Bugs:
1. If you consider failure to identify a mounted yet hidden partition a bug, then
that bug is fixed, but I consider that as more of a fix than a bug.
Fixes:
1. Added more device pattern ID for odroid C1 and C2, these are now pretty well
supported.
2. inxi failed to handle a certain type of hidden partition, so far only seen
with udiskctl mounted TimeShift partitions, but this may be a more general udisk
issue, but so far not enough information. The fix is to use the lsblk data to
build up missing partitions, so this fix is for non legacy Linux systems only.
The fix works pretty well, but it's hard to know until we get a lot more real
world data, but given so far I've received only one issue report on it, I
suspect this is not a common situation, but you never know, it would never
have shown up in datasets unless I had looked specifically for it, so it may
be more common than I think.
3. Cleaned up and simplified new --admin -p and -d logic.
Enhancements:
1. For debugging, renamed all user debugger switches to have prefix --debug.
These options are to help debug debugger failures, and so far have been tested
and solved the failures, so I'm adding them all to the main man and help menu,
thus raising them to the level of supported tools. These were enormously helpful
in solving proc or sys debugger hangs.
* --debug-proc
* --debug-proc-print
* --debug-no-sys
* --debug-sys
* --debug-sys-print
2. Added findmnt output to debugger, that may be useful in the future. Also added
df -kTPa to also catch hidden partitions in debugger.
3. Added in another user level debugger, triggered with --debug-test-1 flag. This
will do whatever operation is needed at the time for that user. Some issues can
only be resolved by the user on their machine.
4. More disk vendors and matches!!! Thanks linuxlite/linux hardware database!
Bugs:
1. There was a missing main::is_int test that in some instances triggered
error. This is corrected.
2. More of a fix, but legacy devices were not matching NIC to IF because
the /sys path was not a link as it is now. I made a separate function to
handle that match test so it could be more readily be worked with.
Fixes:
1. Arch/Manjaro presented yet another Xorg.wrapper path, this time /usr/lib. Why?
who knows. That to me is a bug, but since if it's not handled in inxi, it makes
it look like inxi has a server: -G bug, I worked around it. Again. This creates
the bug when you do not use the actual true path of Xorg where Xorg.wrapper
complains and will not show -version data. Why move this? why use that wrapper
thing? I don't know, makes no sense to me.
2. More MIPS data, thanks manjaro ARM people. This made MIPS much better, though
it will certainly need more work.
3. Better ARM support, added in devicetree strings, which helps pad out the
Devices IDs, albeit with very little data, but at least the devices are detected.
Thanks Manjaro ARM people there again.
4. Removed Upstart init test for arm/mips/sparc devices. This test made MIPS
device totally puke and die, killed networking, so since very few upstart running
systems will be arm/mips devices, I decided there better safe than sorry.
5. Found another uptime syntax case, MIPS as root does not have the users item.
6. Many tweaks to SOC data generators, will catch more categories, but the lists
will never be done since each device can be, and often is, random re the syntax.
7. USB networking failed to test usb type for 'network', which led to failed
ids on some device strings. SOC types are now filtered through a function
to create consistent device type strings for the per device tool to use to
assign each to its proper @device_<type> array.
8. For pciconf/FreeBSD, cleaned up device class strings to get rid of 0x and
trailing subsubclass values, this converts it into the same hex 4 item string
that is used by GNU/Linux/lspci so I can apply consistent rules to all pci
types, no matter what the generator source is, lspci, pcidump, pciconf, and
eventually pcictl if I can get netbsd running.
9. Fixed internal --dbg counts for various features, and updated docs for that.
10. Fixed ARM / MIPS missing data messages, they were redundant.
11. Ongoing, moving excessive source comments to inxi-values.txt and inxi-data.txt.
12. Added unity-system-compositor as mir detection, who knew? I guess that was
its production application name all along? Oh well.
Enhancements:
1. Added basic support for OpenIndiana/Solaris/SunOS as a bsd type. Just enough
to make errors not happen.-repos
2. future proofed unix/bsd detections just to avoid the unset $bsd_type of non
BSD unix.
3. Added S6 init system to init tool.
4. Added OpenBSD pcidump to new DeviceData feature. Includes now <root required>
message on Device-x: lines if not root. All working.
5. Fully refactored the old pci stuff to DeviceData package/class, due to adding
so many types to that, it made sense to make it a single class.
6. Did the same to USBData, because of lsusb, usbdevs, and /sys usb, made sense
to integrate the data grabber into one package/class
7. Added speed: item to USB:, it shows in Mb/s or Gb/s
8. Added Odroid C1/C2 handling, which is one big reason I opted to refactor the
devices data logic into DeviceData.
9. Added ash shell, not sure if that detection will work, but if it does, it will
show.
10. As part of the overall DeviceData refactor, I moved all per type data into
dedicated arrays, like @device_graphics, @device_audio, @device_network, etc,
which lets me totally dump all the per device item tests, and just check the
arrays, which have already been tested for on the construction of the primary
DeviceData set. Moved all per type detections into DeviceData so that is now
one complete logic block, and the per type data generators don't need to know
about any of that logic at all anymore.
11. Added sway, swaybar, way-cooler as window managers, info items. Not 100%
positive about the --version, their docs weren't very consistent, but I think
the guess should be right if their docs weren't incorrect.
12. Added vendor: item to network, not sure why I kept that off when I added
vendor: to audio and graphics. It made sense at the time, but not now, so now
-GNA all have vendor: if detected.
13. More device vendors!! The list never ends. Thanks linuxlite/linux hardware
database, somehow you have users that manage to use every obscure usb/ssd/hdd
known to humanity.
14. Big update to --admin, now has the following:
A: partitions: shows 'raw size: ' of partition, this lets users see the amount
of file system overhead, along with the available size as usual.
B: partitions: show percent of raw in size:
C: partitions: show if root, block size of partition file system. Uses
blockdev --getbsz <part>
D: partition: swap: show swappiness and vfs cache pressure, with (default)
or (default <default value) added. This apparently can help debugging some
kernel issues etc. Whatever, I'll take someone's word for that.
E: Disks: show block size: logical: physical:
15. New option and configuration item: --partition-sort / PARTITION_SORT
This lets users change default mount point sort order to any available ordering
in the partition item. Man page and help menu show options.
16. Going along with the MIPS fixes, added basic support for OpenWRT, which uses
an immensely stripped down busybox (no ps aux, for example), maybe because it
only runs as root user/ not sure, anyway, took many fixes.
Changes:
1. Changed usb: 1.1 to rev: 1.1 because for linux, we have the USB revision number,
like 3.1. Note that this is going to be wrong for BSDs, but that's fine.
2. Changed slightly the output of Memory item, now it follows the following rules:
A: if -m/--memory is triggered (> -v4, or -m) Memory line always shows in Memory:
item, which makes sense. Note that -m overrides all other options of where Memory
minireport could be located.
B: if -tm is triggered, and -I is not triggered, Memory shows in in -tm
C: if -I is triggered, and -m is not triggered, Memory: shows in -I line.
D: no change in short form inxi no arg output, Memory is there.
Bugs:
1. Big bug found on certain systems, they use non system memory memory arrays, inxi
failed to anticipate that situation, and would exit with error when run as root for
-m when it hit those array types. These arrays did not have modules listed, so the
module array was undefined, which caused the failure. Thanks Manjaro anonymous
debugger dataset 'loki' for finding this failure.
This is literally the first dataset I've seen that had this issue, but who knows
how many other system boards will show something like that as well.
Fixes:
1. Related to bug 1, do not show the max module size item if not system memory
and size is less than 10 MiB. Assuming there that it's one of these odd boards.
Enhancements:
1. For bug 1, extended Memory: report to include array type if not system memory.
That instance had Video Memory, Flash Memory, and Cache Memory arrays along with
the regular System Memory array. Now shows: use: Video Memory for example if not
System Memory to make it clear what is going on.
2. Added basic Parrot system base, but for some inexplicable reason, Parrot changed
the /etc/debian_version file to show 'stable' instead of the release number. Why?
Who knows, it would be so much easier if people making these derived distros would
be consistent and not change things for no good reason.
3. Added a few more pattern matches to existing vendors for disks. As usual, thanks
linuxlite/linux hardware database for the endless lists of disk data.
4. Added internal dmidecode debugger switches, that makes it much easier to inject
test dmidecode data from text files using debugger switches internally.
5. Added -Cxx item, which will run if root and -C are used, now grabs L1 and L3
cache data from dmidecode and shows it. I didn't realize that data was there, not
sure how I'd missed it all these years, I guess pinxi really is much easier to work
on! This only runs if user has dmidecode permissions from root or sudo.
Thanks:
1. AntiX forums, for testing -C --admin, suggestions, always helpful.
Bugs:
1. Added switch to set @ps_gui, I forgot case where info block was only thing
that used ps_gui (Nitrux kde nomad latte case). This led to no info: data if
other ps_gui switches not activated. Now each block that can use it activates it.
Fixes:
1. To clarify issue #161 added help/man explanation on how to get colors in cases
where you want to preserve colors for piped or redirected output. Thanks fugo.
2. LMDE 3.0 released, slightly different system base handling, so refactored to
add Debian version, see enhancement 2. Tested on some old vm instances, improved
old system Debian system base id, but it's empirical, distro by distro, there is
no rule I can use to automatically do it, sadly.
3. 'Motherboard' sensors field name added, a few small tweaks to sensors. This
was in response to issue #159, which also raised a problem I was not really
aware of, user generated sensor config files, that can have totally random
field names. Longer term solution, start getting data from sys to pad out
lm-sensors data, or to handle cases where no lm-sensors installed.
4. Fixed kwin_11 and kwin_wayland compositor print names, I'd left out the _,
which made it look strange, like there were two compositors or something.
5. Fixed latte-dock ID, I thought the program name when running was latte, not
latte-dock. inxi checks for both now. Thanks Nitrux for exposing that in vm test.
6. Sensors: added in a small filter to motherboard temp, avoid values that are
too high, like SYSTIN: 118 C, filters out to only use < 90 C. Very unlikely a
mobo would be more than 90C unless it's a mistake or about to melt. This may
correct anoymous debugger dataset report from rakasunka.
Enhancements:
1. Added --admin to -v 8 and to --debugger 2x
2. Expanded system base to use Debian version tool, like the ubuntu one, that
lets me match version number to codename. The ubuntu one matches code names to
release dates. Added Neptune, PureOS, Sparky, Tails, to new Debian system base
handler.
3. Big enhancement: --admin -C now shows a nice report on cpu vulnerabilities,
and has a good error message if no data found. Report shows:
Vulnerabilities: Type: [e.g. meltdown] status/mitigation: text explanation.
Note: 'status' is for when no mitigation, either not applicable, or is vulnerable.
'mitigation' is when it's handled, and how. Thanks issue #160 Vascom from Fedora
for that request.
4. The never-ending saga of disk vendor IDs continues. More obscure vendors,
more matches to existing vendors. Thanks linuxlite/linux hardware database
Changes:
1. Reordered usb output, I don't know why I had Hubs and Devices use different
ordering and different -x switch priorities, that was silly, and made it hard to
read.
Now shows:
Device/Hub: bus-id-port-id[.port-id]:device-id info: [product info]
type/ports: [devices/hubs] usb: [type, speed]
-x adds drivers for devices, and usb: speed is now default for devices, same as
Hubs. Why I had those different is beyond me.
The USB ordering is now more sensible, the various components of each
matching whether hub or device.
Unfixable or Won't Fix:
1. Unable to detect Nomad desktop. As far as I can tell, Nomad is only a theme
applied to KDE Plasma, there is no program by that name detectable, only a
reference in ps aux to a theme called nomad.
2. Nitrux system base ID will not work until they correct their /etc/os-release file.
3. Tails live cd for some inexplicable reason uses non standard /etc/os-release
field names, which forces me to either do a custom detection just for them, or for
them to fix this bug. I opted for ignoring it, if I let each distro break standard
formats then try to work around it, the distro ID will grow to be a 1000 lines long
easily. Will file distro bug reports when I find these from now on.
Samples:
This shows the corrected, cleaned up, consistent usb output:
inxi -y80 --usb
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0
Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1
Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk)
type: Audio,HID usb: 1.1
Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse usb: 1.1
Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse usb: 1.1
Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific>
usb: 2.0
Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network usb: 2.0
Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1
Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0
Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0
inxi -y80 --usb -xxxz
USB:
Hub: 1-0:1 info: Full speed (or root) Hub ports: 14 usb: 2.0
chip ID: 1d6b:0002
Hub: 1-3:2 info: Atmel 4-Port Hub ports: 4 usb: 1.1 chip ID: 03eb:0902
Device-1: 1-3.2:4 info: C-Media Audio Adapter (Planet UP-100 Genius G-Talk)
type: Audio,HID driver: cm109,snd-usb-audio interfaces: 4 usb: 1.1
chip ID: 0d8c:000e
Device-2: 1-4:3 info: Wacom Graphire 2 4x5 type: Mouse driver: usbhid,wacom
interfaces: 1 usb: 1.1 chip ID: 056a:0011
Device-3: 1-10:5 info: Tangtop HID Keyboard type: Keyboard,Mouse
driver: hid-generic,usbhid interfaces: 2 usb: 1.1 chip ID: 0d3d:0001
Device-4: 1-13:7 info: Canon CanoScan LiDE 110 type: <vendor specific>
driver: N/A interfaces: 1 usb: 2.0 chip ID: 04a9:1909
Device-5: 1-14:8 info: Apple Ethernet Adapter [A1277] type: Network
driver: asix interfaces: 1 usb: 2.0 chip ID: 05ac:1402 serial: <filter>
Hub: 2-0:1 info: Full speed (or root) Hub ports: 8 usb: 3.1
chip ID: 1d6b:0003
Hub: 3-0:1 info: Full speed (or root) Hub ports: 2 usb: 2.0
chip ID: 1d6b:0002
Hub: 4-0:1 info: Full speed (or root) Hub ports: 2 usb: 3.1
chip ID: 1d6b:0003
Hub: 5-0:1 info: Full speed (or root) Hub ports: 4 usb: 2.0
chip ID: 1d6b:0002
Hub: 6-0:1 info: Full speed (or root) Hub ports: 4 usb: 3.0
chip ID: 1d6b:0003
Bugs:
1. A long standing bug was finally identified and fixed. -n/-i would fail to match
a Device to the right IF in cases where they had the same chip / vendor IDs. Added
busID for non Soc type devices to fix that. I hope. This fix has been tested on a
machine that had this bug, and it is now corrected. Thanks skynet for the dataset.
2. deepin-wm was failing to get listed correctly with new fixes, this is corrected.
Fixes:
1. mate version was depending on two tools, mate-about and mate-session, which
somewhat randomly vary in which has the actual highest version number. Fix was to
run both in MATE for version, and run those through a new version compare tool.
Thanks mint/gm10 for reporting that bug.
2. -Gxx compositors: added some missing ones that were being checked for in-
correctly.
3. For distro id, fixed a glitch in the parser for files, now correctly removes
empty () with or without spaces in it.
4. Got rid of ' SOC?' part of no data for ram or slots, that also triggers in non
SOC cases, so best to not guess if I can't get it right.
Enhancements:
1. More disk vendor ID matches, also, somehow missed QEMU as vendor, thanks to
linux hardware database (linuxlite) for great samples of vendor/product strings.
2. Added a bunch of compositors, found a new source that listed a lot inxi did not
have already.
3. Added version v: for some compositors in -Gxxx.
4. New program_data() tool provides an easier to use simple program version/print
name generator, including extra level tests, to get rid of some code that repeats.
5. Found some useful QEMU virtual machines for ARM, MIPS, PPC, and SPARC, so
made initial debugging for each type, so basic working error free support is well
on its way for all 4 architectures, which was unexpected. More fine tunings to
all of them to avoid bugs, and to catch more devices, as well.
Note that QEMU images are hard to make, and they were not complete in terms of
what you would see on physical hardware, so I don't know what features will work
or not work, there may be further variants in audio/network/graphics IDs that
remain unhandled, new datasets always welcome for such platforms!
6. Found yet another desktop! Added Manokwari support, which is at this point
a reworking of gnome, but it was identifiable, minus a version number.
7. Added deepin and blankon to system base supported list, these hide their debian
roots, so I had to use the manual method to provide system base.
Bugs:
1. A result of the issue #156 USB refactor, I discovered that the --usb sort order,
which was based on Bus+DeviceID, in fact is wrong, pure and simple. This was exposed
by using a second USB hub on a bus, the Device IDs are not really related in any
clearly logical way to the actual position on the bus. The solution was to fully
refactor the entire USB logic and then use generated alpha sorters based on the full
bus-port[.port] ID. Device ID is now printed last in the ID string, like so: 1-4:1.
Note that Device IDs start at 1 for each bus, regardless of how many hubs you have
attached to that port.
2. Certain situations triggered a bug in Optical devices, I'd forgotten to change
$_ to $key in two places. Since that part didn't normally get triggered, I'd never
noticed that bug before. Thanks TinyCore for exposing that glitch!
Fixes:
1. On legacy systems, fluxbox --version does not work, -v does. Corrected.
2. for --usb, network devices should now show the correct 'type: Network'.
For some weird reason, the people who made the usb types didn't seem to consider
many key devices, scanners, wifi/ethernet adapters, and those are almost always
"Vendor defined class".
3. A really big fix, for instances where system is using only Busybox, like
TinyCore, or booting into any system running busybox for whatever reason, now
avoids the various errors when using busybox ps, which only for example outputs
3, not 11, default columns for ps aux, and which does not support ps -j, which
is used in the start/shell client information. This gets rid of a huge spray
of errors, and actually allows for pretty complete output from systems that only
have busybox tools installed. This should cover everything from TinyCore to MIPS
to ARM systems that run minimalist Linux. Note that this fix goes along with the
/sys based USB parser, since such systems may have USB, but are unlikely to have
lsusb installed, but do have /sys USB data.
4. In some cases, strings /sbin/init would trigger a false version result, fixed
that logic so now it rarely will do that.
Enhancements:
1. Added Mosksha desktop, that's a Bodhi fork of Enlightenment E17; added qtile
window manager (no version info).
2. Added Bodhi detection; Salix + base slackware; kde neon system base;
3. Added support for slaptget repos, basic, it may not be perfecct.
4. More disk vendors, and matches for existing vendors.
5. Full rewrite of USB data, in --usb, -A, and -N, along with core usb data engines.
This makes lsusb optional, though recommended (because it has a better vendor/
product ID to string internal database) than /sys data. This was in response
to a second set of issues in #156 by gm10, USB drivers.
Depending on the system, using only /sys data, while slightly less informative,
is between 20 and 2000 milliseconds faster, so if you want speed, either use the
new --usb-sys option, or the configuration file USB_SYS=[true|false] option.
1. switched to cleaner more efficient data structures
2. added ports count to hub report, linux and bsd.
3. added [--usb|-A|-N] -xxx serial for Device items, if present.
4. added --usb -xx drivers, per interface, can be 1 or more drivers.
5. fully refactored -A and -N usb device logic, far cleaner and simple now,
much easier to work with, no more hacks to find things and match them.
6. USB type: now comes from /sys, and is in general going to be more accurate
than the lsusb -v based method, which was always an ugly and incomplete hack.
As with drivers, it also now lists all the interface types found per device, not
just the first one as with the previous method. Note that HID means the more
verbose: Human Interface Device, but I shortened it. Now that the type: data is
created by inxi reading the class/subclass/protocal IDs, and then figuring out
what to do itself, I can have quite a bit more flexibility in terms of how type
is generated.
7. added --usb -xxx interfaces: [count] for devices, which lists the device
interface count. This can be useful to determine if say, a usb/keyboard adapter
is a 2 interface device. Note that Audio devices generally have many interfaces,
since they do more than 1 thing (audio output, microphone input, etc.).
8. Support for user configuration file item: USB_SYS=[true|false]. This is useful
if you want to see only the /sys version of the data, or if you want the significant
speed boost not using lsusb offers, particularly on older systems with a complex
USB setup, many buses, many devices, etc.
New option --usb-tool overrides USB_SYS value, and forces lsusb use.
9. New options: --usb-sys - forces all usb items to use /sys data, and skip lsusb.
Note that you still have to use the feature options, like --usb, -A, or -N. This
can lead to a significant improvement in execution time for inxi.
10. Rather than the previous bus:device ID string, to go along with the internal
sorting strings used, inxi now shows the real Bus / port /port ids, like:
1-3.2.1:3 - Bus-Port[.port]:device id.
6. Added support for Xvesa display server. Thanks for exposing that one, TinyCore!
7. Added tce package manager to repos. That's the tinycore package manager.
Changes:
1. big one, after 10 plus years, the venerable 'Card-x:' for -A,-N, and -G has been
replaced by the more neutral 'Device-x:'. This was a suggestion by gm10 from Mint
in issue #156
This makes sense because for a long time, most of these devices are not cards, they
are SOC, motherboard builtin, USB devices, etc, so the one thing they all are are
some form of a device, and the one thing that they are all not is a Card. Along with
the recent change from HDD: to Local Storage in Disks: this brings inxi terminology
out of the ancient times and into the present. Thanks for the nudge gm10.
Removed:
See inxi-perl/docs/inxi-fragments.txt for removed blocks.
1. Entire parser for lsusb -v, now it all runs either usbdevs or lsusb, and if Linux
and not lsusb, it will use /sys exclusively, otherwise it uses /sys data to complete
the lsusb vendor/product strings.
2. Two functions that were used by -A and -N to match usb devices and get their /sys data,
that became redundant since it all now goes through the /sys parser already, so those
features can get the data pre-parsed from the @usb arrays.
Output Examples:
Sort by DeviceID failures in 3.0.20 using Device ID:
inxi --usb
USB:
Hub: 1:1 usb: 2.0 type: Full speed (or root) hub
Device-1: Wacom Graphire 2 4x5 bus ID: 1:2 type: Mouse
Device-2: Tangtop HID Keyboard bus ID: 1:3 type: Keyboard
Device-3: Verbatim bus ID: 1:11 type: Mass Storage
Device-4: Apple Ethernet Adapter [A1277] bus ID: 1:13
type: Vendor Specific Class
Hub: 1:85 usb: 1.1 type: Atmel 4-Port Hub
Device-5: C-Media Audio Adapter (Planet UP-100 Genius G-Talk) bus ID: 1:86
type: Audio
Device-6: Canon CanoScan LiDE 110 bus ID: 1:112
type: Vendor Specific Protocol
Device-7: ALi M5621 High-Speed IDE Controller bus ID: 1:113
type: Mass Storage
Hub: 2:1 usb: 3.1 type: Full speed (or root) hub
Hub: 3:1 usb: 2.0 type: Full speed (or root) hub
Hub: 4:1 usb: 3.1 type: Full speed (or root) hub
Hub: 5:1 usb: 2.0 type: Full speed (or root) hub
Hub: 6:1 usb: 3.0 type: Full speed (or root) hub
Corrected: sort by BusID in 3.0.21:
inxi --usb
USB:
Hub: 1-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 14
Hub: 1-3:85 usb: 1.1 type: Atmel 4-Port Hub ports: 4
Device-1: C-Media Audio Adapter (Planet UP-100 Genius G-Talk)
type: Audio,HID bus ID: 1-3.2:86
Device-2: ALi M5621 High-Speed IDE Controller type: Mass Storage
bus ID: 1-3.4:113
Device-3: Wacom Graphire 2 4x5 type: Mouse bus ID: 1-4:2
Device-4: Verbatim type: Mass Storage bus ID: 1-7:11
Device-5: Tangtop HID Keyboard type: Keyboard,Mouse bus ID: 1-10:3
Device-6: Canon CanoScan LiDE 110 type: <vendor specific> bus ID: 1-13:112
Device-7: Apple Ethernet Adapter [A1277] type: Network bus ID: 1-14:13
Hub: 2-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 8
Hub: 3-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 2
Hub: 4-0:1 usb: 3.1 type: Full speed (or root) Hub ports: 2
Hub: 5-0:1 usb: 2.0 type: Full speed (or root) Hub ports: 4
Hub: 6-0:1 usb: 3.0 type: Full speed (or root) Hub ports: 4
Fixes:
1. Added support for new ARM SOC types, including chromebook ARM. Note that so far I
have been unable to find a way to detect MMC networking, at least in a meaningful
way. I know where the data is, but I can't figure out how to reasonably integrate it
into the main ARM soc/device generator logic because it's fundamentally different
from most platform or devicetree data.
2. Added alternate battery tests, this should cover a wide range of alternate
battery IDs, while still preserving the distinction between system power batteries,
and device batteries. The detection is now far more dynamic, and can handle
unknown syntax for battery ID, while not losing the ability to correctly identify
device batteries (like mice, keyboards, etc).
3. Trying a somewhat unreliable hack to get cpu variant for arm devices where the
current method fails. this may be removed if it causes false ID in the future.
4. Excluded all /driver/ paths from ARM SOC @pci generation, those give read errors
even as root.
5. Fixed a few defective wm version detections.
Enhancements:
The -S line continues to see many improvements.
1. Greatly expanded the set of info: items, now it covers all the toolbars,
panels, and docks that I could find, plus a few things like icewmtray, where the
wm has a built in panel. While there are probably more bar/panel/dock tools out
there, and more will get added if or when they are encountered, now info: shows
far more variants than ever before, and covers the range of options simpler wm
users have for bars, trays, and panels. If I missed one that is detectable, by
all means show how to detect it!
2. Fine tuned and added a few more window managers, and added version for some that
were not showing versions.
3. Added 3 more dm version handlers, slim, gdm, gdm3, and refactored that code to
use the same program_values/program_version logic that the other tools use.
4. A few more obscure and usb stick vendor IDs added.
Fixed some subtle and not subtle issues that I've noticed recently.
Bugs:
1. The color scheme selector failed to remove the global value when a non global
setting was used. This led to global values never getting removed, even though
the text output said it would be, which is confusing, obviously, and always
overriding the color selected. Thanks CentOS for helping find that one.
Fixes:
1. Fixed possible corrupted user inxi.conf values. Now skips null values, and
fully validates as integer integer values.
2. Fixed fvwm-crystal detections, integrated it into new refactored desktop logic.
3. For systems without glxinfo or running inxi out of gui/desktop, Xorg was in many
cases failing to show version, which made it not show anything for server: except
N/A. This is caused by a relatively recent change in behaviors in xorg, where you
have to run it directly from it's true path, which is something like /usr/lib/xorg
or /usr/lib/server-xorg at which point the error:
/usr/lib/xorg-server/Xorg.wrap: Only console users are allowed to run the X server
Figuring this out was tricky, and who the heck knows why Xorg -version would even
return such a silly error in the first place, but there you have it. Next time
you wonder why inxi is so long, this is why, endless churn in basic and complex
things! The fix is injecting the optional xorg paths into @paths right before,
and removing them right after, which avoids adding clutter to the @paths.
4. A ZFS fix, I'd noticed this one a while back, but after looking at the zfs
Ubuntu tutorial page, I realized that this is the norm now, which is building zfs
with /dev/sda (no partitions). This lead to failing to detect the zfs components,
and reporting a bunch of partitions as unmounted which were part of that /dev/sdb
type component array. By allowing /dev/sd[a-z] I fixed both errors at the same time,
but I don't know if this syntax extends to say, nvme zfs as well. Note that when
you build zfs arrays with say, /dev/sdb /dev/sdc you'll see two partitions per
disk, /dev/sdx1 which is the main data, and /dev/sdx2, which is a tiny 8mB partition,
no idea what it's for.
5. Fixed missing konversation and hexchat version numbers in -I, finally found
what was going on there. Note that hexchat --version used to pop up a gui, but
I guess he finally fixed that, I am hoping.
6. Fixed some gentoo repo detections, but also found more variants. Not sure what
exactly is going on with repos there, will wait for gentoo user issue reports to
really lock those down.
7. BSD fixes, turns out FreeBSD uses that same map ... syntax in df -kT as OSX...
Also made sure to load sysctl data for -S row, I'd forgotten about the compiler
test there which needs that data.
8. Fixed herbstluftwm version detection, turns out it's another one of those that
passes the entire path to the version program, so it shows: /sbin/herbsuftwm 0.22.0
which broke the regex, easy fix.
9. Completed refactoring of DesktopData, now it's all data array driven for most
wm, desktops, etc, which makes adding/removing one very easy. All core data is now
in program_values to allow for automated detections.
Enhancements:
1. With fix 1, added check_int and check_number utilities, these validate that inxi
internal numeric or integer values actually are what they are supposed to be. This
uses a neat Perl trick that makse the checks super fast and super accurate. Moved
all internal int/numeric test regex to use these.
2. Added file based version number detection, that was done for Deepin, which uses
/etc/deepin-version for its version number, but it can be used for anything.
3. Added Deepin and deepin window managers, Lumina, added bspwm wm, fixed muffin
detections. Note that lumina has a weird behavior where when run outside of pinxi,
it outputs to stdout, but inside of pinxi, to stderr, who the heck knows how that
happens!
4. Added zorin to supported base: distros.
5. Even more disk vendors added! The list of no-name off brand chinese ssd vendors
appears to be endless! Added some more specific ids to capture unique strings
that can be linked to a vendor.
6. Added /usr/home to default -P paths, that's used instead of /home in the real
world, so why not show it?
7. Because qt detection is possible, I've extended qt toolkit detection, but it's
also not super accurate, but it's far better than gtk tk was, so I'm leaving
that in. I also extended it to more wm/desktops since more are using qt now.
Note: budgie 11 is going to be qt, but there's no way to distinguish between 11 and
gtk 10 without doing a bunch of hacks so I'm leaving that alone.
8. Found a possible distro id source, added /etc/calamares detections to debugger,
I'll see if that shows some consistent patterns before I implement a last fallback
test for distro IDs. It may work.
Removed:
1. Giving up on fake/slow/inaccurate GTK toolkit detections, removed the entire
codeblock and stored in docs/inxi-fragments.txt, but I'm not going to do package
manager type version tests anymore, if we can't get the data directly from a program
or file, it's not going to happen, plus the gtk installed on the system means nothing
in relation to the gtk version used to build the desktop.
Fixes:
1. Removed /dev/zram type data from swap partitions, since that's ram, it's
not a partition, obviously.
2. More alternate IPMI syntax found, that's clearly going to take a while to have
most syntaxes handled.
3. Small lm-sensors adjustment, fringe cases might scramble up hwmon and gpu
temps, this is now handled.
Enhancements:
1. Added disk vendors, udinfo.
2. Exciting! New Architecture: MIPS! First datasets, confirmed working. This led to
more abstracting of the previously ARM specific logic to be for SOC in general.
3. Related to 2, added in fallback busybox cases for partition data without fs.
4. Added window managers, xmonad, ratpoison, 9dm, gala (for Pantheon), notion,
windowlab
5. Added Pantheon desktop detection. Note, unable to find a way to get version
number.
6. IMPI sensors: added in psu fans, dimm temp.
7. New -Cxxx option: cpu boost (aka turbo), state enabled / disabled, only shows
if system has that option.
Changes:
1. Made toolkit for -S be -xx instead of -x, only Trinity/KDE and XFCE have that
data.
Bugs:
1. A real bug, the detection for true path of /dev/root had a mistake in it and
would only have worked in half the cases. This was an easy fix, but a significant
but since it also would lead to the actual root / partition showing in Unmounted.
2. Related to the item Fixes-2, if two USB networking devices were attached,
the second one's bus and chip ID would go on the wrong line of data if -n or -i
option were used. Since that would be the line belonging to the one above,
that obviously was weird and wrong.
3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip.
This broke CPU temp detection and showed way too high cpu temp, so this fix is
fairly important since new kernels may have this new sensors hwmon syntax.
4. Sensors: IPMI alternate syntax found, also case with no data in expected columns,
just N/A, so now the ipmi sensor logic skips all lines with non numeric values in
the values column. This is what it should have done all along, it was trusting
that values would always exist for the field names it looks for.
Fixes:
1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking
showed the no data message even though usb networking was right below it. This is
corrected, and now that only shows if both main and usb networking failed for ARM.
2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is
sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the
apt files but no data since the pattern was looking for start with deb. Added rpm
to pattern, so all distros that use apt running rpms should now 'just work'.
3. Fixed more distro id things, PCLinuxOS should now show its full distro string.
4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found
another case where it collected a vast amount of junk system data from zfs in that
case, just blocked the entire range. I had no idea /proc had so much junk data in it!
5. As noted above, IPMI, yet another alternate syntax for field names. My hope that
IPMI software and sensors will be more logical and consistent than lm-sensors output
is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten,
I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors
differences. So IPMI will be like all sensors stuff, a work in progress, to
be updated with every newly discovered alternate syntax and data set.
Enhancements:
1. Disk vendors, added some, improved pattern detections for others. This feature
is getting better all the time. Thanks linuxlite hw db, easy to scan for missing
vendors in their inxi data.
2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others,
more refactoring of core wm/desktop code.
3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC
I am aware of that uses that tool. Now reports the actual total, and also gpu: for
ram data, so you can tell that the gpu is using part of the total. Again, this comes
from issue #153. Also added that info to man page for -I part.
4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output.
5. Added Trinity support to Desktop section, this had at least two different detection
methods, but since the first just shows KDE original data, only the second one proved
to be Trinity specific. Happily, the full data is available, toolkit, desktop version,
and wm (Twin).
6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and
messy so it's trimmed down substantially, using a series of filters and rules, and
thus it can contain the following: the actual vendor, like Dell, nothing, the
motherboard vendor/product for board based PCI items, or a complete vendor/product
string if it's unique. I couldn't think of a clean field name that meant:
vendor OR vendor + basic product info OR motherboard + board version OR full
product name, including vendor, so in the end, I just used vendor: but it's not
quite the right term, but nothing else seemed to work better. Testers responded
very enthusiastically about this feature so I guess the vendor: name is ok.
Changes:
1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage:
This was part of issue #153 and is a good suggestion because HDD generally was used
to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit
dated. 'Local' is because inxi does not include detected remote storage in the totals.
2. The recent --wm option which forced ps as data source for window manager detection
has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back
to wm ctrl in case the ps test is null, this is better because I have to add the wm
data manually for each one, whereas wmctrl has an unknown set and probably variable
set of wm. Note that I reversed this because I saw several cases where wmctrl was
wrong, and reported a generic source wm instead of the real one. Since most uses are
not going to even be aware of the wm: feature as enhanced with --wm switch, this
should have no impact on users in general. Since the detected wm name needs to be
know to get assigned to wm: and wm version data, I think it will work better to
have the known variants match with the wm data values, then just fallback to
unknown ones that can get fille in over time as we find wm that people actually
use and that you can get version info on and detect.
Removed:
1. Got rid of tests for GTK compiled with version for many desktops, that test
was always wrong because it did not have any necessary relation to the actual
gtk version the desktop was built out of, and it also almost always returned no
data. Since this is an expensive and slow test, and is always going to be wrong
or empty anyway, I've removed it. My tests showed it taking about 300ms or so
to generate no data, heh.
That's the tk: feature in -S. Note I also found that gnome-shell takes
an absurdly long time to give --version info, the slowest of all such things, 300ms
again, just to show version? Someone should fix that, there's no possible reason
why it should take 300 milliseconds to give a simple version string. Note that
this returns tk: to only returning real data, which in this case means only xfce,
kde, and trinity, which are the only desktops that actually report their toolkit
data. I'll probably remove that code in the future unless I can think of some real
use for gtk version elsewhere, but it's just junk data which doesn't even work.
In the future, I will not try to emulate or guess at desktop toolkits, either they
show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste
resources and execution time making bad guesses using inefficient code and logic.
QT desktops like LXQt I'm leaving in because I believe those will tend to track
more closely the QT version on the system, and the tests for QT version aren't
huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but
those may also get removed since they almost never work either. But they are also
slowing down the -Sx process so maybe they should be removed as well, I'll think
about it. Since they only are used on LXQt and razer-qt, it probably isn't a big
deal overall.
Bugs:
1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely
corrected now.
2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui,
so removed that, and now checking lxqt-session for version info instead.
Fixes:
1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between
regular Hitachi and HGST hitachi. Added a few more disk vendors.
2. Distro base and core: added linuxlite, elementary. Some distros use:
/etc/upstream-release/lsb-release so testing for that and os-release now too.
3. Extended qt detections, may catch a few stray ones now in non kde qt
desktops.
4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much
easier to extend each feature and add detections, move order around, etc.
Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves
also totally refactored and optimized. Fixed WindowMaker id, which is made more
annoying because they are the only upper/lower case program name, but in at least
debian, the actual program name is wmaker internally.
Also tightened in particular gnome-shell, which was failing to show due to too
restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop
name in the string, gnome-shell does, only one I'm aware of.
5. Removed N/A from wmctrl output, which just means null, which is what we want.
6. Removed gnome-shell from info: since it will now appear in wm: if found. Added
a few -panel items to info:
Enhancements:
1. Showing type: network bridge for -N when it's type 0680, which is an odd pci
type, generally it's a network bridge, but I figured it's best to show that
explicitly to avoid confusion. This extends the 'type:' from just USB.
2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm,
this was wrong, it's its own thing), a few others.
3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable,
but added some more obscure ones too. This feature requires more work.
4. Extended ARM syntax to support a new one, path to /sys/device... has an extra
/soc/ in it, that is now handled, all are tested for. Confirmed working. Note that
ARM has to be confirmed fixed on a device by device basis, since there are key
syntax differences in the paths, but it will get easier the more variants that are
discovered. Added another trimmer to cut off \x00|01|02|03 special non printing
characters which show as weird jibbberish in output, for model/serial number.
5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that
is tested against, not the entire ps_cmd array. This drops the possible tests down
massively since the only things in ps_gui will be the actual stuff found that matches
all the patterns required for that system, not all ps items. Added marco, muffin
fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which
then allows to get version too.
5. -Sxxx now shows wm: version as well, which can be of use now and then.
6. --wm added to trip force using of ps data for wm, this can be useful because
I don't know all variants of wmctrl output, so that makes it easier to test.
7. Added finally support for --debug 3, which now shows timers, functions, and args
printed to screen.
8. Added qmake --version to fallback qt detection.
Bugs:
1. Finally tracked down and solved the Xorg drivers bug which was caused by
Xorg checking its list of defaults 2 times, not 1, which resulted in failed
status on second try since it was already loaded. Secondary bug was found that
resulted in failing to show the failed, and only showing unloaded, which was also
wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on
that one.
2. Small bug in Openbox version detection, typo.
3. fixed a small glitch in the dm: detection that on systems where /var/run
exists but is not linked to /run, the dm would fail to get detected.
Fixes:
1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's
better to not show any version, since xfcie could one day be 5.
2. Fixed Blackbox fallback detection, there were cases where Blackpox not found
in xprop -root, now it falls back to ps aux detection.
3. For wm: tested all known variants, added support for things like Mutter (Marco)
syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some
glitches, but it's actually Openbox. If run as root, it will show openbox correctly,
otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there.
4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad
that at almost 2020 we are still stumbling around trying to find a consistent way
to identify distros, and derived distros.
5. Added more debugger data collectors in the logging, some data was not
being tracked well during log process which made debugging harder.
Enhancements:
1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that
Xorg auto checks but which are not installed. Those were ignored in the past. This
can be useful to see for example that there are other driver install options
available. Thanks gm10 for that suggestion.
2. Tested and added the following explicit handlers for Distros: and base: in
some cases:
grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos,
bunsenlabs, and a few others. These are a pain to add and test, basically I have
to boot a live cd of each one, then test the files and ID methods, but the ID
methods must also be as dynamic as possible because you never know when a distro
is going to change how they use os-release vs issue vs lsb-release vs <name>-release.
I would have tested a few more but their livecds failed to properly run on vbox.
3. Added a few more disk vendor IDs.
4. Added some more programs to debugger data collector for future feature vdpau, but
that needs more data because we don't really know the variants for example for
dual card systems.
5. Man page: changed extra options to use only one option name per list of options
for that feature, each separe item is started as a new paragraph with -
This makes it a bit more consistent and maybe slightly easier to read the man.
Added -Gxx item, updated -Sx item.
The 3.0.13 system base feature had a small bug in the logic that was supposed to
get the version id from codename, the bug made it never work. This is only relevant
for Ubuntu based distros, so if you are on some other base like Debian or Arch, you
can ignore this one, 3.0.13 will work fine.
No other changes, this was mainly for Mint, and other Ubuntu derived distros in
the future.
Bugs:
1. -I line, sometimes running in showed sudo. This is hopefully now corrected.
Fixes:
1. CPU architectures, small reordering based on hopefully more reliable data
source, but these are hard to find conclusively.
2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME
is not being used consistently, too many distros leave out the distro id found
in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME
as a fallback. That reverses how it was, but it will provide better results for
most distros. Distros that did this properly to begin with should see no change.
3. Now that inxi is basically debugged and working, I've removed the output of
'inxi' from the -t lines. It remains for the pinxi branch however so you can
see how many resources pinxi uses to run.
4. ipmi sensors data are proving to be as random as lm-sensors. Added another
alternate syntax for sensors.
5. CPU: found an alternate syntax, again, for IPMI and sensors data, added
support, I hope, for that.
Enhancements:
1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file
system is created, it will only run as user, not root, unless the --proc flag is
used. More programs added to debugger commands.
2. More disk vendor strings added, fine tuning of vendor detections. There is a
tendency in NVMe disk names to put the vendor name in the middle of the string.
That is now handled for a few key vendors.
3. Added basic ARM SOC and server support. This will require more work in the future
because the syntax used varies significantly device to device, but the featuers
are now in place to add that support. Most SBC ARM devices should now at least show
the model and details data in machine data, and some will show -G -A -N data as
well.
4. ARM CPU: added first attempt to show the cpu variant as well as the more
generic ARM data. This shows 1 or more variants, some ARM devices have two different
cpu cores running at different speeds. Odroid for example.
5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases.
Currently only Mint and MX/AntiX supported because each specific distro must be
handled explicitly using empirical file based data tests. I decided against showing
this for rolling release, since really everyone knows that Antergos is made from
Arch Linux, so showing that does not provide much useful information, whereas
showing the Ubuntu version Mint was made from does.
Note that several derived distros are changing how they use os-release, so the
tools had to be revised to be more dynamic, which is a pain, and makes it even
more empirical and less predictable to print what should be trivially easy to
gather distro and derived source data.
If your distro is not in this list and you want the base data to be present, please
supply a --debug 22 dataset so I can check all the files required to make the
detection work. If your distro has changed methods, please note which methods
were used in the past, and which are used now.
6. Added Armbian distro detection, that's tricky. Added Rasbpian detections.
Added improved Antergos, Arco, and maybe Chakra, Arch detections.
7. Big one: Hardware RAID basic support added. Note that each vendor, and
unfortunatley, often each product line, has its own raid status and drive
reporting tools, which makes adding the actual drive/raid/status report part
very time consuming to add. I may only support this if a certain software maker's
raid tools are installed because they are much simpler to parse, but for now,
it only shows the presence of the raid device itself, not disks, raid status, etc.
Bugs:
1. Color selector accepted '' as a value, which it would then write to config
file, creating errors since it's not an integer value.
2. Corrected distro id error for last fallback case, making the distro ID out
of the filename itself, that was missing the assignment to $distro.
3. mmcblk0 was showing up as an unmounted partition, due to failing to filter
mmcblk[0-9] in unmounted.
Fixes:
1. Added missing compositor kwin_wayland to compositor detections
2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which
looks silly, so now it checks to make sure the two values are different before
using the Chassis: type: data.
3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than
start of disk id string, so now it checks the whole string. This seems particularly
common in nvme devices from Toshiba. This is the only vendor I have found that
puts the vendor string later in the device id string.
4. Added protection against unreadable but present /etc/issue. This was caused
by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue
from /var/run/issue, but with 600 permissions, root read only, that is. Note that
this bug has since been fixed (now has the correct 644 permissions), but I figured
better safe than sorry in case anyone else decides that's a good idea in the future.
Now only sends to reader if readable.
5. Related to 4, made reader not exit on failure, now just prints error message and
keeps going.
6. Upped maximum distro string length to 60, from 50. AntiX for example was coming
in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it
is not a big problem having very long distro id strings.
Enhancements:
1. Added basic /proc data parser to debugger. Can't get all the data or files because
it's simply too big, but grabs the basics.
2. Added vcgencmd for some ARM rasberry pi debugging.
3. ARM: add model if not found in /proc/cpuinfo, or if different.
4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching
it early. Tdie will replace k10-temp sensor item temp1.
5. Added --admin extra data option, and first set of extra data, -C, which will
show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less
than or equal to 9), microcode (as hex).
6. Battery: added with -x option, if found, attached battery driven devices, like
wifi keyboard, mouse. If upower is present, will also try to show battery charge
percent for those devices. Note that -B only shows the Device-X items if -x is used,
and will not show anything in -F unless there is a system, not device, battery
present, or if -Fx is used and there is a Device battery detected.
Added upower to recommends.
7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks
show rotation speeds, and it depends on udevadm, so if no rotation found, it shows
nothing.
8. Added explicit Arco Linux and Antergos distro ID support. This requires more
checks, but in theory, both should now show Arco Linux or Antergos instead of default
'Arch Linux' as before, plus extra data if found, like version.
This version is very peaceful, no big changes, just a few fixes and small new
features added.
This version corrects a few small glitches reported by users, and adds basic support
for disk speed report. Note that this is not as accurate as I'd like, it tries, but
there is not a lot of data to be had. Limits of disk speed seems to be, roughly:
1. most speed is reported as max board can do, not max drive can support
2. usually when speed is reported as lower than max board speed, it's correct, but,
as usual, exceptions to this were found during testing.
3. usually if drive is faster than board speed, it reports board speed, but, again,
exceptions to this rule were found during testing.
However, with this said, it's usually more or less right, at least right in terms
of the fastest speed you can expect to get with your board. NVMe was also supported,
that's much more complicated because NVMe has >= 1 lane, and each lane has up and
down data. The reported speed is max in one direction, and is a function of the
PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable
data rate, not the GT/s rate, which is the total transfers per second the unit
supports.
So due to the unreliable nature of the data, this is only a -xx option. There is
also in general no data for USB, and none for mmcblk (sd cards usually).
This feature may be enhanced with a C Perl XS library in the future, we'll see how
that goes.
FIXES:
1. corrected an issue where a networking card of type Bridge failed to be detected.
This is now handled. This was a PCI type I'd never seen before, but it exists, and
a user had it, so now it will work as expected for this type.
2. changed the default units in weather to be m (metric) imperial (i). While this is
not very intuitive for me, it's easier to explain I think. The previous c / f
syntax is supported internally, and inxi will just translate c to m and f to i, so
it doesn't matter which is or was used on a config file or with the --weather-unit
option.
3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in
GNU/Linux that broke the regex. This is corrected now.
4. Fixed a few small man page glitches, some ordering stuff, nothing major.
5. Fixed BSD hostname issues. There was a case where a setup could have no hostname,
inxi did not handle that correctly. This fix would have applied to gnu/linux as
well.
6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in
OpenBSD that was not checked. This also went along with refactoring the dm logic
to be much more efficient and optimized.
7. Fine tuned dmidecode error message.
8. Fixed PCI ID issue, it was failing to catch a certain bridged network type.
9. A more global fix for unhandled tmpfs types, in this case, shm, but added a
global test that will handle all tmpfs from now on, and exclude that data from
-p reports.
NEW FEATURES:
1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No
speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda
type devices (IDE bus) may not get handled in all cases. This may get more work
in the future, but that's a long ways off. This case oddly was one where BSDs had
support for basic disk speed reports before GNU/Linux, but that was really just
because it was part of a single data line that inxi parsed for disk data anyway
with BSDs.
2. Man items added for -Dxx disk speed options.
The main reason to release this earlier than I had hoped was because of the /sys
permission change for serial/uuid file data. The earlier we can get this fix out,
the better for end users, otherwise they will think they have no serial data when
they really do.
FIXES:
1. this bug just came to my attention, apparently the (I assume) kernel people
decided for us that we don't need to see our serial numbers in /sys unless we are
root. This is an unfortunate but sadly predictable event. To work around this
recent change (somewhere between 4.14 and 4.15 as far as I can tell), inxi -M and
-B now check for root read-only and show <root required> if the file exists but
is not user readable. I wish, I really wish, that people could stop changing stuff
for no good reason, but that's out of my control, all I can do is adjust inxi to
this reality. But shame on whoever decided that was a good idea.
This is not technically an inxi bug, but rather a regression, since it's caused
by a change in /sys permissions, but users would see it as a bug so I consider
this an important fix.
Note that the new /sys/class/dmi/id permissions result in various possible things:
1. serial/uuid file is empty but exists and is not readable by user
2. serial/uuid file is not empty and exists and is not readable by user
3. serial/uuid file does not exist
4. serial/uuid file exists, is not empty, and is readable by root
Does this change make your life better? It doesn't make mine better, it makes
it worse. Consider filing a bug report against whoever allowed this regression
is my suggestion.
BUGS:
1. A weather bug could result in odd or wrong data showing in weather output, this
was due to a mistake in how the weather data was assembled internally. This error
could lead to large datastore files, and odd output that is not all correct.
2. More of an enhancement, but due to the way 'v' is used in version numbers,
the program_version tool in some cases could have sliced out a 'v' in the wrong
place in the version string, and also could have sliced out legitimate v values.
This v issue also appeared in bios version, so now the new rule for program_version
and certain other version results is to trim off starting v if and only if it is
followed by a number.
FEATURES:
1. Added in OpenBSD support for showing machine data without having to use dmidecode.
This is a combination of systcl -a and dmesg.boot data, not very good quality data
sources, but it is available as user, and it does work. Note that BIOS systems
are the only ones tested, I don't know what the syntax for UEFI is for the field
names and strings. Coming soon is Battery and Sensors data, from the same sources.
Sadly as far as I know, OpenBSD is the only BSD that has such nice, usable (well,
ok, dmesg.boot data is low quality strings, not really machine safe) data. I
have no new datasets from the other BSDs so I don't know if they have decided to
copy/emulate this method.
2. By request, and this was listed in issue #134, item no. 1, added in weather
switchable metric/imperial output. Also added an option, --weather-unit and
configuration item: WEATHER_UNIT with possible values: cf|fc|c|f. The 2nd of
two in cf/fc goes in () in the output. Note that windspeed is m/s or km/h as metric,
inxi shows m/s as default for metric and (km/h as secondary). Also fixed -w
observation date to use local time formatting. That does not work in -W so it shows
the default value.
3. Updated man to show new WEATHER_UNIT config option, and new --weather-unit
option. Also fixed some other small man glitches that I had missed.
This is a big one.
NEW FEATURES:
1. By Request: Disk vendor is now generally going to be shown. Since this uses
empirical data to grab the vendor name, from the model string, it will not always
find anything. When it fails to find vendor data, no vendor: item will show.
Note that some MMC devices will probably not show vendor data, but that's due to
there being no data that reveals that.
2. Extended -sx volts to also show voltage from lm-sensors if present. Many
systems show no voltage data with lm-sensors, but now if any is found, it
will show, same as impi.
3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and
label data.
Falls back to previous methods if lsblk does not return data. Some lsblk do not
show complete data unless super user as well.
4. Refactored code to be more logical and clear.
5. Added for OpenBSD -r: /etc/installurl file.
BUG FIXES:
1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk
model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself.
To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not
ever do this truncation. It's also faster I believe to read that directory
once, filter the results, then use the data for vendor/model/serial.
this was also part of the disk vendor data feature.
2. Openbsd networking fix. Was not showing IF data, now it does.
3. Fixed bug with unmounted where sometimes md0 type partitions would show
even though they are in a raid array.
4. Fixed disk rev, now it searches for 3 different files in /sys to get that data.
5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that
error did not get redirected to /dev/null, so now only using sudo -n after explicit
version test, only if 1.7 or newer.
6. Fixed a few null results in fringe cases for graphics. Resolution now shows
NA for Hz if no hz data found. This was only present on a fringe user case
which is unlikely to ever impact normal X installations.
7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
Bugs fixed:
1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully
more reliable, removed all explicit b_xeon based tests.
2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed.
3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling.
4. freebsd: fixed similar partition bugs, these were caused by the darwin patch.
5. man page: fixed top synopis syntax, thanks ESR.
6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers
so we can track down this failure in the future.
7. added sshfs filter for disk used output, note, there is a possible syntax for
remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes
explicit detection of still unknown remote fs very difficult since : is a legal
nix filename character.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
bad array looping error.
2. for issue #143, added user PATH to static list of paths, this works around distros
that have chosen to abandon the FSH standard, sigh... This adds to number of paths that
have to be checked, but there was no clean way to handle it otherwise.
3. For MATE, added new version source, mate-session, because mate-about was reporting
a non-matching version number for current MATE.
Two enhancements/bug fixes:
1. inxi did not have support for network block devices /dev/nbd0 type syntax in
disks.
2. this caused a slight failure in lsblk output, so I switched to using lsblk -P
to force paired key values, which are then put into an array of hashes.
These both appeared on an ARM server system, but surprisingly, there were no ARM
specific issues at all on that system.
Both issues/enhancements tested and working fine.
Rolls up a few changes from the latest features:
1. For -Dxxx, if root, will use fdisk to try to find partition table scheme (mbr/gpt)
2. For Display: <protocol> server: will try to use loginctl if out of X and using
--display flag to force display data and not root.
This completes more or less the very last minute features added pre 3.0.0 version.
I wanted to get these in because the features were not super useful since they only
worked on a few systems, particulary the scheme:
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
like --sleep and -t.
Edits to layout and language, removed some legacy options and language from man and
inxi.
Added partition table detections, rough initial stage. Only works on systems with
udev present currently, will be expanded as we find fast tools. Since the systemd
method is literally up to 25x slower than the udev method, it's not being considered
except maybe as a last, last resort, and probably will never be used.
Many small bugs fixed.
Enhancements:
1. in some cases, will detect partition table type (GTP,MBR) either
with or without root. Uses fast method, which is not available on all systems.
2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that
use IPMI.
3. Finished man page edits and corrections. Thanks Pete.
4. Added doubled word filter for main -NGA lines, only for Card items.
5. Gave more granular uptime output: like: uptime: 23d 5h 34m
Bugs fixed:
1. RAID - both mdraid and zfs bugs corrected. Issue #135
2. EPYC cpu wrong die count corrected, and also added support for the EPYC type.
Issue #135
3. Possible ARM data glitch that made reader fail on a non-existent file.
Man:
Ongoing updates and edits and corrections and cleanup. Slowly but surely.
1. Bug: cause unknown, but crashes on null file sent to reader, but all those files
have been checked. For now added return if file null.
2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show
running in: xfce-terminal (SSH)
ssh session active on remote system.
Various help and man cleanups and additions.
Bugs fixed:
1. stray undefined value corrected
2. fixed BSD no pkg server case, now shows correctly that no pkg server files
were found, not that the OS is not supported.
Features:
1. -t c and m headers cleaned up and simplified
2. man page edits.
3. more standarization of key names for fields, some spelling
and upper/lower case corrections.
