diff --git a/inxi.1 b/inxi.1
index 3bfe8e0..13153a8 100644
--- a/inxi.1
+++ b/inxi.1
@@ -32,7 +32,7 @@ inxi  \- Command line system information script for console and IRC
 [\fB\-\-weather\-unit\fR {\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR}] [\fB\-y WIDTH\fR] 
 
 \fBinxi\fR [\fB\-\-memory\-modules\fR] [\fB\-\-memory\-short\fR] 
-[\fB\-\-recommends\fR]  [\fB\-\-sensors\-default\fR] [\fB\-\-slots\fR]
+[\fB\-\-recommends\fR] [\fB\-\-sensors\-default\fR] [\fB\-\-slots\fR]
 
 \fBinxi\fB [\fB\-x\fR|\fB\-xx\fR|\fB\-xxx\fR|\fB\-a\fR] \fB\-OPTION(s)\fR
 
@@ -131,7 +131,7 @@ Set color scheme. If no scheme number is supplied, 0 is assumed.
 .TP
 .B \-c \fR[\fB94\fR\-\fB99\fR]
 
-These color selectors run a color selector option  prior to inxi starting 
+These color selectors run a color selector option prior to inxi starting 
 which lets you set the config file value for the selection.
 
 NOTE: All configuration file set color values are removed when output is 
@@ -160,7 +160,7 @@ Konversation etc.
 
 .TP
 .B \-c 98\fR
-\- Console IRC not in  X.
+\- Console IRC not in X.
 
 .TP
 .B \-c 99\fR
@@ -445,10 +445,10 @@ Other types of logical block handling like LUKS, bcache show as:
 
 .TP
 .B \-m\fR,\fB \-\-memory\fR
-Memory (RAM) data. Does not display with  \fB\-b\fR or  \fB\-F\fR unless you 
+Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you 
 use \fB\-m\fR explicitly. Ordered by system board physical system memory 
 array(s) (\fBArray\-[number]\fR), and individual memory devices 
-(\fBDevice\-[number]\fR). Physical memory array  data shows array capacity, 
+(\fBDevice\-[number]\fR). Physical memory array data shows array capacity, 
 number of devices supported, and Error Correction information. Devices shows 
 locator data (highly variable in syntax), size, speed, type 
 (eg: \fBtype: DDR3\fR).
@@ -723,7 +723,7 @@ man install.
 .B \-\-usb\fR \- See \fB\-J\fR
 
 .TP
-.B  \-V\fR, \fB\-\-version\fR
+.B \-V\fR, \fB\-\-version\fR
 inxi version information. Prints information then exits.
 
 .TP
@@ -1137,7 +1137,7 @@ its design speed.
 
 NVMe drives: adds lanes, and (per direction) speed is calculated with 
 lane speed * lanes * PCIe overhead. PCIe 1 and 2 have data rates of 
-GT/s * .8  = Gb/s (10 bits required to transfer 8 bits of data). 
+GT/s * .8 = Gb/s (10 bits required to transfer 8 bits of data). 
 PCIe 3 and greater transfer data at a rate of GT/s * 128/130 * lanes = Gb/s 
 (130 bits required to transfer 128 bits of data).
 
@@ -1161,7 +1161,7 @@ if applicable) for each device.
 
 \- Adds Xorg compositor, if found (always shows for Wayland systems).
 
-\- For free drivers, adds OpenGL compatibility version number if  available.
+\- For free drivers, adds OpenGL compatibility version number if available.
 For nonfree drivers, the core version and compatibility versions are usually
 the same. Example:
 
@@ -1218,7 +1218,7 @@ documentation to better understand their use of the term 'stripes'.
 .B \-xx \-m\fR, \fB\-\-memory\-modules\fR
 \- Adds memory device Manufacturer.
 
-\- Adds  memory device Part Number (\fBpart\-no:\fR). Useful for ordering new 
+\- Adds memory device Part Number (\fBpart\-no:\fR). Useful for ordering new 
 or replacement memory sticks etc. Part numbers are unique, particularly if you 
 use the word \fBmemory\fR in the search as well. With \fB\-xxx\fR, also shows 
 serial number.
@@ -1911,7 +1911,7 @@ Example: \fBinxi \-sxx \-\-sensors\-exclude k10temp-pci-00c3\fR
 
 .TP
 .B \-\-sensors\-use\fR
-Use only the  (comma separated) sensor arrays for \fB\-s\fR output. Make 
+Use only the (comma separated) sensor arrays for \fB\-s\fR output. Make 
 permanent with \fBSENSORS_USE\fR configuration item. Sensor array ID value 
 must be the exact value shown in lm\-sensors sensors output (Linux/lm-sensors 
 only). If you only want to exclude one (or more) sensors from the output, 
@@ -1953,7 +1953,7 @@ Forces internal IRC flag to off. Used in unhandled cases where the program
 running inxi may not be seen as a shell/tty, but it is not an IRC client. 
 Put \fB\-\-tty\fR first in option list to avoid unexpected errors. If you want 
 a specific output width, use the \fB\-\-width\fR option. If you want normal 
-color codes in the output, use the  \fB\-c [color ID]\fR flag.
+color codes in the output, use the \fB\-c [color ID]\fR flag.
 
 The sign you need to use this is extra numbers before the key/value pairs of 
 the output of your program. These are IRC, not TTY, color codes. Please post a 
@@ -2213,7 +2213,7 @@ HTML downloaders are hanging.
 or \fBc\fR. Default is 5.
 
 \fBSENSORS_CPU_NO\fR In cases of ambiguous temp1/temp2 (inxi can't figure out 
-which is the CPU), forces sensors to use  either value 1 or 2 as CPU 
+which is the CPU), forces sensors to use either value 1 or 2 as CPU 
 temperature. See the above configuration page on smxi.org for full info.
 
 \fBSENSORS_EXCLUDE\fR Exclude supplied sensor array[s] from sensor output. 
@@ -2306,7 +2306,7 @@ You can also visit
 is a fork of \fBlocsmif\fR's very clever \fBinfobash\fR script.
 
 Original infobash author and copyright holder:
-Copyright (C) 2005\-2007  Michiel de Boer aka locsmif
+Copyright (C) 2005\-2007 Michiel de Boer aka locsmif
 
 inxi version: Copyright (C) 2008\-2021 Harald Hope
 
@@ -2330,7 +2330,7 @@ Jarett.Stevens \- \fBdmidecode \-M\fR patch for older systems with no
 .SH SPECIAL THANKS TO THE FOLLOWING
 
 The nice people at irc.oftc.net channels #linux\-smokers\-club and #smxi,
-who  all really have to be considered to be co\-developers because of their
+who all really have to be considered to be co\-developers because of their
 non\-stop enthusiasm and willingness to provide real\-time testing and 
 debugging of inxi development.