dmitriy.kazimirov/inxi
1
0
Fork 0
mirror of https://github.com/smxi/inxi.git synced 2024-11-16 16:21:39 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

New version, man page. New features and fixes!

Browse source 
Bugs:
1. -I line, sometimes running in showed sudo. This is hopefully now corrected.

Fixes:
1. CPU architectures, small reordering based on hopefully more reliable data
source, but these are hard to find conclusively.
2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME
is not being used consistently, too many distros leave out the distro id found
in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME
as a fallback. That reverses how it was, but it will provide better results for
most distros. Distros that did this properly to begin with should see no change.
3. Now that inxi is basically debugged and working, I've removed the output of
'inxi' from the -t lines. It remains for the pinxi branch however so you can
see how many resources pinxi uses to run.
4. ipmi sensors data are proving to be as random as lm-sensors. Added another
alternate syntax for sensors.
5. CPU: found an alternate syntax, again, for IPMI and sensors data, added
support, I hope, for that.

Enhancements:
1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file
system is created, it will only run as user, not root, unless the --proc flag is
used. More programs added to debugger commands.
2. More disk vendor strings added, fine tuning of vendor detections. There is a
tendency in NVMe disk names to put the vendor name in the middle of the string.
That is now handled for a few key vendors.
3. Added basic ARM SOC and server support. This will require more work in the future
because the syntax used varies significantly device to device, but the featuers
are now in place to add that support. Most SBC ARM devices should now at least show
the model and details data in machine data, and some will show -G -A -N data as
well.
4. ARM CPU: added first attempt to show the cpu variant as well as the more
generic ARM data. This shows 1 or more variants, some ARM devices have two different
cpu cores running at different speeds. Odroid for example.
5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases.
Currently only Mint and MX/AntiX supported because each specific distro must be
handled explicitly using empirical file based data tests. I decided against showing
this for rolling release, since really everyone knows that Antergos is made from
Arch Linux, so showing that does not provide much useful information, whereas
showing the Ubuntu version Mint was made from does.

Note that several derived distros are changing how they use os-release, so the
tools had to be revised to be more dynamic, which is a pain, and makes it even
more empirical and less predictable to print what should be trivially easy to
gather distro and derived source data.

If your distro is not in this list and you want the base data to be present, please
supply a --debug 22 dataset so I can check all the files required to make the
detection work. If your distro has changed methods, please note which methods
were used in the past, and which are used now.
6. Added Armbian distro detection, that's tricky. Added Rasbpian detections.
Added improved Antergos, Arco, and maybe Chakra, Arch detections.
7. Big one: Hardware RAID basic support added. Note that each vendor, and
unfortunatley, often each product line, has its own raid status and drive
reporting tools, which makes adding the actual drive/raid/status report part
very time consuming to add. I may only support this if a certain software maker's
raid tools are installed because they are much simpler to parse, but for now,
it only shows the presence of the raid device itself, not disks, raid status, etc.
This commit is contained in:
Harald Hope 2018-06-23 11:32:18 -07:00
parent 43c0517c75
commit 2830c98935
3 changed files with 734 additions and 265 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

857
inxi
View file

File diff suppressed because it is too large Load diff

24
inxi.1
View file

@ -1,4 +1,4 @@
.TH INXI 1 "2018\-06\-04" inxi "inxi manual"
.TH INXI 1 "2018\-06\-23" inxi "inxi manual"
.SH NAME
inxi \- Command line system information script for console and IRC
.SH SYNOPSIS
@ -310,6 +310,10 @@ Note: Only md\-raid and ZFS are currently supported. Other software RAID types c
be added, but only if users supply all data required, and if the software
RAID actually can be made to give the required output.
If hardware RAID is detected, shows basic information. Due to complexity
of adding hardware RAID device disk / RAID reports, those will only be added
if there is demand, and reasonable reporting tools.
.TP
.B \-\-recommends\fR
Checks inxi application dependencies and recommends, as well as directories,
@ -573,6 +577,8 @@ generate one.
.B \-x \-R\fR
\- md\-raid: Adds second RAID Info line with extra data: blocks, chunk size,
bitmap (if present). Resync line, shows blocks synced/total blocks.
\- Hardware RAID: Adds driver version, bus ID.
.TP
.B \-x \-s\fR
\- Adds basic voltages: 12v, 5v, 3.3v, vbat (\fBipmi\fR, \fBlm-sensors\fR if present).
@ -583,6 +589,13 @@ bitmap (if present). Resync line, shows blocks synced/total blocks.
.B \-x \-S\fR
\- Kernel gcc version.
.TP
.B \-x \-S\fR
\- Adds to \fBDistro:\fR \fBbase:\fR if detected. System base will only be seen on
a subset of distributions. The distro must be both derived from a parent distro (e.g. Mint from
Ubuntu), and explicitly added to the supported distributions for this feature. Due to
the complexity of distribution identification, these will only be added as relatively solid
methods are found for each distribution system base detection.
.TP
.B \-x \-t\fR
\- Adds memory use output to CPU (\fB\-xt c\fR), and CPU use to memory
(\fB\-xt m\fR).
@ -674,6 +687,8 @@ ROM size if using \fBdmidecode\fR.
.B \-xx \-R\fR
\- md\-raid: Adds superblock (if present) and algorithm. If resync,
shows progress bar.
\- Hardware RAID: Adds Chip vendor:product ID.
.TP
.B \-xx \-s\fR
\- Adds DIMM/SOC voltages, if present (\fBipmi\fR only).
@ -742,6 +757,8 @@ data available.
\- md\-raid: Adds system mdraid support types (kernel support, read ahead, RAID events)
\- zfs\-raid: Adds portion allocated (used) by RAID array/device.
\- Hardware RAID: Adds rev, ports.
.TP
.B \-xxx \-S\fR
\- Adds, if run in X, shell/panel type (\fBinfo\fR), if present.
@ -937,6 +954,11 @@ For alternate ftp upload locations: Example:
\fBinxi \-\-ftp \fIftp.yourserver.com/incoming\fB \-\-debug 21\fR
.TP
.B \-\-proc\fR
Force debugger to parse \fB/proc\fR directory data when run as root. Normally this is
disabled due to unpredictable data in /proc tree. Only used with \fB\-\-debug 2x\fR.
.SH SUPPORTED IRC CLIENTS
BitchX, Gaim/Pidgin, ircII, Irssi, Konversation, Kopete, KSirc, KVIrc, Weechat,
and Xchat. Plus any others that are capable of displaying either built\-in or external

72
inxi.changelog
View file

@ -1,3 +1,75 @@
=====================================================================================
Version: 3.0.13
Patch Version: 00
Script Date: 2018-06-23
-----------------------------------
Changes:
-----------------------------------
New version, man page. New features and fixes!
Bugs:
1. -I line, sometimes running in showed sudo. This is hopefully now corrected.
Fixes:
1. CPU architectures, small reordering based on hopefully more reliable data
source, but these are hard to find conclusively.
2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME
is not being used consistently, too many distros leave out the distro id found
in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME
as a fallback. That reverses how it was, but it will provide better results for
most distros. Distros that did this properly to begin with should see no change.
3. Now that inxi is basically debugged and working, I've removed the output of
'inxi' from the -t lines. It remains for the pinxi branch however so you can
see how many resources pinxi uses to run.
4. ipmi sensors data are proving to be as random as lm-sensors. Added another
alternate syntax for sensors.
5. CPU: found an alternate syntax, again, for IPMI and sensors data, added
support, I hope, for that.
Enhancements:
1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file
system is created, it will only run as user, not root, unless the --proc flag is
used. More programs added to debugger commands.
2. More disk vendor strings added, fine tuning of vendor detections. There is a
tendency in NVMe disk names to put the vendor name in the middle of the string.
That is now handled for a few key vendors.
3. Added basic ARM SOC and server support. This will require more work in the future
because the syntax used varies significantly device to device, but the featuers
are now in place to add that support. Most SBC ARM devices should now at least show
the model and details data in machine data, and some will show -G -A -N data as
well.
4. ARM CPU: added first attempt to show the cpu variant as well as the more
generic ARM data. This shows 1 or more variants, some ARM devices have two different
cpu cores running at different speeds. Odroid for example.
5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases.
Currently only Mint and MX/AntiX supported because each specific distro must be
handled explicitly using empirical file based data tests. I decided against showing
this for rolling release, since really everyone knows that Antergos is made from
Arch Linux, so showing that does not provide much useful information, whereas
showing the Ubuntu version Mint was made from does.
Note that several derived distros are changing how they use os-release, so the
tools had to be revised to be more dynamic, which is a pain, and makes it even
more empirical and less predictable to print what should be trivially easy to
gather distro and derived source data.
If your distro is not in this list and you want the base data to be present, please
supply a --debug 22 dataset so I can check all the files required to make the
detection work. If your distro has changed methods, please note which methods
were used in the past, and which are used now.
6. Added Armbian distro detection, that's tricky. Added Rasbpian detections.
Added improved Antergos, Arco, and maybe Chakra, Arch detections.
7. Big one: Hardware RAID basic support added. Note that each vendor, and
unfortunatley, often each product line, has its own raid status and drive
reporting tools, which makes adding the actual drive/raid/status report part
very time consuming to add. I may only support this if a certain software maker's
raid tools are installed because they are much simpler to parse, but for now,
it only shows the presence of the raid device itself, not disks, raid status, etc.
-----------------------------------
-- Harald Hope - Sat, 23 Jun 2018 10:24:30 -0700
=====================================================================================
Version: 3.0.12
Patch Version: 00