===================================================================================== Version: 2.1.22 Patch Version: 00 Script Date: 2014-04-27 ----------------------------------- Changes: ----------------------------------- Quick update to -D, now inxi uses the total partition swap space to calculate the disk used percentage as well. Since swap space is not available as disk space, it makes sense to me to count it as used. -P/-p show the percent of swap used as well. ----------------------------------- -- Harald Hope - Sun, 27 Apr 2014 14:41:06 -0700 ===================================================================================== Version: 2.1.22 Patch Version: 00 Script Date: 2014-04-27 ----------------------------------- Changes: ----------------------------------- New version, new tarball. A bug fix for btrfs, which does not internally use /dev/sdx[number] to identify a partition, but rather the basic /dev/sdc for example. This made -D show wrong disk used percentage. Also, I added --total for df that have that supported, there is however an oddity which you can see here: df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \ --exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \ --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \ awk 'BEGIN {total=0} !/total/ {total = total + $4 }END {print total}' result: 614562236 df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \ --exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \ --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \ awk 'BEGIN {total=0} /^total/ {total = total + $4 }END {print total}' result: 614562228 df -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \ --exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \ --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \ awk 'BEGIN {total=0} {total = total + $4 }END {print total}' result: 614562236 In my tests, using --total gives a greater disk user percentage than adding the results up manually, as inxi did before, and still does for systems without --total for df. df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \ --exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs \ --exclude-type=procfs --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs \ --exclude-type=unionfs Filesystem Type 1024-blocks Used Available Capacity Mounted on /dev/disk/by-label/root-data ext3 12479556 12015624 335816 98% / /dev/sdc9 ext3 20410156 18013360 1979432 91% /home /dev/sdc7 ext3 4904448 3785460 1016672 79% /media/sdb2 /dev/sdc5 ext3 30382896 27467220 2295720 93% /var/www/m /dev/sdc8 ext3 61294356 41849300 18196972 70% /home/me/1 /dev/sdb1 ext3 307532728 285159432 20810456 94% /home/me/2 /dev/sdd1 ext3 26789720 18153076 7542620 71% /home/me/3 /dev/sdd2 ext3 213310776 206932912 2040960 100% /home/me/4 /dev/sda7 ext3 10138204 1185772 8434348 13% /home/me/5 total - 687242840 614562156 62652996 91% - Strange, no? the data is in blocks, and it should of course in theory add up to exactly the same thing. However, because --total lets df do the math, I'm going to use that for now, unless someone can show it's not good. inxi still falls back for bsds and older df to the standard method. ----------------------------------- -- Harald Hope - Sun, 27 Apr 2014 12:49:06 -0700 ===================================================================================== Version: 2.1.21 Patch Version: 00 Script Date: 2014-04-24 ----------------------------------- Changes: ----------------------------------- New tarball, small update, added hopefully firewire support to drive type id. That's searching for ieee1394- hopefully that will do it. ----------------------------------- -- Harald Hope - Thu, 24 Apr 2014 13:22:51 -0700 ===================================================================================== Version: 2.1.21 Patch Version: 00 Script Date: 2014-04-24 ----------------------------------- Changes: ----------------------------------- New version, tarball. This fixes one small oversight, placing USB in front of ID-[x] of disk drive lists. Was showing USB ID-1: /dev/sde now shows: ID-1: USB /dev/sde that is more intuitive and keeps the columns in alignment more or less, easier to read. Second, fixes a bug with some file systems / usb drives where they do not use usb- in the /dev/disk/by-id line but only wwn- https://access.redhat.com/site/documentation/en -US/Red_Hat_Enterprise_Linux/5/html/Online_Storage_Reconfiguration_Guide/persistent_naming.html explains it somewhat. the fix is adding a second if null test of the device /dev/sdx in by-path, that seems to fix the issue. by-path does have the usb- item, though it does not have the name so it's not as reliable in absolute terms, but it's fine as a second step fallback option. ----------------------------------- -- Harald Hope - Thu, 24 Apr 2014 11:47:08 -0700 ===================================================================================== Version: 2.1.20 Patch Version: 00 Script Date: 2014-04-08 ----------------------------------- Changes: ----------------------------------- While this release has some new features, they are all intended for development use for the next major feature, -m / memory, so there is no particular reason to package this release. There is a new development option, -! 33, which lets me override /sys data use for -M, which is useful to debug dmidecode output for -m and other features. No new version, new man. There may be a few more of these releases, but functionally there is no particular reason to make a new package if you are a maintainer, so there is no new version number. This release is a preparation for some branches/one/inxi tests that will be run in the future. The man/help document -! 33 just to have it there, but it should make no difference to anyone but me at this stage. ----------------------------------- -- Harald Hope - Mon, 14 Apr 2014 13:31:24 -0700 ===================================================================================== Version: 2.1.20 Patch Version: 00 Script Date: 2014-04-08 ----------------------------------- Changes: ----------------------------------- A few fixes to 2.1.20, bmips broke in some cases, that's fixed now. Also changed the way to handle bad ARM data, when bogomips are too low, < 50, we try to get the data from /sys, but now this runs on all the cores, so it may work as well on the multicore arm if the /proc/cpuinfo has bogomip that is too low and no cpu frequency. ----------------------------------- -- Harald Hope - Wed, 09 Apr 2014 00:09:49 -0700 ===================================================================================== Version: 2.1.20 Patch Version: 00 Script Date: 2014-04-08 ----------------------------------- Changes: ----------------------------------- New version, tarball, ARM cpu /proc/cpuinfo has broken the bogomips output, since this is an upstream bug, I'm adding in a quick hack that will work maybe for single core ARM cpus, but NOT for multicores that have the same issue. ----------------------------------- -- Harald Hope - Tue, 08 Apr 2014 17:15:41 -0700 ===================================================================================== Version: 2.1.19 Patch Version: 00 Script Date: 2014-04-06 ----------------------------------- Changes: ----------------------------------- New version, tarball, correction of loop counts for -p/-P ID-, this requires a third counter to get all the stuff right. Sorry about the extra release, that's life. ----------------------------------- -- Harald Hope - Sun, 06 Apr 2014 14:33:46 -0700 ===================================================================================== Version: 2.1.18 Patch Version: 00 Script Date: 2014-04-04 ----------------------------------- Changes: ----------------------------------- New version/tarball. This completes, I think, the line wrap update. -o is now handled, unmounted drives. IMPORTANT: some distros use inxi for detecting partitions, the syntax on the following have changed slightly: HDD: per drive changes from: 1: id: to ID-1: Partitions: per partition changes from ID: to ID-1: Unmounted partitions: per unmounted changes from ID: to ID-1 You see the pattern, they are all the same now, and they are all numbered. I think this is easier to read when scanning long lines of drives/partitions, or even short ones. Also fixed a long standing oddity, not a bug, but for some weird reason, -p did not include the location, like /dev/sda1, unless -l or -u were used. That makes no sense so I have moved the dev/remote location output to standard -p/-P Except for bug fixes, this completes the overally line wrap update, all lines wrap, you can set widths with -y now, and the old issue of not fitting nicely into 80 column wide widths is solved. Note that in some areas, p/P for example, at times if the mount point or remote location is very long the line may still wrap, but making this perfect is too convoluted so I'm calling it good enough now, all lines are handled reasonably well, certainly radically better than before 2.1.0. ----------------------------------- -- Harald Hope - Fri, 04 Apr 2014 11:08:25 -0700 ===================================================================================== Version: 2.1.17 Patch Version: 00 Script Date: 2014-04-03 ----------------------------------- Changes: ----------------------------------- New version, new man page, new tarball. Added -y [integer >= 80] option. This allows for absolute override of width settings. This overrides any dynamically detected widths, as well as the globals: COLS_MAX_CONSOLE='115' COLS_MAX_IRC='105' Now that inxi widths are largely dynamic in terminal, with a few lingering exceptions, it made sense to also allow for overrides of this. This is useful in cases where for example you want to output inxi to text file or for other purposes, or if you just want to test the widths, as in my case. -y cannot be used with --recommends, but otherwise it works fine, with --help/-c 94-99 you have to put -y first in the list of options. Example: inxi -v7 -y150 > inxi.txt will ignore the terminal settings and output the lines at basically max length. ----------------------------------- -- Harald Hope - Thu, 03 Apr 2014 10:41:07 -0700 ===================================================================================== Version: 2.1.16 Patch Version: 00 Script Date: 2014-04-02 ----------------------------------- Changes: ----------------------------------- New version, tarball. This fix only impacts bsd sed, but it fixes the line length failure issue because bsd sed doesn't work with \x1b, but it does when you do: ESC=$(echo | tr '\n' '\033' ) I found this trick on: http://unix.stackexchange.com/questions/42321/how-can-i-instruct-bsd-sed-to-interpret-escape-sequences-like-n-and-t No other changes. Non bsd users, you can ignore this. ----------------------------------- -- Harald Hope - Wed, 02 Apr 2014 21:24:52 -0700 ===================================================================================== Version: 2.1.15 Patch Version: 00 Script Date: 2014-04-01 ----------------------------------- Changes: ----------------------------------- new version/tarball. This corrects some subtle issues with line wraps: Audio -A - now wrap is fully dynamic down to 80 characters, and also the expansion of ALSA to Advanced Linux Sound System only happens if that fits in the display width. -N/-n/-i - Most networking/ip address stuff wraps now. -d - optical drive data wraps better now too. This more or less completes the line wrap redo. ----------------------------------- -- Harald Hope - Tue, 01 Apr 2014 12:39:44 -0700 ===================================================================================== Version: 2.1.14 Patch Version: 00 Script Date: 2014-03-31 ----------------------------------- Changes: ----------------------------------- Forgot, added slitaz-release to distros derived. that's as slackware derived one. ----------------------------------- -- Harald Hope - Mon, 31 Mar 2014 18:10:02 -0700 ===================================================================================== Version: 2.1.14 Patch Version: 00 Script Date: 2014-03-31 ----------------------------------- Changes: ----------------------------------- new version/tarball. Tiny fix in debugger, it turns out that in some systems, the command: strings --version used in the debugger results in a hang, which you can duplicate with: strings alone, without any argument or info, that will hang too, so I assume if the system doesn't have the --version parameter, strings ignores that, and basically just does what it would do with no option, hang. Thanks for user ypharis persistence in tracking down this issue. So far only appeared on slackware based distros, but since the debugger should 'just work', removing the version test. ----------------------------------- -- Harald Hope - Mon, 31 Mar 2014 17:49:48 -0700 ===================================================================================== Version: 2.1.13 Patch Version: 00 Script Date: 2014-03-30 ----------------------------------- Changes: ----------------------------------- New version, only relevant to Porteus distro, a slackware derived distro, should now id it correctly. No other changes. ----------------------------------- -- Harald Hope - Sun, 30 Mar 2014 11:54:12 -0700 ===================================================================================== Version: 2.1.12 Patch Version: 00 Script Date: 2014-03-27 ----------------------------------- Changes: ----------------------------------- new version, fixed zfs raid failure to report raid devices on some systems. Added wrapping for -D disk option. Note that -d is not correctly wrapping because the lines are too long with extra data, but it's ok for now. ----------------------------------- -- Harald Hope - Thu, 27 Mar 2014 15:33:33 -0700 ===================================================================================== Version: 2.1.11 Patch Version: 00 Script Date: 2014-03-26 ----------------------------------- Changes: ----------------------------------- Ignore change 2.1.12, the speed data was too inconsistent, using >>> since it's cleaner and seems to be faster on some cpus, slower on others. ----------------------------------- -- Harald Hope - Wed, 26 Mar 2014 15:28:08 -0700 ===================================================================================== Version: 2.1.12 Patch Version: 00 Script Date: 2014-03-26 ----------------------------------- Changes: ----------------------------------- new version: this is only an optimization release, testing some slightly more efficient methods: something <<< $variable is signficantly slower than: echo $variable | something so I replaced almost all instances of <<< with echo ...| I've seen speed differences of up to 10% but it's not consistent, so this is just something to boost performance slightly on older systems I'd guess. ----------------------------------- -- Harald Hope - Wed, 26 Mar 2014 14:54:39 -0700 ===================================================================================== Version: 2.1.11 Patch Version: 00 Script Date: 2014-03-26 ----------------------------------- Changes: ----------------------------------- New version: fixed an old bug, with -c 0, no colors, RED and NORMAL color codes were not set to null, which results in some cases with red output, along with turning terminal/console font color red. ----------------------------------- -- Harald Hope - Wed, 26 Mar 2014 12:44:53 -0700 ===================================================================================== Version: 2.1.10 Patch Version: 00 Script Date: 2014-03-25 ----------------------------------- Changes: ----------------------------------- New version; added supybot/limnoria/gribble support. This only works when the supybot 'SHELL' command is used, 'CALL' gives the user irc client data, and supybot etc are not detectable. Fine tuned some error message lengths so they fit into 80 columns or so. ----------------------------------- -- Harald Hope - Tue, 25 Mar 2014 13:55:13 -0700 ===================================================================================== Version: 2.1.9 Patch Version: 00 Script Date: 2014-03-24 ----------------------------------- Changes: ----------------------------------- New version, fixed cpu core speed wrapping, improved -p and -P wrapping, though some lines will still be too long, but not as many. ----------------------------------- -- Harald Hope - Mon, 24 Mar 2014 18:42:06 -0700 ===================================================================================== Version: 2.1.8 Patch Version: 00 Script Date: 2014-03-24 ----------------------------------- Changes: ----------------------------------- New version. Added dynamic wrapping to -G, and also am now wrapping -C per cpu cores speeds, for systems with a lot of them, that will clean up the output. Added dynamic wrapping to --recommends and -c 94-99. These are the main things, there's a few smaller issues with -xx output on -N/-n/-i but those will noly really show with full output and it takes a while to get this stuff stable so maybe some other time, but it's ok for now. ----------------------------------- -- Harald Hope - Mon, 24 Mar 2014 16:58:33 -0700 ===================================================================================== Version: 2.1.7 Patch Version: 00 Script Date: 2014-03-18 ----------------------------------- Changes: ----------------------------------- new version, attempt 2 at detecting all possible syntaxes for cards. Now using the bus id itself to determine if the VGA compatible controller 3D controller Display Controller refer to separate chips or the same one. Bus id gives the data needed, because the video chip, the real card, that is, is on for example 00:05.0 the trailing .0 is the key, that's the actual card. The audio or display controller for the same card would be for example: 00:05.1 I don't know if this is fully reliable, but it will have to do, either some cards as is get missed, or some cards get double id'ed, unless I use a hack like this. There's nothing else I can find but the bus id to determine that it's the same physical device or not. ----------------------------------- -- Harald Hope - Tue, 18 Mar 2014 21:18:27 -0700 ===================================================================================== Version: 2.1.6 Patch Version: 00 Script Date: 2014-03-18 ----------------------------------- Changes: ----------------------------------- new version, bug fix, adding 3D controller to output causes doubled card id in some cases. ----------------------------------- -- Harald Hope - Tue, 18 Mar 2014 19:17:55 -0700 ===================================================================================== Version: 2.1.5 Patch Version: 00 Script Date: 2014-03-17 ----------------------------------- Changes: ----------------------------------- New version, serious bug fix, do NOT use 2.1.4, it will fail to start. Bad copy/paste. ----------------------------------- -- Harald Hope - Tue, 18 Mar 2014 01:30:53 -0700 ===================================================================================== Version: 2.1.4 Patch Version: 00 Script Date: 2014-03-17 ----------------------------------- Changes: ----------------------------------- New version. Some BSD fixes, and a more important fix, added 'display controller' to graphics card detection, that's a new one on me. Dual card systems might use this. 00:02.0 Display controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1) Some more switches to bash native methods as well. ----------------------------------- -- Harald Hope - Mon, 17 Mar 2014 19:23:42 -0700 ===================================================================================== Version: 2.1.3 Patch Version: 00 Script Date: 2014-03-15 ----------------------------------- Changes: ----------------------------------- New version. Big set of changes: changed all ver: and version: to v:; changed all bash ${var} to $var where appropriate to avoid extra overhead of ${..}; removed 'basename' and replaced with ${path##*/} which avoids unnessary subshells. Fixed dynamic line wraps on -I and -S lines, now those in most cases will work well down to 80 cols. Fixed bug in optical drives, at some point in the last few years, the kernel in /sys changed the path to the optical drive data, added in /ata8/ (example) so both methods are now handled. This should fix a lot of failures to show optical drive brand name etc. Added weechat detection, trying also supybot/limnoria detection in irc client version. There was weechat-curses, but I guess they finally dropped the -curses. Limnoria is a fork of supybot but still uses the supybot program name, but added in limnoria too if they get around to changing that. More dynamic sizing tweaks, more optimization of code. Discovered that dipping into gawk is almost 250x more expensive in terms of execution time than using bash variable. Will change to use bash directly as time goes along where it's safe and accurate. Added handling to support /run paths using directories, like /run/gdm/gdm.pid for dm data. ----------------------------------- -- Harald Hope - Sun, 16 Mar 2014 15:09:40 -0700 ===================================================================================== Version: 2.1.2 Patch Version: 00 Script Date: 2014-03-14 ----------------------------------- Changes: ----------------------------------- no version change, just added wrapper around tput cols so only use it if in terminal ----------------------------------- -- Harald Hope - Sat, 15 Mar 2014 10:53:17 -0700 ===================================================================================== Version: 2.1.2 Patch Version: 00 Script Date: 2014-03-14 ----------------------------------- Changes: ----------------------------------- New version. Updated dynamic sizing, fixed some glitches in cpu flags, fixed bugs in cpu main. Cleaned up a few more variable and width issues. Used a few more ${#var} for counting. ----------------------------------- -- Harald Hope - Fri, 14 Mar 2014 20:39:13 -0700 ===================================================================================== Version: 2.1.1 Patch Version: 00 Script Date: 2014-03-14 ----------------------------------- Changes: ----------------------------------- New Version, new man. This continues the dyanamic line sizing, I'm doing these one at a time to make it easier to test stuff one by one. Full refactoring/reordering of top global variables, moved user/maintainer set variables to top, and clearly identify all globals. Changed LINE_MAX to COL_MAX but all user configuration files will stay working since inxi now will check for that and translate them to the new variable names. New lines fixed, -C cpu and -f cpu plus full flags. Flags output is now fully dynamic to display screen in terminal/console. Moved cpu short flags to -x because it's not that important in general and just clutters things up in my opinion. Print flags/bogomips on separate line if line greater than display width. The rest of the lines will get a similar treatment, but it takes a bit of trial and error for each line to get it working right. Note that IRC line lengths are NOT dyanamic unless I can find a way to determine the column width of irc clients, but that won't be accurate since fonts vary in widths for each character. CPU was the worst offender in my opinion in terms of regular output wrapping to new line messily, next will be the things with ports/chip id/card id. Tightened up a bit more the dyanamic help / version output handler. ----------------------------------- -- Harald Hope - Fri, 14 Mar 2014 13:14:51 -0700 ===================================================================================== Version: 2.1.0 Patch Version: 00 Script Date: 2014-03-13 ----------------------------------- Changes: ----------------------------------- New version, new man page. Finally, after all these years, dynamically resized to terminal window column width help/version outputs. There is a significant slowdown to achieve this, but I've optimized it as much as I could so it should be acceptable for most users now. ----------------------------------- -- Harald Hope - Thu, 13 Mar 2014 19:26:32 -0700 ===================================================================================== Version: 2.0.0 Patch Version: 00 Script Date: 2014-03-12 ----------------------------------- Changes: ----------------------------------- New feature, not new line option though. Now shows init type with -x (also shows rc type if openrc). -xx shows init / rc version number. Change runlevel to target if systemd and if non numeric runlevel given. Should support systemd/upstart/epoch/runit sysvinit. Supports openrc as extra data if it's present. Rearranged -I line a bit but really just exchanged Runlevel: for Init: v: Runlevel: default: This is the first step, some of the init system ID methods are weak and non robust and this may need to be revised, but it should for now identify systemd/upstart quite accurately, and in most cases sysvinit. Note that to get sysvinit version number requires tool: strings which in debian/ubuntu is in package binutils. I don't know the package names for arch/fedora/etc for the recommends check tool in inxi yet. I believe this will be good enough for a first draft version, but over time we'll get it more fine tuned, but as it is now, it should cover at least 99% of users, which isn't bad. ----------------------------------- -- Harald Hope - Wed, 12 Mar 2014 17:12:11 -0700 ===================================================================================== Version: 1.9.19 Patch Version: 00 Script Date: 2014-03-03 ----------------------------------- Changes: ----------------------------------- New version; updated man page. Changed slightly the output for x server, in preparation for adding alternate display servers, like Wayland or Mir. Rather than release all the stuff at once I'm going to do it bit by bit. Currently I have not found a wayland iso test cd that boots in virtual box so I will have to wait to really add support there. ----------------------------------- -- Harald Hope - Mon, 03 Mar 2014 15:27:05 -0800 ===================================================================================== Version: 1.9.18 Patch Version: 00 Script Date: 2014-01-13 ----------------------------------- Changes: ----------------------------------- New version; new tarball; new man page. Added Unity desktop support; added -xx feature to show default runlevel, using systemd/upstart/sysvinit type default tests. Fixed gtk library version detections, now will support dpkg/pacman version tests, which should give more data to more people than previously, where the old tests usually would return null unless gtk dev packages were installed on the system. ----------------------------------- -- Harald Hope - Mon, 13 Jan 2014 14:57:38 -0800 ===================================================================================== Version: 1.9.17 Patch Version: 00 Script Date: 2013-12-02 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Fixed new gnome change, they, of course, removed gnome-about and so version numbers failed. Now first trying gnome-session to get version number. Also, there's a bug in at least gtk detection in opensuse, not sure what it is, they could be using a different syntax for the test: pkg-config --modversion gtk+-3.0 returns no such package on gnome 3.10 installs, but I have no idea what package name to test for there in this case. So leaving gtk version bugs unhandled due to no user information or feedback, if you want it fixed or if it works for your distro, let me know and also if it does not work, tell me the correct commmand, with its output, to get gtk version. That's for inxi -Sx output that is. ----------------------------------- -- Harald Hope - Mon, 02 Dec 2013 13:48:35 -0800 ===================================================================================== Version: 1.9.16 Patch Version: 00 Script Date: October 6 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Only for uprmq distros, small update to add support for another repo type output, the initial listing was not complete of possible syntaxes. Now handles: Nonfree Updates (Local19) /mnt/data/mirrors/mageia/distrib/cauldron/x86_64/media/nonfree/updates as well, apparently that is a possible output format in certain cases with urpmq. Non urpmq distros ignore this update, there are no other actual changes. ----------------------------------- -- Harald Hope - Sun, 06 Oct 2013 11:06:36 -0700 ===================================================================================== Version: 1.9.15 Patch Version: 00 Script Date: October 4 2013 ----------------------------------- Changes: ----------------------------------- New version, tarball. Added urpmq for -r. Other distros than Mandriva, Mageia, no other changes so no need to update unless you want to. This adds support for Mandriva, Mageia. urpmq parsing is similar but not identical to pisi. ----------------------------------- -- Harald Hope - Fri, 04 Oct 2013 18:24:55 -0700 ===================================================================================== Version: 1.9.14 Patch Version: 00 Script Date: September 10 2013 ----------------------------------- Changes: ----------------------------------- This does not have a new version number (there is a new date), and is only for solusos, so all other distro maintainer can ignore this update. New tarball. Adds support for solusos-release distro file in /etc/. ----------------------------------- -- Harald Hope - Tue, 10 Sep 2013 10:49:29 -0700 ===================================================================================== Version: 1.9.14 Patch Version: 00 Script Date: August 20 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Fixed a bug / issue with failed usb nic detection, amazingly, the regex in inxi failed to check for Ethernet.*Adapter, heh. Most usb nics are wifi, so I guess ethernet just escaped me. ----------------------------------- -- Harald Hope - Tue, 20 Aug 2013 12:26:10 -0700 ===================================================================================== Version: 1.9.13 Patch Version: 00 Script Date: August 12 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Fixed a bug in Xorg where it shows drivers as unloaded when they are actually loaded. Since we can't fix xorg, inxi will try to work around this bug by validating one step further in the Xorg.0.log data, to confirm that drivers noted as loaded/unloaded/failed are actually running the display(s) of the system. There is a possible case of error that might happen due to this change in the case of a system with a complex xorg that uses two drivers/modules to run two different displays, ie, nvidia on one, and amd on the other, for example, or intel/nvidia, etc. However, if that bug appears, we'll get that data set of debugging output and fix it at that point. This fix repairs an existing xorg bug that is unlikely to get fixed any time soon (the call to load the detected drivers, eg, vesa, intel, is repeated, causing a failure of driver already loaded on the second occurance. ----------------------------------- -- Harald Hope - Mon, 12 Aug 2013 16:20:51 -0700 ===================================================================================== Version: 1.9.12 Patch Version: 00 Script Date: July 2 2013 ----------------------------------- Changes: ----------------------------------- Tiny change, no new version, removed a stray 's' line 4306 that may have made certain distro ids get slightly corrupted, but this is so trivial just fixing it, new tarball. ----------------------------------- -- Harald Hope - Sat, 13 Jul 2013 11:47:48 -0700 ===================================================================================== Version: 1.9.12 Patch Version: 00 Script Date: July 2 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Two new desktop/window managers added: spectrwm (similar to scrotwm) and herbstluftwm. Both tested and working, thanks anticap from Antix for doing the testing/issue report on this. ----------------------------------- -- Harald Hope - Mon, 01 Jul 2013 15:13:24 -0700 ===================================================================================== Version: 1.9.11 Patch Version: 00 Script Date: June 19 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. The recent bug fixes reminded me to check for ARM working, that had some bugs too, so I've updated that. -f for ARM now shows features instead of flags, and the -C regular cpu output does not show cache/flags for arm cpus becuase they don't have those features. Added some flags passed to various cpu functions and better detections of ARM cpu to handle dual core and other issues that were not handled before as well, or at all. ----------------------------------- -- Harald Hope - Wed, 19 Jun 2013 19:14:10 -0700 ===================================================================================== Version: 1.9.10 Patch Version: 00 Script Date: June 19 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Another stab at finally fixing the cpu / core count failures on fringe cases. This required fixing some core logic assumptions that are not currently correct, particularly on two cases, some xeon cpus fail to show core id for each core, showing 0 for all of them, second, vm cpus do not show physical ids at all for at least intel, nor do they show core id. While we can't get HT totally reliable, particularly for vm xeon, since inxi has no way to know in that case if a core is attached to a physical core or a virtual one, all of them being virtual in that case, but still inxi is now reporting the correct number of cores, or threads in vm xeons, and is not showing multicore cpus as single core, which was the main issue. This required redoing the counter logic for the cpu/core/physical arrays, now they are set independently, and can handle any of the others not being set, without creating an error or failure condition. Also added in last check for a certain intel case where core id is 0 but > 1 physical cores exist, that now also shows the correct cpu / core count. While this is tested on many data sets of proc cpuinfo, it's still possible there is a fringe case I have not seen that will trigger yet another unexpected behavior. ----------------------------------- -- Harald Hope - Wed, 19 Jun 2013 17:22:42 -0700 ===================================================================================== Version: 1.9.9 Patch Version: 00 Script Date: June 16 2013 ----------------------------------- Changes: ----------------------------------- new version, new tarball. Added support for openSUSE repo syntax/location, as long as it's zypp or yum it will work. If it's both then it will show only one I believe, if that's a possible scenario, no idea. Added one more fix for those pesky intel vm cpu core errors, now if /proc/cpuinfo shows no siblings at all, and no core_id, but does have physical id, it will use the count for physical id as a default for core count. Not perfect, but better than calling a dual core cpu a single core. There's still a lot of mysteries with vm versions of kvm cpus, for example, if you see a dual core xeon, is that actually one core with ht, or two cores? There is no way to find that information out that I can see that is reliable. ----------------------------------- -- Harald Hope - Sun, 16 Jun 2013 13:56:28 -0700 ===================================================================================== Version: 1.9.8 Patch Version: 00 Script Date: June 14 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Some subtle bug fixes, a kvm virtual machine uses disk id in /proc/partitions of 253, which made the disk totals fail to show up at all. Added that in. Moved sourcing of configuration files to right after initialize_data so that some variables can be forced to different values before the next set of system/app checks. This is to allow specifically turning off, for some headless servers where $DISPLAY is not null due to a bash configuration bug, these: B_SHOW_X_DATA='false' B_RUNNING_IN_X='false' Setting those two to false in inxi.conf will turn off all the X checks etc even if the $DISPLAY is set to non null. Added in support for ksplice kernel version, requires installed uptrack-uname, if that is present and if uptrack-name kernel version is different from uname then it will add (ksplice) to kernel version string, and use ksplice kernel version. Also created a single function get_kernel_version for use by short form/long form inxi output. For intel xeon cpus, trying a work around for a bug in /proc/cpuinfo which fails to show core_id or physical_id for cpus, using siblings / 2 for xeons with no actual core counts. Fixed a bug that made fixes for multimounted partitions fail for disk used. Added in support for also excluding single partitions mounted to different places. Also fixed grsec kernel different handling of partitions in /proc/partition and df -hTP, doesn't use standard partition numbering. This can't be perfect because inxi cannot know what the actual disk sizes are, but it's an ok guess. example: /dev/xvdac (uses 'c' instead of '3' for partition, and does not show anything for disk itself. ----------------------------------- -- Harald Hope - Fri, 14 Jun 2013 12:36:57 -0700 ===================================================================================== Version: 1.9.7 Patch Version: 00 Script Date: May 25 2013 ----------------------------------- Changes: ----------------------------------- New tarball, version, man page. Improved remote weather, now it uses -W, and deprecated -! location=.. That was too hard to type and too hard to remember. Also do more dyanamic reordering of weather output, depending on how much data is present, and how many x options are used. Added error handling for generic deprecated options, and for options that do not have the correct syntax for OPTARG, like with -W. This should about do it for the weather option for now unless I missed something somewhere. ----------------------------------- -- Harald Hope - Sat, 25 May 2013 20:16:01 -0700 ===================================================================================== Version: 1.9.6 Patch Version: 00 Script Date: May 19 2013 ----------------------------------- Changes: ----------------------------------- new version, tarball. Bug fix, overly loose regex removed na from country/state/city strings, like nashville. ----------------------------------- -- Harald Hope - Sun, 19 May 2013 20:06:44 -0700 ===================================================================================== Version: 1.9.5 Patch Version: 00 Script Date: May 18 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Fixed some lintian issues in man page, changed man/help for -! location= option, to indicate that users must replace space with + themselves. Because of how bash handles these options, inxi cannot add in + signs itself automatically. This should be closer to cleanup of this new feature. ----------------------------------- -- Harald Hope - Sat, 18 May 2013 10:50:06 -0700 ===================================================================================== Version: 1.9.04 Patch Version: 00 Script Date: May 17 2013 ----------------------------------- Changes: ----------------------------------- new version, tarball. Fixed issue with spaces in names for cities/states/countries, added man and help instructions to remove spaces and examples. ----------------------------------- -- Harald Hope - Fri, 17 May 2013 22:35:59 -0700 ===================================================================================== Version: 1.9.03 Patch Version: 00 Script Date: May 17 2013 ----------------------------------- Changes: ----------------------------------- new tarball, version, bug fixes on weather, also optimized speed for slow isps, and added a global that can be set in user / system configs to make a longer wget time out. Default is 8 seconds. This should take care of the failure from slow load issue reported. ----------------------------------- -- Harald Hope - Fri, 17 May 2013 22:07:29 -0700 ===================================================================================== Version: 1.9.02 Patch Version: 00 Script Date: May 17 2013 ----------------------------------- Changes: ----------------------------------- new version, new tarball, bug fix for weather ----------------------------------- -- Harald Hope - Fri, 17 May 2013 21:10:21 -0700 ===================================================================================== Version: 1.9.01 Patch Version: 00 Script Date: May 17 2013 ----------------------------------- Changes: ----------------------------------- new tarball, version. Bug fix on -! location=, forgot to have it pack its own location array, that's now correct. ----------------------------------- -- Harald Hope - Fri, 17 May 2013 20:17:32 -0700 ===================================================================================== Version: 1.9.00 Patch Version: 00 Script Date: May 17 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location= This lets users send an alternate location using either or or (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled. ----------------------------------- -- Harald Hope - Fri, 17 May 2013 18:47:24 -0700 ===================================================================================== Version: 1.8.47 Patch Version: 00 Script Date: May 3 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Made separators surround the partition id, that avoids any possible errors with detections, also added in missing detection for separator. ----------------------------------- -- Harald Hope - Fri, 03 May 2013 15:41:26 -0700 ===================================================================================== Version: 1.8.46 Patch Version: 00 Script Date: May 3 2013 ----------------------------------- Changes: ----------------------------------- New version, tarball. Fixed a small issue that would create a wrong reporting of disk useage if bind mounts are used, ie, multiple binds to a single mount. Now inxi will check a list of the previously used partitions before adding the size of the used space to the total used, if the partition has already been used it will skip it. This was/is a quick and dirty fix, but it's totally fine I believe and should resolve two separate issues: 1. use of bind mount method, where multiple partition names are bound to the same partition 2. accidental dual mounting to the same partition. partitions section will still show the same data, ie, if bind is used, it will show all the bind mounts even when they are attached/bound to a partition that is already listed. This seems useful information, though maybe we can get the key word 'bind' in there somehow, but for now I won't worry about that issue, that's just a nice to have, not a bug. ----------------------------------- -- Harald Hope - Fri, 03 May 2013 13:52:44 -0700 ===================================================================================== Version: 1.8.45 Patch Version: 00 Script Date: March 2 2013 ----------------------------------- Changes: ----------------------------------- New version, tarball. As always with fixes, one thing creates a bug in another. Fixed linux driver version handling, now only trimming off number from bsd drivers. Some linux drivers, like tg3 for broadcom ethernet, have numbers ending them. So this is a bug fix for 1.8.44 release mainly. Also includes openbsd initial fixes for some issues related to sysctl parsing for cpu and ram. ----------------------------------- -- Harald Hope - Sat, 02 Mar 2013 09:44:17 -0800 ===================================================================================== Version: 1.8.44 Patch Version: 00 Script Date: February 28 2013 ----------------------------------- Changes: ----------------------------------- no version change, just added 'chipset' to banlist to filter out. ----------------------------------- -- Harald Hope - Thu, 28 Feb 2013 22:14:33 -0800 ===================================================================================== Version: 1.8.44 Patch Version: 00 Script Date: February 28 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. This version brings the -A, -G, -N, -n, -i pci data to bsd. Using a pciconf parser to do most of the heavy lifting in this one. Two functions do the main pci card processing for audio, graphics, and networking. All seems to be shipshape and working, tested on freebsd 7.3, 9.0, and 9.1 and the output is consistent. ----------------------------------- -- Harald Hope - Thu, 28 Feb 2013 21:50:57 -0800 ===================================================================================== Version: 1.8.43 Patch Version: 00 Script Date: February 28 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Improved B_ALLOW_UPDATES handling, now if set to false, turns off all -h and -H menu options for updating. Also triggers an error message if you use -U or -! <10-16/http://>. Distro maintainers, take note, if you used the B_ALLOW_UPDATES flag, you no longer need to change the code anywhere, the error messages and blocking the -h output for update features is automatic as soon as the flag is set to 'false'. I needed to change the -! handling because -! is now also being used for extra features like -! 31 and -! 32 and probably more stuff in the future, plus the -! 30 used by things like the inxi gui tool being worked on by trash80. Also included in this version are more bsd changes, including initial function for pciconf data parsing, this will be used for -A, -G, and -N options for card data. Further bsd improvements are better error/no data available messages for -D and -o. ----------------------------------- -- Harald Hope - Thu, 28 Feb 2013 15:30:07 -0800 ===================================================================================== Version: 1.8.42 Patch Version: 00 Script Date: February 27 2013 ----------------------------------- Changes: ----------------------------------- New version, small bug fix, inxi failed to add in md raid partition size data to HDD used data. The hdd used still fails to properly calculate the actual raid sizes but that's a bit too tricky to do easily so will leave that for some other time. Also added in more hdd used partition types for bsds, wd and ad type drivers for disks. ----------------------------------- -- Harald Hope - Wed, 27 Feb 2013 23:13:00 -0800 ===================================================================================== Version: 1.8.41 Patch Version: 00 Script Date: February 27 2013 ----------------------------------- Changes: ----------------------------------- small change, new tarball, added some excludes items to unmounted list, scd, dvdrw, cdrw. ----------------------------------- -- Harald Hope - Wed, 27 Feb 2013 22:26:32 -0800 ===================================================================================== Version: 1.8.41 Patch Version: 00 Script Date: February 27 2013 ----------------------------------- Changes: ----------------------------------- New version, updated man page. A bug fix for an old time bug: with mdraid, -o (unmounted partitions) would show components of the md raid array as unmounted partitions. This is of course incorrect, and is now fixed. Small update of man page as well to note that -o will not show components of mdraid arrays. ----------------------------------- -- Harald Hope - Wed, 27 Feb 2013 22:09:32 -0800 ===================================================================================== Version: 1.8.40 Patch Version: 00 Script Date: February 27 2013 ----------------------------------- Changes: ----------------------------------- New version, bug fix for mdraid, and cleaned up some errors and weak spots in component output for mdraid. Certain conditions would trigger a false return for raid components, now it shows more explicitly the online/spare/failed data so it's clear. Also shows 'none' for online if none are detected. ----------------------------------- -- Harald Hope - Wed, 27 Feb 2013 14:00:46 -0800 ===================================================================================== Version: 1.8.39 Patch Version: 00 Script Date: February 27 2013 ----------------------------------- Changes: ----------------------------------- New version, updated man page. Completed zfs raid support for bsds, now include component status as with mdraid, will show offline/failed devices as well in standard output. Updated help and man page to reflect the difference between -R, -Rx, and -Rxx output for zfs / mdraid. No linux inxi changes, this should not alter any behaviors in -R for mdraid, if it does, it's a bug, please report it. ----------------------------------- -- Harald Hope - Wed, 27 Feb 2013 12:42:02 -0800 ===================================================================================== Version: 1.8.38 Patch Version: 00 Script Date: February 18 2013 ----------------------------------- Changes: ----------------------------------- New version, updated man page, new tarball. Fixed partition bug that could falsely identify a remote filesystem like nfs as /dev fs Added two options: -! 31 - Turns off Host section of System line. This is useful if you want to post output from server without posting its name. -! 32 - Turns on Host section if it has been disabled by user configuration file B_SHOW_HOST='false' Added missing CPU data message, fixed missing cpu cache/bogomips output, turned off bogomips if null for bsd systems because bogomips is a linux kernel feature. Added N/A for no memory report, this would mainly hit bsd systems where user has no permissions to use sysctl or has no read rights for /var/run/dmesg.boot. Many fixes for partitions, now for bsd, if available, uses gpart list to get uuid/label Added support for raid file system syntax in bsd, now excludes main raid device name, and adds a flag to raiddevice/partitionname type so output can identify it as a raid slice/partition. In man page, added -! 31 / -! 32 sections, and some other small edits. Added bsd raid line error message, added bsd sensors line error message. Many other small bug fixes that should make linux more robust in terms of missing data, and better/cleaner output for bsd. ----------------------------------- -- Harald Hope - Mon, 18 Feb 2013 12:24:39 -0800 ===================================================================================== Version: 1.8.37 Patch Version: 00 Script Date: February 11 2013 ----------------------------------- Changes: ----------------------------------- New tarball. Tiny fix for an obscure fringe case, leaving numbering as is. In some cases, dmidecode returns the grammatically wrong message: 'No smbios nor dmi data' instead of 'No smbios or dmi data', corrected the search to look for simpler: 'no smbios ' to avoid that random error. ----------------------------------- -- Harald Hope - Tue, 12 Feb 2013 09:54:51 -0800 ===================================================================================== Version: 1.8.37 Patch Version: 00 Script Date: February 11 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. This update fixes a recent bug report with ancient dmidecode versions, that do not properly support the -s option. Now -M uses only one method for dmidecode, manual construction of the Machine data from the raw dmidecode file. The file output is also parsed a bit to make it more consistently reliable for inxi purposes. This update also includes all recent bsd branch updates, including the new #!/usr/bin/env bash on top which lets inxi run in any environment without changes. Also for bsd, sets sed -i/sed -i '' global value, which means that now all the branches are the same, except the bsd branches will contain the most recent tests and bsd handling. As each step is reached, I'll release a new inxi that should be stable, this is the first one however that can be used as is, no changes, for bsd, debian kfreebsd, and linux systems. Pleasen note that most bsd features are either incomplete or missing completely at this point, but it's a start. Some initial changes as well to help options to show more correct linux or bsd terms. These will be updated as time permits, it is a long process. ----------------------------------- -- Harald Hope - Mon, 11 Feb 2013 20:55:49 -0800 ===================================================================================== Version: 1.8.36 Patch Version: 00 Script Date: February 8 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Cleaned up patch number sed cleanup that didn't work in bsd. ----------------------------------- -- Harald Hope - Fri, 08 Feb 2013 20:50:23 -0800 ===================================================================================== Version: 1.8.36 Patch Version: 00 Script Date: February 8 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. All bug fixes and cleanup preparing to support bsd systems, including kfreebsd from Debian. Cleaned up all sed and grep that will be used by bsds, added more granular flag for bsd types. Cleaned up and corrected issues between bsd/linux, more escapes and tests added to drop error counts in bsds. Please note that you must use the inxi from branches/bsd for true bsds because sed has extra -i '' added, and has the proper #!/usr/local/bin/bash Added -! 16 for gnubsd download/update, that's for gnu bsd systems like gnu/kfreebsd from debian. That retains the top #!/bin/bash path, and also uses gnu sed so no -i '' syntax. Moved some grep -o to gawk or sed to avoid using gnu grep unnecessarily, leaving gnu grep where it will be linux only, for example parsing a /proc file. Fixed tty irc bugs for bsds and linux, now should show the right console size for both, ideally. ----------------------------------- -- Harald Hope - Fri, 08 Feb 2013 20:36:02 -0800 ===================================================================================== Version: 1.8.35 Patch Version: 00 Script Date: February 7 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Note, this is a refactor release only, and features the core bsd support built in, although inxi will not run in bsd unless the top: #!/bin/bash is changed to #!/usr/local/bin/bash The actual bsd branch can be grabbed from: http://inxi.googlecode.com/svn/branches/bsd/inxi then you can keep that version updated using: inxi -! 15 which will grab the latest bsd version from the svn server. This release also fixes a lot of small bugs that testing for bsd support exposed, but functionally most people should see no difference, I just want to get this version up because there are so many small changes that it's worth having a release. I was going to have the fixed dmidecode for old systems in 1.8.35 but that will have to wait til 1.8.36 Linux users should see no real changes, except maybe a thing or two will work in certain circumstances when it didn't before, like showing MHz on ARM cpus on short inxi. ----------------------------------- -- Harald Hope - Thu, 07 Feb 2013 19:56:19 -0800 ===================================================================================== Version: 1.8.34 Patch Version: 00 Script Date: January 28 2013 ----------------------------------- Changes: ----------------------------------- new version, new tarball, new man page. small change -Ixx will show running in tty if it's not in X, with tty number. sort of redundant to System: console: data, but that's ok, we'll live for now. ----------------------------------- -- Harald Hope - Mon, 28 Jan 2013 16:12:45 -0800 ===================================================================================== Version: 1.8.33 Patch Version: 00 Script Date: January 28 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball, new man page. Fixed an old bug where if you start inxi with an ssh command sometimes it will not show any client information, just the debugger PPID output. Now it will test as a final check to see if it can detect any parent to the process. Actually grandparent I believe. Seems to work, it's a fringe case but why not handle it? New -xx feature, for -I it will show, if inxi is not running in IRC client and if is running in X, and if the grandparent is not 'login', will show the application the shell is running in. Example: Info: Processes: 271 Uptime: 5:36 Memory: 3255.8/4048.5MB Runlevel: 3 Gcc sys: 4.7.2 alt: 4.0/4.2/4.4/4.5/4.6 Client: Shell (bash 4.2.37 - started in konsole) inxi: 1.8.33 ----------------------------------- -- Harald Hope - Mon, 28 Jan 2013 15:57:15 -0800 ===================================================================================== Version: 1.8.32 Patch Version: 00 Script Date: January 23 2013 ----------------------------------- Changes: ----------------------------------- Small changes to man page, updated copyright date, added a patch contributor. ----------------------------------- -- Harald Hope - Sat, 26 Jan 2013 18:48:37 -0800 ===================================================================================== Version: 1.8.32 Patch Version: 00 Script Date: January 23 2013 ----------------------------------- Changes: ----------------------------------- No version change. New tarball, updated man page. Some lintian changes for man page, escaped required -x type to \-x ----------------------------------- -- Harald Hope - Sat, 26 Jan 2013 18:39:03 -0800 ===================================================================================== Version: 1.8.32 Patch Version: 00 Script Date: January 23 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Disabled -U in irc clients, with an exit error message. ----------------------------------- -- Harald Hope - Wed, 23 Jan 2013 14:45:38 -0800 ===================================================================================== Version: 1.8.31 Patch Version: 00 Script Date: January 23 2013 ----------------------------------- Changes: ----------------------------------- New version, new tarball. Fixed overly verbose output for --version/-V in irc. Also updated and made cleaner the version data in verbose mode, non irc. Fixed instance where program location would only show a dot . or relative path to inxi. Now in version full will show the full path, or should. Basic version line now show: inxi 1.8.30-00 (January 22 2013) The verbose information/version shows the license information, website/irc support info, and a few other changes. Also fixed a small bug where the copyright shows current year, not the actual year of the inxi copyright contained in the top comment header. ----------------------------------- -- Harald Hope - Wed, 23 Jan 2013 13:55:35 -0800 ===================================================================================== Version: 1.8.30 Patch Version: 00 Script Date: January 22 2013 ----------------------------------- Changes: ----------------------------------- Changing compression of inxi.1.gz to gzip -9 to fit lintian tests. This won't matter to anyone at this point so no need to change anything. ----------------------------------- -- Harald Hope - Tue, 22 Jan 2013 19:27:54 -0800 ===================================================================================== Version: 1.8.30 Patch Version: 00 Script Date: January 22 2013 ----------------------------------- Changes: ----------------------------------- New Version, new tarball. Added inxi.changelog to tarball as well. Continuing fixes for ARM cpus, it was noted that short form inxi failed to show cpu speed derived from bogomips. That's because of the old min/max output that short form used. Updated that section to now use N/A as flag, and if N/A for min/max speed, use the speed given from first cpu array index, the one derived from bogomips for ARM/razberry pi. Note that there is still no other ARM /proc/cpuinfo available to see if the razberry pi fixes work for all ARM cpus, but the fixes will stop hangs and endless loops at worst, and may also show some type of cpu speeds for ARM cpus that are not in razpi devices. ----------------------------------- -- Harald Hope - Tue, 22 Jan 2013 12:38:47 -0800 ==================================================================================== Script Version: 1.8.29 Patch Version: 00 Script Date: January 21 2012 ----------------------------------- Changes: ----------------------------------- Bug fix, new version, new tarball. quick work around fix for razberrie pi, get cpu data hung on arm /proc/cpuinfo because it doesn't use the standard processor : [digit] format, but uses a string in the processor : field, which then hangs inxi which was expecting an integer. Corrected this with a work around, but it will require a lot more ARM /proc/cpuinfo samples before the support for ARM can be considered stable. For cpu speed, following wikipedia, used bogomips being equal to 1x cpu speed, to derive cpu speed. Better than nothing I guess, but will be wrong in other cases, particularly with dual core arm. ----------------------------------- -- Harald Hope - Mon, 21 Jan 2013 16:24:40 -0800