items and am now just generating one: Locator item, usually from Slot/DIMM locator info,
but sometimes from Bank Locator info when it is more reliable based on my data samples.
Updated help menu, updated man page, now shows working -x -xx -xxx extra data. This may
change slightly over time.
Also removed speed output when No Module Installed is returned for device size. This
also wills switch off width if both total/data are empty.
This is much closer now to live 2.2.0, but I'll leave a few more tests before putting
it at 2.2.0.
support. This feature requires dmidecode, and usually that needs to be run as root.
Significantly improved dmidecode error handling and output, and have as 2.1.90 testing/initial
release basic ram data.
In subsequent releases, extra info for -x and -xx and -xxx will be added as well to the output.
For those who want to jump on board early for ram data, update your repos, for those who want to
wait for the full featured version, with -x type data, wait for 2.2.0
And that's that.
It turns out I'd neglected to include /dev/disk partitions, oops, in the df data.
Since this is a long time bug, it warrants a new release even though I just did
2.1.22.
disk used percentage as well. Since swap space is not available as disk space, it
makes sense to me to count it as used. -P/-p show the percent of swap used as well.
for the next major feature, -m / memory, so there is no particular reason to package
this release. There is a new development option, -! 33, which lets me override /sys
data use for -M, which is useful to debug dmidecode output for -m and other features.
No new version, new man. There may be a few more of these releases, but functionally
there is no particular reason to make a new package if you are a maintainer, so there
is no new version number. This release is a preparation for some branches/one/inxi
tests that will be run in the future.
The man/help document -! 33 just to have it there, but it should make no difference
to anyone but me at this stage.
of width settings. This overrides any dynamically detected widths, as well as the globals:
COLS_MAX_CONSOLE='115'
COLS_MAX_IRC='105'
Now that inxi widths are largely dynamic in terminal, with a few lingering exceptions, it made sense
to also allow for overrides of this. This is useful in cases where for example you want to output
inxi to text file or for other purposes, or if you just want to test the widths, as in my case.
-y cannot be used with --recommends, but otherwise it works fine, with --help/-c 94-99 you have to
put -y first in the list of options.
Example: inxi -v7 -y150 > inxi.txt will ignore the terminal settings and output the lines at basically
max length.
time to make it easier to test stuff one by one.
Full refactoring/reordering of top global variables, moved user/maintainer set variables
to top, and clearly identify all globals.
Changed LINE_MAX to COL_MAX but all user configuration files will stay working since
inxi now will check for that and translate them to the new variable names.
New lines fixed, -C cpu and -f cpu plus full flags. Flags output is now fully dynamic to
display screen in terminal/console. Moved cpu short flags to -x because it's not that
important in general and just clutters things up in my opinion.
Print flags/bogomips on separate line if line greater than display width.
The rest of the lines will get a similar treatment, but it takes a bit of trial and error
for each line to get it working right.
Note that IRC line lengths are NOT dyanamic unless I can find a way to determine the column
width of irc clients, but that won't be accurate since fonts vary in widths for each character.
CPU was the worst offender in my opinion in terms of regular output wrapping to new line messily,
next will be the things with ports/chip id/card id.
Tightened up a bit more the dyanamic help / version output handler.
window column width help/version outputs. There is a significant slowdown to achieve this,
but I've optimized it as much as I could so it should be acceptable for most users now.
type if openrc). -xx shows init / rc version number. Change runlevel to target if
systemd and if non numeric runlevel given. Should support systemd/upstart/epoch/runit
sysvinit. Supports openrc as extra data if it's present. Rearranged -I line a bit but
really just exchanged Runlevel: for Init: v: Runlevel: default:
This is the first step, some of the init system ID methods are weak and non robust
and this may need to be revised, but it should for now identify systemd/upstart quite
accurately, and in most cases sysvinit. Note that to get sysvinit version number requires
tool: strings which in debian/ubuntu is in package binutils. I don't know the package names
for arch/fedora/etc for the recommends check tool in inxi yet.
I believe this will be good enough for a first draft version, but over time we'll get it
more fine tuned, but as it is now, it should cover at least 99% of users, which isn't bad.
for adding alternate display servers, like Wayland or Mir. Rather than release all the
stuff at once I'm going to do it bit by bit. Currently I have not found a wayland iso
test cd that boots in virtual box so I will have to wait to really add support there.
to show default runlevel, using systemd/upstart/sysvinit type default tests.
Fixed gtk library version detections, now will support dpkg/pacman version tests, which
should give more data to more people than previously, where the old tests usually would
return null unless gtk dev packages were installed on the system.
Other distros than Mandriva, Mageia, no other changes so no need to update unless you want to.
This adds support for Mandriva, Mageia. urpmq parsing is similar but not identical to pisi.
so I've updated that. -f for ARM now shows features instead of flags, and the -C regular cpu output does not
show cache/flags for arm cpus becuase they don't have those features.
Added some flags passed to various cpu functions and better detections of ARM cpu to handle dual core and other
issues that were not handled before as well, or at all.
That was too hard to type and too hard to remember. Also do more dyanamic reordering of weather
output, depending on how much data is present, and how many x options are used.
Added error handling for generic deprecated options, and for options that do not have the correct
syntax for OPTARG, like with -W.
This should about do it for the weather option for now unless I missed something somewhere.
-! location= option, to indicate that users must replace space with + themselves.
Because of how bash handles these options, inxi cannot add in + signs itself automatically.
This should be closer to cleanup of this new feature.
weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather
and system time there. -x adds time zone, which is useful for servers, particurly web servers.
-x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line,
if data is available, heat index, wind chill, and dew point.
-xxx also adds a line for location (blocked by irc/-z) / weather observation time.
-z filter applies as usual to location data, removes it in irc by default. -Z overrides override.
The api this uses is probably going to be dropped at some point, so this is just going to work
while it works, then it will need to be updated at some point, so don't get very attached to it.
Also adds option to, with -w: -! location=<location string>
This lets users send an alternate location using either <city,state> or <postal code>
or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order
must be as listed.
If There is a developer flag if distro maintainers do not want this enabled, simply set:
B_ALLOW_WEATHER='false'
before packaging and the weather feature will be disabled.
partitions) would show components of the md raid array as unmounted partitions.
This is of course incorrect, and is now fixed.
Small update of man page as well to note that -o will not show components of mdraid arrays.
status as with mdraid, will show offline/failed devices as well in standard output.
Updated help and man page to reflect the difference between -R, -Rx, and -Rxx output for
zfs / mdraid.
No linux inxi changes, this should not alter any behaviors in -R for mdraid, if it does, it's
a bug, please report it.
Fixed partition bug that could falsely identify a remote filesystem like nfs as /dev fs
Added two options:
-! 31 - Turns off Host section of System line. This is useful if you want to post output
from server without posting its name.
-! 32 - Turns on Host section if it has been disabled by user configuration file
B_SHOW_HOST='false'
Added missing CPU data message, fixed missing cpu cache/bogomips output, turned off
bogomips if null for bsd systems because bogomips is a linux kernel feature.
Added N/A for no memory report, this would mainly hit bsd systems where user has no
permissions to use sysctl or has no read rights for /var/run/dmesg.boot.
Many fixes for partitions, now for bsd, if available, uses gpart list to get uuid/label
Added support for raid file system syntax in bsd, now excludes main raid device name,
and adds a flag to raiddevice/partitionname type so output can identify it as a raid
slice/partition.
In man page, added -! 31 / -! 32 sections, and some other small edits.
Added bsd raid line error message, added bsd sensors line error message.
Many other small bug fixes that should make linux more robust in terms of missing
data, and better/cleaner output for bsd.
properly support the -s option. Now -M uses only one method for dmidecode, manual construction of the Machine
data from the raw dmidecode file. The file output is also parsed a bit to make it more consistently reliable
for inxi purposes.
This update also includes all recent bsd branch updates, including the new #!/usr/bin/env bash on top which
lets inxi run in any environment without changes. Also for bsd, sets sed -i/sed -i '' global value, which
means that now all the branches are the same, except the bsd branches will contain the most recent tests
and bsd handling.
As each step is reached, I'll release a new inxi that should be stable, this is the first one however that
can be used as is, no changes, for bsd, debian kfreebsd, and linux systems.
Pleasen note that most bsd features are either incomplete or missing completely at this point, but it's a
start.
Some initial changes as well to help options to show more correct linux or bsd terms. These will be updated
as time permits, it is a long process.
small change -Ixx will show running in tty if it's not in X, with tty number.
sort of redundant to System: console: data, but that's ok, we'll live for now.
an ssh command sometimes it will not show any client information, just the debugger
PPID output. Now it will test as a final check to see if it can detect any parent to
the process. Actually grandparent I believe. Seems to work, it's a fringe case but
why not handle it?
New -xx feature, for -I it will show, if inxi is not running in IRC client and if
is running in X, and if the grandparent is not 'login', will show the application
the shell is running in.
Example:
Info: Processes: 271 Uptime: 5:36 Memory: 3255.8/4048.5MB Runlevel: 3
Gcc sys: 4.7.2 alt: 4.0/4.2/4.4/4.5/4.6
Client: Shell (bash 4.2.37 - started in konsole) inxi: 1.8.33
