Because I don't want to break existing cpu logic, I just added in a rizen switch,
which will just use cpu_core_count value, then trigger HT output.
This fix may or may not work, but the issue poster vanished and has not followed up.
For now I'm keeping this a Ryzen specific adjustment, but it may be safe to extend
it further, that is, if siblings > 1 && siblings = 2 * cores then it's HT.
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
easier and more predictable to find. Better section headers, all ordering alpha
by subsections.
Fixed some small debugger gatherer oversights as well.
Note that I made the debugger stuff more portable, so I could use it in another
program.
Note that this is the last choice because it's slow, the order has been revised:
1. curl
2. wget
3. fetch
4. Perl 5 HTTP::Tiny
5. OpenBSD ftp
wget has been downgraded due to the recent 1.19-2 bug with wget -O that did
not get resolved quickly, and which should never have been released since
that's a basic wget action, which means they aren't testing gnu wget the way
they should be.
All inxi downloaders can now use this option. However, in my tests it's signicantly
slower to use HTTP::Tiny than curl or wget, so inxi will test for the downloaders
in that order. While -i uses dig as it's primary IP tool, if dig is not installed,
the IP will follow the same downloader priority. -U and -w/-W use downloaders.
Because HTTP::Tiny is optional, and is merely used if wget/curl/fetch are not
installed, I would not consider Perl to be a real dependency yet, just an option, so
I guess for packager maintainers, Perl should be added as a recommends, or a
dependency if you want to fully support the debugger options (Core Modules).
While I'm still not sure which Perl modules I'm going to be using, I'm sticking
for now to Core Modules, the standard, with some experimental exceptions that
would only be used if the user had them present.
Long term the goal is to get rid of as many dependencies as possible, replacing
them were possible with Perl tools, but this is going to take forever, if it
ever happens, so don't hold your breath.
In the future, I expect more and more components that were gawk to be rewritten
to Perl (Core Modules), slowly, however, very slowly.
Updated --recommends to indicate the downloader options more clearly as well.
Added new options for bypassing curl (-! 41), fetch (-! 42) wget (-! 43), or
curl, fetch, and wget (-! 44) to disable all of them. This is in case one of
those is broken or you want to test Perl downloader, mostly.
Also cleaned up debugger output and made debugger portable to other scripts.
ARM data collection in /sys.
Using 'tree' now instead of ls if it is installed for debugger /sys tree listing.
Added to recommends. Updated bluetooth recommends to note it's dev only. That
should fix issue #127
branches, simplified the options. This corresponds to updates on github where
I'm finally bringing the alternate location self updater back into operational
state after a long dormant period.
Also, and this may be of interest to some maintainers, please note, there is
a new branch: master-plain which does NOT have the gz files inxi.1.gz and
inxi.tar.gz
If you want to avoid the big clones, you can use that branch with this command:
git clone https://github.com/smxi/inxi --branch master-plain --single-branch
And that should only track the basic 3 files: inxi inxi.1 and inxi.changelog
This fixes issue #94
explicitly setting Passive => 1 (true) for some systems and firewall
configurations.
This corrects a failure to upload issue I experienced for a test remote
system that had a different firewall configuration than the dev system has.
nvme disk capacity in full disk capacity listing. Adds nvme name/serial/firmware
revision number. The latter is a new -Dxx output option. Note that as far as I could
tell, so far, nvme is the only disk type that has firmware revision data.
Added support for nvme disk temperature as well, that requires the cli tool nvme.
Updated AMD microarchitecture list to be more granular and complete. Added Intel
microarch type. Note that they are releasing a few new microarchitectures soon but I
was not able to find any model numbers for those.
of the xiin.py tool, which is going to become obsolete when python 3 fully replaces python 2.
Since the odds of perl being around and stable are far higher than the odds of xiin.py
even working on python 3, I'm getting ahead of the race. Plus Perl is nicer to work with.
And Perl is a lot faster. I mean, a lot. Not slightly.
And it also works on much older systems, and does not have that Python version < 2.6
failure due to changing Python syntax even between sub versions. xiin.py never ran on
Python 2.5 even when it was relatively recent, which is one reason I'm removing all Python
from inxi.
Basically xiin.py worked only on Python 2.6 or 2.7, period.
Oh, and also handled issue #115 by not making -B show -M data.
The issue was not so much with xiin.py as with some new values in /sys that would
hang tree traverse, however, in order to remove the python dependency (except for
uploading -xx@ debugger data, until I can figure out how to do it with Perl), I
rewrote the tree traverse tool into Perl, which also makes it a lot faster and
easier to work with.
This issue appeared on kernel 4.11 as far as I can tell, some new values in /sys make
the traverse hang if it tries to read the values, **/parameters/** and **/debug/** seem
to be the main culprits, but inxi doesn't need that data anyway for debugging purposes
so it's just excluded.
in issue #118
The data seems to suggest that using POWER_SUPPLY_VOLTAGE_MIN_DESIGN as the factor will
be right more often than using POWER_SUPPLY_VOLTAGE_NOW.
Also optimized a bit more on the desktop id logic.
the conversion from mA hours to Wh, and had a math glitch too for charge (ma).
Not sure how this went undetected during testing, oh well. I assume that mA h is not
as common internally as Wh or something.
Anyway, it should be fixed.
-o, -p, -l, -u, -P, -S, -G, -N, -A
Now most output should tend to not wrap, though some strings are unpredictable and
will have to be trimmed by adding them to the min size trimmers one by one.
But it's much better than it was.
Note the following changes required to make the wraps more consistent:
-S - the gcc/bits have been made separate, like: bits: 32 gcc: 5.3
-C - the new microarchitecture -x option now is: arch: K7 [for example]
cache wraps to next line with arch. with -f, bmips now shows on same line as
arch/cache
would have caused failure on older systems. Also added Bash version checker.
Most ps aux data is now searched using bash parameter expansion, and several functions
that were in subshells are now printing to globals instead.
as well so you can see which revision of the cpu microarchitecture your cpu has.
Also fixed a few random vm id issues, I found cases where systemd believes it's bochs
but it is actually kvm, so now the systemd data is not fully trusted, but is confirmed.
Will need some updates to bring the family/model ids to fully current, but should show data for most
cpus. Next release will hopefully include latest model/family ids and microarchitecture names.
Note that while /proc/cpuinfo has the family/model id in decimal, the values are actually generally
found as hexadecimal, so inxi translates that interally so we can store the data the way it is presented.
See issue #116 for ongoing additions to this feature.
but Xorg has not started, which means inxi can't get the video driver from Xorg.0.log as with X.
Added in extra data collection from lspci -v to include the driver for graphics card. this is
only used, for now, if the initial Xorg based driver test works.
Note that this may also work for systems that have not yet started X out of X, in console, I'm
not sure about that, but the graphics driver reporting should be improved.
Note that I'm not yet linking the driver to the specific card/device, it's just going to show
in a comma separated list, I couldn't find multi card systems where the card types are different,
like amd gpu with nvidia card, for example.
But this should correct an issue, at least to start, with expanding wayland support for systems
that don't use or have not started the desktop with Xorg/X11 etc.
core profile data being null, which in turn triggered a bash oddity, where if the IFS is
\n for an array, and if the value of one element is '', then bash ignores that and does
not simply set an empty array key as you'd expect. The correction was to change the IFS
to ^, which worked fine for empty array values.
However, since this bug will impact anyone with empty opengl core profile data, I recommend
updating inxi.
Also, added support for two smaller wm, Sawfish and Afterstep.
This is a good source for lists of wm: http://www.xwinman.org/http://www.xwinman.org/others.php
However, that does not show how to ID it, so i have to do it on a case by case, but I'll
add an issue for showing how to get your wm of choice if it's missing to inxi.
long-standing issue where /dev/ram.. data shows in unmounted disks output. This is
now properly filtered out.
Note that the floppy disk output has no information beyond it's /dev id, eg: /dev/fd0
I could find no meaningful data in /sys related to the floppy disk, not the model, etc, so
I'm just showing presence of disk.
wget/fetch/curl. This allows systems with for example out of date certificate stores
to still download without error. Also a legacy system fix where tty size failed to show.
Also cleaned up man page, slightly changed output for compat version to: (compat-v: 3.0)
gfx variable name fixes to make more obvious the logic as well.
Default will get data from display :0, but if you append :[display-number] to -! 40, it will
use that display instead, for example: inxi -! 40:1 would get information from display 1. Note
that most multi-monitor setups use :0 for both monitors, depending on how it's setup.
This will also let users see any desktop information based on xrop -root output, but it will
depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for
primary detection would not work, for example.
used to not work as root in X, but they do now. So I've removed the root tests for graphics
output, and now only rely on the returned data to determine the output when in X. Out of X
behavior remains the same.
Note that at some point I'll have to see if wayland systems have usable reporting tools to get
screen resolution, opengl info, and so on, but that will have to come one step at a time.
-xx option will show OpenGL compatibility version number as well, though that's largely useless
information for most users, thus the -xx. Note that this reverses the default, which previously
showed OpenGL version, which is actually the compatibility version.
This should resolve#105 pull request, though it does it differently, by switching the default
output to what is more relevant, and offering the compatibility version as an optional output item.
Note that much of the glx information will probably change to more neutral terms once wayland support
starts growing, and systems without xwayland etc libraries appear.
Further note that non free drivers showed the OpenGL core profile version numbers all along, so really
this simply corrects misleading output for free drivers.
and compositor support.
This finally implements a first try at mir/wayland detection, along with basic handling of actual
display server type output.
New output for Display Server: Display Server: x11 (X.Org 1.19.0) driver: nvidia
Note that since almost all current Wayland systems will have X.org also installed, for the time
being, the data in the parentheses will be from X.org regardless of what display server is detected running
the actual desktop. Out of the desktop, console, the only thing that will show is x data..
No other data is available to me yet until I get way more debugger data so I can see what information the various
implementations of wayland without x tools actually makes available, my guess is it won't be much.
Also experimental -xx option: -G shows compositor, but only for wayland/mir currently.
I have no idea if this will work at all, but it's worth giving it a try as a rough beginning to
start handling the wide range of wayland compositors being created.
This feature will probably take several versions to get stable.
Also added new debugger data collector data for wayland information, but the pickings are slim, to
put it mildly.
Now there is an -x option for -i that will show the additioanl IPv6 address data for scope global,
temporary, and site. Also a fallback for unhandled scope: unknown. If the tool 'ip' is used, it will
filter out the deprecated temp site/global addresses, ifconfig tool does not appear to offer this
option.
Also changed is that now ipv6 address always shows, it's not an -x option. Probably about time to
start rolling out ip v6 data to users now that ip v6 is starting, slowly, to be used more.
Another small change, the link address for ipv6 is changed from ip-v6: to ip-v6-link so that it's
more clear which IP v6 address it is.
The last commit had a significant logic error in it that did not distinguish between the link address,
which is what should have only shown, and the remaining possible addresses.
I've tried to get a basic bsd support, but it's difficult to know the variants of ifconfig output syntax
Note that this bug is not universal, but I believe this will make inxi more right than wrong
as a general rule. Further note that altitude is NOT actually the altitude of the city/location
requested, in most cases, but rather the altitude of the weather station data assigned to that
location request.
from BIOSTAR. Also fixed a few other sloppy gsub, and fixed a few gensub errors as well.
Since BIOSTAR is a fairly common mobo, I'm surprised I haven't gotten this bug report
before.
This closes issue #102.
