README for inxi - a command line system information tool

NOTE: Maintainer alert: Perl inxi 2.9.01 is looking good for maybe early 
week of 2018-03-19 release. I'm putting the last issue requests on 
the last forums, so assuming no real further bugs found, expect Perl
inxi 2.9.01 to hit around Monday or Tuesday. If bugs found, of course,
those will be fixed before release.

=====================================================================
BASIC GIT BRANCH:
If you do not want to get the full master branch with gz history data, 
which gets bigger every year, you can clone inxi current using the: 
master-plain branch. 

git clone https://github.com/smxi/inxi --branch master-plain --single-branch

The master-plain branch does not have inxi.1.gz or inxi.tar.gz, and 
so does not suffer from the size inflation that master has. 
=====================================================================
LEGACY BRANCH:
If you'd like to look at or check out the Gawk/Bash version of inxi, 
you can find it here, at the inxi-legacy branch:

git clone https://github.com/smxi/inxi --branch inxi-legacy --single-branch

This version will not be maintained, and it's unlikely that I will 
spend any time on it in the future, but it is there in case it's of
use or interest to anyone.

=====================================================================
SUPPORT INFO:

Do not ask for basic help that reading the inxi -h / --help menus, or 
man page would show you, and do not ask for features to be added that
inxi already has. Also do not ask for support if your distro refuses to
update its inxi version, some are terrible about that.

DOCUMENTATION: http://smxi.org/docs/inxi.htm 
(smxi.org/docs/ is easier to remember, and is one click away from inxi.htm)
The one page wiki on github is only a pointer to the real resources.

HTML MAN PAGE: http://smxi.org/docs/inxi-man.htm 
INXI OPTIONS: http://smxi.org/docs/inxi-options.htm 
NOTE: These may not always be up to date.

ISSUES: https://github.com/smxi/inxi/issues
No issues accepted for non current inxi releases. See below for more on that.

SUPPORT FORUMS: http://techpatterns.com/forums/forum-33.html
This is the best place to place support issues that may be complicated.

If you are developer, use:
DEVELOPER FORUMS: http://techpatterns.com/forums/forum-32.html

SOURCE VERSION CONTROL: https://github.com/smxi/inxi
MAIN BRANCH: master
DEVELOPMENT BRANCHES: inxi-perl, one, two, three, android.
Dev branches are rarely used, but that's where the really hard new features etc
are debugged and worked out. inxi itself has the built in feature to be able
to update itself from anywhere, including these branches, which is very useful
for development and debugging on many user systems.

PULL REQUESTS: Please talk to me before starting to work on any patch, unless
it's a trivial bug fix. Please: NEVER even think about looking at or using previous 
inxi commits, previous to the current one, as a base for a patch. If you do, 
your patch / pull request will be rejected.

inxi has one and only one release, and that is the current one (plus dev releases,
of course, but those should never be packaged). All previous releases are 
immediately obsolete on the commit of every new release. There is no exception to 
this, and never will be.

Man page updates, doc page updates, etc, of course, are easy and will probably
be accepted, as long as they are done according to the requirements. 

Read below re asking about tagging this rolling software release, short version:
don't ask.

inxi releases early, and releases often, when under development. 

=====================================================================
ABOUT INXI - CORE COMMITMENT TO LONG TERM STABILITY

inxi is a command line system information tool. It was forked from the ancient
and mindbendingly perverse yet ingenius infobash, by locsmif. 

That was a buggy, impossible to update or maintain piece of software, so the
fork fixed those core issues, and made it flexible enough to expand the 
utility of the original ideas. Locmsif has given his thumbs up to inxi, so 
don't be fooled by legacy infobash stuff you may see out there.

inxi is lower case, except when I create a text header here in a file like 
this, but it's always lower case. Sometimes to follow convention I will use
upper case inxi to start a sentence, but i find it a bad idea since 
invariably, someone will repeat that and type it in as the command name, then
someone will copy that, and complain that the command: Inxi doesn't exist...

The primary purpose of inxi is for support, and sys admin use. inxi is used
widely for forum and IRC support, which is I believe it's most common function.

If you are piping output to paste or post, then make sure to turn off the
script colors with the -c 0 flag. Script colors in shell are characters.

inxi should always show you your current system state, as far as possible, 
and should be more reliable than your own beliefs about what is in your system, 
ideally. In other words, the goal in inxi is to have it be right more than it 
is wrong about any system that it runs on. And not to rely on non current system
state data if at all possible. Some things, like memory/ram data, rely on
radically unreliable system self reporting based on OEM filling out data
correctly, which doesn't often happen, so in those cases, you want to 
confirm things like ram capacity with a reputable hardware source, like
crucial.com, which has the best ram hardware tool I know of.

The core mission of inxi is to always work on all systems all the time. 
Well, all linux systems with the core tools inxi requires to operate
installed. Ie, not android, yet. What this means is this: you can have a 10 
year old box, or probably 15, not sure, and you can install today's inxi on 
it, and it will run. It won't run fast, but it will run. I test inxi on a 
200 MHz  laptop from about 1998 to keep it honest. That's also what was 
used to optimize the code at some points, since differences appear as seconds,
not 10ths or 100ths of seconds.

inxi is being written, and tested, on Perl as old as 5.08, and will work on
any system that runs Perl 5.08 or later. Pre 3.0.0 Gawk/Bash inxi will also run 
on any system no matter how old, within reason, so there should be no difference.

=====================================================================
BSD SUPPORT

BSD support is not as complete as GNU/Linux support due to the fact some of
the data simply is not available, or is structured in a way that makes it 
unique to each BSD. This fragmentation makes supporting BSDs far more difficult
than it should be in the 21st century. The BSD support in inxi is an ongoing
process, with more features being added as new data sources and types are 
discovered.

I will always accept patches that are well done, if they do not break GNU/Linux, 
and extend BSD support, or add new BSD features. inxi sets initial internal 
flags to identify that it is a BSD system vs a GNU/Linux system, after that 
it tests for specific applications and resources.

inxi will also start on Darwin, OSX's mutated version of a BSD, but my 
conclusion about Darwin is that it is Unix in name only, and I will not spend 
a second of my time adding any further support for that crippled broken 
corporate pseudo-unix system. Don't ask, unless you are willing to pay my
normal professional wages to get that support made.

=====================================================================
INXI FEATURES AND FUNCTIONALITY

inxi's functionality continues to grow over time, but it's also important
to understand that each core new feature usually requires about 30 days work
to get it stable. So new features are not trivial things, nor is it acceptable
to submit a patch that works only on your personal system. One inxi feature
(-s, sensors data), took about 2 hours to get working in the alpha test on the
local dev system, but then to handle the massive chaos that is actual user
sensors output and system variations, it took several rewrites and about 30
days to get somewhat reliable for about 98% or so of inxi users. So if your
patch is rejected, it's likely because you have not thought it through 
adequately, have not done adequate testing cross system and platform, etc.

=====================================================================
INXI RELEASE/SUPPORT/ISSUES/BUGS INFORMATION:

Important: the only version of inxi that is supported is the latest current 
master branch release. No issue reports or bug reports will be accepted for 
anything other than current master branch. No merges, attempts to patch old code
from old releases, will be considered or accepted. If you are not updated to
the latest inxi, do not file a bug report since it's probably been fixed ages
ago. If your distro isn't packaging a current inxi, then file a bug report 
with them, not here. The only valid working code base for inxi is the current 
release of inxi. Distributions should never feel any advantage comes from using
old inxi releases because inxi has as a core promise to you, the end user, that
it will NEVER require new tools to operate. New tools may be required for a new
feature, but that will always be handled internally by inxi, and will not cause
any operational failures. This is a promise, and I will never as long as I run
this project violate that core inxi requirement. Old inxi is NOT more stable 
than current inxi, it's just old, and lacking in bug fixes and features.

inxi is a rolling release codebase, just like Debian Sid, Gentoo, or Arch 
Linux are rolling release GNU/Linux distributions, with no 'release points'.

Why this is apparently so difficult for some people to grasp is beyond me,
particularly with Debian, that has Sid, a rolling release, un-versioned, no
fixed release point, package pool. All my code is rolling release, some of
it just happens to roll more slowly than others. inxi moves slowly some months,
very rapidly others. When it's moving rapidly, it's often wise to wait for it
to slow down, but you don't have to.

Your distro not updating inxi ever, then failing to show something that is
fixed in current inxi is not a bug, and please do not post it here. File 
the issue with your distro, not here. Updating inxi in a package pool will 
NEVER make anything break or fail, period. It has no version based 
dependencies, just software, like gawk, sed, etc. There is never a valid 
reason to not update inxi in a package pool of any distro in the world.

Sys Admin type inxi users always get the first level of support. ie, convince 
us you run real systems and networks, and your issue shoots to the top of 
the line. As do any real bugs. Failure to supply requested debugger data 
will lead to a distinct lack of interest on our part to help you with a 
bug. ie, saying, oh, x doesn't work, doesn't cut it, unless it's obvious why. 

=====================================================================
TAGS - DO NOT ASK FOR INXI TO BE TAGGED!!

In particular, no issue reports will be accepted relating to tagging inxi 
releases. Why? Because tagging is a bad idea, that leads to insecure code 
and packaging practices, and should not be recommended or used by package 
maintainers. A packager should ALWAYS point to the actual commit they got 
their code from, not a tag attached to that commit. For what should be 
obvious reason, you can move tags, delete them, and point to bad code, 
then good code, all without giving any indication at all that the tag or 
its destination have been changed. In other words, relying on tagging to 
identify code releases is identical to relying on fairy tales for security. 
Point to the release commit ID, if you do, you will be pointing to the 
code you downloaded for your package, if you do not, you won't be.

Github makes that very easy: 
https://github.com/smxi/inxi/tarball/[first 7 characters of commit id]
EXAMPLE: https://github.com/smxi/inxi/tarball/1d37e0d
(click it, you'll see the tarball download)

This is a real link, to a real tarball, of a real commit. It's not a fiction,
a fantasy, a misleading and potentially serious security hole, like a tag.

It's also easier to grab that than the somewhat cludgy git method to grab
a specific git commit id. Apparently with git 2.5, that cludgy method will
be replaced by a more basic thing, that corresponds to the svn way to grab
a commit, by commit number, cleanly.

Further, tagging a rolling release code base is absurd, since every packager
is going to grab the current release of the codebase, unless they are very
confused or misguided (and the best way for me to encourage this type of
confusion and misguided action is by tagging any one release, thus suggesting
it is a static release). Thus I would have to tag every single commit since 
I could never know when say, the Arch Linux maintainer is going to grab his
code, or any other distribution maintainer. Further, I would have to go back
and tag every past commit as well, since each and every one was at the time, 
the current release of inxi. That's without exception, no commit ever done 
in the trunk/master branch of inxi has ever not been the current release, by 
definition.

I shouldn't need to waste time noting something that should be obvious to 
anyone with even a faint clue about code, or secure practices in terms of 
having a real pointer to the code you grabbed, in other words not a tag! 
But I will note it here to avoid being asked again about tagging. A tag 
is a post-it sticky note, and should never be considered as a valid pointer, 
just a convenience in some projects that works for some types of programming 
practices, certainly not mine.

All issue reports opened about tagging will be closed immediately (see issues
70/74 if you must, you won't get any different answer by repeating the same bad 
logic again) without comment. File a distro bug report in your distro of choice
if they insist on asking for this bad idea, that's the right place to handle
the problem.

=====================================================================

INXI VERSION NUMBERING:

inxi uses fairly classic version numbering, where the version numbers actually
mean something.

The version number follows these guidelines:
Using example 2.2.28-6

The first digit(s), "2", is a major version, and almost never changes. Only 
a huge milestone, or if inxi reaches 2.9.xx, when it will simply move up to 
3.0.0 just to keep it clean, would cause a change. 

The second digit(s), "2", means a new real feature has been added. Not a 
tweaked existing feature, an actual new feature, which usually also has a new 
argument option letter attached. The second number goes from 0 to 9, and then
rolls over the first after 9. It could also be adding a very complicated 
expansion of existing features, like Wayland. It depends.

The third, "28", is for everything small, can cover bug fixes, tweaks to 
existing features to add support for something, pretty much anything where you
want the end user to know that they are not up to date. The third goes from 0 
to 99, then rolls over the second.

The fourth, "6", is extra information about certain types of inxi updates. 
I don't usually use this last one in master branch, but you will see it 
frequently in branch one,two, etc development since that is used to confirm 
remote test system updates.

The fourth number, when used, will be alpha-numeric, a common version would be,
in say, branch one: 2.2.28-b1-02, in other words, a branch 1 release, version 2.

In the past, now and then the 4th, or 'patch', number, was used in trunk/master
branches of inxi, but I've pretty much stopped doing that because it's confusing.

inxi does not use the fiction of date based versioning because that imparts no
useful information to the end user, when you look at say, 2.2.28, and you last
had 2.2.11, you can know with some certainty that inxi has no major new 
features, just fine tunings and bug fixes. And if you see one with 2.3.2, you 
will know that there is a new feature, almost, but not always, linked to one 
or more new line output items. Sometimes a fine tuning can be quite 
significant, sometimes it's a one line code fix.

### EOF ###