to identify a partition, but rather the basic /dev/sdc for example.
This made -D show wrong disk used percentage.
Also, I added --total for df that have that supported, there is however an oddity which you
can see here:
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} !/total/ {total = total + $4 }END {print total}'
result:
614562236
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} /^total/ {total = total + $4 }END {print total}'
result:
614562228
df -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs --exclude-type=procfs \
--exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs --exclude-type=unionfs | \
awk 'BEGIN {total=0} {total = total + $4 }END {print total}'
result:
614562236
In my tests, using --total gives a greater disk user percentage than adding the results
up manually, as inxi did before, and still does for systems without --total for df.
df --total -P -T --exclude-type=aufs --exclude-type=devfs --exclude-type=devtmpfs \
--exclude-type=fdescfs --exclude-type=iso9660 --exclude-type=linprocfs \
--exclude-type=procfs --exclude-type=squashfs --exclude-type=sysfs --exclude-type=tmpfs \
--exclude-type=unionfs
Filesystem Type 1024-blocks Used Available Capacity Mounted on
/dev/disk/by-label/root-data ext3 12479556 12015624 335816 98% /
/dev/sdc9 ext3 20410156 18013360 1979432 91% /home
/dev/sdc7 ext3 4904448 3785460 1016672 79% /media/sdb2
/dev/sdc5 ext3 30382896 27467220 2295720 93% /var/www/m
/dev/sdc8 ext3 61294356 41849300 18196972 70% /home/me/1
/dev/sdb1 ext3 307532728 285159432 20810456 94% /home/me/2
/dev/sdd1 ext3 26789720 18153076 7542620 71% /home/me/3
/dev/sdd2 ext3 213310776 206932912 2040960 100% /home/me/4
/dev/sda7 ext3 10138204 1185772 8434348 13% /home/me/5
total - 687242840 614562156 62652996 91% -
Strange, no? the data is in blocks, and it should of course in theory add up to exactly the
same thing. However, because --total lets df do the math, I'm going to use that for now,
unless someone can show it's not good.
inxi still falls back for bsds and older df to the standard method.
of disk drive lists. Was showing USB ID-1: /dev/sde now shows: ID-1: USB /dev/sde
that is more intuitive and keeps the columns in alignment more or less, easier
to read.
Second, fixes a bug with some file systems / usb drives
where they do not use usb- in the /dev/disk/by-id line but only wwn-
https://access.redhat.com/site/documentation/en
-US/Red_Hat_Enterprise_Linux/5/html/Online_Storage_Reconfiguration_Guide/persistent_naming.html
explains it somewhat.
the fix is adding a second if null test of the device /dev/sdx in by-path, that seems
to fix the issue. by-path does have the usb- item, though it does not have the name
so it's not as reliable in absolute terms, but it's fine as a second step fallback
option.
for the next major feature, -m / memory, so there is no particular reason to package
this release. There is a new development option, -! 33, which lets me override /sys
data use for -M, which is useful to debug dmidecode output for -m and other features.
No new version, new man. There may be a few more of these releases, but functionally
there is no particular reason to make a new package if you are a maintainer, so there
is no new version number. This release is a preparation for some branches/one/inxi
tests that will be run in the future.
The man/help document -! 33 just to have it there, but it should make no difference
to anyone but me at this stage.
way to handle bad ARM data, when bogomips are too low, < 50, we try to get the data
from /sys, but now this runs on all the cores, so it may work as well on the multicore
arm if the /proc/cpuinfo has bogomip that is too low and no cpu frequency.
unmounted drives.
IMPORTANT: some distros use inxi for detecting partitions, the syntax on the following
have changed slightly:
HDD: per drive changes from: 1: id: to ID-1:
Partitions: per partition changes from ID: to ID-1:
Unmounted partitions: per unmounted changes from ID: to ID-1
You see the pattern, they are all the same now, and they are all numbered. I think this
is easier to read when scanning long lines of drives/partitions, or even short ones.
Also fixed a long standing oddity, not a bug, but for some weird reason, -p did not
include the location, like /dev/sda1, unless -l or -u were used. That makes no sense
so I have moved the dev/remote location output to standard -p/-P
Except for bug fixes, this completes the overally line wrap update, all lines wrap,
you can set widths with -y now, and the old issue of not fitting nicely into 80 column
wide widths is solved. Note that in some areas, p/P for example, at times if the mount
point or remote location is very long the line may still wrap, but making this perfect
is too convoluted so I'm calling it good enough now, all lines are handled reasonably well,
certainly radically better than before 2.1.0.
of width settings. This overrides any dynamically detected widths, as well as the globals:
COLS_MAX_CONSOLE='115'
COLS_MAX_IRC='105'
Now that inxi widths are largely dynamic in terminal, with a few lingering exceptions, it made sense
to also allow for overrides of this. This is useful in cases where for example you want to output
inxi to text file or for other purposes, or if you just want to test the widths, as in my case.
-y cannot be used with --recommends, but otherwise it works fine, with --help/-c 94-99 you have to
put -y first in the list of options.
Example: inxi -v7 -y150 > inxi.txt will ignore the terminal settings and output the lines at basically
max length.
Audio -A - now wrap is fully dynamic down to 80 characters, and also the expansion of ALSA
to Advanced Linux Sound System only happens if that fits in the display width.
-N/-n/-i - Most networking/ip address stuff wraps now.
-d - optical drive data wraps better now too.
This more or less completes the line wrap redo.
strings --version used in the debugger results in a hang, which you can duplicate with:
strings
alone, without any argument or info, that will hang too, so I assume if the system doesn't
have the --version parameter, strings ignores that, and basically just does what it would do
with no option, hang.
Thanks for user ypharis persistence in tracking down this issue. So far only appeared on slackware
based distros, but since the debugger should 'just work', removing the version test.
methods:
something <<< $variable is signficantly slower than: echo $variable | something
so I replaced almost all instances of <<< with echo ...|
I've seen speed differences of up to 10% but it's not consistent, so this is just
something to boost performance slightly on older systems I'd guess.
when the supybot
'SHELL' command is used, 'CALL' gives the user irc client data, and
supybot etc are
not detectable.
Fine tuned some error message lengths so they fit into 80 columns or so.
for systems with a lot of them, that will clean up the output.
Added dynamic wrapping to --recommends and -c 94-99.
These are the main things, there's a few smaller issues with -xx output on -N/-n/-i but
those will noly really show with full output and it takes a while to get this stuff stable
so maybe some other time, but it's ok for now.
the bus id itself to determine if the
VGA compatible controller
3D controller
Display Controller
refer to separate chips or the same one.
Bus id gives the data needed, because the video chip, the real card, that is,
is on for example 00:05.0 the trailing .0 is the key, that's the actual card.
The audio or display controller for the same card would be for example: 00:05.1
I don't know if this is fully reliable, but it will have to do, either some cards
as is get missed, or some cards get double id'ed, unless I use a hack like this.
There's nothing else I can find but the bus id to determine that it's the same
physical device or not.
to graphics card detection, that's a new one on me. Dual card systems might use this.
00:02.0 Display controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)
01:00.0 VGA compatible controller: NVIDIA Corporation NV44A [GeForce 6200] (rev a1)
Some more switches to bash native methods as well.
${var} to $var where appropriate to avoid extra overhead of ${..}; removed 'basename'
and replaced with ${path##*/} which avoids unnessary subshells.
Fixed dynamic line wraps on -I and -S lines, now those in most cases will work well
down to 80 cols.
Fixed bug in optical drives, at some point in the last few years, the kernel in /sys
changed the path to the optical drive data, added in /ata8/ (example) so both methods
are now handled. This should fix a lot of failures to show optical drive brand name etc.
Added weechat detection, trying also supybot/limnoria detection in irc client version.
There was weechat-curses, but I guess they finally dropped the -curses. Limnoria is
a fork of supybot but still uses the supybot program name, but added in limnoria too
if they get around to changing that.
More dynamic sizing tweaks, more optimization of code. Discovered that dipping into gawk
is almost 250x more expensive in terms of execution time than using bash variable.
Will change to use bash directly as time goes along where it's safe and accurate.
Added handling to support /run paths using directories, like /run/gdm/gdm.pid for dm data.
time to make it easier to test stuff one by one.
Full refactoring/reordering of top global variables, moved user/maintainer set variables
to top, and clearly identify all globals.
Changed LINE_MAX to COL_MAX but all user configuration files will stay working since
inxi now will check for that and translate them to the new variable names.
New lines fixed, -C cpu and -f cpu plus full flags. Flags output is now fully dynamic to
display screen in terminal/console. Moved cpu short flags to -x because it's not that
important in general and just clutters things up in my opinion.
Print flags/bogomips on separate line if line greater than display width.
The rest of the lines will get a similar treatment, but it takes a bit of trial and error
for each line to get it working right.
Note that IRC line lengths are NOT dyanamic unless I can find a way to determine the column
width of irc clients, but that won't be accurate since fonts vary in widths for each character.
CPU was the worst offender in my opinion in terms of regular output wrapping to new line messily,
next will be the things with ports/chip id/card id.
Tightened up a bit more the dyanamic help / version output handler.
window column width help/version outputs. There is a significant slowdown to achieve this,
but I've optimized it as much as I could so it should be acceptable for most users now.
type if openrc). -xx shows init / rc version number. Change runlevel to target if
systemd and if non numeric runlevel given. Should support systemd/upstart/epoch/runit
sysvinit. Supports openrc as extra data if it's present. Rearranged -I line a bit but
really just exchanged Runlevel: for Init: v: Runlevel: default:
This is the first step, some of the init system ID methods are weak and non robust
and this may need to be revised, but it should for now identify systemd/upstart quite
accurately, and in most cases sysvinit. Note that to get sysvinit version number requires
tool: strings which in debian/ubuntu is in package binutils. I don't know the package names
for arch/fedora/etc for the recommends check tool in inxi yet.
I believe this will be good enough for a first draft version, but over time we'll get it
more fine tuned, but as it is now, it should cover at least 99% of users, which isn't bad.
for adding alternate display servers, like Wayland or Mir. Rather than release all the
stuff at once I'm going to do it bit by bit. Currently I have not found a wayland iso
test cd that boots in virtual box so I will have to wait to really add support there.
to show default runlevel, using systemd/upstart/sysvinit type default tests.
Fixed gtk library version detections, now will support dpkg/pacman version tests, which
should give more data to more people than previously, where the old tests usually would
return null unless gtk dev packages were installed on the system.
and so version numbers failed. Now first trying gnome-session to get version number.
Also, there's a bug in at least gtk detection in opensuse, not sure what it is, they could
be using a different syntax for the test:
pkg-config --modversion gtk+-3.0
returns no such package on gnome 3.10 installs, but I have no idea what package name to
test for there in this case.
So leaving gtk version bugs unhandled due to no user information or feedback, if you want
it fixed or if it works for your distro, let me know and also if it does not work, tell
me the correct commmand, with its output, to get gtk version.
That's for inxi -Sx output that is.
repo type output, the initial listing was not complete of possible syntaxes. Now handles:
Nonfree Updates (Local19) /mnt/data/mirrors/mageia/distrib/cauldron/x86_64/media/nonfree/updates
as well, apparently that is a possible output format in certain cases with urpmq.
Non urpmq distros ignore this update, there are no other actual changes.
Other distros than Mandriva, Mageia, no other changes so no need to update unless you want to.
This adds support for Mandriva, Mageia. urpmq parsing is similar but not identical to pisi.
are actually loaded. Since we can't fix xorg, inxi will try to work around this bug by validating
one step further in the Xorg.0.log data, to confirm that drivers noted as loaded/unloaded/failed are
actually running the display(s) of the system.
There is a possible case of error that might happen due to this change in the case of a system with
a complex xorg that uses two drivers/modules to run two different displays, ie, nvidia on one, and amd
on the other, for example, or intel/nvidia, etc. However, if that bug appears, we'll get that data set
of debugging output and fix it at that point.
This fix repairs an existing xorg bug that is unlikely to get fixed any time soon (the call to load the
detected drivers, eg, vesa, intel, is repeated, causing a failure of driver already loaded on the second
occurance.
so I've updated that. -f for ARM now shows features instead of flags, and the -C regular cpu output does not
show cache/flags for arm cpus becuase they don't have those features.
Added some flags passed to various cpu functions and better detections of ARM cpu to handle dual core and other
issues that were not handled before as well, or at all.
cases. This required fixing some core logic assumptions that are not currently correct, particularly
on two cases, some xeon cpus fail to show core id for each core, showing 0 for all of them, second,
vm cpus do not show physical ids at all for at least intel, nor do they show core id.
While we can't get HT totally reliable, particularly for vm xeon, since inxi has no way to know in
that case if a core is attached to a physical core or a virtual one, all of them being virtual in that
case, but still inxi is now reporting the correct number of cores, or threads in vm xeons, and is not
showing multicore cpus as single core, which was the main issue.
This required redoing the counter logic for the cpu/core/physical arrays, now they are set independently,
and can handle any of the others not being set, without creating an error or failure condition.
Also added in last check for a certain intel case where core id is 0 but > 1 physical cores exist, that
now also shows the correct cpu / core count.
While this is tested on many data sets of proc cpuinfo, it's still possible there is a fringe case I have
not seen that will trigger yet another unexpected behavior.
zypp or yum it will work. If it's both then it will show only one I believe, if that's a possible scenario, no idea.
Added one more fix for those pesky intel vm cpu core errors, now if /proc/cpuinfo shows no siblings at all,
and no core_id, but does have physical id, it will use the count for physical id as a default for core count.
Not perfect, but better than calling a dual core cpu a single core.
There's still a lot of mysteries with vm versions of kvm cpus, for example, if you see a dual core xeon, is
that actually one core with ht, or two cores? There is no way to find that information out that I can see that is
reliable.
/proc/partitions of 253, which made the disk totals fail to show up at all. Added that in.
Moved sourcing of configuration files to right after initialize_data so that some variables
can be forced to different values before the next set of system/app checks.
This is to allow specifically turning off, for some headless servers where $DISPLAY is not
null due to a bash configuration bug, these:
B_SHOW_X_DATA='false'
B_RUNNING_IN_X='false'
Setting those two to false in inxi.conf will turn off all the X checks etc even if the $DISPLAY
is set to non null.
Added in support for ksplice kernel version, requires installed uptrack-uname, if that is
present and if uptrack-name kernel version is different from uname then it will add (ksplice)
to kernel version string, and use ksplice kernel version. Also created a single function
get_kernel_version for use by short form/long form inxi output.
For intel xeon cpus, trying a work around for a bug in /proc/cpuinfo which fails to show core_id
or physical_id for cpus, using siblings / 2 for xeons with no actual core counts.
Fixed a bug that made fixes for multimounted partitions fail for disk used. Added in support
for also excluding single partitions mounted to different places.
That was too hard to type and too hard to remember. Also do more dyanamic reordering of weather
output, depending on how much data is present, and how many x options are used.
Added error handling for generic deprecated options, and for options that do not have the correct
syntax for OPTARG, like with -W.
This should about do it for the weather option for now unless I missed something somewhere.
-! location= option, to indicate that users must replace space with + themselves.
Because of how bash handles these options, inxi cannot add in + signs itself automatically.
This should be closer to cleanup of this new feature.
