Now there is an -x option for -i that will show the additioanl IPv6 address data for scope global,
temporary, and site. Also a fallback for unhandled scope: unknown. If the tool 'ip' is used, it will
filter out the deprecated temp site/global addresses, ifconfig tool does not appear to offer this
option.
Also changed is that now ipv6 address always shows, it's not an -x option. Probably about time to
start rolling out ip v6 data to users now that ip v6 is starting, slowly, to be used more.
Another small change, the link address for ipv6 is changed from ip-v6: to ip-v6-link so that it's
more clear which IP v6 address it is.
The last commit had a significant logic error in it that did not distinguish between the link address,
which is what should have only shown, and the remaining possible addresses.
I've tried to get a basic bsd support, but it's difficult to know the variants of ifconfig output syntax
Improve IPv6 handling to cope with multiple addresses. After reviewing issue 78 and the links in it, which I'm glad I added since they explain the stuff pretty well, I'm accepting this patch as is. I'm not positive about the temporary address being hidden, but it's easy enough to modify that in the future if it's an issue.
Note that this bug is not universal, but I believe this will make inxi more right than wrong
as a general rule. Further note that altitude is NOT actually the altitude of the city/location
requested, in most cases, but rather the altitude of the weather station data assigned to that
location request.
from BIOSTAR. Also fixed a few other sloppy gsub, and fixed a few gensub errors as well.
Since BIOSTAR is a fairly common mobo, I'm surprised I haven't gotten this bug report
before.
This closes issue #102.
While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests:
1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively.
2. Since those will often be blank, it then uses a second priority check:
$HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here:
$HOME/.inxi
3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before
In order to make this switch transparent to users, inxi will move the files from .inxi to the respective
.config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup.
Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in
/usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help
users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky
to guess about user or system intentions, this man location correction will only apply if users have never
installed inxi before manually, and have no distro version installed, unlike the config/data directory,
which does update neatly with output letting users know the data was moved.
Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up
instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way,
ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise
using if present the /usr/local/share/man/man1 location for new manual install users.
Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current,
then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that
inxi will update to the new man location.
Also added some more XDG debugger data as well to cover this for future debugger data.
This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and
issue 101, which I made today just to force the update.
Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG
and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated,
and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner
at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
graphics driver, so it would not show in output, which causes support issues for users of that specific
driver, like some cases of Intel. Also inxi would always have failed to show it unloaded in cases where
radeon/nouveau were used but it had been loaded by xorg to begin with. So probably worth updating packages
I'd say.
each disk is on its own line always, this makes it easier to read and/or parse.
Also, the lines now wrap nicely for extra data > console width, or -y 80 for example if
you're trying to force most of the data to fit into 80 columns.
handling, and legacy linux. VM id will remain a work in progress, and will probably
require a few fixes for fringe cases. Nice to have would be things like OpenBSD's
vm which is difficult to detect. However, I believe this should handle roughly 99% of
realworld vm id cases, except for some commercial stuff that will require more data.
have one case where a laptop reports as pizza box, and desktops generally do too,
and they could be a server, or used as a server due to 1U form factor.
Now -M shows device type, like desktop, laptop, notebook, server, blade, vm (and tries to get vm type).
vm detection will take more work, for now I'm just going for the main ones used, but it will certainly
miss some because it's hard to detect them in some cases unless you use root features. Also note, in
most cases a container I believe will display as a vm, which is fine for now.
For BSDs, and older linux, there is a dmidecode fallback detection as well.
Basic support added for Budgie desktop detection. This is waiting more data, so the support will be
missing the version information. Go Budgie!!
Added /var/tmp and /var/log and /opt to basic partition data: -P
This will probably not impact more than a handful of people in the world, but that's fine.
Modified the static BIOS in -M to now show UEFI for actually UEFI booted systems, and, ideally,
UEFI [Legacy] for UEFI booting in bios legacy mode, and BIOS for all others. Hopefully this will
work ok, we'll see.
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
A sloppy unescaped / triggered a failure I didn't notice in partition info.
Please update your inxi packages immediately if your version is 2016-03-21 or newer.
on /etc/issue step to first test for os release and not mint, then lsb verison and
not mint, then /etc/issue. This should keep the mint detection working well, as long
as they keep mint string in the /etc/issue file, that is, but that's out of our control.
test for the non deprecated battery test, /sys/class/power_supply/BAT0 existence.
This resulted in failure to indicate 'portable' where applicable.
I may also now add battery information where applicable since that's easy to get from
/sys
1. Add amdgpu to possible xorg drivers list (and gpu sensors data)
2. switch to default dig command to get WAN ip. This is usually but not always faster than
the http method. Because the IP source is not truly trustworthy (run by cisco), I'm keeping a
fallback mode on 1 second time out failure of the previous http based methods. Added dig
to recommended tools list.
