dmitriy.kazimirov/inxi
1
0
Fork 0
mirror of https://github.com/smxi/inxi.git synced 2024-11-16 16:21:39 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
inxi/inxi.1

1176 lines
44 KiB
Groff
Raw Normal View History

New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
.TH INXI 1 "2018\-07\-12" inxi "inxi manual"
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH NAME
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
inxi \- Command line system information script for console and IRC
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH SYNOPSIS
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
\fBinxi\fR
second try, to get man output and roffit output to match better
2016-10-29 22:25:55 +00:00
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
\fBinxi\fR [\fB\-AbBCdDfFGhiIlmMnNopPrRsSuUVwzZ\fR]
second try, to get man output and roffit output to match better
2016-10-29 22:25:55 +00:00
man typo fix
2018-04-19 02:47:09 +00:00
\fBinxi\fR [\fB\-c NUMBER\fR] [\fB\-t\fR [\fBc\fR|\fBm\fR|\fBcm\fR|\fBmc\fR]
fixed order of man
2018-05-11 22:35:05 +00:00
[\fBNUMBER\fR]] [\fB\-v NUMBER\fR] [\fB\-W LOCATION\fR]
fixed weather unit man
2018-05-21 22:11:04 +00:00
[\fB\-\-weather\-unit\fR {\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR}] [\fB\-y WIDTH\fR]
second try, to get man output and roffit output to match better
2016-10-29 22:25:55 +00:00
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
\fBinxi\fR [\fB\-\-recommends\fR] \fR[\fB\-\-slots\fR] \fR[\fB\-\-usb\fR]
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\fBinxi\fB [\-x\fR|\fB\-xx\fR|\fB\-xxx\fR|\-\-admin] \fB\-OPTION(s) \fR
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
All options have long form variants \- see below for these and more advanced options.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH DESCRIPTION
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBinxi\fR is a command line system information script built for console
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
and IRC. It is also used a debugging tool for forum technical support
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
to quickly ascertain users' system configurations and hardware. inxi shows
system hardware, CPU, drivers, Xorg, Desktop, Kernel, gcc version(s), Processes,
RAM usage, and a wide variety of other useful information.
\fBinxi\fR output varies depending on whether it is being used on CLI or IRC,
with some default filters and color options applied only for IRC use.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Script colors can be turned off if desired with \fB\-c 0\fR, or changed
using the \fB\-c\fR color options listed in the STANDARD OPTIONS section below.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH PRIVACY AND SECURITY
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
In order to maintain basic privacy and security, inxi used on IRC automatically
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
filters out your network card MAC address, WAN and LAN IP, your \fB/home\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
username directory in partitions, and a few other items.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Because inxi is often used on forums for support, you can also trigger this
filtering with the \fB\-z\fR option (\fB\-Fz\fR, for example). To override
the IRC filter, you can use the \fB\-Z\fR option. This can be useful in debugging
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
network connection issues online in a private chat, for example.
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH USING OPTIONS
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Options can be combined if they do not conflict. You can either group the letters
decided have skills to edit
2012-09-15 09:18:08 +00:00
together or separate them.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Letters with numbers can have no gap or a gap at your discretion, except when
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
using \fB \-t\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
For example:
.B inxi
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\fB\-AG\fR or \fBinxi \-A \-G\fR or \fBinxi \-c10\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Note that all the short form options have long form equivalents, which are
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
listed below. However, usually the short form is used in examples in order to
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
keep things simple.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH STANDARD OPTIONS
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-A\fR,\fB \-\-audio\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show Audio/sound card(s) information, including card driver.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-b\fR,\fB \-\-basic\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show basic output, short form. Same as: \fBinxi \-v 2\fR
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-B\fR,\fB \-\-battery\fR
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
Show system battery (\fBID\-x\fR) data, charge, condition, plus extra information
(if battery present). Uses \fB/sys\fR or, for BSDs without systctl battery data,
\fBdmidecode\fR. \fBdmidecode\fR does not have very much information, and none
about current battery state/charge/voltage. Supports multiple batteries when
using \fB/sys\fR data.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Note that for \fBcharge\fR, the output shows the current charge, as well as its
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
value as a percentage of the available capacity, which can be less than the original design
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
capacity. In the following example, the actual current available capacity of the battery
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
is \fB22.2 Wh\fR.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\fBcharge: 20.1 Wh 95.4%\fR
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
The \fBcondition\fR item shows the remaining available capacity / original design
capacity, and then this figure as a percentage of original capacity available in the battery.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\fBcondition: 22.2/36.4 Wh (61%)\fR
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
With \fB\-x\fR shows attached \fBDevice\-x\fR information (mouse, keyboard, etc.)
if they are battery powered.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-c\fR,\fB \-\-color\fR \fR[\fB0\fR\-\fB42\fR]
Set color scheme. If no scheme number is supplied, 0 is assumed.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-c \fR[\fB94\fR\-\fB99\fR]
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
These color selectors run a color selector option prior to inxi starting which lets
decided have skills to edit
2012-09-15 09:18:08 +00:00
you set the config file value for the selection.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Color selectors for each type display (NOTE: IRC and global only show safe color set):
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 94\fR
\- Console, out of X.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 95\fR
\- Terminal, running in X \- like xTerm.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 96\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- GUI IRC, running in X \- like XChat, Quassel,
decided have skills to edit
2012-09-15 09:18:08 +00:00
Konversation etc.
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 97\fR
\- Console IRC running in X \- like irssi in xTerm.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 98\fR
\- Console IRC not in X.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-c 99\fR
\- Global \- Overrides/removes all settings.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Setting a specific color type removes the global color selection.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-C\fR,\fB \-\-cpu\fR
Show full CPU output, including per CPU clock speed and CPU max speed (if available).
Fix some slightly broken man-page markup.
2018-04-15 17:07:26 +00:00
If max speed data present, shows \fB(max)\fR in short output formats (\fBinxi\fR,
\fBinxi \-b\fR) if actual CPU speed matches max CPU speed. If max CPU speed does
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
not match actual CPU speed, shows both actual and max speed information.
See \fB\-x\fR for more options.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
For certain CPUs (some ARM, and AMD Zen family) shows CPU die count.
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
The details for each CPU include a technical description e.g. \fBtype: MT MCP\fR
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBMT\fR \- Multi/Hyper Threaded CPU, more than 1 thread per core (previously \fBHT\fR).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBMCM\fR \- Multi Chip Model (more than 1 die per CPU).
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBMCP\fR \- Multi Core Processor (more than 1 core per CPU).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
* \fBSMP\fR \- Symmetric Multi Processing (more than 1 physical CPU).
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
* \fBUP\fR \- Uni (single core) Processor.
New version, new tarball, new man page. This should fix the Rizen multithreaded cpu output issues. Now inxi handles > 8 cores in terms of output filters, descriptions, correctly noting that it's multithreaded. Because AMD has entered the Multithreading game, I've changed the trade term: HT - HyperThreading to MT - MultiThreading to support both Intel and AMD variants. Updated CPU output filters to also account for these very large core counts. I believe this commit now adds full support for the new Ryzen series, but I'll have to see when it comes to other variants that may appear. I've tried to future proof the MT tests, but I won't know of those are fully functional and accurate until inxi sees the real data.
2017-12-07 19:22:59 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-d\fR,\fB \-\-disk\-full\fR,\fB\-\-optical\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show optical drive data as well as \fB\-D\fR hard drive data. With \fB\-x\fR, adds a
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
feature line to the output. Also shows floppy disks if present. Note that there is
no current way to get any information about the floppy device that I am aware of,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
so it will simply show the floppy ID without any extra data. \fB\-xx\fR adds a
few more features.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-D\fR,\fB \-\-disk\fR
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
Show Hard Disk info. Shows total disk space and used percentage. The disk used
percentage includes space used by swap partition(s), since those are not usable
for data storage. Note that with RAID disks, the percentage will be wrong since
the total is computed from the disk sizes, but used is computed from mounted
partition used percentages. This small defect may get corrected in the future.
Also, unmounted partitions are not counted in disk use percentages since inxi
has no access to the used amount.
Also shows per disk information: Disk ID, type (if present), vendor (if detected),
model, and size. See \fBExtra Data Options\fR for more features.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-f\fR,\fB \-\-flags\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show all CPU flags used, not just the short list. Not shown with \fB\-F\fR in order
to avoid spamming. ARM CPUs: show \fBfeatures\fR items.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-F\fR,\fB \-\-full\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show Full output for inxi. Includes all Upper Case line letters except \fB\-W\fR,
plus \fB\-s\fR and \fB\-n\fR. Does not show extra verbose options such as
\fB\-d \-f \-i \-l \-m \-o \-p \-r \-t \-u \-x\fR unless you use those arguments in
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
the command, e.g.: \fBinxi \-Frmxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-G\fR,\fB \-\-graphics\fR
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
Show Graphic card(s) information, including details of card and card driver,
display protocol (if available), display server (vendor and version number), e.g.:
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
\fBDisplay: x11 server: Xorg 1.15.1\fR
Slight update to man page as well to reflect recent gfx output changes.
2017-06-25 01:28:24 +00:00
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
If protocol is not detected, shows:
\fBDisplay: server: Xorg 1.15.1\fR
Also shows screen resolution(s), OpenGL renderer, OpenGL core profile version/OpenGL
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
version.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
Compositor information will show if detected using \fB\-xx\fR option.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-h\fR,\fB \-\-help\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
The help menu. Features dynamic sizing to fit into terminal window. Set script
global \fBCOLS_MAX_CONSOLE\fR if you want a different default value, or
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
use \fB\-y <width>\fR to temporarily override the defaults or actual window width.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-i\fR,\fB \-\-ip\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show WAN IP address and local interfaces (latter requires \fBifconfig\fR or
\fBip\fR network tool), as well as network output from \fB\-n\fR.
Not shown with \fB\-F\fR for user security reasons. You shouldn't paste your
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
local/WAN IP. Shows both IPv4 and IPv6 link IP addresses.
New version, new tarball, new man page. This corrects several oversights of the 2.3.10 IPv6 update. Now there is an -x option for -i that will show the additioanl IPv6 address data for scope global, temporary, and site. Also a fallback for unhandled scope: unknown. If the tool 'ip' is used, it will filter out the deprecated temp site/global addresses, ifconfig tool does not appear to offer this option. Also changed is that now ipv6 address always shows, it's not an -x option. Probably about time to start rolling out ip v6 data to users now that ip v6 is starting, slowly, to be used more. Another small change, the link address for ipv6 is changed from ip-v6: to ip-v6-link so that it's more clear which IP v6 address it is. The last commit had a significant logic error in it that did not distinguish between the link address, which is what should have only shown, and the remaining possible addresses. I've tried to get a basic bsd support, but it's difficult to know the variants of ifconfig output syntax
2017-05-31 22:33:16 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-I\fR,\fB \-\-info\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show Information: processes, uptime, memory, IRC client (or shell type if run in
shell, not IRC), inxi version. See \fB\-x\fR and \fB\-xx\fR for extra information
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
(init type/version, runlevel).
Rasberry Pi only: uses \fBvcgencmd get_mem gpu\fR to get gpu RAM amount,
if user is in video group and \fBvcgencmd\fR is installed. Uses
this result to increase the \fBMemory:\fR amount and \fBused:\fR amounts.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-l\fR,\fB \-\-label\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show partition labels. Default: main partitions \fB\-P\fR. For full \fB\-p\fR output,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
use: \fB\-pl\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-m\fR,\fB \-\-memory\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you use \fB\-m\fR
explicitly. Ordered by system board physical system memory array(s) (\fBArray\-[number]\fR),
and individual memory devices (\fBDevice\-[number]\fR). Physical memory
array data shows array capacity, number of devices supported, and Error Correction
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
information. Devices shows locator data (highly variable in syntax), size, speed,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
type (eg: \fBtype: DDR3\fR).
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note that \fB\-m\fR uses \fBdmidecode\fR, which must be run as root (or start
\fBinxi\fR with \fBsudo\fR), unless you figure out how to set up sudo to permit
dmidecode to read \fB/dev/mem\fR as user. Note that speed will not show if \fBNo Module
Installed\fR is found in \fBsize\fR. This will also turn off Bus Width data output if it is null.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If memory information was found, and if the \fB\-I\fR line or the \fB\-tm\fR item have
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
not been triggered, will also print the RAM used/total.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Because \fBdmidecode\fR data is extremely unreliable, inxi will try to make best guesses.
If you see \fB(check)\fR after the capacity number, you should check it with the
specifications. \fB(est)\fR is slightly more reliable, but you should still check
the real specifications before buying RAM. Unfortunately there is nothing \fBinxi\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
can do to get truly reliable data about the system RAM; maybe one day the kernel devs
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
will put this data into \fB/sys\fR, and make it real data, taken from the actual system,
not dmi data. For most people, the data will be right, but a significant percentage of
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
users will have either a wrong max module size, if present, or max capacity.
New version, new tarball, new man page. Finally, after all these years, initial memory/ram support. This feature requires dmidecode, and usually that needs to be run as root. Significantly improved dmidecode error handling and output, and have as 2.1.90 testing/initial release basic ram data. In subsequent releases, extra info for -x and -xx and -xxx will be added as well to the output. For those who want to jump on board early for ram data, update your repos, for those who want to wait for the full featured version, with -x type data, wait for 2.2.0 And that's that.
2014-08-12 05:26:35 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-M\fR,\fB \-\-machine\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show machine data. Device, Motherboard, BIOS, and if present, System Builder (Like Lenovo).
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Older systems/kernels without the required \fB/sys\fR data can use \fBdmidecode\fR instead, run
as root. If using \fBdmidecode\fR, may also show BIOS/UEFI revision as well as version.
\fB\-\-dmidecode\fR forces use of \fBdmidecode\fR data instead of \fB/sys\fR.
Will also attempt to show if the system was booted by BIOS, UEFI, or UEFI [Legacy], the
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
latter being legacy BIOS boot mode in a system board using UEFI.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Device information requires either \fB/sys\fR or \fBdmidecode\fR. Note that 'other\-vm?'
is a type that means it's usually a VM, but inxi failed to detect which type, or
positively confirm which VM it is. Primary VM identification is via systemd\-detect\-virt
but fallback tests that should also support some BSDs are used. Less commonly
used or harder to detect VMs may not be correctly detected. If you get an incorrect output,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
post an issue and we'll get it fixed if possible.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Due to unreliable vendor data, device type will show: desktop, laptop, notebook, server,
blade, plus some obscure stuff that inxi is unlikely to ever run on.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-n\fR,\fB \-\-network\-advanced\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show Advanced Network card information in addition to that produced by \fB\-N\fR.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Shows interface, speed, MAC ID, state, etc.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-N\fR,\fB \-\-network\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show Network card(s) information, including card driver. With \fB\-x\fR, shows PCI BusID,
Port number.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-o\fR,\fB \-\-unmounted\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
Show unmounted partition information (includes UUID and LABEL if available).
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Shows file system type if you have \fBlsblk\fR installed (Linux only). For BSD/GNU Linux:
shows file system type if \fBfile\fR is installed, and if you are root or
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.B <username> ALL = NOPASSWD: /usr/bin/file (sample)
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Does not show components (partitions that create the md\-raid array) of md\-raid arrays.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-p\fR,\fB \-\-partitions\-full\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show full Partition information (\fB\-P\fR plus all other detected mounted partitions).
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-P\fR,\fB \-\-partitions\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show basic Partition information.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Shows, if detected: \fB/ /boot /home /opt /tmp /usr /var /var/tmp /var/log\fR.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Use \fB\-p\fR to see all mounted partitions.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-r\fR,\fB \-\-repos\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
Show distro repository data. Currently supported repo types:
New version, tarball, man page. Added support for Alpine Linux apk package manager for the -r option. Fixed typos and glitches in man page as well.
2017-06-29 19:56:23 +00:00
\fBAPK\fR (Alpine Linux + derived versions)
a few more man page edits, style stuff mostly.
2014-04-04 02:47:08 +00:00
\fBAPT\fR (Debian, Ubuntu + derived versions)
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
\fBEOPKG\fR (Solus)
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBPACMAN\fR (Arch Linux, KaOS + derived versions)
\fBPACMAN\-G2\fR (Frugalware + derived versions)
decided have skills to edit
2012-09-15 09:18:08 +00:00
a few more man page edits, style stuff mostly.
2014-04-04 02:47:08 +00:00
\fBPISI\fR (Pardus + derived versions)
New version, tarball. Added urpmq for -r. Other distros than Mandriva, Mageia, no other changes so no need to update unless you want to. This adds support for Mandriva, Mageia. urpmq parsing is similar but not identical to pisi.
2013-10-05 01:40:00 +00:00
small man page edit for consistency
2015-02-16 02:22:32 +00:00
\fBPORTAGE\fR (Gentoo, Sabayon + derived versions)
New version, updated man page, new tarball. Updated -r to for portage gentoo sources. This should work fine for all derived distros like Sabayon as well. The test looks for: /etc/portage/repos.conf/ and type -p emerge if found will then grab the repos from the source files found. Note that the logic for this was almost identical to that used for rpm so it was an easy addon. Please let us know if you have an issue and provide data samples of relevant files.
2015-02-16 02:17:58 +00:00
\fBPORTS\fR (OpenBSD, FreeBSD, NetBSD + derived OS types)
typo fix in man page
2015-02-16 02:33:41 +00:00
\fBSLACKPKG\fR (Slackware + derived versions)
New version, updated man page, new tarball. Updated -r to for portage gentoo sources. This should work fine for all derived distros like Sabayon as well. The test looks for: /etc/portage/repos.conf/ and type -p emerge if found will then grab the repos from the source files found. Note that the logic for this was almost identical to that used for rpm so it was an easy addon. Please let us know if you have an issue and provide data samples of relevant files.
2015-02-16 02:17:58 +00:00
a few more man page edits, style stuff mostly.
2014-04-04 02:47:08 +00:00
\fBURPMQ\fR (Mandriva, Mageia + derived versions)
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\fBYUM/ZYPP\fR (Fedora, Red Hat, Suse + derived versions)
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
More will be added as distro data is collected. If yours is missing please
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
show us how to get this information and we'll try to add it.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-R\fR,\fB \-\-raid\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Show RAID data. Shows RAID devices, states, levels and components, and
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
extra data with \fB\-x\fR / \fB\-xx\fR.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
md\-raid: If device is resyncing, also shows resync progress line.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note: Only md\-raid and ZFS are currently supported. Other software RAID types could
be added, but only if users supply all data required, and if the software
RAID actually can be made to give the required output.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
If hardware RAID is detected, shows basic information. Due to complexity
of adding hardware RAID device disk / RAID reports, those will only be added
if there is demand, and reasonable reporting tools.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-recommends\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Checks inxi application dependencies and recommends, as well as directories,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
then shows what package(s) you need to install to add support for each feature.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-s\fR,\fB \-\-sensors\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show output from sensors if sensors installed/configured: Motherboard/CPU/GPU
temperatures; detected fan speeds. GPU temperature when available. Nvidia shows
screen number for multiple screens. IPMI sensors are also used (root required)
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
if present.
.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-slots\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show PCI slots with type, speed, and status information.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
.B \-S\fR,\fB \-\-system\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show System information: host name, kernel, desktop environment (if in X),
distro. With \fB\-xx\fR show dm \- or startx \- (only shows if present and
running if out of X), and if in X, with \fB\-xxx\fR show more desktop info,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
e.g. shell/panel.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-t\fR,\fB \-\-processes\fR
man typo fix
2018-04-19 02:47:09 +00:00
[\fBc\fR|\fBm\fR|\fBcm\fR|\fBmc NUMBER\fR] Show processes. If no arguments, defaults to \fBcm\fR.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
If followed by a number, shows that number of processes for each type
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
(default: \fB5\fR; if in IRC, max: \fB5\fR)
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Make sure that there is no space between letters and numbers (e.g. write as \fB\-t cm10\fR).
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t c\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\- CPU only. With \fB\-x\fR, also shows memory for that process on same line.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t m\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- memory only. With \fB\-x\fR, also shows CPU for that process on same line.
If the \-I line is not triggered, will also show the system RAM used/total
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
information.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B \-t cm\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- CPU+memory. With \fB\-x\fR, shows also CPU or memory for that process on
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
same line.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-usb\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Show USB data for attached Hubs and Devices.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-u\fR,\fB \-\-uuid\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Show partition UUIDs. Default: main partitions \fB\-P\fR. For full \fB\-p\fR
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
output, use: \fB\-pu\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-U\fR,\fB \-\-update\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note \- Maintainer may have disabled this function.
editing the man page, let's see if it improves.
2014-04-03 18:28:18 +00:00
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
If inxi \fB\-h\fR has no listing for \fB\-U\fR then it's disabled.
editing the man page, let's see if it improves.
2014-04-03 18:28:18 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Auto\-update script. Note: if you installed as root, you must be root to
update, otherwise user is fine. Also installs / updates this man page to:
\fB/usr/local/share/man/man1\fR (if \fB/usr/local/share/man/\fR exists
AND there is no inxi man page in \fB/usr/share/man/man1\fR, otherwise it
goes to \fB/usr/share/man/man1\fR). This requires that you be root to write
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
to that directory. See \fB\-\-man\fR or \fB\-\-no\-man\fR to force or disable
man install.
edit of man.1 page, fixed error in man location. irrelevant for distro maintainers.
2017-01-05 00:23:16 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-V\fR,\fB \-\-version\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
inxi version information. Prints information then exits.
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-v\fR,\fB \-\-verbosity\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Script verbosity levels. If no verbosity level number is given, 0 is assumed.
Should not be used with \fB\-b\fR or \fB\-F\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
Supported levels: \fB0\-8\fR Examples :\fB inxi \-v 4 \fR or \fB inxi \-v4\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 0
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Short output, same as: \fBinxi\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 1
\- Basic verbose, \fB\-S\fR + basic CPU (cores, type, clock speed, and min/max
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
speeds, if available) + \fB\-G\fR + basic Disk + \fB\-I\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 2
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\- Adds networking card (\fB\-N\fR), Machine (\fB\-M\fR) data, Battery (\fB\-B\fR)
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
(if available). Same as: \fBinxi \-b\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 3
\- Adds advanced CPU (\fB\-C\fR) and network (\fB\-n\fR) data; triggers \fB\-x\fR
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
advanced data option.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 4
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\- Adds partition size/used data (\fB\-P\fR) for (if present):
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fB/ /home /var/ /boot\fR. Shows full disk data (\fB\-D\fR)
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 5
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds audio card (\fB\-A\fR), memory/RAM (\fB\-m\fR), sensors (\fB\-s\fR),
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
partition label (\fB\-l\fR), UUID (\fB\-u\fR), and short form of
decided have skills to edit
2012-09-15 09:18:08 +00:00
optical drives.
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 6
\- Adds full mounted partition data (\fB\-p\fR), unmounted partition data (\fB\-o\fR),
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
optical drive data (\fB\-d\fR), USB (\fB\-\-usb\fR); triggers \fB\-xx\fR extra data option.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 7
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Adds network IP data (\fB\-i\fR); triggers \fB\-xxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B \-v 8
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
\- All system data available. Adds Repos (\fB\-r\fR), PCI slots (\fB\-\-slots\fR), processes
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
(\fB\-tcm\fR). Useful for testing output and to see what data you can get from your system.
.TP
.B \-w\fR,\fB \-\-weather\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Adds weather line. Note, this depends on an unreliable API so it may not always
be working in the future. To get weather for an alternate location, use
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fB\-W\fR. See also \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR options.
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
Please note that your distribution's maintainer may chose to disable this feature.
New tarball, version, man page. Improved remote weather, now it uses -W, and deprecated -! location=.. That was too hard to type and too hard to remember. Also do more dyanamic reordering of weather output, depending on how much data is present, and how many x options are used. Added error handling for generic deprecated options, and for options that do not have the correct syntax for OPTARG, like with -W. This should about do it for the weather option for now unless I missed something somewhere.
2013-05-26 03:19:38 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-W\fR,\fB \-\-weather\-location <location_string>\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Get weather/time for an alternate location. Accepts postal/zip code,
city,state pair, or latitude,longitude. Note: city/country/state names must not
contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces around any commas.
Use only ASCII letters in city/state/country names, sorry.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Examples: \fB\-W 95623\fR OR \fB\-W Boston,MA\fR OR \fB\-W45.5234,\-122.6762\fR
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
OR \fB\-W new+york,ny\fR OR \fB\-W bodo,norway\fR.
New version, new man page, new tarball. Added -y [integer >= 80] option. This allows for absolute override of width settings. This overrides any dynamically detected widths, as well as the globals: COLS_MAX_CONSOLE='115' COLS_MAX_IRC='105' Now that inxi widths are largely dynamic in terminal, with a few lingering exceptions, it made sense to also allow for overrides of this. This is useful in cases where for example you want to output inxi to text file or for other purposes, or if you just want to test the widths, as in my case. -y cannot be used with --recommends, but otherwise it works fine, with --help/-c 94-99 you have to put -y first in the list of options. Example: inxi -v7 -y150 > inxi.txt will ignore the terminal settings and output the lines at basically max length.
2014-04-03 17:46:31 +00:00
.TP
tiny man glitch, fixed
2018-05-13 01:13:48 +00:00
.B \-\-weather\-unit <unit>\fR
fixed weather unit man
2018-05-21 22:11:04 +00:00
[\fBm\fR|\fBi\fR|\fBmi\fR|\fBim\fR] Sets weather units to metric (\fBm\fR), imperial (\fBi\fR),
metric (imperial) (\fBmi\fR, default), imperial (metric) (\fBim\fR). If metric or imperial
not found,sets to default value, or \fBN/A\fR.
New version, new man. Bug fixes, feature updates. The main reason to release this earlier than I had hoped was because of the /sys permission change for serial/uuid file data. The earlier we can get this fix out, the better for end users, otherwise they will think they have no serial data when they really do. FIXES: 1. this bug just came to my attention, apparently the (I assume) kernel people decided for us that we don't need to see our serial numbers in /sys unless we are root. This is an unfortunate but sadly predictable event. To work around this recent change (somewhere between 4.14 and 4.15 as far as I can tell), inxi -M and -B now check for root read-only and show <root required> if the file exists but is not user readable. I wish, I really wish, that people could stop changing stuff for no good reason, but that's out of my control, all I can do is adjust inxi to this reality. But shame on whoever decided that was a good idea. This is not technically an inxi bug, but rather a regression, since it's caused by a change in /sys permissions, but users would see it as a bug so I consider this an important fix. Note that the new /sys/class/dmi/id permissions result in various possible things: 1. serial/uuid file is empty but exists and is not readable by user 2. serial/uuid file is not empty and exists and is not readable by user 3. serial/uuid file does not exist 4. serial/uuid file exists, is not empty, and is readable by root Does this change make your life better? It doesn't make mine better, it makes it worse. Consider filing a bug report against whoever allowed this regression is my suggestion. BUGS: 1. A weather bug could result in odd or wrong data showing in weather output, this was due to a mistake in how the weather data was assembled internally. This error could lead to large datastore files, and odd output that is not all correct. 2. More of an enhancement, but due to the way 'v' is used in version numbers, the program_version tool in some cases could have sliced out a 'v' in the wrong place in the version string, and also could have sliced out legitimate v values. This v issue also appeared in bios version, so now the new rule for program_version and certain other version results is to trim off starting v if and only if it is followed by a number. FEATURES: 1. Added in OpenBSD support for showing machine data without having to use dmidecode. This is a combination of systcl -a and dmesg.boot data, not very good quality data sources, but it is available as user, and it does work. Note that BIOS systems are the only ones tested, I don't know what the syntax for UEFI is for the field names and strings. Coming soon is Battery and Sensors data, from the same sources. Sadly as far as I know, OpenBSD is the only BSD that has such nice, usable (well, ok, dmesg.boot data is low quality strings, not really machine safe) data. I have no new datasets from the other BSDs so I don't know if they have decided to copy/emulate this method. 2. By request, and this was listed in issue #134, item no. 1, added in weather switchable metric/imperial output. Also added an option, --weather-unit and configuration item: WEATHER_UNIT with possible values: cf|fc|c|f. The 2nd of two in cf/fc goes in () in the output. Note that windspeed is m/s or km/h as metric, inxi shows m/s as default for metric and (km/h as secondary). Also fixed -w observation date to use local time formatting. That does not work in -W so it shows the default value. 3. Updated man to show new WEATHER_UNIT config option, and new --weather-unit option. Also fixed some other small man glitches that I had missed.
2018-05-11 20:53:26 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-y\fR,\fB \-\-width <integer>\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
This is an absolute width override which sets the output line width max.
Overrides \fBCOLS_MAX_IRC\fR / \fBCOLS_MAX_CONSOLE\fR globals, or the
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
actual widths of the terminal. \fB80\fR is the minimum width supported.
\fB\-1\fR removes width limits. Example: \fBinxi \-Fxx\ \-y 130\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-z\fR,\fB \-\-filter\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Adds security filters for IP addresses, serial numbers, MAC,
location (\fB\-w\fR), and user home directory name. On by default for IRC clients.
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location=<location string> This lets users send an alternate location using either <city,state> or <postal code> or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-Z\fR,\fB \-\-filter\-override\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Absolute override for output filters. Useful for debugging networking
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
issues in IRC for example.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH EXTRA DATA OPTIONS
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
These options can be triggered by one or more \fB\-x\fR.
Alternatively, the \fB\-v\fR options trigger them in the following
way: \fB\-v 3\fR adds \fB\-x\fR;
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fB\-v 6\fR adds \fB\-xx\fR; \fB\-v 7\fR adds \fB\-xxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
These extra data triggers can be useful for getting more in\-depth
data on various options. They can be added to any long form option list,
New version, man page. Major man page edits. Bug fixes. Bugs fixed: 1. RAID - both mdraid and zfs bugs corrected. Issue #135 2. EPYC cpu wrong die count corrected, and also added support for the EPYC type. Issue #135 3. Possible ARM data glitch that made reader fail on a non-existent file. Man: Ongoing updates and edits and corrections and cleanup. Slowly but surely.
2018-03-31 03:12:25 +00:00
e.g.: \fB\-bxx\fR or \fB\-Sxxx\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
There are 3 extra data levels:
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR
OR
\fB\-\-extra 1\fR, \fB\-\-extra 2\fR, \fB\-\-extra 3\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
The following details show which lines / items display extra information for each
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
extra data level.
tweaked man page new tar.gz
2012-10-19 19:43:26 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-A\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds version/port(s)/driver version (if available) for each Audio
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
device.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds PCI Bus ID/USB ID number of each Audio device.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-B\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds vendor/model, battery status (if battery present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds attached battery powered peripherals (\fBDevice\-[number]:\fR) if
detected (keyboard, mouse, etc.).
.TP
.B \-x \-C\fR
\- Adds bogomips on CPU (if available)
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds CPU Flags (short list).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds CPU microarchitecture + revision (e.g. Sandy Bridge, K8, ARMv8, P6,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
etc.). Only shows data if detected. Newer microarchitectures will have
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
to be added as they appear, and require the CPU family ID and model ID.
New version, tarball, man page. More cpu arch fixes, and added stepping/release info as well so you can see which revision of the cpu microarchitecture your cpu has. Also fixed a few random vm id issues, I found cases where systemd believes it's bochs but it is actually kvm, so now the systemd data is not fully trusted, but is confirmed.
2017-07-29 01:42:17 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Examples: \fBarch: Sandy Bridge rev: 2\fR, \fBarch: K8 rev.F+ rev: 2\fR
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-d\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds more items to \fBFeatures\fR line of optical drive;
dds rev version to optical drive.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-D\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds HDD temperature with disk data if you have hddtemp installed, if you are root
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
or if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.B <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-G\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds direct rendering status.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds (for single GPU, nvidia driver) screen number that GPU is running on.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds PCI Bus ID/USB ID number of each Graphics card.
tweaked man page new tar.gz
2012-10-19 19:43:26 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-i\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds IP v6 additional scope data, like Global, Site, Temporary for
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
each interface.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note that there is no way I am aware of to filter out the deprecated
IP v6 scope site/global temporary addresses from the output of
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\fBifconfig\fR. The \fBip\fR tool shows that clearly.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-temporary\fR \- (\fBip\fR tool only), scope global temporary.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
Scope global temporary deprecated is not shown
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-global\fR \- scope global (\fBifconfig\fR will show this for
all types, global, global temporary, and global temporary deprecated,
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fBip\fR shows it only for global)
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-link\fR \- scope link (\fBip\fR/\fBifconfig\fR) \- default
for \fB\-i\fR.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBip\-v6\-site\fR \- scope site (\fBip\fR/\fBifconfig\fR). This has been
deprecated in IPv6, but still exists. \fBifconfig\fR may show multiple site
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
values, as with global temporary, and global temporary deprecated.
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\fBip\-v6\-unknown\fR \- unknown scope
small man page fix, forgot to move the -i valuues to -x -i section
2017-05-31 22:41:17 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-I\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds current init system (and init rc in some cases, like OpenRC).
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
With \fB\-xx\fR, shows init/rc version number, if available.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds default system gcc. With \fB\-xx\fR, also show other installed gcc
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
versions.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds current runlevel (not available with all init systems).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- If in shell (i.e. not in IRC client), adds shell version number, if available.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-m\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- If present, adds maximum memory module/device size in the Array line.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Only some systems will have this data available. Shows estimate if it can
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
generate one.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device type in the Device line.
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-N\fR
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Adds version/port(s)/driver version (if available) for each Network card;
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds PCI Bus ID/USB ID number of each Network card.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-R\fR
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
\- md\-raid: Adds second RAID Info line with extra data: blocks, chunk size,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
bitmap (if present). Resync line, shows blocks synced/total blocks.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
\- Hardware RAID: Adds driver version, bus ID.
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location=<location string> This lets users send an alternate location using either <city,state> or <postal code> or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
.TP
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
.B \-x \-s\fR
\- Adds basic voltages: 12v, 5v, 3.3v, vbat (\fBipmi\fR, \fBlm-sensors\fR if present).
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-S\fR
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
\- Adds desktop toolkit (\fBtk\fR), if available (Xfce/KDE/Trinity only).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
\- Adds Kernel gcc version.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
\- Adds to \fBDistro:\fR \fBbase:\fR if detected. System base will only be seen on
a subset of distributions. The distro must be both derived from a parent distro (e.g. Mint from
Ubuntu), and explicitly added to the supported distributions for this feature. Due to
the complexity of distribution identification, these will only be added as relatively solid
methods are found for each distribution system base detection.
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-x \-t\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds memory use output to CPU (\fB\-xt c\fR), and CPU use to memory
(\fB\-xt m\fR).
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
.B \-x \-\-usb\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- For \fBDevices\fR, adds USB version/speed.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-x \-w\fR,\fB \-W\fR
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
\- Adds humidity and barometric pressure.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds wind speed and direction.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-A\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds vendor:product ID for each Audio device.
Actual new version, support for -xx option for A, G, and N, outputs vendor:product string if found. Updated --help, updated inxi.1.gz man file, updated inxi.tar.gz file. I think that's it unless there's a bug fix.
2012-10-19 19:28:31 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-B\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds serial number, voltage (if available). Note that \fBvolts\fR shows the
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
data (if available) as the voltage now / minimum design voltage.
New Feature, new version, new man page, new tarball. Laptop users should be happy, -B option now shows, if available, battery data. Quite good data for systems with /sys battery data, only rudimentary for systems using dmidecode (BSDs). dmidecode has no current voltage/charge/current supported capacity. Main row shows charge and condition. Condition shows you have much capacity the battery currently has vs its design capacity. Charge shows the Wh/percent of current capacity of battery (NOT the rated design capacity). -x adds battery vendor/model info, and battery status (like, charging, discharging, full). -xx adds battery serial number and voltage information. Note that voltage information is presented as Current Voltage / Designed minimum voltage. -xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in that makes the cycle count always be 0, I don't know if that's in the batteries, the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all my datasets so far. For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-D\fR
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
\- Adds disk serial number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new tarball. This version is very peaceful, no big changes, just a few fixes and small new features added. This version corrects a few small glitches reported by users, and adds basic support for disk speed report. Note that this is not as accurate as I'd like, it tries, but there is not a lot of data to be had. Limits of disk speed seems to be, roughly: 1. most speed is reported as max board can do, not max drive can support 2. usually when speed is reported as lower than max board speed, it's correct, but, as usual, exceptions to this were found during testing. 3. usually if drive is faster than board speed, it reports board speed, but, again, exceptions to this rule were found during testing. However, with this said, it's usually more or less right, at least right in terms of the fastest speed you can expect to get with your board. NVMe was also supported, that's much more complicated because NVMe has >= 1 lane, and each lane has up and down data. The reported speed is max in one direction, and is a function of the PCIe 1,2 20% overhead, and PCIe 3,4,5 ~1.5% overhead. inxi shows the actual usable data rate, not the GT/s rate, which is the total transfers per second the unit supports. So due to the unreliable nature of the data, this is only a -xx option. There is also in general no data for USB, and none for mmcblk (sd cards usually). This feature may be enhanced with a C Perl XS library in the future, we'll see how that goes. FIXES: 1. corrected an issue where a networking card of type Bridge failed to be detected. This is now handled. This was a PCI type I'd never seen before, but it exists, and a user had it, so now it will work as expected for this type. 2. changed the default units in weather to be m (metric) imperial (i). While this is not very intuitive for me, it's easier to explain I think. The previous c / f syntax is supported internally, and inxi will just translate c to m and f to i, so it doesn't matter which is or was used on a config file or with the --weather-unit option. 3. BSD uptime had a parsing glitch, there was a spelling variant I'd never seen in GNU/Linux that broke the regex. This is corrected now. 4. Fixed a few small man page glitches, some ordering stuff, nothing major. 5. Fixed BSD hostname issues. There was a case where a setup could have no hostname, inxi did not handle that correctly. This fix would have applied to gnu/linux as well. 6. Fixed a few bsd, openbsd mostly, dm detections, there is a secondary path in OpenBSD that was not checked. This also went along with refactoring the dm logic to be much more efficient and optimized. 7. Fine tuned dmidecode error message. 8. Fixed PCI ID issue, it was failing to catch a certain bridged network type. 9. A more global fix for unhandled tmpfs types, in this case, shm, but added a global test that will handle all tmpfs from now on, and exclude that data from -p reports. NEW FEATURES: 1. First attempt to add basic disk speed (Gb/s). Supported types: ATA, NVMe. No speed data so far handled or found: mmcblk; USB. Also possibly older /dev/hda type devices (IDE bus) may not get handled in all cases. This may get more work in the future, but that's a long ways off. This case oddly was one where BSDs had support for basic disk speed reports before GNU/Linux, but that was really just because it was part of a single data line that inxi parsed for disk data anyway with BSDs. 2. Man items added for -Dxx disk speed options.
2018-05-21 21:45:09 +00:00
\- Adds disk speed (if available). This is the theoretical top speed of the
device as reported. This speed may be restricted by system board limits, eg.
a SATA 3 drive on a SATA 2 board may report SATA 2 speeds, but this is not
completely consistent, sometimes a SATA 3 device on a SATA 2 board reports
its design speed.
NVMe drives: adds lanes, and (per direction) speed is calculated with
lane speed * lanes * PCIe overhead. PCIe 1 and 2 have data rates of
GT/s * .8 = Gb/s (10 bits required to transfer 8 bits of data).
PCIe 3 and greater transfer data at a rate of GT/s * 128/130 * lanes = Gb/s
(130 bits required to transfer 128 bits of data).
For a PCIe 3 NVMe drive, with speed of \fB8 GT/s\fR and \fB4\fR lanes
(\fB8GT/s * 128/130 * 4 = 31.6 Gb/s\fR):
\fBspeed: 31.6 Gb/s lanes: 4\fR
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-G\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds vendor:product ID of each Graphics card.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
added tiny tweak, showing protocol out of x if possible.
2018-04-12 21:26:18 +00:00
\- Adds compositor, if found (experimental).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- For free drivers, adds OpenGL compatibility version number if available.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
For nonfree drivers, the core version and compatibility versions are usually
the same. Example:
man page fix, forgot to put one advanced option per item for -G
2017-06-09 19:39:43 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\fBv: 3.3 Mesa 11.2.0 compat\-v: 3.0\fR
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
\- If available, shows \fBalternate:\fR Xorg drivers. This means a driver on
the default list of drivers Xorg automatically checks for the card, but which
is not installed. For example, if you have \fBnouveau\fR driver, \fBnvidia\fR would
show as alternate if it was not installed. Note that \fBalternate:\fR does NOT mean you
should have it, it's just one of the drivers Xorg checks to see if is present
and loaded when checking the card. This can let you know there are other driver options.
Note that if you have explicitly set the driver in \fBxorg.conf\fR, Xorg will not
create this automatic check driver list.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-I\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds init type version number (and rc if present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds other detected installed gcc versions (if present).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds system default runlevel, if detected. Supports Systemd/Upstart/SysVinit
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
type defaults.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds parent program (or tty) that started shell, if not IRC client.
New version, new tarball, new man page. Fixed an old bug where if you start inxi with an ssh command sometimes it will not show any client information, just the debugger PPID output. Now it will test as a final check to see if it can detect any parent to the process. Actually grandparent I believe. Seems to work, it's a fringe case but why not handle it? New -xx feature, for -I it will show, if inxi is not running in IRC client and if is running in X, and if the grandparent is not 'login', will show the application the shell is running in. Example: Info: Processes: 271 Uptime: 5:36 Memory: 3255.8/4048.5MB Runlevel: 3 Gcc sys: 4.7.2 alt: 4.0/4.2/4.4/4.5/4.6 Client: Shell (bash 4.2.37 - started in konsole) inxi: 1.8.33
2013-01-29 00:03:06 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-m\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds memory device Manufacturer.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds memory device Part Number (\fBpart\-no:\fR). Useful for ordering new or
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
replacement memory sticks etc. Part numbers are unique, particularly
if you use the word \fBmemory\fR in the search as well. With \fB\-xxx\fR,
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
also shows serial number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds single/double bank memory, if data is found. Note, this may not be 100% right
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
all of the time since it depends on the order that data is found in \fBdmidecode\fR
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
output for \fBtype 6\fR and \fBtype 17\fR.
New version, new tarball. Another logic redo to handle a fringe case (dmidecode places type 17 in front of type 16), now each array is created as a multidimenstional, 2x array, and each device is a 3 dimensional array. This seems to clean up the problems with bad ordering of dmidecode data.
2014-08-16 23:24:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-M\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds chassis information, if data is available. Also shows BIOS
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
ROM size if using \fBdmidecode\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-N\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds vendor:product ID for each Network card.
Actual new version, support for -xx option for A, G, and N, outputs vendor:product string if found. Updated --help, updated inxi.1.gz man file, updated inxi.tar.gz file. I think that's it unless there's a bug fix.
2012-10-19 19:28:31 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-R\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- md\-raid: Adds superblock (if present) and algorithm. If resync,
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
shows progress bar.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
\- Hardware RAID: Adds Chip vendor:product ID.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, new man. Small new enhancements. 1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2 voltages 2. enhanced wm: feature, needed more filters and protection against redundant data 3. basic apple osx fixes to keep it from crashing, but I'm not spending any more time on apple junk unless someone pays me for my time, I can't stand the product or company, it's the total antitheses of freedom or free software, or even openness. 4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight 5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not a reliable measurement but should be right about 95+ percent of the time, and basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM. When it doesn't know it does not guess, and shows N/A. 6. bsd fix for usb, was running numeric action on string value 7. fixed stderr tool for program_version, now it's hard-coded in program_values which removes an unneded regex search for every program version test. 8. Mate detection, switched to using mate-sesssion instead of mate-about, the latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
.B \-xx \-s\fR
\- Adds DIMM/SOC voltages, if present (\fBipmi\fR only).
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-S\fR
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
\- Adds display manager (\fBdm\fR) type, if present. If none, shows N/A.
Supports most known display managers, including gdm, gdm3,
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
idm, kdm, lightdm, lxdm, mdm, nodm, sddm, slim, tint, wdm, and xdm.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- Adds, if run in X, window manager type (\fBwm\fR), if available.
Not all window managers are supported. Some desktops support using more than one
window manager, so this can be useful to see what windom manager is actually running.
If none found, shows nothing. Uses a less accurate fallback test of \fBps\fR
data if \fBwmctrl\fR is not installed.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-\-slots\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds slot length.
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather and system time there. -x adds time zone, which is useful for servers, particurly web servers. -x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line, if data is available, heat index, wind chill, and dew point. -xxx also adds a line for location (blocked by irc/-z) / weather observation time. -z filter applies as usual to location data, removes it in irc by default. -Z overrides override. The api this uses is probably going to be dropped at some point, so this is just going to work while it works, then it will need to be updated at some point, so don't get very attached to it. Also adds option to, with -w: -! location=<location string> This lets users send an alternate location using either <city,state> or <postal code> or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order must be as listed. If There is a developer flag if distro maintainers do not want this enabled, simply set: B_ALLOW_WEATHER='false' before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-\-usb\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds vendor:chip id.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xx \-w\fR,\fB \-W\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds wind chill, heat index, and dew point if any of these are available.
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
.TP
.B \-xxx \-A\fR
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows
specific vendor [product] information.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-xxx \-B\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Adds battery chemistry (e.g. \fBLi\-ion\fR), cycles (NOTE: there appears to
be a problem with the Linux kernel obtaining the cycle count, so this almost
always shows \fB0\fR. There's nothing that can be done about this glitch, the
data is simply not available as of 2018\-04\-03), location (only available from
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBdmidecode\fR derived output).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds attached device \fBrechargeable: [yes|no]\fR information.
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-D\fR
New version, new tarball. New features, bug fixes. This is a big one. NEW FEATURES: 1. By Request: Disk vendor is now generally going to be shown. Since this uses empirical data to grab the vendor name, from the model string, it will not always find anything. When it fails to find vendor data, no vendor: item will show. Note that some MMC devices will probably not show vendor data, but that's due to there being no data that reveals that. 2. Extended -sx volts to also show voltage from lm-sensors if present. Many systems show no voltage data with lm-sensors, but now if any is found, it will show, same as impi. 3. Moved to lsblk as primary source for partition/unmounted filesystem, uuid, and label data. Falls back to previous methods if lsblk does not return data. Some lsblk do not show complete data unless super user as well. 4. Refactored code to be more logical and clear. 5. Added for OpenBSD -r: /etc/installurl file. BUG FIXES: 1. CRITICAL: /sys/block/xxx/device/model is in some cases truncating the disk model name to 16 characters. This is not an inxi bug, it's a bug with /sys itself. To fix this, inxi now uses for GNU/Linux /dev/disk/by-id data which does not ever do this truncation. It's also faster I believe to read that directory once, filter the results, then use the data for vendor/model/serial. this was also part of the disk vendor data feature. 2. Openbsd networking fix. Was not showing IF data, now it does. 3. Fixed bug with unmounted where sometimes md0 type partitions would show even though they are in a raid array. 4. Fixed disk rev, now it searches for 3 different files in /sys to get that data. 5. Fixed bug with very old systems, with sudo 1.6 or older, for some reason that error did not get redirected to /dev/null, so now only using sudo -n after explicit version test, only if 1.7 or newer. 6. Fixed a few null results in fringe cases for graphics. Resolution now shows NA for Hz if no hz data found. This was only present on a fringe user case which is unlikely to ever impact normal X installations. 7. Fixed BSD L2 cache, was showing MiB instead of KiB, wrong math.
2018-05-07 03:43:34 +00:00
\- Adds disk firmware revision number (if available).
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds disk partition scheme (in most cases), e.g. \fBscheme: GPT\fR. Currently not
able to detect all schemes, but handles the most common, e.g. \fBGPT\fR or \fBMBR\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds disk rotation speed (in some but not all cases), e.g. \fBrotation: 7200 rpm\fR.
Only appears if detected (SSD drives do not have rotation speeds, for example). If none
found, nothing shows. Not all disks report this speed, so even if they are spinnning,
no data will show.
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.TP
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
.B \-xxx \-G\fR
\- Adds (if available and/or relevant) \fBvendor:\fR item, which shows
specific vendor [product] information.
.TP
New version, new man. Bug fixes, new features, enhancements 1. Bug: cause unknown, but crashes on null file sent to reader, but all those files have been checked. For now added return if file null. 2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show running in: xfce-terminal (SSH) ssh session active on remote system. Various help and man cleanups and additions.
2018-03-29 03:57:19 +00:00
.B \-xxx \-I\fR
\- For \fBShell:\fR adds \fB(su|sudo|login)\fR to shell name if present.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- For \fBrunning in:\fR adds \fB(SSH)\fR to parent, if present. SSH detection
New version, new man. Bug fixes, new features, enhancements 1. Bug: cause unknown, but crashes on null file sent to reader, but all those files have been checked. For now added return if file null. 2. Features: with -Ixxx: show Shell: csh (sudo|su|login) status; show running in: xfce-terminal (SSH) ssh session active on remote system. Various help and man cleanups and additions.
2018-03-29 03:57:19 +00:00
uses the \fBwho am i\fR test.
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-m\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds memory bus width: primary bus width, and if present, total width. e.g.
\fBbus width: 64 bit (total: 72 bits)\fR. Note that total / data widths are mixed up
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
sometimes in dmidecode output, so inxi will take the larger value as the total if
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
present. If no total width data is found, then inxi will not show that item.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device Type Detail, e.g. \fBdetail: DDR3 (Synchronous)\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- Adds, if present, memory module voltage. Only some systems will have this
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
data available.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- Adds device serial number.
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-R\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- md\-raid: Adds system mdraid support types (kernel support, read ahead, RAID events)
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\- zfs\-raid: Adds portion allocated (used) by RAID array/device.
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
\- Hardware RAID: Adds rev, ports, and (if available and/or relevant)
\fBvendor:\fR item, which shows specific vendor [product] information.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-xxx \-S\fR
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- Adds, if run in X and present, shell/panel type (\fBinfo\fR).
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If none, shows nothing. Supports some current desktop extras like gnome\-panel,
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
lxpanel, xfce4\-panel, lxqt\-panel, and others (Mint feature request).
\- Adds (if present), window manager (\fBwm\fR) version number.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, new man. Fine tunings. New features: 1. for a very few systems that have wmctrl installed, will shows -xxx wm if present Enhancements: 1. made xorg display server and protocols show more consistently with other layout: Display: x11 server: X.org 1.9.12 drivers: loaded: ... if no display protocol found: Display: server: X.org 1.9.12 drivers: loaded: ... This brings the -G in line with the other lines, of not putting different data types inside of parentheses as much as possible. -I still has two of these, but so far it's not clear how to otherwise show SSH or su/sudo/login in their respective spaces. Debugger data collector also has something I should have added ages ago, gz filename now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily determine the debugger inxi version, and thus avoid having to root through lots of versions to find new stuff. These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx now offering wm: if present. Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data to be more consistent, while not adding great length to the output. These two changes should also help export to json/xml since that puts unique key/values back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-xxx \-w\fR,\fB \-W\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Adds location (city state country), altitude, weather observation time.
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.SH ADMIN EXTRA DATA OPTIONS
These options are triggered with \fB\-\-admin\fR. Admin options are advanced output options,
and are more technical, and mostly of interest to system administrators or other machine admins.
The \fB\-\-admin\fR option only has to be used once, and will trigger the following features.
.TP
.B \-\-admin \-C\fR
\- Adds CPU family, model\-id, and stepping (replaces \fBrev\fR of \fB\-Cx\fR).
Format is \fBhexadecimal (decimal)\fR if greater than 9, otherwise \fBhexadecimal\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds CPU microcode. Format is \fBhexadecimal\fR.
New version, new man. Big bug fix, new features. Bugs: 1. Finally tracked down and solved the Xorg drivers bug which was caused by Xorg checking its list of defaults 2 times, not 1, which resulted in failed status on second try since it was already loaded. Secondary bug was found that resulted in failing to show the failed, and only showing unloaded, which was also wrong. This finally fixes issue #134 item 5. Thanks Mint users for the help on that one. 2. Small bug in Openbox version detection, typo. 3. fixed a small glitch in the dm: detection that on systems where /var/run exists but is not linked to /run, the dm would fail to get detected. Fixes: 1. Xfce when defaulting to no version found goes to 4, this is a bad idea, it's better to not show any version, since xfcie could one day be 5. 2. Fixed Blackbox fallback detection, there were cases where Blackpox not found in xprop -root, now it falls back to ps aux detection. 3. For wm: tested all known variants, added support for things like Mutter (Marco) syntax. Note that bunsenlab uses XDG_CURRENT_DESKTOP=XFCE to work around some glitches, but it's actually Openbox. If run as root, it will show openbox correctly, otherwise -Sxxx will show wm: openbox, but that's due to bunsenlabs choices there. 4. Rewrote a lot of DistroData to handle more dynamic testing of values, it's sad that at almost 2020 we are still stumbling around trying to find a consistent way to identify distros, and derived distros. 5. Added more debugger data collectors in the logging, some data was not being tracked well during log process which made debugging harder. Enhancements: 1. New feature, -Gxx now shows for Xorg drivers alternate: which are drivers that Xorg auto checks but which are not installed. Those were ignored in the past. This can be useful to see for example that there are other driver install options available. Thanks gm10 for that suggestion. 2. Tested and added the following explicit handlers for Distros: and base: in some cases: grml, peppermint, kali, siduction, aptosid, arco, manjaro, chakra, antergos, bunsenlabs, and a few others. These are a pain to add and test, basically I have to boot a live cd of each one, then test the files and ID methods, but the ID methods must also be as dynamic as possible because you never know when a distro is going to change how they use os-release vs issue vs lsb-release vs <name>-release. I would have tested a few more but their livecds failed to properly run on vbox. 3. Added a few more disk vendor IDs. 4. Added some more programs to debugger data collector for future feature vdpau, but that needs more data because we don't really know the variants for example for dual card systems. 5. Man page: changed extra options to use only one option name per list of options for that feature, each separe item is started as a new paragraph with - This makes it a bit more consistent and maybe slightly easier to read the man. Added -Gxx item, updated -Sx item.
2018-07-03 21:36:15 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
\- Adds CPU Errata (bugs) as known by your current kernel.
New version, updated man page, new tarball. Fixed partition bug that could falsely identify a remote filesystem like nfs as /dev fs Added two options: -! 31 - Turns off Host section of System line. This is useful if you want to post output from server without posting its name. -! 32 - Turns on Host section if it has been disabled by user configuration file B_SHOW_HOST='false' Added missing CPU data message, fixed missing cpu cache/bogomips output, turned off bogomips if null for bsd systems because bogomips is a linux kernel feature. Added N/A for no memory report, this would mainly hit bsd systems where user has no permissions to use sysctl or has no read rights for /var/run/dmesg.boot. Many fixes for partitions, now for bsd, if available, uses gpart list to get uuid/label Added support for raid file system syntax in bsd, now excludes main raid device name, and adds a flag to raiddevice/partitionname type so output can identify it as a raid slice/partition. In man page, added -! 31 / -! 32 sections, and some other small edits. Added bsd raid line error message, added bsd sensors line error message. Many other small bug fixes that should make linux more robust in terms of missing data, and better/cleaner output for bsd.
2013-02-18 20:33:05 +00:00
.SH ADVANCED OPTIONS
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 40\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Bypass \fBPerl\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Curl, Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 41\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Bypass \fBCurl\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Curl, Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.TP
.B \-\-alt 42\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Bypass \fBFetch\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Curl, Wget, Fetch, (OpenBSD only) ftp.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-alt 43\fR
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Bypass \fBWget\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
Curl, Wget, Fetch, OpenBSD only: ftp
.TP
.B \-\-alt 44\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Bypass \fBCurl\fR, \fBFetch\fR, and \fBWget\fR as downloader options. This
basically forces the downloader selection to use \fBPerl 5.x\fR \fBHTTP::Tiny\fR,
which is generally slower than \fBCurl\fR or \fBWget\fR but it may help bypass
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
issues with downloading.
New version, tarball, man page. New option -! 40 which lets you get gfx information out of X. Default will get data from display :0, but if you append :[display-number] to -! 40, it will use that display instead, for example: inxi -! 40:1 would get information from display 1. Note that most multi-monitor setups use :0 for both monitors, depending on how it's setup. This will also let users see any desktop information based on xrop -root output, but it will depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for primary detection would not work, for example.
2017-06-09 02:29:55 +00:00
.TP
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
.B \-\-display [:<integer>]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Will try to get display data out of X (does not usually work as root user).
Default gets display info from display \fB:0\fR. If you use the format
\fB\-\-display :1\fR then it would get it from display \fB1\fR instead,
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
or any display you specify.
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Note that in some cases, \fB\-\-display\fR will cause inxi to hang endlessly when
running the option in console with Intel graphics. The situation regarding
other free drivers such as nouveau/ATI is currently unknown. It may be that
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
this is a bug with the Intel graphics driver \- more information is required.
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
You can test this easily by running the following command out of X/display server:
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBglxinfo \-display :0\fR
slight typo in --help and man page for -! 40 option.
2017-06-10 21:42:49 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
If it hangs, \fB\-\-display\fR will not work.
New version, tarball, man page. New option -! 40 which lets you get gfx information out of X. Default will get data from display :0, but if you append :[display-number] to -! 40, it will use that display instead, for example: inxi -! 40:1 would get information from display 1. Note that most multi-monitor setups use :0 for both monitors, depending on how it's setup. This will also let users see any desktop information based on xrop -root output, but it will depend how it works based on how environmental variables have been set. gnome and kde, which use XDG for primary detection would not work, for example.
2017-06-09 02:29:55 +00:00
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
.B \-\-dmidecode\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Force use of \fBdmidecode\fR. This will override \fB/sys\fR data in some lines,
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
e.g. \fB\-M\fR or \fB\-B\fR.
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-downloader [curl|fetch|perl|wget]\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Force inxi to use Curl, Fetch, Perl, or Wget for downloads.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
.B \-\-host\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Turns on hostname in System line. Overrides inxi config file value (if set):
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBSHOW_HOST='false'\fR
.TP
.B \-\-indent\-min [integer]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Overrides default indent minimum value. This is the value that makes inxi change from
wrapped line starters [like \fBInfo\fR] to non wrapped. If less than \fB80\fR,
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
no wrapping will occur. Overrides internal default value and user configuration value:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBINDENT_MIN=85\fR
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
Small glitch on man page, that's fixed.
2017-11-29 01:28:28 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-limit [\-1 \- x]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Raise or lower max output limit of IP addresses for \fB\-i\fR. \fB\-1\fR removes limit.
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
.B \-\-man\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Updates / installs man page with \fB\-U\fR if \fBpinxi\fR or using \fB\-U 3\fR dev branch.
New version, new man. Bug fixes, feature tweaks. Bugs fixed: 1. json/xml outputter had a bug in it that made it validate path wrong. 2. -G -xx option: compositor: for gnome-shell had a bug that would make it show as running when it wasn't, other strings were tripping the match on systems with gnome-shell installed but not running, 3. Finally fixed bug with manjaro full version distro string, and tweaked output to show Manjaro Linux instead of given string. Features added: 1. --no-man - this lets users turn off man installs. Only really useful for -U from master, since default is off for pinxi and dev 3 branch. Man page/help updated to add this option.
2018-03-26 01:42:49 +00:00
(Only active if \fB\-U\fR is is not disabled by maintainers).
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
New version, new man page. Bug fixes, feature/output tweaks. Bugs fixed: 1. stray undefined value corrected 2. fixed BSD no pkg server case, now shows correctly that no pkg server files were found, not that the OS is not supported. Features: 1. -t c and m headers cleaned up and simplified 2. man page edits. 3. more standarization of key names for fields, some spelling and upper/lower case corrections.
2018-03-26 22:03:15 +00:00
.B \-\-no\-host\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Turns off hostname in System line. Useful, in combination with \fB\-z\fR,
for anonymizing inxi output for posting on forums or IRC. Same as
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
configuration value:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBSHOW_HOST='false'\fR
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
New version, new man. Bug fixes, feature tweaks. Bugs fixed: 1. json/xml outputter had a bug in it that made it validate path wrong. 2. -G -xx option: compositor: for gnome-shell had a bug that would make it show as running when it wasn't, other strings were tripping the match on systems with gnome-shell installed but not running, 3. Finally fixed bug with manjaro full version distro string, and tweaked output to show Manjaro Linux instead of given string. Features added: 1. --no-man - this lets users turn off man installs. Only really useful for -U from master, since default is off for pinxi and dev 3 branch. Man page/help updated to add this option.
2018-03-26 01:42:49 +00:00
.TP
.B \-\-no\-man\fR
edit man page, made mistake, this is the real 2.9.07 release
2018-03-26 01:48:30 +00:00
Disables man page install with \fB\-U\fR for master and active development branches.
New version, new man. Bug fixes, feature tweaks. Bugs fixed: 1. json/xml outputter had a bug in it that made it validate path wrong. 2. -G -xx option: compositor: for gnome-shell had a bug that would make it show as running when it wasn't, other strings were tripping the match on systems with gnome-shell installed but not running, 3. Finally fixed bug with manjaro full version distro string, and tweaked output to show Manjaro Linux instead of given string. Features added: 1. --no-man - this lets users turn off man installs. Only really useful for -U from master, since default is off for pinxi and dev 3 branch. Man page/help updated to add this option.
2018-03-26 01:42:49 +00:00
(Only active if \fB\-U\fR is is not disabled by maintainers).
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
.TP
.B \-\-no\-ssl\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Skip SSL certificate checks for all downloader actions (\fB\-U\fR, \fB\-w\fR,
\fB\-W\fR, \fB\-i\fR). Use if your system does not have current SSL certificate
lists, or if you have problems making a connection for any reason. Works with
\fBWget\fR, \fBCurl\fR, and \fBFetch\fR only.
New version, new man. Options changes To get rid of some non-intuitive options, I've changed some of the --alt values to more obvious argument names; --dmidecode --no-ssl --no-host --host This makes them easier to remember, hopefully. Updated help, man pages to cover this change as well. Added some more lsblk debugger output to try to start building enough information to really figure out dm/encrypted/lvm and how those are actually handled internally in the system in terms of partitions, filesystems, etc.
2018-03-24 09:18:41 +00:00
Small glitch on man page, that's fixed.
2017-11-29 01:28:28 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-output [json|screen|xml]\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Change data output type. Requires \-\-output\-file if not fBscreen\fR.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
New version, new man. Big update, corrects many small typos, adds some good new features. So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on systems that do not have -U blocked. The -U block of course remains the same. New features: 1. now does not require root or 'file' to get unmounted fs type. Also, for many mounted partitions, rather than showing the meaningless fuseblock it will usually get the filesystem right. 2. -U now works with optional --man option to download man page for pinxi and -U 3 dev server updates. This gets around the fact I had to remove the gz files from master to get the size small enough to make maintainers happy. Non branch inxi master works as before, updates both from github or from dev server, depending on your selection. 3. Thanks very much to the people who have been contributing in a positve way, helping to make inxi better. The untold number of small and large new features, small glitches, etc, that have been fixed this week are simply too many too list. Many to most were inxi bugs or weaknesses, now corrected. 4. binxi branch has now been made fully operational, though I do not plan on doing any work beyond the mothballing of that venerable program (gawk->bash inxi), it's fully operational, it updates, it gets its man page, but all as binxi, so you can, as with pinxi, run all of them separately. This officially terminates my support for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch. 5. pinxi has been promoted to permanent development branch, where bug fixes, new features, etc, will be tested, along with man page updates etc. This will help reduce the number of commits to master branch. 6. Audio / Network usb cards now show the true driver(s). There are often more than one for audio, that's a nice enancement. 7. inxi outputs to json / xml, which will probably interest some developers eventually, well it already did, that was going to wait, but someone wanted it. 8. Apt repo handler now supports DEB822 format, which is not an easy format to parse. ========================================================== MAINTAINERS: Note the following: despite my strong dislike for tags, every commit that touches either inxi or inxi.1 man page will be tagged if I think they would be something relevant to distro packagers. While github insists on calling my tags releases, I want to be crystal clear: inxi has one and only one 'release', the current master branch version. The tagged commits that github calls releases are NOT releases, they are just tagged commits. The version I release tomorrow will be the current master, and all previous versions will be obsolete and will not be supported. The .gz files have been removed from the master branch history, thus shrinking it a lot. I have removed for this reason the master-plain branch, which mirrored master and provided a gz free branch, but apparently this was simply ignored so there's no reason to keep it going. If you insist on grabbing all the branches and find more data in there, then please correct your practices, you are only getting the data from the master branch. inxi is rolling release software and has no releases, so the tags are supposed to create some illusion that a tag actually means something. Since it doesn't, I decided to take the path of least resistance and just add an auto tagging tool to my commit scripts and use it when it seems appropriate, like on this commit. All development work now will happen via the pinxi branch, so that makes the process a lot cleaner, since I can now basically beta test all new commmits to master. pinxi and binxi are both standalone versions of inxi, they have their own config and data directories, config files, man pages, etc. ----------------------------------------------------- New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate, and most bugs being fixed now are because a lot of people are contributing eyes and testing, and are finding stuff that was wrong, or simply missing, on old inxi as well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi since the entire reason I spent over 4 months on this project was to never have to touch Gawk/Bash inxi again. Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been nearly impossible to work on despite my following rigorous practices in coding, and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight in comparison, and makes adding new features, enhancing others, far easier, or even possible, where it wasn't before. On a technical level, I have tested Perl inxi heavily, and it will run on all Perl 5.x versions back to 5.008, which is the cutoff point. This was not that hard to do, which is why I picked Perl 5.x as the language. This means that you can drop, just as with binxi, Perl inxi onto a 10 year old system, or older, and it will run fine, albeit a touch slowly, but must faster than binxi. ----------------------------------------------------- So far users are really liking the new one, it's usually faster in most cases, the output is cleaner, there's more data, more options, and basically it's gotten the thumbs up from all the testers, and there have been a LOT, who have helped. I want to give a special thanks to the following distros for their exceptional support and testing: 0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt have been been incredibly helpful when it comes to testing and debugging, and finding corner cases that I would never have found. 1. AntiX: they were the first to beta test pinxi, and found massive numbers of bugs, and stuck with the testing for a long time. They made testing possible for the next wave of testers, my hats off to them, I've always liked them. 2. Manjaro also was very helpful, and found more issues and enhancements. 3. Ubuntu forums users found more, and helped enhance many faetures 4. Mint users have been very helpful, and were the impetus for some nifty new features, ilke switching all color codes off when output is piped or sent to file. They have reminded me of how valuable people's views can be who may not share the same tech world view as you, but are still very talented and observant individuals. 5. Slackware users provided some very thoughtful feedback, which was no surprise but welcome nonetheless, thanks. 6. Same with Debian forums, again, some very useful and constructive ideas and observations, and some very arcane and odd hardware that exposed even more corner case bugs. And several other distros were also helpful, each in their own way. Solus for example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-output\-file [full path to output file|print]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
The given directory path must exist. The directory path given must exist,
The \fBprint\fR options prints to stdout.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Required for non\-screen \fB\-\-output\fR formats (json|xml).
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Small glitch on man page, that's fixed.
2017-11-29 01:28:28 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-sleep [0\-x.x]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Usually in decimals. Change CPU sleep time for \fB\-C\fR (current: \fB\0.35\fR).
Sleep is used to let the system catch up and show a more accurate CPU use. Example:
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fBinxi \-Cxxx \-\-sleep 0.15\fR
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Overrides default internal value and user configuration value:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBCPU_SLEEP=0.25\fR
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
.TP
.B \-\-wm\fR
New version, new man. Changes, bug fixes, enhancements! Don't delay! Bugs: 1. A real bug, the detection for true path of /dev/root had a mistake in it and would only have worked in half the cases. This was an easy fix, but a significant but since it also would lead to the actual root / partition showing in Unmounted. 2. Related to the item Fixes-2, if two USB networking devices were attached, the second one's bus and chip ID would go on the wrong line of data if -n or -i option were used. Since that would be the line belonging to the one above, that obviously was weird and wrong. 3. NEW: latest kernel can show hwmon data in sensors, for example from wifi chip. This broke CPU temp detection and showed way too high cpu temp, so this fix is fairly important since new kernels may have this new sensors hwmon syntax. 4. Sensors: IPMI alternate syntax found, also case with no data in expected columns, just N/A, so now the ipmi sensor logic skips all lines with non numeric values in the values column. This is what it should have done all along, it was trusting that values would always exist for the field names it looks for. Fixes: 1. ARM networking fix. ARM devices like rasberry pi that use usb bus for networking showed the no data message even though usb networking was right below it. This is corrected, and now that only shows if both main and usb networking failed for ARM. 2. Big repo fix: while testing distro and Trinity live cds, I discovered that apt is sometimes used with rpms, which made PCLinuxOS and ALT-Linux Repos item show the apt files but no data since the pattern was looking for start with deb. Added rpm to pattern, so all distros that use apt running rpms should now 'just work'. 3. Fixed more distro id things, PCLinuxOS should now show its full distro string. 4. Debugger: Filtered out more blocks of /proc, that data is bloated and messy, found another case where it collected a vast amount of junk system data from zfs in that case, just blocked the entire range. I had no idea /proc had so much junk data in it! 5. As noted above, IPMI, yet another alternate syntax for field names. My hope that IPMI software and sensors will be more logical and consistent than lm-sensors output is proving to be merely wishful thinking, I think now out of 3 datasets I've gotten, I've seen 3 variants for syntax, not to mention the ipmi-tool vs ipmi-sensors differences. So IPMI will be like all sensors stuff, a work in progress, to be updated with every newly discovered alternate syntax and data set. Enhancements: 1. Disk vendors, added some, improved pattern detections for others. This feature is getting better all the time. Thanks linuxlite hw db, easy to scan for missing vendors in their inxi data. 2. Added more wm, budgie-wm, mwm, variants of kwin and Trinity's Twin, several others, more refactoring of core wm/desktop code. 3. Added gpu ram and reworked memory logic for rasberry pi, which is the only SBC I am aware of that uses that tool. Now reports the actual total, and also gpu: for ram data, so you can tell that the gpu is using part of the total. Again, this comes from issue #153. Also added that info to man page for -I part. 4. Added more ARM and PCI cleaners for neater and more concise ARM/PCI output. 5. Added Trinity support to Desktop section, this had at least two different detection methods, but since the first just shows KDE original data, only the second one proved to be Trinity specific. Happily, the full data is available, toolkit, desktop version, and wm (Twin). 6. New -G,-A,-R -xxx feature: vendor:. Note that vendor data is very bloated and messy so it's trimmed down substantially, using a series of filters and rules, and thus it can contain the following: the actual vendor, like Dell, nothing, the motherboard vendor/product for board based PCI items, or a complete vendor/product string if it's unique. I couldn't think of a clean field name that meant: vendor OR vendor + basic product info OR motherboard + board version OR full product name, including vendor, so in the end, I just used vendor: but it's not quite the right term, but nothing else seemed to work better. Testers responded very enthusiastically about this feature so I guess the vendor: name is ok. Changes: 1. Biggest change: Drives: HDD: total: the HDD: is now changed to: Local Storage: This was part of issue #153 and is a good suggestion because HDD generally was used to refer to hard disks, spinning, but with nvme, m.2, ssd, etc, that term is a bit dated. 'Local' is because inxi does not include detected remote storage in the totals. 2. The recent --wm option which forced ps as data source for window manager detection has been reversed, now --wm forces wmctrl and ps aux is preferred. Still falls back to wm ctrl in case the ps test is null, this is better because I have to add the wm data manually for each one, whereas wmctrl has an unknown set and probably variable set of wm. Note that I reversed this because I saw several cases where wmctrl was wrong, and reported a generic source wm instead of the real one. Since most uses are not going to even be aware of the wm: feature as enhanced with --wm switch, this should have no impact on users in general. Since the detected wm name needs to be know to get assigned to wm: and wm version data, I think it will work better to have the known variants match with the wm data values, then just fallback to unknown ones that can get fille in over time as we find wm that people actually use and that you can get version info on and detect. Removed: 1. Got rid of tests for GTK compiled with version for many desktops, that test was always wrong because it did not have any necessary relation to the actual gtk version the desktop was built out of, and it also almost always returned no data. Since this is an expensive and slow test, and is always going to be wrong or empty anyway, I've removed it. My tests showed it taking about 300ms or so to generate no data, heh. That's the tk: feature in -S. Note I also found that gnome-shell takes an absurdly long time to give --version info, the slowest of all such things, 300ms again, just to show version? Someone should fix that, there's no possible reason why it should take 300 milliseconds to give a simple version string. Note that this returns tk: to only returning real data, which in this case means only xfce, kde, and trinity, which are the only desktops that actually report their toolkit data. I'll probably remove that code in the future unless I can think of some real use for gtk version elsewhere, but it's just junk data which doesn't even work. In the future, I will not try to emulate or guess at desktop toolkits, either they show the data in a direct form like XFCE or Trinity or KDE do, or I won't waste resources and execution time making bad guesses using inefficient code and logic. QT desktops like LXQt I'm leaving in because I believe those will tend to track more closely the QT version on the system, and the tests for QT version aren't huge ugly hacks the way they are for GTK, so they aren't as slow or intrusive, but those may also get removed since they almost never work either. But they are also slowing down the -Sx process so maybe they should be removed as well, I'll think about it. Since they only are used on LXQt and razer-qt, it probably isn't a big deal overall.
2018-07-12 21:35:09 +00:00
Force \fBSystem\fR item \fBwm\fR to use \fBwmctrl\fR as data source,
override default \fBps\fR source.
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH DEBUGGING OPTIONS
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug [1\-3]\fR
New version, new man. Several bug fixes, enhancements, options. Bugs: 1. In some cases, -S Desktop showed xfce when it wasn't xfce. This should be largely corrected now. 2. Big bug: using lxqt-about for lxqt --version, now opens a dialog box, gui, so removed that, and now checking lxqt-session for version info instead. Fixes: 1. Now calling hitachi hgst drives vendor: HGST (Hitachi) to differentiate between regular Hitachi and HGST hitachi. Added a few more disk vendors. 2. Distro base and core: added linuxlite, elementary. Some distros use: /etc/upstream-release/lsb-release so testing for that and os-release now too. 3. Extended qt detections, may catch a few stray ones now in non kde qt desktops. 4. Complete refactor of desktop, desktop info, wm, and -G compositor, now much easier to extend each feature and add detections, move order around, etc. Also moved wm to -Sxx now that I use fallback ps aux tests, which were themselves also totally refactored and optimized. Fixed WindowMaker id, which is made more annoying because they are the only upper/lower case program name, but in at least debian, the actual program name is wmaker internally. Also tightened in particular gnome-shell, which was failing to show due to too restrictive filtering of desktop/vm repeats. Most wm do not contain the desktop name in the string, gnome-shell does, only one I'm aware of. 5. Removed N/A from wmctrl output, which just means null, which is what we want. 6. Removed gnome-shell from info: since it will now appear in wm: if found. Added a few -panel items to info: Enhancements: 1. Showing type: network bridge for -N when it's type 0680, which is an odd pci type, generally it's a network bridge, but I figured it's best to show that explicitly to avoid confusion. This extends the 'type:' from just USB. 2. Added more window managers to wm, matchbox, flwm, fvwm2 (used to just use fvwm, this was wrong, it's its own thing), a few others. 3. Added a few more compositors to -Gxx. kwin_x11 should be the most noticeable, but added some more obscure ones too. This feature requires more work. 4. Extended ARM syntax to support a new one, path to /sys/device... has an extra /soc/ in it, that is now handled, all are tested for. Confirmed working. Note that ARM has to be confirmed fixed on a device by device basis, since there are key syntax differences in the paths, but it will get easier the more variants that are discovered. Added another trimmer to cut off \x00|01|02|03 special non printing characters which show as weird jibbberish in output, for model/serial number. 5. Refactored wm, info, desktop, compositor, now all use @ps_gui, which is all that is tested against, not the entire ps_cmd array. This drops the possible tests down massively since the only things in ps_gui will be the actual stuff found that matches all the patterns required for that system, not all ps items. Added marco, muffin fixes. Was showing wm: Metacity (Marco) that is not correct, now shows marco, which then allows to get version too. 5. -Sxxx now shows wm: version as well, which can be of use now and then. 6. --wm added to trip force using of ps data for wm, this can be useful because I don't know all variants of wmctrl output, so that makes it easier to test. 7. Added finally support for --debug 3, which now shows timers, functions, and args printed to screen. 8. Added qmake --version to fallback qt detection.
2018-07-08 23:30:15 +00:00
\- On screen debugger output. Output varies depending on current needs
Usually nothing changes.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 10\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\- Basic logging. Check \fB$XDG_DATA_HOME/inxi/inxi.log\fR or
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\fB$HOME/.local/share/inxi/inxi.log\fR or \fB$HOME/.inxi/inxi.log\fR.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 11\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
\- Full file/system info logging.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 20\fR
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Creates a tar.gz file of system data and collects the inxi output
in a file.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
* tree traversal data file(s) read from \fB/proc\fR and \fB/sys\fR, and
other system data.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
* xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc.
* data from dev, disks, partitions, etc.
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 21\fR
Automatically uploads debugger data tar.gz file to \fIftp.techpatterns.com\fR,
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
then removes the debug data directory, but leaves the debug tar.gz file.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
See \fB\-\-ftp\fR for uploading to alternate locations.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-debug 22\fR
Automatically uploads debugger data tar.gz file to \fIftp.techpatterns.com\fR, then
removes the debug data directory and the tar.gz file.
See \fB\-\-ftp\fR for uploading to alternate locations.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.B \-\-ftp [ftp.yoursite.com/incoming]\fR
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
For alternate ftp upload locations: Example:
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
\fBinxi \-\-ftp \fIftp.yourserver.com/incoming\fB \-\-debug 21\fR
New version, man page. New features and fixes! Bugs: 1. -I line, sometimes running in showed sudo. This is hopefully now corrected. Fixes: 1. CPU architectures, small reordering based on hopefully more reliable data source, but these are hard to find conclusively. 2. -S Distro id: switched ordering of prefered os-release sources, PRETTY_NAME is not being used consistently, too many distros leave out the distro id found in VERSION, so now it uses NAME + VERSION if both are there, then PRETTY_NAME as a fallback. That reverses how it was, but it will provide better results for most distros. Distros that did this properly to begin with should see no change. 3. Now that inxi is basically debugged and working, I've removed the output of 'inxi' from the -t lines. It remains for the pinxi branch however so you can see how many resources pinxi uses to run. 4. ipmi sensors data are proving to be as random as lm-sensors. Added another alternate syntax for sensors. 5. CPU: found an alternate syntax, again, for IPMI and sensors data, added support, I hope, for that. Enhancements: 1. Added /proc debugger tool to debugger. Due to oddities with how the /proc file system is created, it will only run as user, not root, unless the --proc flag is used. More programs added to debugger commands. 2. More disk vendor strings added, fine tuning of vendor detections. There is a tendency in NVMe disk names to put the vendor name in the middle of the string. That is now handled for a few key vendors. 3. Added basic ARM SOC and server support. This will require more work in the future because the syntax used varies significantly device to device, but the featuers are now in place to add that support. Most SBC ARM devices should now at least show the model and details data in machine data, and some will show -G -A -N data as well. 4. ARM CPU: added first attempt to show the cpu variant as well as the more generic ARM data. This shows 1 or more variants, some ARM devices have two different cpu cores running at different speeds. Odroid for example. 5. Added system 'base:' data for -Sx, that modifies Distro: in supported cases. Currently only Mint and MX/AntiX supported because each specific distro must be handled explicitly using empirical file based data tests. I decided against showing this for rolling release, since really everyone knows that Antergos is made from Arch Linux, so showing that does not provide much useful information, whereas showing the Ubuntu version Mint was made from does. Note that several derived distros are changing how they use os-release, so the tools had to be revised to be more dynamic, which is a pain, and makes it even more empirical and less predictable to print what should be trivially easy to gather distro and derived source data. If your distro is not in this list and you want the base data to be present, please supply a --debug 22 dataset so I can check all the files required to make the detection work. If your distro has changed methods, please note which methods were used in the past, and which are used now. 6. Added Armbian distro detection, that's tricky. Added Rasbpian detections. Added improved Antergos, Arco, and maybe Chakra, Arch detections. 7. Big one: Hardware RAID basic support added. Note that each vendor, and unfortunatley, often each product line, has its own raid status and drive reporting tools, which makes adding the actual drive/raid/status report part very time consuming to add. I may only support this if a certain software maker's raid tools are installed because they are much simpler to parse, but for now, it only shows the presence of the raid device itself, not disks, raid status, etc.
2018-06-23 18:32:18 +00:00
.TP
.B \-\-proc\fR
Force debugger to parse \fB/proc\fR directory data when run as root. Normally this is
disabled due to unpredictable data in /proc tree. Only used with \fB\-\-debug 2x\fR.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH SUPPORTED IRC CLIENTS
BitchX, Gaim/Pidgin, ircII, Irssi, Konversation, Kopete, KSirc, KVIrc, Weechat,
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
and Xchat. Plus any others that are capable of displaying either built\-in or external
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
script output.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH RUNNING IN IRC CLIENT
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
To trigger inxi output in your IRC client, pick the appropriate method from the
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
list below:
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B XChat, Irssi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR(and many other IRC clients)
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
.B /exec \-o inxi \fR[\fBoptions\fR]
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If you don't include the \fB\-o\fR, only you will see the output on your local
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
IRC client.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
.B Konversation
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B /cmd inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
To run inxi in Konversation as a native script if your distribution or inxi package
hasn't already done this for you, create this symbolic link:
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
KDE 4:
bug fix in man page, escaped character wrong
2017-06-09 17:14:28 +00:00
.B ln \-s /usr/local/bin/inxi /usr/share/kde4/apps/konversation/scripts/inxi
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
KDE 5:
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.B ln \-s /usr/local/bin/inxi /usr/share/konversation/scripts/inxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If inxi is somewhere else, change the path \fB/usr/local/bin\fR to wherever it
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
is located.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
If you are using KDE/QT 5, then you may also need to add the following to get
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
the Konversation \fR/inxi\fR command to work:
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.B ln \-s /usr/share/konversation /usr/share/apps/
decided have skills to edit
2012-09-15 09:18:08 +00:00
Then you can start inxi directly, like this:
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B /inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
.B WeeChat
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B NEW: /exec \-o inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.B OLD: /shell \-o inxi
This is a small syntax fix that will have essentially no impact on anyone. I've just cleaned up the man code to make it simple enough for roffit man to html conversion. There should be no real visible differences as far as I know.
2016-10-29 22:15:43 +00:00
\fR[\fBoptions\fR]
I think this is the last man page edit, cleaning up line breaks and spacing stuff.
2014-04-03 18:35:14 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Newer (2014 and later) WeeChats work pretty much the same now as other console
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
IRC clients, with \fB/exec \-o inxi \fR[\fBoptions\fR]. Newer WeeChats
have dropped the \fB\-curses\fR part of their program name, i.e.:
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
\fBweechat\fR instead of \fBweechat\-curses\fR.
fixed man pages, made more consistent highlights for I and R types. Updated weechat data to reflect that weechat is now like most other irc console clients with /exec -o functionality.
2014-04-03 18:15:23 +00:00
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
.SH CONFIGURATION FILE
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
inxi will read its configuration/initialization files in the
following order:
\fB/etc/inxi.conf\fR contains the default configurations. These can be overridden
by user configurations found in one of the following locations (inxi will
store its config file using the following precedence:
if \fB$XDG_CONFIG_HOME\fR is not empty, it will go there, else if
\fB$HOME/.conf/inxi.conf\fR exists, it will go there, and as a last default,
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
the legacy location is used), i.e.:
New version, new tarball. This is a significant change, but inxi should handle it smoothly. While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests: 1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively. 2. Since those will often be blank, it then uses a second priority check: $HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here: $HOME/.inxi 3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before In order to make this switch transparent to users, inxi will move the files from .inxi to the respective .config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup. Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in /usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky to guess about user or system intentions, this man location correction will only apply if users have never installed inxi before manually, and have no distro version installed, unlike the config/data directory, which does update neatly with output letting users know the data was moved. Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way, ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise using if present the /usr/local/share/man/man1 location for new manual install users. Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current, then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that inxi will update to the new man location. Also added some more XDG debugger data as well to cover this for future debugger data. This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and issue 101, which I made today just to force the update. Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated, and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fB$XDG_CONFIG_HOME/inxi.conf\fR > \fB$HOME/.conf/inxi.conf\fR >
\fB$HOME/.inxi/inxi.conf\fR
New version, new tarball. This is a significant change, but inxi should handle it smoothly. While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests: 1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively. 2. Since those will often be blank, it then uses a second priority check: $HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here: $HOME/.inxi 3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before In order to make this switch transparent to users, inxi will move the files from .inxi to the respective .config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup. Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in /usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky to guess about user or system intentions, this man location correction will only apply if users have never installed inxi before manually, and have no distro version installed, unlike the config/data directory, which does update neatly with output letting users know the data was moved. Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way, ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise using if present the /usr/local/share/man/man1 location for new manual install users. Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current, then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that inxi will update to the new man location. Also added some more XDG debugger data as well to cover this for future debugger data. This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and issue 101, which I made today just to force the update. Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated, and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
.SH CONFIGURATION OPTIONS
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
See the documentation page for more complete information on how to set
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
these up, and for a complete list of options:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.I https://smxi.org/docs/inxi\-configuration.htm
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
.B Basic Options
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Here's a brief overview of the basic options you are likely to want to use:
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBCOLS_MAX_CONSOLE\fR The max display column width on terminal.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBCOLS_MAX_IRC\fR The max display column width on IRC clients.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBCOLS_MAX_NO_DISPLAY\fR The max display column width in console, out of GUI desktop.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBCPU_SLEEP\fR Decimal value \fB0\fR or more. Default is usually around \fB0.35\fR
seconds. Time that inxi will 'sleep' before getting CPU speed data, so that it
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
reflects actual system state.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBDOWNLOADER\fR Sets default inxi downloader: curl, fetch, ftp, perl, wget.
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
See \fB\-\-recommends\fR output for more information on downloaders and Perl downloaders.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBFILTER_STRING\fR Default \fB<filter>\fR. Any string you prefer to see instead
for filtered values.
\fBINDENT_MIN\fR The point where the line starter wrapping to its own line happens.
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Overrides default. See \fB\-\-indent\-min\fR. If \fB80\fR or less, wrap will never happen.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBLIMIT\fR Overrides default of \fB10\fR IP addresses per IF. This is only of interest
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
to sys admins running servers with many IP addresses.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBPS_COUNT\fR The default number of items showing per \fB\-t\fR type, \fBm\fR or
\fBc\fR. Default is 5.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBSENSORS_CPU_NO\fR In cases of ambiguous temp1/temp2 (inxi can't figure out which
is the CPU), forces sensors to use either value 1 or 2 as CPU temperature. See the
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
above configuration page on smxi.org for full info.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBSEP2_CONSOLE\fR Replaces default key / value separator of '\fB:\fR'.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new man. Bug fixes, feature updates. The main reason to release this earlier than I had hoped was because of the /sys permission change for serial/uuid file data. The earlier we can get this fix out, the better for end users, otherwise they will think they have no serial data when they really do. FIXES: 1. this bug just came to my attention, apparently the (I assume) kernel people decided for us that we don't need to see our serial numbers in /sys unless we are root. This is an unfortunate but sadly predictable event. To work around this recent change (somewhere between 4.14 and 4.15 as far as I can tell), inxi -M and -B now check for root read-only and show <root required> if the file exists but is not user readable. I wish, I really wish, that people could stop changing stuff for no good reason, but that's out of my control, all I can do is adjust inxi to this reality. But shame on whoever decided that was a good idea. This is not technically an inxi bug, but rather a regression, since it's caused by a change in /sys permissions, but users would see it as a bug so I consider this an important fix. Note that the new /sys/class/dmi/id permissions result in various possible things: 1. serial/uuid file is empty but exists and is not readable by user 2. serial/uuid file is not empty and exists and is not readable by user 3. serial/uuid file does not exist 4. serial/uuid file exists, is not empty, and is readable by root Does this change make your life better? It doesn't make mine better, it makes it worse. Consider filing a bug report against whoever allowed this regression is my suggestion. BUGS: 1. A weather bug could result in odd or wrong data showing in weather output, this was due to a mistake in how the weather data was assembled internally. This error could lead to large datastore files, and odd output that is not all correct. 2. More of an enhancement, but due to the way 'v' is used in version numbers, the program_version tool in some cases could have sliced out a 'v' in the wrong place in the version string, and also could have sliced out legitimate v values. This v issue also appeared in bios version, so now the new rule for program_version and certain other version results is to trim off starting v if and only if it is followed by a number. FEATURES: 1. Added in OpenBSD support for showing machine data without having to use dmidecode. This is a combination of systcl -a and dmesg.boot data, not very good quality data sources, but it is available as user, and it does work. Note that BIOS systems are the only ones tested, I don't know what the syntax for UEFI is for the field names and strings. Coming soon is Battery and Sensors data, from the same sources. Sadly as far as I know, OpenBSD is the only BSD that has such nice, usable (well, ok, dmesg.boot data is low quality strings, not really machine safe) data. I have no new datasets from the other BSDs so I don't know if they have decided to copy/emulate this method. 2. By request, and this was listed in issue #134, item no. 1, added in weather switchable metric/imperial output. Also added an option, --weather-unit and configuration item: WEATHER_UNIT with possible values: cf|fc|c|f. The 2nd of two in cf/fc goes in () in the output. Note that windspeed is m/s or km/h as metric, inxi shows m/s as default for metric and (km/h as secondary). Also fixed -w observation date to use local time formatting. That does not work in -W so it shows the default value. 3. Updated man to show new WEATHER_UNIT config option, and new --weather-unit option. Also fixed some other small man glitches that I had missed.
2018-05-11 20:53:26 +00:00
\fBWEATHER_UNIT\fR Values: [\fBc\fR|\fBf\fR|\fBcf\fR|\fBfc\fR]. Same as \fB\-\-weather\-unit\fR.
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.TP
.B Color Options
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
It's best to use the \fB\-c [94\-99]\fR color selector tool to set the following values
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
because it will correctly update the configuration file and remove any invalid
or conflicting items, but if you prefer to create your own configuration files,
here are the options. All take the integer value from the options available in
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fB\-c 94\-99\fR.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBCONSOLE_COLOR_SCHEME\fR The color scheme for console output (not in X/Wayland).
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
\fBGLOBAL_COLOR_SCHEME\fR Overrides all other color schemes.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
\fBIRC_COLOR_SCHEME\fR Desktop X/Wayland IRC CLI color scheme.
\fBIRC_CONS_COLOR_SCHEME\fR Out of X/Wayland, IRC CLI color scheme.
\fBIRC_X_TERM_COLOR_SCHEME\fR In X/Wayland IRC client terminal color scheme.
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
\fBVIRT_TERM_COLOR_SCHEME\fR Color scheme for virtual terminal output (in X/Wayland).
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.SH BUGS
Please report bugs using the following resources.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
You may be asked to run the inxi debugger tool (see \fB\-\-debug 21/22\fR), which will
upload a data dump of system files for use in debugging inxi. These data dumps are
very important since they provide us with all the real system data inxi uses to parse
out its report.
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.B Issue Report
File an issue report:
New version, new tarball: Changes: updated inxi updaters to use github locations. I will do this commit once for googlecode, and once for github, after that, all commits will go only to github. inxi moves to github, despite my dislike of for profit source repos, and git, I decided that I just don't have the time or energy to do it right, so I'm going to use github. The project is already moved, though I have left inxi up for the time being on code.google.com/p/inxi until I move the wiki to http://smxi.org Everything is pretty much the same, the project url is: https://github.com/smxi/inxi The direct download link for the gz is: https://github.com/smxi/inxi/raw/master/inxi.tar.gz git pull is: git pull https://github.com/smxi/inxi master svn checkout url: https://github.com/smxi/inxi And that's about it.
2015-08-20 23:32:57 +00:00
.I https://github.com/smxi/inxi/issues
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.B Developer Forums
Post on inxi developer forums:
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
.I https://techpatterns.com/forums/forum\-32.html
decided have skills to edit
2012-09-15 09:18:08 +00:00
.TP
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
.B IRC irc.oftc.net#smxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
You can also visit
.I irc.oftc.net
\fRchannel:\fI #smxi\fR to post issues.
New version, man page. Features, bugs, fixes! Bugs: 1. Color selector accepted '' as a value, which it would then write to config file, creating errors since it's not an integer value. 2. Corrected distro id error for last fallback case, making the distro ID out of the filename itself, that was missing the assignment to $distro. 3. mmcblk0 was showing up as an unmounted partition, due to failing to filter mmcblk[0-9] in unmounted. Fixes: 1. Added missing compositor kwin_wayland to compositor detections 2. For -M, on laptops, sometimes Type: would duplicate in Chassis: type: which looks silly, so now it checks to make sure the two values are different before using the Chassis: type: data. 3. -D disk vendor, added GALAX, fixed Toshiba, which sometimes occurs other than start of disk id string, so now it checks the whole string. This seems particularly common in nvme devices from Toshiba. This is the only vendor I have found that puts the vendor string later in the device id string. 4. Added protection against unreadable but present /etc/issue. This was caused by a now fixed bug in OpenSuSe, which symbolically linked to create /etc/issue from /var/run/issue, but with 600 permissions, root read only, that is. Note that this bug has since been fixed (now has the correct 644 permissions), but I figured better safe than sorry in case anyone else decides that's a good idea in the future. Now only sends to reader if readable. 5. Related to 4, made reader not exit on failure, now just prints error message and keeps going. 6. Upped maximum distro string length to 60, from 50. AntiX for example was coming in at 48, so I decided to add some safe room now that inxi does dynamic sizing, it is not a big problem having very long distro id strings. Enhancements: 1. Added basic /proc data parser to debugger. Can't get all the data or files because it's simply too big, but grabs the basics. 2. Added vcgencmd for some ARM rasberry pi debugging. 3. ARM: add model if not found in /proc/cpuinfo, or if different. 4. Added Tdie cpu sensor type, this is coming soon in latest kernels, so catching it early. Tdie will replace k10-temp sensor item temp1. 5. Added --admin extra data option, and first set of extra data, -C, which will show CPU Errata (bugs), family, model-id, stepping (as hex (decimal) or hex if less than or equal to 9), microcode (as hex). 6. Battery: added with -x option, if found, attached battery driven devices, like wifi keyboard, mouse. If upower is present, will also try to show battery charge percent for those devices. Note that -B only shows the Device-X items if -x is used, and will not show anything in -F unless there is a system, not device, battery present, or if -Fx is used and there is a Device battery detected. Added upower to recommends. 7. Basic -Dxxx disk rotation speeds added. Requires udevadm. Not all spinning disks show rotation speeds, and it depends on udevadm, so if no rotation found, it shows nothing. 8. Added explicit Arco Linux and Antergos distro ID support. This requires more checks, but in theory, both should now show Arco Linux or Antergos instead of default 'Arch Linux' as before, plus extra data if found, like version.
2018-06-05 00:24:53 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH HOMEPAGE
New version, new tarball: Changes: updated inxi updaters to use github locations. I will do this commit once for googlecode, and once for github, after that, all commits will go only to github. inxi moves to github, despite my dislike of for profit source repos, and git, I decided that I just don't have the time or energy to do it right, so I'm going to use github. The project is already moved, though I have left inxi up for the time being on code.google.com/p/inxi until I move the wiki to http://smxi.org Everything is pretty much the same, the project url is: https://github.com/smxi/inxi The direct download link for the gz is: https://github.com/smxi/inxi/raw/master/inxi.tar.gz git pull is: git pull https://github.com/smxi/inxi master svn checkout url: https://github.com/smxi/inxi And that's about it.
2015-08-20 23:32:57 +00:00
.I https://github.com/smxi/inxi
New version, new tarball, new man page. This is a small update, moved http://smxi.org to https://smxi.org so updated the URLs in man page and inxi. Note that the URLs redirect to https: so this is not a very important update.
2017-09-22 00:12:58 +00:00
.I https://smxi.org/
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.SH AUTHOR AND CONTRIBUTORS TO CODE
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
decided have skills to edit
2012-09-15 09:18:08 +00:00
.B inxi
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
is a fork of \fBlocsmif\fR's very clever \fBinfobash\fR script.
decided have skills to edit
2012-09-15 09:18:08 +00:00
Original infobash author and copyright holder:
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Copyright (C) 2005\-2007 Michiel de Boer aka locsmif
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
inxi version: Copyright (C) 2008\-18 Harald Hope
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
This man page was originally created by Gordon Spencer (aka aus9) and is
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
maintained by Harald Hope (aka h2 or TechAdmin).
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Initial CPU logic, konversation version logic, occasional maintenance fixes,
and the initial xiin.py tool for /sys parsing (obsolete, but still very much
New version, new tarball, new man page. Deprecated xiin uploader, which completes the deprecation of the xiin.py tool, which is going to become obsolete when python 3 fully replaces python 2. Since the odds of perl being around and stable are far higher than the odds of xiin.py even working on python 3, I'm getting ahead of the race. Plus Perl is nicer to work with. And Perl is a lot faster. I mean, a lot. Not slightly. And it also works on much older systems, and does not have that Python version < 2.6 failure due to changing Python syntax even between sub versions. xiin.py never ran on Python 2.5 even when it was relatively recent, which is one reason I'm removing all Python from inxi. Basically xiin.py worked only on Python 2.6 or 2.7, period. Oh, and also handled issue #115 by not making -B show -M data.
2017-08-23 23:14:47 +00:00
appreciated for all the valuable debugger data it helped generate): Scott Rogers
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Further fixes (listed as known):
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
Horst Tritremmel <hjt at sidux.com>
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Completed man edits. Many small bugs fixed. Enhancements: 1. in some cases, will detect partition table type (GTP,MBR) either with or without root. Uses fast method, which is not available on all systems. 2. Added IPMI sensors tools ipmitool and ipmi-sensors to -s for systems that use IPMI. 3. Finished man page edits and corrections. Thanks Pete. 4. Added doubled word filter for main -NGA lines, only for Card items. 5. Gave more granular uptime output: like: uptime: 23d 5h 34m
2018-04-04 06:41:06 +00:00
Steven Barrett (aka: damentz) \- USB audio patch; swap percent used patch.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Jarett.Stevens \- \fBdmidecode \-M\fR patch for older systems with no \fB/sys\fR.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
.SH SPECIAL THANKS TO THE FOLLOWING
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
The nice people at irc.oftc.net channels #linux\-smokers\-club and #smxi,
who all really have to be considered to be co\-developers because of their
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
non\-stop enthusiasm and willingness to provide real\-time testing and debugging
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
of inxi development.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
Siduction forum members, who have helped get some features working by providing
a large number of datasets that have revealed possible variations, particularly for the
RAM \fB\-m\fR option.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
AntiX users and admins, who have helped greatly with testing and debugging,
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
particularly for the 3.0.0 release.
No new version. New tarball, man. Small text changes and cleanup and updates in man page, but no actual meaningful changes. Feel free to ignore this one if you just did 2.3.6.
2016-12-21 03:57:41 +00:00
New version, new man. Bug fixes. BSD fixes. Bugs fixed: 1. CPU: MT/HT was wrong for old xeon, made mt detection more robust and hopefully more reliable, removed all explicit b_xeon based tests. 2. fixed /dev/mapper glitch, that make /dev/mapper links fail to get id'ed. 3. openbsd: fixed memory handler; fixed cpu flags, fixed partitions handling. 4. freebsd: fixed similar partition bugs, these were caused by the darwin patch. 5. man page: fixed top synopis syntax, thanks ESR. 6. partitions fs: fixed possible failures with lsblk fs. lsblk: added debuggers so we can track down this failure in the future. 7. added sshfs filter for disk used output, note, there is a possible syntax for remote fs that isn't handled: AAA:BBB that is, no :/, only the :. This makes explicit detection of still unknown remote fs very difficult since : is a legal nix filename character.
2018-04-19 02:35:49 +00:00
ArcherSeven (Max), Brett Bohnenkamper (aka KittyKatt), and Iotaka, who always
manage to find the weirdest or most extreme hardware and setups that help make
inxi much more robust.
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
For the vastly underrated skill of output error/glitch catching, Pete Haddow. His
patience and focus in going through inxi repeatedly to find errors and inconsistencies
is much appreciated.
New version, new man. Very new man. Man features new section, configuration options, which lists the main config options users would be likely to use. This should help users who will never check the actual documentation web page realize that there are many internal configuration options available. Many edits in man, more to come I suspect. Bug fixes in inxi: 1. removed a few stray debuggers that were creating debugging output 2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro for finding that one) New Option: 1. Added: --indent-min - goes with the user configuration option: INDENT_MIN and allows users to experiment with different indent settings. This is what trips the auto line wrap of line starters. This may be revisited, and this switch will make it easier for users to see for themselves which they prefer, what trip point, etc. This will help determine pre 3.0.0 what the default auto wrap trip point, if any, will be. Added more data to debugger tool, more lsblk, which is going to need a lot more data to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone actually ever uses that environmental variable. Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
All the inxi package maintainers, distro support people, forum moderators,
and in particular, sys admins with their particular issues, which almost always
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
help make inxi better, and any others who contribute ideas, suggestions, and patches.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, new man. Beta / 2.9 testing completed. inxi 3.0 is now ready for prime time. No substantial issues have been found over the past week. All outstanding issues and bugs have been corrected. The man page and help page have been edited fairly heavily to improve usability and readablity. All work and development and support for inxi 2.3.56 is ended. No issues for 2.3.56 will be accepted since there is no way to support that version, it being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5). So the sooner you move your distro package pool to new inxi, the sooner your users can get support for any issues with current inxi. Beta and 2.9 prerelease testing is completed, and has resulted in a much better inxi than I could have hoped for. There are so many new features and enhancements in the new inxi that it's hard to list them all. See previous commits for a more in depth record. 1. New options: --slots (PCI Slots); --usb 2. Exports to json/xml with --output options 3. Every line has been enhanced, with tighter output control, better key / value pairings, more accurate values. 4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns and should basically never wrap (except for very long repo lines, but that's not really fixable). 5. More controls, more user configuration options (see man page). 6. So many small new features that it's hard to list them all. Shows SSH in -I if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning scheme in some cases (more coming). Removes color codes if piped or redirected to file. 7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid ambiguity about whether M or MB or MiB is meant. All internal size math is done using KiB, which further avoids confusion and error. Note that many disk makers like using MB or GB instead of MiB or GiB because it makes their disks seem 'bigger'. 8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors. Anyway, the changelog will show better all the new features etc, I can't remember them all. All current issues and glitches have been fixed, any remaining are simply new issues, just as they would be in old inxi. Note that in the second and third weeks of beta testing a significant number of bugs that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy branch as binxi, to avoid mixing it up with inxi. The development branch is now permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0 2.9 testing and development. This ends the pinxi/inxi development stage. All future development will proceed using the inxi-perl branch, and will be the same in terms of new features as pre inxi 2.9 was, they will be added, enhanced, as seems appropriate. Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian Testing/Sid, and has no frozen release points, so this is simply the beginning of the 3.0 line of Perl inxi. Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging, patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
Without a wide range of diverse Linux kernel\-based Free Desktop systems to test
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
on, we could never have gotten inxi to be as reliable and solid as it's turning
New version, new tarball, new man page. This is the first attempt to correct an issue a forum poster raised, which is the fact that despite the fact that GNU/Linux has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd systems. This has been corrected. Due to the complexity of handling software raid, inxi will now test first for ZFS data, if none is found, it will then test for /proc/mdstat. In a perfect world I'd like to have full dynamic Raid support, but I'm missing all the key ingredients required to add that: 1. systems to test on 2. software raid, I don't use it 3. data collection for non mdraid and zfs software raid, including the values possible to gather from all non software raid. Basically, the only way I'd extend -R raid option is if I get direct ssh access to a machine that uses the alternate software raid type, otherwise it would take forever to figure out the options. Since the number of people who might be actually running zfs and mdraid and using inxi probably numbers in the 10 globally, I figured this solution was a fine way to handle adding zfs without messing up mdraid, which is more common on linux. It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't have /proc/mdraid in the first place. Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass curl, fetch, wget, and all of them, respectively. Plus making the lines less wide. That should make those people who actually use 80 column wide vi as an editor happy, lol.
2017-11-29 01:23:41 +00:00
out to be.
decided have skills to edit
2012-09-15 09:18:08 +00:00
New version, man page. Finished up main man edits. Set new defaults for some options, like --sleep and -t. Edits to layout and language, removed some legacy options and language from man and inxi. Added partition table detections, rough initial stage. Only works on systems with udev present currently, will be expanded as we find fast tools. Since the systemd method is literally up to 25x slower than the udev method, it's not being considered except maybe as a last, last resort, and probably will never be used.
2018-04-06 22:52:08 +00:00
And of course, a big thanks to locsmif, who figured out a lot of the core methods,
New inxi, new man, new tarball. It's here! Perl inxi, first official release. So many changes, really too many to list. But here's a few: 1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current. 2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit either taste or viewport. 3. Long options for all options now, plus of course the short options everyone is used to. 4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time); and many more. Check --help or man page for details. 5. Vastly improved --recommends, now does per distro package recommends, and shows only Linux data to Linux systems, and BSD data to BSD systems. 6. Hugely improved debugger as well. 7. Far more accurate output, most output is now in key/value pairs, because: 8. inxi now exports to json and xml! See --output/--output-file for info. 9. Enhancedd repo output, added deb822 type, solus 10. Radically enhanced network data, now shows all IP / IF devices connected to each nic, not just one, both IP v4 and v6. 11. USB audio and network device actual drivers 12. better handling of compiler data. 13. Basic ARM machine data now, if present to inxi 14. Graphics: per card driver info alongside the original xorg drivers. 15. Better integration of partitions, RAID, unmounted partitions, and HDD data. 16. Better sensors handling of free video driver sensor data, well, not better, it's now there, along with fan speeds for gpus. 17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID is improved. 18. Much improved disk/partition/memory sizing, inxi now always works internally with KB units, and changes them on output to the appropriate units. 19. Fully redone man page for all the new options and the long options. And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
logic, and tricks originally used in inxi Gawk/Bash.
Reference in a new issue Copy permalink