New version, new man page. Big update! Get it in before your freeze!!

Bugs:
1. Maybe the vendor/product regex, which when + was used, would put out
errors.
2. Maybe Fix 4, since that could lead to incorrect behavior when sudo
is involved depending on sudo configuration.
3. BIG: current inxi weather will probably fail if not updated to this or
newer versions!! Not an inxi bug per se, but your users will see it as one.

Fixes:
1. Fixed Patriot disk ID.
2. Fixes for PPC board handling.
3. Regex cleaner fixes, this could lead to error in special cases of product
vendor names.
4. crazy from frugalware pointed out that $b_root detection was flawed, and
relied on a bad assumption, particularly for sudo. As usual, he's right, that
is now corrected, and uses $< Perl native to determine UID.

Enhancements:
1. Added septor to Debian system base.
2. Removed quiet filters for downloaders when using --dbg 1, now you see the
entire download action for curl/wget downloads. This went along with
issue # 174
3. New feature: --wan-ip-url. This closed issue #174. Also has user config
option: WAN_IP_URL as well to make changes permanent.
4. Added --dbg 1 to man and help. The other --dbg options are random and can
change, but --dbg 1 is always for downloading, so might as well tell people
about it.
5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org
based robust API. This also allows for a new switch, --weather-source (or --ws
for shorter version), options 0-9, which will trigger different APIs on smxi.org.
Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not
currently active. Also added in better error handling for weather.
The main benefit here is that inxi is now largely agnostic to the weather APIs
used, and those can be changed with no impact to inxi users who are running
frozen pool inxi's, or who have not updated their inxi versions.

NOTE: all inxi versions older than 3.0.31 will probably fail for weather
quite soon. So update your inxi version in your repos!!
6. More disk vendors IDs and matches. Thanks linuxlite hardware database.
7. Going along with weather changes, added, if present, cloud cover, rain, and
snow reports. Those are for previously observed hour.
8. Small change to Intel CPU architecture, taking a guess on stepping for
skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But
could not find this documented, so it's a guess. At worst, it  means that Cascade
lake, which must be a later steppingi than 4, will not be ID'ed as skylake.
9. Documentation updates for data sources.

Changes:
1. inxi now uses a new system to get weather data. There is no longer a risk
of weather failing if the API used locally in inxi fails or goes away. This
change should be largely invisible to casual users.
2. In weather, moved dewpoint to be after humidity, which makes a little more
sense.

inxi

@@ -1,6 +1,6 @@
 #!/usr/bin/env perl
 ## infobash: Copyright (C) 2005-2007  Michiel de Boer aka locsmif
-## inxi: Copyright (C) 2008-2018 Harald Hope
+## inxi: Copyright (C) 2008-2019 Harald Hope
 ##       Additional features (C) Scott Rogers - kde, cpu info
 ## Further fixes (listed as known): Horst Tritremmel <hjt at sidux.com>
 ## Steven Barrett (aka: damentz) - usb audio patch; swap percent used patch
@@ -31,8 +31,8 @@ use POSIX qw(uname strftime ttyname);
 
 ## INXI INFO ##
 my $self_name='inxi';
-my $self_version='3.0.30';
+my $self_version='3.0.31';
-my $self_date='2018-12-31';
+my $self_date='2019-02-06';
 my $self_patch='00';
 ## END INXI INFO ##
 
@@ -72,7 +72,7 @@ $b_fake_bsd,$b_fake_dboot,$b_fake_dmidecode,$b_fake_pciconf,$b_fake_sysctl,
 $b_fake_usbdevs,$b_force_display,$b_gpudata,$b_irc,
 $b_log,$b_log_colors,$b_log_full,$b_man,$b_mem,$b_mips,
 $b_pci,$b_pci_tool,$b_ppc,$b_proc_partitions,$b_ps_gui,
-$b_root,$b_running_in_display,
+$b_root,$b_running_in_display,$b_skip_dig,
 $b_slot_tool,$b_soc_audio,$b_soc_gfx,$b_soc_net,$b_soc_timer,$b_sparc,
 $b_sudo,$b_sysctl,$b_usb,$b_usb_check,$b_usb_sys,$b_usb_tool,$b_wmctrl);
 ## Disk checks
@@ -81,11 +81,11 @@ $b_label_uuid,$b_lsblk,$b_partitions,$b_raid);
 my ($b_sysctl_disk,$b_update,$b_weather) = (1,1,1);
 
 ## System
-my ($bsd_type,$language,$os,$pci_tool,$device_vm) = ('','','','','');
+my ($bsd_type,$device_vm,$language,$os,$pci_tool,$wan_url) = ('','','','','','');
 my ($bits_sys,$cpu_arch);
 my ($cpu_sleep,$dl_timeout,$limit,$ps_cols,$ps_count) = (0.35,4,10,0,5);
 my $sensors_cpu_nu = 0;
-my $weather_unit='mi';
+my ($dl_ua,$weather_source,$weather_unit) = ('s-tools/' . $self_name  . '-',100,'mi');
 
 ## Tools
 my ($display,$ftp_alt,$tty_session);
@@ -218,7 +218,7 @@ sub check_tools {
 		'dmidecode' => {
 		'action' => $action,
 		'missing' => 'Required program dmidecode not available',
-		'permissions' => 'Unable to run dmidecode. Are you root?',
+		'permissions' => 'Unable to run dmidecode. Root privileges required.',
 		'smbios' => 'No SMBIOS data for dmidecode to process',
 		'no-data' => 'dmidecode is not allowed to read /dev/mem',
 		'unknown-error' => 'dmidecode was unable to generate data',
@@ -328,7 +328,6 @@ sub check_tools {
 	}
 	set_fake_tools() if $b_fake_bsd;
 }
-
 # args: 1 - desktop/app command for --version; 2 - search string; 
 # 3 - space print number; 4 - [optional] version arg: -v, version, etc
 # 5 - [optional] exit first find 0/1; 6 - [optional] 0/1 stderr output
@@ -343,7 +342,7 @@ sub set_basics {
 	$b_irc = ( check_program('tty') && system('tty >/dev/null') ) ? 1 : 0;
 	# print "birc: $b_irc\n";
 	$b_display = ( $ENV{'DISPLAY'} ) ? 1 : 0;
-	$b_root = ( $ENV{'HOME'} eq '/root' ) ? 1 : 0;
+	$b_root = $< == 0; # root UID 0, all others > 0
 	$dl{'dl'} = 'curl';
 	$dl{'curl'} = 1;
 	$dl{'tiny'} = 1; # note: two modules needed, tested for in set_downloader
@@ -1084,6 +1083,13 @@ sub get_config_item {
 	elsif ($key eq 'SENSORS_CPU_NO') {$sensors_cpu_nu = $val if is_int($val)}
 	elsif ($key eq 'SHOW_HOST' || $key eq 'B_SHOW_HOST') { $show{'host'} = $val if is_int($val)}
 	elsif ($key eq 'USB_SYS') {$b_usb_sys = $val if is_int($val)}
+	elsif ($key eq 'WAN_IP_URL') {
+		if ($val =~ /^(ht|f)tp[s]?:\//i){
+			$wan_url = $val;
+			$b_skip_dig = 1;
+		}
+	}
+	elsif ($key eq 'WEATHER_SOURCE') {$weather_source = $val if is_int($val)}
 	elsif ($key eq 'WEATHER_UNIT') { 
 		$val = lc($val) if $val;
 		if ($val && $val =~ /^(c|f|cf|fc|i|m|im|mi)$/){
@@ -2152,10 +2158,11 @@ sub user_debug_test_1 {
 #### -------------------------------------------------------------------
 
 sub download_file {
-	my ($type, $url, $file) = @_;
+	my ($type, $url, $file,$ua) = @_;
 	my ($cmd,$args,$timeout) = ('','','');
 	my $debug_data = '';
 	my $result = 1;
+	$ua = ($ua && $dl{'ua'}) ? $dl{'ua'} . $ua : '';
 	$dl{'no-ssl-opt'} ||= '';
 	$dl{'spider'} ||= '';
 	$file ||= 'N/A'; # to avoid debug error
@@ -2176,22 +2183,23 @@ sub download_file {
 	}
 	# But: 0 is success, and 1 is false for these
 	# when strings are returned, they will be taken as true
+	# urls must be " quoted in case special characters present
 	else {
 		if ($type eq 'stdout'){
 			$args = $dl{'stdout'};
-			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $args $url $dl{'null'}";
+			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $ua $timeout $args \"$url\" $dl{'null'}";
 			$result = qx($cmd);
 			$debug_data = ($result) ? 'Success: stdout data not null.' : 'Download resulted in null data!';
 		}
 		elsif ($type eq 'file') {
 			$args = $dl{'file'};
-			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $args $file $url $dl{'null'}";
+			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $ua $timeout $args $file \"$url\" $dl{'null'}";
 			system($cmd);
 			$result = ($?) ? 0 : 1; # reverse these into Perl t/f
 			$debug_data = $result;
 		}
 		elsif ( $dl{'dl'} eq 'wget' && $type eq 'spider'){
-			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $timeout $dl{'spider'} $url";
+			$cmd = "$dl{'dl'} $dl{'no-ssl-opt'} $ua $timeout $dl{'spider'} \"$url\"";
 			system($cmd);
 			$result = ($?) ? 0 : 1; # reverse these into Perl t/f
 			$debug_data = $result;
@@ -2247,6 +2255,7 @@ sub get_file {
 
 sub set_downloader {
 	eval $start if $b_log;
+	my $quiet = '';
 	$dl{'no-ssl'} = '';
 	$dl{'null'} = '';
 	$dl{'spider'} = '';
@@ -2271,25 +2280,30 @@ sub set_downloader {
 		$dl{'timeout'} = '';
 	}
 	elsif ( $dl{'curl'} && check_program('curl')  ){
+		$quiet = '-s ' if !$test[1];
 		$dl{'dl'} = 'curl';
-		$dl{'file'} = '  -L -s -o ';
+		$dl{'file'} = "  -L ${quiet}-o ";
 		$dl{'no-ssl'} = ' --insecure';
-		$dl{'stdout'} = ' -L -s ';
+		$dl{'stdout'} = " -L ${quiet}";
 		$dl{'timeout'} = ' -y ';
+		$dl{'ua'} = ' -A ' . $dl_ua;
 	}
 	elsif ($dl{'wget'} && check_program('wget') ){
+		$quiet = '-q ' if !$test[1];
 		$dl{'dl'} = 'wget';
-		$dl{'file'} = ' -q -O ';
+		$dl{'file'} = " ${quiet}-O ";
 		$dl{'no-ssl'} = ' --no-check-certificate';
-		$dl{'spider'} = ' -q --spider';
+		$dl{'spider'} = " ${quiet}--spider";
-		$dl{'stdout'} = '  -q -O -';
+		$dl{'stdout'} = " $quiet -O -";
 		$dl{'timeout'} = ' -T ';
+		$dl{'ua'} = ' -U ' . $dl_ua;
 	}
 	elsif ($dl{'fetch'} && check_program('fetch')){
+		$quiet = '-q ' if !$test[1];
 		$dl{'dl'} = 'fetch';
-		$dl{'file'} = ' -q -o ';
+		$dl{'file'} = " ${quiet}-o ";
 		$dl{'no-ssl'} = ' --no-verify-peer';
-		$dl{'stdout'} = ' -q -o -';
+		$dl{'stdout'} = " ${quiet}-o -";
 		$dl{'timeout'} = ' -T ';
 	}
 	elsif ( $bsd_type eq 'openbsd' && check_program('ftp') ){
@@ -3683,7 +3697,7 @@ sub update_man {
 		return 0;
 	}
 	if ( ! -w $man_file_location ){
-		print "Cannot write to $man_file_location! Are you root?\n";
+		print "Cannot write to $man_file_location! Root privileges required.\n";
 		print "Unable to continue: $man_file_location\n";
 		return 0;
 	}
@@ -4056,6 +4070,16 @@ sub get_options{
 		else {
 			error_handler('distro-block', $opt);
 		} },
+	'ws|weather-source:s' => sub {
+		my ($opt,$arg) = @_;
+		# let api processor handle checks if valid, this
+		# future proofs this
+		if ($arg =~ /^[0-9]$/){
+			$weather_source = $arg;
+		}
+		else {
+			error_handler('bad-arg',$opt,$arg);
+		} },
 	'weather-unit:s' => sub {
 		my ($opt,$arg) = @_;
 		$arg ||= '';
@@ -4325,6 +4349,15 @@ sub get_options{
 		$b_usb_tool = 1 },
 	'V|version' => sub { 
 		$b_version = 1 },
+	'wan-ip-url:s' => sub {
+		my ($opt,$arg) = @_;
+		if ($arg && $arg =~ /^(f|ht)tp[s]?:\/\//){
+			$wan_url = $arg;
+			$b_skip_dig = 1
+		}
+		else {
+			error_handler('bad-arg', $opt, $arg);
+		}},
 	'wm' => sub { 
 		$b_wmctrl = 1 },
 	'<>' => sub {
@@ -4334,7 +4367,7 @@ sub get_options{
 	## run all these after so that we can change widths, downloaders, etc
 	eval $end if $b_log;
 	CheckRecommends::run() if $b_recommends;
-	set_downloader() if $b_downloader;
+	set_downloader() if $b_downloader || $wan_url; # sets for either config or arg here
 	show_version() if $b_version;
 	show_options() if $b_help;
 	$b_man = 0 if (!$b_use_man || $b_no_man_force);
@@ -4519,10 +4552,13 @@ sub show_options {
 		['1', '-w', '--weather', "Local weather data/time. To check an alternate
 		location, see -W."],
 		['1', '-W', '--weather-location', "[location] Supported options for 
-		[location]: postal code; city, state/country; latitude, longitude. 
+		[location]: postal code[,country]; city, state/country; latitude, longitude. 
 		Only use if you want the weather somewhere other than the machine running
 		$self_name. Use only ASCII characters, replace spaces in city/state/country 
 		names with '+'. Example:^$self_name^-W^new+york,ny"],
+		['1', '', '--weather-source', "[0-9] Change weather data source. 0 uses
+		a legacy source internally. 1-3 use remote smxi sources. 4-9 may be added
+		in the future. See man."],
 		['1', '', '--weather-unit', "Set weather units to metric (m), imperial (i), 
 		metric/imperial (mi), or imperial/metric (im)."],
 		);
@@ -4567,7 +4603,7 @@ sub show_options {
 	push @data, @rows;
 	if ( $b_weather ){
 		@rows = (['2', '-w -W', '', "Wind speed and direction, humidity, pressure, 
-		and (-w only) time zone." ]);
+		and time zone, if available." ]);
 		push @data, @rows;
 	}
 	@rows = (
@@ -4598,7 +4634,8 @@ sub show_options {
 	);
 	push @data, @rows;
 	if ( $b_weather ){
-		@rows = (['2', '-w -W', '', "Wind chill, dew point, heat index, if available." ]);
+		@rows = (['2', '-w -W', '', "Snow, rain (last observed hour), cloud cover, 
+		wind chill, dew point, heat index, if available." ]);
 		push @data, @rows;
 	}
 	@rows = (
@@ -4627,7 +4664,7 @@ sub show_options {
 	push @data, @rows;
 	if ( $b_weather ){
 		@rows = (['2', '-w -W', '', "Location (uses -z/irc filter), weather observation 
-		time, altitude (shows extra lines for data where relevant)." ] );
+		time, altitude, if available." ] );
 		push @data, @rows;
 	}
 	@rows = (
@@ -4714,9 +4751,14 @@ sub show_options {
 	you want a specific output width. Always put this option first in an option list."],
 	['1', '', '--usb-sys', "Force USB data to use /sys as data source (Linux only)." ],
 	['1', '', '--usb-tool', "Force USB data to use lsusb as data source (Linux only)." ],
+	['1', '', '--wan-ip-url', "[URL] Skips dig, uses supplied URL for WAN IP (-i). 
+	URL output must end in the IP address. See man. 
+	Example:^$self_name^-i^--wan-ip-url^https://yoursite.com/ip.php" ],
 	['1', '', '--wm', "Force wm: to use wmctrl as data source. Default uses ps." ],
 	['0', '', '', $line ],
 	['0', '', '', "Debugging Options:" ],
+	['1', '', '--dbg', "Specific debuggers, change often. Only 1 is constant:" ],
+	['2', '1', '', "Show downloader output. Turns off quiet mode." ],
 	['1', '', '--debug', "Triggers debugging modes." ],
 	['2', '1-3', '', "On screen debugger output." ],
 	['2', '10', '', "Basic logging." ],
@@ -5404,7 +5446,7 @@ sub row_defaults {
 	'root-required' => "<root required>",
 	'sensors-data-ipmi' => "No ipmi sensors data was found.",
 	'sensors-data-linux' => "No sensors data was found. Is sensors configured?",
-	'sensors-ipmi-root' => "Unable to run ipmi sensors. Are you root?",
+	'sensors-ipmi-root' => "Unable to run ipmi sensors.  Root privileges required.",
 	'tool-missing' => "<missing $id>",
 	'unmounted-data' => "No unmounted partitions found.",
 	'unmounted-data-bsd' => "No unmounted partition data found for this BSD system.",
@@ -5413,6 +5455,7 @@ sub row_defaults {
 	'unknown-desktop-version' => "ERR-101",
 	'unknown-dev' => "ERR-102",
 	'unknown-shell' => "ERR-100",
+	'weather-error' => "Error in weather data: $id",
 	'weather-null' => "No $id found. Internet connection working?",
 	'xdpyinfo-missing' => '<xdpyinfo missing>',
 	);
@@ -7883,7 +7926,11 @@ sub cpu_arch {
 			elsif ( $model =~ /^(3A|3E)$/ ) {$arch = 'Ivy Bridge'}
 			elsif ( $model =~ /^(3C|3F|45|46)$/ ) {$arch = 'Haswell'}
 			elsif ( $model =~ /^(3D|47|4F|56)$/ ) {$arch = 'Broadwell'}
-			elsif ( $model =~ /^(4E|55)$/ ) {$arch = 'Skylake'} # had 9E
+			elsif ( $model =~ /^(4E)$/ ) {$arch = 'Skylake'} # had 9E, cascade lake also 55
+			# need to find stepping for cl, guessing stepping 4 is last for sl
+			elsif ( $model =~ /^(55)$/ ) {
+				if ($stepping > 4){$arch = 'Cascade Lake'}
+				else {$arch = 'Skylake'} }
 			elsif ( $model =~ /^(5C|5F)$/ ) {$arch = 'Goldmont'}
 			elsif ( $model =~ /^(5E)$/ ) {$arch = 'Skylake-S'}
 			elsif ( $model =~ /^(4C)$/ ) {$arch = 'Airmont'}
@@ -7896,9 +7943,9 @@ sub cpu_arch {
 			elsif ( $model =~ /^(57)$/ ) {$arch = 'Knights Landing'}
 			elsif ( $model =~ /^(66)$/ ) {$arch = 'Cannon Lake'}
 			elsif ( $model =~ /^(85)$/ ) {$arch = 'Knights Mill'}
-			elsif ( $model =~ /^(865)$/ ) {$arch = 'Tremont'}
+			elsif ( $model =~ /^(86)$/ ) {$arch = 'Tremont'}
 			# coming: alder lake; amber lake; cannonlake; cascade lake; coffee lake;  
-			# granite rapids; icelake; meteor lake; saphire rapids; tigerlake, 
+			# cooper lake; granite rapids; icelake; meteor lake; saphire rapids; tigerlake, 
 		}
 		# itanium 1 family 7 all recalled
 		elsif ($family eq 'B'){
@@ -8678,7 +8725,7 @@ sub device_vendor {
 	## These go first because they are the most likely and common ##
 	['(Crucial|^(FC)?CT|-CT|^M4\b)','Crucial','Crucial',''],
 	['^(INTEL|SSD(PAM|SA2))','^INTEL','Intel',''],
-	['(KINGSTON|DataTraveler|^SMS|^SHS|^SUV|^Ultimate CF)','KINGSTON','Kingston',''], # maybe SHS: SHSS37A SKC SUV
+	['(KINGSTON|DataTraveler|DT\s?(DUO|Microduo|101)|^SMS|^SHS|^SUV|^Ultimate CF)','KINGSTON','Kingston',''], # maybe SHS: SHSS37A SKC SUV
 	# must come before samsung MU. NOTE: toshiba can have: TOSHIBA_MK6475GSX: mush: MKNSSDCR120GB_
 	['(^MKN|Mushkin)','Mushkin','Mushkin',''], # MKNS
 	# MU = Multiple_Flash_Reader too risky: |M[UZ][^L] HD103SI HD start risky
@@ -8697,14 +8744,14 @@ sub device_vendor {
 	['^ATP','^ATP[\s\-]','ATP',''],
 	# Force MP500
 	['^(Corsair|Force\s|Voyager)','^Corsair','Corsair',''],
-	['^(FUJITSU|MHV|MP)','^FUJITSU','Fujitsu',''],
+	['^(FUJITSU|MH[VY]|MP)','^FUJITSU','Fujitsu',''],
 	# note: 2012:  wdc bought hgst
-	['^(HGST|Touro)','^HGST','HGST (Hitachi)',''], # HGST HUA
+	['^(HGST|Touro|5450)','^HGST','HGST (Hitachi)',''], # HGST HUA
 	['^(Hitachi|HD[ST]|DK[0-9]|IC|HT|HU)','^Hitachi','Hitachi',''], 
 	['^Hoodisk','^Hoodisk','Hoodisk',''],
 	# vb: VB0250EAVER but clashes with vbox; HP_SSD_S700_120G ;GB0500EAFYL GB starter too generic?
 	['^(HP\b|MB0|G[BJ]0|v[0-9]{3}[ow])','^HP','HP',''], 
-	['^(LSD|Lexar|JumpDrive)','^Lexar','Lexar',''], # mmc-LEXAR_0xb016546c
+	['^(LSD|Lexar|JumpDrive|JD\s?Firefly)','^Lexar','Lexar',''], # mmc-LEXAR_0xb016546c; JD Firefly;
 	# OCZSSD2-2VTXE120G is OCZ-VERTEX2_3.5
 	['^(OCZ|APOC|D2|DEN|DEN|DRSAK|EC188|FTNC|GFGC|MANG|MMOC|NIMC|NIMR|PSIR|TALOS2|TMSC|TRSAK)','^OCZ[\s\-]','OCZ',''],
 	['^OWC','^OWC[\s\-]','OWC',''],
@@ -8729,6 +8776,9 @@ sub device_vendor {
 	['^CHN\b','','Zheino',''],
 	['^Colorful\b','^Colorful','Colorful',''],
 	['^CSD','^CSD','CSD',''],
+	['^(Dane-?Elec|Z Mate)','^Dane-?Elec','DaneElec',''],
+	# Daplink vfs is an ARM software thing
+	['^DeLOCK','^Delock(\s?products)?','Delock',''],
 	['^DGM','^DGM\b','DGM',''],
 	['^DIGITAL\s?FILM','DIGITAL\s?FILM','Digital Film',''],
 	['^DREVO\b','^DREVO','Drevo',''],
@@ -8746,7 +8796,7 @@ sub device_vendor {
 	['^Gigabyte','^Gigabyte','Gigabyte',''], # SSD
 	['^Gigastone','^Gigastone','Gigastone',''],
 	['^Gloway','^Gloway','Gloway',''],
-	['^GOODRAM','^GOODRAM','GOODRAM',''],
+	['^(GOODRAM|IR SSD)','^GOODRAM','GOODRAM',''],
 	# supertalent also has FM: |FM
 	['^(G[\.]?SKILL)','^G[\.]?SKILL','G.SKILL',''],
 	['^HUAWEI','^HUAWEI','Huawei',''],
@@ -8818,6 +8868,7 @@ sub device_vendor {
 	['^(TDK|TF[1-9][0-9])','^TDK','TDK',''],
 	['^TEAC','^TEAC','TEAC',''],
 	['^TEAM','^TEAM( Group)?','Team',''],
+	['^Tigo','^Tigo','Tigo',''],
 	['^TopSunligt','^TopSunligt','TopSunligt',''], # is this a typo? hard to know
 	['^TopSunlight','^TopSunlight','TopSunlight',''],
 	['^(TS|Transcend|JetFlash)','^Transcend','Transcend',''],
@@ -9944,7 +9995,7 @@ sub machine_data_soc {
 				$temp[1] = main::dmi_cleaner($temp[1]);
 				$soc_machine{'device'} = main::cleaner($temp[1]);
 			}
-			elsif (/^(system type)\s*:/i){
+			elsif (/^(system type|model)\s*:/i){
 				@temp = split /\s*:\s*/, $_;
 				$temp[1] = main::dmi_cleaner($temp[1]);
 				$soc_machine{'model'} = main::cleaner($temp[1]);
@@ -10743,19 +10794,22 @@ sub if_ip {
 # dig +short +time=1 +tries=1 myip.opendns.com. A @208.67.222.222
 sub wan_ip {
 	eval $start if $b_log;
-	my (@data,$ip);
+	my (@data,$ip,$ua);
 	my $num = 0;
 	# time: 0.06 - 0.07 seconds
-	if (my $program = main::check_program('dig')){
+	if (!$b_skip_dig && (my $program = main::check_program('dig') )){
 		$ip = (main::grabber("$program +short +time=1 +tries=1 myip.opendns.com \@resolver1.opendns.com 2>/dev/null"))[0];
 	}
 	else {
 		# note: tests: akamai: 0.055 - 0.065 icanhazip.com: 0.177 0.164
 		# smxi: 0.525, so almost 10x slower. Dig is fast too
 		# leaving smxi as last test because I know it will always be up.
-		my @urls = qw( http://whatismyip.akamai.com/ http://icanhazip.com/ https://smxi.org/opt/ip.php);
+		# --wan-ip-url replaces values with user supplied arg
+		my @urls = (!$wan_url) ? qw( http://whatismyip.akamai.com/ 
+		 http://icanhazip.com/ https://smxi.org/opt/ip.php) : ($wan_url);
 		foreach (@urls){
-			$ip = main::download_file('stdout',$_);
+			$ua = 'ip' if $_ =~ /smxi/;
+			$ip = main::download_file('stdout',$_,'',$ua);
 			if ($ip){
 				# print "$_\n";
 				chomp $ip;
@@ -15302,7 +15356,7 @@ sub get {
 sub create_output {
 	eval $start if $b_log;
 	my $num = 0;
-	my (@data,@location,@rows,%weather,);
+	my (@data,@location,@rows,$value,%weather,);
 	my ($conditions) = ('NA');
 	if ($show{'weather-location'}){
 		my $location_string;
@@ -15331,6 +15385,11 @@ sub create_output {
 		}
 	}
 	%weather = get_weather(@location);
+	if ($weather{'error'}) {
+		return @rows = ({
+		main::key($num++,'Message') => main::row_defaults('weather-error',$weather{'error'}),
+		});
+	}
 	if (!$weather{'weather'}) {
 		return @rows = ({
 		main::key($num++,'Message') => main::row_defaults('weather-null','weather data'),
@@ -15348,33 +15407,54 @@ sub create_output {
 		my $wind = wind_output($weather{'wind'},$weather{'wind-direction'},$weather{'wind-mph'},$weather{'wind-ms'},
 		$weather{'wind-gust-mph'},$weather{'wind-gust-ms'});
 		$rows[0]{main::key($num++,'Wind')} = $wind;
-		$rows[0]{main::key($num++,'Humidity')} = $weather{'humidity'};
+		if ($extra > 1){
+			if (defined $weather{'cloud-cover'}){
+				$rows[0]{main::key($num++,'Cloud Cover')} = $weather{'cloud-cover'} . '%';
+			}
+			if ($weather{'rain-1h-mm'} && defined $weather{'rain-1h-in'} ){
+				$value = unit_output('',$weather{'rain-1h-mm'},'mm',$weather{'rain-1h-in'},'in');
+				$rows[0]{main::key($num++,'Rain')} = $value;
+			}
+			if ($weather{'snow-1h-mm'} && defined $weather{'snow-1h-in'} ){
+				$value = unit_output('',$weather{'snow-1h-mm'},'mm',$weather{'snow-1h-in'},'in');
+				$rows[0]{main::key($num++,'Snow')} = $value;
+			}
+		}
+		$rows[0]{main::key($num++,'Humidity')} = $weather{'humidity'} . '%';
+		if ($extra > 1){
+			if ($weather{'dewpoint'} || (defined $weather{'dewpoint-c'} && defined $weather{'dewpoint-f'})){
+				$value = unit_output($weather{'dewpoint'},$weather{'dewpoint-c'},'C',$weather{'dewpoint-f'},'F');
+				$rows[0]{main::key($num++,'Dew Point')} = $value;
+			}
+		}
 		$rows[0]{main::key($num++,'Pressure')} = $pressure;
 	}
 	if ($extra > 1){
-		if ($weather{'heat-index'}){
+		if ($weather{'heat-index'} || (defined $weather{'heat-index-c'} && defined $weather{'heat-index-f'})){
-			my $heat = unit_output($weather{'heat-index'},$weather{'heat-index-c'},'C',$weather{'heat-index-f'},'F');
+			$value = unit_output($weather{'heat-index'},$weather{'heat-index-c'},'C',$weather{'heat-index-f'},'F');
-			$rows[0]{main::key($num++,'Heat Index')} = $heat;
+			$rows[0]{main::key($num++,'Heat Index')} = $value;
 		}
-		if ($weather{'windchill'}){
+		if ($weather{'windchill'} || (defined $weather{'windchill-c'} && defined $weather{'windchill-f'})){
-			my $chill = unit_output($weather{'windchill'},$weather{'windchill-c'},'C',$weather{'windchill-f'},'F');
+			$value = unit_output($weather{'windchill'},$weather{'windchill-c'},'C',$weather{'windchill-f'},'F');
-			$rows[0]{main::key($num++,'Wind Chill')} = $chill ;
+			$rows[0]{main::key($num++,'Wind Chill')} = $value;
-		}
-		if ($weather{'dewpoint'}){
-			my $dew = unit_output($weather{'dewpoint'},$weather{'dewpoint-c'},'C',$weather{'dewpoint-f'},'F');
-			$rows[0]{main::key($num++,'Dew Point')} = $dew;
 		}
 	}
 	if ($extra > 2){
 		if (!$show{'filter'}){
-			$rows[0]{main::key($num++,'Location')} = $location[1];
+			$rows[0]{main::key($num++,'Location')} = complete_location($location[1],$weather{'city'},$weather{'state'},$weather{'country'});
+			if ($weather{'elevation-m'} || $weather{'elevation-ft'}){
 				$rows[0]{main::key($num++,'altitude')} = elevation_output($weather{'elevation-m'},$weather{'elevation-ft'});
 			}
 		}
+	}
 	$rows[0]{main::key($num++,'Current Time')} = $weather{'date-time'};
 	if ($extra > 2){
+		$weather{'observation-time-local'} = 'N/A' if !$weather{'observation-time-local'};
 		$rows[0]{main::key($num++,'Observation Time')} = $weather{'observation-time-local'};
 	}
+	if ($weather{'api-source'}){
+		$rows[0]{main::key($num++,'Source')} = $weather{'api-source'};
+	}
 	eval $end if $b_log;
 	return @rows;
 }
@@ -15407,16 +15487,16 @@ sub unit_output {
 	eval $start if $b_log;
 	my ($primary,$metric,$m_unit,$imperial,$i_unit) = @_;
 	my $result = '';
-	if ($metric && $imperial && $weather_unit eq 'mi' ){
+	if (defined $metric && defined $imperial && $weather_unit eq 'mi' ){
 		$result = "$metric $m_unit ($imperial $i_unit)";
 	}
-	elsif ($metric && $imperial && $weather_unit eq 'im' ){
+	elsif (defined $metric && defined $imperial && $weather_unit eq 'im' ){
 		$result = "$imperial $i_unit ($metric $m_unit)";
 	}
-	elsif ($metric && $weather_unit eq 'm' ){
+	elsif (defined $metric && $weather_unit eq 'm' ){
 		$result = "$metric $m_unit";
 	}
-	elsif ($imperial && $weather_unit eq 'i' ){
+	elsif (defined $imperial && $weather_unit eq 'i' ){
 		$result = "$imperial $i_unit";
 	}
 	elsif ($primary){
@@ -15495,48 +15575,33 @@ sub get_weather {
 	my $loc_name = lc($location[0]);
 	$loc_name =~ s/-\/|\s|,/-/g;
 	$loc_name =~ s/--/-/g;
-	my $file_cached = "$user_data_dir/weather-$loc_name.txt";
+	my $file_cached = "$user_data_dir/weather-$loc_name-$weather_source.txt";
 	if (-f $file_cached){
 		@weather_data = main::reader($file_cached);
 		$freshness = (split /\^\^/, $weather_data[0])[1];
 		#print "$now:$freshness\n";
 	}
 	if (!$freshness || $freshness < ($now - 90) ) {
-		@weather_data = (); # reset so we don't write the previous data to file!!
+		@weather_data = download_weather($now,$file_cached,@location);
-		my $url = "http://api.wunderground.com/auto/wui/geo/WXCurrentObXML/index.xml?query=$location[0]";
- 		my $temp;
-# 		{
-# 			#my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
-# 			# my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/feed-oslo-1.xml";
-# 			local $/;
-# 			my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
-# 			open my $fh, '<', $file or die "can't open $file: $!";
-# 			$temp = <$fh>;
-# 		}
- 		$temp = main::download_file('stdout',$url);
-		$temp =~ s/\r|\n\n/\n/g;
-		my @weather_temp = split /\n/, $temp;
-		foreach (@weather_temp){
-			chomp $_;
-			$_ =~ s/<\/[^>]+>//;
-			$_ =~ s/.*icon.*|\r//g;
-			$_ =~ s/\s\s/ /g;
-			$_ =~ s/^\s+|\s+$//g;
-			$_ =~ s/>/^^/;
-			$_ =~ s/^<|NA$//g;
-			$_ =~ s/^(current|credit|terms|image|title|link|.*_url).*//;
-			push @weather_data, $_ if $_ !~ /^\s*$/;
-		}
-		unshift (@weather_data,("timestamp^^$now"));
-		main::writer($file_cached,\@weather_data);
-		#print "$file_cached: download/cleaned\n";
 	}
 	#print join "\n", @weather_data, "\n";
 	# NOTE: because temps can be 0, we can't do if value tests
 	foreach (@weather_data){
 		my @working = split /\s*\^\^\s*/,$_;
 		next if ! defined $working[1] || $working[1] eq '';
-		if ( $working[0] eq 'dewpoint_string' ){
+		if ( $working[0] eq 'api_source' ){
+			$weather{'api-source'} = $working[1];
+		}
+		elsif ( $working[0] eq 'city' ){
+			$weather{'city'} = $working[1];
+		}
+		elsif ( $working[0] eq 'cloud_cover' ){
+			$weather{'cloud-cover'} = $working[1];
+		}
+		elsif ( $working[0] eq 'country' ){
+			$weather{'country'} = $working[1];
+		}
+		elsif ( $working[0] eq 'dewpoint_string' ){
 			$weather{'dewpoint'} = $working[1];
 			$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
 			$weather{'dewpoint-c'} = $2;;
@@ -15548,12 +15613,15 @@ sub get_weather {
 		elsif ( $working[0] eq 'dewpoint_f' ){
 			$weather{'dewpoint-f'} = $working[1];
 		}
-		# there are two elevations, we want the first one
+		# WU: there are two elevations, we want the first one
 		elsif (!$weather{'elevation-m'} && $working[0] eq 'elevation'){
 			# note: bug in source data uses ft for meters, not 100% of time, but usually
 			$weather{'elevation-m'} = $working[1];
 			$weather{'elevation-m'} =~ s/\s*(ft|m).*$//;
 		}
+		elsif ( $working[0] eq 'error' ){
+			$weather{'error'} = $working[1];
+		}
 		elsif ( $working[0] eq 'heat_index_string' ){
 			$weather{'heat-index'} = $working[1];
 			$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
@@ -15567,6 +15635,7 @@ sub get_weather {
 			$weather{'heat-index-f'} = $working[1];
 		}
 		elsif ( $working[0] eq 'relative_humidity' ){
+			$working[1] =~ s/%$//;
 			$weather{'humidity'} = $working[1];
 		}
 		elsif ( $working[0] eq 'local_time' ){
@@ -15576,7 +15645,7 @@ sub get_weather {
 			$weather{'local-epoch'} = $working[1];
 		}
 		elsif ( $working[0] eq 'observation_time_rfc822' ){
-			$weather{'observation-time-gmt'} = $working[1];
+			$weather{'observation-time-rfc822'} = $working[1];
 		}
 		elsif ( $working[0] eq 'observation_epoch' ){
 			$weather{'observation-epoch'} = $working[1];
@@ -15594,6 +15663,21 @@ sub get_weather {
 		elsif ( $working[0] eq 'pressure_in' ){
 			$weather{'pressure-in'} = $working[1];
 		}
+		elsif ( $working[0] eq 'rain_1h_mm' ){
+			$weather{'rain-1h-mm'} = $working[1];
+		}
+		elsif ( $working[0] eq 'rain_1h_in' ){
+			$weather{'rain-1h-in'} = $working[1];
+		}
+		elsif ( $working[0] eq 'snow_1h_mm' ){
+			$weather{'snow-1h-mm'} = $working[1];
+		}
+		elsif ( $working[0] eq 'snow_1h_in' ){
+			$weather{'snow-1h-in'} = $working[1];
+		}
+		elsif ( $working[0] eq 'state_name' ){
+			$weather{'state'} = $working[1];
+		}
 		elsif ( $working[0] eq 'temperature_string' ){
 			$weather{'temp'} = $working[1];
 			$working[1] =~ /^([0-9\.]+)\sF\s\(([0-9\.]+)\sC\)/;
@@ -15609,6 +15693,9 @@ sub get_weather {
 		elsif ( $working[0] eq 'temp_c' ){
 			$weather{'temp-c'} = $working[1];
 		}
+		elsif ( $working[0] eq 'timezone' ){
+			$weather{'timezone'} = $working[1];
+		}
 		elsif ( $working[0] eq 'visibility' ){
 			$weather{'visibility'} = $working[1];
 		}
@@ -15656,14 +15743,26 @@ sub get_weather {
 		}
 	}
 	if ($show{'weather-location'}){
-		$weather{'observation-time-local'} =~ /^(.*)\s([\S]+)$/;
+		if ($weather{'observation-time-local'} && 
+		 $weather{'observation-time-local'} =~ /^(.*)\s([a-z_]+\/[a-z_]+)$/i){
 			$tz = $2;
+		}
+		if (!$tz && $weather{'timezone'}){
+			$tz = $weather{'timezone'};
+			$weather{'observation-time-local'} .= ' (' . $weather{'timezone'} . ')' if $weather{'observation-time-local'};
+		}
 		# very clever trick, just make the system think it's in the 
 		# remote timezone for this local block only
-		local $ENV{'TZ'} = $tz; 
+		local $ENV{'TZ'} = $tz if $tz; 
 		$date_time = POSIX::strftime "%c", localtime();
 		$date_time = test_local_date($date_time,'','');
 		$weather{'date-time'} = $date_time;
+		# only wu has rfc822 value, and we want the original observation time then
+		if ($weather{'observation-epoch'} && $tz){
+			$date_time = POSIX::strftime "%Y-%m-%d %T ($tz %z)", localtime($weather{'observation-epoch'});
+			$date_time = test_local_date($date_time,$show{'weather-location'},$weather{'observation-epoch'});
+			$weather{'observation-time-local'} = $date_time;
+		}
 	}
 	else {
 		$date_time = POSIX::strftime "%c", localtime();
@@ -15680,6 +15779,50 @@ sub get_weather {
 	return %weather;
 	eval $end if $b_log;
 }
+sub download_weather {
+	eval $start if $b_log;
+	my ($now,$file_cached,@location) = @_;
+	my (@weather,@weather_temp,$temp,$ua,$url);
+	if ($weather_source == 0){
+		$url = "http://api.wunderground.com/auto/wui/geo/WXCurrentObXML/index.xml?query=$location[0]";
+	}
+	else {
+		$url = "https://smxi.org/opt/xr2.php?loc=$location[0]&src=$weather_source";
+	}
+	$ua = 'weather' if $url =~ /smxi/;
+# 		{
+# 			#my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
+# 			# my $file2 = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/feed-oslo-1.xml";
+# 			local $/;
+# 			my $file = "$ENV{'HOME'}/bin/scripts/inxi/data/weather/weather-1.xml";
+# 			open my $fh, '<', $file or die "can't open $file: $!";
+# 			$temp = <$fh>;
+# 		}
+	$temp = main::download_file('stdout',$url,'',$ua);
+	$temp =~ s/\r|\n\n/\n/g if $weather_source == 0;
+	@weather_temp = split /\n/, $temp;
+	if ($weather_source == 0){
+		foreach (@weather_temp){
+			chomp $_;
+			$_ =~ s/<\/[^>]+>//;
+			$_ =~ s/.*icon.*|\r//g;
+			$_ =~ s/\s\s/ /g;
+			$_ =~ s/^\s+|\s+$//g;
+			$_ =~ s/>/^^/;
+			$_ =~ s/^<|NA$//g;
+			$_ =~ s/^(current|credit|terms|image|title|link|.*_url).*//;
+			push @weather, $_ if $_ !~ /^\s*$/;
+		}
+	}
+	else {
+		@weather = @weather_temp;
+	}
+	unshift (@weather,("timestamp^^$now"));
+	main::writer($file_cached,\@weather);
+	#print "$file_cached: download/cleaned\n";
+	eval $end if $b_log;
+	return @weather;
+}
 # resolve wide character issue, if detected, switch to iso 
 # date format, we won't try to be too clever here.
 sub test_local_date {
@@ -15694,6 +15837,7 @@ sub test_local_date {
 			$date_time = POSIX::strftime "%Y-%m-%d %H:%M:%S", localtime();
 		}
 	}
+	$date_time =~ s/\s+$//;
 	#print "2: $date_time\n";
 	return $date_time;
 }
@@ -15786,6 +15930,17 @@ sub get_location {
 	eval $end if $b_log;
 	return @location;
 }
+sub complete_location {
+	eval $start if $b_log;
+	my ($location,$city,$state,$country) = @_;
+	if ($location && $location =~ /[\+\-0-9]/ && $city){
+		$location = $country . ', ' . $location if $country && $location !~ m|$country|i;
+		$location = $state . ', ' . $location if $state && $location !~ m|$state|i;
+		$location = $city . ', ' . $location;
+	}
+	eval $end if $b_log;
+	return $location;
+}
 }
 
 #### -------------------------------------------------------------------
@@ -16710,7 +16865,7 @@ sub get_linux_distro {
 	}
 	if ($extra > 0){
 		my $base_debian_version_distro = 'sidux';
-		my $base_debian_version_osr = '\belive|lmde|neptune|parrot|pureos|sparky|tails';
+		my $base_debian_version_osr = '\belive|lmde|neptune|parrot|pureos|septor|sparky|tails';
 		my $base_default = 'antix-version|mx-version'; # osr has base ids
 		my $base_issue = 'bunsen'; # base only found in issue
 		my $base_manual = 'blankon|deepin|kali'; # synthesize, no direct data available
@@ -17410,12 +17565,15 @@ sub get_pci_vendor {
 	eval $start if $b_log;
 	my ($device, $subsystem) = @_;
 	return if !$subsystem;
-	my ($vendor,$sep) = ('','');
+	my ($vendor,$sep,$temp) = ('','','');
 	# get rid of any [({ type characters that will make regex fail
 	$subsystem = regex_cleaner($subsystem);
 	my @data = split /\s+/, $subsystem;
+	# when using strings in patterns for regex have to escape them
 	foreach (@data){
-		if ($device !~ /\b$_\b/){
+		$temp = $_;
+		$temp =~ s/(\+|\$|\?|\^|\*)/\\$1/g;
+		if ($device !~ m|\b$temp\b|){
 			$vendor .= $sep . $_;
 			$sep = ' ';
 		}

inxi.1

@@ -1,4 +1,4 @@
-.TH INXI 1 "2018\-12\-31" inxi "inxi manual"
+.TH INXI 1 "2019\-02\-06" inxi "inxi manual"
 .SH NAME
 inxi  \- Command line system information script for console and IRC
 .SH SYNOPSIS
@@ -446,15 +446,16 @@ optical drives.
 .TP
 .B \-v 6
 \- Adds full mounted partition data (\fB\-p\fR), unmounted partition data (\fB\-o\fR),
-optical drive data (\fB\-d\fR), USB (\fB\-\-usb\fR); triggers \fB\-xx\fR extra data option.
+optical drive data (\fB\-d\fR), USB (\fB\-\-usb\fR); triggers \fB\-xx\fR extra data 
+option.
 .TP
 .B \-v 7
 \- Adds network IP data (\fB\-i\fR); triggers \fB\-xxx\fR
 .TP
 .B \-v 8
-\- All system data available. Adds Repos (\fB\-r\fR), PCI slots (\fB\-\-slots\fR), processes
+\- All system data available. Adds Repos (\fB\-r\fR), PCI slots (\fB\-\-slots\fR), 
-(\fB\-tcm\fR), admin (\fB\-\-admin\fR). Useful for testing output and to see what data 
+processes (\fB\-tcm\fR), admin (\fB\-\-admin\fR). Useful for testing output and to 
-you can get from your system.
+see what data you can get from your system.
 .TP
 .B \-w\fR,\fB \-\-weather\fR
 Adds weather line. Note, this depends on an unreliable API so it may not always
@@ -462,14 +463,28 @@ be working in the future. To get weather for an alternate location, use
 \fB\-W\fR. See also \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR options.
 Please note that your distribution's maintainer may chose to disable this feature.
 .TP
-.B \-W\fR,\fB \-\-weather\-location <location_string>\fR
+.B \-W\fR, \fB\-\-weather\-location <location_string>\fR
-Get weather/time for an alternate location. Accepts postal/zip code,
+Get weather/time for an alternate location. Accepts postal/zip code[, country],
 city,state pair, or latitude,longitude. Note: city/country/state names must not
-contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces around any commas.
+contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces around 
-Use only ASCII letters in city/state/country names, sorry.
+any commas. Postal code is not reliable except for North America.
 
-Examples: \fB\-W 95623\fR OR \fB\-W Boston,MA\fR OR \fB\-W45.5234,\-122.6762\fR
+Use only ASCII letters in city/state/country names.
-OR \fB\-W new+york,ny\fR OR \fB\-W bodo,norway\fR.
+
+Examples: \fB\-W 95623,usa\fR OR \fB\-W Boston,MA\fR OR 
+\fB\-W 45.5234,\-122.6762\fR OR \fB\-W new+york,ny\fR OR \fB\-W bodo,norway\fR.
+.TP
+.B \-\-weather\-source\fR, \fB\-\-ws <unit>\fR
+[\fB0\-9\fR] Switches weather data source. 0 uses a legacy source which may vanish
+any day. \fB1\-9\fR use different sources from a remote API. \fB1\fR is the same as \fB0 currently.
+\fB2\fR has less data than \fB1\fR or \fB3\fR, and may not support city / country names with spaces 
+(even if you use the \fB+\fR sign instead of space). \fB3\fR offers pretty good data, but
+may not have all small city names for \fB\-W\fR. \fB4\-9\fR may be added at a future 
+point, but are not currently supported.
+
+Note that the actual remote sources may change without notice, but that will have
+no real impact on inxi. Also, additional options may be added in the future, between 
+0 and 9. 
 .TP
 .B \-\-weather\-unit <unit>\fR
 [\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR] Sets weather units to metric (\fBm\fR), imperial (\fBi\fR), 
@@ -747,7 +762,10 @@ if \fBps\fR tests fail to find data.
 \- Adds vendor:chip id.
 .TP
 .B \-xx \-w\fR,\fB \-W\fR
-\- Adds wind chill, heat index, and dew point if any of these are available.
+\- Adds wind chill, heat index, and dew point, if available.
+
+\- Adds cloud cover, rain, snow (amount in previous hour to observation time),
+if available.
 .TP
 .B \-xxx \-A\fR
 \- Adds, if present, serial number.
@@ -826,7 +844,8 @@ lxpanel, xfce4\-panel, lxqt\-panel, tint2, cairo-dock, trayer, and many others.
 \- Adds, if available, USB speed in \fBMbits/s\fR or \fBGbits/s\fR.
 .TP
 .B \-xxx \-w\fR,\fB \-W\fR
-\- Adds location (city state country), altitude, weather observation time.
+\- Adds location (city state country), observation altitude (if available), 
+weather observation time (if available).
 
 .SH ADMIN EXTRA DATA OPTIONS
 These options are triggered with \fB\-\-admin\fR or \fB\-a\fR. Admin options are 
@@ -1040,6 +1059,18 @@ instead of \fBlsusb\fR.
 Forces the USB data generator to use \fBlsusb\fR as data source. Overrides 
 \fBUSB_SYS\fR in user configuration file(s).
 
+.TP
+.B \-\-wan\-ip\-url [URL]\fR
+Force \fB\-i\fR to use supplied URL as WAN IP source. Overrides dig or 
+default IP source urls. URL must start with http[s] or ftp.
+
+The IP address from the URL must be the last item on the last (non-empty) line 
+of the page content source code.
+
+Same as configuration value (example):
+
+\fBWAN_IP_URL='https://mysite.com/ip.php'\fR
+
 .TP
 .B \-\-wm\fR
 Force \fBSystem\fR item \fBwm\fR to use \fBwmctrl\fR as data source, 
@@ -1047,6 +1078,12 @@ override default \fBps\fR source.
 
 .SH DEBUGGING OPTIONS
 
+.TP
+.B \-\-dbg 1\fR
+\- Debug downloader failures. Turns off silent/quiet mode for curl, wget, and
+fetch. Shows more downloader action information. Shows some more information
+for Perl downloader.
+
 .TP
 .B \-\-debug [1\-3]\fR
 \- On screen debugger output. Output varies depending on current needs
@@ -1238,6 +1275,19 @@ above configuration page on smxi.org for full info.
 
 \fBUSB_SYS\fR Forces all USB data to use \fB/sys\fR instead of \fBlsusb\fR.
 
+\fBWAN_IP_URL\fR Forces \fB\-i\fR to use supplied URL, and to not use dig (dig is
+generally much faster). URL must begin with http or ftp. Note that if you use this,
+the downloader set tests will run each time you start inxi whether a downloader feature
+is going to be used or not. 
+
+The IP address from the URL must be the last item on the last (non-empty) line of 
+the URL's page content source code.
+
+Same as \fB\-\-wan\-ip\-url [URL]\fR
+
+\fBWEATHER_SOURCE\fR Values: [\fB0-9\fR]. Same as \fB\-\-weather\-source\fR. Values
+4-9 are not currently supported, but this can change at any time.
+
 \fBWEATHER_UNIT\fR Values: [\fBc\fR|\fBf\fR|\fBcf\fR|\fBfc\fR]. Same as \fB\-\-weather\-unit\fR.
 
 .TP

inxi.changelog

@@ -1,3 +1,69 @@
+=====================================================================================
+Version: 3.0.31
+Patch: 00
+Date: 2019-02-06
+-----------------------------------
+Changes:
+-----------------------------------
+New version, new man page. Big update! Get it in before your freeze!!
+
+Bugs:
+1. Maybe the vendor/product regex, which when + was used, would put out
+errors.
+2. Maybe Fix 4, since that could lead to incorrect behavior when sudo 
+is involved depending on sudo configuration.
+3. BIG: current inxi weather will probably fail if not updated to this or
+newer versions!! Not an inxi bug per se, but your users will see it as one.
+
+Fixes:
+1. Fixed Patriot disk ID.
+2. Fixes for PPC board handling. 
+3. Regex cleaner fixes, this could lead to error in special cases of product
+vendor names.
+4. crazy from frugalware pointed out that $b_root detection was flawed, and
+relied on a bad assumption, particularly for sudo. As usual, he's right, that
+is now corrected, and uses $< Perl native to determine UID.
+
+Enhancements:
+1. Added septor to Debian system base.
+2. Removed quiet filters for downloaders when using --dbg 1, now you see the 
+entire download action for curl/wget downloads. This went along with 
+issue # 174
+3. New feature: --wan-ip-url. This closed issue #174. Also has user config 
+option: WAN_IP_URL as well to make changes permanent.
+4. Added --dbg 1 to man and help. The other --dbg options are random and can 
+change, but --dbg 1 is always for downloading, so might as well tell people 
+about it.
+5. To anticipate the loss of a major weather API, inxi is redone to use smxi.org
+based robust API. This also allows for a new switch, --weather-source (or --ws 
+for shorter version), options 0-9, which will trigger different APIs on smxi.org.
+Added WEATHER_SOURCE configuration option as well. Note that 4-9 are not 
+currently active. Also added in better error handling for weather.
+The main benefit here is that inxi is now largely agnostic to the weather APIs
+used, and those can be changed with no impact to inxi users who are running 
+frozen pool inxi's, or who have not updated their inxi versions.
+
+NOTE: all inxi versions older than 3.0.31 will probably fail for weather 
+quite soon. So update your inxi version in your repos!!
+6. More disk vendors IDs and matches. Thanks linuxlite hardware database. 
+7. Going along with weather changes, added, if present, cloud cover, rain, and
+snow reports. Those are for previously observed hour.
+8. Small change to Intel CPU architecture, taking a guess on stepping for 
+skylake/Cascade lake ID. Guessing if stepping is > 4, it's cascade lake. But
+could not find this documented, so it's a guess. At worst, it  means that Cascade
+lake, which must be a later steppingi than 4, will not be ID'ed as skylake.
+9. Documentation updates for data sources.
+
+Changes:
+1. inxi now uses a new system to get weather data. There is no longer a risk
+of weather failing if the API used locally in inxi fails or goes away. This 
+change should be largely invisible to casual users.
+2. In weather, moved dewpoint to be after humidity, which makes a little more 
+sense.
+
+-----------------------------------
+-- Harald Hope - Wed, 06 Feb 2019 18:09:53 -0800
+
 =====================================================================================
 Version: 3.0.30
 Patch: 00