ){
|
|
$sensors{'volts-dimm-p1'} ||= 'N/A';
|
|
$sensors{'volts-dimm-p2'} ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'dimm-p1')} = $sensors{'volts-dimm-p1'} if $sensors{'volts-dimm-p1'};
|
|
$rows[$j]{main::key($num++,'dimm-p2')} = $sensors{'volts-dimm-p2'} if $sensors{'volts-dimm-p2'};
|
|
$rows[$j]{main::key($num++,'soc-p1')} = $sensors{'volts-soc-p1'} if $sensors{'volts-soc-p1'};
|
|
$rows[$j]{main::key($num++,'soc-p2')} = $sensors{'volts-soc-p2'} if $sensors{'volts-soc-p2'};
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub ipmi_data {
|
|
eval $start if $b_log;
|
|
my ($program) = @_;
|
|
my ($cmd,$file,@data,$fan_working,%sensors,@row,$sys_fan_nu,$temp_working,$working_unit);
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/ipmitool/ipmitool-sensors-archerseven-1.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/ipmitool/ipmitool-sensors-crazy-epyc-1.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/ipmitool/ipmi-sensors-crazy-epyc-1.txt";$program='ipmi-sensors';
|
|
#@data = main::reader($file);
|
|
$program ||= 'ipmi-xx'; # only for debugging, will always exist if reachers here
|
|
my ($b_ipmitool,$i_key,$i_value,$i_unit);
|
|
if ($program =~ /ipmi-sensors$/){
|
|
$cmd = $program;
|
|
($b_ipmitool,$i_key,$i_value,$i_unit) = (0,1,3,4);
|
|
}
|
|
else {
|
|
$cmd = "$program sensors";
|
|
($b_ipmitool,$i_key,$i_value,$i_unit) = (1,0,1,2);
|
|
}
|
|
@data = main::grabber("$cmd 2>/dev/null");
|
|
return if ! @data;
|
|
foreach (@data){
|
|
next if /^\s*$/;
|
|
#print "$_\n";
|
|
@row = split /\s*\|\s*/, $_;
|
|
#print "$row[$i_key] $row[$i_value]\n";
|
|
if ($row[$i_key] =~ /^System Temp/i){
|
|
$sensors{'mobo-temp'} = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# Platform Control Hub (PCH), it is the X370 chip on the Crosshair VI Hero.
|
|
# VRM: voltage regulator module
|
|
elsif ($row[$i_key] =~ /^CPU[1]?\sTemp/i) {
|
|
$sensors{'cpu-temp'} = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($row[$i_key] =~ /^CPU([2-4])\sTemp/i) {
|
|
$temp_working = $1;
|
|
$sensors{"cpu${temp_working}-temp"} = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# for temp1/2 only use temp1/2 if they are null or greater than the last ones
|
|
elsif ($row[$i_key] =~ /^Temp 1$/i) {
|
|
$temp_working = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
if ( !$sensors{'temp1'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp1'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($row[$i_key] =~ /^Temp 2$/i) {
|
|
$temp_working = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
if ( !$sensors{'temp2'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp2'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# temp3 is only used as an absolute override for systems with all 3 present
|
|
elsif ($row[$i_key] =~ /^Temp 3$/i) {
|
|
$temp_working = int($row[$i_value]);
|
|
$working_unit = $row[$i_unit];
|
|
$working_unit =~ s/degrees\s// if $b_ipmitool;
|
|
if ( !$sensors{'temp3'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp3'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# note: can be cpu fan:, cpu fan speed:, etc.
|
|
elsif ($row[$i_key] =~ /^(CPU|Processor)\sFan/i) {
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
$sensors{'fan-main'}[1] = int($row[$i_value]);
|
|
}
|
|
# note that the counters are dynamically set for fan numbers here
|
|
# otherwise you could overwrite eg aux fan2 with case fan2 in theory
|
|
# note: cpu/mobo/ps are 1/2/3
|
|
elsif ($row[$i_key] =~ /^FAN([0-9A-F]+)/i) {
|
|
$sys_fan_nu = hex($1);
|
|
next if $row[$i_value] !~ /^[0-9\.]+$/;
|
|
$fan_working = int($row[$i_value]);
|
|
$sensors{'fan-default'} = () if !$sensors{'fan-default'};
|
|
if ( $sys_fan_nu =~ /^([0-9]+)$/ ) {
|
|
# add to array if array index does not exist OR if number is > existing number
|
|
if ( defined $sensors{'fan-default'}[$sys_fan_nu] ) {
|
|
if ( $fan_working >= $sensors{'fan-default'}[$sys_fan_nu] ) {
|
|
$sensors{'fan-default'}[$sys_fan_nu] = $fan_working;
|
|
}
|
|
}
|
|
else {
|
|
$sensors{'fan-default'}[$sys_fan_nu] = $fan_working;
|
|
}
|
|
}
|
|
}
|
|
if ($extra > 0){
|
|
if ($row[$i_key] =~ /^12V$/i) {
|
|
$sensors{'volts-12'} = $row[$i_value];
|
|
}
|
|
elsif ($row[$i_key] =~ /^(P5V|5VCC)$/i) {
|
|
$sensors{'volts-5'} = $row[$i_value];
|
|
}
|
|
elsif ($row[$i_key] =~ /^(P3V3|3.3VCC)$/i) {
|
|
$sensors{'volts-3.3'} = $row[$i_value];
|
|
}
|
|
elsif ($row[$i_key] =~ /^VBAT$/i) {
|
|
$sensors{'volts-vbat'} = $row[$i_value];
|
|
}
|
|
# NOTE: VDimmP1ABC VDimmP1DEF
|
|
elsif (!$sensors{'volts-dimm-p1'} && $row[$i_key] =~ /^(P1_VMEM|VDimmP1)/i) {
|
|
$sensors{'volts-dimm-p1'} = $row[$i_value];
|
|
}
|
|
elsif (! $sensors{'volts-dimm-p2'} && $row[$i_key] =~ /^(P2_VMEM|VDimmP2)/i) {
|
|
$sensors{'volts-dimm-p2'} = $row[$i_value];
|
|
}
|
|
elsif (!$sensors{'volts-soc-p1'} && $row[$i_key] =~ /^(P1_SOC_RUN$)/i) {
|
|
$sensors{'volts-soc-p1'} = $row[$i_value];
|
|
}
|
|
elsif (! $sensors{'volts-soc-p2'} && $row[$i_key] =~ /^(P2_SOC_RUN$)/i) {
|
|
$sensors{'volts-soc-p2'} = $row[$i_value];
|
|
}
|
|
}
|
|
}
|
|
|
|
# print Data::Dumper::Dumper \%sensors;
|
|
%sensors = data_processor(%sensors) if %sensors;
|
|
main::log_data('dump','ipmi: %sensors',\%sensors) if $b_log;
|
|
eval $end if $b_log;
|
|
#print Data::Dumper::Dumper \%sensors;
|
|
return %sensors;
|
|
}
|
|
sub sensors_data {
|
|
eval $start if $b_log;
|
|
my (%sensors);
|
|
my ($b_valid,$sys_fan_nu) = (0,0);
|
|
my ($adapter,$fan_working,$temp_working,$working_unit) = ('','','','');
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sensors/amdgpu-w-fan-speed-stretch-k10.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sensors/peci-tin-geggo.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sensors/sensors-w-other-biker.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sensors/sensors-asus-chassis-1.txt";
|
|
#@sensors_data = main::reader($file);
|
|
@sensors_data = main::grabber(main::check_program('sensors') . " 2>/dev/null");
|
|
#print @sensors_data;
|
|
@sensors_data = map {$_ =~ s/\s*:\s*\+?/:/;$_} @sensors_data;
|
|
foreach (@sensors_data){
|
|
# we get this from gpu_data()
|
|
if (/^(amdgpu|intel|nouveau|radeon)-pci/){
|
|
$b_valid = 0;
|
|
$adapter = '';
|
|
next;
|
|
}
|
|
if (/^(?:(?!amdgpu|intel|nouveau|radeon).)*-(isa|pci|virtual)-/){
|
|
$b_valid = 1;
|
|
$adapter = $1;
|
|
next;
|
|
}
|
|
next if !$b_valid;
|
|
my @working = split /:/, $_;
|
|
next if !$working[0] || /^Adapter/;
|
|
#print "$working[0]:$working[1]\n";
|
|
# There are some guesses here, but with more sensors samples it will get closer.
|
|
# note: using arrays starting at 1 for all fan arrays to make it easier overall
|
|
# we have to be sure we are working with the actual real string before assigning
|
|
# data to real variables and arrays. Extracting C/F degree unit as well to use
|
|
# when constructing temp items for array.
|
|
# note that because of charset issues, no "°" degree sign used, but it is required
|
|
# in testing regex to avoid error. It might be because I got that data from a forum post,
|
|
# note directly via debugger.
|
|
if ($_ =~ /^(AMBIENT|M\/B|MB|SIO|SYS).*:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$sensors{'mobo-temp'} = $2;
|
|
$working_unit = $3;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# issue 58 msi/asus show wrong for CPUTIN so overwrite it if PECI 0 is present
|
|
# http://www.spinics.net/lists/lm-sensors/msg37308.html
|
|
# NOTE: had: ^CPU.*\+([0-9]+): but that misses: CPUTIN and anything not with + in starter
|
|
# However, "CPUTIN is not a reliable measurement because it measures difference to Tjmax,
|
|
# which is the maximum CPU temperature reported as critical temperature by coretemp"
|
|
# NOTE: I've seen an inexplicable case where: CPU:52.0°C fails to match with [\s°] but
|
|
# does match with: [\s°]*. I can't account for this, but that's why the * is there
|
|
elsif (!$sensors{'cpu-temp'} && $_ =~ /^CPU.*:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$sensors{'cpu-temp'} = $1;
|
|
$working_unit = $2;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($_ =~ /^PECI\sAgent\s0.*:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$sensors{'cpu-peci-temp'} = $1;
|
|
$working_unit = $2;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($_ =~ /^(P\/S|Power).*:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$sensors{'psu-temp'} = $2;
|
|
$working_unit = $3;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($_ =~ /^SODIMM.*:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$sensors{'sodimm-temp'} = $1;
|
|
$working_unit = $2;
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
|
|
}
|
|
# for temp1/2 only use temp1/2 if they are null or greater than the last ones
|
|
elsif ($_ =~ /^temp1:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$temp_working = $1;
|
|
$working_unit = $2;
|
|
if ( !$sensors{'temp1'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp1'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
elsif ($_ =~ /^temp2:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$temp_working = $1;
|
|
$working_unit = $2;
|
|
if ( !$sensors{'temp2'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp2'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# temp3 is only used as an absolute override for systems with all 3 present
|
|
elsif ($_ =~ /^temp3:([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$temp_working = $1;
|
|
$working_unit = $2;
|
|
if ( !$sensors{'temp3'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'temp3'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# final fallback if all else fails, funtoo user showed sensors putting
|
|
# temp on wrapped second line, not handled
|
|
elsif ($_ =~ /^(core0|core 0|Physical id 0)(.*):([0-9\.]+)[\s°]*(C|F)/i) {
|
|
$temp_working = $3;
|
|
$working_unit = $4;
|
|
if ( !$sensors{'core-0-temp'} || ( defined $temp_working && $temp_working > 0 ) ) {
|
|
$sensors{'core-0-temp'} = $temp_working;
|
|
}
|
|
$sensors{'temp-unit'} = set_temp_unit($sensors{'temp-unit'},$working_unit) if $working_unit;
|
|
}
|
|
# note: can be cpu fan:, cpu fan speed:, etc.
|
|
elsif (!$sensors{'fan-main'}[1] && $_ =~ /^(CPU|Processor).*:([0-9]+)[\s]RPM/i) {
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
$sensors{'fan-main'}[1] = $2;
|
|
}
|
|
elsif (!$sensors{'fan-main'}[2] && $_ =~ /^(M\/B|MB|SYS).*:([0-9]+)[\s]RPM/i) {
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
$sensors{'fan-main'}[2] = $2;
|
|
}
|
|
elsif (!$sensors{'fan-main'}[3] && $_ =~ /(Power|P\/S|POWER).*:([0-9]+)[\s]RPM/i) {
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
$sensors{'fan-main'}[3] = $2;
|
|
}
|
|
elsif (!$sensors{'fan-main'}[4] && $_ =~ /(SODIMM).*:([0-9]+)[\s]RPM/i) {
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
$sensors{'fan-main'}[4] = $2;
|
|
}
|
|
# note that the counters are dynamically set for fan numbers here
|
|
# otherwise you could overwrite eg aux fan2 with case fan2 in theory
|
|
# note: cpu/mobo/ps/sodimm are 1/2/3/4
|
|
elsif ($_ =~ /^(AUX|CASE|CHASSIS).*:([0-9]+)[\s]RPM/i) {
|
|
$temp_working = $2;
|
|
$sensors{'fan-main'} = () if !$sensors{'fan-main'};
|
|
for ( my $i = 5; $i < 30; $i++ ){
|
|
next if defined $sensors{'fan-main'}[$i];
|
|
if ( !defined $sensors{'fan-main'}[$i] ){
|
|
$sensors{'fan-main'}[$i] = $temp_working;
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
# in rare cases syntax is like: fan1: xxx RPM
|
|
elsif ($_ =~ /^FAN(1)?:([0-9]+)[\s]RPM/i) {
|
|
$sensors{'fan-default'} = () if !$sensors{'fan-default'};
|
|
$sensors{'fan-default'}[1] = $2;
|
|
}
|
|
elsif ($_ =~ /^FAN([2-9]|1[0-9]).*:([0-9]+)[\s]RPM/i) {
|
|
$fan_working = $2;
|
|
$sys_fan_nu = $1;
|
|
$sensors{'fan-default'} = () if !$sensors{'fan-default'};
|
|
if ( $sys_fan_nu =~ /^([0-9]+)$/ ) {
|
|
# add to array if array index does not exist OR if number is > existing number
|
|
if ( defined $sensors{'fan-default'}[$sys_fan_nu] ) {
|
|
if ( $fan_working >= $sensors{'fan-default'}[$sys_fan_nu] ) {
|
|
$sensors{'fan-default'}[$sys_fan_nu] = $fan_working;
|
|
}
|
|
}
|
|
else {
|
|
$sensors{'fan-default'}[$sys_fan_nu] = $fan_working;
|
|
}
|
|
}
|
|
}
|
|
if ($extra > 0){
|
|
if ($_ =~ /^[+]?(12 Volt|12V).*:([0-9\.]+)\sV/i) {
|
|
$sensors{'volts-12'} = $2;
|
|
}
|
|
# note: 5VSB is a field name
|
|
elsif ($_ =~ /^[+]?(5 Volt|5V):([0-9\.]+)\sV/i) {
|
|
$sensors{'volts-5'} = $2;
|
|
}
|
|
elsif ($_ =~ /^[+]?(3\.3 Volt|3\.3V).*:([0-9\.]+)\sV/i) {
|
|
$sensors{'volts-3.3'} = $2;
|
|
}
|
|
elsif ($_ =~ /^(Vbat).*:([0-9\.]+)\sV/i) {
|
|
$sensors{'volts-vbat'} = $2;
|
|
}
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper \%sensors;
|
|
%sensors = data_processor(%sensors) if %sensors;
|
|
main::log_data('dump','lm-sensors: %sensors',\%sensors) if $b_log;
|
|
# print Data::Dumper::Dumper \%sensors;
|
|
eval $end if $b_log;
|
|
return %sensors;
|
|
}
|
|
|
|
# oddly, openbsd sysctl actually has hw.sensors data!
|
|
sub sysctl_data {
|
|
eval $start if $b_log;
|
|
my (@data,%sensors);
|
|
foreach (@sysctl_sensors){
|
|
if (/^hw.sensors\.([0-9a-z]+)\.(temp|fan|volt)([0-9])/){
|
|
my $sensor = $1;
|
|
my $type = $2;
|
|
my $number = $3;
|
|
my @working = split /:/, $_;
|
|
}
|
|
last if /^(hw.cpuspeed|hw.vendor|hw.physmem)/;
|
|
}
|
|
|
|
%sensors = data_processor(%sensors) if %sensors;
|
|
main::log_data('dump','%sensors',\%sensors) if $b_log;
|
|
# print Data::Dumper::Dumper \%sensors;
|
|
eval $end if $b_log;
|
|
return %sensors;
|
|
}
|
|
sub set_temp_unit {
|
|
my ($sensors,$working) = @_;
|
|
my $return_unit = '';
|
|
|
|
if ( !$sensors && $working ){
|
|
$return_unit = $working;
|
|
}
|
|
elsif ($sensors){
|
|
$return_unit = $sensors;
|
|
}
|
|
return $return_unit;
|
|
}
|
|
|
|
sub data_processor {
|
|
eval $start if $b_log;
|
|
my (%sensors) = @_;
|
|
my ($cpu_temp,$cpu2_temp,$cpu3_temp,$cpu4_temp,$index_count_fan_default,
|
|
$index_count_fan_main,$mobo_temp,$psu_temp) = (0,0,0,0,0,0,0,0);
|
|
my ($fan_type,$i,$j) = (0,0,0);
|
|
my $temp_diff = 20; # for C, handled for F after that is determined
|
|
my (@fan_main,@fan_default);
|
|
# first we need to handle the case where we have to determine which temp/fan to use for cpu and mobo:
|
|
# note, for rare cases of weird cool cpus, user can override in their prefs and force the assignment
|
|
# this is wrong for systems with > 2 tempX readings, but the logic is too complex with 3 variables
|
|
# so have to accept that it will be wrong in some cases, particularly for motherboard temp readings.
|
|
if ( $sensors{'temp1'} && $sensors{'temp2'} ){
|
|
if ( $sensors_cpu_nu ) {
|
|
$fan_type = $sensors_cpu_nu;
|
|
}
|
|
else {
|
|
# first some fringe cases with cooler cpu than mobo: assume which is cpu temp based on fan speed
|
|
# but only if other fan speed is 0.
|
|
if ( $sensors{'temp1'} >= $sensors{'temp2'} &&
|
|
defined $fan_default[1] && defined $fan_default[2] && $fan_default[1] == 0 && $fan_default[2] > 0 ) {
|
|
$fan_type = 2;
|
|
}
|
|
elsif ( $sensors{'temp2'} >= $sensors{'temp1'} &&
|
|
defined $fan_default[1] && defined $fan_default[2] && $fan_default[2] == 0 && $fan_default[1] > 0 ) {
|
|
$fan_type = 1;
|
|
}
|
|
# then handle the standard case if these fringe cases are false
|
|
elsif ( $sensors{'temp1'} >= $sensors{'temp2'} ) {
|
|
$fan_type = 1;
|
|
}
|
|
else {
|
|
$fan_type = 2;
|
|
}
|
|
}
|
|
}
|
|
# need a case for no temps at all reported, like with old intels
|
|
elsif ( !$sensors{'temp2'} && !$sensors{'cpu-temp'} ){
|
|
if ( !$sensors{'temp1'} && !$sensors{'mobo-temp'} ){
|
|
$fan_type = 1;
|
|
}
|
|
elsif ( $sensors{'temp1'} && !$sensors{'mobo-temp'} ){
|
|
$fan_type = 1;
|
|
}
|
|
elsif ( $sensors{'temp1'} && $sensors{'mobo-temp'} ){
|
|
$fan_type = 1;
|
|
}
|
|
}
|
|
# convert the diff number for F, it needs to be bigger that is
|
|
if ( $sensors{'temp-unit'} && $sensors{'temp-unit'} eq "F" ) {
|
|
$temp_diff = $temp_diff * 1.8
|
|
}
|
|
if ( $sensors{'cpu-temp'} ) {
|
|
# specific hack to handle broken CPUTIN temps with PECI
|
|
if ( $sensors{'cpu-peci-temp'} && ( $sensors{'cpu-temp'} - $sensors{'cpu-peci-temp'} ) > $temp_diff ){
|
|
$cpu_temp = $sensors{'cpu-peci-temp'};
|
|
}
|
|
# then get the real cpu temp, best guess is hottest is real, though only within narrowed diff range
|
|
else {
|
|
$cpu_temp = $sensors{'cpu-temp'};
|
|
}
|
|
}
|
|
else {
|
|
if ($fan_type ){
|
|
# there are some weird scenarios
|
|
if ( $fan_type == 1 ){
|
|
if ( $sensors{'temp1'} && $sensors{'temp2'} && $sensors{'temp2'} > $sensors{'temp1'} ) {
|
|
$cpu_temp = $sensors{'temp2'};
|
|
}
|
|
else {
|
|
$cpu_temp = $sensors{'temp1'};
|
|
}
|
|
}
|
|
else {
|
|
if ( $sensors{'temp1'} && $sensors{'temp2'} && $sensors{'temp1'} > $sensors{'temp2'} ) {
|
|
$cpu_temp = $sensors{'temp1'};
|
|
}
|
|
else {
|
|
$cpu_temp = $sensors{'temp2'};
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$cpu_temp = $sensors{'temp1'}; # can be null, that is ok
|
|
}
|
|
if ( $cpu_temp ) {
|
|
# using $sensors{'temp3'} is just not reliable enough, more errors caused than fixed imo
|
|
#if ( $sensors{'temp3'} && $sensors{'temp3'} > $cpu_temp ) {
|
|
# $cpu_temp = $sensors{'temp3'};
|
|
#}
|
|
# there are some absurdly wrong $sensors{'temp1'}: acpitz-virtual-0 $sensors{'temp1'}: +13.8°C
|
|
if ( $sensors{'core-0-temp'} && ($sensors{'core-0-temp'} - $cpu_temp) > $temp_diff ) {
|
|
$cpu_temp = $sensors{'core-0-temp'};
|
|
}
|
|
}
|
|
}
|
|
# if all else fails, use core0/peci temp if present and cpu is null
|
|
if ( !$cpu_temp ) {
|
|
if ( $sensors{'core-0-temp'} ) {
|
|
$cpu_temp = $sensors{'core-0-temp'};
|
|
}
|
|
# note that peci temp is known to be colder than the actual system
|
|
# sometimes so it is the last fallback we want to use even though in theory
|
|
# it is more accurate, but fact suggests theory wrong.
|
|
elsif ( $sensors{'cpu-peci-temp'} ) {
|
|
$cpu_temp = $sensors{'cpu-peci-temp'};
|
|
}
|
|
}
|
|
# then the real mobo temp
|
|
if ( $sensors{'mobo-temp'} ){
|
|
$mobo_temp = $sensors{'mobo-temp'};
|
|
}
|
|
elsif ( $fan_type ){
|
|
if ( $fan_type == 1 ) {
|
|
if ( $sensors{'temp1'} && $sensors{'temp2'} && $sensors{'temp2'} > $sensors{'temp1'} ) {
|
|
$mobo_temp = $sensors{'temp1'};
|
|
}
|
|
else {
|
|
$mobo_temp = $sensors{'temp2'};
|
|
}
|
|
}
|
|
else {
|
|
if ( $sensors{'temp1'} && $sensors{'temp2'} && $sensors{'temp1'} > $sensors{'temp2'} ) {
|
|
$mobo_temp = $sensors{'temp2'};
|
|
}
|
|
else {
|
|
$mobo_temp = $sensors{'temp1'};
|
|
}
|
|
}
|
|
## NOTE: not safe to assume $sensors{'temp3'} is the mobo temp, sad to say
|
|
#if ( $sensors{'temp1'} && $sensors{'temp2'} && $sensors{'temp3'} && $sensors{'temp3'} < $mobo_temp ) {
|
|
# $mobo_temp = $sensors{'temp3'};
|
|
#}
|
|
}
|
|
else {
|
|
$mobo_temp = $sensors{'temp2'};
|
|
}
|
|
@fan_main = @{$sensors{'fan-main'}} if $sensors{'fan-main'};
|
|
$index_count_fan_main = (@fan_main) ? scalar @fan_main : 0;
|
|
@fan_default = @{$sensors{'fan-default'}} if $sensors{'fan-default'};
|
|
$index_count_fan_default = (@fan_default) ? scalar @fan_default : 0;
|
|
# then set the cpu fan speed
|
|
if ( ! $fan_main[1] ) {
|
|
# note, you cannot test for $fan_default[1] or [2] != ""
|
|
# because that creates an array item in gawk just by the test itself
|
|
if ( $fan_type == 1 && defined $fan_default[1] ) {
|
|
$fan_main[1] = $fan_default[1];
|
|
$fan_default[1] = undef;
|
|
}
|
|
elsif ( $fan_type == 2 && defined $fan_default[2] ) {
|
|
$fan_main[1] = $fan_default[2];
|
|
$fan_default[2] = undef;
|
|
}
|
|
}
|
|
# clear out any duplicates. Primary fan real trumps fan working always if same speed
|
|
for ($i = 1; $i <= $index_count_fan_main; $i++) {
|
|
if ( defined $fan_main[$i] && $fan_main[$i] ) {
|
|
for ($j = 1; $j <= $index_count_fan_default; $j++) {
|
|
if ( defined $fan_default[$j] && $fan_main[$i] == $fan_default[$j] ) {
|
|
$fan_default[$j] = undef;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
# now see if you can find the fast little mobo fan, > 5000 rpm and put it as mobo
|
|
# note that gawk is returning true for some test cases when $fan_default[j] < 5000
|
|
# which has to be a gawk bug, unless there is something really weird with arrays
|
|
# note: 500 > $fan_default[j] < 1000 is the exact trigger, and if you manually
|
|
# assign that value below, the > 5000 test works again, and a print of the value
|
|
# shows the proper value, so the corruption might be internal in awk.
|
|
# Note: gensub is the culprit I think, assigning type string for range 501-1000 but
|
|
# type integer for all others, this triggers true for >
|
|
for ($j = 1; $j <= $index_count_fan_default; $j++) {
|
|
if ( defined $fan_default[$j] && $fan_default[$j] > 5000 && !$fan_main[2] ) {
|
|
$fan_main[2] = $fan_default[$j];
|
|
$fan_default[$j] = '';
|
|
# then add one if required for output
|
|
if ( $index_count_fan_main < 2 ) {
|
|
$index_count_fan_main = 2;
|
|
}
|
|
}
|
|
}
|
|
# if they are ALL null, print error message. psFan is not used in output currently
|
|
if ( !$cpu_temp && !$mobo_temp && !$fan_main[1] && !$fan_main[2] && !$fan_main[1] && !@fan_default ) {
|
|
%sensors = ();
|
|
}
|
|
else {
|
|
my ($psu_temp,$sodimm_temp,$v_12,$v_5,$v_3_3,$v_dimm_p1,$v_dimm_p2,$v_soc_p1,$v_soc_p2,$v_vbat);
|
|
$psu_temp = $sensors{'psu-temp'} if $sensors{'psu-temp'};
|
|
# sodimm fan is fan_main[4]
|
|
$sodimm_temp = $sensors{'sodimm-temp'} if $sensors{'sodimm-temp'};
|
|
$cpu2_temp = $sensors{'cpu2-temp'} if $sensors{'cpu2-temp'};
|
|
$cpu3_temp = $sensors{'cpu3-temp'} if $sensors{'cpu3-temp'};
|
|
$cpu4_temp = $sensors{'cpu4-temp'} if $sensors{'cpu4-temp'};
|
|
# so far only for ipmi, sensors data is junk for volts
|
|
if ($extra > 0 &&
|
|
($sensors{'volts-12'} || $sensors{'volts-5'} || $sensors{'volts-3.3'} || $sensors{'volts-vbat'}) ){
|
|
$v_12 = $sensors{'volts-12'} if $sensors{'volts-12'};
|
|
$v_5 = $sensors{'volts-5'} if $sensors{'volts-5'};
|
|
$v_3_3 = $sensors{'volts-3.3'} if $sensors{'volts-3.3'};
|
|
$v_vbat = $sensors{'volts-vbat'} if $sensors{'volts-vbat'};
|
|
$v_dimm_p1 = $sensors{'volts-dimm-p1'} if $sensors{'volts-dimm-p1'};
|
|
$v_dimm_p2 = $sensors{'volts-dimm-p2'} if $sensors{'volts-dimm-p2'};
|
|
$v_soc_p1 = $sensors{'volts-soc-p1'} if $sensors{'volts-soc-p1'};
|
|
$v_soc_p2 = $sensors{'volts-soc-p2'} if $sensors{'volts-soc-p2'};
|
|
}
|
|
%sensors = (
|
|
'cpu-temp' => $cpu_temp,
|
|
'cpu2-temp' => $cpu2_temp,
|
|
'cpu3-temp' => $cpu3_temp,
|
|
'cpu4-temp' => $cpu4_temp,
|
|
'mobo-temp' => $mobo_temp,
|
|
'psu-temp' => $psu_temp,
|
|
'temp-unit' => $sensors{'temp-unit'},
|
|
'fan-main' => \@fan_main,
|
|
'fan-default' => \@fan_default,
|
|
);
|
|
if ($psu_temp){
|
|
$sensors{'psu-temp'} = $psu_temp;
|
|
}
|
|
if ($sodimm_temp){
|
|
$sensors{'sodimm-temp'} = $sodimm_temp;
|
|
}
|
|
if ($extra > 0 && ($v_12 || $v_5 || $v_3_3 || $v_vbat) ){
|
|
$sensors{'volts-12'} = $v_12;
|
|
$sensors{'volts-5'} = $v_5;
|
|
$sensors{'volts-3.3'} = $v_3_3;
|
|
$sensors{'volts-vbat'} = $v_vbat;
|
|
$sensors{'volts-dimm-p1'} = $v_dimm_p1;
|
|
$sensors{'volts-dimm-p2'} = $v_dimm_p2;
|
|
$sensors{'volts-soc-p1'} = $v_soc_p1;
|
|
$sensors{'volts-soc-p2'} = $v_soc_p2;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return %sensors;
|
|
}
|
|
sub gpu_data {
|
|
eval $start if $b_log;
|
|
return @gpudata if $b_gpudata;
|
|
my ($cmd,@data,@data2,$path,@screens,$temp);
|
|
my ($j) = (0);
|
|
if ($path = main::check_program('nvidia-settings')){
|
|
# first get the number of screens. This only work if you are in X
|
|
if ($b_display) {
|
|
@data = main::grabber("$path -q screens 2>/dev/null");
|
|
foreach (@data){
|
|
if ( /(:[0-9]\.[0-9])/ ) {
|
|
push @screens, $1;
|
|
}
|
|
}
|
|
}
|
|
# do a guess, this will work for most users, it's better than nothing for out of X
|
|
else {
|
|
$screens[0] = ':0.0';
|
|
}
|
|
# now we'll get the gpu temp for each screen discovered. The print out function
|
|
# will handle removing screen data for single gpu systems. -t shows only data we want
|
|
# GPUCurrentClockFreqs: 520,600
|
|
# GPUCurrentFanSpeed: 50 0-100, not rpm, percent I think
|
|
# VideoRam: 1048576
|
|
# CUDACores: 16
|
|
# PCIECurrentLinkWidth: 16
|
|
# PCIECurrentLinkSpeed: 5000
|
|
# RefreshRate: 60.02 Hz [oer screen]
|
|
# ViewPortOut=1280x1024+0+0}, DPY-1: nvidia-auto-select @1280x1024 +1280+0 {ViewPortIn=1280x1024,
|
|
# ViewPortOut=1280x1024+0+0}
|
|
# ThermalSensorReading: 50
|
|
# PCIID: 4318,2661 - the pci stuff doesn't appear to work
|
|
# PCIBus: 2
|
|
# PCIDevice: 0
|
|
# Irq: 30
|
|
foreach my $screen (@screens){
|
|
my $screen2 = $screen;
|
|
$screen2 =~ s/\.[0-9]$//;
|
|
$cmd = '-q GPUCoreTemp -q VideoRam -q GPUCurrentClockFreqs -q PCIECurrentLinkWidth ';
|
|
$cmd .= '-q Irq -q PCIBus -q PCIDevice -q GPUCurrentFanSpeed';
|
|
$cmd = "$path -c $screen2 $cmd 2>/dev/null";
|
|
@data = main::grabber($cmd);
|
|
main::log_data('cmd',$cmd) if $b_log;
|
|
@data = (@data,@data2);
|
|
$j = scalar @gpudata;
|
|
$gpudata[$j] = ({});
|
|
foreach my $item (@data){
|
|
if ($item =~ /^\s*Attribute\s\'([^']+)\'\s.*:\s*([\S]+)\.$/){
|
|
my $attribute = $1;
|
|
my $value = $2;
|
|
$gpudata[$j]{'type'} = 'nvidia';
|
|
$gpudata[$j]{'speed-unit'} = '%';
|
|
$gpudata[$j]{'screen'} = $screen;
|
|
if (!$gpudata[$j]{'temp'} && $attribute eq 'GPUCoreTemp'){
|
|
$gpudata[$j]{'temp'} = $value;
|
|
}
|
|
elsif (!$gpudata[$j]{'ram'} && $attribute eq 'VideoRam'){
|
|
$gpudata[$j]{'ram'} = $value;
|
|
}
|
|
elsif (!$gpudata[$j]{'clock'} && $attribute eq 'GPUCurrentClockFreqs'){
|
|
$gpudata[$j]{'clock'} = $value;
|
|
}
|
|
elsif (!$gpudata[$j]{'bus'} && $attribute eq 'PCIBus'){
|
|
$gpudata[$j]{'bus'} = $value;
|
|
}
|
|
elsif (!$gpudata[$j]{'bus-id'} && $attribute eq 'PCIDevice'){
|
|
$gpudata[$j]{'bus-id'} = $value;
|
|
}
|
|
elsif (!$gpudata[$j]{'fan-speed'} && $attribute eq 'GPUCurrentFanSpeed'){
|
|
$gpudata[$j]{'fan-speed'} = $value;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if ($path = main::check_program('aticonfig')){
|
|
# aticonfig --adapter=0 --od-gettemperature
|
|
@data = main::grabber("$path --adapter=all --od-gettemperature 2>/dev/null");
|
|
foreach (@data){
|
|
if (/Sensor [^0-9]*([0-9\.]+) /){
|
|
$j = scalar @gpudata;
|
|
$gpudata[$j] = ({});
|
|
my $value = $1;
|
|
$gpudata[$j]{'type'} = 'amd';
|
|
$gpudata[$j]{'temp'} = $value;
|
|
}
|
|
}
|
|
}
|
|
if (@sensors_data){
|
|
my ($b_found,$holder) = (0,'');
|
|
foreach (@sensors_data){
|
|
next if (/^Adapter:/ || /^\s*$/);
|
|
if (/^(amdgpu|intel|nouveau|radeon)-pci-(.*)/){
|
|
$b_found = 1;
|
|
$holder = $1;
|
|
$j = scalar @gpudata;
|
|
}
|
|
if ($b_found){
|
|
if (/^temp.*:([0-9]+).*(C|F)/){
|
|
$gpudata[$j]{'temp'} = $1;
|
|
$gpudata[$j]{'type'} = $holder;
|
|
$gpudata[$j]{'unit'} = $2;
|
|
}
|
|
if (/^fan.*:([0-9]+).*(RPM)?/){
|
|
$gpudata[$j]{'fan-speed'} = $1;
|
|
# NOTE: we test for nvidia %, everything else stays with nothing
|
|
$gpudata[$j]{'speed-unit'} = '';
|
|
}
|
|
main::log_data('dump','sensors output: video: @gpudata',\@gpudata);
|
|
}
|
|
if (/^(?:(?!amdgpu|intel|nouveau|radeon).)*-(pci|virtual|isa)-(.*)/){
|
|
$b_found = 0;
|
|
$holder = '';
|
|
}
|
|
}
|
|
}
|
|
# we'll probably use this data elsewhere so make it a one time call
|
|
$b_gpudata = 1;
|
|
# print Data::Dumper::Dumper \@gpudata;
|
|
eval $end if $b_log;
|
|
return @gpudata;
|
|
}
|
|
}
|
|
|
|
## SlotData
|
|
{
|
|
package SlotData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,$key1,$val1);
|
|
my $num = 0;
|
|
my $ref = $alerts{'dmidecode'};
|
|
if ($b_arm){
|
|
$key1 = 'ARM';
|
|
$val1 = main::row_defaults('arm-pci','');
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
elsif ( $$ref{'action'} ne 'use'){
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
$key1 = ucfirst($key1);
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
else {
|
|
@rows = slot_data();
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub slot_data {
|
|
eval $start if $b_log;
|
|
my (@data,@rows);
|
|
my $num = 0;
|
|
foreach (@dmi){
|
|
$num = 1;
|
|
my @ref = @$_;
|
|
if ($ref[0] == 9){
|
|
my ($designation,$id,$length,$type,$usage) = ('','','','','');
|
|
# skip first two row, we don't need that data
|
|
splice @ref, 0, 2 if @ref;
|
|
my $j = scalar @rows;
|
|
foreach my $item (@ref){
|
|
if ($item !~ /^~/){ # skip the indented rows
|
|
my @value = split /:\s+/, $item;
|
|
if ($value[0] eq 'Type'){
|
|
$type = $value[1];
|
|
}
|
|
if ($value[0] eq 'Designation'){
|
|
$designation = $value[1];
|
|
}
|
|
if ($value[0] eq 'Current Usage'){
|
|
$usage = $value[1];
|
|
|
|
}
|
|
if ($value[0] eq 'ID'){
|
|
$id = $value[1];
|
|
}
|
|
if ($extra > 1 && $value[0] eq 'Length'){
|
|
$length = $value[1];
|
|
}
|
|
}
|
|
}
|
|
if ($type){
|
|
$id = 'N/A' if ($id eq '' );
|
|
if ($type eq 'Other' && $designation){
|
|
$type = $designation;
|
|
}
|
|
elsif ($type && $designation) {
|
|
$type = "$type $designation";
|
|
}
|
|
@data = (
|
|
{
|
|
main::key($num++,'Slot') => $id,
|
|
main::key($num++,'type') => $type,
|
|
main::key($num++,'status') => $usage,
|
|
},
|
|
);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 1 ){
|
|
$rows[$j]{main::key($num++,'length')} = $length;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
if (!@rows){
|
|
my $key = 'Message';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('pci-slot-data',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
}
|
|
|
|
## UnmountedData
|
|
{
|
|
package UnmountedData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,$key1,$val1);
|
|
my $num = 0;
|
|
if ($bsd_type){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('unmounted-data-bsd');
|
|
}
|
|
else {
|
|
if (my $file = main::system_files('partitions')){
|
|
@data = unmounted_data($file);
|
|
if (!@data){
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('unmounted-data');
|
|
}
|
|
else {
|
|
@rows = create_output(@data);
|
|
}
|
|
}
|
|
else {
|
|
$key1 = 'Message';
|
|
$val1 = main::row_defaults('unmounted-file');
|
|
}
|
|
}
|
|
if (!@rows && $key1){
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my (@unmounted) = @_;
|
|
my (@data,@rows,$fs);
|
|
my $num = 0;
|
|
@unmounted = sort { $a->{'dev-base'} cmp $b->{'dev-base'} } @unmounted;
|
|
foreach my $ref (@unmounted){
|
|
my %row = %$ref;
|
|
$num = 1;
|
|
my @data2 = main::get_size($row{'size'}) if (defined $row{'size'});
|
|
my $size = (@data2) ? $data2[0] . ' ' . $data2[1]: 'N/A';
|
|
if ($row{'fs'}){
|
|
$fs = lc($row{'fs'});
|
|
}
|
|
else {
|
|
if (main::check_program('file')){
|
|
$fs = ($b_root) ? 'N/A' : main::row_defaults('root-required');
|
|
}
|
|
else {
|
|
$fs = 'requires file';
|
|
}
|
|
}
|
|
@data = ({
|
|
main::key($num++,'ID') => , "/dev/$row{'dev-base'}",
|
|
main::key($num++,'size') => , $size,
|
|
main::key($num++,'fs') => , $fs,
|
|
main::key($num++,'label') => , $row{'label'},
|
|
main::key($num++,'uuid') => , $row{'uuid'},
|
|
});
|
|
@rows = (@rows,@data);
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub unmounted_data {
|
|
eval $start if $b_log;
|
|
my ($file) = @_;
|
|
my ($fs,$label,$size,$uuid,@data,%part,@unmounted);
|
|
my @mounted = ('scd[0-9]+','sr[0-9]+','cdrom[0-9]*','cdrw[0-9]*',
|
|
'dvd[0-9]*','dvdrw[0-9]*','fd[0-9]','ram[0-9]*');
|
|
my @mounts = main::reader($file,'strip');
|
|
my $num = 0;
|
|
PartitionData::set_lsblk() if !$bsd_type && !$b_lsblk;
|
|
# set labels, uuid, gpart
|
|
PartitionData::partition_data() if !$b_partitions;
|
|
PartitionData::set_label_uuid() if !$b_label_uuid;
|
|
RaidData::raid_data() if !$b_raid;
|
|
@mounted = get_mounted(@mounted);
|
|
foreach (@mounts){
|
|
my @working = split /\s+/, $_;
|
|
($fs,$label,$uuid,$size) = ('','','','');
|
|
# note that size 1 means it is a logical extended partition container
|
|
# lvm might have dm-1 type syntax
|
|
# need to exclude loop type file systems, squashfs for example
|
|
# NOTE: nvme needs special treatment because the main device is: nvme0n1
|
|
if ( $working[-1] !~ /^nvme[0-9]+n[0-9]+$/ &&
|
|
$working[-1] =~ /[a-z][0-9]+$|dm-[0-9]+$/ && $working[2] != 1 &&
|
|
$working[-1] !~ /loop/ && !(grep {$working[-1] =~ /$_/} @mounted)){
|
|
%part = PartitionData::check_lsblk($working[-1],0) if (@lsblk && $working[-1]);
|
|
if (%part){
|
|
$fs = $part{'fs'};
|
|
$label = $part{'label'};
|
|
$uuid = $part{'uuid'};
|
|
$size = $part{'size'} if $part{'size'} && !$working[2];
|
|
}
|
|
$size ||= $working[2];
|
|
$fs = unmounted_filesystem($working[-1]) if !$fs;
|
|
$label = PartitionData::get_label("/dev/$working[-1]") if !$label;
|
|
$uuid = PartitionData::get_uuid("/dev/$working[-1]") if !$uuid;
|
|
@data = ({
|
|
'dev-base' => $working[-1],
|
|
'fs' => $fs,
|
|
'label' => $label,
|
|
'size' => $size,
|
|
'uuid' => $uuid,
|
|
});
|
|
@unmounted = (@unmounted,@data);
|
|
}
|
|
}
|
|
# print Data::Dumper::Dumper @unmounted;
|
|
main::log_data('dump','@unmounted',\@unmounted) if $b_log;
|
|
eval $end if $b_log;
|
|
return @unmounted;
|
|
}
|
|
sub get_mounted {
|
|
eval $start if $b_log;
|
|
my (@mounted) = @_;
|
|
foreach my $ref (@partitions){
|
|
my %row = %$ref;
|
|
push @mounted, $row{'dev-base'} if $row{'dev-base'};
|
|
}
|
|
foreach my $ref (@raid){
|
|
my %row = %$ref;
|
|
my $ref2 = $row{'arrays'};
|
|
# we want to not show md0 etc in unmounted report
|
|
push @mounted, $row{'id'} if $row{'id'};
|
|
my @arrays = (ref $ref2 eq 'ARRAY' ) ? @$ref2 : ();
|
|
@arrays = grep {defined $_} @arrays;
|
|
foreach my $array (@arrays){
|
|
my %row2 = %$array;
|
|
my $ref3 = $row2{'components'};
|
|
my @components = (ref $ref3 eq 'ARRAY') ? @$ref3 : ();
|
|
foreach my $component (@components){
|
|
my @temp = split /~/, $component;
|
|
push @mounted, $temp[0];
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @mounted;
|
|
}
|
|
sub unmounted_filesystem {
|
|
eval $start if $b_log;
|
|
my ($item) = @_;
|
|
my ($data,%part);
|
|
my ($file,$fs,$path) = ('','','');
|
|
if ($path = main::check_program('file')) {
|
|
$file = $path;
|
|
}
|
|
# order matters in this test!
|
|
my @filesystems = ('ext2','ext3','ext4','ext5','ext','ntfs',
|
|
'fat32','fat16','FAT\s\(.*\)','vfat','fatx','tfat','swap','btrfs',
|
|
'ffs','hammer','hfs\+','hfs\splus','hfs\sextended\sversion\s[1-9]','hfsj',
|
|
'hfs','jfs','nss','reiserfs','reiser4','ufs2','ufs','xfs','zfs');
|
|
if ($file){
|
|
# this will fail if regular user and no sudo present, but that's fine, it will just return null
|
|
# note the hack that simply slices out the first line if > 1 items found in string
|
|
# also, if grub/lilo is on partition boot sector, no file system data is available
|
|
$data = (main::grabber("$sudo$file -s /dev/$item 2>/dev/null"))[0];
|
|
if ($data){
|
|
foreach (@filesystems){
|
|
if ($data =~ /($_)[\s,]/i){
|
|
$fs = $1;
|
|
$fs = main::trimmer($fs);
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
main::log_data('data',"fs: $fs") if $b_log;
|
|
eval $end if $b_log;
|
|
return $fs;
|
|
}
|
|
}
|
|
|
|
## UsbData
|
|
{
|
|
package UsbData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@data,@rows,$key1,$val1);
|
|
my $num = 0;
|
|
my $ref = $alerts{'lsusb'};
|
|
my $ref2 = $alerts{'usbdevs'};
|
|
if ( $$ref{'action'} ne 'use' && $$ref2{'action'} ne 'use'){
|
|
if ($os eq 'linux' ){
|
|
$key1 = $$ref{'action'};
|
|
$val1 = $$ref{$key1};
|
|
}
|
|
else {
|
|
$key1 = $$ref2{'action'};
|
|
$val1 = $$ref2{$key1};
|
|
}
|
|
$key1 = ucfirst($key1);
|
|
@rows = ({main::key($num++,$key1) => $val1,});
|
|
}
|
|
else {
|
|
@rows = usb_data();
|
|
if (!@rows){
|
|
my $key = 'Message';
|
|
@data = ({
|
|
main::key($num++,$key) => main::row_defaults('usb-data',''),
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub usb_data {
|
|
eval $start if $b_log;
|
|
return if ! @usb;
|
|
my (@data,@row,@rows,$bus_id,$chip_id,$speed,$protocol,$class,$vendor,$product);
|
|
my $num = 0;
|
|
my $j = 0;
|
|
# note: the data has been presorted in set_lsusb_data by:
|
|
# bus id then device id, so we don't need to worry about the order
|
|
foreach my $ref (@usb){
|
|
my @id = @$ref;
|
|
$j = scalar @rows;
|
|
$num = 1;
|
|
$bus_id = "$id[0]:$id[1]";
|
|
$chip_id = $id[2];
|
|
my $b_hub = 0;
|
|
# it's a hub
|
|
if ($id[1] == 1){
|
|
foreach my $line (@id){
|
|
#print "$line\n";
|
|
@row = split /:/, $line;
|
|
next if ! defined $row[0];
|
|
if ($row[0] eq 'bcdUSB' && defined $row[1]){
|
|
$speed = ($row[1] =~ /^[0-9,\.]+$/) ? sprintf("%1.1f",$row[1]) : $row[1];
|
|
}
|
|
elsif ($row[0] eq '~bInterfaceProtocol' && $row[2] ){
|
|
$protocol = $row[2];
|
|
}
|
|
}
|
|
$protocol ||= 'N/A';
|
|
$speed ||= 'N/A';
|
|
#print "pt0:$protocol\n";
|
|
@data = ({
|
|
main::key($num++,'Hub') => $bus_id,
|
|
main::key($num++,'usb') => $speed,
|
|
main::key($num++,'type') => $protocol,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = $chip_id;
|
|
}
|
|
}
|
|
# it's a device
|
|
else {
|
|
($class,$product,$protocol,$vendor,$speed) = ('','','','','');
|
|
foreach my $line (@id){
|
|
@row = split /:/, $line;
|
|
next if ! defined $row[0];
|
|
if ($row[0] eq 'bcdUSB' && defined $row[1]){
|
|
$speed = sprintf("%.1f",$row[1]);
|
|
}
|
|
elsif ($row[0] eq 'bDeviceClass' && defined $row[1] && $row[1] == 9){
|
|
$b_hub = 1;
|
|
}
|
|
elsif ($row[0] eq 'idVendor' && $row[2]){
|
|
$vendor = main::cleaner($row[2]);
|
|
}
|
|
elsif ($row[0] eq 'idProduct' && $row[2]){
|
|
$product = main::cleaner($row[2]);
|
|
}
|
|
# we want hubs to cascade to last item
|
|
elsif ($row[0] eq '~bInterfaceClass' && $row[2] && defined $row[1] && $row[1] != 9){
|
|
$class = main::cleaner($row[2]);
|
|
}
|
|
elsif ($row[0] eq '~bInterfaceProtocol' && defined $row[2]){
|
|
$protocol = $row[2];
|
|
$protocol =~ s/none//i if $protocol;
|
|
last if $class;
|
|
}
|
|
}
|
|
if ( $b_hub ){
|
|
if ($vendor && $product){
|
|
$protocol = "$vendor $product";
|
|
}
|
|
elsif (!$product && $protocol && $vendor){
|
|
$protocol = "$vendor $protocol";
|
|
}
|
|
$speed ||= 'N/A';
|
|
$protocol ||= 'N/A';
|
|
#print "pt2:$protocol\n";
|
|
@data = ({
|
|
main::key($num++,'Hub') => $bus_id,
|
|
main::key($num++,'usb') => $speed,
|
|
main::key($num++,'type') => $protocol,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
}
|
|
else {
|
|
if ($vendor && $product){
|
|
if ($product !~ /$vendor/){
|
|
$product = "$vendor $product";
|
|
}
|
|
}
|
|
elsif (!$product && !$vendor && $protocol){
|
|
$product = $protocol;
|
|
}
|
|
elsif (!$product){
|
|
$product = $vendor;
|
|
}
|
|
# bInterfaceProtocol:0 but $row[2] undefined
|
|
#print "pt3:$class:$product\n";
|
|
# for we want Mass Storage Device instead of Bulk-Only
|
|
# we want to filter out certain protocol values that are less
|
|
# informative than the class type.
|
|
if ($protocol && $class && $class ne $protocol && protocol_filter($protocol) ){
|
|
$class = $protocol;
|
|
}
|
|
$class ||= 'N/A';
|
|
#print "pt3:$class:$product\n";
|
|
$product ||= 'N/A';
|
|
$speed ||= 'N/A';
|
|
$rows[$j]{main::key($num++,'Device')} = $product;
|
|
$rows[$j]{main::key($num++,'bus ID')} = $bus_id;
|
|
if ($extra > 0){
|
|
$rows[$j]{main::key($num++,'usb')} = $speed;
|
|
}
|
|
$rows[$j]{main::key($num++,'type')} = $class;
|
|
}
|
|
if ($extra > 1){
|
|
$rows[$j]{main::key($num++,'chip ID')} = $chip_id;
|
|
}
|
|
}
|
|
}
|
|
#print Data::Dumper::Dumper \@rows;
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub protocol_filter {
|
|
eval $start if $b_log;
|
|
my ($string) = @_;
|
|
$string =~ s/Bulk-Only|streaming|Bidirectional|None//i if $string;
|
|
eval $end if $b_log;
|
|
return $string;
|
|
}
|
|
}
|
|
|
|
## add metric / imperial (us) switch
|
|
## WeatherData
|
|
{
|
|
package WeatherData;
|
|
|
|
sub get {
|
|
eval $start if $b_log;
|
|
my (@rows,$key1,$val1);
|
|
my $num = 0;
|
|
@rows = create_output();
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub create_output {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my (@data,@location,@rows,%weather,);
|
|
my ($conditions) = ('NA');
|
|
if ($show{'weather-location'}){
|
|
my $location_string;
|
|
$location_string = $show{'weather-location'};
|
|
$location_string =~ s/\+/ /g;
|
|
if ( $location_string =~ /,/){
|
|
my @temp = split /,/, $location_string;
|
|
my $sep = '';
|
|
my $string = '';
|
|
foreach (@temp){
|
|
$_ = ucfirst($_);
|
|
$string .= $sep . $_;
|
|
$sep = ', ';
|
|
}
|
|
$location_string = $string;
|
|
}
|
|
$location_string = main::apply_filter($location_string);
|
|
@location = ($show{'weather-location'},$location_string,'');
|
|
}
|
|
else {
|
|
@location = get_location();
|
|
if (!$location[0]) {
|
|
return @rows = ({
|
|
main::key($num++,'Message') => main::row_defaults('weather-null','current location'),
|
|
});
|
|
}
|
|
}
|
|
%weather = get_weather(@location);
|
|
if (!$weather{'weather'}) {
|
|
return @rows = ({
|
|
main::key($num++,'Message') => main::row_defaults('weather-null','weather data'),
|
|
});
|
|
}
|
|
$conditions = "$weather{'weather'}";
|
|
my $temp = unit_output($weather{'temp'},$weather{'temp-c'},'C',$weather{'temp-f'},'F');
|
|
@data = ({
|
|
main::key($num++,'Temperature') => $temp,
|
|
main::key($num++,'Conditions') => $conditions,
|
|
},);
|
|
@rows = (@rows,@data);
|
|
if ($extra > 0){
|
|
my $pressure = unit_output($weather{'pressure'},$weather{'pressure-mb'},'mb',$weather{'pressure-in'},'in');
|
|
my $wind = wind_output($weather{'wind'},$weather{'wind-direction'},$weather{'wind-mph'},$weather{'wind-ms'},
|
|
$weather{'wind-gust-mph'},$weather{'wind-gust-ms'});
|
|
$rows[0]{main::key($num++,'Wind')} = $wind;
|
|
$rows[0]{main::key($num++,'Humidity')} = $weather{'humidity'};
|
|
$rows[0]{main::key($num++,'Pressure')} = $pressure;
|
|
}
|
|
if ($extra > 1){
|
|
if ($weather{'heat-index'}){
|
|
my $heat = unit_output($weather{'heat-index'},$weather{'heat-index-c'},'C',$weather{'heat-index-f'},'F');
|
|
$rows[0]{main::key($num++,'Heat Index')} = $heat;
|
|
}
|
|
if ($weather{'windchill'}){
|
|
my $chill = unit_output($weather{'windchill'},$weather{'windchill-c'},'C',$weather{'windchill-f'},'F');
|
|
$rows[0]{main::key($num++,'Wind Chill')} = $chill ;
|
|
}
|
|
if ($weather{'dewpoint'}){
|
|
my $dew = unit_output($weather{'dewpoint'},$weather{'dewpoint-c'},'C',$weather{'dewpoint-f'},'F');
|
|
$rows[0]{main::key($num++,'Dew Point')} = $dew;
|
|
}
|
|
}
|
|
if ($extra > 2){
|
|
if (!$show{'filter'}){
|
|
$rows[0]{main::key($num++,'Location')} = $location[1];
|
|
$rows[0]{main::key($num++,'altitude')} = elevation_output($weather{'elevation-m'},$weather{'elevation-ft'});
|
|
}
|
|
}
|
|
$rows[0]{main::key($num++,'Current Time')} = $weather{'date-time'};
|
|
if ($extra > 2){
|
|
$rows[0]{main::key($num++,'Observation Time')} = $weather{'observation-time-local'};
|
|
}
|
|
eval $end if $b_log;
|
|
return @rows;
|
|
}
|
|
sub elevation_output {
|
|
eval $start if $b_log;
|
|
my ($meters,$feet) = @_;
|
|
my ($result,$i_unit,$m_unit) = ('','ft','m');
|
|
$feet = sprintf("%.0f", 3.28 * $meters) if defined $meters && !$feet;
|
|
$meters = sprintf("%.1f", $feet / 3.28 ) if defined $feet && !$meters;
|
|
$meters = sprintf("%.0f", $meters) if $meters;
|
|
if ( defined $meters && $weather_unit eq 'mi' ){
|
|
$result = "$meters $m_unit ($feet $i_unit)";
|
|
}
|
|
elsif (defined $meters && $weather_unit eq 'im' ){
|
|
$result = "$feet $i_unit ($meters $m_unit)";
|
|
}
|
|
elsif (defined $meters && $weather_unit eq 'm' ){
|
|
$result = "$meters $m_unit";
|
|
}
|
|
elsif (defined $feet && $weather_unit eq 'i' ){
|
|
$result = "$feet $i_unit";
|
|
}
|
|
else {
|
|
$result = 'N/A';
|
|
}
|
|
eval $end if $b_log;
|
|
return $result;
|
|
}
|
|
sub unit_output {
|
|
eval $start if $b_log;
|
|
my ($primary,$metric,$m_unit,$imperial,$i_unit) = @_;
|
|
my $result = '';
|
|
if ($metric && $imperial && $weather_unit eq 'mi' ){
|
|
$result = "$metric $m_unit ($imperial $i_unit)";
|
|
}
|
|
elsif ($metric && $imperial && $weather_unit eq 'im' ){
|
|
$result = "$imperial $i_unit ($metric $m_unit)";
|
|
}
|
|
elsif ($metric && $weather_unit eq 'm' ){
|
|
$result = "$metric $m_unit";
|
|
}
|
|
elsif ($imperial && $weather_unit eq 'i' ){
|
|
$result = "$imperial $i_unit";
|
|
}
|
|
elsif ($primary){
|
|
$result = $primary;
|
|
}
|
|
else {
|
|
$result = 'N/A';
|
|
}
|
|
eval $end if $b_log;
|
|
return $result;
|
|
}
|
|
sub wind_output {
|
|
eval $start if $b_log;
|
|
my ($primary,$direction,$mph,$ms,$gust_mph,$gust_ms) = @_;
|
|
my ($result,$gust_kmh,$kmh,$i_unit,$m_unit,$km_unit) = ('','','','mph','m/s','km/h');
|
|
# get rid of possible gust values if they are the same as wind values
|
|
$gust_mph = undef if $gust_mph && $mph && $mph eq $gust_mph;
|
|
$gust_ms = undef if $gust_ms && $ms && $ms eq $gust_ms;
|
|
# calculate and round, order matters so that rounding only happens after math done
|
|
$ms = 0.44704 * $mph if $mph && !$ms;
|
|
$mph = $ms * 2.23694 if $ms && !$mph;
|
|
$kmh = sprintf("%.0f", 18 * $ms / 5) if $ms;
|
|
$ms = sprintf("%.1f", $ms ) if $ms; # very low mph speeds yield 0, which is wrong
|
|
$mph = sprintf("%.0f", $mph) if $mph;
|
|
$gust_ms = 0.44704 * $gust_mph if $gust_mph && !$gust_ms;
|
|
$gust_kmh = 18 * $gust_ms / 5 if $gust_ms;
|
|
$gust_mph = $gust_ms * 2.23694 if $gust_ms && !$gust_mph;
|
|
$gust_mph = sprintf("%.0f", $gust_mph) if $gust_mph;
|
|
$gust_kmh = sprintf("%.0f", $gust_kmh) if $gust_kmh;
|
|
$gust_ms = sprintf("%.0f", $gust_ms ) if $gust_ms;
|
|
if (!$mph && $primary){
|
|
$result = $primary;
|
|
}
|
|
elsif ($mph && $direction ){
|
|
if ( $weather_unit eq 'mi' ){
|
|
$result = "from $direction at $ms $m_unit ($kmh $km_unit, $mph $i_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'im' ){
|
|
$result = "from $direction at $mph $i_unit ($ms $m_unit, $kmh $km_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'm' ){
|
|
$result = "from $direction at $ms $m_unit ($kmh $km_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'i' ){
|
|
$result = "from $direction at $mph $i_unit";
|
|
}
|
|
if ($gust_mph){
|
|
if ( $weather_unit eq 'mi' ){
|
|
$result .= ". Gusting to $ms $m_unit ($kmh $km_unit, $mph $i_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'im' ){
|
|
$result .= ". Gusting to $mph $i_unit ($ms $m_unit, $kmh $km_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'm' ){
|
|
$result .= ". Gusting to $ms $m_unit ($kmh $km_unit)";
|
|
}
|
|
elsif ( $weather_unit eq 'i' ){
|
|
$result .= ". Gusting to $mph $i_unit";
|
|
}
|
|
}
|
|
}
|
|
elsif ($primary){
|
|
$result = $primary;
|
|
}
|
|
else {
|
|
$result = 'N/A';
|
|
}
|
|
eval $end if $b_log;
|
|
return $result;
|
|
}
|
|
sub get_weather {
|
|
eval $start if $b_log;
|
|
my (@location) = @_;
|
|
my $now = POSIX::strftime "%Y%m%d%H%M", localtime;
|
|
my ($date_time,$freshness,$tz,@weather_data,%weather);
|
|
my $loc_name = lc($location[0]);
|
|
$loc_name =~ s/-\/|\s|,/-/g;
|
|
$loc_name =~ s/--/-/g;
|
|
my $file_cached = "$user_data_dir/weather-$loc_name.txt";
|
|
if (-f $file_cached){
|
|
@weather_data = main::reader($file_cached);
|
|
$freshness = (split /\^\^/, $weather_data[0])[1];
|
|
#print "$now:$freshness\n";
|
|
}
|
|
if (!$freshness || $freshness < ($now - 90) ) {
|
|
@weather_data = (); # reset so we don't write the previous data to file!!
|
|
my $url = "http://api.wunderground.com/auto/wui/geo/WXCurrentObXML/index.xml?query=$location[0]";
|
|
my $temp;
|
|
# {
|
|
# #my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
|
|
# # my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/feed-oslo-1.xml";
|
|
# local $/;
|
|
# my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
|
|
# open my $fh, '<', $file or die "can't open $file: $!";
|
|
# $temp = <$fh>;
|
|
# }
|
|
$temp = main::download_file('stdout',$url);
|
|
$temp =~ s/\r|\n\n/\n/g;
|
|
my @weather_temp = split /\n/, $temp;
|
|
foreach (@weather_temp){
|
|
chomp $_;
|
|
$_ =~ s/<\/[^>]+>//;
|
|
$_ =~ s/.*icon.*|\r//g;
|
|
$_ =~ s/\s\s/ /g;
|
|
$_ =~ s/^\s+|\s+$//g;
|
|
$_ =~ s/>/^^/;
|
|
$_ =~ s/^<|NA$//g;
|
|
$_ =~ s/^(current|credit|terms|image|title|link|.*_url).*//;
|
|
push @weather_data, $_ if $_ !~ /^\s*$/;
|
|
}
|
|
unshift (@weather_data,("timestamp^^$now"));
|
|
main::writer($file_cached,\@weather_data);
|
|
#print "$file_cached: download/cleaned\n";
|
|
}
|
|
#print join "\n", @weather_data, "\n";
|
|
# NOTE: because temps can be 0, we can't do if value tests
|
|
foreach (@weather_data){
|
|
my @working = split /\s*\^\^\s*/,$_;
|
|
next if ! defined $working[1] || $working[1] eq '';
|
|
if ( $working[0] eq 'dewpoint_string' ){
|
|
$weather{'dewpoint'} = $working[1];
|
|
$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
|
|
$weather{'dewpoint-c'} = $2;;
|
|
$weather{'dewpoint-f'} = $1;;
|
|
}
|
|
elsif ( $working[0] eq 'dewpoint_c' ){
|
|
$weather{'dewpoint-c'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'dewpoint_f' ){
|
|
$weather{'dewpoint-f'} = $working[1];
|
|
}
|
|
# there are two elevations, we want the first one
|
|
elsif (!$weather{'elevation-m'} && $working[0] eq 'elevation'){
|
|
# note: bug in source data uses ft for meters, not 100% of time, but usually
|
|
$weather{'elevation-m'} = $working[1];
|
|
$weather{'elevation-m'} =~ s/\s*(ft|m).*$//;
|
|
}
|
|
elsif ( $working[0] eq 'heat_index_string' ){
|
|
$weather{'heat-index'} = $working[1];
|
|
$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
|
|
$weather{'heat-index-c'} = $2;;
|
|
$weather{'heat-index-f'} = $1;
|
|
}
|
|
elsif ( $working[0] eq 'heat_index_c' ){
|
|
$weather{'heat-index-c'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'heat_index_f' ){
|
|
$weather{'heat-index-f'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'relative_humidity' ){
|
|
$weather{'humidity'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'local_time' ){
|
|
$weather{'local-time'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'local_epoch' ){
|
|
$weather{'local-epoch'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'observation_time_rfc822' ){
|
|
$weather{'observation-time-gmt'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'observation_epoch' ){
|
|
$weather{'observation-epoch'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'observation_time' ){
|
|
$weather{'observation-time-local'} = $working[1];
|
|
$weather{'observation-time-local'} =~ s/Last Updated on //;
|
|
}
|
|
elsif ( $working[0] eq 'pressure_string' ){
|
|
$weather{'pressure'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'pressure_mb' ){
|
|
$weather{'pressure-mb'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'pressure_in' ){
|
|
$weather{'pressure-in'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'temperature_string' ){
|
|
$weather{'temp'} = $working[1];
|
|
$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
|
|
$weather{'temp-c'} = $2;;
|
|
$weather{'temp-f'} = $1;
|
|
# $weather{'temp'} =~ s/\sF/\xB0 F/; # B0
|
|
# $weather{'temp'} =~ s/\sF/\x{2109}/;
|
|
# $weather{'temp'} =~ s/\sC/\x{2103}/;
|
|
}
|
|
elsif ( $working[0] eq 'temp_f' ){
|
|
$weather{'temp-f'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'temp_c' ){
|
|
$weather{'temp-c'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'visibility' ){
|
|
$weather{'visibility'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'visibility_km' ){
|
|
$weather{'visibility-km'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'visibility_mi' ){
|
|
$weather{'visibility-mi'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'weather' ){
|
|
$weather{'weather'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_degrees' ){
|
|
$weather{'wind-degrees'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_dir' ){
|
|
$weather{'wind-direction'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_mph' ){
|
|
$weather{'wind-mph'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_gust_mph' ){
|
|
$weather{'wind-gust-mph'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_gust_ms' ){
|
|
$weather{'wind-gust-ms'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_ms' ){
|
|
$weather{'wind-ms'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'wind_string' ){
|
|
$weather{'wind'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'windchill_string' ){
|
|
$weather{'windchill'} = $working[1];
|
|
$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
|
|
$weather{'windchill-c'} = $2;
|
|
$weather{'windchill-f'} = $1;
|
|
}
|
|
elsif ( $working[0] eq 'windchill_c' ){
|
|
$weather{'windchill-c'} = $working[1];
|
|
}
|
|
elsif ( $working[0] eq 'windchill_f' ){
|
|
$weather{'windchill_f'} = $working[1];
|
|
}
|
|
}
|
|
if ($show{'weather-location'}){
|
|
$weather{'observation-time-local'} =~ /^(.*)\s([\S]+)$/;
|
|
$tz = $2;
|
|
# very clever trick, just make the system think it's in the
|
|
# remote timezone for this local block only
|
|
local $ENV{'TZ'} = $tz;
|
|
$date_time = POSIX::strftime "%c", localtime;
|
|
$weather{'date-time'} = $date_time;
|
|
}
|
|
else {
|
|
$date_time = POSIX::strftime "%c", localtime;
|
|
$tz = ( $location[2] ) ? " ($location[2])" : '';
|
|
$weather{'date-time'} = $date_time . $tz;
|
|
}
|
|
# we get the wrong time using epoch for remote -W location
|
|
if ( !$show{'weather-location'} && $weather{'observation-epoch'}){
|
|
$weather{'observation-time-local'} = POSIX::strftime "%c", localtime($weather{'observation-epoch'});
|
|
}
|
|
return %weather;
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_location {
|
|
eval $start if $b_log;
|
|
my ($city,$country,$freshness,%loc,$loc_arg,$loc_string,@loc_data,$state);
|
|
my $now = POSIX::strftime "%Y%m%d%H%M", localtime;
|
|
my $file_cached = "$user_data_dir/location-main.txt";
|
|
if (-f $file_cached){
|
|
@loc_data = main::reader($file_cached);
|
|
$freshness = (split /\^\^/, $loc_data[0])[1];
|
|
}
|
|
if (!$freshness || $freshness < $now - 90) {
|
|
my $temp;
|
|
my $url = "http://geoip.ubuntu.com/lookup";
|
|
# {
|
|
# local $/;
|
|
# my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/location-1.xml";
|
|
# open my $fh, '<', $file or die "can't open $file: $!";
|
|
# $temp = <$fh>;
|
|
# }
|
|
$temp = main::download_file('stdout',$url);
|
|
@loc_data = split /\n/, $temp;
|
|
@loc_data = map {
|
|
s/<\?.*<Response>//;
|
|
s/<\/[^>]+>/\n/g;
|
|
s/>/^^/g;
|
|
s/<//g;
|
|
$_;
|
|
} @loc_data;
|
|
@loc_data = split /\n/, $loc_data[0];
|
|
unshift (@loc_data,("timestamp^^$now"));
|
|
main::writer($file_cached,\@loc_data);
|
|
#print "$file_cached: download/cleaned\n";
|
|
}
|
|
foreach (@loc_data){
|
|
my @working = split /\s*\^\^\s*/,$_;
|
|
#print "$working[0]:$working[1]\n";
|
|
if ($working[0] eq 'CountryCode3' ) {
|
|
$loc{'country3'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'CountryCode' ) {
|
|
$loc{'country'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'CountryName' ) {
|
|
$loc{'country2'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'RegionCode' ) {
|
|
$loc{'region-id'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'RegionName' ) {
|
|
$loc{'region'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'City' ) {
|
|
$loc{'city'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'ZipPostalCode' ) {
|
|
$loc{'zip'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'Latitude' ) {
|
|
$loc{'lat'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'Longitude' ) {
|
|
$loc{'long'} = $working[1];
|
|
}
|
|
elsif ($working[0] eq 'TimeZone' ) {
|
|
$loc{'tz'} = $working[1];
|
|
}
|
|
}
|
|
#print Data::Dumper::Dumper \%loc;
|
|
# assign location, cascade from most accurate
|
|
# latitude,longitude first
|
|
if ($loc{'lat'} && $loc{'long'}){
|
|
$loc_arg = "$loc{'lat'},$loc{'long'}";
|
|
}
|
|
# city,state next
|
|
elsif ($loc{'city'} && $loc{'region-id'}){
|
|
$loc_arg = "$loc{'city'},$loc{'region-id'}";
|
|
}
|
|
# postal code last, that can be a very large region
|
|
elsif ($loc{'zip'}){
|
|
$loc_arg = $loc{'zip'};
|
|
}
|
|
$country = ($loc{'country3'}) ? $loc{'country3'} : $loc{'country'};
|
|
$city = ($loc{'city'}) ? $loc{'city'} : 'City N/A';
|
|
$state = ($loc{'region-id'}) ? $loc{'region-id'} : 'Region N/A';
|
|
$loc_string = main::apply_filter("$city, $state, $country");
|
|
my @location = ($loc_arg,$loc_string,$loc{'tz'});
|
|
#print ($loc_arg,"\n", join "\n", @loc_data, "\n",scalar @loc_data, "\n");
|
|
eval $end if $b_log;
|
|
return @location;
|
|
}
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### UTILITIES FOR DATA LINES
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub get_compiler_version {
|
|
eval $start if $b_log;
|
|
my (@compiler);
|
|
if (my $file = system_files('version') ) {
|
|
@compiler = get_compiler_version_linux($file);
|
|
}
|
|
else {
|
|
@compiler = get_compiler_version_bsd();
|
|
}
|
|
eval $end if $b_log;
|
|
return @compiler;
|
|
}
|
|
|
|
sub get_compiler_version_bsd {
|
|
eval $start if $b_log;
|
|
my (@compiler,@working);
|
|
if ($alerts{'sysctl'}{'action'} eq 'use'){
|
|
# for dragonfly, we will use free mem, not used because free is 0
|
|
my @working;
|
|
foreach (@sysctl){
|
|
# freebsd seems to use bytes here
|
|
# Not every line will have a : separator though the processor should make
|
|
# most have it. This appears to be 10.x late feature add, I don't see it
|
|
# on earlier BSDs
|
|
if (/^kern.compiler_version/){
|
|
@working = split /:\s*/, $_;
|
|
$working[1] =~ /.*(gcc|clang)\sversion\s([\S]+)\s.*/;
|
|
@compiler = ($1,$2);
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
@compiler = ('N/A','');
|
|
}
|
|
log_data('dump','@compiler',\@compiler) if $b_log;
|
|
eval $end if $b_log;
|
|
return @compiler;
|
|
}
|
|
|
|
sub get_compiler_version_linux {
|
|
eval $start if $b_log;
|
|
my ($file) = @_;
|
|
my (@compiler,$type);
|
|
my @data = reader($file);
|
|
my $result = $data[0] if @data;
|
|
if ($result){
|
|
$result =~ /(gcc|clang).*version\s([\S]+)/;
|
|
# $result = $result =~ /\*(gcc|clang)\*eval\*/;
|
|
if ($1){
|
|
$type = $2;
|
|
$type ||= 'N/A'; # we don't really know what linux clang looks like!
|
|
@compiler = ($1,$type);
|
|
}
|
|
}
|
|
log_data('dump','@compiler',\@compiler) if $b_log;
|
|
|
|
eval $end if $b_log;
|
|
return @compiler;
|
|
}
|
|
|
|
## Get DesktopEnvironment
|
|
## returns array:
|
|
# 0 - desktop name
|
|
# 1 - version
|
|
# 2 - toolkit
|
|
# 3 - toolkit version
|
|
# 4 - info extra desktop data
|
|
# 5 - wm
|
|
{
|
|
package DesktopEnvironment;
|
|
my ($b_xprop,$kde_session_version,$xdg_desktop,@desktop,@data,@xprop);
|
|
sub get {
|
|
# NOTE $XDG_CURRENT_DESKTOP envvar is not reliable, but it shows certain desktops better.
|
|
# most desktops are not using it as of 2014-01-13 (KDE, UNITY, LXDE. Not Gnome)
|
|
$xdg_desktop = ( $ENV{'XDG_CURRENT_DESKTOP'} ) ? lc($ENV{'XDG_CURRENT_DESKTOP'}) : '';
|
|
$kde_session_version = ($ENV{'KDE_SESSION_VERSION'}) ? $ENV{'KDE_SESSION_VERSION'} : '';
|
|
get_kde_data();
|
|
if (!@desktop){
|
|
get_env_de_data();
|
|
}
|
|
if (!@desktop){
|
|
get_env_xprop_de_data();
|
|
}
|
|
if (!@desktop && $b_xprop ){
|
|
get_xprop_de_data();
|
|
}
|
|
if (!@desktop){
|
|
get_ps_de_data();
|
|
}
|
|
if ($extra > 2 && @desktop){
|
|
set_info_data();
|
|
}
|
|
if ($b_display && !$b_force_display && $extra > 2){
|
|
get_wm();
|
|
}
|
|
main::log_data('dump','@desktop', \@desktop) if $b_log;
|
|
# ($b_xprop,$kde_session_version,$xdg_desktop,@data,@xprop) = undef;
|
|
return @desktop;
|
|
}
|
|
sub get_kde_data {
|
|
eval $start if $b_log;
|
|
my ($program,@version_data,@version_data2);
|
|
my $kde_full_session = ($ENV{'KDE_FULL_SESSION'}) ? $ENV{'KDE_FULL_SESSION'} : '';
|
|
return 1 if ($xdg_desktop ne 'kde' && !$kde_session_version && $kde_full_session ne 'true' );
|
|
# works on 4, assume 5 will id the same, why not, no need to update in future
|
|
# KDE_SESSION_VERSION is the integer version of the desktop
|
|
# NOTE: as of plasma 5, the tool: about-distro MAY be available, that will show
|
|
# actual desktop data, so once that's in debian/ubuntu, if it gets in, add that test
|
|
if ($xdg_desktop eq 'kde' || $kde_session_version ){
|
|
if ($kde_session_version && $kde_session_version <= 4){
|
|
@data = main::program_values("kded$kde_session_version");
|
|
if (@data){
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version("kded$kde_session_version",$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
# kded exists, so we can now get the qt data string as well
|
|
if ($desktop[1] && ($program = main::check_program("kded$kde_session_version")) ){
|
|
@version_data = main::grabber("$program --version 2>/dev/null");
|
|
}
|
|
}
|
|
$desktop[0] = 'KDE' if !$desktop[0];
|
|
}
|
|
else {
|
|
# NOTE: this command string is almost certain to change, and break, with next
|
|
# major plasma desktop, ie, 6.
|
|
# qdbus org.kde.plasmashell /MainApplication org.qtproject.Qt.QCoreApplication.applicationVersion
|
|
# Qt: 5.4.2
|
|
# KDE Frameworks: 5.11.0
|
|
# kf5-config: 1.0
|
|
# for QT, and Frameworks if we use it
|
|
if (!@version_data && ($program = main::check_program("kf$kde_session_version-config") )){
|
|
@version_data = main::grabber("$program --version 2>/dev/null");
|
|
}
|
|
if (!@version_data && ($program = main::check_program("kded$kde_session_version"))){
|
|
@version_data = main::grabber("$program --version 2>/dev/null");
|
|
}
|
|
if ($program = main::check_program("plasmashell")){
|
|
@version_data2 = main::grabber("$program --version 2>/dev/null");
|
|
$desktop[1] = main::awk(\@version_data2,'^plasmashell',-1,'\s+');
|
|
}
|
|
$desktop[0] = 'KDE Plasma';
|
|
}
|
|
if (!$desktop[1]){
|
|
$desktop[1] = ($kde_session_version) ? $kde_session_version: main::row_defaults('unknown-desktop-version');
|
|
}
|
|
# print Data::Dumper::Dumper \@version_data;
|
|
if ($extra > 0 && @version_data){
|
|
$desktop[2] = 'Qt';
|
|
$desktop[3] = main::awk(\@version_data,'^Qt:', 2,'\s+');
|
|
}
|
|
}
|
|
# KDE_FULL_SESSION property is only available since KDE 3.5.5.
|
|
elsif ($kde_full_session eq 'true'){
|
|
@version_data = main::grabber("kded --version 2>/dev/null");
|
|
$desktop[0] = 'KDE';
|
|
$desktop[1] = main::awk(\@version_data,'^KDE:',2,'\s+') if @version_data;
|
|
if (!$desktop[1]){
|
|
$desktop[1] = '3.5';
|
|
}
|
|
if ($extra > 0 && @version_data){
|
|
$desktop[2] = 'Qt';
|
|
$desktop[3] = main::awk(\@version_data,'^Qt:',2,'\s+') if @version_data;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_env_de_data {
|
|
eval $start if $b_log;
|
|
my ($program,@version_data);
|
|
|
|
if ($xdg_desktop eq 'unity'){
|
|
@data = main::program_values('unity');
|
|
$desktop[0] = $data[3];
|
|
$desktop[0] ||= 'Unity';
|
|
$desktop[1] = main::program_version('cinnamon',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
set_gtk_data() if $extra > 0;
|
|
}
|
|
elsif ( $xdg_desktop =~ /budgie/ ){
|
|
@data = main::program_values('budgie');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('budgie-desktop',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
set_gtk_data() if $extra > 0;
|
|
}
|
|
elsif ( $xdg_desktop eq 'lxqt' ){
|
|
@data = main::program_values('lxqt');
|
|
$desktop[0] = $data[3];
|
|
$desktop[0] ||= 'LXQT';
|
|
$desktop[1] = main::program_version('lxqt-about',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
if ( $extra > 0 ){
|
|
if ($program = main::check_program("kded$kde_session_version") ){
|
|
@version_data = main::grabber("$program --version 2>/dev/null");
|
|
$desktop[2] = 'Qt';
|
|
$desktop[3] = main::awk(\@version_data,'^Qt:',2);
|
|
}
|
|
elsif ($program = main::check_program("qtdiag") ){
|
|
@data = main::program_values('qtdiag');
|
|
$desktop[3] = main::program_version($program,$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
$desktop[2] = $data[3];
|
|
}
|
|
}
|
|
}
|
|
# note, X-Cinnamon value strikes me as highly likely to change, so just
|
|
# search for the last part
|
|
elsif ( $xdg_desktop =~ /cinnamon/ ){
|
|
@data = main::program_values('cinnamon');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('cinnamon',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
set_gtk_data() if $extra > 0;
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_env_xprop_de_data {
|
|
eval $start if $b_log;
|
|
my ($program,$value,@version_data);
|
|
# NOTE: Always add to set_prop the search term if you add an item!!
|
|
set_xprop();
|
|
# note that cinnamon split from gnome, and and can now be id'ed via xprop,
|
|
# but it will still trigger the next gnome true case, so this needs to go
|
|
# before gnome test eventually this needs to be better organized so all the
|
|
# xprop tests are in the same section, but this is good enough for now.
|
|
# NOTE: was checking for 'muffinr' but that's not part of cinnom
|
|
if ( (main::check_program('muffin') || main::check_program('cinnamon-session') ) &&
|
|
($b_xprop && main::awk(\@xprop,'_muffin') )){
|
|
@data = main::program_values('cinnamon');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('cinnamon',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
set_gtk_data() if $extra > 0;
|
|
$desktop[0] ||= 'Cinnamon';
|
|
}
|
|
elsif ($xdg_desktop eq 'mate' || ( $b_xprop && main::awk(\@xprop,'_marco') )){
|
|
# NOTE: mate-about reported wrong version, 1.18.0 when actual was 1.18.2
|
|
if ($program = main::check_program('mate-session') ) {
|
|
$value = 'mate-session';
|
|
}
|
|
elsif ($program = main::check_program('mate-about')) {
|
|
$value = 'mate-about';
|
|
}
|
|
if ($value){
|
|
@data = main::program_values($value);
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version($program,$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
set_gtk_data() if $extra > 0;
|
|
$desktop[0] ||= 'MATE';
|
|
}
|
|
# note, GNOME_DESKTOP_SESSION_ID is deprecated so we'll see how that works out
|
|
# https://bugzilla.gnome.org/show_bug.cgi?id=542880.
|
|
# NOTE: manjaro is leaving XDG data null, which forces the manual check for gnome, sigh...
|
|
elsif ($xdg_desktop eq 'gnome' || $ENV{'GNOME_DESKTOP_SESSION_ID'} ||
|
|
(main::check_program('gnome-shell') && $b_xprop && main::awk(\@xprop,'^_gnome') ) ){
|
|
if ($program = main::check_program('gnome-about') ) {
|
|
@data = main::program_values('gnome-about');
|
|
$desktop[1] = main::program_version('gnome-about',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif ($program = main::check_program('gnome-shell') ) {
|
|
@data = main::program_values('gnome-shell');
|
|
$desktop[1] = main::program_version('gnome-shell',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
set_gtk_data() if $extra > 0;
|
|
$desktop[0] = ( $data[3] ) ? $data[3] : 'Gnome';
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_xprop_de_data {
|
|
eval $start if $b_log;
|
|
my ($program,@version_data,$version);
|
|
#print join "\n", @xprop, "\n";
|
|
# String: "This is xfdesktop version 4.2.12"
|
|
# alternate: xfce4-about --version > xfce4-about 4.10.0 (Xfce 4.10)
|
|
if ($xdg_desktop eq 'xfce' || main::awk(\@xprop,'xfce' )){
|
|
# this is a very expensive test that doesn't usually result in a find
|
|
# talk to xfce to see what id they will be using for xfce 5
|
|
# if (main::awk(\@xprop, 'xfce4')){
|
|
# $version = '4';
|
|
# }
|
|
if (main::awk(\@xprop, 'xfce5')){
|
|
$version = '5';
|
|
}
|
|
else {
|
|
$version = '4';
|
|
}
|
|
@data = main::program_values('xfdesktop');
|
|
$desktop[0] = $data[3];
|
|
# xfdesktop --version out of x fails to get display, so no data
|
|
@version_data = main::grabber('xfdesktop --version 2>/dev/null');
|
|
# out of x, this error goes to stderr, so it's an empty result
|
|
$desktop[1] = main::awk(\@version_data,$data[0],$data[1],'\s+');
|
|
#$desktop[1] = main::program_version('xfdesktop',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
if ( !$desktop[1] ){
|
|
@data = main::program_values("xfce${version}-panel");
|
|
# print Data::Dumper::Dumper \@data;
|
|
# this returns an error message to stdout in x, which breaks the version
|
|
# xfce4-panel --version out of x fails to get display, so no data
|
|
$desktop[1] = main::program_version("xfce${version}-panel",$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
# out of x this kicks out an error: xfce4-panel: Cannot open display
|
|
$desktop[1] = '' if $desktop[1] !~ /[0-9]\./;
|
|
}
|
|
$desktop[0] ||= 'Xfce';
|
|
$desktop[1] ||= 4;
|
|
if ($extra > 0){
|
|
@data = main::program_values('xfdesktop-toolkit');
|
|
#$desktop[3] = main::program_version('xfdesktop',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
$desktop[3] = main::awk(\@version_data,$data[0],$data[1],'\s+');
|
|
$desktop[2] = $data[3];
|
|
}
|
|
}
|
|
elsif ( (main::check_program('blackbox') || main::check_program('fluxbox')) && main::awk(\@xprop,'blackbox_pid' )){
|
|
if (grep {/fluxbox/} @ps_cmd){
|
|
@data = main::program_values('fluxbox');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('fluxbox',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
else {
|
|
@data = main::program_values('blackbox');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('blackbox',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
}
|
|
# debian package: lxde-core
|
|
elsif ( (main::check_program('lxpanel') || main::check_program('lxqt-session') ||
|
|
main::check_program('razor-session')) && main::awk(\@xprop,'openbox_pid' )){
|
|
# note: openbox-lxde --version may be present, but returns openbox data
|
|
@data = main::program_values('openbox');
|
|
$desktop[1] = main::program_version('openbox',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
if ($xdg_desktop eq 'lxde' || main::awk(\@ps_cmd, 'lxsession')){
|
|
$desktop[1] = "(Openbox $desktop[1])" if $desktop[1];
|
|
$desktop[0] = 'LXDE';
|
|
}
|
|
elsif ($xdg_desktop eq 'razor' || $xdg_desktop eq 'lxqt' || main::awk(\@ps_cmd, 'razor-desktop|lxqt-session')) {
|
|
if (main::awk(\@ps_cmd,'lxqt-session' )){
|
|
$desktop[0] = 'LXQt';
|
|
}
|
|
elsif (main::awk(\@ps_cmd, 'razor-desktop')){
|
|
$desktop[0] = 'Razor-Qt';
|
|
}
|
|
else {
|
|
$desktop[0] = 'LX-Qt-Variant';
|
|
}
|
|
$desktop[1] = "(Openbox $desktop[1])" if $desktop[1];
|
|
}
|
|
else {
|
|
$desktop[0] = 'Openbox';
|
|
}
|
|
}
|
|
elsif (main::check_program('icewm') && main::awk(\@xprop,'icewm' )){
|
|
@data = main::program_values('icewm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('icewm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('enlightenment') && main::awk(\@xprop,'enlightenment' )){
|
|
$desktop[0] = 'Enlightenment';
|
|
# no -v or --version but version is in xprop -root
|
|
# ENLIGHTENMENT_VERSION(STRING) = "Enlightenment 0.16.999.49898"
|
|
$desktop[1] = main::awk(\@xprop,'enlightenment_version',2,'\s+=\s+' );
|
|
$desktop[1] = (split /"/, $desktop[1])[1] if $desktop[1];
|
|
$desktop[1] = (split /\s+/, $desktop[1])[1] if $desktop[1];
|
|
}
|
|
# debian package: i3-wm
|
|
elsif (main::check_program('i3') && main::awk(\@xprop,'^i3_' )){
|
|
@data = main::program_values('i3');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('i3',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
# debian package name: wmaker
|
|
elsif (main::check_program('WindowMaker') && main::awk(\@xprop,'^windowmaker' )){
|
|
@data = main::program_values('wmaker');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('wmaker',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('wm2') && main::awk(\@xprop,'^_wm2' )){
|
|
@data = main::program_values('wm2');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('wm2',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('herbstluftwm') && main::awk(\@xprop,'herbstluftwm' )){
|
|
@data = main::program_values('herbstluftwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('herbstluftwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
# need to check starts line because it's so short
|
|
eval $end if $b_log;
|
|
}
|
|
sub get_ps_de_data {
|
|
eval $start if $b_log;
|
|
my ($program,@version_data);
|
|
if ( main::check_program('fvwm-crystal') && main::awk(\@ps_cmd,'fvwm-crystal' )){
|
|
@data = main::program_values('fvwm-crystal');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('fvwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif ((main::check_program('fvwm2') || main::check_program('fvwm')) && main::awk(\@ps_cmd,'fvwm' )){
|
|
@data = main::program_values('fvwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('fvwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('pekwm') && main::awk(\@ps_cmd,'pekwm' )){
|
|
@data = main::program_values('pekwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('pekwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('awesome') && main::awk(\@ps_cmd,'awesome' )){
|
|
@data = main::program_values('awesome');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('awesome',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
# not in debian apt
|
|
elsif (main::check_program('scrotwm') && main::awk(\@ps_cmd,'scrotwm' )){
|
|
@data = main::program_values('scrotwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('scrotwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('spectrwm') && main::awk(\@ps_cmd,'spectrwm' )){
|
|
@data = main::program_values('spectrwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('spectrwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('twm') && main::awk(\@ps_cmd,'(\s|\/)twm' )){
|
|
# no version
|
|
$desktop[0] = 'Twm';
|
|
}
|
|
# note: built from source, but I assume it will show: /usr/bin/dwm
|
|
elsif (main::check_program('dwm') && main::awk(\@ps_cmd,'(\s|\/)dwm' )){
|
|
@data = main::program_values('dwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('dwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
# not in debian apt, current is wmii, version 3
|
|
elsif (main::check_program('wmii2') && main::awk(\@ps_cmd,'wmii2' )){
|
|
@data = main::program_values('wmii2');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('wmii2',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('wmii') && main::awk(\@ps_cmd,'wmii' )){
|
|
@data = main::program_values('wmii');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('wmii',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('jwm') && main::awk(\@ps_cmd,'(\s|\/)jwm' )){
|
|
@data = main::program_values('jwm');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('jwm',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif (main::check_program('sawfish') && main::awk(\@ps_cmd,'sawfish' )){
|
|
@data = main::program_values('sawfish');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('sawfish',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
elsif ( main::check_program('afterstep') && grep {/afterstep/} @ps_cmd){
|
|
@data = main::program_values('afterstep');
|
|
$desktop[0] = $data[3];
|
|
$desktop[1] = main::program_version('afterstep',$data[0],$data[1],$data[2],$data[5],$data[6]);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub get_wm {
|
|
eval $start if $b_log;
|
|
if ( my $program = main::check_program('wmctrl') ){
|
|
my $cmd = "$program -m 2>/dev/null";
|
|
my @data = main::grabber($cmd,'','strip');
|
|
$desktop[5] = main::awk(\@data,'^Name',2,'\s*:\s*');
|
|
if ($desktop[5]){
|
|
# IceWM 1.3.8 (Linux 3.2.0-4-amd64/i686)
|
|
$desktop[5] =~ s/[0-9]+\.[0-9][\S]+|[\[\(].*[\)\]]//g;
|
|
$desktop[5] = main::trimmer($desktop[5]);
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_gtk_data {
|
|
eval $start if $b_log;
|
|
my ($version,$program,@data);
|
|
# this is a hack, and has to be changed with every toolkit version change, and
|
|
# only dev systems # have this installed, but it's a cross distro command try it.
|
|
if ($program = main::check_program('pkg-config')){
|
|
@data = main::grabber("$program --modversion gtk+-4.0 2>/dev/null");
|
|
$version = main::awk(\@data,'\S');
|
|
# note: opensuse gets null output here, we need the command to get version and output sample
|
|
if ( !$version ){
|
|
@data = main::grabber("$program --modversion gtk+-3.0 2>/dev/null");
|
|
$version = main::awk(\@data,'\S');
|
|
}
|
|
if ( !$version ){
|
|
@data = main::grabber("$program --modversion gtk+-2.0 2>/dev/null");
|
|
$version = main::awk(\@data,'\S');
|
|
}
|
|
}
|
|
# now let's go to more specific version tests, this will never cover everything and that's fine.
|
|
if (!$version){
|
|
# we'll try some known package managers next. dpkg will handle a lot of distros
|
|
# this is the most likely order as of: 2014-01-13. Not going to try to support all
|
|
# package managers too much work, just the very biggest ones.
|
|
if ($program = main::check_program('dpkg')){
|
|
@data = main::grabber("$program -s libgtk-3-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s+');
|
|
# just guessing on gkt 4 package name
|
|
if (!$version){
|
|
@data = main::grabber("$program -s libgtk-4-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s+');
|
|
}
|
|
if (!$version){
|
|
@data = main::grabber("$program -s libgtk2.0-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s+');
|
|
}
|
|
}
|
|
elsif ($program = main::check_program('pacman')){
|
|
@data = main::grabber("$program -Qi gtk3 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
# just guessing on gkt 4 package name
|
|
if (!$version){
|
|
@data = main::grabber("$program -Qi gtk4 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
}
|
|
if (!$version){
|
|
@data = main::grabber("$program -Qi gtk2 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
}
|
|
}
|
|
elsif ($program = main::check_program('rpm')){
|
|
@data = main::grabber("$program -qi libgtk-3-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
# just guessing on gkt 4 package name
|
|
if (!$version){
|
|
@data = main::grabber("$program -qi libgtk-4-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
}
|
|
if (!$version){
|
|
@data = main::grabber("$program -qi libgtk-3-0 2>/dev/null");
|
|
$version = main::awk(\@data,'^\s*Version',2,'\s*:\s*');
|
|
}
|
|
}
|
|
}
|
|
$desktop[2] = 'Gtk';
|
|
eval $end if $b_log;
|
|
}
|
|
sub set_info_data {
|
|
eval $start if $b_log;
|
|
my (@data,@info,$item);
|
|
my $pattern = 'gnome-shell|gnome-panel|kicker|lxpanel|mate-panel|';
|
|
$pattern .= 'plasma-desktop|plasma-netbook|xfce4-panel';
|
|
if (@data = grep {/($pattern)(\s|$)/} @ps_cmd ) {
|
|
# only one entry per type, can be multiple
|
|
foreach $item (@data){
|
|
if (! grep {$item =~ /$_/} @info){
|
|
$item = main::trimmer($item);
|
|
$item =~ s/.*\///;
|
|
push @info, (split /\s+/, $item)[0];
|
|
}
|
|
}
|
|
}
|
|
$desktop[4] = join (',', @info) if @info;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_xprop {
|
|
eval $start if $b_log;
|
|
if (my $program = main::check_program('xprop')){
|
|
@xprop = main::grabber("xprop -root $display_opt 2>/dev/null");
|
|
if (@xprop){
|
|
# add wm / de as required, but only add what is really tested for above
|
|
my $pattern = 'blackbox_pid|enlightenment|^_gnome|herbstluftwm|';
|
|
$pattern .= '^i3_|icewm|_marco|_muffin|openbox_pid|^windowmaker|^_wm2|xfce';
|
|
# let's only do these searches once
|
|
@xprop = grep {/^\S/ && /($pattern)/i} @xprop;
|
|
$_ = lc for @xprop;
|
|
$b_xprop = 1 if scalar @xprop > 0;
|
|
}
|
|
}
|
|
# print "@xprop\n";
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
}
|
|
|
|
sub get_display_manager {
|
|
eval $start if $b_log;
|
|
my (@data,@found,$temp,$working,$b_run,$b_vrun,$b_vrunrc);
|
|
# ldm - LTSP display manager. Note that sddm does not appear to have a .pid
|
|
# extension in Arch note: to avoid positives with directories, test for -f
|
|
# explicitly, not -e
|
|
my @dms = qw(entranced.pid gdm.pid gdm3.pid kdm.pid ldm.pid
|
|
lightdm.pid lxdm.pid mdm.pid nodm.pid pcdm.pid
|
|
sddm.pid slim.lock tint2.pid wdm.pid xdm.pid xenodm.pid);
|
|
# this is the only one I know of so far that has --version
|
|
# lightdm outputs to stderr, so it has to be redirected
|
|
my @dms_version = qw(lightdm);
|
|
$b_run = 1 if -d "/run";
|
|
# in most linux, /var/run is a sym link to /run, so no need to check it twice
|
|
if ( -d "/var/run" ){
|
|
my $rdlink = readlink('/var/run');
|
|
$b_vrun = 1 if $rdlink && $rdlink ne '/run';
|
|
$b_vrunrc = 1 if -d "/var/run/rc.d";
|
|
}
|
|
foreach my $id (@dms){
|
|
# note: $working will create a dir name out of the dm $id, then
|
|
# test if pid is in that note: sddm, in an effort to be unique and special,
|
|
# do not use a pid/lock file, but rather a random string inside a directory
|
|
# called /run/sddm/ so assuming the existence of the pid inside a directory named
|
|
# from the dm. Hopefully this change will not have negative results.
|
|
$working = $id;
|
|
$working =~ s/\.\S+$//;
|
|
# note: there were issues with duplicated dm's in inxi, checking @found corrects it
|
|
if ( ( ( $b_run && ( -f "/run/$id" || -d "/run/$working" ) ) ||
|
|
( $b_vrun && ( -f "/var/run/$id" || -d "/var/run/$working" ) ) ||
|
|
( $b_vrunrc && ( -f "/var/run/rc.d/$working" || -d "/var/run/rc.d/$id" ) ) ) &&
|
|
! grep {/$working/} @found ){
|
|
if ($extra > 2 && awk( \@dms_version, $working) && (my $path = main::check_program($working)) ){
|
|
@data = main::grabber("$path --version 2>&1");
|
|
$temp = awk(\@data,'\S',2,'\s+');
|
|
$working .= ' ' . $temp if $temp;
|
|
}
|
|
push @found, $working;
|
|
}
|
|
}
|
|
if (!@found && grep {/\/usr.*\/x/ && !/\/xprt/} @ps_cmd){
|
|
if (awk (\@ps_cmd, 'startx') ){
|
|
$found[0] = 'startx';
|
|
}
|
|
elsif (awk (\@ps_cmd, 'xinit') ){
|
|
$found[0] = 'xinit';
|
|
}
|
|
}
|
|
# might add this in, but the rate of new dm's makes it more likely it's an
|
|
# unknown dm, so we'll keep output to N/A
|
|
log_data('dump','display manager: @found',\@found) if $b_log;
|
|
eval $end if $b_log;
|
|
return join ',', @found if @found;
|
|
}
|
|
|
|
## Get DistroData
|
|
{
|
|
package DistroData;
|
|
my ($distro);
|
|
sub get {
|
|
eval $start if $b_log;
|
|
if ($bsd_type){
|
|
get_bsd_os();
|
|
}
|
|
else {
|
|
get_linux_distro();
|
|
}
|
|
eval $end if $b_log;
|
|
return $distro;
|
|
}
|
|
|
|
sub get_bsd_os {
|
|
eval $start if $b_log;
|
|
if ($bsd_type eq 'darwin'){
|
|
my $file = '/System/Library/CoreServices/SystemVersion.plist';
|
|
if (-f $file){
|
|
my @data = main::reader($file);
|
|
@data = grep {/(ProductName|ProductVersion)/} @data if @data;
|
|
@data = grep {/<string>/} @data if @data;
|
|
@data = map {s/<[\/]?string>//g; } @data if @data;
|
|
$distro = join (' ', @data);
|
|
}
|
|
}
|
|
else {
|
|
$distro = "$uname[0] $uname[2]";
|
|
}
|
|
eval $end if $b_log;
|
|
return $distro;
|
|
}
|
|
|
|
sub get_linux_distro {
|
|
eval $start if $b_log;
|
|
my ($distro_file) = ('');
|
|
my ($b_osr,@working);
|
|
my @derived = qw(antix-version aptosid-version kanotix-version knoppix-version
|
|
mandrake-release manjaro-release mx-version pardus-release porteus-version sabayon-release
|
|
siduction-version sidux-version slitaz-release solusos-release turbolinux-release
|
|
zenwalk-version);
|
|
my $derived_s = join "|", @derived;
|
|
my @primary = qw(arch-release gentoo-release redhat-release slackware-version
|
|
SuSE-release);
|
|
my $primary_s = join "|", @primary;
|
|
my $exclude_s = 'debian_version|devuan_version|ubuntu_version';
|
|
my $lsb_good_s = 'mandrake-release|mandriva-release|mandrakelinux-release|manjaro-release';
|
|
my $os_release_good_s = 'arch-release|SuSE-release';
|
|
# note: always exceptions, so wild card after release/version:
|
|
# /etc/lsb-release-crunchbang
|
|
# wait to handle since crunchbang file is one of the few in the world that
|
|
# uses this method
|
|
my @distro_files = glob('/etc/*[-_]{[rR]elease,[vV]ersion}*');
|
|
my $lsb_release = '/etc/lsb-release';
|
|
my $issue = '/etc/issue';
|
|
my $os_release = '/etc/os-release';
|
|
my $b_os_release = ( -f $os_release ) ? 1 : 0;
|
|
my $b_lsb = ( -f $lsb_release ) ? 1 : 0;
|
|
main::log_data('dump','@distro_files',\@distro_files) if $b_log;
|
|
if ( scalar @distro_files == 1 ){
|
|
$distro_file = $distro_files[0];
|
|
}
|
|
elsif (scalar @distro_files > 1) {
|
|
# special case, to force manjaro which also has arch-release
|
|
# manjaro should use lsb, which has the full info, arch uses os release
|
|
if (grep {/manjaro/} @distro_files){
|
|
@distro_files = grep {!/arch-release/} @distro_files;
|
|
}
|
|
my $distro_files_s = join "|", @distro_files;
|
|
@working = (@derived,@primary);
|
|
foreach my $file (@working){
|
|
if ( "/etc/$file" =~ /($distro_files_s)$/){
|
|
# Now lets see if the distro file is in the known-good working-lsb-list
|
|
# if so, use lsb-release, if not, then just use the found file
|
|
# this is for only those distro's with self named release/version files
|
|
# because Mint does not use such, it must be done as below
|
|
if ($b_lsb && $file =~ /$lsb_good_s/){
|
|
$distro_file = $lsb_release;
|
|
}
|
|
elsif ($b_os_release && $file =~ /($os_release_good_s)$/){
|
|
$distro_file = $os_release;
|
|
}
|
|
else {
|
|
$distro_file = "/etc/$file";
|
|
}
|
|
last;
|
|
}
|
|
}
|
|
}
|
|
main::log_data('data',"distro_file: $distro_file") if $b_log;
|
|
# first test for the legacy antiX distro id file
|
|
if ( -f '/etc/antiX'){
|
|
@working = main::reader('/etc/antiX');
|
|
$distro = main::awk(\@working,'antix.*\.iso') if @working;
|
|
$distro = main::clean_characters($distro) if $distro;
|
|
}
|
|
# this handles case where only one release/version file was found, and it's lsb-release.
|
|
# This would never apply for ubuntu or debian, which will filter down to the following
|
|
# conditions. In general if there's a specific distro release file available, that's to
|
|
# be preferred, but this is a good backup.
|
|
elsif ($distro_file && $b_lsb && ($distro_file =~ /\/etc\/($lsb_good_s)$/ || $distro_file eq $lsb_release) ){
|
|
$distro = get_lsb_release();
|
|
}
|
|
elsif ($distro_file eq $os_release){
|
|
$distro = get_os_release();
|
|
$b_osr = 1;
|
|
}
|
|
# if distro id file was found and it's not in the exluded primary distro file list, read it
|
|
elsif ( $distro_file && -s $distro_file && $distro_file !~ /\/etc\/($exclude_s)$/){
|
|
# new opensuse uses os-release, but older ones may have a similar syntax, so just use
|
|
# the first line
|
|
if ($distro_file eq '/etc/SuSE-release'){
|
|
# leaving off extra data since all new suse have it, in os-release, this file has
|
|
# line breaks, like os-release but in case we want it, it's:
|
|
# CODENAME = Mantis | VERSION = 12.2
|
|
# for now, just take first occurrence, which should be the first line, which does
|
|
# not use a variable type format
|
|
@working = main::reader($distro_file);
|
|
$distro = main::awk(\@working,'suse');
|
|
$distro = main::clean_characters($distro) if $distro;
|
|
}
|
|
else {
|
|
$distro = (main::reader($distro_file))[0];
|
|
}
|
|
}
|
|
# otherwise try the default debian/ubuntu /etc/issue file
|
|
elsif (-f $issue){
|
|
@working = main::reader($issue);
|
|
my $b_mint = scalar (grep {/mint/i} @working);
|
|
# os-release/lsb gives more manageable and accurate output than issue,
|
|
# but mint should use issue for now.
|
|
if ($b_os_release && !$b_mint){
|
|
$distro = get_os_release();
|
|
$b_osr = 1;
|
|
}
|
|
elsif ($b_lsb && !$b_mint){
|
|
$distro = get_lsb_release();
|
|
}
|
|
else {
|
|
# debian issue can end with weird escapes like \n \l
|
|
@working = main::reader($issue);
|
|
$distro = (map {s/\\[a-z]|,|\*|\\||\"|[:\47]|^\s+|\s+$|n\/a//ig; $_} @working)[0] if @working;
|
|
# this handles an arch bug where /etc/arch-release is empty and /etc/issue
|
|
# is corrupted only older arch installs that have not been updated should
|
|
# have this fallback required, new ones use os-release
|
|
if ( $distro =~ /arch linux/i){
|
|
$distro = 'Arch Linux';
|
|
}
|
|
}
|
|
}
|
|
# a final check. If a long value, before assigning the debugger output, if os-release
|
|
# exists then let's use that if it wasn't tried already. Maybe that will be better.
|
|
# not handling the corrupt data, maybe later if needed
|
|
if ($distro && length($distro) > 50 ){
|
|
if (!$b_osr && $b_os_release){
|
|
$distro = get_os_release();
|
|
}
|
|
}
|
|
# test for /etc/lsb-release as a backup in case of failure, in cases
|
|
# where > one version/release file were found but the above resulted
|
|
# in null distro value.
|
|
if (!$distro){
|
|
if ($b_os_release){
|
|
$distro = get_os_release();
|
|
}
|
|
elsif ($b_lsb){
|
|
$distro = get_lsb_release();
|
|
}
|
|
}
|
|
# now some final null tries
|
|
if (!$distro ){
|
|
# if the file was null but present, which can happen in some cases, then use
|
|
# the file name itself to set the distro value. Why say unknown if we have
|
|
# a pretty good idea, after all?
|
|
if ($distro_file){
|
|
$distro_file =~ s/[-_]|release|version//g;
|
|
}
|
|
}
|
|
## finally, if all else has failed, give up
|
|
$distro ||= 'unknown';
|
|
eval $end if $b_log;
|
|
return $distro;
|
|
}
|
|
sub get_lsb_release {
|
|
eval $start if $b_log;
|
|
my ($distro,$id,$release,$codename,$description) = ('','','','','');
|
|
my @content = main::reader('/etc/lsb-release');
|
|
main::log_data('dump','@content',\@content) if $b_log;
|
|
@content = map {s/,|\*|\\||\"|[:\47]|^\s+|\s+$|n\/a//ig; $_} @content if @content;
|
|
foreach (@content){
|
|
next if /^\s*$/;
|
|
my @working = split /\s*=\s*/, $_;
|
|
next if !$working[0];
|
|
if ($working[0] eq 'DISTRIB_ID' && $working[1]){
|
|
if ($working[1] =~ /^Manjaro/i){
|
|
$id = 'Manjaro Linux';
|
|
}
|
|
# in the old days, arch used lsb_release
|
|
# elsif ($working[1] =~ /^Arch$/i){
|
|
# $id = 'Arch Linux';
|
|
# }
|
|
else {
|
|
$id = $working[1];
|
|
}
|
|
}
|
|
if ($working[0] eq 'DISTRIB_RELEASE' && $working[1]){
|
|
$release = $working[1];
|
|
}
|
|
if ($working[0] eq 'DISTRIB_CODENAME' && $working[1]){
|
|
$codename = $working[1];
|
|
}
|
|
# sometimes some distros cannot do their lsb-release files correctly,
|
|
# so here is one last chance to get it right.
|
|
if ($working[0] eq 'DISTRIB_DESCRIPTION' && $working[1]){
|
|
$description = $working[1];
|
|
}
|
|
}
|
|
if (!$id && !$release && !$codename && $description){
|
|
$distro = $description;
|
|
}
|
|
else {
|
|
$distro = "$id $release $codename";
|
|
$distro =~ s/^\s+|\s\s+|\s+$//g; # get rid of double and trailling spaces
|
|
}
|
|
eval $end if $b_log;
|
|
return $distro;
|
|
}
|
|
sub get_os_release {
|
|
eval $start if $b_log;
|
|
my ($pretty_name,$name,$version_name,$version_id,
|
|
$distro_name,$distro) = ('','','','','','');
|
|
my @content = main::reader('/etc/os-release');
|
|
main::log_data('dump','@content',\@content) if $b_log;
|
|
@content = map {s/\\||\"|[:\47]|^\s+|\s+$|n\/a//ig; $_} @content if @content;
|
|
foreach (@content){
|
|
next if /^\s*$/;
|
|
my @working = split /\s*=\s*/, $_;
|
|
next if !$working[0];
|
|
if ($working[0] eq 'PRETTY_NAME' && $working[1]){
|
|
$pretty_name = $working[1];
|
|
}
|
|
if ($working[0] eq 'NAME' && $working[1]){
|
|
$name = $working[1];
|
|
}
|
|
if ($working[0] eq 'VERSION' && $working[1]){
|
|
$version_name = $working[1];
|
|
}
|
|
if ($working[0] eq 'VERSION_ID' && $working[1]){
|
|
$version_id = $working[1];
|
|
}
|
|
}
|
|
# NOTE: tumbleweed has pretty name but pretty name does not have version id
|
|
if ($pretty_name && $pretty_name !~ /tumbleweed/i){
|
|
$distro = $pretty_name;
|
|
}
|
|
elsif ($name){
|
|
$distro = $name;
|
|
if ($version_name){
|
|
$distro .= ' ' . $version_name;
|
|
}
|
|
elsif ($version_id){
|
|
$distro .= ' ' . $version_id;
|
|
}
|
|
|
|
}
|
|
eval $end if $b_log;
|
|
return $distro;
|
|
}
|
|
}
|
|
|
|
sub get_gcc_data {
|
|
eval $start if $b_log;
|
|
my ($gcc,@data,@gccs,@temp);
|
|
# NOTE: We can't use program_version because we don't yet know where
|
|
# the version number is
|
|
if (my $program = check_program('gcc') ){
|
|
@data = grabber("$program --version 2>/dev/null");
|
|
$gcc = awk(\@data,'^gcc');
|
|
}
|
|
if ($gcc){
|
|
# strip out: gcc (Debian 6.3.0-18) 6.3.0 20170516
|
|
# gcc (GCC) 4.2.2 20070831 prerelease [FreeBSD]
|
|
$gcc =~ s/\([^\)]*\)//g;
|
|
$gcc = get_piece($gcc,2);
|
|
}
|
|
if ($extra > 1){
|
|
# glob /usr/bin for gccs, strip out all non numeric values
|
|
@temp = globber('/usr/bin/gcc-*');
|
|
foreach (@temp){
|
|
if (/\/gcc-([0-9.]+)$/){
|
|
push @gccs, $1;
|
|
}
|
|
}
|
|
}
|
|
unshift @gccs, $gcc;
|
|
log_data('dump','@gccs',\@gccs) if $b_log;
|
|
eval $end if $b_log;
|
|
return @gccs;
|
|
}
|
|
|
|
sub get_hostname {
|
|
eval $start if $b_log;
|
|
my $hostname = '';
|
|
if ( $ENV{'HOSTNAME'} ){
|
|
$hostname = $ENV{'HOSTNAME'};
|
|
}
|
|
elsif ( !$bsd_type && -f "/proc/sys/kernel/hostname" ){
|
|
$hostname = (reader('/proc/sys/kernel/hostname'))[0];
|
|
}
|
|
# puppy removed this from core modules, sigh
|
|
# this is faster than subshell of hostname
|
|
elsif (check_module('Sys::Hostname')){
|
|
import Sys::Hostname;
|
|
$hostname = Sys::Hostname::hostname();
|
|
}
|
|
elsif (my $program = check_program('hostname')) {
|
|
$hostname = (grabber("$program 2>/dev/null"))[0];
|
|
}
|
|
$hostname ||= 'N/A';
|
|
eval $end if $b_log;
|
|
return $hostname;
|
|
}
|
|
|
|
sub get_init_data {
|
|
eval $start if $b_log;
|
|
my $runlevel = get_runlevel_data();
|
|
my $default = ($extra > 1) ? get_runlevel_default() : '';
|
|
my ($init,$init_version,$rc,$rc_version,$program) = ('','','','','');
|
|
my $comm = ( -e '/proc/1/comm' ) ? (reader('/proc/1/comm'))[0] : '';
|
|
my (@data);
|
|
# this test is pretty solid, if pid 1 is owned by systemd, it is systemd
|
|
# otherwise that is 'init', which covers the rest of the init systems.
|
|
# more data may be needed for other init systems.
|
|
if ( $comm ){
|
|
if ( $comm =~ /systemd/ ){
|
|
$init = 'systemd';
|
|
if ( $program = check_program('systemd')){
|
|
$init_version = program_version($program,'^systemd','2','--version');
|
|
}
|
|
if (!$init_version && ($program = check_program('systemctl') ) ){
|
|
$init_version = program_version($program,'^systemd','2','--version');
|
|
}
|
|
}
|
|
# epoch version == Epoch Init System 1.0.1 "Sage"
|
|
elsif ($comm =~ /epoch/){
|
|
$init = 'Epoch';
|
|
$init_version = program_version('epoch', '^Epoch', '4','version');
|
|
}
|
|
# missing data: note, runit can install as a dependency without being the
|
|
# init system: http://smarden.org/runit/sv.8.html
|
|
# NOTE: the proc test won't work on bsds, so if runit is used on bsds we
|
|
# will need more data
|
|
elsif ($comm =~ /runit/){
|
|
$init = 'runit';
|
|
}
|
|
}
|
|
if (!$init){
|
|
# output: /sbin/init --version: init (upstart 1.1)
|
|
# init (upstart 0.6.3)
|
|
if ($init_version = program_version('init', 'upstart', '3','--version')){
|
|
$init = 'Upstart';
|
|
}
|
|
elsif (check_program('launchctl')){
|
|
$init = 'launchd';
|
|
}
|
|
elsif ( -f '/etc/inittab' ){
|
|
$init = 'SysVinit';
|
|
if (check_program('strings')){
|
|
@data = grabber('strings /sbin/init');
|
|
$init_version = awk(\@data,'version\s+[0-9]');
|
|
$init_version = get_piece($init_version,2) if $init_version;
|
|
}
|
|
}
|
|
elsif ( -f '/etc/ttys' ){
|
|
$init = 'init (BSD)';
|
|
}
|
|
}
|
|
if ( grep { /openrc/ } globber('/run/*openrc*') ){
|
|
$rc = 'OpenRC';
|
|
# /sbin/openrc --version == openrc (OpenRC) 0.13
|
|
if ($program = check_program('openrc')){
|
|
$rc_version = program_version($program, '^openrc', '3','--version');
|
|
}
|
|
# /sbin/rc --version == rc (OpenRC) 0.11.8 (Gentoo Linux)
|
|
elsif ($program = check_program('rc')){
|
|
$rc_version = program_version($program, '^rc', '3','--version');
|
|
}
|
|
if ( -e '/run/openrc/softlevel' ){
|
|
$runlevel = (reader('/run/openrc/softlevel'))[0];
|
|
}
|
|
elsif ( -e '/var/run/openrc/softlevel'){
|
|
$runlevel = (reader('/var/run/openrc/softlevel'))[0];
|
|
}
|
|
elsif ( $program = check_program('rc-status')){
|
|
$runlevel = (grabber("$program -r 2>/dev/null"))[0];
|
|
}
|
|
}
|
|
my %init = (
|
|
'init-type' => $init,
|
|
'init-version' => $init_version,
|
|
'rc-type' => $rc,
|
|
'rc-version' => $rc_version,
|
|
'runlevel' => $runlevel,
|
|
'default' => $default,
|
|
);
|
|
eval $end if $b_log;
|
|
return %init;
|
|
}
|
|
|
|
sub get_kernel_data {
|
|
eval $start if $b_log;
|
|
my ($kernel,$ksplice) = ('','');
|
|
# Linux; yawn; 4.9.0-3.1-liquorix-686-pae; #1 ZEN SMP PREEMPT liquorix 4.9-4 (2017-01-14); i686
|
|
# FreeBSD; siwi.pair.com; 8.2-STABLE; FreeBSD 8.2-STABLE #0: Tue May 31 14:36:14 EDT 2016 erik5@iddhi.pair.com:/usr/obj/usr/src/sys/82PAIRx-AMD64; amd64
|
|
if (@uname){
|
|
$kernel = $uname[2];
|
|
if (check_program('uptrack-uname') && $kernel){
|
|
$ksplice = qx(uptrack-uname -rm);
|
|
$ksplice = trimmer($ksplice);
|
|
$kernel = ($ksplice) ? $ksplice . ' (ksplice)' : $kernel;
|
|
}
|
|
$kernel .= ' ' . $uname[-1];
|
|
$kernel = ($bsd_type) ? $uname[0] . ' ' . $kernel : $kernel;
|
|
}
|
|
$kernel ||= 'N/A';
|
|
log_data('data',"kernel: $kernel ksplice: $ksplice") if $b_log;
|
|
eval $end if $b_log;
|
|
return $kernel;
|
|
}
|
|
|
|
sub get_kernel_bits {
|
|
eval $start if $b_log;
|
|
my $bits = '';
|
|
if (@uname){
|
|
$bits = $uname[-1];
|
|
$bits = ($bits =~ /64/ ) ? 64 : 32;
|
|
}
|
|
$bits ||= 'N/A';
|
|
eval $end if $b_log;
|
|
return $bits;
|
|
}
|
|
|
|
sub get_memory_data {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my ($memory);
|
|
if (my $file = system_files('meminfo') ) {
|
|
$memory = get_memory_data_linux($type,$file);
|
|
}
|
|
else {
|
|
$memory = get_memory_data_bsd($type);
|
|
}
|
|
eval $end if $b_log;
|
|
return $memory;
|
|
}
|
|
|
|
sub get_memory_data_linux {
|
|
eval $start if $b_log;
|
|
my ($type,$file) = @_;
|
|
my $memory = '';
|
|
my $total = 0;
|
|
my $not_used = 0;
|
|
my @data = reader($file);
|
|
foreach (@data){
|
|
if ($_ =~ /^MemTotal:/){
|
|
$total = get_piece($_,2);
|
|
}
|
|
elsif ($_ =~ /^(MemFree|Buffers|Cached):/){
|
|
$not_used += get_piece($_,2);
|
|
}
|
|
}
|
|
my $used = $total - $not_used;
|
|
my $percent = ($used && $total) ? sprintf("%.1f", ($used/$total)*100) : '';
|
|
if ($type eq 'string'){
|
|
$percent = " ($percent%)" if $percent;
|
|
$memory = sprintf("%.1f/%.1f MiB", $used/1024, $total/1024) . $percent;
|
|
}
|
|
else {
|
|
$memory = "$total:$used:$percent";
|
|
}
|
|
log_data('data',"memory: $memory") if $b_log;
|
|
eval $end if $b_log;
|
|
return $memory;
|
|
}
|
|
|
|
# openbsd/linux
|
|
# procs memory page disks traps cpu
|
|
# r b w avm fre flt re pi po fr sr wd0 wd1 int sys cs us sy id
|
|
# 0 0 0 55256 1484092 171 0 0 0 0 0 2 0 12 460 39 3 1 96
|
|
# freebsd:
|
|
# procs memory page disks faults cpu
|
|
# r b w avm fre flt re pi po fr sr ad0 ad1 in sy cs us sy id
|
|
# 0 0 0 21880M 6444M 924 32 11 0 822 827 0 0 853 832 463 8 3 88
|
|
# with -H
|
|
# 2 0 0 14925812 936448 36 13 10 0 84 35 0 0 84 30 42 11 3 86
|
|
# dragonfly
|
|
# procs memory page disks faults cpu
|
|
# r b w avm fre flt re pi po fr sr ad0 ad1 in sy cs us sy id
|
|
# 0 0 0 0 84060 30273993 2845 12742 1164 407498171 320960902 0 0 ....
|
|
sub get_memory_data_bsd {
|
|
eval $start if $b_log;
|
|
my ($type) = @_;
|
|
my $memory = '';
|
|
my ($avail,$total,$free_mem,$real_mem) = (0,0,0,0);
|
|
my (@data,$message);
|
|
my $arg = ($bsd_type ne 'openbsd') ? '-H' : '';
|
|
if (my $program = check_program('vmstat')){
|
|
# see above, it's the last line. -H makes it hopefully all in kB so no need
|
|
# for K/M/G tests
|
|
my $row = (grabber("vmstat $arg 2>/dev/null",'\n','strip'))[-1];
|
|
if ( $row ){
|
|
@data = split /\s+/, $row;
|
|
# dragonfly can have 0 avg, but they may fix that so make test dynamic
|
|
if ($data[3] != 0){
|
|
$avail = ($bsd_type ne 'openbsd') ? sprintf ('%.1f',$data[3]/1024) : $data[3];
|
|
}
|
|
elsif ($data[4] != 0){
|
|
$free_mem = sprintf ('%.1f',$data[4]);
|
|
}
|
|
}
|
|
}
|
|
## code to get total goes here:
|
|
my $ref = $alerts{'sysctl'};
|
|
if ($$ref{'action'} eq 'use'){
|
|
# for dragonfly, we will use free mem, not used because free is 0
|
|
my @working;
|
|
foreach (@sysctl){
|
|
# freebsd seems to use bytes here
|
|
if (!$real_mem && /^hw.physmem:/){
|
|
@working = split /:\s*/,$_;
|
|
#if ($working[1]){
|
|
$working[1] =~ s/^[^0-9]+|[^0-9]+$//g;
|
|
$real_mem = sprintf("%.1f", $working[1]/1024);
|
|
#}
|
|
last if $free_mem;
|
|
}
|
|
# But, it uses K here. Openbsd/Dragonfly do not seem to have this item
|
|
# this can be either: Free Memory OR Free Memory Pages
|
|
elsif (/^Free Memory:/){
|
|
@working = split /:\s*/,$_;
|
|
$working[1] =~ s/[^0-9]+//g;
|
|
$free_mem = sprintf("%.1f", $working[1]);
|
|
last if $real_mem;
|
|
}
|
|
}
|
|
}
|
|
else {
|
|
$message = "sysctl $$ref{'action'}"
|
|
}
|
|
# not using, but leave in place for a bit in case we want it
|
|
# my $type = ($free_mem) ? ' free':'' ;
|
|
# hack: temp fix for openbsd/darwin: in case no free mem was detected but we have physmem
|
|
if (($avail || $free_mem) && !$real_mem){
|
|
my $error = ($message) ? $message: 'total N/A';
|
|
my $used = (!$free_mem) ? $avail : $real_mem - $free_mem;
|
|
if ($type eq 'string'){
|
|
$used = sprintf("%.1f",$used/1024);
|
|
$memory = "$used/($error) MB";
|
|
}
|
|
else {
|
|
$memory = "$error:$used:";
|
|
}
|
|
}
|
|
# use openbsd/dragonfly avail mem data if available
|
|
elsif (($avail || $free_mem) && $real_mem) {
|
|
my $used = (!$free_mem) ? $avail : $real_mem - $free_mem;
|
|
my $percent = ($used && $real_mem) ? sprintf("%.1f", ($used/$real_mem)*100) : '';
|
|
if ($type eq 'string'){
|
|
$used = sprintf("%.1f",$used/1024);
|
|
$real_mem = sprintf("%.1f",$real_mem/1024);
|
|
$percent = " ($percent)" if $percent;
|
|
$memory = "$used/$real_mem MB" . $percent;
|
|
}
|
|
else {
|
|
$memory = "$real_mem:$used:$percent";
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $memory;
|
|
}
|
|
|
|
sub get_module_version {
|
|
eval $start if $b_log;
|
|
my ($module) = @_;
|
|
return if ! $module;
|
|
my ($version);
|
|
my $path = "/sys/module/$module/version";
|
|
if (-f $path){
|
|
$version = (reader($path))[0];
|
|
}
|
|
elsif (-f "/sys/module/$module/uevent"){
|
|
$version = 'kernel';
|
|
}
|
|
#print "version:$version\n";
|
|
if (!$version) {
|
|
if (my $path = check_program('modinfo')){
|
|
my @data = grabber("$path $module 2>/dev/null");
|
|
$version = awk(\@data,'^version',2,':\s+') if @data;
|
|
}
|
|
}
|
|
$version ||= '';
|
|
eval $end if $b_log;
|
|
return $version;
|
|
}
|
|
|
|
# # check? /var/run/nologin for bsds?
|
|
sub get_runlevel_data {
|
|
eval $start if $b_log;
|
|
my $runlevel = '';
|
|
if ( my $program = check_program('runlevel')){
|
|
$runlevel = (grabber("$program 2>/dev/null"))[0];
|
|
$runlevel =~ s/[^\d]//g if $runlevel;
|
|
#print_line($runlevel . ";;");
|
|
}
|
|
eval $end if $b_log;
|
|
return $runlevel;
|
|
}
|
|
|
|
# note: it appears that at least as of 2014-01-13, /etc/inittab is going
|
|
# to be used for default runlevel in upstart/sysvinit. systemd default is
|
|
# not always set so check to see if it's linked.
|
|
sub get_runlevel_default {
|
|
eval $start if $b_log;
|
|
my @data;
|
|
my $default = '';
|
|
my $b_systemd = 0;
|
|
my $inittab = '/etc/inittab';
|
|
my $systemd = '/etc/systemd/system/default.target';
|
|
my $upstart = '/etc/init/rc-sysinit.conf';
|
|
# note: systemd systems do not necessarily have this link created
|
|
if ( -e $systemd){
|
|
$default = readlink($systemd);
|
|
$default =~ s/.*\/// if $default;
|
|
$b_systemd = 1;
|
|
}
|
|
# http://askubuntu.com/questions/86483/how-can-i-see-or-change-default-run-level
|
|
# note that technically default can be changed at boot but for inxi purposes
|
|
# that does not matter, we just want to know the system default
|
|
elsif ( -e $upstart){
|
|
# env DEFAULT_RUNLEVEL=2
|
|
@data = reader($upstart);
|
|
$default = awk(\@data,'^env\s+DEFAULT_RUNLEVEL',2,'=');
|
|
}
|
|
# handle weird cases where null but inittab exists
|
|
if (!$default && -e $inittab ){
|
|
@data = reader($inittab);
|
|
$default = awk(\@data,'^id.*initdefault',2,':');
|
|
}
|
|
eval $end if $b_log;
|
|
return $default;
|
|
}
|
|
|
|
sub get_self_version {
|
|
eval $start if $b_log;
|
|
my $patch = $self_patch;
|
|
if ( $patch ne '' ){
|
|
# for cases where it was for example: 00-b1 clean to -b1
|
|
$patch =~ s/^[0]+-?//;
|
|
$patch = "-$patch" if $patch;
|
|
}
|
|
eval $end if $b_log;
|
|
return $self_version . $patch;
|
|
}
|
|
|
|
sub get_shell_data {
|
|
eval $start if $b_log;
|
|
my ($ppid) = @_;
|
|
my $cmd = "ps -p $ppid -o comm= 2>/dev/null";
|
|
my $shell = qx($cmd);
|
|
log_data('cmd',$cmd) if $b_log;
|
|
chomp($shell);
|
|
if ($shell){
|
|
#print "shell pre: $shell\n";
|
|
# when run in debugger subshell, would return sh as shell,
|
|
# and parent as perl, that is, pinxi itself, which is actually right.
|
|
# trim leading /.../ off just in case. ps -p should return the name, not path
|
|
# but at least one user dataset suggests otherwise so just do it for all.
|
|
$shell =~ s/^.*\///;
|
|
my $working = $ENV{'SHELL'};
|
|
$working =~ s/^.*\///;
|
|
# NOTE: su -c "inxi -F" results in shell being su
|
|
if (($shell eq 'sh' || $shell eq 'sudo' || $shell eq 'su' ) && $shell ne $working){
|
|
$client{'su-start'} = $shell if ($shell eq 'sudo' || $shell eq 'su');
|
|
$shell = $working;
|
|
}
|
|
#print "shell post: $shell\n";
|
|
# sh because -v/--version doesn't work on it
|
|
if ( $shell ne 'sh' ) {
|
|
@app = main::program_values(lc($shell));
|
|
if ($app[0]){
|
|
$client{'version'} = main::program_version($shell,$app[0],$app[1],$app[2],$app[5],$app[6]);
|
|
}
|
|
# guess that it's two and --version
|
|
else {
|
|
# we're just guessing at the search phrase and position
|
|
if ($shell){
|
|
$client{'version'} = main::program_version($shell,$shell,2,'');
|
|
}
|
|
else {
|
|
$client{'version'} = row_defaults('unknown-shell');
|
|
}
|
|
}
|
|
$client{'version'} =~ s/(\(.*|-release|-version)//;
|
|
}
|
|
$client{'name'} = lc($shell);
|
|
$client{'name-print'} = $shell;
|
|
}
|
|
else {
|
|
$client{'name'} = 'shell';
|
|
$client{'name-print'} = 'Unknown Shell';
|
|
}
|
|
$client{'su-start'} = 'sudo' if (!$client{'su-start'} && $ENV{'SUDO_USER'});
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub get_shell_source {
|
|
eval $start if $b_log;
|
|
my (@data);
|
|
my ($msg,$self_parent,$shell_parent) = ('','','');
|
|
my $ppid = getppid();
|
|
$self_parent = get_start_parent($ppid);
|
|
if ($b_log){
|
|
$msg = ($ppid) ? "self parent: $self_parent ppid: $ppid": "self parent: undefined";
|
|
log_data('data',$msg);
|
|
}
|
|
#print "self parent: $self_parent ppid: $ppid\n";
|
|
if ($self_parent){
|
|
$shell_parent = get_shell_parent($self_parent);
|
|
$client{'su-start'} = $shell_parent if ($shell_parent eq 'su' && !$client{'su-start'});
|
|
#print "shell parent 1: $shell_parent\n";
|
|
if ($b_log){
|
|
$msg = ($shell_parent) ? "shell parent 1: $shell_parent": "shell parent 1: undefined";
|
|
log_data('data',$msg);
|
|
}
|
|
# in case sudo starts inxi, parent is shell (or perl inxi if run by debugger)
|
|
if ( $shell_parent && ( $shell_parent eq 'su' ||
|
|
$shell_parent =~ /^(bash|csh|ksh|lksh|loksh|mksh|pdksh|sh|dash|perl|zsh|tcsh)$/ ) ){
|
|
my $shell = $1; # we want the first set only if shell is parent
|
|
# no idea why have to do script_parent action twice in su case, but you do.
|
|
$self_parent = get_start_parent($self_parent);
|
|
$shell_parent = get_shell_parent($self_parent) if $shell;
|
|
#print "shell parent 2: $shell_parent\n";
|
|
if ($b_log){
|
|
$msg = ($shell_parent) ? "shell parent 2: $shell_parent": "shell parent 2: undefined";
|
|
log_data('data',$msg);
|
|
}
|
|
if (!$shell ||
|
|
$shell_parent =~ /^(bash|csh|ksh|lksh|loksh|mksh|pdksh|sh|dash|perl|zsh|tcsh)$/ ){
|
|
$self_parent = get_start_parent($self_parent);
|
|
$shell_parent = get_shell_parent($self_parent);
|
|
}
|
|
#print "shell parent 3: $shell_parent\n";
|
|
if ($b_log){
|
|
$msg = ($shell_parent) ? "shell parent 3: $shell_parent": "shell parent 3: undefined";
|
|
log_data('data',$msg);
|
|
}
|
|
}
|
|
# to work around a ps -p or gnome-terminal bug, which returns
|
|
# gnome-terminal- trim - off end
|
|
$shell_parent =~ s/-$//;
|
|
}
|
|
if ($b_log){
|
|
$self_parent ||= '';
|
|
$shell_parent ||= '';
|
|
log_data('data',"parents: self: $self_parent shell: $shell_parent");
|
|
}
|
|
eval $end if $b_log;
|
|
return $shell_parent;
|
|
}
|
|
|
|
# utilities for get_shell_source
|
|
# arg: 1 - parent id
|
|
sub get_start_parent {
|
|
eval $start if $b_log;
|
|
my ($parent) = @_;
|
|
# ps -j -fp : bsds ps do not have -f for PPID, so we can't get the ppid
|
|
my $cmd = "ps -j -fp $parent";
|
|
log_data('cmd',$cmd) if $b_log;
|
|
my @data = grabber($cmd);
|
|
#shift @data if @data;
|
|
my $self_parent = awk(\@data,"$parent",3,'\s+');
|
|
eval $end if $b_log;
|
|
return $self_parent;
|
|
}
|
|
|
|
# arg: 1 - parent id
|
|
sub get_shell_parent {
|
|
eval $start if $b_log;
|
|
my ($parent) = @_;
|
|
my $cmd = "ps -j -p $parent";
|
|
log_data('cmd',$cmd) if $b_log;
|
|
my @data = grabber($cmd,'strip');
|
|
#shift @data if @data;
|
|
my $shell_parent = awk(\@data, "$parent",-1,'\s+');
|
|
eval $end if $b_log;
|
|
return $shell_parent;
|
|
}
|
|
|
|
# this will test against default IP like: (:0) vs full IP to determine
|
|
# ssh status. Surprisingly easy test? Cross platform
|
|
sub get_ssh_status {
|
|
eval $start if $b_log;
|
|
my ($b_ssh,$ssh);
|
|
# fred pts/10 2018-03-24 16:20 (:0.0)
|
|
# fred-remote pts/1 2018-03-27 17:13 (43.43.43.43)
|
|
if (my $program = check_program('who')){
|
|
$ssh = (grabber("$program am i 2>/dev/null"))[0];
|
|
# crude IP validation
|
|
if ($ssh && $ssh =~ /\(([:0-9a-f]{8,}|[1-9][\.0-9]{6,})\)$/){
|
|
$b_ssh = 1;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $b_ssh;
|
|
}
|
|
|
|
sub get_tty_console_irc {
|
|
eval $start if $b_log;
|
|
return $tty_session if $tty_session;
|
|
my $ppid = getppid();
|
|
$tty_session = awk(\@ps_aux,".*$ppid.*$client{'name'}",7,'\s+');
|
|
$tty_session =~ s/^[^[0-9]+// if $tty_session;
|
|
$tty_session = '' if ! defined $tty_session;
|
|
log_data('data',"conole-irc-tty:$tty_session") if $b_log;
|
|
eval $end if $b_log;
|
|
return $tty_session;
|
|
}
|
|
|
|
sub get_tty_number {
|
|
eval $start if $b_log;
|
|
my $tty = POSIX::ttyname(1);
|
|
#variants: /dev/pts/1 /dev/tty1 /dev/ttyp2 /dev/ttyra [hex number a]
|
|
$tty =~ s/.*\/[^0-9]*//g if defined $tty;
|
|
$tty = '' if ! defined $tty;
|
|
log_data('data',"tty:$tty") if $b_log;
|
|
eval $end if $b_log;
|
|
return $tty;
|
|
}
|
|
|
|
# 2:58PM up 437 days, 8:18, 3 users, load averages: 2.03, 1.72, 1.77
|
|
# 04:29:08 up 3:18, 3 users, load average: 0,00, 0,00, 0,00
|
|
# 10:23PM up 5 days, 16:17, 1 user, load averages: 0.85, 0.90, 1.00
|
|
# 05:36:47 up 1 day, 3:28, 4 users, load average: 1,88, 0,98, 0,62
|
|
# 05:36:47 up 1 day, 3 min, 4 users, load average: 1,88, 0,98, 0,62
|
|
sub get_uptime {
|
|
eval $start if $b_log;
|
|
my ($days,$hours,$minutes,$uptime) = ('','','','');
|
|
if (check_program('uptime')){
|
|
$uptime = qx(uptime);
|
|
$uptime = trimmer($uptime);
|
|
#$uptime = '05:36:47 up 3 min, 4 users, load average: 1,88, 0,98, 0,62';
|
|
if ($uptime &&
|
|
$uptime =~ /[\S]+\s+up\s+(([0-9]+)\s+day[s]?,\s+)?(([0-9]{1,2}):([0-9]{1,2})|([0-9]+)\smin[s]?),\s+[0-9]+\s+user/){
|
|
$days = $2 . 'd' if $2;
|
|
$days .= ' ' if ($days && ($4 || $6));
|
|
if ($4 && $5){
|
|
$hours = $4 . 'h ';
|
|
$minutes = $5 . 'm';
|
|
}
|
|
elsif ($6){
|
|
$minutes = $6 . 'm';
|
|
|
|
}
|
|
$uptime = $days . $hours . $minutes;
|
|
}
|
|
}
|
|
$uptime ||= 'N/A';
|
|
eval $end if $b_log;
|
|
return $uptime;
|
|
}
|
|
|
|
# NOTE: annoyingly, /sys does NOT actually use the id, it uses
|
|
# the count of physical devices, starting at 0 for hub, on the bus.
|
|
# args: $1 - $bus number; $2 - vendor:chip id
|
|
sub get_usb_drivers {
|
|
eval $start if $b_log;
|
|
my ($bus,$id) = @_;
|
|
return if !$bus || !$id;# these will be > 0
|
|
my ($chip,$driver,$file,$path,$vendor,$working,$working2,@drivers,@temp);
|
|
@temp = split /:/, $id;
|
|
$vendor = $temp[0];
|
|
$chip = $temp[1];
|
|
# some have it one level deeper than others
|
|
my @globs = ("/sys/bus/usb/devices/usb$bus/$bus-*/","/sys/bus/usb/devices/usb$bus/$bus-*/$bus-*/");
|
|
foreach (@globs){
|
|
$path = get_usb_path($vendor,$chip,$_);
|
|
last if $path;
|
|
}
|
|
if ($path){
|
|
if ( -e "${path}driver"){
|
|
if ($working = Cwd::abs_path("${path}driver")){
|
|
$working =~ s/^.*\///;
|
|
if ($working && $working ne 'usb' && $working ne 'usbhid'){
|
|
push @drivers, $working;
|
|
}
|
|
}
|
|
}
|
|
# test 2
|
|
@temp = main::globber("$path$bus-*/");
|
|
#print "@temp\n";
|
|
foreach (@temp){
|
|
#print "p2:". $_ . "driver\n";
|
|
$file = $_ . 'driver';
|
|
#print "f:$file\n";
|
|
if (-e $file){
|
|
#print "here\n";
|
|
#print (Cwd::abs_path($file), "\n");
|
|
if ($working = Cwd::abs_path($file)){
|
|
#print "w:$working\n";
|
|
$working =~ s/^.*\///;
|
|
if ($working && $working ne 'usb' && $working ne 'usbhid' && ! grep {/$working/} @drivers){
|
|
push @drivers, $working;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
#print join "\n", @drivers, "\n";
|
|
$driver = join ',', @drivers if @drivers;
|
|
}
|
|
@temp = ($driver,$path);
|
|
eval $end if $b_log;
|
|
return @temp;
|
|
}
|
|
|
|
sub get_usb_path {
|
|
eval $start if $b_log;
|
|
my ($vendor,$chip,$glob) = @_;
|
|
my ($path,$working,$working2);
|
|
#print "$vendor,$chip,$glob\n";
|
|
my @temp = main::globber($glob);
|
|
#print join "\n", @temp, "\n";
|
|
# first we need to get the device path, since it's not predictable
|
|
foreach (@temp){
|
|
#print "$_\n";
|
|
$working = $_ . 'idVendor';
|
|
$working2 = $_ . 'idProduct';
|
|
if (-e $working && (main::reader($working))[0] eq $vendor &&
|
|
-e $working2 && (main::reader($working2))[0] eq $chip){
|
|
$path = $_;
|
|
#print "$_\n";
|
|
last;
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
return $path
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### INITIALIZE DATA VALUES
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub set_dmesg_boot_data {
|
|
eval $start if $b_log;
|
|
my ($file,@temp);
|
|
my ($counter) = (0);
|
|
$b_dmesg_boot_check = 1;
|
|
if (!$b_fake_dboot){
|
|
$file = system_files('dmesg-boot');
|
|
}
|
|
else {
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmesg-boot/bsd-disks-diabolus.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmesg-boot/freebsd-disks-solestar.txt";
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmesg-boot/freebsd-enceladus-1.txt";
|
|
## matches: toshiba: openbsd-5.6-sysctl-2.txt
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmesg-boot/openbsd-5.6-dmesg.boot-1.txt";
|
|
## matches: compaq: openbsd-5.6-sysctl-1.txt"
|
|
$file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmesg-boot/openbsd-dmesg.boot-1.txt";
|
|
}
|
|
if ($file){
|
|
return if ! -r $file;
|
|
@dmesg_boot = reader($file);
|
|
# some dmesg repeats, so we need to dump the second and > iterations
|
|
# replace all indented items with ~ so we can id them easily while
|
|
# processing note that if user, may get error of read permissions
|
|
# for some weird reason, real mem and avail mem are use a '=' separator,
|
|
# who knows why, the others are ':'
|
|
foreach (@dmesg_boot){
|
|
$counter++ if /^(OpenBSD|DragonFly|FreeBSD is a registered trademark)/;
|
|
last if $counter > 1;
|
|
$_ =~ s/\s*=\s*|:\s*/:/;
|
|
$_ =~ s/\"//g;
|
|
$_ =~ s/^\s+/~/;
|
|
$_ =~ s/\s\s/ /g;
|
|
$_ =~ s/^(\S+)\sat\s/$1:at /; # ada0 at ahcich0
|
|
push @temp, $_;
|
|
if (/^bios[0-9]:(at|vendor)/){
|
|
push @sysctl_machine, $_;
|
|
}
|
|
}
|
|
@dmesg_boot = @temp;
|
|
# FreeBSD: 'da*' is a USB device 'ada*' is a SATA device 'mmcsd*' is an SD card
|
|
if ($b_dm_boot_disk && @dmesg_boot){
|
|
@dm_boot_disk = grep {/^(ad|ada|da|mmcblk|mmcsd|nvme[0-9]+n|sd|wd)[0-9]+(:|\sat\s)/} @dmesg_boot;
|
|
log_data('dump','@dm_boot_disk',\@dm_boot_disk) if $b_log;
|
|
print Dumper \@dm_boot_disk if $test[9];
|
|
}
|
|
if ($b_dm_boot_optical && @dmesg_boot){
|
|
@dm_boot_optical = grep {/^(cd)[0-9]+(\([^)]+\))?(:|\sat\s)/} @dmesg_boot;
|
|
log_data('dump','@dm_boot_optical',\@dm_boot_optical) if $b_log;
|
|
print Dumper \@dm_boot_optical if $test[9];
|
|
}
|
|
}
|
|
log_data('dump','@dmesg_boot',\@dmesg_boot) if $b_log;
|
|
#print Dumper \@dmesg_boot if $test[9];
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# note, all actual tests have already been run in check_tools so if we
|
|
# got here, we're good.
|
|
sub set_dmi_data {
|
|
eval $start if $b_log;
|
|
if ($alerts{'dmidecode'}{'action'} eq 'use' ){
|
|
set_dmidecode_data();
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_dmidecode_data {
|
|
eval $start if $b_log;
|
|
my ($content,@data,@working,$type,$handle);
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/dmidecode/pci-freebsd-8.2-2";
|
|
#open my $fh, '<', $file or die "can't open $file: $!";
|
|
#chomp(@data = <$fh>);
|
|
my $path = check_program('dmidecode');
|
|
$content = qx($path 2>/dev/null) if $path;
|
|
@data = split /\n/, $content;
|
|
# we don't need the opener lines of dmidecode output
|
|
# but we do want to preserve the indentation. Empty lines
|
|
# won't matter, they will be skipped, so no need to handle them.
|
|
# some dmidecodes do not use empty line separators
|
|
splice @data, 0, 5 if @data;
|
|
my $j = 0;
|
|
my $b_skip = 1;
|
|
foreach (@data){
|
|
if (!/^Hand/){
|
|
next if $b_skip;
|
|
if (/^[^\s]/){
|
|
$_ = lc($_);
|
|
$_ =~ s/\s(information)//;
|
|
push @working, $_;
|
|
}
|
|
elsif (/^\t/){
|
|
$_ =~ s/^\t\t/~/;
|
|
$_ =~ s/^\t|\s+$//g;
|
|
push @working, $_;
|
|
}
|
|
}
|
|
elsif (/^Handle\s(0x[0-9A-Fa-f]+).*DMI\stype\s([0-9]+),.*/){
|
|
$j = scalar @dmi;
|
|
$handle = hex($1);
|
|
$type = $2;
|
|
$b_skip = ( $type > 126 )? 1 : 0;
|
|
next if $b_skip;
|
|
# we don't need 32, system boot, or 127, end of table
|
|
if (@working){
|
|
if ($working[0] != 32 && $working[0] < 127){
|
|
$dmi[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
}
|
|
@working = ($type,$handle);
|
|
}
|
|
}
|
|
if (@working && $working[0] != 32 && $working[0] != 127){
|
|
$j = scalar @dmi;
|
|
$dmi[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
# last by not least, sort it by dmi type, now we don't have to worry
|
|
# about random dmi type ordering in the data, which happens. Also sort
|
|
# by handle, as secondary sort.
|
|
@dmi = sort { $a->[0] <=> $b->[0] || $a->[1] <=> $b->[1] } @dmi;
|
|
main::log_data('dump','@dmi',\@dmi) if $b_log;
|
|
print Dumper \@dmi if $test[2];
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_ip_data {
|
|
eval $start if $b_log;
|
|
if ($alerts{'ip'}{'action'} eq 'use' ){
|
|
set_ip_addr();
|
|
}
|
|
elsif ($alerts{'ifconfig'}{'action'} eq 'use'){
|
|
set_ifconfig();
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_ip_addr {
|
|
eval $start if $b_log;
|
|
my $program = check_program('ip');
|
|
my @data = grabber("$program addr 2>/dev/null",'\n','strip') if $program;
|
|
#my @data = reader("$ENV{'HOME'}/bin/scripts/inxi/data/if/scope-ipaddr-1.txt",'strip') or die $!;
|
|
my ($b_skip,$broadcast,$if,$ip,@ips,$scope,$if_id,$type,@temp,@temp2);
|
|
foreach (@data){
|
|
if (/^[0-9]/){
|
|
#print "$_\n";
|
|
if (@ips){
|
|
#print "$if\n";
|
|
@temp = ($if,[@ips]);
|
|
@ifs = (@ifs,@temp);
|
|
@ips = ();
|
|
}
|
|
@temp = split /:\s+/,$_;
|
|
$if = $temp[1];
|
|
if ($if eq 'lo'){
|
|
$b_skip = 1;
|
|
$if = '';
|
|
next;
|
|
}
|
|
$b_skip = 0;
|
|
@temp = ();
|
|
}
|
|
elsif (!$b_skip && /^inet/){
|
|
#print "$_\n";
|
|
@temp = split /\s+/, $_;
|
|
($broadcast,$ip,$scope,$if_id,$type) = ('','','','','');
|
|
$ip = $temp[1];
|
|
$type = ($temp[0] eq 'inet') ? 4 : 6 ;
|
|
if ($temp[2] eq 'brd'){
|
|
$broadcast = $temp[3];
|
|
}
|
|
if (/scope\s([^\s]+)(\s(.+))?/){
|
|
$scope = $1;
|
|
$if_id = $3;
|
|
}
|
|
@temp = ($type,$ip,$broadcast,$scope,$if_id);
|
|
@ips = (@ips,[@temp]);
|
|
#print Dumper \@ips;
|
|
}
|
|
}
|
|
#print Dumper \@ips if $test[4];
|
|
if (@ips){
|
|
@temp = ($if,[@ips]);
|
|
@ifs = (@ifs,@temp);
|
|
}
|
|
main::log_data('dump','@ifs',\@ifs) if $b_log;
|
|
print Dumper \@ifs if $test[3];
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_ifconfig {
|
|
eval $start if $b_log;
|
|
my $program = check_program('ifconfig'); # not in user path, sbin
|
|
my @data = grabber("$program 2>/dev/null",'\n','') if $program;
|
|
#my @data = reader("$ENV{'HOME'}/bin/scripts/inxi/data/if/vps-ifconfig-1.txt",'') or die $!;
|
|
my ($b_skip,$broadcast,$if,@ips_bsd,$ip,@ips,$scope,$if_id,$type,@temp,@temp2);
|
|
my ($state,$speed,$duplex,$mac);
|
|
foreach (@data){
|
|
if (/^[\S]/i){
|
|
#print "$_\n";
|
|
if (@ips){
|
|
#print "here\n";
|
|
@temp = ($if,[@ips]);
|
|
@ifs = (@ifs,@temp);
|
|
@ips = ();
|
|
}
|
|
if ($mac){
|
|
@temp = ($if,[($state,$speed,$duplex,$mac)]);
|
|
@ifs_bsd = (@ifs_bsd,@temp);
|
|
($state,$speed,$duplex,$mac,$if_id) = ('','','','','');
|
|
}
|
|
$if = (split /\s+/,$_)[0];
|
|
$if =~ s/:$//; # em0: flags=8843
|
|
$if_id = $if;
|
|
$if = (split /:/, $if)[0] if $if;
|
|
if ($if =~ /^lo/){
|
|
$b_skip = 1;
|
|
$if = '';
|
|
$if_id = '';
|
|
next;
|
|
}
|
|
$b_skip = 0;
|
|
}
|
|
# lladdr openbsd
|
|
elsif (!$b_skip && $bsd_type && /^\s+(ether|media|status|lladdr)/){
|
|
$_ =~ s/^\s+//;
|
|
# media: Ethernet 100baseTX <full-duplex> freebsd 7.3
|
|
# media: Ethernet autoselect (1000baseT <full-duplex>) Freebsd 8.2
|
|
#
|
|
if (/^media/){
|
|
# openbsd: media: Ethernet autoselect (1000baseT full-duplex)
|
|
if ($bsd_type && $bsd_type eq 'openbsd'){
|
|
$_ =~ /\s\([\S]+\s([\S]+)\)/;
|
|
$duplex = $1;
|
|
}
|
|
else {
|
|
$_ =~ /<([^>]+)>/;
|
|
$duplex = $1;
|
|
}
|
|
$_ =~ /\s\(([1-9][\S]+\s)/;
|
|
$speed = $1;
|
|
$speed =~ s/\s+$// if $speed;
|
|
}
|
|
elsif (!$mac && /^ether|lladdr/){
|
|
$mac = (split /\s+/, $_)[1];
|
|
}
|
|
elsif (/^status/){
|
|
$state = (split /\s+/, $_)[1];
|
|
}
|
|
}
|
|
elsif (!$b_skip && /^\s+inet/){
|
|
#print "$_\n";
|
|
$_ =~ s/^\s+//;
|
|
$_ =~ s/addr:\s/addr:/;
|
|
@temp = split /\s+/, $_;
|
|
($broadcast,$ip,$scope,$type) = ('','','','');
|
|
$ip = $temp[1];
|
|
# fe80::225:90ff:fe13:77ce%em0
|
|
# $ip =~ s/^addr:|%([\S]+)//;
|
|
if ($1 && $1 ne $if_id){
|
|
$if_id = $1;
|
|
}
|
|
$type = ($temp[0] eq 'inet') ? 4 : 6 ;
|
|
if (/(Bcast:|broadcast\s)([\S]+)/){
|
|
$broadcast = $2;
|
|
}
|
|
if (/(scopeid\s[^<]+<|Scope:|scopeid\s)([^>]+)[>]?/){
|
|
$scope = $2;
|
|
}
|
|
$scope = 'link' if $ip =~ /^fe80/;
|
|
@temp = ($type,$ip,$broadcast,$scope,$if_id);
|
|
@ips = (@ips,[@temp]);
|
|
#print Dumper \@ips;
|
|
}
|
|
}
|
|
if (@ips){
|
|
@temp = ($if,[@ips]);
|
|
@ifs = (@ifs,@temp);
|
|
}
|
|
if ($mac){
|
|
@temp = ($if,[($state,$speed,$duplex,$mac)]);
|
|
@ifs_bsd = (@ifs_bsd,@temp);
|
|
($state,$speed,$duplex,$mac) = ('','','','');
|
|
}
|
|
print Dumper \@ifs if $test[3];
|
|
print Dumper \@ifs_bsd if $test[3];
|
|
main::log_data('dump','@ifs',\@ifs) if $b_log;
|
|
main::log_data('dump','@ifs_bsd',\@ifs_bsd) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_pci_data {
|
|
eval $start if $b_log;
|
|
if ( $b_pci ){
|
|
if (!$bsd_type){
|
|
if ($alerts{'lspci'}{'action'} eq 'use' ){
|
|
set_lspci_data();
|
|
}
|
|
}
|
|
else {
|
|
#if (1 == 1){
|
|
if ($alerts{'pciconf'}{'action'} eq 'use'){
|
|
set_pciconf_data();
|
|
}
|
|
}
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# 0 type
|
|
# 1 type_id
|
|
# 2 bus_id
|
|
# 3 sub_id
|
|
# 4 device
|
|
# 5 vendor_id
|
|
# 6 chip_id
|
|
# 7 rev
|
|
# 8 port
|
|
# 9 driver
|
|
# 10 modules
|
|
# 11 driver_nu [bsd, like: em0 - driver em; nu 0. Used to match IF in -n
|
|
sub set_lspci_data {
|
|
eval $start if $b_log;
|
|
my ($busid,$busid_nu,$content,$port,$driver,$modules,$device,$vendor_id,$chip_id,$rev,
|
|
$type,$type_id,@pcis,@temp);
|
|
# my @pcis = grabber('lspci -nnv','\n','strip');
|
|
my $path = check_program('lspci');
|
|
$content = qx($path -nnv 2>/dev/null) if $path;
|
|
@pcis = split /\n/, $content if $content;
|
|
#my $file = "$ENV{HOME}/bin/scripts/inxi/data/lspci/racermach-1-knnv.txt";
|
|
#@pcis = reader($file);
|
|
#print scalar @pcis;
|
|
@pcis = map {$_ =~ s/^\s+//; $_} @pcis if @pcis;
|
|
foreach (@pcis){
|
|
#print "$_\n";
|
|
if ($device){
|
|
if ($_ =~ /^\s*$/) {
|
|
@temp = ($type,$type_id,$busid,$busid_nu,$device,$vendor_id,$chip_id,
|
|
$rev,$port,$driver,$modules);
|
|
@pci = (@pci,[@temp]);
|
|
$device = '';
|
|
#print "$busid $device_id r:$rev p: $port\n$type\n$device\n";
|
|
}
|
|
elsif ($_ =~ /^I\/O\sports/){
|
|
$port = (split /\s+/,$_)[3];
|
|
#print "p:$port\n";
|
|
}
|
|
elsif ($_ =~ /^Kernel\sdriver\sin\suse/){
|
|
$driver = (split /:\s*/,$_)[1];
|
|
}
|
|
elsif ($_ =~ /^Kernel\smodules/i){
|
|
$modules = (split /:\s*/,$_)[1];
|
|
}
|
|
|
|
}
|
|
elsif ($_ =~ /^([0-9a-f]{2}:[0-9a-f]{2})[.:]([0-9a-f]+)\s(.*)\s\[([0-9a-f]{4}):([0-9a-f]{4})\](\s\(rev\s([^\)]+)\))?/){
|
|
$busid = $1;
|
|
$busid_nu = hex($2);
|
|
my @working = split /:\s+/, $3;
|
|
$device = $working[1];
|
|
$type = $working[0];
|
|
$vendor_id = $4;
|
|
$chip_id = $5;
|
|
$rev = ($7)?$7 : '';
|
|
$device = cleaner($device);
|
|
$working[0] =~ /\[([^\]]+)\]$/;
|
|
$type_id = $1;
|
|
$type = lc($type);
|
|
$type = pci_cleaner($type,'pci');
|
|
$type =~ s/\s+$//;
|
|
$port = '';
|
|
$driver = '';
|
|
$modules = '';
|
|
}
|
|
}
|
|
if ($device && $busid){
|
|
@temp = ($type,$type_id,$busid,$busid_nu,$device,$vendor_id,$chip_id,$rev,$port,$driver,$modules);
|
|
@pci = (@pci,[@temp]);
|
|
$device = '';
|
|
}
|
|
print Dumper \@pci if $test[4];
|
|
main::log_data('dump','@pci',\@pci) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# em0@pci0:6:0:0: class=0x020000 card=0x10d315d9 chip=0x10d38086 rev=0x00 hdr=0x00
|
|
# vendor = 'Intel Corporation'
|
|
# device = 'Intel 82574L Gigabit Ethernet Controller (82574L)'
|
|
# class = network
|
|
# subclass = ethernet
|
|
sub set_pciconf_data {
|
|
eval $start if $b_log;
|
|
my ($busid,$busid_nu,$content,$port,$driver,$driver_nu,$modules,$device,$vendor,
|
|
$vendor_id,$chip_id,$rev,$type,$type_id,@data,@temp,@working);
|
|
# my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/pciconf/pci-freebsd-8.2-2";
|
|
# open my $fh, '<', $file or die "can't open $file: $!";
|
|
# chomp(@data = <$fh>);
|
|
my $path = check_program('pciconf');
|
|
$content = qx($path -lv 2>/dev/null) if $path;
|
|
@data = split /\n/, $content if $content;
|
|
foreach (@data){
|
|
if ($_ =~ /^[^@]+\@pci/){
|
|
push @working, '';
|
|
}
|
|
$_ =~ s/^\s+//;
|
|
push @working, $_;
|
|
}
|
|
foreach (@working){
|
|
if ($driver){
|
|
if ($_ =~ /^\s*$/) {
|
|
$vendor = cleaner($vendor);
|
|
$device = cleaner($device);
|
|
if ($vendor && $device){
|
|
if ($vendor !~ /$device/i){
|
|
$device = "$vendor $device";
|
|
}
|
|
}
|
|
elsif (!$device){
|
|
$device = $vendor;
|
|
}
|
|
@temp = ($type,$type_id,$busid,$busid_nu,$device,$vendor_id,$chip_id,
|
|
$rev,$port,$driver,$modules,$driver_nu);
|
|
@pci = (@pci,[@temp]);
|
|
$driver = '';
|
|
#print "$busid $device_id r:$rev p: $port\n$type\n$device\n";
|
|
}
|
|
elsif ($_ =~ /^vendor/){
|
|
$vendor = (split /\s+=\s+/,$_)[1];
|
|
#print "p:$port\n";
|
|
}
|
|
elsif ($_ =~ /^device/){
|
|
$device = (split /\s+=\s+/,$_)[1];
|
|
}
|
|
elsif ($_ =~ /^class/i){
|
|
$type = (split /\s+=\s+/,$_)[1];
|
|
}
|
|
|
|
}
|
|
elsif (/^([^@]+)\@pci([0-9]{1,3}:[0-9]{1,3}:[0-9]{1,3}):([0-9]{1,3}).*class=([^\s]+)\scard=([^\s]+)\schip=([^\s]+)\srev=([^\s]+)/){
|
|
$driver = $1;
|
|
$busid = $2;
|
|
$busid_nu = $3;
|
|
$type_id = $4;
|
|
#$vendor_id = $5;
|
|
$vendor_id = substr($6,6,4);
|
|
$chip_id = substr($6,2,4);
|
|
$rev = $7;
|
|
$vendor = '';
|
|
$device = '';
|
|
$type = '';
|
|
$driver =~ /(^[a-z]+)([0-9]+$)/;
|
|
$driver = $1;
|
|
$driver_nu = $2;
|
|
}
|
|
}
|
|
if ($driver && $busid){
|
|
$vendor = cleaner($vendor);
|
|
$device = cleaner($device);
|
|
$device = ( $vendor && $device !~ /$vendor/) ? "$vendor $device" : $device;
|
|
@temp = ($type,$type_id,$busid,$busid_nu,$device,$vendor_id,$chip_id,$rev,$port,$driver,$modules,$driver_nu);
|
|
@pci = (@pci,[@temp]);
|
|
$device = '';
|
|
}
|
|
print Dumper \@pci if $test[4];
|
|
main::log_data('dump','@pci',\@pci) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_ps_aux {
|
|
eval $start if $b_log;
|
|
@ps_aux = split "\n",qx(ps aux);;
|
|
shift @ps_aux; # get rid of header row
|
|
$_=lc for @ps_aux; # this is a super fast way to set to lower
|
|
# this is for testing for the presence of the command
|
|
@ps_cmd = map {
|
|
my @split = split /\s+/, $_;
|
|
# slice out 10th to last elements of ps aux rows
|
|
my $final = $#split;
|
|
# some stuff has a lot of data, chrome for example
|
|
$final = ($final > 12) ? 12 : $final;
|
|
@split = @split[10 .. $final ];
|
|
join " ", @split;
|
|
} @ps_aux;
|
|
print Dumper \@ps_aux if $test[5];
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_sysctl_data {
|
|
eval $start if $b_log;
|
|
return if $alerts{'sysctl'}{'action'} ne 'use';
|
|
my (@temp);
|
|
# darwin sysctl has BOTH = and : separators, and repeats data. Why?
|
|
if (!$b_fake_sysctl){
|
|
my $program = check_program('sysctl');
|
|
@temp = grabber("$program -a 2>/dev/null");
|
|
}
|
|
else {
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sysctl/obsd_6.1_sysctl_soekris6501_root.txt";
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sysctl/obsd_6.1sysctl_lenovot500_user.txt";
|
|
## matches: compaq: openbsd-dmesg.boot-1.txt
|
|
my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sysctl/openbsd-5.6-sysctl-1.txt";
|
|
## matches: toshiba: openbsd-5.6-dmesg.boot-1.txt
|
|
#my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/sysctl/openbsd-5.6-sysctl-2.txt";
|
|
@temp = reader($file);
|
|
}
|
|
foreach (@temp){
|
|
$_ =~ s/\s*=\s*|:\s+/:/;
|
|
$_ =~ s/\"//g;
|
|
push @sysctl, $_;
|
|
# we're building these here so we can use these arrays to test
|
|
# in each feature if we will try to build the feature for bsds
|
|
if (/^hw\.sensors/ && !/^hw\.sensors\.acpi(bat|cmb)/ && !/^hw.sensors.softraid/){
|
|
push @sysctl_sensors, $_;
|
|
}
|
|
elsif (/^hw\.(vendor|product|version|serialno|uuid)/){
|
|
push @sysctl_machine, $_;
|
|
}
|
|
elsif (/^hw\.sensors\.acpi(bat|cmb)/){
|
|
push @sysctl_battery, $_;
|
|
}
|
|
}
|
|
print Dumper \@sysctl if $test[7];
|
|
# this thing can get really long.
|
|
if ($b_log){
|
|
#main::log_data('dump','@sysctl',\@sysctl);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# http://www.usb.org/developers/defined_class
|
|
sub set_usb_data {
|
|
eval $start if $b_log;
|
|
if ($alerts{'lsusb'}{'action'} eq 'use' ){
|
|
#$usb_level = 2;
|
|
# NOTE: we can't get reliable usb network device with short
|
|
if ($usb_level == 2){
|
|
set_lsusb_data_long();
|
|
}
|
|
else {
|
|
set_lsusb_data_short();
|
|
}
|
|
}
|
|
elsif ( $alerts{'usbdevs'}{'action'} eq 'use'){
|
|
set_usbdevs_data();
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_lsusb_data_short {
|
|
eval $start if $b_log;
|
|
my ($content,@data);
|
|
my $b_live = 1;
|
|
if ($b_live){
|
|
my $path = check_program('lsusb');
|
|
$content = qx($path 2>/dev/null) if $path;
|
|
@data = split /\n/, $content if $content;
|
|
}
|
|
else {
|
|
open my $fh, '<', "$ENV{'HOME'}/bin/scripts/inxi/data/lsusb/mdmarmer-lsusb.txt" or die $!;
|
|
chomp(@data = <$fh>);
|
|
}
|
|
foreach (@data){
|
|
next if /^\s*$|^Couldn't/; # expensive second call: || /UNAVAIL/
|
|
my @working = split /\s+/, $_;
|
|
$working[3] =~ s/:$//;
|
|
my $id = int($working[3]);
|
|
if ($id > 1){
|
|
my $bus = int($working[1]);
|
|
my $chip = $working[5];
|
|
my @temp = @working[6..$#working];
|
|
my $name = join ' ', @temp;
|
|
if ($name !~ /hub/i){
|
|
@usb = (@usb,[$bus,$id,$chip,$name]);
|
|
}
|
|
}
|
|
}
|
|
print Dumper \@usb if $test[6];
|
|
main::log_data('dump','@usb: short',\@usb) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub set_lsusb_data_long {
|
|
eval $start if $b_log;
|
|
my ($content,@data,@working,$bus_id,$device_id,$id,$b_skip);
|
|
my $j = 0;
|
|
my $b_live = 1;
|
|
if ($b_live){
|
|
my $path = check_program('lsusb');
|
|
$content = qx($path -v 2>/dev/null) if $path;
|
|
@data = split /\n/, $content if $content;
|
|
}
|
|
else {
|
|
my $file;
|
|
#$file = "$ENV{'HOME'}/bin/scripts/inxi/data/lsusb/mdmarmer-lsusb-v.txt";
|
|
$file = "$ENV{'HOME'}/bin/scripts/inxi/data/lsusb/lsusb-v-dz64.txt";
|
|
open my $fh, '<', $file or die $!;
|
|
chomp(@data = <$fh>);
|
|
}
|
|
foreach (@data){
|
|
# we won't need all the lsusb data, so set it to skip
|
|
# after the last item we might want
|
|
# Couldn't open device, some information will be missing
|
|
next if /^\s*$|^Couldn't/; # expensive second call: || /UNAVAIL/
|
|
if (!$b_skip && $bus_id && /^\s\s/){
|
|
#if ($_ =~ /\bDescriptor\b:/){
|
|
if ($_ =~ /^\s+([\S]+)\sDescriptor:/){
|
|
#$_ =~ /^\s+([\S]+)\sDescriptor:/;
|
|
$_ = "Descriptor_$1";
|
|
}
|
|
else {
|
|
$_ =~ s/^\s\s|[\s]+$//g;
|
|
$_ =~ s/^[\s]+/~/g;
|
|
#$_ =~ s/[\s]+$//g;
|
|
$_ =~ s/\sType/_Type/g;
|
|
$_ =~ s/^([\S]+)[\s]+(.*)//;
|
|
my $one = ($1) ? $1: '';
|
|
my $two = ($2) ? $2: '';
|
|
$_ = "$one:$two";
|
|
$b_skip = 1 if $one eq '~bInterfaceProtocol';
|
|
#$_ = cleaner($_);
|
|
if (/([\S]+):([0-9]+|0x[0-9a-f]+)\s(.*)/){
|
|
$_ = "$1:$2:$3";
|
|
#$b_skip = 1 if $1 eq '~bInterfaceProtocol';
|
|
}
|
|
#print "$1\n";
|
|
}
|
|
push @working, $_;
|
|
}
|
|
elsif (/^Bus\s([0-9]+)\sDevice\s([0-9]+):\sID\s(([0-9a-f]{4}):([0-9a-f]{4})).*/){
|
|
#elsif (/^Bus\s/){
|
|
#if (/^Bus\s([0-9]+)\sDevice\s([0-9]+):\sID\s(([0-9a-f]{4}):([0-9a-f]{4})).*/){
|
|
$j = scalar @usb;
|
|
$bus_id = int($1);
|
|
$device_id = int($2);
|
|
$id = $3;
|
|
$b_skip = 0;
|
|
# we don't need 32, system boot, or 127, end of table
|
|
if (@working){
|
|
if ($working[0] != 32 && $working[0] != 127){
|
|
$usb[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
}
|
|
@working = ($bus_id,$device_id,$id);
|
|
#}
|
|
}
|
|
}
|
|
if (@working){
|
|
$j = scalar @usb;
|
|
$usb[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
# last by not least, sort it by dmi type, now we don't have to worry
|
|
# about random dmi type ordering in the data, which happens
|
|
@usb = sort { $a->[0] <=> $b->[0] || $a->[1] <=> $b->[1] } @usb;
|
|
print Dumper \@usb if $test[6];
|
|
main::log_data('dump','@usb: long',\@usb) if $b_log;
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
# Controller /dev/usb2:
|
|
# addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
|
|
# port 1 addr 2: full speed, power 98 mA, config 1, USB Receiver(0xc52b), Logitech(0x046d), rev 12.01
|
|
# port 2 powered
|
|
sub set_usbdevs_data {
|
|
eval $start if $b_log;
|
|
my (@data,@working,$class,$bus_id,$addr_id,$id,$speed,$protocol);
|
|
my $j = 0;
|
|
my $ports = 0;
|
|
if (!$b_fake_usbdevs){
|
|
my $program = check_program('usbdevs');
|
|
my $content = qx($program -v 2>/dev/null);
|
|
@data = split /\n/, $content;
|
|
}
|
|
else {
|
|
open my $fh, '<', "$ENV{'HOME'}/bin/scripts/inxi/data/lsusb/bsd-usbdevs-v-1.txt" or die $!;
|
|
chomp(@data = <$fh>);
|
|
}
|
|
foreach (@data){
|
|
if (/^Controller\s\/dev\/usb([0-9]+)/){
|
|
$j = scalar @usb;
|
|
$ports = 0;
|
|
$bus_id = $1;
|
|
@working = ();
|
|
}
|
|
elsif (/^addr\s([0-9]+):\s([^,]+),[^,]+,[^,]+,\s?([^,]+)\(0x([0-9a-f]{4})\),\s?([^,]+)\s?\(0x([0-9a-f]{4})\)/){
|
|
$j = scalar @usb;
|
|
$addr_id = $1;
|
|
$speed = "bcdUSB:$2";
|
|
$id = "$4:$6";
|
|
$protocol="~bInterfaceProtocol:0:$5 $3";
|
|
#print "p1:$protocol\n";
|
|
$class='bDeviceClass:9:Hub';
|
|
@working = ($bus_id,$addr_id,$id,$speed,$class,$protocol);
|
|
if (@working){
|
|
$usb[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
@working = ();
|
|
}
|
|
elsif (/^\s+port\s([0-9]+)\saddr\s([0-9]+):\s([^,]+),[^,]+,[^,]+,\s?([^,]+)\(0x([0-9a-f]{4})\),\s?([^,]+)\s?\(0x([0-9a-f]{4})\)/){
|
|
$j = scalar @usb;
|
|
$addr_id = "$2";
|
|
$speed = "bcdUSB:$3";
|
|
$id = "$5:$7";
|
|
$protocol="~bInterfaceProtocol:0:$6 $4";
|
|
#print "p2:$protocol\n";
|
|
$ports++;
|
|
@working = ($bus_id,$addr_id,$id,$speed,$protocol);
|
|
if (@working){
|
|
$usb[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
@working = ();
|
|
}
|
|
elsif (/^\s+port\s([0-9]+)\spowered/){
|
|
$ports++;
|
|
}
|
|
}
|
|
if (@working){
|
|
$j = scalar @usb;
|
|
$usb[$j] = (
|
|
[@working],
|
|
);
|
|
}
|
|
main::log_data('dump','@usb: usbdevs',\@usb) if $b_log;
|
|
print Dumper \@usb if $test[6];
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
########################################################################
|
|
#### GENERATE LINES
|
|
########################################################################
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### LINE CONTROLLERS
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub assign_data {
|
|
my (%row) = @_;
|
|
return if ! %row;
|
|
if ($output_type eq 'screen'){
|
|
print_data(%row);
|
|
}
|
|
else {
|
|
%rows = (%rows,%row);
|
|
}
|
|
}
|
|
|
|
sub generate_lines {
|
|
eval $start if $b_log;
|
|
my (%row,$b_pci_check,$b_dmi_check);
|
|
set_ps_aux() if ! @ps_aux;
|
|
set_sysctl_data() if $b_sysctl;
|
|
# note: ps aux loads before logging starts, so create debugger data here
|
|
if ($b_log){
|
|
# I don't think we need to see this, it's long, but leave in case we do
|
|
#main::log_data('dump','@ps_aux',\@ps_aux);
|
|
main::log_data('dump','@ps_cmd',\@ps_cmd);
|
|
}
|
|
if ( $show{'short'} ){
|
|
set_dmesg_boot_data() if ($bsd_type && !$b_dmesg_boot_check);
|
|
%row = generate_short_data();
|
|
assign_data(%row);
|
|
}
|
|
else {
|
|
if ( $show{'system'} ){
|
|
%row = generate_system_data();
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'machine'} ){
|
|
if ($b_dmi && !$b_dmi_check ){
|
|
set_dmi_data() ;
|
|
$b_dmi_check = 1;
|
|
}
|
|
set_dmesg_boot_data() if ($bsd_type && !$b_dmesg_boot_check);
|
|
%row = line_handler('Machine','machine');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'battery'} ){
|
|
set_dmi_data() if $b_dmi && !$b_dmi_check;
|
|
$b_dmi_check = 1;
|
|
%row = line_handler('Battery','battery');
|
|
if (%row || $show{'battery-forced'}){
|
|
assign_data(%row);
|
|
}
|
|
}
|
|
if ( $show{'ram'} ){
|
|
set_dmi_data() if $b_dmi && !$b_dmi_check;
|
|
$b_dmi_check = 1;
|
|
%row = line_handler('Memory','ram');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'slot'} ){
|
|
set_dmi_data() if $b_dmi && !$b_dmi_check;
|
|
$b_dmi_check = 1;
|
|
%row = line_handler('PCI Slots','slot');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'cpu'} || $show{'cpu-basic'} ){
|
|
set_dmesg_boot_data() if ($bsd_type && !$b_dmesg_boot_check);
|
|
my $arg = ($show{'cpu-basic'}) ? 'basic' : 'full' ;
|
|
%row = line_handler('CPU','cpu',$arg);
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'graphic'} ){
|
|
set_pci_data() if !$b_pci_check;
|
|
$b_pci_check = 1;
|
|
%row = line_handler('Graphics','graphic');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'audio'} ){
|
|
set_pci_data() if !$b_pci_check;
|
|
$b_pci_check = 1;
|
|
%row = line_handler('Audio','audio');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'network'} ){
|
|
set_usb_data() if !$b_usb_check;
|
|
set_pci_data() if !$b_pci_check;
|
|
set_ip_data() if ($show{'ip'} || ($bsd_type && $show{'network-advanced'}));
|
|
$b_pci_check = 1;
|
|
$b_usb_check = 1;
|
|
%row = line_handler('Network','network');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'disk'} || $show{'disk-basic'} || $show{'disk-total'} || $show{'optical'} ){
|
|
set_dmesg_boot_data() if ($bsd_type && !$b_dmesg_boot_check);
|
|
%row = line_handler('Drives','disk');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'raid'} ){
|
|
%row = line_handler('RAID','raid');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'partition'} || $show{'partition-full'}){
|
|
%row = line_handler('Partition','partition');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'unmounted'} ){
|
|
%row = line_handler('Unmounted','unmounted');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'usb'} ){
|
|
set_usb_data() if !$b_usb_check;
|
|
%row = line_handler('USB','usb');
|
|
assign_data(%row);
|
|
$b_usb_check = 1;
|
|
}
|
|
if ( $show{'sensor'} ){
|
|
%row = line_handler('Sensors','sensor');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'repo'} ){
|
|
%row = line_handler('Repos','repo');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'process'} ){
|
|
%row = line_handler('Processes','process');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'weather'} ){
|
|
%row = line_handler('Weather','weather');
|
|
assign_data(%row);
|
|
}
|
|
if ( $show{'info'} ){
|
|
%row = generate_info_data();
|
|
assign_data(%row);
|
|
}
|
|
}
|
|
if ( $output_type ne 'screen' ){
|
|
output_handler(%rows);
|
|
}
|
|
eval $end if $b_log;
|
|
}
|
|
|
|
sub line_handler {
|
|
eval $start if $b_log;
|
|
my ($key,$sub,$arg) = @_;
|
|
my %subs = (
|
|
'audio' => \&AudioData::get,
|
|
'battery' => \&BatteryData::get,
|
|
'cpu' => \&CpuData::get,
|
|
'disk' => \&DiskData::get,
|
|
'graphic' => \&GraphicData::get,
|
|
'machine' => \&MachineData::get,
|
|
'network' => \&NetworkData::get,
|
|
'partition' => \&PartitionData::get,
|
|
'raid' => \&RaidData::get,
|
|
'ram' => \&RamData::get,
|
|
'repo' => \&RepoData::get,
|
|
'process' => \&ProcessData::get,
|
|
'sensor' => \&SensorData::get,
|
|
'slot' => \&SlotData::get,
|
|
'unmounted' => \&UnmountedData::get,
|
|
'usb' => \&UsbData::get,
|
|
'weather' => \&WeatherData::get,
|
|
);
|
|
my (%data);
|
|
my $data_name = main::key($prefix++,$key);
|
|
my @rows = $subs{$sub}->($arg);
|
|
if (@rows){
|
|
%data = ($data_name => \@rows,);
|
|
}
|
|
eval $end if $b_log;
|
|
return %data;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### SHORT, DEBUG
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub generate_short_data {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my $kernel_os = ($bsd_type) ? 'OS' : 'Kernel';
|
|
my $client = $client{'name-print'};
|
|
my $client_shell = ($b_irc) ? 'Client' : 'Shell';
|
|
if ($client{'version'}){
|
|
$client .= ' ' . $client{'version'};
|
|
}
|
|
my ($cpu_string,$speed,$speed_key,$type) = ('','','speed','');
|
|
my $memory = get_memory_data('string');
|
|
my @cpu = CpuData::get('short');
|
|
if (scalar @cpu > 1){
|
|
$type = ($cpu[2]) ? " (-$cpu[2]-)" : '';
|
|
($speed,$speed_key) = ('','');
|
|
if ($cpu[6]){
|
|
$speed_key = "$cpu[3]/$cpu[5]";
|
|
$cpu[4] =~ s/ MHz//;
|
|
$speed = "$cpu[4]/$cpu[6]";
|
|
}
|
|
else {
|
|
$speed_key = $cpu[3];
|
|
$speed = $cpu[4];
|
|
}
|
|
$cpu[1] ||= row_defaults('cpu-model-null');
|
|
$cpu_string = $cpu[0] . ' ' . $cpu[1] . $type;
|
|
}
|
|
elsif ($bsd_type) {
|
|
if ($alerts{'sysctl'}{'action'}){
|
|
if ($alerts{'sysctl'}{'action'} ne 'use'){
|
|
$cpu_string = "sysctl $alerts{'sysctl'}{'action'}";
|
|
$speed = "sysctl $alerts{'sysctl'}{'action'}";
|
|
}
|
|
else {
|
|
$cpu_string = 'bsd support coming';
|
|
$speed = 'bsd support coming';
|
|
}
|
|
}
|
|
}
|
|
my @disk = DiskData::get('short');
|
|
# print Dumper \@disk;
|
|
my $disk_string = 'N/A';
|
|
my ($size,$used,$size_type,$used_type) = ('','','','');
|
|
my (@temp,$size_holder,$used_holder);
|
|
if (@disk){
|
|
$size = $disk[0]{'size'};
|
|
if ($disk[0]{'size'} && $disk[0]{'size'} =~ /^[0-9\.]+$/){
|
|
$size_holder = $disk[0]{'size'};
|
|
@temp = get_size($size);
|
|
$size = $temp[0];
|
|
$size_type = " $temp[1]";
|
|
}
|
|
$used = $disk[0]{'used'};
|
|
if (defined $disk[0]{'used'} && $disk[0]{'used'} =~ /^[0-9\.]+$/){
|
|
$used_holder = $disk[0]{'used'};
|
|
@temp = get_size($used);
|
|
$used = $temp[0];
|
|
$used_type = " $temp[1]";
|
|
}
|
|
# in some fringe cases size can be 0 so only assign 'N/A' if no percents etc
|
|
if ($size_holder && $used_holder){
|
|
my $percent = ' (' . sprintf("%.1f", $used_holder/$size_holder*100) . '% used)';
|
|
$disk_string = "$size$size_type$percent";
|
|
}
|
|
else {
|
|
$size ||= row_defaults('disk-size-0');
|
|
$disk_string = "$used$used_type/$size$size_type";
|
|
}
|
|
}
|
|
#print join '; ', @cpu, " sleep: $cpu_sleep\n";
|
|
$memory ||= 'N/A';
|
|
my @data = ({
|
|
main::key($num++,'CPU') => $cpu_string,
|
|
main::key($num++,$speed_key) => $speed,
|
|
main::key($num++,$kernel_os) => &get_kernel_data(),
|
|
main::key($num++,'Up') => &get_uptime(),
|
|
main::key($num++,'Mem') => $memory,
|
|
main::key($num++,'HDD') => $disk_string,
|
|
# could make -1 for ps aux itself, -2 for ps aux and self
|
|
main::key($num++,'Procs') => scalar @ps_aux,
|
|
main::key($num++,$client_shell) => $client,
|
|
main::key($num++,$self_name) => &get_self_version(),
|
|
},);
|
|
my %row = (
|
|
main::key($prefix,'SHORT') => [(@data),],
|
|
);
|
|
eval $end if $b_log;
|
|
return %row;
|
|
}
|
|
|
|
#### -------------------------------------------------------------------
|
|
#### CONSTRUCTED LINES
|
|
#### -------------------------------------------------------------------
|
|
|
|
sub generate_info_data {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my $gcc_alt = '';
|
|
my $running_in = '';
|
|
my $data_name = main::key($prefix++,'Info');
|
|
my ($b_gcc,%row,$gcc,$index,$ref);
|
|
my ($parent,$percent,$total,$used) = ('','','','');
|
|
my $client_shell = ($b_irc) ? 'Client' : 'Shell';
|
|
my $client = $client{'name-print'};
|
|
my @gccs = get_gcc_data();
|
|
if (@gccs){
|
|
$gcc = shift @gccs;
|
|
if ($extra > 1 && @gccs){
|
|
$gcc_alt = join '/', @gccs;
|
|
}
|
|
$b_gcc = 1;
|
|
}
|
|
$gcc ||= 'N/A';
|
|
if (!$b_irc && $extra > 1 ){
|
|
# bsds don't support -f option to get PPID
|
|
if (($b_display && !$b_force_display) && !$bsd_type){
|
|
$parent = get_shell_source();
|
|
}
|
|
else {
|
|
$parent = get_tty_number();
|
|
$parent = "tty $parent" if $parent ne '';
|
|
}
|
|
if ($parent eq 'login'){
|
|
$client{'su-start'} = $parent if !$client{'su-start'};
|
|
$parent = undef;
|
|
}
|
|
# can be tty 0 so test for defined
|
|
$running_in = $parent if defined $parent;
|
|
if ($extra > 2 && $running_in && get_ssh_status() ){
|
|
$running_in .= ' (SSH)';
|
|
}
|
|
}
|
|
my $memory = get_memory_data('splits');
|
|
if ($memory){
|
|
my @temp = split /:/, $memory;
|
|
my @temp2 = get_size($temp[0]);
|
|
$total = ($temp2[1]) ? $temp2[0] . ' ' . $temp2[1] : $temp2[0];
|
|
@temp2 = get_size($temp[1]);
|
|
$used = ($temp2[1]) ? $temp2[0] . ' ' . $temp2[1] : $temp2[0];
|
|
$used .= " ($temp[2]%)" if $temp[2];
|
|
}
|
|
$memory ||= 'N/A';
|
|
my %data = (
|
|
$data_name => [{
|
|
main::key($num++,'Processes') => scalar @ps_aux,
|
|
main::key($num++,'Uptime') => &get_uptime(),
|
|
main::key($num++,'Memory') => $total,
|
|
main::key($num++,'used') => $used,
|
|
},],
|
|
);
|
|
$index = scalar(@{ $data{$data_name} } ) - 1;
|
|
if ( (!$b_display || $b_force_display) || $extra > 0 ){
|
|
my %init = get_init_data();
|
|
my $init_type = ($init{'init-type'}) ? $init{'init-type'}: 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,'Init')} = $init_type;
|
|
if ($extra > 1 ){
|
|
my $init_version = ($init{'init-version'}) ? $init{'init-version'}: 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,'v')} = $init_version;
|
|
}
|
|
if ($init{'rc-type'}){
|
|
$data{$data_name}[$index]{main::key($num++,'rc')} = $init{'rc-type'};
|
|
if ($init{'rc-version'}){
|
|
$data{$data_name}[$index]{main::key($num++,'v')} = $init{'rc-version'};
|
|
}
|
|
}
|
|
if ($init{'runlevel'}){
|
|
$data{$data_name}[$index]{main::key($num++,'runlevel')} = $init{'runlevel'};
|
|
}
|
|
if ($extra > 1 ){
|
|
if ($init{'default'}){
|
|
my $default = ($init{'init-type'} eq 'systemd' && $init{'default'} =~ /[^0-9]$/ ) ? 'target' : 'default';
|
|
$data{$data_name}[$index]{main::key($num++,$default)} = $init{'default'};
|
|
}
|
|
}
|
|
}
|
|
if ($extra > 0 ){
|
|
my $b_clang;
|
|
my $clang_version = '';
|
|
if (my $path = check_program('clang')){
|
|
$clang_version = program_version($path,'clang',3,'--version');
|
|
$clang_version ||= 'N/A';
|
|
$b_clang = 1;
|
|
}
|
|
my $compiler = ($b_gcc || $b_clang) ? '': 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,'Compilers')} = $compiler;
|
|
if ($b_gcc){
|
|
$data{$data_name}[$index]{main::key($num++,'gcc')} = $gcc;
|
|
if ( $extra > 1 && $gcc_alt){
|
|
$data{$data_name}[$index]{main::key($num++,'alt')} = $gcc_alt;
|
|
}
|
|
}
|
|
if ($b_clang){
|
|
$data{$data_name}[$index]{main::key($num++,'clang')} = $clang_version;
|
|
}
|
|
}
|
|
if ($extra > 2 && $client{'su-start'}){
|
|
$client .= " ($client{'su-start'})";
|
|
}
|
|
$data{$data_name}[$index]{main::key($num++,$client_shell)} = $client;
|
|
if ($extra > 0 && $client{'version'}){
|
|
$data{$data_name}[$index]{main::key($num++,'v')} = $client{'version'};
|
|
}
|
|
if ( $running_in ){
|
|
$data{$data_name}[$index]{main::key($num++,'running in')} = $running_in;
|
|
}
|
|
$data{$data_name}[$index]{main::key($num++,$self_name)} = &get_self_version();
|
|
|
|
eval $end if $b_log;
|
|
return %data;
|
|
}
|
|
|
|
sub generate_system_data {
|
|
eval $start if $b_log;
|
|
my $num = 0;
|
|
my (%row,$ref,$index,$val1);
|
|
my $data_name = main::key($prefix++,'System');
|
|
my ($desktop,$desktop_info,$desktop_key,$toolkit,$wm) = ('','','Desktop','','');
|
|
my (@desktop_data,$desktop_version);
|
|
|
|
my %data = (
|
|
$data_name => [{}],
|
|
);
|
|
$index = scalar(@{ $data{$data_name} } ) - 1;
|
|
if ($show{'host'}){
|
|
$data{$data_name}[$index]{main::key($num++,'Host')} = &get_hostname();
|
|
}
|
|
$data{$data_name}[$index]{main::key($num++,'Kernel')} = &get_kernel_data();
|
|
$data{$data_name}[$index]{main::key($num++,'bits')} = &get_kernel_bits;
|
|
if ($extra > 0){
|
|
my @compiler = get_compiler_version(); # get compiler data
|
|
if (scalar @compiler != 2){
|
|
@compiler = ('N/A', '');
|
|
}
|
|
$data{$data_name}[$index]{main::key($num++,'compiler')} = $compiler[0];
|
|
# if no compiler, obviously no version, so don't waste space showing.
|
|
if ($compiler[0] ne 'N/A'){
|
|
$compiler[1] ||= 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,'v')} = $compiler[1];
|
|
}
|
|
}
|
|
# note: tty can have the value of 0 but the two tools
|
|
# return '' if undefined, so we test for explicit ''
|
|
if ($b_display){
|
|
my @desktop_data = DesktopEnvironment::get();
|
|
$desktop = $desktop_data[0] if $desktop_data[0];
|
|
$desktop_version = $desktop_data[1] if $desktop_data[1];
|
|
$desktop .= ' ' . $desktop_version if $desktop_version;
|
|
if ($extra > 0 && $desktop_data[3]){
|
|
#$desktop .= ' (' . $desktop_data[2];
|
|
#$desktop .= ( $desktop_data[3] ) ? ' ' . $desktop_data[3] . ')' : ')';
|
|
$toolkit = "$desktop_data[2] $desktop_data[3]";
|
|
}
|
|
if ($extra > 2 && $desktop_data[4]){
|
|
$desktop_info = $desktop_data[4];
|
|
}
|
|
# don't print the desktop if it's a wm and the same
|
|
if ($desktop_data[5] && (!$desktop_data[0] || index(lc($desktop_data[5]),lc($desktop_data[0])) == -1 )){
|
|
$wm = $desktop_data[5];
|
|
}
|
|
}
|
|
if (!$b_display || ( ! $desktop && $b_root)) {
|
|
my $tty = get_tty_number();
|
|
if (!$desktop){
|
|
$desktop_info = '';
|
|
}
|
|
# it is defined, as ''
|
|
if ( $tty eq '' && $client{'console-irc'}){
|
|
$tty = get_tty_console_irc();
|
|
}
|
|
$desktop = "tty $tty" if $tty ne '';
|
|
$desktop_key = 'Console';
|
|
}
|
|
$desktop ||= 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,$desktop_key)} = $desktop;
|
|
if ($toolkit){
|
|
$data{$data_name}[$index]{main::key($num++,'tk')} = $toolkit;
|
|
}
|
|
if ($extra > 2){
|
|
if ($desktop_info){
|
|
$data{$data_name}[$index]{main::key($num++,'info')} = $desktop_info;
|
|
}
|
|
if ($wm){
|
|
$data{$data_name}[$index]{main::key($num++,'wm')} = $wm;
|
|
}
|
|
}
|
|
if ($extra > 1){
|
|
my $dms = get_display_manager();
|
|
$dms ||= 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,'dm')} = $dms;
|
|
}
|
|
my $distro_key = ($bsd_type) ? 'OS': 'Distro' ;
|
|
my $distro = DistroData::get();
|
|
$distro ||= 'N/A';
|
|
$data{$data_name}[$index]{main::key($num++,$distro_key)} = $distro;
|
|
|
|
eval $end if $b_log;
|
|
return %data;
|
|
}
|
|
|
|
#######################################################################
|
|
#### LAUNCH
|
|
########################################################################
|
|
|
|
main(); ## From the End comes the Beginning
|
|
|
|
## note: this EOF is needed for smxi handling, this is what triggers the full download ok
|
|
###**EOF**###
|