diff --git a/inxi b/inxi
index d5cbd98..f026a5f 100755
--- a/inxi
+++ b/inxi
@@ -11538,7 +11538,6 @@ print_graphics_data()
 print_hard_disk_data()
 {
 	eval $LOGFS
-	local b_bsd_debugger='true'
 	local hdd_data='' hdd_data_2='' a_hdd_working='' hdd_temp_data='' hdd_string=''
 	local hdd_serial='' dev_string='/dev/'
 	local dev_data='' size_data='' hdd_model='' usb_data='' hdd_name=''
@@ -11553,7 +11552,7 @@ print_hard_disk_data()
 	IFS="$ORIGINAL_IFS"
 	local hdd_capacity="${a_hdd_basic_working[0]}"
 	local hdd_used=${a_hdd_basic_working[1]}
-	local bsd_unsupported='Hard drive data not yet supported for BSD systems.'
+	local bsd_error="No HDD Info. $FILE_DMESG_BOOT not readable?"
 	local hdd_name_temp='' part_1_data='' part_2_data=''
 	local row_starter="${C1}HDD Total Size$SEP3${C2} $hdd_capacity ($hdd_used) "
 	# in bsd, /dev/wd0c is disk id
@@ -11564,112 +11563,110 @@ print_hard_disk_data()
 	if [[ $B_SHOW_BASIC_DISK == 'true' || $B_SHOW_DISK == 'true' ]];then
 		## note: the output part of this should be in the print hdd data function, not here
 		get_hard_drive_data_advanced
-		for (( i=0; i < ${#A_HDD_DATA[@]} - 1; i++ ))
-		do
-			# this adds the (x) numbering in front of each disk found, and creates the full disk string
-			IFS=","
-			a_hdd_working=( ${A_HDD_DATA[i]} )
-			IFS="$ORIGINAL_IFS"
-			if [[ $B_SHOW_DISK == 'true' ]];then
-				if [[ -n ${a_hdd_working[3]} ]];then
-					usb_data="${a_hdd_working[3]} "
-				else
-					usb_data=''
-				fi
-				size_data=" ${C1}size$SEP3${C2} ${a_hdd_working[1]}"
-				if [[ $B_EXTRA_DATA == 'true' ]];then
-					hdd_temp_data=${a_hdd_working[5]}
-					# error handling is done in get data function
-					if [[ -n $hdd_temp_data ]];then
-						hdd_temp_data=" ${C1}temp$SEP3${C2} ${hdd_temp_data}C"
+		
+		# temporary message to indicate not yet supported
+		if [[ $BSD_TYPE == 'bsd' && -z $Dmesg_Boot_Data ]];then
+			hdd_data=$bsd_error
+			hdd_data=$( create_print_line "$Line_Starter" "$hdd_data" )
+			print_screen_output "$hdd_data"
+			Line_Starter=' '
+		else
+			for (( i=0; i < ${#A_HDD_DATA[@]} - 1; i++ ))
+			do
+				# this adds the (x) numbering in front of each disk found, and creates the full disk string
+				IFS=","
+				a_hdd_working=( ${A_HDD_DATA[i]} )
+				IFS="$ORIGINAL_IFS"
+				if [[ $B_SHOW_DISK == 'true' ]];then
+					if [[ -n ${a_hdd_working[3]} ]];then
+						usb_data="${a_hdd_working[3]} "
 					else
-						hdd_temp_data=''
+						usb_data=''
 					fi
-				fi
-				if [[ $B_EXTRA_EXTRA_DATA == 'true' ]];then
-					hdd_serial=${a_hdd_working[4]}
-					if [[ -z $hdd_serial ]];then
-						hdd_serial='N/A'
+					size_data=" ${C1}size$SEP3${C2} ${a_hdd_working[1]}"
+					if [[ $B_EXTRA_DATA == 'true' ]];then
+						hdd_temp_data=${a_hdd_working[5]}
+						# error handling is done in get data function
+						if [[ -n $hdd_temp_data ]];then
+							hdd_temp_data=" ${C1}temp$SEP3${C2} ${hdd_temp_data}C"
+						else
+							hdd_temp_data=''
+						fi
 					fi
-					hdd_serial=" ${C1}serial$SEP3${C2} $hdd_serial"
+					if [[ $B_EXTRA_EXTRA_DATA == 'true' ]];then
+						hdd_serial=${a_hdd_working[4]}
+						if [[ -z $hdd_serial ]];then
+							hdd_serial='N/A'
+						fi
+						hdd_serial=" ${C1}serial$SEP3${C2} $hdd_serial"
+					fi
+					dev_data="$dev_string${a_hdd_working[0]} "
 				fi
-				dev_data="$dev_string${a_hdd_working[0]} "
-			fi
-			if [[ -n ${a_hdd_working[2]} ]];then
-				hdd_name_temp=${a_hdd_working[2]}
-			else
-				hdd_name_temp='N/A'
-			fi
-			# echo "loop: $i"
-			hdd_name="${C1}model$SEP3${C2} $hdd_name_temp"
-			hdd_string="${C1}ID-$((i+1))$SEP3${C2} $usb_data$dev_data$hdd_name$size_data$hdd_serial$hdd_temp_data"
-			part_1_data="$hdd_model$hdd_string "
-			
-			if [[ $i -eq 0 ]];then
-				if [[ $( calculate_line_length "$row_starter$part_1_data" ) -gt $COLS_INNER ]];then
-					hdd_data=$( create_print_line "$Line_Starter" "$row_starter" )
-					print_screen_output "$hdd_data"
-					#echo 0
-					Line_Starter=' '
-					row_starter=''
-					hdd_data=$( create_print_line "$Line_Starter" "$part_1_data" )
-					print_screen_output "$hdd_data"
-					part_1_data=''
-					#echo 1
+				if [[ -n ${a_hdd_working[2]} ]];then
+					hdd_name_temp=${a_hdd_working[2]}
 				else
+					hdd_name_temp='N/A'
+				fi
+				# echo "loop: $i"
+				hdd_name="${C1}model$SEP3${C2} $hdd_name_temp"
+				hdd_string="${C1}ID-$((i+1))$SEP3${C2} $usb_data$dev_data$hdd_name$size_data$hdd_serial$hdd_temp_data"
+				part_1_data="$hdd_model$hdd_string "
+				
+				if [[ $i -eq 0 ]];then
+					if [[ $( calculate_line_length "$row_starter$part_1_data" ) -gt $COLS_INNER ]];then
+						hdd_data=$( create_print_line "$Line_Starter" "$row_starter" )
+						print_screen_output "$hdd_data"
+						#echo 0
+						Line_Starter=' '
+						row_starter=''
+						hdd_data=$( create_print_line "$Line_Starter" "$part_1_data" )
+						print_screen_output "$hdd_data"
+						part_1_data=''
+						#echo 1
+					else
+						hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_1_data" )
+						print_screen_output "$hdd_data"
+						Line_Starter=' '
+						row_starter=''
+						part_1_data=''
+						#echo 2
+					fi
+				fi
+				if [[ $( calculate_line_length "$row_starter$part_2_data$part_1_data" ) -gt $COLS_INNER ]];then
+					if [[ -n $( grep -vE '^[[:space:]]*$' <<< $part_2_data ) ]];then
+						hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_2_data" )
+						print_screen_output "$hdd_data"
+						#echo 3
+						Line_Starter=' '
+						row_starter=''
+						part_2_data=''
+					fi
 					hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_1_data" )
 					print_screen_output "$hdd_data"
-					Line_Starter=' '
-					row_starter=''
 					part_1_data=''
-					#echo 2
-				fi
-			fi
-			if [[ $( calculate_line_length "$row_starter$part_2_data$part_1_data" ) -gt $COLS_INNER ]];then
-				if [[ -n $( grep -vE '^[[:space:]]*$' <<< $part_2_data ) ]];then
-					hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_2_data" )
+					#echo 4
+				elif [[ -n $part_2_data && \
+						$( calculate_line_length "$row_starter$part_2_data$part_1_data" ) -le $COLS_INNER ]];then
+					hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_2_data$part_1_data" )
 					print_screen_output "$hdd_data"
 					#echo 3
 					Line_Starter=' '
 					row_starter=''
+					part_1_data=''
 					part_2_data=''
+				else
+					part_2_data=$part_1_data
 				fi
-				hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_1_data" )
+			done
+			# then print any leftover items
+			if [[ -n $part_2_data ]];then
+				hdd_data=$( create_print_line "$Line_Starter" "$part_2_data" )
 				print_screen_output "$hdd_data"
-				part_1_data=''
-				#echo 4
-			elif [[ -n $part_2_data && \
-			        $( calculate_line_length "$row_starter$part_2_data$part_1_data" ) -le $COLS_INNER ]];then
-				hdd_data=$( create_print_line "$Line_Starter" "$row_starter$part_2_data$part_1_data" )
-				print_screen_output "$hdd_data"
-				#echo 3
-				Line_Starter=' '
-				row_starter=''
-				part_1_data=''
-				part_2_data=''
-			else
-				part_2_data=$part_1_data
+				#echo 5
 			fi
-		done
-		# then print any leftover items
-		if [[ -n $part_2_data ]];then
-			hdd_data=$( create_print_line "$Line_Starter" "$part_2_data" )
-			print_screen_output "$hdd_data"
-			#echo 5
-		fi
-		# temporary message to indicate not yet supported
-		if [[ $b_bsd_debugger == 'false' && $BSD_TYPE == 'bsd' ]];then
-			hdd_data=$bsd_unsupported
-			hdd_data=$( create_print_line "$Line_Starter" "$hdd_data" )
-			print_screen_output "$hdd_data"
-			Line_Starter=' '
 		fi
 	else
-		# temporary message to indicate not yet supported
 		hdd_data="$row_starter"
-		if [[ $b_bsd_debugger == 'false' && $BSD_TYPE == 'bsd' ]];then
-			hdd_data=$bsd_unsupported
-		fi
 		hdd_data=$( create_print_line "$Line_Starter" "$hdd_data" )
 		print_screen_output "$hdd_data"
 		Line_Starter=' '