README for inxi - a command line system information tool The new Perl inxi is now here! File all issue reports with the master branch. ===================================================================== MASTER GIT BRANCH: This is the only supported branch, and the current latest commit is the only supported 'release'. There are no, and never will be, any 'releases' of inxi beyond the current commit to master. git clone https://github.com/smxi/inxi --branch master --single-branch OR direct fast and easy install: wget -Nc https://github.com/smxi/inxi/raw/master/inxi OR easy to remember shortcut (which redirects to github): wget -Nc https://smxi.org/inxi NOTE: I have deleted the master-plain branch to avoid confusion since I've removed the legacy .gz files from the branch, which were the only reasons for its existence. I auto tag commits that I feel are somewhat complete at that stage of the coding. There are NO releases, don't even dream of pretending a tagged release holds any significance at all. I only added auto tagging to get the maintainers to stop annoying me about tagging. There is NO repeat NO meaning to the fact a commit is tagged. A tag is a pointer to a commit, and has no further meaning. Every current commit is the active release, all past commits are not supported. Tagging has ZERO meaning, it's purely a formality that certain distros can't figure out how to do without, that's all. NOTE: JUST BECAUSE GITHUB CALLS MY TAGGED COMMITS 'RELEASES' DOES NOT REPEAT NOT MEAN THEY ARE RELEASES!!! I can't change the words on the tag page. They are tagged commmits, period. I did not want to use tags precisely to avoid the idea that inxi has any release that exists that is other than it's current master version, but I decided that it was less pain to add tags than to argue this point any further. ===================================================================== DEVELOPMENT BRANCH: All active development is now done on the inxi-perl branch (pinxi): git clone https://github.com/smxi/inxi --branch inxi-perl --single-branch OR direct fast and easy install: wget -Nc https://github.com/smxi/inxi/raw/inxi-perl/pinxi OR easy to remember shortcut (which redirects to github): wget -Nc https://smxi.org/pinxi Once new features have been debugged, tested, and are stable, they will move to the master branch. ===================================================================== LEGACY BRANCH: If you'd like to look at or check out the Gawk/Bash version of inxi, you can find it here, at the inxi-legacy branch (binxi): git clone https://github.com/smxi/inxi --branch inxi-legacy --single-branch OR direct fast and easy install: wget -Nc https://github.com/smxi/inxi/raw/inxi-legacy/binxi OR easy to remember shortcut (which redirects to github): wget -Nc https://smxi.org/binxi This version will not be maintained, and it's unlikely that I will spend any time on it in the future, but it is there in case it's of use or interest to anyone. ===================================================================== SUPPORT INFO: Do not ask for basic help that reading the inxi -h / --help menus, or man page would show you, and do not ask for features to be added that inxi already has. Also do not ask for support if your distro refuses to update its inxi version, some are bad about that. DOCUMENTATION: http://smxi.org/docs/inxi.htm (smxi.org/docs/ is easier to remember, and is one click away from inxi.htm) The one page wiki on github is only a pointer to the real resources. https://github.com/smxi/inxi/tree/inxi-perl/docs Contains specific Perl inxi documentation, of interest to developers mostly. Includes internal inxi tools, values, configuration items. Also has useful information about Perl version support, including the list of Core modules that _should_ be included in a distribution's core modules, but which are not always unfortunately. HTML MAN PAGE: http://smxi.org/docs/inxi-man.htm INXI OPTIONS: http://smxi.org/docs/inxi-options.htm NOTE: These may not always be up to date, but generally track the most recent inxi commits. ISSUES: https://github.com/smxi/inxi/issues No issues accepted for non current inxi releases. See below for more on that. Unfortunately as of 2.9, no support or issues can be accepted for older inxi's because inxi 2.9 and newer is a full rewrite, and legacy inxi is not being supported since my time is finite (plus of course, one reason for the rewrite was to never have to work with Gawk->Bash again!) SUPPORT FORUMS: http://techpatterns.com/forums/forum-33.html This is the best place to place support issues that may be complicated. If you are developer, use: DEVELOPER FORUMS: http://techpatterns.com/forums/forum-32.html SOURCE VERSION CONTROL: https://github.com/smxi/inxi MAIN BRANCH: master DEVELOPMENT BRANCHES: inxi-perl, one, two, three, android. Dev branches are rarely used, but that's where the really hard new features etc are debugged and worked out. inxi itself has the built in feature to be able to update itself from anywhere, including these branches, which is very useful for development and debugging on many user systems. PULL REQUESTS: Please talk to me before starting to work on any patch, unless it's a trivial bug fix. Please: NEVER even think about looking at or using previous inxi commits, previous to the current one, as a base for a patch. If you do, your patch / pull request will probably be rejected. Developers, get your version from the inxi-perl branch, pinxi, otherwise you may not be current to actual development. inxi-perl pinxi is always equal to or ahead of master branch inxi. inxi has one and only one release, and that is the current one (plus dev releases, of course, but those should never be packaged). All previous releases are immediately obsolete on the commit of every new release. There is no exception to this, and never will be. Man page updates, doc page updates, etc, of course, are easy and will probably be accepted, as long as they are done according to the requirements. inxi releases early, and releases often, when under development. ===================================================================== ABOUT INXI - CORE COMMITMENT TO LONG TERM STABILITY inxi is a command line system information tool. It was forked from the ancient and mindbendingly perverse yet ingenius infobash, by locsmif. That was a buggy, impossible to update or maintain piece of software, so the fork fixed those core issues, and made it flexible enough to expand the utility of the original ideas. Locmsif has given his thumbs up to inxi, so don't be fooled by legacy infobash stuff you may see out there. inxi is lower case, except when I create a text header here in a file like this, but it's always lower case. Sometimes to follow convention I will use upper case inxi to start a sentence, but i find it a bad idea since invariably, someone will repeat that and type it in as the command name, then someone will copy that, and complain that the command: Inxi doesn't exist... The primary purpose of inxi is for support, and sys admin use. inxi is used widely for forum and IRC support, which is I believe it's most common function. If you are piping output to paste or post (or writing to file), inxi now automatically turns off color codes, so the old suggestion to use -c 0 to turn off colors is no longer required. inxi should always show you your current system state, as far as possible, and should be more reliable than your own beliefs about what is in your system, ideally. In other words, the goal in inxi is to have it be right more than it is wrong about any system that it runs on. And not to rely on non current system state data if at all possible. Some things, like memory/ram data, rely on radically unreliable system self reporting based on OEM filling out data correctly, which doesn't often happen, so in those cases, you want to confirm things like ram capacity with a reputable hardware source, like crucial.com, which has the best ram hardware tool I know of. The core mission of inxi is to always work on all systems all the time. Well, all linux systems with the core tools inxi requires to operate installed. Ie, not android, yet. What this means is this: you can have a 10 year old box, or probably 15, not sure, and you can install today's inxi on it, and it will run. It won't run fast, but it will run. I test inxi on a 200 MHz laptop from about 1998 to keep it honest. That's also what was used to optimize the code at some points, since differences appear as seconds, not 10ths or 100ths of seconds on old systems like that. inxi is being written, and tested, on Perl as old as 5.08, and will work on any system that runs Perl 5.08 or later. Pre 3.0.0 Gawk/Bash inxi will also run on any system no matter how old, within reason, so there should be no difference. ===================================================================== BSD SUPPORT BSD support is not as complete as GNU/Linux support due to the fact some of the data simply is not available, or is structured in a way that makes it unique to each BSD. This fragmentation makes supporting BSDs far more difficult than it should be in the 21st century. The BSD support in inxi is an ongoing process, with more features being added as new data sources and types are discovered. All BSD issue reports unless trivial and obvious will require 1 of two things: 1. a full --debug 21 data dump so I don't have to spend days trying to get the information I need to resolve the issue file by painful file from the issue poster. 2. direct ssh access to at least a comparable live BSD version/system, that is, if the issue is on a laptop, access has to be granted to the laptop, or a similar one. 2 is far preferred because in terms of my finite time on this planet of ours, the fact is, if I don't have direct (or SSH) access, I can't get much done, and the little I can get done will take 10 to 1000x longer than it should. That's my time spent (and sadly, with BSDs, largely lost), not yours. I decided I have to adopt this much more strict policy with BSDs after wasting untold hours on trying to get good BSD support, only to see that support break a few years down the road as the data inxi relied in changed structure or syntax, or the tools changed, or whatever else makes the BSDs such a challenge to support. In the end, I realized, the only BSDs that are well supported are ones that I have had direct access to for bebugging and testing. I will always accept patches that are well done, if they do not break GNU/Linux, and extend BSD support, or add new BSD features, and aren't too long. inxi sets initial internal flags to identify that it is a BSD system vs a GNU/Linux system, and preloads some data structures for BSD use, so make sure you understand what inxi is doing before you get into it. inxi will also start on Darwin, OSX's mutated version of a BSD, but my conclusion about Darwin is that it is Unix in name only, and I will not spend a second of my time adding any further support for that crippled broken corporate pseudo-unix system. Don't ask, unless you are willing to pay my normal professional wages to get that support made. ===================================================================== INXI FEATURES AND FUNCTIONALITY inxi's functionality continues to grow over time, but it's also important to understand that each core new feature usually requires about 30 days work to get it stable. So new features are not trivial things, nor is it acceptable to submit a patch that works only on your personal system. One inxi feature (-s, sensors data), took about 2 hours to get working in the alpha test on the local dev system, but then to handle the massive chaos that is actual user sensors output and system variations, it took several rewrites and about 30 days to get somewhat reliable for about 98% or so of inxi users. So if your patch is rejected, it's likely because you have not thought it through adequately, have not done adequate testing cross system and platform, etc. ===================================================================== INXI RELEASE/SUPPORT/ISSUES/BUGS INFORMATION: Important: the only version of inxi that is supported is the latest current master branch release. No issue reports or bug reports will be accepted for anything other than current master branch. No merges, attempts to patch old code from old releases, will be considered or accepted. If you are not updated to the latest inxi, do not file a bug report since it's probably been fixed ages ago. If your distro isn't packaging a current inxi, then file a bug report with them, not here. The only valid working code base for inxi is the current release of inxi. Distributions should never feel any advantage comes from using old inxi releases because inxi has as a core promise to you, the end user, that it will NEVER require new tools to run. New tools may be required for a new feature, but that will always be handled internally by inxi, and will not cause any operational failures. This is a promise, and I will never as long as I run this project violate that core inxi requirement. Old inxi is NOT more stable than current inxi, it's just old, and lacking in bug fixes and features. inxi is a rolling release codebase, just like Debian Sid, Gentoo, or Arch Linux are rolling release GNU/Linux distributions, with no 'release points'. Your distro not updating inxi ever, then failing to show something that is fixed in current inxi is not a bug, and please do not post it here. File the issue with your distro, not here. Updating inxi in a package pool will NEVER make anything break or fail, period. It has no version based dependencies, just software, like Perl 5.xx, lspci, etc. There is never a valid reason to not update inxi in a package pool of any distro in the world (with one single known exception, the Slackware based Puppy Linux release, which ships without the full Perl language. The Debian based one works fine). Sys Admin type inxi users always get the first level of support. ie, convince us you run real systems and networks, and your issue shoots to the top of the line. As do any real bugs. Failure to supply requested debugger data will lead to a distinct lack of interest on our part to help you with a bug. ie, saying, oh, x doesn't work, doesn't cut it, unless it's obvious why. ===================================================================== INXI VERSION NUMBERING: inxi uses fairly classic version numbering, where the version numbers actually mean something. The version number follows these guidelines: Using example 3.2.28-6 The first digit(s), "3", is a major version, and almost never changes. Only a huge milestone, or if inxi reaches 3.9.xx, when it will simply move up to 4.0.0 just to keep it clean, would cause a change. The second digit(s), "2", means a new real feature has been added. Not a tweaked existing feature, an actual new feature, which usually also has a new argument option letter attached. The second number goes from 0 to 9, and then rolls over the first after 9. It could also be adding a very complicated expansion of existing features, like Wayland. It depends. The third, "28", is for everything small, can cover bug fixes, tweaks to existing features to add support for something, pretty much anything where you want the end user to know that they are not up to date. The third goes from 0 to 99, then rolls over the second. The fourth, "6", is extra information about certain types of inxi updates. I don't usually use this last one in master branch, but you will see it in branches one,two, inxi-perl, inxi-legacy since that is used to confirm remote test system patch version updates. The fourth number, when used, will be alpha-numeric, a common version would be, in say, branch one: 2.2.28-b1-02, in other words, a branch 1 release, version 2. In the past, now and then the 4th, or 'patch', number, was used in trunk/master branches of inxi, but I've pretty much stopped doing that because it's confusing. inxi does not use the fiction of date based versioning because that imparts no useful information to the end user, when you look at say, 2.2.28, and you last had 2.2.11, you can know with some certainty that inxi has no major new features, just fine tunings and bug fixes. And if you see one with 2.3.2, you will know that there is a new feature, almost, but not always, linked to one or more new line output items. Sometimes a fine tuning can be quite significant, sometimes it's a one line code fix. A move to a new full version number, like the rewrite of inxi to Perl, would reflect in first version say, 2.9.01, then after a period of testing, where most little glitches are fixed, a move to 3.0.0. These almost never happen. I do not expect for example version 4.0 to ever happen after the 3.0 release of early 2018, unless so many new features are added that it actually hits 3.9, then it would roll over to 4. ### EOF ###