New version, new man. Small new enhancements.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
|
|
|
.TH INXI 1 "2018\-04\-17" inxi "inxi manual"
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH NAME
|
2018-04-06 22:52:08 +00:00
|
|
|
inxi \- Command line system information script for console and IRC
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH SYNOPSIS
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fBinxi\fR \- Display a short system summary.
|
2016-10-29 22:25:55 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBinxi \fR[\fB\-AbBCdDfFGhiIlmMnNopPrRsSuUVwzZ\fR]
|
2016-10-29 22:25:55 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
\fBinxi \fR[\fB\-c NUMBER\fR] [\fB\-t c|m|cm|mc [NUMBER]\fR] \fR[\fB\-v NUMBER\fR]
|
|
|
|
|
[\fB\-W LOCATION\fR] [\fB\-y WIDTH\fR]
|
2016-10-29 22:25:55 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBinxi \fR[\fB\-\-recommends\fR] \fR[\fB\-\-slots\fR] \fR[\fB\-\-usb\fR]
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
\fBinxi \fB\-x\fR|\fB\-xx\fR|\fB\-xxx\fR \fB\-OPTION(s) \fR
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
All options have long form variants \- see below for these and more advanced options.
|
2018-03-26 22:03:15 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH DESCRIPTION
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBinxi\fR is a command line system information script built for console
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
and IRC. It is also used a debugging tool for forum technical support
|
2018-04-06 22:52:08 +00:00
|
|
|
to quickly ascertain users' system configurations and hardware. inxi shows
|
|
|
|
|
system hardware, CPU, drivers, Xorg, Desktop, Kernel, gcc version(s), Processes,
|
|
|
|
|
RAM usage, and a wide variety of other useful information.
|
|
|
|
|
|
|
|
|
|
\fBinxi\fR output varies depending on whether it is being used on CLI or IRC,
|
|
|
|
|
with some default filters and color options applied only for IRC use.
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Script colors can be turned off if desired with \fB\-c 0\fR, or changed
|
|
|
|
|
using the \fB\-c\fR color options listed in the STANDARD OPTIONS section below.
|
2018-03-26 22:03:15 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH PRIVACY AND SECURITY
|
2018-04-06 22:52:08 +00:00
|
|
|
In order to maintain basic privacy and security, inxi used on IRC automatically
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
filters out your network card MAC address, WAN and LAN IP, your \fB/home\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
username directory in partitions, and a few other items.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Because inxi is often used on forums for support, you can also trigger this
|
|
|
|
|
filtering with the \fB\-z\fR option (\fB\-Fz\fR, for example). To override
|
|
|
|
|
the IRC filter, you can use the \fB\-Z\fR option. This can be useful in debugging
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
network connection issues online in a private chat, for example.
|
2018-03-26 22:03:15 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH USING OPTIONS
|
2018-04-06 22:52:08 +00:00
|
|
|
Options can be combined if they do not conflict. You can either group the letters
|
2012-09-15 09:18:08 +00:00
|
|
|
together or separate them.
|
|
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Letters with numbers can have no gap or a gap at your discretion, except when
|
2018-03-31 03:12:25 +00:00
|
|
|
using \fB \-t\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
For example:
|
|
|
|
|
.B inxi
|
2017-06-09 17:14:28 +00:00
|
|
|
\fB\-AG\fR or \fBinxi \-A \-G\fR or \fBinxi \-c10\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
Note that all the short form options have long form equivalents, which are
|
2018-04-06 22:52:08 +00:00
|
|
|
listed below. However, usually the short form is used in examples in order to
|
2018-03-31 03:12:25 +00:00
|
|
|
keep things simple.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.SH STANDARD OPTIONS
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-A\fR,\fB \-\-audio\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show Audio/sound card(s) information, including card driver.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-b\fR,\fB \-\-basic\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show basic output, short form. Same as: \fBinxi \-v 2\fR
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-B\fR,\fB \-\-battery\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show Battery data, charge, condition, plus extra information (if battery present).
|
|
|
|
|
Uses \fB/sys\fR or, for BSDs without systctl battery data, \fBdmidecode\fR.
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBdmidecode\fR does not have very much information, and none about current battery
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
state/charge/voltage. Supports multiple batteries when using \fB/sys\fR data.
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
Note that for \fBcharge\fR, the output shows the current charge, as well as its
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
value as a percentage of the available capacity, which can be less than the original design
|
2018-04-06 22:52:08 +00:00
|
|
|
capacity. In the following example, the actual current available capacity of the battery
|
2018-03-31 03:12:25 +00:00
|
|
|
is \fB22.2 Wh\fR.
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
\fBcharge: 20.1 Wh 95.4%\fR
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
The \fBcondition\fR item shows the remaining available capacity / original design
|
|
|
|
|
capacity, and then this figure as a percentage of original capacity available in the battery.
|
2018-03-31 03:12:25 +00:00
|
|
|
|
|
|
|
|
\fBcondition: 22.2/36.4 Wh (61%)\fR
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-c\fR,\fB \-\-color\fR \fR[\fB0\fR\-\fB42\fR]
|
|
|
|
|
Set color scheme. If no scheme number is supplied, 0 is assumed.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-c \fR[\fB94\fR\-\fB99\fR]
|
2016-10-29 22:15:43 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
These color selectors run a color selector option prior to inxi starting which lets
|
2012-09-15 09:18:08 +00:00
|
|
|
you set the config file value for the selection.
|
|
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
Color selectors for each type display (NOTE: IRC and global only show safe color set):
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 94\fR
|
|
|
|
|
\- Console, out of X.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 95\fR
|
|
|
|
|
\- Terminal, running in X \- like xTerm.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 96\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- GUI IRC, running in X \- like XChat, Quassel,
|
2012-09-15 09:18:08 +00:00
|
|
|
Konversation etc.
|
|
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 97\fR
|
|
|
|
|
\- Console IRC running in X \- like irssi in xTerm.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 98\fR
|
|
|
|
|
\- Console IRC not in X.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-c 99\fR
|
|
|
|
|
\- Global \- Overrides/removes all settings.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
Setting a specific color type removes the global color selection.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-C\fR,\fB \-\-cpu\fR
|
|
|
|
|
Show full CPU output, including per CPU clock speed and CPU max speed (if available).
|
2018-04-15 17:07:26 +00:00
|
|
|
If max speed data present, shows \fB(max)\fR in short output formats (\fBinxi\fR,
|
|
|
|
|
\fBinxi \-b\fR) if actual CPU speed matches max CPU speed. If max CPU speed does
|
2018-04-06 22:52:08 +00:00
|
|
|
not match actual CPU speed, shows both actual and max speed information.
|
|
|
|
|
See \fB\-x\fR for more options.
|
2018-03-31 03:12:25 +00:00
|
|
|
|
|
|
|
|
For certain CPUs (some ARM, and AMD Zen family) shows CPU die count.
|
2017-12-07 19:22:59 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
The details for each CPU include a technical description e.g. \fBtype: MT MCP\fR
|
2017-12-07 19:22:59 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
* \fBMT\fR \- Multi/Hyper Threaded CPU, more than 1 thread per core (previously \fBHT\fR).
|
2017-12-07 19:22:59 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
* \fBMCM\fR \- Multi Chip Model (more than 1 die per CPU).
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
* \fBMCP\fR \- Multi Core Processor (more than 1 core per CPU).
|
2017-12-07 19:22:59 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
* \fBSMP\fR \- Symmetric Multi Processing (more than 1 physical CPU).
|
2017-12-07 19:22:59 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
* \fBUP\fR \- Uni (single core) Processor.
|
2017-12-07 19:22:59 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-d\fR,\fB \-\-disk\-full\fR,\fB\-\-optical\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show optical drive data as well as \fB\-D\fR hard drive data. With \fB\-x\fR, adds a
|
2018-04-06 22:52:08 +00:00
|
|
|
feature line to the output. Also shows floppy disks if present. Note that there is
|
|
|
|
|
no current way to get any information about the floppy device that I am aware of,
|
2018-03-31 03:12:25 +00:00
|
|
|
so it will simply show the floppy ID without any extra data. \fB\-xx\fR adds a
|
|
|
|
|
few more features.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-D\fR,\fB \-\-disk\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show Hard Disk info. Shows total disk space, used percentage, and details for
|
|
|
|
|
each disk. The disk used percentage includes space used by swap partition(s),
|
|
|
|
|
since those are not usable for data storage. Note that
|
|
|
|
|
with RAID disks, the percentage will be wrong since the total is computed from the
|
|
|
|
|
disk sizes, but used is computed from mounted partition used percentages. This
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
small defect may get corrected in the future. Also, unmounted partitions are not
|
2014-04-27 22:57:24 +00:00
|
|
|
counted in disk use percentages since inxi has no access to that data.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-f\fR,\fB \-\-flags\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show all CPU flags used, not just the short list. Not shown with \fB\-F\fR in order
|
|
|
|
|
to avoid spamming. ARM CPUs: show \fBfeatures\fR items.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-F\fR,\fB \-\-full\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show Full output for inxi. Includes all Upper Case line letters except \fB\-W\fR,
|
|
|
|
|
plus \fB\-s\fR and \fB\-n\fR. Does not show extra verbose options such as
|
|
|
|
|
\fB\-d \-f \-i \-l \-m \-o \-p \-r \-t \-u \-x\fR unless you use those arguments in
|
2018-03-31 03:12:25 +00:00
|
|
|
the command, e.g.: \fBinxi \-Frmxx\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-G\fR,\fB \-\-graphics\fR
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
Show Graphic card(s) information, including details of card and card driver,
|
|
|
|
|
display protocol (if available), display server (vendor and version number), e.g.:
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
\fBDisplay: x11 server: Xorg 1.15.1\fR
|
2017-06-25 01:28:24 +00:00
|
|
|
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
If protocol is not detected, shows:
|
|
|
|
|
|
|
|
|
|
\fBDisplay: server: Xorg 1.15.1\fR
|
|
|
|
|
|
|
|
|
|
Also shows screen resolution(s), OpenGL renderer, OpenGL core profile version/OpenGL
|
2018-04-06 22:52:08 +00:00
|
|
|
version.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
If detected (currently only available if on a desktop), it will attempt to show the
|
|
|
|
|
server type, i.e., X11, Wayland, Mir. When Xorg is present, its version information
|
2018-03-31 03:12:25 +00:00
|
|
|
will show after the server type in parentheses. Compositor information will show if
|
|
|
|
|
detected using \fB\-xx\fR option.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-h\fR,\fB \-\-help\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
The help menu. Features dynamic sizing to fit into terminal window. Set script
|
|
|
|
|
global \fBCOLS_MAX_CONSOLE\fR if you want a different default value, or
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
use \fB\-y <width>\fR to temporarily override the defaults or actual window width.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-i\fR,\fB \-\-ip\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show WAN IP address and local interfaces (latter requires \fBifconfig\fR or
|
|
|
|
|
\fBip\fR network tool), as well as network output from \fB\-n\fR.
|
|
|
|
|
Not shown with \fB\-F\fR for user security reasons. You shouldn't paste your
|
2018-03-31 03:12:25 +00:00
|
|
|
local/WAN IP. Shows both IPv4 and IPv6 link IP addresses.
|
New version, new tarball, new man page. This corrects several oversights of the 2.3.10 IPv6 update.
Now there is an -x option for -i that will show the additioanl IPv6 address data for scope global,
temporary, and site. Also a fallback for unhandled scope: unknown. If the tool 'ip' is used, it will
filter out the deprecated temp site/global addresses, ifconfig tool does not appear to offer this
option.
Also changed is that now ipv6 address always shows, it's not an -x option. Probably about time to
start rolling out ip v6 data to users now that ip v6 is starting, slowly, to be used more.
Another small change, the link address for ipv6 is changed from ip-v6: to ip-v6-link so that it's
more clear which IP v6 address it is.
The last commit had a significant logic error in it that did not distinguish between the link address,
which is what should have only shown, and the remaining possible addresses.
I've tried to get a basic bsd support, but it's difficult to know the variants of ifconfig output syntax
2017-05-31 22:33:16 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-I\fR,\fB \-\-info\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show Information: processes, uptime, memory, IRC client (or shell type if run in
|
|
|
|
|
shell, not IRC), inxi version. See \fB\-x\fR and \fB\-xx\fR for extra information
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
(init type/version, runlevel).
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-l\fR,\fB \-\-label\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show partition labels. Default: main partitions \fB\-P\fR. For full \fB\-p\fR output,
|
2018-03-31 03:12:25 +00:00
|
|
|
use: \fB\-pl\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-m\fR,\fB \-\-memory\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Memory (RAM) data. Does not display with \fB\-b\fR or \fB\-F\fR unless you use \fB\-m\fR
|
|
|
|
|
explicitly. Ordered by system board physical system memory array(s) (\fBArray\-[number]\fR),
|
|
|
|
|
and individual memory devices (\fBDevice\-[number]\fR). Physical memory
|
|
|
|
|
array data shows array capacity, number of devices supported, and Error Correction
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
information. Devices shows locator data (highly variable in syntax), size, speed,
|
2018-04-06 22:52:08 +00:00
|
|
|
type (eg: \fBtype: DDR3\fR).
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Note that \fB\-m\fR uses \fBdmidecode\fR, which must be run as root (or start
|
|
|
|
|
\fBinxi\fR with \fBsudo\fR), unless you figure out how to set up sudo to permit
|
|
|
|
|
dmidecode to read \fB/dev/mem\fR as user. Note that speed will not show if \fBNo Module
|
|
|
|
|
Installed\fR is found in \fBsize\fR. This will also turn off Bus Width data output if it is null.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
If memory information was found, and if the \fB\-I\fR line or the \fB\-tm\fR item have
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
not been triggered, will also print the RAM used/total.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Because \fBdmidecode\fR data is extremely unreliable, inxi will try to make best guesses.
|
|
|
|
|
If you see \fB(check)\fR after the capacity number, you should check it with the
|
|
|
|
|
specifications. \fB(est)\fR is slightly more reliable, but you should still check
|
|
|
|
|
the real specifications before buying RAM. Unfortunately there is nothing \fBinxi\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
can do to get truly reliable data about the system RAM; maybe one day the kernel devs
|
2018-04-06 22:52:08 +00:00
|
|
|
will put this data into \fB/sys\fR, and make it real data, taken from the actual system,
|
|
|
|
|
not dmi data. For most people, the data will be right, but a significant percentage of
|
2018-03-31 03:12:25 +00:00
|
|
|
users will have either a wrong max module size, if present, or max capacity.
|
New version, new tarball, new man page. Finally, after all these years, initial memory/ram
support. This feature requires dmidecode, and usually that needs to be run as root.
Significantly improved dmidecode error handling and output, and have as 2.1.90 testing/initial
release basic ram data.
In subsequent releases, extra info for -x and -xx and -xxx will be added as well to the output.
For those who want to jump on board early for ram data, update your repos, for those who want to
wait for the full featured version, with -x type data, wait for 2.2.0
And that's that.
2014-08-12 05:26:35 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-M\fR,\fB \-\-machine\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show machine data. Device, Motherboard, BIOS, and if present, System Builder (Like Lenovo).
|
2018-04-06 22:52:08 +00:00
|
|
|
Older systems/kernels without the required \fB/sys\fR data can use \fBdmidecode\fR instead, run
|
|
|
|
|
as root. If using \fBdmidecode\fR, may also show BIOS/UEFI revision as well as version.
|
|
|
|
|
\fB\-\-dmidecode\fR forces use of \fBdmidecode\fR data instead of \fB/sys\fR.
|
|
|
|
|
Will also attempt to show if the system was booted by BIOS, UEFI, or UEFI [Legacy], the
|
2018-03-31 03:12:25 +00:00
|
|
|
latter being legacy BIOS boot mode in a system board using UEFI.
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Device information requires either \fB/sys\fR or \fBdmidecode\fR. Note that 'other\-vm?'
|
|
|
|
|
is a type that means it's usually a VM, but inxi failed to detect which type, or
|
|
|
|
|
positively confirm which VM it is. Primary VM identification is via systemd\-detect\-virt
|
|
|
|
|
but fallback tests that should also support some BSDs are used. Less commonly
|
|
|
|
|
used or harder to detect VMs may not be correctly detected. If you get an incorrect output,
|
2018-03-31 03:12:25 +00:00
|
|
|
post an issue and we'll get it fixed if possible.
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Due to unreliable vendor data, device type will show: desktop, laptop, notebook, server,
|
|
|
|
|
blade, plus some obscure stuff that inxi is unlikely to ever run on.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.B \-n\fR,\fB \-\-network\-advanced\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show Advanced Network card information in addition to that produced by \fB\-N\fR.
|
2018-03-31 03:12:25 +00:00
|
|
|
Shows interface, speed, MAC ID, state, etc.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-N\fR,\fB \-\-network\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show Network card(s) information, including card driver. With \fB\-x\fR, shows PCI BusID,
|
|
|
|
|
Port number.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-o\fR,\fB \-\-unmounted\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
Show unmounted partition information (includes UUID and LABEL if available).
|
2018-03-31 03:12:25 +00:00
|
|
|
Shows file system type if you have \fBlsblk\fR installed (Linux only). For BSD/GNU Linux:
|
|
|
|
|
shows file system type if \fBfile\fR is installed, and if you are root or
|
2018-04-06 22:52:08 +00:00
|
|
|
if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.B <username> ALL = NOPASSWD: /usr/bin/file (sample)
|
2014-04-03 18:35:14 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Does not show components (partitions that create the md\-raid array) of md\-raid arrays.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.B \-p\fR,\fB \-\-partitions\-full\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show full Partition information (\fB\-P\fR plus all other detected mounted partitions).
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-P\fR,\fB \-\-partitions\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show basic Partition information.
|
2018-04-06 22:52:08 +00:00
|
|
|
Shows, if detected: \fB/ /boot /home /opt /tmp /usr /var /var/tmp /var/log\fR.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
Use \fB\-p\fR to see all mounted partitions.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-r\fR,\fB \-\-repos\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
Show distro repository data. Currently supported repo types:
|
|
|
|
|
|
2017-06-29 19:56:23 +00:00
|
|
|
\fBAPK\fR (Alpine Linux + derived versions)
|
|
|
|
|
|
2014-04-04 02:47:08 +00:00
|
|
|
\fBAPT\fR (Debian, Ubuntu + derived versions)
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
\fBEOPKG\fR (Solus)
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBPACMAN\fR (Arch Linux, KaOS + derived versions)
|
|
|
|
|
|
|
|
|
|
\fBPACMAN\-G2\fR (Frugalware + derived versions)
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2014-04-04 02:47:08 +00:00
|
|
|
\fBPISI\fR (Pardus + derived versions)
|
2013-10-05 01:40:00 +00:00
|
|
|
|
2015-02-16 02:22:32 +00:00
|
|
|
\fBPORTAGE\fR (Gentoo, Sabayon + derived versions)
|
2015-02-16 02:17:58 +00:00
|
|
|
|
|
|
|
|
\fBPORTS\fR (OpenBSD, FreeBSD, NetBSD + derived OS types)
|
|
|
|
|
|
2015-02-16 02:33:41 +00:00
|
|
|
\fBSLACKPKG\fR (Slackware + derived versions)
|
2015-02-16 02:17:58 +00:00
|
|
|
|
2014-04-04 02:47:08 +00:00
|
|
|
\fBURPMQ\fR (Mandriva, Mageia + derived versions)
|
|
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
\fBYUM/ZYPP\fR (Fedora, Red Hat, Suse + derived versions)
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
More will be added as distro data is collected. If yours is missing please
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
show us how to get this information and we'll try to add it.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-R\fR,\fB \-\-raid\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Show RAID data. Shows RAID devices, states, levels and components, and
|
2018-04-06 22:52:08 +00:00
|
|
|
extra data with \fB\-x\fR / \fB\-xx\fR.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
md\-raid: If device is resyncing, also shows resync progress line.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Note: Only md\-raid and ZFS are currently supported. Other software RAID types could
|
|
|
|
|
be added, but only if users supply all data required, and if the software
|
|
|
|
|
RAID actually can be made to give the required output.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-recommends\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Checks inxi application dependencies and recommends, as well as directories,
|
2018-03-31 03:12:25 +00:00
|
|
|
then shows what package(s) you need to install to add support for each feature.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-s\fR,\fB \-\-sensors\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show output from sensors if sensors installed/configured: Motherboard/CPU/GPU
|
|
|
|
|
temperatures; detected fan speeds. GPU temperature when available. Nvidia shows
|
|
|
|
|
screen number for multiple screens. IPMI sensors are also used (root required)
|
2018-04-04 06:41:06 +00:00
|
|
|
if present.
|
|
|
|
|
.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-slots\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show PCI slots with type, speed, and status information.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.TP
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
.B \-S\fR,\fB \-\-system\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show System information: host name, kernel, desktop environment (if in X),
|
|
|
|
|
distro. With \fB\-xx\fR show dm \- or startx \- (only shows if present and
|
|
|
|
|
running if out of X), and if in X, with \fB\-xxx\fR show more desktop info,
|
2018-03-31 03:12:25 +00:00
|
|
|
e.g. shell/panel.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-t\fR,\fB \-\-processes\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fR[\fBc|m|cm|mc NUMBER\fR] Show processes. If no arguments, defaults to \fBcm\fR.
|
|
|
|
|
If followed by a number, shows that number of processes for each type
|
2018-03-31 03:12:25 +00:00
|
|
|
(default: \fB5\fR; if in IRC, max: \fB5\fR)
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-03-31 03:12:25 +00:00
|
|
|
Make sure that there is no space between letters and numbers (e.g. write as \fB\-t cm10\fR).
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-t c\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
\- CPU only. With \fB\-x\fR, also shows memory for that process on same line.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-t m\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- memory only. With \fB\-x\fR, also shows CPU for that process on same line.
|
|
|
|
|
If the \-I line is not triggered, will also show the system RAM used/total
|
2018-03-31 03:12:25 +00:00
|
|
|
information.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2017-06-09 17:14:28 +00:00
|
|
|
.B \-t cm\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- CPU+memory. With \fB\-x\fR, shows also CPU or memory for that process on
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
same line.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-usb\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
Show USB data for attached Hubs and Devices.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-u\fR,\fB \-\-uuid\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Show partition UUIDs. Default: main partitions \fB\-P\fR. For full \fB\-p\fR
|
2018-03-31 03:12:25 +00:00
|
|
|
output, use: \fB\-pu\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-U\fR,\fB \-\-update\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Note \- Maintainer may have disabled this function.
|
2014-04-03 18:28:18 +00:00
|
|
|
|
2017-06-09 17:14:28 +00:00
|
|
|
If inxi \fB\-h\fR has no listing for \fB\-U\fR then it's disabled.
|
2014-04-03 18:28:18 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Auto\-update script. Note: if you installed as root, you must be root to
|
|
|
|
|
update, otherwise user is fine. Also installs / updates this man page to:
|
|
|
|
|
\fB/usr/local/share/man/man1\fR (if \fB/usr/local/share/man/\fR exists
|
|
|
|
|
AND there is no inxi man page in \fB/usr/share/man/man1\fR, otherwise it
|
|
|
|
|
goes to \fB/usr/share/man/man1\fR). This requires that you be root to write
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
to that directory. See \fB\-\-man\fR or \fB\-\-no\-man\fR to force or disable
|
|
|
|
|
man install.
|
2017-01-05 00:23:16 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-V\fR,\fB \-\-version\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
inxi version information. Prints information then exits.
|
|
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-v\fR,\fB \-\-verbosity\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Script verbosity levels. If no verbosity level number is given, 0 is assumed.
|
|
|
|
|
Should not be used with \fB\-b\fR or \fB\-F\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
Supported levels: \fB0\-8\fR Examples :\fB inxi \-v 4 \fR or \fB inxi \-v4\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 0
|
2017-06-09 17:14:28 +00:00
|
|
|
\- Short output, same as: \fBinxi\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 1
|
|
|
|
|
\- Basic verbose, \fB\-S\fR + basic CPU (cores, type, clock speed, and min/max
|
2018-03-31 03:12:25 +00:00
|
|
|
speeds, if available) + \fB\-G\fR + basic Disk + \fB\-I\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 2
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
\- Adds networking card (\fB\-N\fR), Machine (\fB\-M\fR) data, Battery (\fB\-B\fR)
|
2018-03-31 03:12:25 +00:00
|
|
|
(if available). Same as: \fBinxi \-b\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 3
|
|
|
|
|
\- Adds advanced CPU (\fB\-C\fR) and network (\fB\-n\fR) data; triggers \fB\-x\fR
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
advanced data option.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 4
|
2018-03-31 03:12:25 +00:00
|
|
|
\- Adds partition size/used data (\fB\-P\fR) for (if present):
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fB/ /home /var/ /boot\fR. Shows full disk data (\fB\-D\fR)
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 5
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds audio card (\fB\-A\fR), memory/RAM (\fB\-m\fR), sensors (\fB\-s\fR),
|
2018-04-06 22:52:08 +00:00
|
|
|
partition label (\fB\-l\fR), UUID (\fB\-u\fR), and short form of
|
2012-09-15 09:18:08 +00:00
|
|
|
optical drives.
|
|
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 6
|
|
|
|
|
\- Adds full mounted partition data (\fB\-p\fR), unmounted partition data (\fB\-o\fR),
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
optical drive data (\fB\-d\fR), USB (\fB\-\-usb\fR); triggers \fB\-xx\fR extra data option.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 7
|
2017-06-09 17:14:28 +00:00
|
|
|
\- Adds network IP data (\fB\-i\fR); triggers \fB\-xxx\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B \-v 8
|
2018-03-31 03:12:25 +00:00
|
|
|
\- All system data available. Adds Repos (\fB\-r\fR), PCI slots (\fB\-\-slots\fR), processes
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
(\fB\-tcm\fR). Useful for testing output and to see what data you can get from your system.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-w\fR,\fB \-\-weather\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Adds weather line. Note, this depends on an unreliable API so it may not always
|
|
|
|
|
be working in the future. To get weather for an alternate location, use
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fB\-W\fR. See also \fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR options.
|
2018-03-31 03:12:25 +00:00
|
|
|
Please note that your distribution's maintainer may chose to disable this feature.
|
2013-05-26 03:19:38 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-W\fR,\fB \-\-weather\-location <location_string>\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Get weather/time for an alternate location. Accepts postal/zip code,
|
|
|
|
|
city,state pair, or latitude,longitude. Note: city/country/state names must not
|
|
|
|
|
contain spaces. Replace spaces with '\fB+\fR' sign. Don't place spaces around any commas.
|
|
|
|
|
Use only ASCII letters in city/state/country names, sorry.
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Examples: \fB\-W 95623\fR OR \fB\-W Boston,MA\fR OR \fB\-W45.5234,\-122.6762\fR
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
OR \fB\-W new+york,ny\fR OR \fB\-W bodo,norway\fR.
|
2014-04-03 17:46:31 +00:00
|
|
|
.TP
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.B \-y\fR,\fB \-\-width <integer>\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
This is an absolute width override which sets the output line width max.
|
|
|
|
|
Overrides \fBCOLS_MAX_IRC\fR / \fBCOLS_MAX_CONSOLE\fR globals, or the
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
actual widths of the terminal. \fB80\fR is the minimum width supported.
|
|
|
|
|
\fB\-1\fR removes width limits. Example: \fBinxi \-Fxx\ \-y 130\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-z\fR,\fB \-\-filter\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Adds security filters for IP addresses, serial numbers, MAC,
|
|
|
|
|
location (\fB\-w\fR), and user home directory name. On by default for IRC clients.
|
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers
weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather
and system time there. -x adds time zone, which is useful for servers, particurly web servers.
-x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line,
if data is available, heat index, wind chill, and dew point.
-xxx also adds a line for location (blocked by irc/-z) / weather observation time.
-z filter applies as usual to location data, removes it in irc by default. -Z overrides override.
The api this uses is probably going to be dropped at some point, so this is just going to work
while it works, then it will need to be updated at some point, so don't get very attached to it.
Also adds option to, with -w: -! location=<location string>
This lets users send an alternate location using either <city,state> or <postal code>
or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order
must be as listed.
If There is a developer flag if distro maintainers do not want this enabled, simply set:
B_ALLOW_WEATHER='false'
before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
|
|
|
.TP
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.B \-Z\fR,\fB \-\-filter\-override\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Absolute override for output filters. Useful for debugging networking
|
2018-03-31 03:12:25 +00:00
|
|
|
issues in IRC for example.
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH EXTRA DATA OPTIONS
|
2018-04-06 22:52:08 +00:00
|
|
|
These options can be triggered by one or more \fB\-x\fR.
|
|
|
|
|
Alternatively, the \fB\-v\fR options trigger them in the following
|
|
|
|
|
way: \fB\-v 3\fR adds \fB\-x\fR;
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
\fB\-v 6\fR adds \fB\-xx\fR; \fB\-v 7\fR adds \fB\-xxx\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
These extra data triggers can be useful for getting more in\-depth
|
|
|
|
|
data on various options. They can be added to any long form option list,
|
2018-03-31 03:12:25 +00:00
|
|
|
e.g.: \fB\-bxx\fR or \fB\-Sxxx\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
There are 3 extra data levels:
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
\fB\-x\fR, \fB\-xx\fR, \fB\-xxx\fR
|
|
|
|
|
|
|
|
|
|
OR
|
|
|
|
|
|
|
|
|
|
\fB\-\-extra 1\fR, \fB\-\-extra 2\fR, \fB\-\-extra 3\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
The following details show which lines / items display extra information for each
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
extra data level.
|
2012-10-19 19:43:26 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-A\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Adds version/port(s)/driver version (if available) for each Audio
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
device.
|
2012-10-19 19:43:26 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-A\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds PCI Bus ID/USB ID number of each Audio device.
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-B\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds vendor/model, battery status (if battery present).
|
2018-04-06 22:52:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-C\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds bogomips on CPU (if available); CPU Flags (short list).
|
2018-04-06 22:52:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-C\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds CPU microarchitecture + revision (e.g. Sandy Bridge, K8, ARMv8, P6,
|
2018-04-06 22:52:08 +00:00
|
|
|
etc.). Only shows data if detected. Newer microarchitectures will have
|
2018-04-04 06:41:06 +00:00
|
|
|
to be added as they appear, and require the CPU family ID and model ID.
|
2017-07-29 01:42:17 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
Examples: \fBarch: Sandy Bridge rev: 2\fR, \fBarch: K8 rev.F+ rev: 2\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-d\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds more items to \fBFeatures\fR line of optical drive;
|
|
|
|
|
dds rev version to optical drive.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-D\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds HDD temperature with disk data if you have hddtemp installed, if you are root
|
2018-04-06 22:52:08 +00:00
|
|
|
or if you have added to \fB/etc/sudoers\fR (sudo v. 1.7 or newer):
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.B <username> ALL = NOPASSWD: /usr/sbin/hddtemp (sample)
|
2017-06-29 19:56:23 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-G\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds direct rendering status.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-G\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds (for single GPU, nvidia driver) screen number that GPU is running on.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-G\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds PCI Bus ID/USB ID number of each Graphics card.
|
2012-10-19 19:43:26 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-i\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds IP v6 additional scope data, like Global, Site, Temporary for
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
each interface.
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Note that there is no way I am aware of to filter out the deprecated
|
|
|
|
|
IP v6 scope site/global temporary addresses from the output of
|
2018-04-04 06:41:06 +00:00
|
|
|
\fBifconfig\fR. The \fBip\fR tool shows that clearly.
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBip\-v6\-temporary\fR \- (\fBip\fR tool only), scope global temporary.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
Scope global temporary deprecated is not shown
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBip\-v6\-global\fR \- scope global (\fBifconfig\fR will show this for
|
|
|
|
|
all types, global, global temporary, and global temporary deprecated,
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
\fBip\fR shows it only for global)
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBip\-v6\-link\fR \- scope link (\fBip\fR/\fBifconfig\fR) \- default
|
|
|
|
|
for \fB\-i\fR.
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBip\-v6\-site\fR \- scope site (\fBip\fR/\fBifconfig\fR). This has been
|
|
|
|
|
deprecated in IPv6, but still exists. \fBifconfig\fR may show multiple site
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
values, as with global temporary, and global temporary deprecated.
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2017-06-09 17:14:28 +00:00
|
|
|
\fBip\-v6\-unknown\fR \- unknown scope
|
2017-05-31 22:41:17 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds current init system (and init rc in some cases, like OpenRC).
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
With \fB\-xx\fR, shows init/rc version number, if available.
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds default system gcc. With \fB\-xx\fR, also show other installed gcc
|
2018-04-06 22:52:08 +00:00
|
|
|
versions.
|
2012-12-05 21:38:07 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds current runlevel (not available with all init systems).
|
2014-01-13 23:01:03 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- If in shell (i.e. not in IRC client), adds shell version number, if available.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- If present, adds maximum memory module/device size in the Array line.
|
2018-04-06 22:52:08 +00:00
|
|
|
Only some systems will have this data available. Shows estimate if it can
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
generate one.
|
2014-08-13 21:05:21 +00:00
|
|
|
.TP
|
2018-04-04 06:41:06 +00:00
|
|
|
.B \-x \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds device type in the Device line.
|
2018-04-04 06:41:06 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-N\fR
|
2017-06-09 17:14:28 +00:00
|
|
|
\- Adds version/port(s)/driver version (if available) for each Network card;
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-N\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds PCI Bus ID/USB ID number of each Network card.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-R\fR
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
\- md\-raid: Adds second RAID Info line with extra data: blocks, chunk size,
|
2018-04-06 22:52:08 +00:00
|
|
|
bitmap (if present). Resync line, shows blocks synced/total blocks.
|
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers
weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather
and system time there. -x adds time zone, which is useful for servers, particurly web servers.
-x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line,
if data is available, heat index, wind chill, and dew point.
-xxx also adds a line for location (blocked by irc/-z) / weather observation time.
-z filter applies as usual to location data, removes it in irc by default. -Z overrides override.
The api this uses is probably going to be dropped at some point, so this is just going to work
while it works, then it will need to be updated at some point, so don't get very attached to it.
Also adds option to, with -w: -! location=<location string>
This lets users send an alternate location using either <city,state> or <postal code>
or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order
must be as listed.
If There is a developer flag if distro maintainers do not want this enabled, simply set:
B_ALLOW_WEATHER='false'
before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
|
|
|
.TP
|
New version, new man. Small new enhancements.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
|
|
|
.B \-xx \-s\fR
|
|
|
|
|
\- Adds basic voltages: 12v, 5v, 3.3v, vbat (\fBipmi\fR only).
|
|
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-S\fR
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
\- Adds desktop toolkit (\fBtk\fR), if available (GNOME/Xfce/KDE only).
|
|
|
|
|
.TP
|
|
|
|
|
.B \-x \-S\fR
|
|
|
|
|
\- Kernel gcc version.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-x \-t\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Adds memory use output to CPU (\fB\-xt c\fR), and CPU use to memory
|
|
|
|
|
(\fB\-xt m\fR).
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-x \-\-usb\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- For \fBDevices\fR, adds USB version/speed.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-x \-w\fR,\fB \-W\fR
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
\- Adds humidity and barometric pressure.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-x \-w\fR,\fB \-W\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds wind speed and direction.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-A\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds vendor:product ID for each Audio device.
|
2012-10-19 19:28:31 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-B\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds serial number, voltage (if available). Note that \fBvolts\fR shows the
|
New version, new man. Small new enhancements.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
|
|
|
data (if available) as the voltage now / minimum design voltage.
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-D\fR
|
2017-06-09 17:14:28 +00:00
|
|
|
\- Adds disk serial number.
|
2012-10-19 19:28:31 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-G\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Adds vendor:product ID of each Graphics card.
|
2017-06-09 19:39:43 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-G\fR
|
2018-04-12 21:26:18 +00:00
|
|
|
\- Adds compositor, if found (experimental).
|
2017-06-09 19:39:43 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-G\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- For free drivers, adds OpenGL compatibility version number if available.
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
For nonfree drivers, the core version and compatibility versions are usually
|
|
|
|
|
the same. Example:
|
2017-06-09 19:39:43 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
\fBv: 3.3 Mesa 11.2.0 compat\-v: 3.0\fR
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds init type version number (and rc if present).
|
2014-03-13 00:18:26 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-I\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds other detected installed gcc versions (if present).
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-I\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds system default runlevel, if detected. Supports Systemd/Upstart/SysVinit
|
2018-04-06 22:52:08 +00:00
|
|
|
type defaults.
|
2014-01-13 23:01:03 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-I\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds parent program (or tty) that started shell, if not IRC client.
|
2013-01-29 00:03:06 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds memory device Manufacturer.
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-xx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds memory device Part Number (\fBpart\-no:\fR). Useful for ordering new or
|
2018-04-06 22:52:08 +00:00
|
|
|
replacement memory sticks etc. Part numbers are unique, particularly
|
|
|
|
|
if you use the word \fBmemory\fR in the search as well. With \fB\-xxx\fR,
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
also shows serial number.
|
2014-08-13 03:19:55 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds single/double bank memory, if data is found. Note, this may not be 100% right
|
2018-04-06 22:52:08 +00:00
|
|
|
all of the time since it depends on the order that data is found in \fBdmidecode\fR
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
output for \fBtype 6\fR and \fBtype 17\fR.
|
2014-08-16 23:24:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-M\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Adds chassis information, if data is available. Also shows BIOS
|
2018-04-04 06:41:06 +00:00
|
|
|
ROM size if using \fBdmidecode\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-N\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds vendor:product ID for each Network card.
|
2012-10-19 19:28:31 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-R\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- md\-raid: Adds superblock (if present) and algorithm. If resync,
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
shows progress bar.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New version, new man. Small new enhancements.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
|
|
|
.B \-xx \-s\fR
|
|
|
|
|
\- Adds DIMM/SOC voltages, if present (\fBipmi\fR only).
|
|
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-S\fR
|
New version, new man. Small new enhancements.
1. Added to -s for ipmi, with -x: voltage 12v,5v,3.3v,vbat; for -xx, dimm/soc p1/p2
voltages
2. enhanced wm: feature, needed more filters and protection against redundant data
3. basic apple osx fixes to keep it from crashing, but I'm not spending any more
time on apple junk unless someone pays me for my time, I can't stand the product or
company, it's the total antitheses of freedom or free software, or even openness.
4. openbsd/bsd fixes: openbsd was failing to get cpu flags due to a small oversight
5. -C now shows bits: for the true bits of cpu, not the kernel bits. This is not
a reliable measurement but should be right about 95+ percent of the time, and
basically all of the time for GNU/Linux on Intel/AMD, most of the time for ARM.
When it doesn't know it does not guess, and shows N/A.
6. bsd fix for usb, was running numeric action on string value
7. fixed stderr tool for program_version, now it's hard-coded in program_values
which removes an unneded regex search for every program version test.
8. Mate detection, switched to using mate-sesssion instead of mate-about, the
latter is not getting updated and has the wrong version number on it.
2018-04-17 20:28:16 +00:00
|
|
|
\- Adds, if run in X, display manager (\fBdm\fR) type, if present.q
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
If none, shows N/A. Supports most known display managers, including gdm, gdm3,
|
|
|
|
|
idm, kdm, lightdm, lxdm, mdm, nodm, sddm, slim, tint, wdm, and xdm.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-\-slots\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds slot length.
|
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers
weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather
and system time there. -x adds time zone, which is useful for servers, particurly web servers.
-x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line,
if data is available, heat index, wind chill, and dew point.
-xxx also adds a line for location (blocked by irc/-z) / weather observation time.
-z filter applies as usual to location data, removes it in irc by default. -Z overrides override.
The api this uses is probably going to be dropped at some point, so this is just going to work
while it works, then it will need to be updated at some point, so don't get very attached to it.
Also adds option to, with -w: -! location=<location string>
This lets users send an alternate location using either <city,state> or <postal code>
or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order
must be as listed.
If There is a developer flag if distro maintainers do not want this enabled, simply set:
B_ALLOW_WEATHER='false'
before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-\-usb\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds vendor:chip id.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xx \-w\fR,\fB \-W\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds wind chill, heat index, and dew point if any of these are available.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-xxx \-B\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Adds battery chemistry (e.g. \fBLi\-ion\fR), cycles (NOTE: there appears to
|
|
|
|
|
be a problem with the Linux kernel obtaining the cycle count, so this almost
|
|
|
|
|
always shows \fB0\fR. There's nothing that can be done about this glitch, the
|
|
|
|
|
data is simply not available as of 2018\-04\-03), location (only available from
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fBdmidecode\fR derived output).
|
New Feature, new version, new man page, new tarball. Laptop users should be happy,
-B option now shows, if available, battery data. Quite good data for systems
with /sys battery data, only rudimentary for systems using dmidecode (BSDs).
dmidecode has no current voltage/charge/current supported capacity.
Main row shows charge and condition. Condition shows you have much capacity the
battery currently has vs its design capacity. Charge shows the Wh/percent of
current capacity of battery (NOT the rated design capacity).
-x adds battery vendor/model info, and battery status (like, charging, discharging,
full).
-xx adds battery serial number and voltage information. Note that voltage information
is presented as Current Voltage / Designed minimum voltage.
-xxx adds battery chemistry (like Li-ion), cycles (note: there's a bug somewhere in
that makes the cycle count always be 0, I don't know if that's in the batteries,
the linux kernel, but it's not inxi, just FYI, the data is simply 0 always in all
my datasets so far.
For dmidecode output, the location of the batter is also shown in -xxx
2016-04-19 00:03:14 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-D\fR
|
|
|
|
|
\- Adds disk firmware revision number, if available (nvme and possibly other types).
|
|
|
|
|
.TP
|
2018-04-04 06:41:06 +00:00
|
|
|
.B \-xxx \-D\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds disk partition scheme (in some but not all cases), e.g. scheme: \fBGPT\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
.TP
|
2018-03-29 03:57:19 +00:00
|
|
|
.B \-xxx \-I\fR
|
|
|
|
|
\- For \fBShell:\fR adds \fB(su|sudo|login)\fR to shell name if present.
|
|
|
|
|
.TP
|
|
|
|
|
.B \-xxx \-I\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- For \fBrunning in:\fR adds \fB(SSH)\fR to parent, if present. SSH detection
|
2018-03-29 03:57:19 +00:00
|
|
|
uses the \fBwho am i\fR test.
|
|
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds memory bus width: primary bus width, and if present, total width. e.g.
|
|
|
|
|
\fBbus width: 64 bit (total: 72 bits)\fR. Note that total / data widths are mixed up
|
2018-04-06 22:52:08 +00:00
|
|
|
sometimes in dmidecode output, so inxi will take the larger value as the total if
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
present. If no total width data is found, then inxi will not show that item.
|
2014-08-13 03:19:55 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds device Type Detail, e.g. \fBdetail: DDR3 (Synchronous)\fR.
|
2014-08-13 03:19:55 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- If present, adds memory module voltage. Only some systems will have this
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
data available.
|
2014-08-13 21:05:21 +00:00
|
|
|
.TP
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.B \-xxx \-m\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- Adds device serial number.
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-R\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- md\-raid: Adds system mdraid support types (kernel support, read ahead, RAID events)
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- zfs\-raid: Adds portion allocated (used) by RAID array/device.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-xxx \-S\fR
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
\- Adds, if run in X, shell/panel type (\fBinfo\fR), if present.
|
2018-04-06 22:52:08 +00:00
|
|
|
If none, shows nothing. Supports some current desktop extras like gnome\-panel,
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
lxde\-panel, and others. Added mainly for Mint support.
|
New version, new tarball, new man page. Unless disabled by distribution maintainers, offers
weather -w option. With -x, -xx-, -xxx, shows more information. Basic line is just weather
and system time there. -x adds time zone, which is useful for servers, particurly web servers.
-x also adds wind speed. -xx adds humidity and barometric pressure. -xxx adds a possible new line,
if data is available, heat index, wind chill, and dew point.
-xxx also adds a line for location (blocked by irc/-z) / weather observation time.
-z filter applies as usual to location data, removes it in irc by default. -Z overrides override.
The api this uses is probably going to be dropped at some point, so this is just going to work
while it works, then it will need to be updated at some point, so don't get very attached to it.
Also adds option to, with -w: -! location=<location string>
This lets users send an alternate location using either <city,state> or <postal code>
or <latitude,longitude> (commas for city,state and latitude,longitude are not optional, and the order
must be as listed.
If There is a developer flag if distro maintainers do not want this enabled, simply set:
B_ALLOW_WEATHER='false'
before packaging and the weather feature will be disabled.
2013-05-18 02:04:29 +00:00
|
|
|
.TP
|
New version, new man. Fine tunings.
New features:
1. for a very few systems that have wmctrl installed, will shows -xxx wm if present
Enhancements:
1. made xorg display server and protocols show more consistently with other layout:
Display: x11 server: X.org 1.9.12 drivers: loaded: ...
if no display protocol found:
Display: server: X.org 1.9.12 drivers: loaded: ...
This brings the -G in line with the other lines, of not putting different data types
inside of parentheses as much as possible. -I still has two of these, but so far it's
not clear how to otherwise show SSH or su/sudo/login in their respective spaces.
Debugger data collector also has something I should have added ages ago, gz filename
now includes the basic 2 digit inxi version number, like 3.0 at end, so I can readily
determine the debugger inxi version, and thus avoid having to root through lots of
versions to find new stuff.
These are all largely cosmetic improvements, or debugger adjustments, except for -Sxxx
now offering wm: if present.
Also changed Desktop: name... (toolkit data) to: Desktop: name... tk: toolkit data
to be more consistent, while not adding great length to the output.
These two changes should also help export to json/xml since that puts unique key/values
back into key value pairs, not merging two together.
2018-04-12 20:23:46 +00:00
|
|
|
.B \-xxx \-S\fR
|
|
|
|
|
\- Adds, if run in X, window manager type (\fBwm\fR), if available.
|
|
|
|
|
Not all window managers are supported. Some desktops support using more than one
|
|
|
|
|
window manager, so this can be useful to see what windom manager is actually running.
|
|
|
|
|
If none found, shows nothing.
|
|
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-xxx \-w\fR,\fB \-W\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Adds location (city state country), altitude, weather observation time.
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
|
New version, updated man page, new tarball.
Fixed partition bug that could falsely identify a remote filesystem like nfs as /dev fs
Added two options:
-! 31 - Turns off Host section of System line. This is useful if you want to post output
from server without posting its name.
-! 32 - Turns on Host section if it has been disabled by user configuration file
B_SHOW_HOST='false'
Added missing CPU data message, fixed missing cpu cache/bogomips output, turned off
bogomips if null for bsd systems because bogomips is a linux kernel feature.
Added N/A for no memory report, this would mainly hit bsd systems where user has no
permissions to use sysctl or has no read rights for /var/run/dmesg.boot.
Many fixes for partitions, now for bsd, if available, uses gpart list to get uuid/label
Added support for raid file system syntax in bsd, now excludes main raid device name,
and adds a flag to raiddevice/partitionname type so output can identify it as a raid
slice/partition.
In man page, added -! 31 / -! 32 sections, and some other small edits.
Added bsd raid line error message, added bsd sensors line error message.
Many other small bug fixes that should make linux more robust in terms of missing
data, and better/cleaner output for bsd.
2013-02-18 20:33:05 +00:00
|
|
|
.SH ADVANCED OPTIONS
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-alt 40\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Bypass \fBPerl\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
|
2018-04-04 06:41:06 +00:00
|
|
|
Curl, Wget, Fetch, (OpenBSD only) ftp.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-alt 41\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Bypass \fBCurl\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
|
2018-04-04 06:41:06 +00:00
|
|
|
Curl, Wget, Fetch, (OpenBSD only) ftp.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-alt 42\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Bypass \fBFetch\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
|
2018-04-04 06:41:06 +00:00
|
|
|
Curl, Wget, Fetch, (OpenBSD only) ftp.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-alt 43\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Bypass \fBWget\fR as a downloader option. Priority is: Perl (HTTP::Tiny),
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
Curl, Wget, Fetch, OpenBSD only: ftp
|
|
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-alt 44\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Bypass \fBCurl\fR, \fBFetch\fR, and \fBWget\fR as downloader options. This
|
|
|
|
|
basically forces the downloader selection to use \fBPerl 5.x\fR \fBHTTP::Tiny\fR,
|
|
|
|
|
which is generally slower than \fBCurl\fR or \fBWget\fR but it may help bypass
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
issues with downloading.
|
2017-06-09 02:29:55 +00:00
|
|
|
|
|
|
|
|
.TP
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
.B \-\-display [:<integer>]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Will try to get display data out of X (does not usually work as root user).
|
|
|
|
|
Default gets display info from display \fB:0\fR. If you use the format
|
|
|
|
|
\fB\-\-display :1\fR then it would get it from display \fB1\fR instead,
|
2018-04-04 06:41:06 +00:00
|
|
|
or any display you specify.
|
2017-06-10 21:42:49 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Note that in some cases, \fB\-\-display\fR will cause inxi to hang endlessly when
|
|
|
|
|
running the option in console with Intel graphics. The situation regarding
|
|
|
|
|
other free drivers such as nouveau/ATI is currently unknown. It may be that
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
this is a bug with the Intel graphics driver \- more information is required.
|
2017-06-10 21:42:49 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
You can test this easily by running the following command out of X/display server:
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fBglxinfo \-display :0\fR
|
2017-06-10 21:42:49 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
If it hangs, \fB\-\-display\fR will not work.
|
2017-06-09 02:29:55 +00:00
|
|
|
|
2018-03-24 09:18:41 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-\-dmidecode\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Force use of \fBdmidecode\fR. This will override \fB/sys\fR data in some lines,
|
2018-04-04 06:41:06 +00:00
|
|
|
e.g. \fB\-M\fR or \fB\-B\fR.
|
2018-03-24 09:18:41 +00:00
|
|
|
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-downloader [curl|fetch|perl|wget]\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
Force inxi to use Curl, Fetch, Perl, or Wget for downloads.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-03-24 09:18:41 +00:00
|
|
|
.TP
|
2018-03-26 22:03:15 +00:00
|
|
|
.B \-\-host\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Turns on hostname in System line. Overrides inxi config file value (if set):
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBSHOW_HOST='false'\fR
|
|
|
|
|
|
|
|
|
|
.TP
|
|
|
|
|
.B \-\-indent\-min [integer]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Overrides default indent minimum value. This is the value that makes inxi change from
|
|
|
|
|
wrapped line starters [like \fBInfo\fR] to non wrapped. If less than \fB80\fR,
|
2018-04-04 06:41:06 +00:00
|
|
|
no wrapping will occur. Overrides internal default value and user configuration value:
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBINDENT_MIN=85\fR
|
2018-03-24 09:18:41 +00:00
|
|
|
|
2017-11-29 01:28:28 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-limit [\-1 \- x]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Raise or lower max output limit of IP addresses for \fB\-i\fR. \fB\-1\fR removes limit.
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-\-man\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Updates / installs man page with \fB\-U\fR if \fBpinxi\fR or using \fB\-U 3\fR dev branch.
|
2018-03-26 01:42:49 +00:00
|
|
|
(Only active if \fB\-U\fR is is not disabled by maintainers).
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
|
2018-03-24 09:18:41 +00:00
|
|
|
.TP
|
2018-03-26 22:03:15 +00:00
|
|
|
.B \-\-no\-host\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Turns off hostname in System line. Useful, in combination with \fB\-z\fR,
|
|
|
|
|
for anonymizing inxi output for posting on forums or IRC. Same as
|
2018-04-04 06:41:06 +00:00
|
|
|
configuration value:
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBSHOW_HOST='false'\fR
|
2018-03-24 09:18:41 +00:00
|
|
|
|
2018-03-26 01:42:49 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-\-no\-man\fR
|
2018-03-26 01:48:30 +00:00
|
|
|
Disables man page install with \fB\-U\fR for master and active development branches.
|
2018-03-26 01:42:49 +00:00
|
|
|
(Only active if \fB\-U\fR is is not disabled by maintainers).
|
|
|
|
|
|
2018-03-24 09:18:41 +00:00
|
|
|
.TP
|
|
|
|
|
.B \-\-no\-ssl\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Skip SSL certificate checks for all downloader actions (\fB\-U\fR, \fB\-w\fR,
|
|
|
|
|
\fB\-W\fR, \fB\-i\fR). Use if your system does not have current SSL certificate
|
|
|
|
|
lists, or if you have problems making a connection for any reason. Works with
|
|
|
|
|
\fBWget\fR, \fBCurl\fR, and \fBFetch\fR only.
|
2018-03-24 09:18:41 +00:00
|
|
|
|
2017-11-29 01:28:28 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-output [json|screen|xml]\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
Change data output type. Requires \-\-output\-file if not fBscreen\fR.
|
2018-04-06 22:52:08 +00:00
|
|
|
|
New version, new man. Big update, corrects many small typos, adds some good new
features.
So now inxi and pinxi will grab the inxi.1 or pinxi.1 man file and install it on
systems that do not have -U blocked. The -U block of course remains the same.
New features:
1. now does not require root or 'file' to get unmounted fs type. Also, for many
mounted partitions, rather than showing the meaningless fuseblock it will usually
get the filesystem right.
2. -U now works with optional --man option to download man page for pinxi
and -U 3 dev server updates. This gets around the fact I had to remove the gz files
from master to get the size small enough to make maintainers happy. Non branch
inxi master works as before, updates both from github or from dev server, depending
on your selection.
3. Thanks very much to the people who have been contributing in a positve way,
helping to make inxi better. The untold number of small and large new features,
small glitches, etc, that have been fixed this week are simply too many too list.
Many to most were inxi bugs or weaknesses, now corrected.
4. binxi branch has now been made fully operational, though I do not plan on doing
any work beyond the mothballing of that venerable program (gawk->bash inxi), it's
fully operational, it updates, it gets its man page, but all as binxi, so you can,
as with pinxi, run all of them separately. This officially terminates my support
for Gawk/Bash inxi, which can be found as binxi in the inxi-legacy branch.
5. pinxi has been promoted to permanent development branch, where bug fixes, new
features, etc, will be tested, along with man page updates etc. This will help
reduce the number of commits to master branch.
6. Audio / Network usb cards now show the true driver(s). There are often more
than one for audio, that's a nice enancement.
7. inxi outputs to json / xml, which will probably interest some developers
eventually, well it already did, that was going to wait, but someone wanted it.
8. Apt repo handler now supports DEB822 format, which is not an easy format to
parse.
==========================================================
MAINTAINERS:
Note the following: despite my strong dislike for tags, every commit that touches
either inxi or inxi.1 man page will be tagged if I think they would be something
relevant to distro packagers. While github insists on calling my tags releases,
I want to be crystal clear: inxi has one and only one 'release', the current master
branch version. The tagged commits that github calls releases are NOT releases,
they are just tagged commits. The version I release tomorrow will be the current
master, and all previous versions will be obsolete and will not be supported.
The .gz files have been removed from the master branch history, thus shrinking it
a lot. I have removed for this reason the master-plain branch, which mirrored
master and provided a gz free branch, but apparently this was simply ignored so
there's no reason to keep it going. If you insist on grabbing all the branches and
find more data in there, then please correct your practices, you are only getting
the data from the master branch.
inxi is rolling release software and has no releases, so the tags are supposed
to create some illusion that a tag actually means something. Since it doesn't,
I decided to take the path of least resistance and just add an auto tagging tool
to my commit scripts and use it when it seems appropriate, like on this commit.
All development work now will happen via the pinxi branch, so that makes the process
a lot cleaner, since I can now basically beta test all new commmits to master.
pinxi and binxi are both standalone versions of inxi, they have their own config
and data directories, config files, man pages, etc.
-----------------------------------------------------
New Perl inxi is already way ahead of Gawk/Bash inxi, more features, more accurate,
and most bugs being fixed now are because a lot of people are contributing eyes and
testing, and are finding stuff that was wrong, or simply missing, on old inxi as
well as on Perl inxi. Fixes to Perl inxi (>2.9) will not be rolled into to binxi
since the entire reason I spent over 4 months on this project was to never have to
touch Gawk/Bash inxi again.
Most imporant, however, is that the simple fact was, Gawk/Bash inxi has been
nearly impossible to work on despite my following rigorous practices in coding,
and I simply won't work with that type of stuff anymore. Perl 5.x is a true delight
in comparison, and makes adding new features, enhancing others, far easier, or
even possible, where it wasn't before.
On a technical level, I have tested Perl inxi heavily, and it will run on all
Perl 5.x versions back to 5.008, which is the cutoff point. This was not that
hard to do, which is why I picked Perl 5.x as the language. This means that
you can drop, just as with binxi, Perl inxi onto a 10 year old system, or
older, and it will run fine, albeit a touch slowly, but must faster than binxi.
-----------------------------------------------------
So far users are really liking the new one, it's usually faster in most cases,
the output is cleaner, there's more data, more options, and basically it's
gotten the thumbs up from all the testers, and there have been a LOT, who have
helped. I want to give a special thanks to the following distros for their
exceptional support and testing:
0. the people who hang out on irc.oftc.net #smxi. Very patient, will test things
with astounding patience, so thanks to them. Archerseven, iotaka and KittyKatt
have been been incredibly helpful when it comes to testing and debugging, and
finding corner cases that I would never have found.
1. AntiX: they were the first to beta test pinxi, and found massive numbers of
bugs, and stuck with the testing for a long time. They made testing possible for
the next wave of testers, my hats off to them, I've always liked them.
2. Manjaro also was very helpful, and found more issues and enhancements.
3. Ubuntu forums users found more, and helped enhance many faetures
4. Mint users have been very helpful, and were the impetus for some nifty
new features, ilke switching all color codes off when output is piped or sent
to file. They have reminded me of how valuable people's views can be who may not
share the same tech world view as you, but are still very talented and observant
individuals.
5. Slackware users provided some very thoughtful feedback, which was no surprise
but welcome nonetheless, thanks.
6. Same with Debian forums, again, some very useful and constructive ideas and
observations, and some very arcane and odd hardware that exposed even more corner
case bugs.
And several other distros were also helpful, each in their own way. Solus for
example now has their package manager added in repos.
2018-03-23 05:59:34 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-output\-file [full path to output file|print]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
The given directory path must exist. The directory path given must exist,
|
|
|
|
|
The \fBprint\fR options prints to stdout.
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Required for non\-screen \fB\-\-output\fR formats (json|xml).
|
2018-04-06 22:52:08 +00:00
|
|
|
|
2017-11-29 01:28:28 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-sleep [0\-x.x]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
Usually in decimals. Change CPU sleep time for \fB\-C\fR (current: \fB\0.35\fR).
|
|
|
|
|
Sleep is used to let the system catch up and show a more accurate CPU use. Example:
|
|
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
\fBinxi \-Cxxx \-\-sleep 0.15\fR
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
Overrides default internal value and user configuration value:
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBCPU_SLEEP=0.25\fR
|
|
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH DEBUGGING OPTIONS
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug [1\-3]\fR
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\- On screen debugger output (currently not used).
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug 10\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
\- Basic logging. Check \fB$XDG_DATA_HOME/inxi/inxi.log\fR or
|
2018-04-04 06:41:06 +00:00
|
|
|
\fB$HOME/.local/share/inxi/inxi.log\fR or \fB$HOME/.inxi/inxi.log\fR.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug 11\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
\- Full file/system info logging.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-04 06:41:06 +00:00
|
|
|
.B \-\-debug [20\-22]\fR
|
|
|
|
|
Debugger output generator.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug 20\fR
|
2018-04-04 06:41:06 +00:00
|
|
|
Creates a tar.gz file of system data and collects the inxi output
|
|
|
|
|
in a file.
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
* tree traversal data file read from \fB/sys\fR, and other system
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
data.
|
2014-04-03 18:35:14 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
* xorg conf and log data, xrandr, xprop, xdpyinfo, glxinfo etc.
|
|
|
|
|
|
|
|
|
|
* data from dev, disks, partitions, etc.
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug 21\fR
|
|
|
|
|
Automatically uploads debugger data tar.gz file to \fIftp.techpatterns.com\fR,
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
then removes the debug data directory, but leaves the debug tar.gz file.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
See \fB\-\-ftp\fR for uploading to alternate locations.
|
|
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-debug 22\fR
|
|
|
|
|
Automatically uploads debugger data tar.gz file to \fIftp.techpatterns.com\fR, then
|
|
|
|
|
removes the debug data directory and the tar.gz file.
|
|
|
|
|
See \fB\-\-ftp\fR for uploading to alternate locations.
|
|
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.B \-\-ftp [ftp.yoursite.com/incoming]\fR
|
2018-04-06 22:52:08 +00:00
|
|
|
For alternate ftp upload locations: Example:
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
|
|
|
|
\fBinxi \-\-ftp \fIftp.yourserver.com/incoming\fB \-\-debug 21\fR
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.SH SUPPORTED IRC CLIENTS
|
|
|
|
|
BitchX, Gaim/Pidgin, ircII, Irssi, Konversation, Kopete, KSirc, KVIrc, Weechat,
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
and Xchat. Plus any others that are capable of displaying either built\-in or external
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
script output.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH RUNNING IN IRC CLIENT
|
2018-04-06 22:52:08 +00:00
|
|
|
To trigger inxi output in your IRC client, pick the appropriate method from the
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
list below:
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
.B XChat, Irssi
|
2016-10-29 22:15:43 +00:00
|
|
|
\fR(and many other IRC clients)
|
2018-04-04 06:41:06 +00:00
|
|
|
.B /exec \-o inxi \fR[\fBoptions\fR]
|
2018-04-06 22:52:08 +00:00
|
|
|
If you don't include the \fB\-o\fR, only you will see the output on your local
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
IRC client.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
|
|
|
|
.B Konversation
|
2018-04-06 22:52:08 +00:00
|
|
|
.B /cmd inxi
|
2016-10-29 22:15:43 +00:00
|
|
|
\fR[\fBoptions\fR]
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
To run inxi in Konversation as a native script if your distribution or inxi package
|
|
|
|
|
hasn't already done this for you, create this symbolic link:
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
KDE 4:
|
2017-06-09 17:14:28 +00:00
|
|
|
.B ln \-s /usr/local/bin/inxi /usr/share/kde4/apps/konversation/scripts/inxi
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
KDE 5:
|
2017-09-22 00:12:58 +00:00
|
|
|
.B ln \-s /usr/local/bin/inxi /usr/share/konversation/scripts/inxi
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
If inxi is somewhere else, change the path \fB/usr/local/bin\fR to wherever it
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
is located.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
If you are using KDE/QT 5, then you may also need to add the following to get
|
2018-04-04 06:41:06 +00:00
|
|
|
the Konversation \fR/inxi\fR command to work:
|
2017-09-22 00:12:58 +00:00
|
|
|
|
|
|
|
|
.B ln \-s /usr/share/konversation /usr/share/apps/
|
|
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
Then you can start inxi directly, like this:
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.B /inxi
|
2016-10-29 22:15:43 +00:00
|
|
|
\fR[\fBoptions\fR]
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
|
|
|
|
.B WeeChat
|
2018-04-06 22:52:08 +00:00
|
|
|
.B NEW: /exec \-o inxi
|
2016-10-29 22:15:43 +00:00
|
|
|
\fR[\fBoptions\fR]
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.B OLD: /shell \-o inxi
|
2016-10-29 22:15:43 +00:00
|
|
|
\fR[\fBoptions\fR]
|
2014-04-03 18:35:14 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Newer (2014 and later) WeeChats work pretty much the same now as other console
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
IRC clients, with \fB/exec \-o inxi \fR[\fBoptions\fR]. Newer WeeChats
|
|
|
|
|
have dropped the \fB\-curses\fR part of their program name, i.e.:
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
\fBweechat\fR instead of \fBweechat\-curses\fR.
|
2014-04-03 18:15:23 +00:00
|
|
|
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
.SH CONFIGURATION FILE
|
2018-04-06 22:52:08 +00:00
|
|
|
inxi will read its configuration/initialization files in the
|
|
|
|
|
following order:
|
|
|
|
|
|
|
|
|
|
\fB/etc/inxi.conf\fR contains the default configurations. These can be overridden
|
|
|
|
|
by user configurations found in one of the following locations (inxi will
|
|
|
|
|
store its config file using the following precedence:
|
|
|
|
|
if \fB$XDG_CONFIG_HOME\fR is not empty, it will go there, else if
|
|
|
|
|
\fB$HOME/.conf/inxi.conf\fR exists, it will go there, and as a last default,
|
2018-04-04 06:41:06 +00:00
|
|
|
the legacy location is used), i.e.:
|
New version, new tarball. This is a significant change, but inxi should handle it smoothly.
While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests:
1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively.
2. Since those will often be blank, it then uses a second priority check:
$HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here:
$HOME/.inxi
3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before
In order to make this switch transparent to users, inxi will move the files from .inxi to the respective
.config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup.
Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in
/usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help
users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky
to guess about user or system intentions, this man location correction will only apply if users have never
installed inxi before manually, and have no distro version installed, unlike the config/data directory,
which does update neatly with output letting users know the data was moved.
Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up
instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way,
ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise
using if present the /usr/local/share/man/man1 location for new manual install users.
Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current,
then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that
inxi will update to the new man location.
Also added some more XDG debugger data as well to cover this for future debugger data.
This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and
issue 101, which I made today just to force the update.
Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG
and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated,
and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner
at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fB$XDG_CONFIG_HOME/inxi.conf\fR > \fB$HOME/.conf/inxi.conf\fR >
|
|
|
|
|
\fB$HOME/.inxi/inxi.conf\fR
|
New version, new tarball. This is a significant change, but inxi should handle it smoothly.
While default configs remain in /etc/inxi.conf, the user overrides now use the following order of tests:
1. XDG_CONFIG_HOME / XDG_DATA_HOME for the config and log/debugger data respectively.
2. Since those will often be blank, it then uses a second priority check:
$HOME/.config $HOME/.local/share to place the inxi data directory, which was previously here:
$HOME/.inxi
3. If neither of these cases are present, inxi will default to its legacy user data: $HOME/.inxi as before
In order to make this switch transparent to users, inxi will move the files from .inxi to the respective
.config/ .local/share/inxi directories, and remove the .inxi directory after to cleanup.
Also, since I was fixing some path stuff, I also did issue 77, manual inxi install not putting man pages in
/usr/local/share/man/man1, which had caused an issue with Arch linux inxi installer. Note that I can't help
users who had a manual inxi install with their man page in /usr/share/man/man1 already, because it's too risky
to guess about user or system intentions, this man location correction will only apply if users have never
installed inxi before manually, and have no distro version installed, unlike the config/data directory,
which does update neatly with output letting users know the data was moved.
Note that if users have man --path set up incorrectly, it's possible that the legacy man page would show up
instead, which isn't good, but there was no perfect fix for the man issue so I just picked the easiest way,
ignoring all man pages installed into /usr/share/man/man1 and treating them as final location, otherwise
using if present the /usr/local/share/man/man1 location for new manual install users.
Also, for users with existing man locations and an inxi manually installed, you have to update to inxi current,
then move your man file to /usr/local/share/man/man1, then update man with: mandb command (as root), after that
inxi will update to the new man location.
Also added some more XDG debugger data as well to cover this for future debugger data.
This closes previous issue #77 (man page for manual inxi install does not go into /usr/local/share/man/man1) and
issue 101, which I made today just to force the update.
Just as a side note, I find this absurd attempt at 'simplifying by making more complex and convoluted' re the XDG
and .config and standard nix . file to be sort of tragic, because really, they've just made it all way more complicated,
and since all 3 methods can be present, all the stuff has to be tested for anyway, so this doesn't make matters cleaner
at all, it's just pointless busywork that makes some people happy since now there's even more rules to follow, sigh.
2016-12-20 02:57:56 +00:00
|
|
|
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
.SH CONFIGURATION OPTIONS
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
See the documentation page for more complete information on how to set
|
2018-04-04 06:41:06 +00:00
|
|
|
these up, and for a complete list of options:
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2017-09-22 00:12:58 +00:00
|
|
|
.I https://smxi.org/docs/inxi\-configuration.htm
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Here's a brief overview of the basic options you are likely to want to use:
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBCOLS_MAX_CONSOLE\fR The max display column width on terminal.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBCOLS_MAX_IRC\fR The max display column width on IRC clients.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBCOLS_MAX_NO_DISPLAY\fR The max display column width in console, out of GUI desktop.
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBCPU_SLEEP\fR Decimal value \fB0\fR or more. Default is usually around \fB0.35\fR
|
|
|
|
|
seconds. Time that inxi will 'sleep' before getting CPU speed data, so that it
|
2018-04-04 06:41:06 +00:00
|
|
|
reflects actual system state.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBDOWNLOADER\fR Sets default inxi downloader: curl, fetch, ftp, perl, wget.
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
See \fB\-\-recommends\fR output for more information on downloaders and Perl downloaders.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBFILTER_STRING\fR Default \fB<filter>\fR. Any string you prefer to see instead
|
|
|
|
|
for filtered values.
|
|
|
|
|
|
|
|
|
|
\fBINDENT_MIN\fR The point where the line starter wrapping to its own line happens.
|
2018-04-04 06:41:06 +00:00
|
|
|
Overrides default. See \fB\-\-indent\-min\fR. If \fB80\fR or less, wrap will never happen.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBLIMIT\fR Overrides default of \fB10\fR IP addresses per IF. This is only of interest
|
2018-04-04 06:41:06 +00:00
|
|
|
to sys admins running servers with many IP addresses.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fBPS_COUNT\fR The default number of items showing per \fB\-t\fR type, \fBm\fR or
|
|
|
|
|
\fBc\fR. Default is 5.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBSENSORS_CPU_NO\fR In cases of ambiguous temp1/temp2 (inxi can't figure out which
|
|
|
|
|
is the CPU), forces sensors to use either value 1 or 2 as CPU temperature. See the
|
2018-04-04 06:41:06 +00:00
|
|
|
above configuration page on smxi.org for full info.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBSEP2_CONSOLE\fR Replaces default key / value separator of '\fB:\fR'.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
It's best to use the \fB\-c [94\-99]\fR color selector tool to set the following values
|
2018-04-06 22:52:08 +00:00
|
|
|
because it will correctly update the configuration file and remove any invalid
|
|
|
|
|
or conflicting items, but if you prefer to create your own configuration files,
|
|
|
|
|
here are the options. All take the integer value from the options available in
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fB\-c 94\-99\fR.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBCONSOLE_COLOR_SCHEME\fR The color scheme for console output (not in X/Wayland).
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
\fBGLOBAL_COLOR_SCHEME\fR Overrides all other color schemes.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
|
|
|
|
\fBIRC_COLOR_SCHEME\fR Desktop X/Wayland IRC CLI color scheme.
|
|
|
|
|
|
|
|
|
|
\fBIRC_CONS_COLOR_SCHEME\fR Out of X/Wayland, IRC CLI color scheme.
|
|
|
|
|
|
|
|
|
|
\fBIRC_X_TERM_COLOR_SCHEME\fR In X/Wayland IRC client terminal color scheme.
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
\fBVIRT_TERM_COLOR_SCHEME\fR Color scheme for virtual terminal output (in X/Wayland).
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
.SH BUGS
|
|
|
|
|
Please report bugs using the following resources.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
You may be asked to run the inxi debugger tool which will upload a data dump of
|
2018-04-06 22:52:08 +00:00
|
|
|
system files for use in debugging inxi. These data dumps are very important since
|
|
|
|
|
they provide us with all the real system data inxi uses to parse out its report.
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
inxi main website/source/wiki, file an issue report:
|
New version, new tarball:
Changes: updated inxi updaters to use github locations.
I will do this commit once for googlecode, and once for github, after that,
all commits will go only to github.
inxi moves to github, despite my dislike of for profit source repos, and git,
I decided that I just don't have the time or energy to do it right, so I'm going
to use github.
The project is already moved, though I have left inxi up for the time being on
code.google.com/p/inxi until I move the wiki to http://smxi.org
Everything is pretty much the same, the project url is:
https://github.com/smxi/inxi
The direct download link for the gz is:
https://github.com/smxi/inxi/raw/master/inxi.tar.gz
git pull is:
git pull https://github.com/smxi/inxi master
svn checkout url:
https://github.com/smxi/inxi
And that's about it.
2015-08-20 23:32:57 +00:00
|
|
|
.I https://github.com/smxi/inxi/issues
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
post on inxi developer forums:
|
|
|
|
|
.I https://techpatterns.com/forums/forum\-32.html
|
2012-09-15 09:18:08 +00:00
|
|
|
.TP
|
2018-04-06 22:52:08 +00:00
|
|
|
You can also visit
|
|
|
|
|
.I irc.oftc.net
|
|
|
|
|
\fRchannel:\fI #smxi\fR to post issues.
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH HOMEPAGE
|
New version, new tarball:
Changes: updated inxi updaters to use github locations.
I will do this commit once for googlecode, and once for github, after that,
all commits will go only to github.
inxi moves to github, despite my dislike of for profit source repos, and git,
I decided that I just don't have the time or energy to do it right, so I'm going
to use github.
The project is already moved, though I have left inxi up for the time being on
code.google.com/p/inxi until I move the wiki to http://smxi.org
Everything is pretty much the same, the project url is:
https://github.com/smxi/inxi
The direct download link for the gz is:
https://github.com/smxi/inxi/raw/master/inxi.tar.gz
git pull is:
git pull https://github.com/smxi/inxi master
svn checkout url:
https://github.com/smxi/inxi
And that's about it.
2015-08-20 23:32:57 +00:00
|
|
|
.I https://github.com/smxi/inxi
|
2017-09-22 00:12:58 +00:00
|
|
|
.I https://smxi.org/
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.SH AUTHOR AND CONTRIBUTORS TO CODE
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2012-09-15 09:18:08 +00:00
|
|
|
.B inxi
|
2018-04-06 22:52:08 +00:00
|
|
|
is a fork of \fBlocsmif\fR's very clever \fBinfobash\fR script.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
|
|
|
|
Original infobash author and copyright holder:
|
2018-04-04 06:41:06 +00:00
|
|
|
Copyright (C) 2005\-2007 Michiel de Boer aka locsmif
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
inxi version: Copyright (C) 2008\-18 Harald Hope
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
This man page was originally created by Gordon Spencer (aka aus9) and is
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
maintained by Harald Hope (aka h2 or TechAdmin).
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Initial CPU logic, konversation version logic, occasional maintenance fixes,
|
|
|
|
|
and the initial xiin.py tool for /sys parsing (obsolete, but still very much
|
New version, new tarball, new man page. Deprecated xiin uploader, which completes the deprecation
of the xiin.py tool, which is going to become obsolete when python 3 fully replaces python 2.
Since the odds of perl being around and stable are far higher than the odds of xiin.py
even working on python 3, I'm getting ahead of the race. Plus Perl is nicer to work with.
And Perl is a lot faster. I mean, a lot. Not slightly.
And it also works on much older systems, and does not have that Python version < 2.6
failure due to changing Python syntax even between sub versions. xiin.py never ran on
Python 2.5 even when it was relatively recent, which is one reason I'm removing all Python
from inxi.
Basically xiin.py worked only on Python 2.6 or 2.7, period.
Oh, and also handled issue #115 by not making -B show -M data.
2017-08-23 23:14:47 +00:00
|
|
|
appreciated for all the valuable debugger data it helped generate): Scott Rogers
|
2016-12-21 03:57:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Further fixes (listed as known):
|
2016-12-21 03:57:41 +00:00
|
|
|
|
|
|
|
|
Horst Tritremmel <hjt at sidux.com>
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-04 06:41:06 +00:00
|
|
|
Steven Barrett (aka: damentz) \- USB audio patch; swap percent used patch.
|
2016-12-21 03:57:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Jarett.Stevens \- \fBdmidecode \-M\fR patch for older systems with no \fB/sys\fR.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
.SH SPECIAL THANKS TO THE FOLLOWING
|
|
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
The nice people at irc.oftc.net channels #linux\-smokers\-club and #smxi,
|
|
|
|
|
who all really have to be considered to be co\-developers because of their
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
non\-stop enthusiasm and willingness to provide real\-time testing and debugging
|
2018-04-06 22:52:08 +00:00
|
|
|
of inxi development.
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
Siduction forum members, who have helped get some features working by providing
|
|
|
|
|
a large number of datasets that have revealed possible variations, particularly for the
|
|
|
|
|
RAM \fB\-m\fR option.
|
2016-12-21 03:57:41 +00:00
|
|
|
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
AntiX users and admins, who have helped greatly with testing and debugging,
|
2018-04-06 22:52:08 +00:00
|
|
|
particularly for the 3.0.0 release.
|
2016-12-21 03:57:41 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
ArcherSeven (Max) and Iotaka, who always manage to find the weirdest or most extreme
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
hardware and setups that help make inxi much more robust.
|
|
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
For the vastly underrated skill of output error/glitch catching, Pete Haddow. His
|
|
|
|
|
patience and focus in going through inxi repeatedly to find errors and inconsistencies
|
|
|
|
|
is much appreciated.
|
New version, new man. Very new man.
Man features new section, configuration options, which lists the main config options
users would be likely to use.
This should help users who will never check the actual documentation web page
realize that there are many internal configuration options available.
Many edits in man, more to come I suspect.
Bug fixes in inxi:
1. removed a few stray debuggers that were creating debugging output
2. fixed a usb driver bug that would create warning messages from Perl (thanks Manjaro
for finding that one)
New Option:
1. Added: --indent-min - goes with the user configuration option: INDENT_MIN
and allows users to experiment with different indent settings. This is what trips the
auto line wrap of line starters. This may be revisited, and this switch will make it
easier for users to see for themselves which they prefer, what trip point, etc.
This will help determine pre 3.0.0 what the default auto wrap trip point, if any,
will be.
Added more data to debugger tool, more lsblk, which is going to need a lot more data
to solve a new issue with dm/encrypt/lvm, initial $MANPAGE data, to see if anyone
actually ever uses that environmental variable.
Special thanks to Manjaro for being as far as I know the first to package Perl inxi.
2018-03-25 01:14:24 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
All the inxi package maintainers, distro support people, forum moderators,
|
|
|
|
|
and in particular, sys admins with their particular issues, which almost always
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
help make inxi better, and any others who contribute ideas, suggestions, and patches.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
New version, new man. Beta / 2.9 testing completed.
inxi 3.0 is now ready for prime time. No substantial issues have been found over
the past week. All outstanding issues and bugs have been corrected. The man page
and help page have been edited fairly heavily to improve usability and readablity.
All work and development and support for inxi 2.3.56 is ended. No issues for
2.3.56 will be accepted since there is no way to support that version, it
being in a different set of languages (Gawk/Bash) than inxi 2.9/3.0 (Perl 5).
So the sooner you move your distro package pool to new inxi, the sooner your
users can get support for any issues with current inxi.
Beta and 2.9 prerelease testing is completed, and has resulted in a much
better inxi than I could have hoped for.
There are so many new features and enhancements in the new inxi that it's hard
to list them all. See previous commits for a more in depth record.
1. New options: --slots (PCI Slots); --usb
2. Exports to json/xml with --output options
3. Every line has been enhanced, with tighter output control, better key / value
pairings, more accurate values.
4. Line wrapping is now fully dynamic, which means inxi works down to 80 columns
and should basically never wrap (except for very long repo lines, but that's not
really fixable).
5. More controls, more user configuration options (see man page).
6. So many small new features that it's hard to list them all. Shows SSH in -I
if SSH. Shows sudo/su/login in -I if relevant and detectable. Shows disk partioning
scheme in some cases (more coming). Removes color codes if piped or redirected to
file.
7. All sizes are now shown in standardized KiB/MiB/GiB/TiB/PiB format, to avoid
ambiguity about whether M or MB or MiB is meant. All internal size math is done
using KiB, which further avoids confusion and error. Note that many disk makers
like using MB or GB instead of MiB or GiB because it makes their disks seem
'bigger'.
8. Sensors -s now supports IPMI sensors, in tandem with lm-sensors.
Anyway, the changelog will show better all the new features etc, I can't remember
them all.
All current issues and glitches have been fixed, any remaining are simply new issues,
just as they would be in old inxi.
Note that in the second and third weeks of beta testing a significant number of bugs
that are in inxi 2.3.56 were fixed. 2.3.56 has been moth-balled into the inxi-legacy
branch as binxi, to avoid mixing it up with inxi. The development branch is now
permanently inxi-perl, aka, pinxi, since that worked so well for beta and pre-3.0
2.9 testing and development.
This ends the pinxi/inxi development stage. All future development will proceed
using the inxi-perl branch, and will be the same in terms of new features as pre
inxi 2.9 was, they will be added, enhanced, as seems appropriate.
Remember, inxi is a rolling release program, like Arch Linux, Gentoo, Debian
Testing/Sid, and has no frozen release points, so this is simply the beginning of the
3.0 line of Perl inxi.
Thanks to everyone who contributed time, energy, effort, ideas, testing, debugging,
patience - inxi would not work without you.
2018-04-09 08:24:47 +00:00
|
|
|
Without a wide range of diverse Linux kernel\-based Free Desktop systems to test
|
2018-04-06 22:52:08 +00:00
|
|
|
on, we could never have gotten inxi to be as reliable and solid as it's turning
|
New version, new tarball, new man page. This is the first attempt to correct an
issue a forum poster raised, which is the fact that despite the fact that GNU/Linux
has had reasonably ok zfs support for years now, inxi only tested for zfs on bsd
systems.
This has been corrected. Due to the complexity of handling software raid, inxi
will now test first for ZFS data, if none is found, it will then test for
/proc/mdstat.
In a perfect world I'd like to have full dynamic Raid support, but I'm missing
all the key ingredients required to add that:
1. systems to test on
2. software raid, I don't use it
3. data collection for non mdraid and zfs software raid, including the values
possible to gather from all non software raid.
Basically, the only way I'd extend -R raid option is if I get direct ssh access to
a machine that uses the alternate software raid type, otherwise it would take
forever to figure out the options.
Since the number of people who might be actually running zfs and mdraid and
using inxi probably numbers in the 10 globally, I figured this solution was a fine
way to handle adding zfs without messing up mdraid, which is more common on linux.
It also does not break BSDs, since bsds as far as I know don't use mdraid, and don't
have /proc/mdraid in the first place.
Also redid the man page to add -! 41, -! 42, -! 43, -! 44 options, which bypass
curl, fetch, wget, and all of them, respectively. Plus making the lines less wide.
That should make those people who actually use 80 column wide vi as an editor
happy, lol.
2017-11-29 01:23:41 +00:00
|
|
|
out to be.
|
2012-09-15 09:18:08 +00:00
|
|
|
|
2018-04-06 22:52:08 +00:00
|
|
|
And of course, a big thanks to locsmif, who figured out a lot of the core methods,
|
New inxi, new man, new tarball.
It's here! Perl inxi, first official release. So many changes, really too many
to list.
But here's a few:
1. of course, full rewrite to Perl 5.x. Supports as old as 5.008, as new as current.
2. Better line length nandlers. Fully dynamic, robust, shrinks and expands to fit
either taste or viewport.
3. Long options for all options now, plus of course the short options everyone
is used to.
4. New options: --usb; --slots (pci slot report); --sleep (change cpu sleep time);
and many more. Check --help or man page for details.
5. Vastly improved --recommends, now does per distro package recommends, and shows
only Linux data to Linux systems, and BSD data to BSD systems.
6. Hugely improved debugger as well.
7. Far more accurate output, most output is now in key/value pairs, because:
8. inxi now exports to json and xml! See --output/--output-file for info.
9. Enhancedd repo output, added deb822 type, solus
10. Radically enhanced network data, now shows all IP / IF devices connected to
each nic, not just one, both IP v4 and v6.
11. USB audio and network device actual drivers
12. better handling of compiler data.
13. Basic ARM machine data now, if present to inxi
14. Graphics: per card driver info alongside the original xorg drivers.
15. Better integration of partitions, RAID, unmounted partitions, and HDD data.
16. Better sensors handling of free video driver sensor data, well, not better,
it's now there, along with fan speeds for gpus.
17. RAID is enhanced, and now can show > 1 RAID type on a system, and the RAID
is improved.
18. Much improved disk/partition/memory sizing, inxi now always works internally
with KB units, and changes them on output to the appropriate units.
19. Fully redone man page for all the new options and the long options.
And so much more. Anyway, here it is, the first release.
2018-03-20 10:06:46 +00:00
|
|
|
logic, and tricks originally used in inxi Gawk/Bash.
|
